ZnAl_(2)O_(4) and ZnAl_(2)O_(4)-based ceramics have attracted much attention from researchers due to their good microwave dielectric,thermal and mechanical properties.In this work,the influence of 5%(in mass)CuO-TiO_(...ZnAl_(2)O_(4) and ZnAl_(2)O_(4)-based ceramics have attracted much attention from researchers due to their good microwave dielectric,thermal and mechanical properties.In this work,the influence of 5%(in mass)CuO-TiO_(2)-Nb_(2)O_(5)(CTN)ternary composite oxide additives with different composition ratios on sintering behavior and properties of ZnAl_(2)O_(4) microwave dielectric ceramics was investigated.When the molar fraction ranges of Cu,Ti and Nb elements in 5%CTN additives are 0.625-0.875,0-0.250 and 0.125-0.625,respectively,sintering temperature of ZnAl_(2)O_(4) ceramics can be reduced from above 1400℃to below 1000℃.The sintering additives CN(Cu:Nb=1:1,molar ratio)and CTN(Cu:Ti:Nb=4:1:3,molar ratio)can reduce sintering temperature of ZnAl_(2)O_(4) ceramics to 975 and 1000℃,respectively,while maintaining good dielectric properties(dielectric constantε_(r)=11.36,quality factor Q׃=8245 GHz andε_(r)=9.52,Q׃=22249 GHz)and flexural strengths(200 and 161 MPa),which are expected to be applied in preparation of low temperature co-fired ceramic(LTCC)materials with copper electrodes.Low-temperature sintering of the ZnAl_(2)O_(4)+CTN system is characterized as activated sintering.Nanometer-level amorphous interfacial films containing Cu,Ti,and Nb elements are observed at the grain boundaries,which may provide fast diffusion pathways for mass transportation during the sintering process.Valence changes of Ti and Cu ions,along with changes of oxygen vacancies,are confirmed,which provides a potential mechanism for reduced sintering temperature of ZnAl_(2)O_(4) ceramics.In addition,a series of reactions occurring at the grain boundaries can activate these boundaries and further promote the sintering densification process.These results suggest a promising way to design a novel LTCC material with excellent properties based on the low temperature sintering of ceramics with the sintering aid of CuO-TiO_(2)-Nb_(2)O_(5) composite oxide.展开更多
Electrocatalytic CO_(2)reduction reaction(CO_(2)RR)to ethylene(C_(2)H_(4))represents a promising approach to reducing CO_(2)emissions and producing high-value chemicals.The ethylene productivity is always limited by t...Electrocatalytic CO_(2)reduction reaction(CO_(2)RR)to ethylene(C_(2)H_(4))represents a promising approach to reducing CO_(2)emissions and producing high-value chemicals.The ethylene productivity is always limited by the slow reaction kinetics and the high-performance catalysts are significantly desired.Many efforts have been made to develop a catalyst to activate CO_(2)molecules.However,as another reactant,H2O activation does not receive the attention it deserves.In particular,slow H2O dissociation kinetics limit the rate of proton supply,severely impairing the production of C_(2)H_(4).Here,we designed a MgO-modified CuO catalyst(MgO/CuO),which can promote H2O dissociation and enhance CO_(2)adsorption at the same time to realize the efficient ethylene production.The optimal catalyst exhibits a Faraday efficiency for C_(2)H_(4)reached 54.4%at−1.4 V vs.RHE in an H-cell,which is 1.4 times that of pure CuO(37.9%),and it was further enhanced to a 56.7%in a flow cell,with a high current density of up to 535.9 mA cm−2 at−1.0 V vs.RHE.Experimental and theoretical calculations show that MgO/CuO plays a bifunctional role in the CO_(2)RR,which facilitates the adsorption and activation of CO_(2)by CuO and simultaneously accelerates H2O dissociation by MgO doping.The in situ XRD experiments demonstrate that the introduction of MgO protects CuO active phase to avoid overreduction and preserves the active centers for CO_(2)RR.In combination with in situ FTIR and DFT calculations,the protonation process from*CO to*COH and asymmetric C–C coupling step are promoted by the enhanced water activation and proton coupling on MgO/CuO.This work provides new insights into the CO_(2)and H_(2)O coactivation mechanism in CO_(2)RR and a potential universal strategy to design ethylene production electrocatalysts.展开更多
采用沉淀法-水热法合成了电催化Bi_(2)O_(3)-CuO复合材料.利用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X-射线光电子能谱(XPS)等方法对样品的结构和形貌进行了研究.用电化学测试方法对材料电催化性能进行研究,用...采用沉淀法-水热法合成了电催化Bi_(2)O_(3)-CuO复合材料.利用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X-射线光电子能谱(XPS)等方法对样品的结构和形貌进行了研究.用电化学测试方法对材料电催化性能进行研究,用气相色谱和核磁共振氢谱对产物进行分析.电催化实验结果表明,Bi_(2)O_(3)-CuO复合材料的电催化性能及对甲酸盐的选择性远高于Bi_(2)O_(3)和CuO.其中比例为1∶1的Bi_(2)O_(3)-CuO复合材料性能最好,在-1.2 V vs.RHE的电位下,甲酸盐的法拉第效率为90.3%,电流密度为20 mA/cm^(2),测试10 h保持稳定.展开更多
基金National Natural Science Foundation of China (U24A2052)Shanghai Eastern Talent Plan。
文摘ZnAl_(2)O_(4) and ZnAl_(2)O_(4)-based ceramics have attracted much attention from researchers due to their good microwave dielectric,thermal and mechanical properties.In this work,the influence of 5%(in mass)CuO-TiO_(2)-Nb_(2)O_(5)(CTN)ternary composite oxide additives with different composition ratios on sintering behavior and properties of ZnAl_(2)O_(4) microwave dielectric ceramics was investigated.When the molar fraction ranges of Cu,Ti and Nb elements in 5%CTN additives are 0.625-0.875,0-0.250 and 0.125-0.625,respectively,sintering temperature of ZnAl_(2)O_(4) ceramics can be reduced from above 1400℃to below 1000℃.The sintering additives CN(Cu:Nb=1:1,molar ratio)and CTN(Cu:Ti:Nb=4:1:3,molar ratio)can reduce sintering temperature of ZnAl_(2)O_(4) ceramics to 975 and 1000℃,respectively,while maintaining good dielectric properties(dielectric constantε_(r)=11.36,quality factor Q׃=8245 GHz andε_(r)=9.52,Q׃=22249 GHz)and flexural strengths(200 and 161 MPa),which are expected to be applied in preparation of low temperature co-fired ceramic(LTCC)materials with copper electrodes.Low-temperature sintering of the ZnAl_(2)O_(4)+CTN system is characterized as activated sintering.Nanometer-level amorphous interfacial films containing Cu,Ti,and Nb elements are observed at the grain boundaries,which may provide fast diffusion pathways for mass transportation during the sintering process.Valence changes of Ti and Cu ions,along with changes of oxygen vacancies,are confirmed,which provides a potential mechanism for reduced sintering temperature of ZnAl_(2)O_(4) ceramics.In addition,a series of reactions occurring at the grain boundaries can activate these boundaries and further promote the sintering densification process.These results suggest a promising way to design a novel LTCC material with excellent properties based on the low temperature sintering of ceramics with the sintering aid of CuO-TiO_(2)-Nb_(2)O_(5) composite oxide.
基金supported by the National Natural Science Foundation of China(Grant No.U21B2099,U22A20425,and 22208377)Natural Science Foundation of Shandong Province(ZR2021QE062)Fundamental Research Funds for the Central Universities,Ocean University of China(grant number 202364004)。
文摘Electrocatalytic CO_(2)reduction reaction(CO_(2)RR)to ethylene(C_(2)H_(4))represents a promising approach to reducing CO_(2)emissions and producing high-value chemicals.The ethylene productivity is always limited by the slow reaction kinetics and the high-performance catalysts are significantly desired.Many efforts have been made to develop a catalyst to activate CO_(2)molecules.However,as another reactant,H2O activation does not receive the attention it deserves.In particular,slow H2O dissociation kinetics limit the rate of proton supply,severely impairing the production of C_(2)H_(4).Here,we designed a MgO-modified CuO catalyst(MgO/CuO),which can promote H2O dissociation and enhance CO_(2)adsorption at the same time to realize the efficient ethylene production.The optimal catalyst exhibits a Faraday efficiency for C_(2)H_(4)reached 54.4%at−1.4 V vs.RHE in an H-cell,which is 1.4 times that of pure CuO(37.9%),and it was further enhanced to a 56.7%in a flow cell,with a high current density of up to 535.9 mA cm−2 at−1.0 V vs.RHE.Experimental and theoretical calculations show that MgO/CuO plays a bifunctional role in the CO_(2)RR,which facilitates the adsorption and activation of CO_(2)by CuO and simultaneously accelerates H2O dissociation by MgO doping.The in situ XRD experiments demonstrate that the introduction of MgO protects CuO active phase to avoid overreduction and preserves the active centers for CO_(2)RR.In combination with in situ FTIR and DFT calculations,the protonation process from*CO to*COH and asymmetric C–C coupling step are promoted by the enhanced water activation and proton coupling on MgO/CuO.This work provides new insights into the CO_(2)and H_(2)O coactivation mechanism in CO_(2)RR and a potential universal strategy to design ethylene production electrocatalysts.
文摘采用沉淀法-水热法合成了电催化Bi_(2)O_(3)-CuO复合材料.利用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X-射线光电子能谱(XPS)等方法对样品的结构和形貌进行了研究.用电化学测试方法对材料电催化性能进行研究,用气相色谱和核磁共振氢谱对产物进行分析.电催化实验结果表明,Bi_(2)O_(3)-CuO复合材料的电催化性能及对甲酸盐的选择性远高于Bi_(2)O_(3)和CuO.其中比例为1∶1的Bi_(2)O_(3)-CuO复合材料性能最好,在-1.2 V vs.RHE的电位下,甲酸盐的法拉第效率为90.3%,电流密度为20 mA/cm^(2),测试10 h保持稳定.
