Silicon(Si) materials as anode materials for applications in lithium-ion batteries(LIBs) have received increasing attention.Among the Si materials,the electrochemical properties of SiOx-based(0<x≤2)composites are ...Silicon(Si) materials as anode materials for applications in lithium-ion batteries(LIBs) have received increasing attention.Among the Si materials,the electrochemical properties of SiOx-based(0<x≤2)composites are the most prominent.However,due to the cycling stability of SiOx being far from practical,there are some problems,such as Iow initial coulombic efficiency(ICE),obvious volume expansion and poor conductivity.Researchers in various countries have optimized the electrochemical properties of SiOx-based composites by means of pore formation,surface modification,and the choice of constituents.In this review,SiOx-based composites are classified into three categories based on the valency of Si(SiO2 composites,SiO composites and SiOx(0<x<2) composites).The synthesis,morphologies and electrochemical properties of the SiOx-based composites that are applied in LIB are discussed.Finally,the prope rties of several common SiOx-based composites are briefly compared and the challenges faced by SiOx-based composites are highlight.展开更多
The finite element model is established according to the experimental results,and then the experimental results are verified by simulation calculation.In terms of the combination of finite element analysis and experim...The finite element model is established according to the experimental results,and then the experimental results are verified by simulation calculation.In terms of the combination of finite element analysis and experiment,the effect of particle size of CuO and SnO_(2) on the stress,strain and microstructure of AgCuOSnO_(2) composite during hot extrusion was studied.The results illustrate that with the decrease of particle size,the dispersion of the second phase increases gradually,while the possibility of“tail shrinkage”of the billet decreases continuously;cubic CuO will evolve to fibrosis,and the degree of fibrosis will increase with the decrease of the particle size and ring clusters.Specifically,the degree of fibrosis at the middle end of the billet is higher than that at the front end,the degree of fibrosis at the front end is higher than that at the back end,and the degree of fibrosis on the surface is higher than that in the core;part of CuO fibers will bend,and the degree of buckling strength is positively correlated with the size of particles and their annular clusters.Additionally,there is fiber CuO in the front and back end of the billet that are inconsistent with the extrusion direction,and the degree of difference was negatively correlated with the particle size.展开更多
In this paper the toughening mechanism of PVC/CPE filled with nanoscale SiO 2 and the effects of nanoscale SiO 2 and common SiO 2 contents on properties of PVC/CPE were studied.The experimental results showed PVC/CPE/...In this paper the toughening mechanism of PVC/CPE filled with nanoscale SiO 2 and the effects of nanoscale SiO 2 and common SiO 2 contents on properties of PVC/CPE were studied.The experimental results showed PVC/CPE/SiO 2 had excollent notched impact strength and tensile strength when nano SiO 2 content was 6 per cent to 12 per cent.Local SiO 2 had no obvious toughening effect on PVC/CPE,but made the tensile strength and elongation at break of PVC/CPE decreased obviously.展开更多
基金supported by the National Natural Science Foundation of China(NSFC,Nos.21671170,21673203, 21201010)the Top-notch Academic Programs Project of Jiangsu Higher Education Institutions(TAPP)+2 种基金Program for New Century Excellent Talents of the University in China(NCET,No.13-0645)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.XSJCX17-015)the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘Silicon(Si) materials as anode materials for applications in lithium-ion batteries(LIBs) have received increasing attention.Among the Si materials,the electrochemical properties of SiOx-based(0<x≤2)composites are the most prominent.However,due to the cycling stability of SiOx being far from practical,there are some problems,such as Iow initial coulombic efficiency(ICE),obvious volume expansion and poor conductivity.Researchers in various countries have optimized the electrochemical properties of SiOx-based composites by means of pore formation,surface modification,and the choice of constituents.In this review,SiOx-based composites are classified into three categories based on the valency of Si(SiO2 composites,SiO composites and SiOx(0<x<2) composites).The synthesis,morphologies and electrochemical properties of the SiOx-based composites that are applied in LIB are discussed.Finally,the prope rties of several common SiOx-based composites are briefly compared and the challenges faced by SiOx-based composites are highlight.
基金Project(2017FA027)supported by the Key Project of Science and Technology of Yunnan Province,China。
文摘The finite element model is established according to the experimental results,and then the experimental results are verified by simulation calculation.In terms of the combination of finite element analysis and experiment,the effect of particle size of CuO and SnO_(2) on the stress,strain and microstructure of AgCuOSnO_(2) composite during hot extrusion was studied.The results illustrate that with the decrease of particle size,the dispersion of the second phase increases gradually,while the possibility of“tail shrinkage”of the billet decreases continuously;cubic CuO will evolve to fibrosis,and the degree of fibrosis will increase with the decrease of the particle size and ring clusters.Specifically,the degree of fibrosis at the middle end of the billet is higher than that at the front end,the degree of fibrosis at the front end is higher than that at the back end,and the degree of fibrosis on the surface is higher than that in the core;part of CuO fibers will bend,and the degree of buckling strength is positively correlated with the size of particles and their annular clusters.Additionally,there is fiber CuO in the front and back end of the billet that are inconsistent with the extrusion direction,and the degree of difference was negatively correlated with the particle size.
文摘In this paper the toughening mechanism of PVC/CPE filled with nanoscale SiO 2 and the effects of nanoscale SiO 2 and common SiO 2 contents on properties of PVC/CPE were studied.The experimental results showed PVC/CPE/SiO 2 had excollent notched impact strength and tensile strength when nano SiO 2 content was 6 per cent to 12 per cent.Local SiO 2 had no obvious toughening effect on PVC/CPE,but made the tensile strength and elongation at break of PVC/CPE decreased obviously.
