Nanometer SnO2 particles were synthesized by sol-gel dialytic processes and used as a support to prepare CuO supported catalysts via a deposition-precipitation method. The samples were characterized by means of TG-DTA...Nanometer SnO2 particles were synthesized by sol-gel dialytic processes and used as a support to prepare CuO supported catalysts via a deposition-precipitation method. The samples were characterized by means of TG-DTA, XRD, H2-TPR and XPS. The catalytic activity of the CuO/TiO2-SnO2 catalysts was markedly depended on the loading of CuO, and the optimum CuO loading was 8 wt.% （Tloo = 80 ℃）. The CuO/TiO2-SnO2 catalysts exhibited much higher catalytic activity than the CuO/TiO2 and CuO/SnO2 catalysts. H2-TPR result indicated that a large amount of CuO formed the active site for CO oxidation in 8 wt.% CuO/TiO2-SnO2 catalyst.展开更多
Nanocomposites composed of SnO2 and CuO were prepared by hydrothermal method. The microstructures of obtained SnO2-CuO powders were characterized by X-ray diffraction, scanning electron microscopy, transmission electr...Nanocomposites composed of SnO2 and CuO were prepared by hydrothermal method. The microstructures of obtained SnO2-CuO powders were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and nitrogen adsorption-desorption test. The results show that the nanocomposites exhibited coral-like nanostructure, and the average crystalline size of SnO2 was 12 nm. The specific surface area of the four samples, SnO2- 0.2CuO, SnO2-0.5CuO, SnO2-1.0CuO and SnO2-2.0CuO are 72.97, 58.77, 49.72 and 54.95 m2/g, respectively. The gas sensing performance of the four samples to ethanol, formaldehyde and H2S was studied. The sensor of SnOa-0.5CuO exhibited high response to hydrogen sulfide （4173 to 10 ppm H2S, where ppm represent 10-6）, and low response to ethanol and formaldehyde. The good selectivity exhibited that the SnO2-0.5CuO nanocomposite can be a promising candidate for highly sensitive and selective gas-sensing material to H2S.展开更多
SnO2-CuO nanocomposite powders were prepared by chemical coprecipitation method using SnCl4·5H2O, NH3·H2O and Cu(NO3)2·3H2O as raw materials. The powders were characterized by thermogravimertric(TG) ana...SnO2-CuO nanocomposite powders were prepared by chemical coprecipitation method using SnCl4·5H2O, NH3·H2O and Cu(NO3)2·3H2O as raw materials. The powders were characterized by thermogravimertric(TG) analysis and differential thermal analysis(DTA), X-ray diffraction(XRD), and scanning electron microscope(SEM). The electrochemical properties of SnO2-CuO and undoped SnO2 powders as anode materials of lithium ion batteries were investigated comparatively by galvanostatic charge-discharge experiments and AC impedance. The results show that SnO2-CuO nanocomposite powders with the average particle size of 87 nm can be obtained by this method. The structure of SnO2 does not change with the introduction of CuO, but the average particle size of nano-SnO2 decreases. SnO2-CuO nanocomposite powders show a reversible capacity of 752 mA·h/g and better cycleability compared with nano-SnO2. The capacity retention rates after 60 cycles of nano-SnO2-CuO and SnO2 are 93.6% and 92.0% at the charge- discharge rate of 0.1 C, respectively, which suggests that the introduction of CuO into SnO2 can improve the cycleability of nano- SnO2.展开更多
基金supported by the National Natural Science Foundation of China (20771061 and 20871071)the 973 Program (2005CB623607)Science and Technology Commission Foundation of Tianjin (08JCYBJC00100 and 09JCYBJC03600)
文摘Nanometer SnO2 particles were synthesized by sol-gel dialytic processes and used as a support to prepare CuO supported catalysts via a deposition-precipitation method. The samples were characterized by means of TG-DTA, XRD, H2-TPR and XPS. The catalytic activity of the CuO/TiO2-SnO2 catalysts was markedly depended on the loading of CuO, and the optimum CuO loading was 8 wt.% （Tloo = 80 ℃）. The CuO/TiO2-SnO2 catalysts exhibited much higher catalytic activity than the CuO/TiO2 and CuO/SnO2 catalysts. H2-TPR result indicated that a large amount of CuO formed the active site for CO oxidation in 8 wt.% CuO/TiO2-SnO2 catalyst.
基金financially supported by the National Natural Science Foundation of China (No. 51072141)the scientific research projects of Education Department of Hubei province (D20141503)the President Foundation of Wuhan Institute of Technology (No. 2014029)
文摘Nanocomposites composed of SnO2 and CuO were prepared by hydrothermal method. The microstructures of obtained SnO2-CuO powders were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and nitrogen adsorption-desorption test. The results show that the nanocomposites exhibited coral-like nanostructure, and the average crystalline size of SnO2 was 12 nm. The specific surface area of the four samples, SnO2- 0.2CuO, SnO2-0.5CuO, SnO2-1.0CuO and SnO2-2.0CuO are 72.97, 58.77, 49.72 and 54.95 m2/g, respectively. The gas sensing performance of the four samples to ethanol, formaldehyde and H2S was studied. The sensor of SnOa-0.5CuO exhibited high response to hydrogen sulfide （4173 to 10 ppm H2S, where ppm represent 10-6）, and low response to ethanol and formaldehyde. The good selectivity exhibited that the SnO2-0.5CuO nanocomposite can be a promising candidate for highly sensitive and selective gas-sensing material to H2S.
基金Project(05C140) supported by the Scientific Research Fund of Hunan Provincial Education Department
文摘SnO2-CuO nanocomposite powders were prepared by chemical coprecipitation method using SnCl4·5H2O, NH3·H2O and Cu(NO3)2·3H2O as raw materials. The powders were characterized by thermogravimertric(TG) analysis and differential thermal analysis(DTA), X-ray diffraction(XRD), and scanning electron microscope(SEM). The electrochemical properties of SnO2-CuO and undoped SnO2 powders as anode materials of lithium ion batteries were investigated comparatively by galvanostatic charge-discharge experiments and AC impedance. The results show that SnO2-CuO nanocomposite powders with the average particle size of 87 nm can be obtained by this method. The structure of SnO2 does not change with the introduction of CuO, but the average particle size of nano-SnO2 decreases. SnO2-CuO nanocomposite powders show a reversible capacity of 752 mA·h/g and better cycleability compared with nano-SnO2. The capacity retention rates after 60 cycles of nano-SnO2-CuO and SnO2 are 93.6% and 92.0% at the charge- discharge rate of 0.1 C, respectively, which suggests that the introduction of CuO into SnO2 can improve the cycleability of nano- SnO2.
