Elastic electronics are increasingly prevalent in information storage,smart sensing and health monitoring due to their softness,stretchability and portability.Wearable electronic devices should possess elasticity and ...Elastic electronics are increasingly prevalent in information storage,smart sensing and health monitoring due to their softness,stretchability and portability.Wearable electronic devices should possess elasticity and stretchability that align with biological tissues.Specifically,their materials should be capable of elastic strain up to 50–80%,while the devices themselves must maintain electric stability under strains that accommodate body movements[1].展开更多
As the most abundant aromatic bio-based polymer,lignin has great potential as a sustainable feedstock for building crosslinked thermoset polymers as bio-based adhesives.However,the potential of hardwood kraft lignin(H...As the most abundant aromatic bio-based polymer,lignin has great potential as a sustainable feedstock for building crosslinked thermoset polymers as bio-based adhesives.However,the potential of hardwood kraft lignin(HKL)is limited due to its poor crosslinking reactivity.Hence,for the first time,the present study reports the facile oxidation of HKL involving a redox reaction with silver-ammonia complexes([(AgNH3)2]+),primarily focusing on oxidation to produce reactive quinones and promote C-C linkages during reaction.This study aims to increases reactivity of oxidized HKL for effective crosslinking with monoethanolamine(MEA)for the development of bio-based wood adhesives.The characterization,including 13C-nuclear magnetic resonance(NMR)and Fourier transform infrared(FT-IR)spectroscopy,confirms the oxidation reaction,such as the formation of quinones(C=O)and subsequent crosslinking between the oxidized HKL molecules and MEA.Additionally,gel permeation chromatography(GPC)confirms the C-C and C-O linkages with increased molecular weight after oxidation,and is supported by differential scanning calorimetry(DSC)which shows the exothermic reaction due to the crosslinking of the oxidized HKL molecules via condensation to form C-C and C-O linkages.The crosslinked HKL/MEA-based adhesives underwent mild reaction and achieved a maximum dry shear strength of 0.77 MPa,which exceeds the standard requirement of 0.6 MPa.These findings demonstrate not only a one-pot oxidation for improving the reactivity of HKL using silver complexes,but also its facile crosslinking with MEA for sustainable bio-based wood adhesives.展开更多
Severe volume changes and poor electrochemical performance are key barriers to the practical use of silicon anodes.In this study,a self-healing,multifunctional supramolecular binder system was introduced,which combine...Severe volume changes and poor electrochemical performance are key barriers to the practical use of silicon anodes.In this study,a self-healing,multifunctional supramolecular binder system was introduced,which combines polymers,ionic liquids,and halometals to achieve dynamic cross linking during volume changes.The addition of specific halometals can adjust the Li+solvation structure and energy,promoting the formation of a stable solid electrolyte interface(SEI)rich in LiF and facilitating Li+desolvation.After 200 cycles,the Si@BF binder(with both ionic liquid and halometal)showed no cracks,indicating excellent structural stability.Additionally,Si||LiFePO_(4)(LFP)full-cell tests at 5 C rate reveal drastic differences:The unmodified binder(the pristine Si)exhibits nearly 0%capacity retention after 400 cycles,the ionic liquid-modified system(Si@B)maintains 11.58%,while Si@BF achieves a remarkable 90.92%retention.Notably,Si@BF retains 78.72%capacity even after 800 cycles.This study offers new insights into dynamic cross-linking systems and solvation-structure regulation,providing references for developing advanced lithium-ion batteries with better performance.展开更多
Reader proteins that bind specific methyllysine are important to biological functions of lysine methylation,but readers of many methyllysine sites are still unknown.Therefore,development of covalent probes is importan...Reader proteins that bind specific methyllysine are important to biological functions of lysine methylation,but readers of many methyllysine sites are still unknown.Therefore,development of covalent probes is important to identify readers from cell samples so as to understand biological roles of lysine methylation.Generally,readers bind methyllysine via aromatic cages that contain tryptophan,tyrosine and phenylalanine,that offer a unique motif for selective crosslinking.We recently reported a site-selective tryptophan crosslinking strategy based on dimethylsulfonium that mimics dimethyllysine to crosslink tryptophan in aromatic cages of readers.Since tyrosine is a key residue for binding affinity to methyllysine,especially some readers that do not contain tryptophan residues in the binding pocket.Here we developed strategies of site-selective crosslinking to tyrosine.Ultraviolet(UV)source was applied to excite tyrosine at neutral pH or phenoxide at basic p H,and subsequent single-electron transfer(SET)from Tyr*to sulfonium inside the binding pocket enables selective crosslinking.In consequence,methyllysine readers with tyrosine-containing aromatic cages could be selectively crosslinked by site-specific sulfonium peptide probes.In addition,we expanded substrates from aromatic cages to tyrosine residues of proximate contact with sulfonium probes.The pair of LgBiT and SmBiT exhibited orthogonal crosslinking in complicated cell samples.As a result,we may expand sulfonium tools to target local tyrosine in future investigations.展开更多
Inorganic CsPbI_(3)perovskite with superior thermal stability and photoelectric properties has developed into a promising candidate for photovoltaic applications.Nevertheless,the power conversion efficiency(PCE)of CsP...Inorganic CsPbI_(3)perovskite with superior thermal stability and photoelectric properties has developed into a promising candidate for photovoltaic applications.Nevertheless,the power conversion efficiency(PCE)of CsPbI_(3)perovskite solar cells(PSCs)still lags far behind that of both organic-inorganic hybrid counterparts and the theoretical PCE limit,primarily restricted by severe fill factor(FF)and opencircuit voltage(VOC)deficits.Herein,an in-situ self-crosslinking strategy is proposed to construct high-performance inverted inorganic PSCs by incorporating acrylate monomers as additives into CsPbI_(3)perovskite precursors.During the thermal annealing process of perovskite films,acrylate monomers can form network structures by breaking the C=C groups through an in-situ polymerization reaction,mainly anchored at the grain boundaries(GBs)and on the surfaces of perovskite.Meanwhile,the C=O groups of acrylate polymers can favorably coordinate with uncoordinated Pb^(2+),thereby decreasing defect density and stabilizing the perovskite phase.Particularly,with multiple crosslinking and passivation sites,the incorporation of dipentaerythritol pentaacrylate(DPHA)can effectively improve the perovskite film quality,suppress nonradiative recombination,and block moisture erosion.Consequently,the DPHAbased PSC achieves a champion PCE of 20.05%with a record-high FF of 85.05%,both of which rank among the top in the performance of inverted CsPbI_(3)PSCs.Moreover,the unencapsulated DPHA-based device exhibits negligible hysteresis,remarkably improved long-term storage,and operational stability.This work offers a facile and useful strategy to simultaneously promote the efficiency and device stability of inverted inorganic PSCs.展开更多
Hydrogels are widely used in reservoir flow control to enhanced oil recovery.However,challenges such as environmental contamination from conventional crosslinkers,poor solubility of crosslinking agents,and short gelat...Hydrogels are widely used in reservoir flow control to enhanced oil recovery.However,challenges such as environmental contamination from conventional crosslinkers,poor solubility of crosslinking agents,and short gelation times under high-temperature conditions(e.g.,150℃)have hindered their practical application.Herein,we present the synthesis of amine-functionalized carbon quantum dots(NH_(2)-CQDs),which act as both a nano-crosslinker and a nano-reinforcing agent within hydrogel systems.The NH_(2)-CQDs-incorporated hydrogel can remain stability for 300 days under the conditions of a mineralization degree of 2.11×10^(4)mg/mL and 170℃,and has high tensile strength(371 kPa),good toughness(49.6 kJ/m~3),excellent viscoelasticity(G'=960 Pa,G"=460 Pa)and shear resistance.In addition,NH_(2)-CQDs adds many hydroxyl groups to the hydrogel,which can be attached to the surface of various substances.At the same time,micro-nano capsules containing NH_(2)-CQDs were formed by self-assembly of hydrophobic SiO_(2)on water droplets,the NH_(2)-CQDs solution is encapsulated in a capsule,and when stimulated by external conditions(temperature,pH,surfactant),the capsule releases the NH_(2)-CQDs solution,this method greatly delays the crosslinking time between polymer and crosslinker at high temperature.Under the condition of 170℃and pH=7,the gelation time of 10%hydrophobic SiO_(2)coated hydrogel is 44 times that of uncoated hydrogel,which can be effectively used for deep formation flow control,and CQD give hydrogels fluorescence properties that can be used for underground signal tracking.展开更多
All-safe liquid-state lithium-ion batteries(ASLS-LIBs) is of great interest as they can potentially combine the safety of all-solid-state batteries with the high performance and low manufacturing cost of traditional l...All-safe liquid-state lithium-ion batteries(ASLS-LIBs) is of great interest as they can potentially combine the safety of all-solid-state batteries with the high performance and low manufacturing cost of traditional liquid-state LIBs. However, the practical success of ASLS-LIBs is bottlenecked by the lack of advanced separator technology that can simultaneously realize high performances in puncturing-tolerability,fire-resistance, and importantly, wetting-capability with non-flammable liquid-electrolytes. Here, we propose a concept of inorganic in-situ separator(IISS) by hybrid-sol physical crosslinking directly onto the electrode surface to address the above challenges. Particularly, the hybrid-sol is designed with silica nanoparticles as the building block and poly(vinylidene difluoride) nanoparticles as the crosslinking agent. The critical factors for controlling the IISS microstructures and properties have been systematically investigated. The advantages of the IISS have been confirmed by its fast wetting with various fireresistant liquid-electrolytes, customizable thickness and porous structures, robust interface with planar or three-dimensional(3D)-structured electrodes, and importantly, unexpected self-adaptability against puncturing. Enabled by the above merits, a fire-resistant ASLS-LIB is successfully assembled and demonstrated with stable electrochemical performance. This sol-crosslinked IISS may open an avenue for the studies on the next-generation separator technology, cell assembling, solid electrolyte processing as well as non-flammable secondary batteries.展开更多
Poly(vinyl alcohol)(PVA)hydrogels have garnered significant attention for tissue engineering,wound dressing,and electronic skin sensing applications.However,their poor mechanical performance severely restricts their m...Poly(vinyl alcohol)(PVA)hydrogels have garnered significant attention for tissue engineering,wound dressing,and electronic skin sensing applications.However,their poor mechanical performance severely restricts their multifunctional application in many scenarios.To address this limitation,PVA/tannic acid(TA)@carbon nanotubes(PVA/TA@CNTs)composite hydrogels with triple crosslinking networks were prepared through freezing-thawing and the solvent-induced shrinkage method,utilizing tannic acid-carbon nanotubes(TA@CNTs)as reinforcing units and a Ca^(2+)crosslinking strategy.The enhanced interfacial networks consisting of PVA crystalline domains,hydrogen bonding,and metal coordination endowed the composite hydrogel with a high mechanical strength,excellent flexibility,and fracture toughness,accompanied by a significant increase in crystallinity.The tensile strength and fracture toughness of the composite hydrogel reached up to about 7.0 MPa and 17.0MJ/m^(3),which were roughly 8 and 10 times higher than those of neat PVA hydrogel,respectively.The composite hydrogel demonstrated good cytocompatibility,significantly addressing the challenge of balancing structural reinforcement with biosafety in hydrogels.This methodology establishes a rational design for fabricating mechanically robust yet tough PVA hydrogels for biomedical applications.展开更多
AIM:To assess the visual outcomes and corneal biomechanical properties of myopia patients between laser in situ keratomileusis(LASIK)and LASIK combined with accelerated corneal crosslinking(LASIK Xtra).METHODS:This pr...AIM:To assess the visual outcomes and corneal biomechanical properties of myopia patients between laser in situ keratomileusis(LASIK)and LASIK combined with accelerated corneal crosslinking(LASIK Xtra).METHODS:This prospective study analyzed 52 consecutive myopia patients treated with LASIK Xtra and 45 consecutive myopia patients treated with LASIK.Only the right eyes in the two groups were analyzed.The uncorrected distance visual acuity(UDVA),keratometry values,postoperative central corneal thickness(CCT),corneal demarcation line depth,the corneal compensated intraocular pressure(IOPcc),Goldmann-correlated IOP(IOPg),corneal resistance factor(CRF)and corneal hysteresis(CH)from Ocular Response Analyzer(ORA)were analyzed.Further,the correlation between the demarcation line depth and ORA-related biomechanical parameters were analyzed.RESULTS:No significant differences in UDVA,postoperative CCT,or mean K values were found between the 2 groups at 1 to 12mo postoperative follow-up(all P>0.05).The changes of CRF was significantly lower in the LASIK Xtra group compared to the LASIK group(all P<0.05)at all the postoperative visits.The changes of CH were significantly higher in the LASIK Xtra group(all P<0.05).No significant differences were discovered regarding the changes of IOPcc and IOPg posperatively(all P>0.05).Out of 52 cases in the LASIK Xtra group,the demarcation line was present in 40 eyes(77%).The average depth of the demarcation was 220.73±42.70μm(136 to 288μm).No significant correlation was observed between the depth of the demarcation line and any of the ORA-related biomechanical parameters such as IOPcc,IOPg,CRF and CH at 12mo(all P>0.05).CONCLUSION:Both procedures demonstrate comparable outcomes in terms of visual acuity,refraction and ablation predictability.This study confirms that corneal biomechanical properties of the included patients weakened after both procedures,but the cornea after LASIK Xtra are stiffer than conventional LASIK.展开更多
With the growth of global protein demand and the development of plant-based foods,pea protein,as a low-allergenic,nutritionally balanced and environmentally friendly plant protein,has shown great potential in replacin...With the growth of global protein demand and the development of plant-based foods,pea protein,as a low-allergenic,nutritionally balanced and environmentally friendly plant protein,has shown great potential in replacing animal protein.Pea protein is mainly composed of globulin and albumin,with a protein content of 20%to 30%,and has a balanced amino acid composition,as well as being rich in minerals and dietary fiber.It also possesses good foaming,gelling,emulsifying and antioxidant functional properties.However,pea protein also has inherent defects that limit its application in the food industry.This article systematically reviews the extraction techniques,functional properties,modification methods and application fields of pea protein,and focuses on evaluating the effects of different extraction and modification strategies on protein yield and functional properties.Research shows that ultrasonic-assisted alkaline extraction can reduce solvent usage by 55%,shorten extraction time by 50%,and increase extraction rate by 12.51%;under optimized conditions,ultrafiltration membrane technology can achieve a protein purity of 91%.In terms of modification,ultrasonic treatment increases foaming capacity by 37.4%,and phenolic cross-linking increases gel strength from 3.0 kPa to 48 kPa.This article provides data support and theoretical reference for the efficient extraction and functional optimization of pea protein,and has promoting significance for its wide application in plant-based foods.展开更多
In order to improve the substrate diffusion properties and stability of an immobilized enzyme alginate microgels modified with TiO2 nanoparticles were employed as the enzyme immobilizing support.Ionotropic gelation wa...In order to improve the substrate diffusion properties and stability of an immobilized enzyme alginate microgels modified with TiO2 nanoparticles were employed as the enzyme immobilizing support.Ionotropic gelation was applied for the preparation of hybrid gels while Ca2＋ Ce3＋ Ni2＋Cu2＋and Fe3＋were employed as the crosslinkers.Papain was selected as the model enzyme. UV-Vis spectroscopy was employed to investigate the activity of papain to evaluate kinetics and stability.Analysis results show that the highest affinity the lowest Michaelis-Menten constant Km =11.0 mg/mL and the highest stability are obtained when using Cu2＋as the crosslinker.The effect of the mass ratio of TiO2 to papain on the stability and leakage of papain is also investigated and the results show that 10∶1 TiO2∶papain is optimal because the proper use of TiO2 can reduce enzyme leakage and ensure enzyme stability.Preparing Cu/alginate/TiO2 hybrid gels via ionotropic gelation can provide a satisfactory diffusion capability and enzyme stability.展开更多
Ultra High Molecular Weight Polyethylene(UHMWPE)has been widely used as a bearing material for artificial joint replacement over forty years.It is usually crosslinked by gamma rays irradiation before its implantation ...Ultra High Molecular Weight Polyethylene(UHMWPE)has been widely used as a bearing material for artificial joint replacement over forty years.It is usually crosslinked by gamma rays irradiation before its implantation into human body.In this study,UHMWPE and UHMWPE/nano-hydroxyapatite(n-HA)composite were prepared by vacuum hot-pressing method.The prepared materials were irradiated by gamma rays in vacuum and molten heat treated in vacuum just after irradiation.The effect of filling n-HA with gamma irradiation on tribological properties of UHMWPE was investigated by using friction and wear experimental machine(model MM-200)under deionized water lubrication.Micro-morphology of worn surface was observed by metallographic microscope.Contact angle and hardness of the materials were also measured.The results show that contact angle and hardness are changed by filling n-HA and gamma irradiation.Friction coefficient and wear rate under deionized water lubrication are reduced by filling n-HA.While friction coefficient is increased and wear rate is reduced significantly by gamma irradiation.The worn surface of unfilled material is mainly characterized as adhesive wear and abrasive wear,and that of n-HA filled material is mainly characterized as abrasive wear.After gamma irradiation,the degrees of adhesive and abrasive wear for unfilled material and abrasive wear of n-HA filled material are significantly reduced.Unfilled and filled materials after irradiation are mainly shown as slight fatigue wear.The results indicate that UHMWPE and UHMWPE/n-HA irradiated at the dose of 150 kGy can be used as bearing materials in artificial joints for its excellent wear resistance compared to original UHMWPE.展开更多
Crosslinking reactions of high density polyethylene with low peroxide concentrations ranging from 0.1 wt% to 1.0 wt% at temperatures of 170, 180 and 190 ℃ were monitored by rheological measurements. A critical gel fo...Crosslinking reactions of high density polyethylene with low peroxide concentrations ranging from 0.1 wt% to 1.0 wt% at temperatures of 170, 180 and 190 ℃ were monitored by rheological measurements. A critical gel forms at the peroxide concentration of 0.2 wt%, where the transition from long chain branching generation to crosslinking network formation could occur. Rheokinetics of crosslinking can be fitted well by Ding-Leonov＇s model. The curing rate k2 at the earlier stage exhibits about 3 times acceleration per 10 ~C with increasing temperature, while the equilibrium modulus G＇ at the fully cured stage is almost independent of temperature. Influences of crosslinking on the subsequent crystallization behaviors were detected by DSC measurements. Above the critical gel concentration, crystallization is largely retarded as evidenced by the lower crystallization temperature Tc and crystallinity Xc due to the network formation. The secondary crystallization valley located at the temperature near 80 ℃ can be observed above the critical concentration, which becomes more evident with the increasing peroxide concentration and curing temperature. This phenomenon provides another evidence of crystallization retardation by the crosslinking network.展开更多
Objective： Procyanidins （PC） are widely available natural polyphenols. The present study is designed to investigate if PC can inhibit angiogenesis in lung adenocarcinoma xenografts through crosslinking vascular ext...Objective： Procyanidins （PC） are widely available natural polyphenols. The present study is designed to investigate if PC can inhibit angiogenesis in lung adenocarcinoma xenografts through crosslinking vascular extracellular matrix （ECM） and preventing proteolysis by matrix metalloproteinases （MMPs）. Methods： Using the in vitro MMP-2 proteolysis and in vivo subcutaneous implantation models, we investigated if PC crosslinking inhibits MMP-mediated proteolysis. Using a cultured cell detachment assay, an in vitro angiogenesis assay, and a cell proliferation assay, we investigated if PC inhibits MMP-2-mediated endothelial cell detachment, angiogenesis, and cell proliferation, respectively. Using tumor xenografts, we evaluated if PC can inhibit growth of lung adenocarcinoma. Results： PC crosslink vascular ECM proteins, protecting them against proteolysis by MMPs in vitro and in vivo, protecting cultured human umbilical vein endothelial cells from detachment by MMP-2, and inhibiting in vitro angiogenesis. However, PC （0.75-100 μg/mL） did not inhibit vascular and tumor cells proliferation. PC injections （30 mg PC/kg bodyweight） in situ had anticancer effects on xenografts of lung adenocarcinoma, most likely by inhibiting angiogenesis during ECM proteolysis by MMPs. Conclusion： The results suggest that PC may be important MMP inhibitors that can be used as therapeutic anticancer agents.展开更多
AIM: To evaluate the efficacy and safety of corneal collagen crosslinking (01) to prevent the progression of post-laser in situ keratomileusis (LASIK) corneal ectasia. METHODS: In a prospective, nonrandomized, single-...AIM: To evaluate the efficacy and safety of corneal collagen crosslinking (01) to prevent the progression of post-laser in situ keratomileusis (LASIK) corneal ectasia. METHODS: In a prospective, nonrandomized, single-centre study, CXL was performed in 20 eyes of 11 patients who had LASIK for myopic astigmatism and subsequently developed keratectasia. The procedure included instillation of 0.1% riboflavin-20% dextrane solution 30 minutes before UVA irradiation and every 5 minutes for an additional 30 minutes during irradiation. The eyes were evaluated preoperatively and at 1-, 3-, 6-, and 12-month intervals. The complete ophthalmologic examination comprised uncorrected visual acuity, best spectacle-corrected visual acuity, endothelial cell count, ultrasound pachymetry, corneal topography, and in vivo confocal microscopy. RESULTS: CXL appeared to stabilise or partially reverse the progression of post-LASIK corneal ectasia without apparent complication in our cohort. UCVA and BCVA improvements were statistically significant (P<0.05)beyond 12 months after surgery (improvement of 0.07 and 0.13 logMAR at 1 year, respectively). Mean baseline flattest meridian keratometry and mean steepest meridian keratometry reduction (improvement of 2.00 and 1.50 diopters (D), respectively) were statistically significant (P < 0.05) at 12 months postoperatively. At 1 year after 01, mean endothelial cell count did not deteriorate. Mean thinnest cornea pachymetry increased significantly. CONCLUSION: The results of the study showed a long-term stability of post-LASIK corneal ectasia after crosslinking without relevant side effects. It seems to be a safe and promising procedure to stop the progression of post-LASIK keratectasia, thereby avoiding or delaying keratoplasty.展开更多
基金supported by generous grants from the Natural Science Foundation of Zhejiang Province(LR24E030003)Zhejiang Province Qianjiang Talent Program(ZJ-QJRC-2020-32).
文摘Elastic electronics are increasingly prevalent in information storage,smart sensing and health monitoring due to their softness,stretchability and portability.Wearable electronic devices should possess elasticity and stretchability that align with biological tissues.Specifically,their materials should be capable of elastic strain up to 50–80%,while the devices themselves must maintain electric stability under strains that accommodate body movements[1].
基金supported by the National Research Foundation(NRF)of Korea,funded by the Korean Government(MSIT)(Grant No.RS-2023-00240043).
文摘As the most abundant aromatic bio-based polymer,lignin has great potential as a sustainable feedstock for building crosslinked thermoset polymers as bio-based adhesives.However,the potential of hardwood kraft lignin(HKL)is limited due to its poor crosslinking reactivity.Hence,for the first time,the present study reports the facile oxidation of HKL involving a redox reaction with silver-ammonia complexes([(AgNH3)2]+),primarily focusing on oxidation to produce reactive quinones and promote C-C linkages during reaction.This study aims to increases reactivity of oxidized HKL for effective crosslinking with monoethanolamine(MEA)for the development of bio-based wood adhesives.The characterization,including 13C-nuclear magnetic resonance(NMR)and Fourier transform infrared(FT-IR)spectroscopy,confirms the oxidation reaction,such as the formation of quinones(C=O)and subsequent crosslinking between the oxidized HKL molecules and MEA.Additionally,gel permeation chromatography(GPC)confirms the C-C and C-O linkages with increased molecular weight after oxidation,and is supported by differential scanning calorimetry(DSC)which shows the exothermic reaction due to the crosslinking of the oxidized HKL molecules via condensation to form C-C and C-O linkages.The crosslinked HKL/MEA-based adhesives underwent mild reaction and achieved a maximum dry shear strength of 0.77 MPa,which exceeds the standard requirement of 0.6 MPa.These findings demonstrate not only a one-pot oxidation for improving the reactivity of HKL using silver complexes,but also its facile crosslinking with MEA for sustainable bio-based wood adhesives.
基金support from the Open Fund of Jiangsu Key Laboratory of Electrochemical Energy Storage Technologies(No.EEST2019-1).
文摘Severe volume changes and poor electrochemical performance are key barriers to the practical use of silicon anodes.In this study,a self-healing,multifunctional supramolecular binder system was introduced,which combines polymers,ionic liquids,and halometals to achieve dynamic cross linking during volume changes.The addition of specific halometals can adjust the Li+solvation structure and energy,promoting the formation of a stable solid electrolyte interface(SEI)rich in LiF and facilitating Li+desolvation.After 200 cycles,the Si@BF binder(with both ionic liquid and halometal)showed no cracks,indicating excellent structural stability.Additionally,Si||LiFePO_(4)(LFP)full-cell tests at 5 C rate reveal drastic differences:The unmodified binder(the pristine Si)exhibits nearly 0%capacity retention after 400 cycles,the ionic liquid-modified system(Si@B)maintains 11.58%,while Si@BF achieves a remarkable 90.92%retention.Notably,Si@BF retains 78.72%capacity even after 800 cycles.This study offers new insights into dynamic cross-linking systems and solvation-structure regulation,providing references for developing advanced lithium-ion batteries with better performance.
基金the support from National Natural Science Foundation of China(No.22161132006)Key R&D Program of Zhejiang(No.2024SSYS0036)Westlake University Startup。
文摘Reader proteins that bind specific methyllysine are important to biological functions of lysine methylation,but readers of many methyllysine sites are still unknown.Therefore,development of covalent probes is important to identify readers from cell samples so as to understand biological roles of lysine methylation.Generally,readers bind methyllysine via aromatic cages that contain tryptophan,tyrosine and phenylalanine,that offer a unique motif for selective crosslinking.We recently reported a site-selective tryptophan crosslinking strategy based on dimethylsulfonium that mimics dimethyllysine to crosslink tryptophan in aromatic cages of readers.Since tyrosine is a key residue for binding affinity to methyllysine,especially some readers that do not contain tryptophan residues in the binding pocket.Here we developed strategies of site-selective crosslinking to tyrosine.Ultraviolet(UV)source was applied to excite tyrosine at neutral pH or phenoxide at basic p H,and subsequent single-electron transfer(SET)from Tyr*to sulfonium inside the binding pocket enables selective crosslinking.In consequence,methyllysine readers with tyrosine-containing aromatic cages could be selectively crosslinked by site-specific sulfonium peptide probes.In addition,we expanded substrates from aromatic cages to tyrosine residues of proximate contact with sulfonium probes.The pair of LgBiT and SmBiT exhibited orthogonal crosslinking in complicated cell samples.As a result,we may expand sulfonium tools to target local tyrosine in future investigations.
基金supported by the Program for Science and Technology Innovation Team in Zhejiang(Grant No.2021R01004)the Natural Science Foundation of Ningbo City(No.2023J119)+1 种基金the Ningbo Youth Science and Technology Innovation Leading Talent Project(2023QL029)K.C.Wong Magna Fund in Ningbo University,China。
文摘Inorganic CsPbI_(3)perovskite with superior thermal stability and photoelectric properties has developed into a promising candidate for photovoltaic applications.Nevertheless,the power conversion efficiency(PCE)of CsPbI_(3)perovskite solar cells(PSCs)still lags far behind that of both organic-inorganic hybrid counterparts and the theoretical PCE limit,primarily restricted by severe fill factor(FF)and opencircuit voltage(VOC)deficits.Herein,an in-situ self-crosslinking strategy is proposed to construct high-performance inverted inorganic PSCs by incorporating acrylate monomers as additives into CsPbI_(3)perovskite precursors.During the thermal annealing process of perovskite films,acrylate monomers can form network structures by breaking the C=C groups through an in-situ polymerization reaction,mainly anchored at the grain boundaries(GBs)and on the surfaces of perovskite.Meanwhile,the C=O groups of acrylate polymers can favorably coordinate with uncoordinated Pb^(2+),thereby decreasing defect density and stabilizing the perovskite phase.Particularly,with multiple crosslinking and passivation sites,the incorporation of dipentaerythritol pentaacrylate(DPHA)can effectively improve the perovskite film quality,suppress nonradiative recombination,and block moisture erosion.Consequently,the DPHAbased PSC achieves a champion PCE of 20.05%with a record-high FF of 85.05%,both of which rank among the top in the performance of inverted CsPbI_(3)PSCs.Moreover,the unencapsulated DPHA-based device exhibits negligible hysteresis,remarkably improved long-term storage,and operational stability.This work offers a facile and useful strategy to simultaneously promote the efficiency and device stability of inverted inorganic PSCs.
基金support and funding from the National Natural Science Foundation of China(No.52174047)。
文摘Hydrogels are widely used in reservoir flow control to enhanced oil recovery.However,challenges such as environmental contamination from conventional crosslinkers,poor solubility of crosslinking agents,and short gelation times under high-temperature conditions(e.g.,150℃)have hindered their practical application.Herein,we present the synthesis of amine-functionalized carbon quantum dots(NH_(2)-CQDs),which act as both a nano-crosslinker and a nano-reinforcing agent within hydrogel systems.The NH_(2)-CQDs-incorporated hydrogel can remain stability for 300 days under the conditions of a mineralization degree of 2.11×10^(4)mg/mL and 170℃,and has high tensile strength(371 kPa),good toughness(49.6 kJ/m~3),excellent viscoelasticity(G'=960 Pa,G"=460 Pa)and shear resistance.In addition,NH_(2)-CQDs adds many hydroxyl groups to the hydrogel,which can be attached to the surface of various substances.At the same time,micro-nano capsules containing NH_(2)-CQDs were formed by self-assembly of hydrophobic SiO_(2)on water droplets,the NH_(2)-CQDs solution is encapsulated in a capsule,and when stimulated by external conditions(temperature,pH,surfactant),the capsule releases the NH_(2)-CQDs solution,this method greatly delays the crosslinking time between polymer and crosslinker at high temperature.Under the condition of 170℃and pH=7,the gelation time of 10%hydrophobic SiO_(2)coated hydrogel is 44 times that of uncoated hydrogel,which can be effectively used for deep formation flow control,and CQD give hydrogels fluorescence properties that can be used for underground signal tracking.
基金National Natural Science Foundation of China (52203123)Sichuan Science and Technology Program (2023NSFSC0991)+2 种基金State Key Laboratory of Polymer Materials Engineering (sklpme-2023-1-05 and sklpme-2024-2-04)Fundamental Research Funds for the Central UniversitiesThis research was also partially sponsored by the Double First-Class Construction Funds of Sichuan University。
文摘All-safe liquid-state lithium-ion batteries(ASLS-LIBs) is of great interest as they can potentially combine the safety of all-solid-state batteries with the high performance and low manufacturing cost of traditional liquid-state LIBs. However, the practical success of ASLS-LIBs is bottlenecked by the lack of advanced separator technology that can simultaneously realize high performances in puncturing-tolerability,fire-resistance, and importantly, wetting-capability with non-flammable liquid-electrolytes. Here, we propose a concept of inorganic in-situ separator(IISS) by hybrid-sol physical crosslinking directly onto the electrode surface to address the above challenges. Particularly, the hybrid-sol is designed with silica nanoparticles as the building block and poly(vinylidene difluoride) nanoparticles as the crosslinking agent. The critical factors for controlling the IISS microstructures and properties have been systematically investigated. The advantages of the IISS have been confirmed by its fast wetting with various fireresistant liquid-electrolytes, customizable thickness and porous structures, robust interface with planar or three-dimensional(3D)-structured electrodes, and importantly, unexpected self-adaptability against puncturing. Enabled by the above merits, a fire-resistant ASLS-LIB is successfully assembled and demonstrated with stable electrochemical performance. This sol-crosslinked IISS may open an avenue for the studies on the next-generation separator technology, cell assembling, solid electrolyte processing as well as non-flammable secondary batteries.
基金financially supported by the China Postdoctoral Science Foundation(No.2024M751205)the Natural Science Foundation of Jiangsu Province(JSNSF)(No.BK20230694)。
文摘Poly(vinyl alcohol)(PVA)hydrogels have garnered significant attention for tissue engineering,wound dressing,and electronic skin sensing applications.However,their poor mechanical performance severely restricts their multifunctional application in many scenarios.To address this limitation,PVA/tannic acid(TA)@carbon nanotubes(PVA/TA@CNTs)composite hydrogels with triple crosslinking networks were prepared through freezing-thawing and the solvent-induced shrinkage method,utilizing tannic acid-carbon nanotubes(TA@CNTs)as reinforcing units and a Ca^(2+)crosslinking strategy.The enhanced interfacial networks consisting of PVA crystalline domains,hydrogen bonding,and metal coordination endowed the composite hydrogel with a high mechanical strength,excellent flexibility,and fracture toughness,accompanied by a significant increase in crystallinity.The tensile strength and fracture toughness of the composite hydrogel reached up to about 7.0 MPa and 17.0MJ/m^(3),which were roughly 8 and 10 times higher than those of neat PVA hydrogel,respectively.The composite hydrogel demonstrated good cytocompatibility,significantly addressing the challenge of balancing structural reinforcement with biosafety in hydrogels.This methodology establishes a rational design for fabricating mechanically robust yet tough PVA hydrogels for biomedical applications.
基金Supported by Wu Jieping Medical Foundation(No.320.6750.2021-04-15).
文摘AIM:To assess the visual outcomes and corneal biomechanical properties of myopia patients between laser in situ keratomileusis(LASIK)and LASIK combined with accelerated corneal crosslinking(LASIK Xtra).METHODS:This prospective study analyzed 52 consecutive myopia patients treated with LASIK Xtra and 45 consecutive myopia patients treated with LASIK.Only the right eyes in the two groups were analyzed.The uncorrected distance visual acuity(UDVA),keratometry values,postoperative central corneal thickness(CCT),corneal demarcation line depth,the corneal compensated intraocular pressure(IOPcc),Goldmann-correlated IOP(IOPg),corneal resistance factor(CRF)and corneal hysteresis(CH)from Ocular Response Analyzer(ORA)were analyzed.Further,the correlation between the demarcation line depth and ORA-related biomechanical parameters were analyzed.RESULTS:No significant differences in UDVA,postoperative CCT,or mean K values were found between the 2 groups at 1 to 12mo postoperative follow-up(all P>0.05).The changes of CRF was significantly lower in the LASIK Xtra group compared to the LASIK group(all P<0.05)at all the postoperative visits.The changes of CH were significantly higher in the LASIK Xtra group(all P<0.05).No significant differences were discovered regarding the changes of IOPcc and IOPg posperatively(all P>0.05).Out of 52 cases in the LASIK Xtra group,the demarcation line was present in 40 eyes(77%).The average depth of the demarcation was 220.73±42.70μm(136 to 288μm).No significant correlation was observed between the depth of the demarcation line and any of the ORA-related biomechanical parameters such as IOPcc,IOPg,CRF and CH at 12mo(all P>0.05).CONCLUSION:Both procedures demonstrate comparable outcomes in terms of visual acuity,refraction and ablation predictability.This study confirms that corneal biomechanical properties of the included patients weakened after both procedures,but the cornea after LASIK Xtra are stiffer than conventional LASIK.
文摘With the growth of global protein demand and the development of plant-based foods,pea protein,as a low-allergenic,nutritionally balanced and environmentally friendly plant protein,has shown great potential in replacing animal protein.Pea protein is mainly composed of globulin and albumin,with a protein content of 20%to 30%,and has a balanced amino acid composition,as well as being rich in minerals and dietary fiber.It also possesses good foaming,gelling,emulsifying and antioxidant functional properties.However,pea protein also has inherent defects that limit its application in the food industry.This article systematically reviews the extraction techniques,functional properties,modification methods and application fields of pea protein,and focuses on evaluating the effects of different extraction and modification strategies on protein yield and functional properties.Research shows that ultrasonic-assisted alkaline extraction can reduce solvent usage by 55%,shorten extraction time by 50%,and increase extraction rate by 12.51%;under optimized conditions,ultrafiltration membrane technology can achieve a protein purity of 91%.In terms of modification,ultrasonic treatment increases foaming capacity by 37.4%,and phenolic cross-linking increases gel strength from 3.0 kPa to 48 kPa.This article provides data support and theoretical reference for the efficient extraction and functional optimization of pea protein,and has promoting significance for its wide application in plant-based foods.
基金The National Natural Science Foundation of China(No.21005016)the Foundation of Educational Commission of Jiangsu Province(No.JHB2011-2)
文摘In order to improve the substrate diffusion properties and stability of an immobilized enzyme alginate microgels modified with TiO2 nanoparticles were employed as the enzyme immobilizing support.Ionotropic gelation was applied for the preparation of hybrid gels while Ca2＋ Ce3＋ Ni2＋Cu2＋and Fe3＋were employed as the crosslinkers.Papain was selected as the model enzyme. UV-Vis spectroscopy was employed to investigate the activity of papain to evaluate kinetics and stability.Analysis results show that the highest affinity the lowest Michaelis-Menten constant Km =11.0 mg/mL and the highest stability are obtained when using Cu2＋as the crosslinker.The effect of the mass ratio of TiO2 to papain on the stability and leakage of papain is also investigated and the results show that 10∶1 TiO2∶papain is optimal because the proper use of TiO2 can reduce enzyme leakage and ensure enzyme stability.Preparing Cu/alginate/TiO2 hybrid gels via ionotropic gelation can provide a satisfactory diffusion capability and enzyme stability.
基金supported by the National Natural Science Foundation of China (Grant No. 50575106)High Technology Project of Jiangsu Province, P. R. China (Grant No. BG2007046)
文摘Ultra High Molecular Weight Polyethylene(UHMWPE)has been widely used as a bearing material for artificial joint replacement over forty years.It is usually crosslinked by gamma rays irradiation before its implantation into human body.In this study,UHMWPE and UHMWPE/nano-hydroxyapatite(n-HA)composite were prepared by vacuum hot-pressing method.The prepared materials were irradiated by gamma rays in vacuum and molten heat treated in vacuum just after irradiation.The effect of filling n-HA with gamma irradiation on tribological properties of UHMWPE was investigated by using friction and wear experimental machine(model MM-200)under deionized water lubrication.Micro-morphology of worn surface was observed by metallographic microscope.Contact angle and hardness of the materials were also measured.The results show that contact angle and hardness are changed by filling n-HA and gamma irradiation.Friction coefficient and wear rate under deionized water lubrication are reduced by filling n-HA.While friction coefficient is increased and wear rate is reduced significantly by gamma irradiation.The worn surface of unfilled material is mainly characterized as adhesive wear and abrasive wear,and that of n-HA filled material is mainly characterized as abrasive wear.After gamma irradiation,the degrees of adhesive and abrasive wear for unfilled material and abrasive wear of n-HA filled material are significantly reduced.Unfilled and filled materials after irradiation are mainly shown as slight fatigue wear.The results indicate that UHMWPE and UHMWPE/n-HA irradiated at the dose of 150 kGy can be used as bearing materials in artificial joints for its excellent wear resistance compared to original UHMWPE.
基金financially supported by the Technical Innovation Project of National Institute of Clean and Low-Carbon Energy(No.15H0543)the Open Project of State Key Laboratory of Polymer Materials Engineering of China(Sichuan University)(No.sklpme2015-4-11)
文摘Crosslinking reactions of high density polyethylene with low peroxide concentrations ranging from 0.1 wt% to 1.0 wt% at temperatures of 170, 180 and 190 ℃ were monitored by rheological measurements. A critical gel forms at the peroxide concentration of 0.2 wt%, where the transition from long chain branching generation to crosslinking network formation could occur. Rheokinetics of crosslinking can be fitted well by Ding-Leonov＇s model. The curing rate k2 at the earlier stage exhibits about 3 times acceleration per 10 ~C with increasing temperature, while the equilibrium modulus G＇ at the fully cured stage is almost independent of temperature. Influences of crosslinking on the subsequent crystallization behaviors were detected by DSC measurements. Above the critical gel concentration, crystallization is largely retarded as evidenced by the lower crystallization temperature Tc and crystallinity Xc due to the network formation. The secondary crystallization valley located at the temperature near 80 ℃ can be observed above the critical concentration, which becomes more evident with the increasing peroxide concentration and curing temperature. This phenomenon provides another evidence of crystallization retardation by the crosslinking network.
基金supported by National "863" High-tech R & D Program of China(No. 2007AA03Z317)the National Natural Science Foundation of China(No.31070870)+1 种基金"973" Program of the Ministry of Science and Technology of China (No.2007CB714502, 2007CB936000)Shanghai Municipal Committee of Science and Techology (No. 08520740300, 1052nm06100 and 09JC1416500)
文摘Objective： Procyanidins （PC） are widely available natural polyphenols. The present study is designed to investigate if PC can inhibit angiogenesis in lung adenocarcinoma xenografts through crosslinking vascular extracellular matrix （ECM） and preventing proteolysis by matrix metalloproteinases （MMPs）. Methods： Using the in vitro MMP-2 proteolysis and in vivo subcutaneous implantation models, we investigated if PC crosslinking inhibits MMP-mediated proteolysis. Using a cultured cell detachment assay, an in vitro angiogenesis assay, and a cell proliferation assay, we investigated if PC inhibits MMP-2-mediated endothelial cell detachment, angiogenesis, and cell proliferation, respectively. Using tumor xenografts, we evaluated if PC can inhibit growth of lung adenocarcinoma. Results： PC crosslink vascular ECM proteins, protecting them against proteolysis by MMPs in vitro and in vivo, protecting cultured human umbilical vein endothelial cells from detachment by MMP-2, and inhibiting in vitro angiogenesis. However, PC （0.75-100 μg/mL） did not inhibit vascular and tumor cells proliferation. PC injections （30 mg PC/kg bodyweight） in situ had anticancer effects on xenografts of lung adenocarcinoma, most likely by inhibiting angiogenesis during ECM proteolysis by MMPs. Conclusion： The results suggest that PC may be important MMP inhibitors that can be used as therapeutic anticancer agents.
文摘AIM: To evaluate the efficacy and safety of corneal collagen crosslinking (01) to prevent the progression of post-laser in situ keratomileusis (LASIK) corneal ectasia. METHODS: In a prospective, nonrandomized, single-centre study, CXL was performed in 20 eyes of 11 patients who had LASIK for myopic astigmatism and subsequently developed keratectasia. The procedure included instillation of 0.1% riboflavin-20% dextrane solution 30 minutes before UVA irradiation and every 5 minutes for an additional 30 minutes during irradiation. The eyes were evaluated preoperatively and at 1-, 3-, 6-, and 12-month intervals. The complete ophthalmologic examination comprised uncorrected visual acuity, best spectacle-corrected visual acuity, endothelial cell count, ultrasound pachymetry, corneal topography, and in vivo confocal microscopy. RESULTS: CXL appeared to stabilise or partially reverse the progression of post-LASIK corneal ectasia without apparent complication in our cohort. UCVA and BCVA improvements were statistically significant (P<0.05)beyond 12 months after surgery (improvement of 0.07 and 0.13 logMAR at 1 year, respectively). Mean baseline flattest meridian keratometry and mean steepest meridian keratometry reduction (improvement of 2.00 and 1.50 diopters (D), respectively) were statistically significant (P < 0.05) at 12 months postoperatively. At 1 year after 01, mean endothelial cell count did not deteriorate. Mean thinnest cornea pachymetry increased significantly. CONCLUSION: The results of the study showed a long-term stability of post-LASIK corneal ectasia after crosslinking without relevant side effects. It seems to be a safe and promising procedure to stop the progression of post-LASIK keratectasia, thereby avoiding or delaying keratoplasty.
