In this paper,we study the semi-discrete mortar upwind finite volume element method with the Crouzeix-Raviart element for the parabolic convection diffusion problems. It is proved that the semi-discrete mortar upwind ...In this paper,we study the semi-discrete mortar upwind finite volume element method with the Crouzeix-Raviart element for the parabolic convection diffusion problems. It is proved that the semi-discrete mortar upwind finite volume element approximations derived are convergent in the H^1-and L^2-norms.展开更多
To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fract...To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.展开更多
Neurodegenerative diseases cause great medical and economic burdens for both patients and society;however, the complex molecular mechanisms thereof are not yet well understood. With the development of high-coverage se...Neurodegenerative diseases cause great medical and economic burdens for both patients and society;however, the complex molecular mechanisms thereof are not yet well understood. With the development of high-coverage sequencing technology, researchers have started to notice that genomic repeat regions, previously neglected in search of disease culprits, are active contributors to multiple neurodegenerative diseases. In this review, we describe the association between repeat element variants and multiple degenerative diseases through genome-wide association studies and targeted sequencing. We discuss the identification of disease-relevant repeat element variants, further powered by the advancement of long-read sequencing technologies and their related tools, and summarize recent findings in the molecular mechanisms of repeat element variants in brain degeneration, such as those causing transcriptional silencing or RNA-mediated gain of toxic function. Furthermore, we describe how in silico predictions using innovative computational models, such as deep learning language models, could enhance and accelerate our understanding of the functional impact of repeat element variants. Finally, we discuss future directions to advance current findings for a better understanding of neurodegenerative diseases and the clinical applications of genomic repeat elements.展开更多
Liquid crystal Pacharatnam-Berry phase optical elements(PBOEs)have found promising applications in augmented reality and virtual reality because of their slim formfactor,lightweight,and high optical efficiency.However...Liquid crystal Pacharatnam-Berry phase optical elements(PBOEs)have found promising applications in augmented reality and virtual reality because of their slim formfactor,lightweight,and high optical efficiency.However,chromatic aberration remains a serious longstanding problem for diffractive optics,hindering their broader adoption.To overcome the chromatic aberrations for red,green and blue(RGB)light sources,in this paper,we propose a counterintuitive multi-twist structure to achieve narrowband PBOEs without crosstalk,which plays a vital role to eliminate the chromatic aberration.The performance of our designed and fabricated narrowband Pacharatnam-Berry lenses(PBLs)aligns well with our simulation results.Furthermore,in a feasibility demonstration experiment using a laser projector,our proposed PBL system indeed exhibits a diminished chromatic aberration as compared to a broadband PBL.Additionally,polarization raytracing is implemented to demonstrate the versatility of the multi-twist structure for designing any RGB wavelengths with high contrast ratios.This analysis explores the feasibility of using RGB laser lines and quantum dot light-emitting diodes.Overall,our approach enables high optical efficiency,low fabrication complexity,and high degree of design freedom to accommodate any liquid crystal material and RGB light sources,holding immense potential for widespread applications of achromatic PBOEs.展开更多
As a new type of production factor in healthcare,healthcare data elements have been rapidly integrated into various health production processes,such as clinical assistance,health management,biological testing,and oper...As a new type of production factor in healthcare,healthcare data elements have been rapidly integrated into various health production processes,such as clinical assistance,health management,biological testing,and operation and supervision[1,2].Healthcare data elements include biolog.ical and clinical data that are related to disease,environ-mental health data that are associated with life,and operational and healthcare management data that are related to healthcare activities(Figure 1).Activities such as the construction of a data value assessment system,the devel-opment of a data circulation and sharing platform,and the authorization of data compliance and operation products support the strong growth momentum of the market for health care data elements in China[3].展开更多
In this paper,potent index of an element and pseudo clean rings are considered.Some properties and examples of pseudo clean rings are given.We also show that Zm is pseudo clean for every 2≤m∈Z and pseudo clean rings...In this paper,potent index of an element and pseudo clean rings are considered.Some properties and examples of pseudo clean rings are given.We also show that Zm is pseudo clean for every 2≤m∈Z and pseudo clean rings are clean.Furthermore,we prove pseudo clean rings are directly finite and have stable range one.展开更多
The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the ...The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.展开更多
This work focused on determining the physico-chemical characteristics (pH, carbon and nitrogen) and trace metal elements (TMEs) content (As, Sb, Cd, Hg, Ni, Pb, Cr, Zn) of soils in the Brazzaville city. Soil samples w...This work focused on determining the physico-chemical characteristics (pH, carbon and nitrogen) and trace metal elements (TMEs) content (As, Sb, Cd, Hg, Ni, Pb, Cr, Zn) of soils in the Brazzaville city. Soil samples were taken from a depth of 0 to 20 cm using a hand auger on both banks of five tributaries of the Congo River (Djoué, Mfilou, Mfoa, Tsiémé, Djiri) that flow through the city of Brazzaville. 90 sampling points were defined, with 3 points 250 m apart on the banks and located, for each river, at three sites: upstream, midstream and downstream. Finally, 15 composite samples representative of the study area were taken. The average pH values of the water varied between 6.5 and 7.5. These pH values show that the soils studied are neutral. Total carbon content varied between 0.7% (Djiri) and 1.6% (Djoué). Total nitrogen content ranged from 0.08% (Djiri) to 0.12% (Djoué). TMEs contents varied from 0.5 to 1.8 mg/kg for Sb, from 0.5 to 2.5 mg/kg for As, from 0.1 to 0.18 mg/kg for Cd, from 4.2 to 11.3 mg/kg for Cr, from 0.07 to 0.27 mg/kg for Hg, from 0.7 to 2.4 mg/kg for Ni, from 0 to 158 mg/kg for Pb and from 16 to 105 mg/kg for Zn. The lowest TMEs levels were observed in the soils of the Djiri river, while the highest levels were observed in the soils of the Djoué and Tsiémé rivers. The ANOVA and Bonferroni test did not show significant differences in the means of the parameters measured (p > 0.05). The TMEs levels were below the accepted standards (NF U44-041), with the exception of Pb, which had high levels downstream of the Djoué. According to the pollution index values calculated using soil TME content, the soils on the banks of the Djoué river are considered polluted, while those on the banks of the Tsiémé river are moderately polluted, those on the banks of the Mfoa and Mfilou rivers are slightly polluted, and the soils on the banks of Djiri river are unpolluted.展开更多
The presence of inorganic constituents in coal is controlled by different geological factors,which,in turn,affect the technological,environmental,and health impacts of the coal.The main aim of this study is to objecti...The presence of inorganic constituents in coal is controlled by different geological factors,which,in turn,affect the technological,environmental,and health impacts of the coal.The main aim of this study is to objectively assess the mineralogical and geochemical characteristics of a thickest low-rank coal seam in the Lower Indus Basin southeastern Pakistan,and further investigate different controlling factors.The analytical results of major oxides,trace elements,and rare earth elements revealed that the weathering conditions were progressively variable and moderate.The sediment source,mainly of felsic and intermediate composition,was dominated by granitic rocks.The geochemical assessment reveals different depositional factors like marine environment influenced,while transitional and freshwater sediments influenced the center of the coal peat mire.Strontium,Zinc,and several hazardous trace elements,including Cu,Ni,Cr,and Co,have higher concentrations in these coals compared to world low-rank,U.S.,and Chinese coals.The relatively higher concentration of Sr in the thick coal seam in the Lower Indus Basin,compared to other coals seams in Pakistan and the enrichment of Sr was primarily controlled by the denudation of crystalline rocks and marine influx in the coal-basin.The REY distribution pattern showed that enrichment of medium and heavy rare earth elements is higher than light rare earth elements in the coal seam.The Gd distribution pattern in the coal seam demonstrated that strong positive anomalies had a good affinity with paleo-acidic water concentration in the study area.The higher concentration of Sr and other elements enables a better assessment understanding of the coal geochemical history.展开更多
Introduction: During pregnancy, the increased demand for all the nutrients required for the development of the foetus means that the maternal stock of trace elements and minerals may become unbalanced if dietary intak...Introduction: During pregnancy, the increased demand for all the nutrients required for the development of the foetus means that the maternal stock of trace elements and minerals may become unbalanced if dietary intake fails to compensate. The aim of this research is to determine the status of trace elements (calcium, copper, magnesium, selenium and zinc) in pregnant women in the city of Kisangani. Methods: We carried out an analytical cross-sectional study of non-pregnant and pregnant women living in Kisangani, from 05 October 2023 to 05 January 2024. Concentrations of trace elements in sera were analysed using an inductively coupled plasma mass spectrophotometer (ICP-MS Agilent 7700X). Statistical analysis of the data was performed using R software version 4.3.0. Results: The mean age was 26.3 ± 6.7 years;the mean copper and magnesium levels in the serum of pregnant women were 12.58 ± 1.13 micromol/l and 1.03 ± 1.03 mmol/l respectively. The medians for calcium and zinc were 1.49 mmol/l and 8.42 micromol/l. The selenium mode was 0.41 micromol/l. Variations in trace element levels in sera of pregnant women were 0.94 - 2.22 mmol/l for calcium;0.31 - 0.78 micromol/l for selenium;and 7.29 - 12.72 micromol/l for zinc;11.04 - 14.99 micromol/l for copper, and 0.082 - 1.05 mmol/l for magnesium. Conclusion: Serum trace element concentrations in pregnant women were lower than those observed in non-pregnant women. Trace element reserves in pregnant women depended on their nutrient status prior to pregnancy, hence, there was an urgent need for trace element balance prior to pregnancy.展开更多
Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this devic...Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.展开更多
Nanomaterials have garnered recognition for their notable surface effects and demonstration of superior mechanical properties.Previous studies on the surface effects of nanomaterials,employing the finite element metho...Nanomaterials have garnered recognition for their notable surface effects and demonstration of superior mechanical properties.Previous studies on the surface effects of nanomaterials,employing the finite element method,often relied on simplified twodimensional models due to theoretical complexities.Consequently,these simplified models inadequately represent the mechanical properties of nanomaterials and fail to capture the substantial impact of surface effects,particularly the curvature dependence of nanosurfaces.This study applies the principle of minimum energy and leverages the Steigmann-Ogden surface theory of nanomaterials to formulate a novel finite element surface element that comprehensively accounts for surface effects.We conducted an analysis of the stress distribution and deformation characteristics of four typical 2D and 3D nanomaterial models.The accuracy of the developed surface element and finite element calculation method was verified through comparison with established references.The resulting finite element model provides a robust and compelling scientific approach for accurately predicting the mechanical performance of nanomaterials.展开更多
Design a precision electroplating mechanical structure for automobiles based on finite element analysis method and analyze its mechanical properties.Taking the automobile steering knuckle as the research object,ABAQUS...Design a precision electroplating mechanical structure for automobiles based on finite element analysis method and analyze its mechanical properties.Taking the automobile steering knuckle as the research object,ABAQUS parametric modeling technology is used to construct its three-dimensional geometric model,and geometric simplification is carried out.Two surface treatment processes,HK-35 zinc nickel alloy electroplating and pure zinc electroplating,were designed,and the influence of different coatings on the mechanical properties of steering knuckles was compared and analyzed through numerical simulation.At the same time,standard specimens were prepared for salt spray corrosion testing and scratch method combined strength testing to verify the numerical simulation results.The results showed that under emergency braking and composite working conditions,the peak Von Mises stress of the zinc nickel alloy coating was 119.85 MPa,which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Its equivalent strain value was 652×10^(-6),which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Experimental data confirms that zinc nickel alloy coatings exhibit significant advantages in stress distribution uniformity,strain performance,and load-bearing capacity in high stress zones.The salt spray corrosion test further indicates that the coating has superior corrosion resistance and coating substrate interface bonding strength,which can significantly improve the mechanical stability and long-term reliability of automotive precision electroplating mechanical structures.展开更多
Element Transfer Reaction(ETR)theory is a new fundamental theory guiding the design of synthetic routes.It analyses problems from a brand-new perspective of element circulation,decomposing the factors affecting synthe...Element Transfer Reaction(ETR)theory is a new fundamental theory guiding the design of synthetic routes.It analyses problems from a brand-new perspective of element circulation,decomposing the factors affecting synthetic efficiency into three elements:element sources,driving force,and output.Different from the retrosynthetic analysis method and the atom economy theory,the ETR theory places more emphasis on examining the problem as a whole and comprehensively considering various factors involved in industrial applications.This perspective intends to elaborate on the scientific connotation of the ETR theory and explore its characteristics by discussing the practical application cases.展开更多
A modified inner-element edge-based smoothed finite element method(IES-FEM)is developed and integrated with ABAQUS using a user-defined element(UEL)in this study.Initially,the smoothing domain discretization of IES-FE...A modified inner-element edge-based smoothed finite element method(IES-FEM)is developed and integrated with ABAQUS using a user-defined element(UEL)in this study.Initially,the smoothing domain discretization of IES-FEM is described and compared with ES-FEM.A practical modification of IES-FEM is then introduced that used the technique employed by ES-FEM for the nodal strain calculation.The differences in the strain computation among ES-FEM,IES-FEM,and FEM are then discussed.The modified IES-FEM exhibited superior performance in displacement and a slight advantage in stress compared to FEM using the same mesh according to the results obtained from both the regular and irregular elements.The robustness of the IES-FEM to severely deformed meshes was also verified.展开更多
Under the starry night,a fashion extravaganza was staged in Lhasa.The Fashion Night is a local fashion show in Xizang combining tradition and innovation as well as modernity and international flavor.By providing them ...Under the starry night,a fashion extravaganza was staged in Lhasa.The Fashion Night is a local fashion show in Xizang combining tradition and innovation as well as modernity and international flavor.By providing them with opportunities to present their art works to more audiences,it built a platform for young Tibetan designers for their careers to take root and blossom on the plateau.It is also aimed to bring more people to pay attention to the fashion culture of Xizang,and infuse new vitality into the development of local fashion industry.展开更多
The data production elements are driving profound transformations in the real economy across production objects,methods,and tools,generating significant economic effects such as industrial structure upgrading.This pap...The data production elements are driving profound transformations in the real economy across production objects,methods,and tools,generating significant economic effects such as industrial structure upgrading.This paper aims to reveal the impact mechanism of the data elements on the“three transformations”(high-end,intelligent,and green)in the manufacturing sector,theoretically elucidating the intrinsic mechanisms by which the data elements influence these transformations.The study finds that the data elements significantly enhance the high-end,intelligent,and green levels of China's manufacturing industry.In terms of the pathways of impact,the data elements primarily influence the development of high-tech industries and overall green technological innovation,thereby affecting the high-end,intelligent,and green transformation of the industry.展开更多
In this paper,core samples from the Well LS33 in the deep-water area of the Qiongdongnan Basin(QDNB)in the South China Sea were selected and analyzed by group(authigenic carbonate and terrigenous detritus)to obtain th...In this paper,core samples from the Well LS33 in the deep-water area of the Qiongdongnan Basin(QDNB)in the South China Sea were selected and analyzed by group(authigenic carbonate and terrigenous detritus)to obtain the contents of rare earth elements(REE)to explore the degree of preservation of paleo-seawater information by carbonate components and elucidate the provenance relationship between the QDNB and the Yinggehai Basin and the provenance changes in the deep-water area of the QDNB since the Oligocene.The main achievements of this paper are as follows:(1)In the process of extracting the autogenic carbonate,the iron-manganese oxide envelope on the surface of the sediment particles(which can adsorb REE or its complexes in seawater)will partially dissolve into the autogenic carbonate components,thus covering the REE geochem-ical information of paleo-seawater carried by the auto-genic carbonate.Therefore,caution should be exercised when using the geochemical characteristics of REE in the carbonate component of impure carbonate rocks to reflect the sedimentary paleoenvironment.(2)The analysis of the REE geochemical characteristics of multiple cores in the Ying-gehai-QDNB shows that there is a close provenance rela-tionship between the two Basins.The sediments in the central depression area of the Yinggehai Basin and the deep-water area in the western part of the QDNB generally contain more feldspar(Eu-rich)minerals.Since the Eocene,paleo-rivers have carried ultramafic-mafic materials originating from the western South China Sea into the sea.Affected by the transport distance and sea level changes,the content of feldspar(Eu-rich)minerals in the sediments of the QDNB from west to east gradually decreased.展开更多
Rare earth elements(REEs)play a crucial role in many technologies from daily appliances in cell phones to more advanced wind turbines and electric cars.Permanent magnets account for a quarter of total global REEs prod...Rare earth elements(REEs)play a crucial role in many technologies from daily appliances in cell phones to more advanced wind turbines and electric cars.Permanent magnets account for a quarter of total global REEs production and have high recycling value.In this study,smelting process was used to selectively oxidize REEs in the permanent magnets by adding Fe_(2)O_(3).This separates REEs into a slag phase from an iron-rich metallic phase.B_(2)O_(3) was also added to the system as a flux to lower the slag melting temperature.This minimizes REEs loss to the metallic phase and allows a more efficient phase separation.The effect of flux and oxidizing agent addition was investigated on both regular and cerium-rich NdFeB(NdCeFeB)magnets.At 1350℃and for 1 h,the slag phase was successfully separated from the metallic phase with the addition of 0.8 stoichiometric amount of Fe_(2)O_(3) and 40 wt%of B_(2)O_(3).Scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDX)analysis reveals that REEs in the magnet do not migrate to the metal phase while the REE-rich slag phase contains almost no iron.After the selective removal of iron into the metallic phase,REEs are recovered from the slag phase through an acid leaching process allowing>99%of REEs recovery.Boron in the magnet can also be recovered as useful boric acid by evaporation and crystallisation technique.The proposed process in this study is reagent and energy-efficient with almost complete valorisation of both NdCeFeB and NdFeB magnets.展开更多
The effect of alloying elements on the properties of magnesium(Mg)matrix composites is significant.The distribution of alloy elements between the matrix and the reinforcements plays a pivotal role in the element selec...The effect of alloying elements on the properties of magnesium(Mg)matrix composites is significant.The distribution of alloy elements between the matrix and the reinforcements plays a pivotal role in the element selection and compositional design of Mg-based metal matrix composite.This work used thermodynamics to study the equilibrium distribution coefficients of the 40 elements X(Be,Ca,Zn,Sn,REs,etc.)in the Mg-Ti and Mg-Zr systems at 573 K,773 K and 973 K.In addition,the binary solution enthalpies were evaluated using the Miedema model to predict the bonding tendency of the element X with Mg,Ti and Zr.These research outputs provide valuable data and theoretical reference for Mg-alloy design and optimization.展开更多
文摘In this paper,we study the semi-discrete mortar upwind finite volume element method with the Crouzeix-Raviart element for the parabolic convection diffusion problems. It is proved that the semi-discrete mortar upwind finite volume element approximations derived are convergent in the H^1-and L^2-norms.
基金funded by the project of the Major Scientific and Technological Projects of CNOOC in the 14th Five-Year Plan(No.KJGG2022-0701)the CNOOC Research Institute(No.2020PFS-03).
文摘To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.
基金supported by the National Natural Science Foundation of China, No.61932008Natural Science Foundation of Shanghai, No.21ZR1403200 (both to JC)。
文摘Neurodegenerative diseases cause great medical and economic burdens for both patients and society;however, the complex molecular mechanisms thereof are not yet well understood. With the development of high-coverage sequencing technology, researchers have started to notice that genomic repeat regions, previously neglected in search of disease culprits, are active contributors to multiple neurodegenerative diseases. In this review, we describe the association between repeat element variants and multiple degenerative diseases through genome-wide association studies and targeted sequencing. We discuss the identification of disease-relevant repeat element variants, further powered by the advancement of long-read sequencing technologies and their related tools, and summarize recent findings in the molecular mechanisms of repeat element variants in brain degeneration, such as those causing transcriptional silencing or RNA-mediated gain of toxic function. Furthermore, we describe how in silico predictions using innovative computational models, such as deep learning language models, could enhance and accelerate our understanding of the functional impact of repeat element variants. Finally, we discuss future directions to advance current findings for a better understanding of neurodegenerative diseases and the clinical applications of genomic repeat elements.
基金supports from the National Key Research and Development Program of China(2023YFB2806803)the National Natural Science Foundation of China(62075127).
文摘Liquid crystal Pacharatnam-Berry phase optical elements(PBOEs)have found promising applications in augmented reality and virtual reality because of their slim formfactor,lightweight,and high optical efficiency.However,chromatic aberration remains a serious longstanding problem for diffractive optics,hindering their broader adoption.To overcome the chromatic aberrations for red,green and blue(RGB)light sources,in this paper,we propose a counterintuitive multi-twist structure to achieve narrowband PBOEs without crosstalk,which plays a vital role to eliminate the chromatic aberration.The performance of our designed and fabricated narrowband Pacharatnam-Berry lenses(PBLs)aligns well with our simulation results.Furthermore,in a feasibility demonstration experiment using a laser projector,our proposed PBL system indeed exhibits a diminished chromatic aberration as compared to a broadband PBL.Additionally,polarization raytracing is implemented to demonstrate the versatility of the multi-twist structure for designing any RGB wavelengths with high contrast ratios.This analysis explores the feasibility of using RGB laser lines and quantum dot light-emitting diodes.Overall,our approach enables high optical efficiency,low fabrication complexity,and high degree of design freedom to accommodate any liquid crystal material and RGB light sources,holding immense potential for widespread applications of achromatic PBOEs.
基金supported by National Natural Science Foundation of China(Grants 72474022,71974011,72174022,71972012,71874009)"BIT think tank"Promotion Plan of Science and Technology Innovation Program of Beijing Institute of Technology(Grants 2024CX14017,2023CX13029).
文摘As a new type of production factor in healthcare,healthcare data elements have been rapidly integrated into various health production processes,such as clinical assistance,health management,biological testing,and operation and supervision[1,2].Healthcare data elements include biolog.ical and clinical data that are related to disease,environ-mental health data that are associated with life,and operational and healthcare management data that are related to healthcare activities(Figure 1).Activities such as the construction of a data value assessment system,the devel-opment of a data circulation and sharing platform,and the authorization of data compliance and operation products support the strong growth momentum of the market for health care data elements in China[3].
基金Supported by National Natural Science Foundation of China(12301041)。
文摘In this paper,potent index of an element and pseudo clean rings are considered.Some properties and examples of pseudo clean rings are given.We also show that Zm is pseudo clean for every 2≤m∈Z and pseudo clean rings are clean.Furthermore,we prove pseudo clean rings are directly finite and have stable range one.
基金supported by the National Key R&D Program of China(No.2022YFB2404400)the National Natural Science Foundation of China(Nos.U23A20577,52372168,92263206 and 21975006)+1 种基金the“The Youth Beijing Scholars program”(No.PXM2021_014204_000023)the Beijing Natural Science Foundation(Nos.2222001 and KM202110005009).
文摘The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.
文摘This work focused on determining the physico-chemical characteristics (pH, carbon and nitrogen) and trace metal elements (TMEs) content (As, Sb, Cd, Hg, Ni, Pb, Cr, Zn) of soils in the Brazzaville city. Soil samples were taken from a depth of 0 to 20 cm using a hand auger on both banks of five tributaries of the Congo River (Djoué, Mfilou, Mfoa, Tsiémé, Djiri) that flow through the city of Brazzaville. 90 sampling points were defined, with 3 points 250 m apart on the banks and located, for each river, at three sites: upstream, midstream and downstream. Finally, 15 composite samples representative of the study area were taken. The average pH values of the water varied between 6.5 and 7.5. These pH values show that the soils studied are neutral. Total carbon content varied between 0.7% (Djiri) and 1.6% (Djoué). Total nitrogen content ranged from 0.08% (Djiri) to 0.12% (Djoué). TMEs contents varied from 0.5 to 1.8 mg/kg for Sb, from 0.5 to 2.5 mg/kg for As, from 0.1 to 0.18 mg/kg for Cd, from 4.2 to 11.3 mg/kg for Cr, from 0.07 to 0.27 mg/kg for Hg, from 0.7 to 2.4 mg/kg for Ni, from 0 to 158 mg/kg for Pb and from 16 to 105 mg/kg for Zn. The lowest TMEs levels were observed in the soils of the Djiri river, while the highest levels were observed in the soils of the Djoué and Tsiémé rivers. The ANOVA and Bonferroni test did not show significant differences in the means of the parameters measured (p > 0.05). The TMEs levels were below the accepted standards (NF U44-041), with the exception of Pb, which had high levels downstream of the Djoué. According to the pollution index values calculated using soil TME content, the soils on the banks of the Djoué river are considered polluted, while those on the banks of the Tsiémé river are moderately polluted, those on the banks of the Mfoa and Mfilou rivers are slightly polluted, and the soils on the banks of Djiri river are unpolluted.
基金supported by the National Natural Science Foundation of China,funding numbers 41690131,41572327,51874280 and 5264015.
文摘The presence of inorganic constituents in coal is controlled by different geological factors,which,in turn,affect the technological,environmental,and health impacts of the coal.The main aim of this study is to objectively assess the mineralogical and geochemical characteristics of a thickest low-rank coal seam in the Lower Indus Basin southeastern Pakistan,and further investigate different controlling factors.The analytical results of major oxides,trace elements,and rare earth elements revealed that the weathering conditions were progressively variable and moderate.The sediment source,mainly of felsic and intermediate composition,was dominated by granitic rocks.The geochemical assessment reveals different depositional factors like marine environment influenced,while transitional and freshwater sediments influenced the center of the coal peat mire.Strontium,Zinc,and several hazardous trace elements,including Cu,Ni,Cr,and Co,have higher concentrations in these coals compared to world low-rank,U.S.,and Chinese coals.The relatively higher concentration of Sr in the thick coal seam in the Lower Indus Basin,compared to other coals seams in Pakistan and the enrichment of Sr was primarily controlled by the denudation of crystalline rocks and marine influx in the coal-basin.The REY distribution pattern showed that enrichment of medium and heavy rare earth elements is higher than light rare earth elements in the coal seam.The Gd distribution pattern in the coal seam demonstrated that strong positive anomalies had a good affinity with paleo-acidic water concentration in the study area.The higher concentration of Sr and other elements enables a better assessment understanding of the coal geochemical history.
文摘Introduction: During pregnancy, the increased demand for all the nutrients required for the development of the foetus means that the maternal stock of trace elements and minerals may become unbalanced if dietary intake fails to compensate. The aim of this research is to determine the status of trace elements (calcium, copper, magnesium, selenium and zinc) in pregnant women in the city of Kisangani. Methods: We carried out an analytical cross-sectional study of non-pregnant and pregnant women living in Kisangani, from 05 October 2023 to 05 January 2024. Concentrations of trace elements in sera were analysed using an inductively coupled plasma mass spectrophotometer (ICP-MS Agilent 7700X). Statistical analysis of the data was performed using R software version 4.3.0. Results: The mean age was 26.3 ± 6.7 years;the mean copper and magnesium levels in the serum of pregnant women were 12.58 ± 1.13 micromol/l and 1.03 ± 1.03 mmol/l respectively. The medians for calcium and zinc were 1.49 mmol/l and 8.42 micromol/l. The selenium mode was 0.41 micromol/l. Variations in trace element levels in sera of pregnant women were 0.94 - 2.22 mmol/l for calcium;0.31 - 0.78 micromol/l for selenium;and 7.29 - 12.72 micromol/l for zinc;11.04 - 14.99 micromol/l for copper, and 0.082 - 1.05 mmol/l for magnesium. Conclusion: Serum trace element concentrations in pregnant women were lower than those observed in non-pregnant women. Trace element reserves in pregnant women depended on their nutrient status prior to pregnancy, hence, there was an urgent need for trace element balance prior to pregnancy.
文摘Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.
基金supported by the Jiangsu Funding Program for Excellent Postdoctoral Talent (Grant No.2023ZB397)the Project funded by China Postdoctoral Science Foundation (Grant No.2023M732986).
文摘Nanomaterials have garnered recognition for their notable surface effects and demonstration of superior mechanical properties.Previous studies on the surface effects of nanomaterials,employing the finite element method,often relied on simplified twodimensional models due to theoretical complexities.Consequently,these simplified models inadequately represent the mechanical properties of nanomaterials and fail to capture the substantial impact of surface effects,particularly the curvature dependence of nanosurfaces.This study applies the principle of minimum energy and leverages the Steigmann-Ogden surface theory of nanomaterials to formulate a novel finite element surface element that comprehensively accounts for surface effects.We conducted an analysis of the stress distribution and deformation characteristics of four typical 2D and 3D nanomaterial models.The accuracy of the developed surface element and finite element calculation method was verified through comparison with established references.The resulting finite element model provides a robust and compelling scientific approach for accurately predicting the mechanical performance of nanomaterials.
文摘Design a precision electroplating mechanical structure for automobiles based on finite element analysis method and analyze its mechanical properties.Taking the automobile steering knuckle as the research object,ABAQUS parametric modeling technology is used to construct its three-dimensional geometric model,and geometric simplification is carried out.Two surface treatment processes,HK-35 zinc nickel alloy electroplating and pure zinc electroplating,were designed,and the influence of different coatings on the mechanical properties of steering knuckles was compared and analyzed through numerical simulation.At the same time,standard specimens were prepared for salt spray corrosion testing and scratch method combined strength testing to verify the numerical simulation results.The results showed that under emergency braking and composite working conditions,the peak Von Mises stress of the zinc nickel alloy coating was 119.85 MPa,which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Its equivalent strain value was 652×10^(-6),which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Experimental data confirms that zinc nickel alloy coatings exhibit significant advantages in stress distribution uniformity,strain performance,and load-bearing capacity in high stress zones.The salt spray corrosion test further indicates that the coating has superior corrosion resistance and coating substrate interface bonding strength,which can significantly improve the mechanical stability and long-term reliability of automotive precision electroplating mechanical structures.
基金Industry Foresight and Key Core Technology(No.YZ2023019)Cooperation Project of Yangzhou City with Yangzhou University(No.YZ2023209)+3 种基金Sichuan Tianfu Talent Programme(No.A.2200732)Chengdu Rongpiao Talent Programme(No.1043)SeleValley Scholars Basic Research Project(No.2301)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)for financial support。
文摘Element Transfer Reaction(ETR)theory is a new fundamental theory guiding the design of synthetic routes.It analyses problems from a brand-new perspective of element circulation,decomposing the factors affecting synthetic efficiency into three elements:element sources,driving force,and output.Different from the retrosynthetic analysis method and the atom economy theory,the ETR theory places more emphasis on examining the problem as a whole and comprehensively considering various factors involved in industrial applications.This perspective intends to elaborate on the scientific connotation of the ETR theory and explore its characteristics by discussing the practical application cases.
基金the National Natural Science Foundation of China(No.11672238)the 111 Project(No.BP0719007)the Shaanxi Province Natural Science Foundation(No.2020JZ-06)for the financial support.
文摘A modified inner-element edge-based smoothed finite element method(IES-FEM)is developed and integrated with ABAQUS using a user-defined element(UEL)in this study.Initially,the smoothing domain discretization of IES-FEM is described and compared with ES-FEM.A practical modification of IES-FEM is then introduced that used the technique employed by ES-FEM for the nodal strain calculation.The differences in the strain computation among ES-FEM,IES-FEM,and FEM are then discussed.The modified IES-FEM exhibited superior performance in displacement and a slight advantage in stress compared to FEM using the same mesh according to the results obtained from both the regular and irregular elements.The robustness of the IES-FEM to severely deformed meshes was also verified.
文摘Under the starry night,a fashion extravaganza was staged in Lhasa.The Fashion Night is a local fashion show in Xizang combining tradition and innovation as well as modernity and international flavor.By providing them with opportunities to present their art works to more audiences,it built a platform for young Tibetan designers for their careers to take root and blossom on the plateau.It is also aimed to bring more people to pay attention to the fashion culture of Xizang,and infuse new vitality into the development of local fashion industry.
文摘The data production elements are driving profound transformations in the real economy across production objects,methods,and tools,generating significant economic effects such as industrial structure upgrading.This paper aims to reveal the impact mechanism of the data elements on the“three transformations”(high-end,intelligent,and green)in the manufacturing sector,theoretically elucidating the intrinsic mechanisms by which the data elements influence these transformations.The study finds that the data elements significantly enhance the high-end,intelligent,and green levels of China's manufacturing industry.In terms of the pathways of impact,the data elements primarily influence the development of high-tech industries and overall green technological innovation,thereby affecting the high-end,intelligent,and green transformation of the industry.
基金supported by The National Science and Technology Major Project under contract(No.2011ZX05025-002-03)The Project of China National Offshore Oil Corporation(CNOOC)Limited under contract(No.CCL2013ZJFNO729)The National Natural Science Foundation of China under contract(No.41530963)。
文摘In this paper,core samples from the Well LS33 in the deep-water area of the Qiongdongnan Basin(QDNB)in the South China Sea were selected and analyzed by group(authigenic carbonate and terrigenous detritus)to obtain the contents of rare earth elements(REE)to explore the degree of preservation of paleo-seawater information by carbonate components and elucidate the provenance relationship between the QDNB and the Yinggehai Basin and the provenance changes in the deep-water area of the QDNB since the Oligocene.The main achievements of this paper are as follows:(1)In the process of extracting the autogenic carbonate,the iron-manganese oxide envelope on the surface of the sediment particles(which can adsorb REE or its complexes in seawater)will partially dissolve into the autogenic carbonate components,thus covering the REE geochem-ical information of paleo-seawater carried by the auto-genic carbonate.Therefore,caution should be exercised when using the geochemical characteristics of REE in the carbonate component of impure carbonate rocks to reflect the sedimentary paleoenvironment.(2)The analysis of the REE geochemical characteristics of multiple cores in the Ying-gehai-QDNB shows that there is a close provenance rela-tionship between the two Basins.The sediments in the central depression area of the Yinggehai Basin and the deep-water area in the western part of the QDNB generally contain more feldspar(Eu-rich)minerals.Since the Eocene,paleo-rivers have carried ultramafic-mafic materials originating from the western South China Sea into the sea.Affected by the transport distance and sea level changes,the content of feldspar(Eu-rich)minerals in the sediments of the QDNB from west to east gradually decreased.
基金Project supported by the Science and Engineering Research Board of India(SRG/2020/002096)。
文摘Rare earth elements(REEs)play a crucial role in many technologies from daily appliances in cell phones to more advanced wind turbines and electric cars.Permanent magnets account for a quarter of total global REEs production and have high recycling value.In this study,smelting process was used to selectively oxidize REEs in the permanent magnets by adding Fe_(2)O_(3).This separates REEs into a slag phase from an iron-rich metallic phase.B_(2)O_(3) was also added to the system as a flux to lower the slag melting temperature.This minimizes REEs loss to the metallic phase and allows a more efficient phase separation.The effect of flux and oxidizing agent addition was investigated on both regular and cerium-rich NdFeB(NdCeFeB)magnets.At 1350℃and for 1 h,the slag phase was successfully separated from the metallic phase with the addition of 0.8 stoichiometric amount of Fe_(2)O_(3) and 40 wt%of B_(2)O_(3).Scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDX)analysis reveals that REEs in the magnet do not migrate to the metal phase while the REE-rich slag phase contains almost no iron.After the selective removal of iron into the metallic phase,REEs are recovered from the slag phase through an acid leaching process allowing>99%of REEs recovery.Boron in the magnet can also be recovered as useful boric acid by evaporation and crystallisation technique.The proposed process in this study is reagent and energy-efficient with almost complete valorisation of both NdCeFeB and NdFeB magnets.
基金the National Natural Science Foundation of China(No.U24A2035&52225101)Guangdong Major Project of Basic and Applied Basic Research(No.2020B0301030006).
文摘The effect of alloying elements on the properties of magnesium(Mg)matrix composites is significant.The distribution of alloy elements between the matrix and the reinforcements plays a pivotal role in the element selection and compositional design of Mg-based metal matrix composite.This work used thermodynamics to study the equilibrium distribution coefficients of the 40 elements X(Be,Ca,Zn,Sn,REs,etc.)in the Mg-Ti and Mg-Zr systems at 573 K,773 K and 973 K.In addition,the binary solution enthalpies were evaluated using the Miedema model to predict the bonding tendency of the element X with Mg,Ti and Zr.These research outputs provide valuable data and theoretical reference for Mg-alloy design and optimization.
