Based on the rapid advancements in nanomaterials and nanotechnology,the Nanofluidic Reverse Electrodialysis(NRED)has attracted significant attention as an innovative and promising energy conversion strategy for extrac...Based on the rapid advancements in nanomaterials and nanotechnology,the Nanofluidic Reverse Electrodialysis(NRED)has attracted significant attention as an innovative and promising energy conversion strategy for extracting sustainable and clean energy fromthe salinity gradient energy.However,the scarcity of research investigating the intricate multi-factor coupling effects on the energy conversion performance,especially the trade-offs between ion selectivity and mass transfer in nanochannels,of NRED poses a great challenge to achieving breakthroughs in energy conversion processes.This numerical study innovatively investigates the multi-factor coupling effect of three critical operational factors,including the nanochannel configuration,the temperature field,and the concentration difference,on the energy conversion processes of NRED.In this work,a dimensionless amplitude parameter s is introduced to emulate the randomly varied wall configuration of nanochannels that inherently occur in practical applications,thereby enhancing the realism and applicability of our analysis.Numerical results reveal that the application of a temperature gradient,which is oriented in opposition to the concentration gradient,enhances the ion transportation and selectivity simultaneously,leading to an enhancement in both output power and energy conversion efficiency.Additionally,the increased fluctuation of the nanochannel wall from s=0 to s=0.08 improves ion selectivity yet raises ion transport resistance,resulting in an enhancement in output power and energy conversion efficiency but a slight reduction in current.Furthermore,with increasing the concentration ratio cH/cL from 10 to 1000,either within a fixed temperature field or at a constant dimensionless amplitude,the maximumpower consistently attains its optimal value at a concentration ratio of 100 but the cation transfer number experiences amonotonic decrease across this entire range of concentration ratios.Finally,uponmodifying the operational parameters fromthe baseline condition of s=0,c_(H)/c_(L)=10,andΔT=0 K to the targetedconditionof s=0.08,c_(H)/c_(L)=50,andΔT=25 K,there is a concerted improvement observed in the open-circuit potential,short-circuit current,andmaximumpower,with respective increments of 8.86%,204.97%,and 232.01%,but a reduction in cation transfer number with a notable decrease of 15.37%.展开更多
Ultrasonic vibration-assisted grinding(UVAG)is an effective and promising method for machining of hard-to-cut materials.This article proposed an ultrasonic vibration plate device enabling the longitudinal full-wave an...Ultrasonic vibration-assisted grinding(UVAG)is an effective and promising method for machining of hard-to-cut materials.This article proposed an ultrasonic vibration plate device enabling the longitudinal full-wave and transverse half-wave(L2T1)vibration mode for UVAG.The characteristics of two-dimensional coupled vibration in different directions were analyzed on the basis of apparent elastic method and finite element method.Furthermore,a correction factor was applied to correct the frequency error caused by the apparent elastic method.Finally,the comparative experiments between the conventional creep-feed grinding and UVAG of Inconel 718 nickel-based superalloy were carried out.The results indicate that the apparent elastic method with the correction factor is accurate for the design of plate device under the L2T1 vibration mode.Compared with the conventional creep-feed grinding,the UVAG causes the reduction of grinding force and the improvement of machined surface quality of Inconel 718 nickel-based superalloy.Furthermore,under the current experimental conditions,the optimal ultrasonic vibration amplitude is determined as 6μm,with which the minimum surface roughness is achieved.展开更多
A series of In_(x)Sb_(2-x)S_(3) nanosheets modified g-C_(3)N_(4)(In_(x)Sb_(2-x)S_(3)-TCN)heterojunctions with different g-C_(3)N_(4) contents were fabricated by an in situ deposition method.All the In_(x)Sb_(2-x)S_(3)...A series of In_(x)Sb_(2-x)S_(3) nanosheets modified g-C_(3)N_(4)(In_(x)Sb_(2-x)S_(3)-TCN)heterojunctions with different g-C_(3)N_(4) contents were fabricated by an in situ deposition method.All the In_(x)Sb_(2-x)S_(3)-TCN composites were applied as photocatalysts in Cr(Ⅵ)polluted water treatment and the results displayed that In_(x)Sb_(2-x)S_(3)-TCN could effectively remove Cr(Ⅵ)under visible light through synergistic effects of adsorption and photocatalytic reduction.Especially,In_(x)Sb_(2-x)S_(3)-TCN-70(70 mg g-C_(3)N_(4)) exhibited the most excellent adsorption and photocatalytic reduction performance among all composites,which possessed a high equilibrium adsorption capacity of 12.45 mg/g in a 30.0 mg/L Cr(Ⅵ)aqueous solution,and reduced Cr(Ⅵ)to Cr(Ⅲ)within 10 min under visible light irradiation.DRS and PL results indicated that the interfacial coupling effect between g-C_(3)N_(4)and In_(x)Sb_(2-x)S_(3) enhanced the utilization efficiency of visible light and suppressed photoinduced carrier recombination,which improved the photocatalytic activity of composites.Moreover,the photocatalyst exhibited satisfactory reduction activity and good stability after 5 cycles of Cr(Ⅵ)adsorptionphotoreduction.展开更多
Calcareous sand is typically known as a problematic marine sediment because of its diverse morphology and complex inner pore structure.However,the coupling effects of morphology and inner pores on the mechanical prope...Calcareous sand is typically known as a problematic marine sediment because of its diverse morphology and complex inner pore structure.However,the coupling effects of morphology and inner pores on the mechanical properties of calcareous sand particles have rarely been investigated and understood.In this study,apparent contours and internal pore distributions of calcareous sand particles were obtained by three-dimensional(3D)scanning imaging and X-ray micro-computed tomography(X-mCT),respectively.It was revealed that calcareous sand particles with different outer morphologies have different porosities and inner pore distributions because of their original sources and particle transport processes.In addition,a total of 120 photo-related compression tests and 4923D discrete element simulations of four specific shaped particles,i.e.bulky,angular,dendritic and flaky,with variations in the inner pore distribution were conducted.The macroscopic particle strength and Weibull modulus obtained from the physical tests are not positively correlated with the porosity or regularity in shape,indicating the existence of coupling effect of particle shape and pore distribution.The shape effect on the particle strength first increases with the porosity and then decreases.The particle crushing of relatively regular particles is governed by the porosity,but that of extremely irregular particles is governed by the particle shape.The particle strength increases with the uniformity of the pore distribution.Particle fragmentation is mainly dependant on tensile bond strength,and the degree of tensile failure is considerably impacted by the particle shape but limited by the pore distribution.展开更多
The AFM images were obtained by an atomic force microscope (AFM) and transformed from the deformation of AFM micro cantilever probe. However, due to the surface topography and surface forces applied on the AFM tip of ...The AFM images were obtained by an atomic force microscope (AFM) and transformed from the deformation of AFM micro cantilever probe. However, due to the surface topography and surface forces applied on the AFM tip of sample, the deformation of AFM probe results in obvious edge effects and coupling effects in the AFM images.The deformation of AFM probe was analyzed,the mechanism of the edge effects and the coupling effects was investigated, and their results in the AFM images were studied. It is demonstrated by the theoretical analysis and AFM experiments that the edge effects make lateral force images more clear than the topography images,also make extraction of frictional force from lateral force images more complex and difficult. While the coupling effects make the comparison between topography images and lateral force images more advantage to acquire precise topography information by AFM.展开更多
We explore the behaviors of optically coupled topological corner states in supercell arrays composed of photonic crystal rods,where each supercell is a second-order topological insulator.Our findings indicate that the...We explore the behaviors of optically coupled topological corner states in supercell arrays composed of photonic crystal rods,where each supercell is a second-order topological insulator.Our findings indicate that the coupled corner states possess nondegenerate eigenfrequencies at theΓpoint,with coupled dipole corner states excited resonantly by incident plane waves and displaying a polarization-independent characteristic.The resonance properties of coupled dipole corner states can be effectively modulated via evanescently near-field coupling,while multipole decomposition shows that they are primarily dominated by electric quadrupole moment and magnetic dipole moment.Furthermore,we demonstrate that these coupled corner states can form surface lattice resonances driven by diffractively far-field coupling,leading to a dramatic increase in the quality factor.This work introduces more optical approaches to tailoring photonic topological states,and holds potential applications in mid-infrared topological micro-nano devices.展开更多
Based on the results of two dimension velo city structure, 1∶100 000 aeromagnetic anomaly, 1∶200 000 bouguer gravity anom aly and seismic anisotropy of Jiaodong and neighboring region in Shandong, China , the info...Based on the results of two dimension velo city structure, 1∶100 000 aeromagnetic anomaly, 1∶200 000 bouguer gravity anom aly and seismic anisotropy of Jiaodong and neighboring region in Shandong, China , the information of geophysical field was divided into two parts: deep and sh allow focus fields. And then, the information of two different fields was c ombined with that of deep seated geology and ore deposit features. The syntheti c result was adopted to analyze three dimension structure, to probe into crust mantle coupling effects of mineralization and dynamics of ore formation system .展开更多
As drilling operations move into remote locations and extreme water depths, recoil analysis requires more careful considerations and the incidence of emergency disconnect is increased inevitably. To accurately capture...As drilling operations move into remote locations and extreme water depths, recoil analysis requires more careful considerations and the incidence of emergency disconnect is increased inevitably. To accurately capture the recoil dynamics of a deep-water riser in an emergency disconnect scenario, researchers typically focus on modelling the influential subsystems (e.g., the tensioner, the mud discharge and seawater refilling process) which can be solved in the preprocessing, and then the determined parameters are transmitted into an existing global riser analysis software. Distinctively, the current study devotes efforts into the coupling effects resulting from that the suspended riser reacts the platform heave motion via the tensioner system in the course of recoil and the discharging fluid column follows the oscillation of the riser in the mud discharge process. Four simulation models are established based on lumped mass method employing different formulas for the top boundary condition of the riser and the discharging flow acceleration. It demonstrates that the coupling effects discussed above can significantly affect the recoil behavior during the transition phase from initial disconnect to the final hang-off state. It is recommended to develop a fully- coupled integrated model for recoil analysis and anti-recoil control system design before extreme deep-water applications.展开更多
The water content and nutrient in soil are two main determine factors to crop yield and quality, managements of which in field are of great importance to maintain sustainable high yield. The objective of this study wa...The water content and nutrient in soil are two main determine factors to crop yield and quality, managements of which in field are of great importance to maintain sustainable high yield. The objective of this study was to measure the uptake, forms, and use efficiency of phosphorus （P） in wheat under four levels of irrigation （W0, W1, W2, and W3） and three levels of P application （P0, P1, and P2） through two growth seasons of wheat （2008-2010）. The field experiment was carried out in a low level of soil P concentration and the eultivar was Jimai 20. The results indicated that P fertilizer combined with irrigation not only improved the activity of phosphatase in soil, but also increased P accumulation in wheat, similar results was found in the grain of wheat, the content of total P increased significantly. Meanwhile, the mainly existence forms of P in grain were the lecithoid-P and labile organic-P. On the other hand, in comparison to the irrigation, the dry matter and grain P production efficiency and postponing P application of wheat increased with increasing Papplication rates within the range of 0-180 kg P2O5 ha-1. The interaction between P and irrigation also significantly （P〈0.01） affected on the P accumulation, grain total P, grain phospholipid P, and P production efficiency. In this study, therefore, the P applications and irrigation improved grain P production efficiency and postponing P application of winter wheat, and W2P2 treatment （180 kg P2O5 ha-1 combination with 120 mm irrigation） had a high P accumulation and P use efficiency, it was an optimum level for P fertilizer application and irrigation in this region.展开更多
Global urbanization is exerting severe stress and having far-reaching impacts on the eco-environment, and yet there exists a complex non-linear coupling relationship between the two. Research on the interactive coupli...Global urbanization is exerting severe stress and having far-reaching impacts on the eco-environment, and yet there exists a complex non-linear coupling relationship between the two. Research on the interactive coupling effect between urbanization and the eco-environment will be a popular area of study and frontier in international earth system science and sustainability science in the next 10 years, while also being a high-priority research topic of particular interest to international organizations. This paper systematically collates and summarizes the international progress made in research on interactive coupling theory, coupling relationships, coupling mechanisms, coupling laws, coupling thresholds, coupling models and coupling optimization decision support systems. The research shows that urbanization and eco-environment interactive coupling theories include the Kuznets curve theory, telecoupling theory, planetary boundaries theory, footprint family theory and urban metabolism theory; most research on interactive coupling relationships is concerned with single- element coupling relationships, such as those between urbanization and water, land, atmosphere, climate change, ecosystems and biodiversity; the majority of research on interactive coupling mechanisms and laws focuses on five research paradigms, including coupled human and nature systems, complex social-ecological systems, urban ecosystems, social-economic-natural complex ecosystems, and urbanization development and eco-environment constraint ring; the majority of interactive coupling simulations use STIRPAT models, coupling degree models, multi-agent system models and big data urban computer models; and research has been carried out on urbanization and eco-environment coupling thresholds, coercing risk and optimal decision support systems. An objective evaluation of progress in international research on interactive coupling between urbanization and the eco-environment suggests that there are six main research focal points and six areas lacking research： a lot of research exists on macroscopic coupling effects, with little research on urban agglomeration and scale coupling effects; considerable research exists on sin-gle-dimension coupling effects, with little on multiple-dimension coupling effects; a great deal exists on ＂one-to-one＂ dual- element coupling effects, with little on ＂many-to-many＂ multiple-element coupling effects; a lot exists on positive feedback coupling effects, and little on negative feedback coupling effects; a great deal exists on empirical coupling effects, and little on theoretical coupling effects; a great deal exists on the use of simple quantitative methods, and little on using integrated simulation methods. Future studies should focus on coupling effects between urbanization in urban agglomerations and the eco-environment, spatial scale coupling effects, multi-dimensional coupling effects, telecoupling effects, ＂one-to-many＂ and ＂many-to-many＂ element coupling effects, and positive and negative feedback coupling effects. There is also a need to strengthen the development and application of dynamic models for multi-element,-scale,-scenario,-module and-agent integrated spatiotemporal coupling systems and further improve theoretical innovations in coupling effect research and integrate and form complete and diverse coupling theoretical systems.展开更多
In a three-sphere system, the middle sphere is acted upon by two opposite depletion forces from the other two spheres. It is found that, in this system, the two depletion forces are coupled with each other and result ...In a three-sphere system, the middle sphere is acted upon by two opposite depletion forces from the other two spheres. It is found that, in this system, the two depletion forces are coupled with each other and result in a strengthened depletion force. So the difference of the depletion forces of the three-sphere system and its corresponding two two-sphere systems is introduced to describe the coupling effect of the depletion interactions. The numerical results obtained by Monte- Carlo simulations show that this coupling effect is affected by both the concentration of small spheres and the geometrical confinement. Meanwhile, it is also found that the mechanisms of the coupling effect and the effect on the depletion force from the ~eometry factor are the same.展开更多
Soil-structure interfaces(SSI)are common in geotechnical structures,and understanding their shear behavior is essential for effective design.However,the coupling effects of particle shape and interface roughness on SS...Soil-structure interfaces(SSI)are common in geotechnical structures,and understanding their shear behavior is essential for effective design.However,the coupling effects of particle shape and interface roughness on SSI remain understudied.This study addresses this gap by employing five types of super-ellipsoid particles with varying asphericity(η)values to model non-spherical particles.Interface shear tests with different roughness levels(Rn)were conducted using Discrete Element Method(DEM)simulations.The results show that bothηand Rn significantly influence shear strength,localized shear band thickness,and soil fabric,with two types of coupling effects:single-factor dominance and double-factor interaction.The influence on coordination number(C_(n))and probability distribution of normalized contact force is more straightforward.Specifically,non-spherical particles exhibit a higher initial C_(n) due to enhanced interlocking,while Rn has a lesser impact.The normalized contact force at the interface follows an exponential distribution,similar to pure soil,and is largely independent of η and Rn.Notably,the shear zone is divided into three equal parts for soil fabric analysis.These findings offer new insights into SSI,contributing to more effective and safer geotechnical designs.展开更多
To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests ...To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests were conducted,and a corresponding piecewise damage constitutive model(PDCM)was established.We found that both dry-wet cycling and precompression stress deteriorate the physical properties,alter the microscopic characteristics,and reduce the mechanical properties of the LHF.These degradations are particularly pronounced under the CEDWCPS,although the magnitude of these changes gradually diminishes with the progression of dry-wet cycling.Meanwhile,they also reduce the deformation degree,prolong the micropore compaction stage,shorten the unstable crack propagation stage,lower the frequency and intensity of AE events,decrease the high-amplitude and high-frequency AE signals,enlarge crack scales,and shorten the crack initiation time.Among the changes of these indicators,the dry-wet cycling plays a dominant role.The crack types of LHF under the CEDWCPS(LHFCEDWCPS)are predominantly tensile cracks,supplemented by shear cracks.The failure mode can be defined as tensileshear composite failure.Finally,the established PDCM effectively captures the nonlinear deformation of micropore and the linear deformation of the matrix in LHFCEDWCPS,with all corresponding R^(2) consistently exceeding 0.97.展开更多
High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear beh...High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.展开更多
This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SE...This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.展开更多
For the floating structures in deepwater, the coupling effects of the mooring lines and risers on the motion responses of the structures become increasingly significant. Viscous damping, inertial mass, current loading...For the floating structures in deepwater, the coupling effects of the mooring lines and risers on the motion responses of the structures become increasingly significant. Viscous damping, inertial mass, current loading and restoring, etc. from these slender structures should be carefully handled to accurately predict the motion responses and line tensions. For the spar platforms, coupling the mooring system and riser with the vessel motion typically results in a reduction in extreme motion responses. This article presents numerical simulations and model tests on a new cell-truss spar platform in the State Key Laboratory of Ocean Engineering in Shanghai Jiaotong University. Results from three calculation methods, including frequency-domain analysis, time-domain semi-coupled and fully-coupled analyses, were compared with the experimental data to find the applicability of different approaches. Proposals for the improvement of numerical calculations and experimental technique were tabled as well.展开更多
Dynamic characteristics of large permanent magnet direct‐drive generators(PMDGs)considering electromagnetic–structural coupling effects are analyzed in this study.Using the conformal mapping method,the scalar magnet...Dynamic characteristics of large permanent magnet direct‐drive generators(PMDGs)considering electromagnetic–structural coupling effects are analyzed in this study.Using the conformal mapping method,the scalar magnetic potential of the air gap magnetic field considering the slot effect is calculated.On the basis of the discrete current element and magnetic equivalent circuit model,the local magnetic saturation effect of the stator and rotor is quantitatively simulated and the air gap magnetic field intensity distribution is obtained via numerical simulation.A series of uniformly distributed equivalent electromagnetic springs are introduced to develop an electromagnetic–structural coupling finite element PMDG model.The proposed air gap field analysis method is verified by the finite element analysis results.On the basis of the test platform for the Goldwind 1.5MW PMDG,both modal and dynamic response tests for the stator/rotor coupling system are conducted,and the results are compared with the natural frequencies,mode shapes,and vibration responses obtained using the numerical model.The effects of the air gap length and rotor speed on the natural frequencies of the coupling system are analyzed.The proposed model has the potential to accurately evaluate the PMDG vibration energy,avoiding resonance points,and maintaining stable operations of the unit.展开更多
Sodium-ion batteries have garnered significant attention as a cost-effective alternative to lithium-ion batteries due to the abundance and affordability of sodium precursors.However,the lack of suitable electrode mate...Sodium-ion batteries have garnered significant attention as a cost-effective alternative to lithium-ion batteries due to the abundance and affordability of sodium precursors.However,the lack of suitable electrode materials with both high capacity and excellent stability continues to hinder their practical viability.Herein,we couple lattice strain and sulfur deficiency effects in a tin monosulfide/reduced graphene oxide composite to enhance sodium storage performance.Experimental results and theoretical calculations reveal that the synergistic effects of lattice strain and sulfur vacancies in tin monosulfide promote rapid(de)intercalation near the surface/edge of the material,thereby enhancing its pseudocapacitive sodium storage properties.Consequently,the strained and defective tin monosulfide/reduced graphene oxide composite demonstrates a high reversible capacity of 511.82 mAh g^(-1) at 1 A g^(-1) and an outstanding rate capability of 450.60 mAh g^(-1) at 3 A g^(-1).This study offers an effective strategy for improving sodium storage performance through lattice strain and defect engineering.展开更多
Single-atom catalysts(SACs)have emerged as one of the most competitive catalysts toward a variety of important electrochemical reactions,thanks to their maximum atom economy,unique electronic and geometric structures....Single-atom catalysts(SACs)have emerged as one of the most competitive catalysts toward a variety of important electrochemical reactions,thanks to their maximum atom economy,unique electronic and geometric structures.However,the role of SACs supports on the catalytic performance does not receive enough research attentions.Here,we report an efficient route for synthesis of single atom Zn loading on the N-doped carbon nano-onions(ZnN/CNO).ZnN/CNO catalysts show an excellent high selectivity for CO_(2) electro-reduction to CO with a Faradaic efficiency of CO(FECO)up to 97%at -0.47 V(vs.reversible hydrogen electrode,RHE)and remarkable durability without activity decay.To our knowledge,ZnN/CNO is the best activity for the Zn based catalysts up to now,and superior to single atom Zn loading on the two-dimensional planar and porous structure of graphene substrate,although the graphene with larger surface area.The exact role of such carbon nano-onions(CNO)support is studied systematically by coupling characterizations and electrochemistry with density functional theory(DFT)calculations,which have attributed such good performance to the increased curvature.Such increased curvature modifies the surface charge,which then changes the adsorption energies of key intermediates,and improves the selectivity for CO generation accordingly.展开更多
The traditional qualitative analysis of the individual factors on the kinetic parameters cannot sufficiently reveal the mechanism underlying urea hydrolysis in soil.This study aimed at revealing the coupling effects o...The traditional qualitative analysis of the individual factors on the kinetic parameters cannot sufficiently reveal the mechanism underlying urea hydrolysis in soil.This study aimed at revealing the coupling effects of the three factors on urease activity(V_(0)),hydrolysis rate constant(K_(u)),and activation energy(Ea)and establishing the quantitative model for K_(u) under the coupling condition.Laboratory culture experiments were conducted under different temperatures(T)(15℃,20℃,25℃,and 35℃),moisture contents(θ)(60%,80%,and 100%of field capacities),and nitrogen application rates(F)(247 mg/kg,309 mg/kg,371 mg/kg,and 433 mg/kg).The urea content was measured daily.Results showed that the effects of moisture content,temperature,nitrogen application rate,and their interaction on V_(0) and K_(u) were in the descending order:T,F,T^(*)F,θ,T^(*)θ,F^(*)θ,T^(*)θ^(*)F.The effect of single factor and two-factor coupling on V_(0) was extremely significant(p<0.01),whereas the effect of the three-factor coupling on V_(0) was negligible.The effects of three factors and their interaction on K_(u) were extremely significant(p<0.01).The effects of moisture content,nitrogen application rate,and their interaction on Ea were in the descending order:F,θ,F^(*)θ.The effects of two factors and their interaction on Ea were not significant.The mean absolute percentage error(MAPE)values of the established K_(u-1)(θ,T,F)and K_(u-2)(θ,T,F)models were 3.14%and 4.60%,respectively.The MAPE of the traditional Arrhenius model K_(u-3)(T)was 6.75%.The accuracy of the proposed three-factor interaction model was superior to that of the traditional single factor model.The results supplemented the mechanism of urea hydrolysis and improved the prediction accuracy of K_(u).展开更多
基金funded by the National Natural Science Foundation of China[52106246]the Postgraduate Research&Practice innovation Program of Jiangsu Province[KYCX24_1641].
文摘Based on the rapid advancements in nanomaterials and nanotechnology,the Nanofluidic Reverse Electrodialysis(NRED)has attracted significant attention as an innovative and promising energy conversion strategy for extracting sustainable and clean energy fromthe salinity gradient energy.However,the scarcity of research investigating the intricate multi-factor coupling effects on the energy conversion performance,especially the trade-offs between ion selectivity and mass transfer in nanochannels,of NRED poses a great challenge to achieving breakthroughs in energy conversion processes.This numerical study innovatively investigates the multi-factor coupling effect of three critical operational factors,including the nanochannel configuration,the temperature field,and the concentration difference,on the energy conversion processes of NRED.In this work,a dimensionless amplitude parameter s is introduced to emulate the randomly varied wall configuration of nanochannels that inherently occur in practical applications,thereby enhancing the realism and applicability of our analysis.Numerical results reveal that the application of a temperature gradient,which is oriented in opposition to the concentration gradient,enhances the ion transportation and selectivity simultaneously,leading to an enhancement in both output power and energy conversion efficiency.Additionally,the increased fluctuation of the nanochannel wall from s=0 to s=0.08 improves ion selectivity yet raises ion transport resistance,resulting in an enhancement in output power and energy conversion efficiency but a slight reduction in current.Furthermore,with increasing the concentration ratio cH/cL from 10 to 1000,either within a fixed temperature field or at a constant dimensionless amplitude,the maximumpower consistently attains its optimal value at a concentration ratio of 100 but the cation transfer number experiences amonotonic decrease across this entire range of concentration ratios.Finally,uponmodifying the operational parameters fromthe baseline condition of s=0,c_(H)/c_(L)=10,andΔT=0 K to the targetedconditionof s=0.08,c_(H)/c_(L)=50,andΔT=25 K,there is a concerted improvement observed in the open-circuit potential,short-circuit current,andmaximumpower,with respective increments of 8.86%,204.97%,and 232.01%,but a reduction in cation transfer number with a notable decrease of 15.37%.
基金financially supported by the National Natural Science Foundation of China(Nos.51921003 and 51775275)National Key Laboratory of Science and Technology on Helicopter Transmission(Nanjing University of Aeronautics and Astronautics)(No.HTL-A-20G01)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX20_0179)。
文摘Ultrasonic vibration-assisted grinding(UVAG)is an effective and promising method for machining of hard-to-cut materials.This article proposed an ultrasonic vibration plate device enabling the longitudinal full-wave and transverse half-wave(L2T1)vibration mode for UVAG.The characteristics of two-dimensional coupled vibration in different directions were analyzed on the basis of apparent elastic method and finite element method.Furthermore,a correction factor was applied to correct the frequency error caused by the apparent elastic method.Finally,the comparative experiments between the conventional creep-feed grinding and UVAG of Inconel 718 nickel-based superalloy were carried out.The results indicate that the apparent elastic method with the correction factor is accurate for the design of plate device under the L2T1 vibration mode.Compared with the conventional creep-feed grinding,the UVAG causes the reduction of grinding force and the improvement of machined surface quality of Inconel 718 nickel-based superalloy.Furthermore,under the current experimental conditions,the optimal ultrasonic vibration amplitude is determined as 6μm,with which the minimum surface roughness is achieved.
基金Projects(41977129,21607176,42007138) supported by the National Natural Science Foundation of ChinaProject(kq1802011) supported by the Changsha Outstanding Innovative Youth Training Program,ChinaProject(2017JJ3516)supported by the Natural Science Foundation of Hunan Province,China。
文摘A series of In_(x)Sb_(2-x)S_(3) nanosheets modified g-C_(3)N_(4)(In_(x)Sb_(2-x)S_(3)-TCN)heterojunctions with different g-C_(3)N_(4) contents were fabricated by an in situ deposition method.All the In_(x)Sb_(2-x)S_(3)-TCN composites were applied as photocatalysts in Cr(Ⅵ)polluted water treatment and the results displayed that In_(x)Sb_(2-x)S_(3)-TCN could effectively remove Cr(Ⅵ)under visible light through synergistic effects of adsorption and photocatalytic reduction.Especially,In_(x)Sb_(2-x)S_(3)-TCN-70(70 mg g-C_(3)N_(4)) exhibited the most excellent adsorption and photocatalytic reduction performance among all composites,which possessed a high equilibrium adsorption capacity of 12.45 mg/g in a 30.0 mg/L Cr(Ⅵ)aqueous solution,and reduced Cr(Ⅵ)to Cr(Ⅲ)within 10 min under visible light irradiation.DRS and PL results indicated that the interfacial coupling effect between g-C_(3)N_(4)and In_(x)Sb_(2-x)S_(3) enhanced the utilization efficiency of visible light and suppressed photoinduced carrier recombination,which improved the photocatalytic activity of composites.Moreover,the photocatalyst exhibited satisfactory reduction activity and good stability after 5 cycles of Cr(Ⅵ)adsorptionphotoreduction.
基金the Fundamental Research Funds for the Central Universities,China(Grant No.B210203032)the National Natural Science Foundation of China(Grant No.52279097)the Green and Blue Project of Jiangsu Province,China.
文摘Calcareous sand is typically known as a problematic marine sediment because of its diverse morphology and complex inner pore structure.However,the coupling effects of morphology and inner pores on the mechanical properties of calcareous sand particles have rarely been investigated and understood.In this study,apparent contours and internal pore distributions of calcareous sand particles were obtained by three-dimensional(3D)scanning imaging and X-ray micro-computed tomography(X-mCT),respectively.It was revealed that calcareous sand particles with different outer morphologies have different porosities and inner pore distributions because of their original sources and particle transport processes.In addition,a total of 120 photo-related compression tests and 4923D discrete element simulations of four specific shaped particles,i.e.bulky,angular,dendritic and flaky,with variations in the inner pore distribution were conducted.The macroscopic particle strength and Weibull modulus obtained from the physical tests are not positively correlated with the porosity or regularity in shape,indicating the existence of coupling effect of particle shape and pore distribution.The shape effect on the particle strength first increases with the porosity and then decreases.The particle crushing of relatively regular particles is governed by the porosity,but that of extremely irregular particles is governed by the particle shape.The particle strength increases with the uniformity of the pore distribution.Particle fragmentation is mainly dependant on tensile bond strength,and the degree of tensile failure is considerably impacted by the particle shape but limited by the pore distribution.
文摘The AFM images were obtained by an atomic force microscope (AFM) and transformed from the deformation of AFM micro cantilever probe. However, due to the surface topography and surface forces applied on the AFM tip of sample, the deformation of AFM probe results in obvious edge effects and coupling effects in the AFM images.The deformation of AFM probe was analyzed,the mechanism of the edge effects and the coupling effects was investigated, and their results in the AFM images were studied. It is demonstrated by the theoretical analysis and AFM experiments that the edge effects make lateral force images more clear than the topography images,also make extraction of frictional force from lateral force images more complex and difficult. While the coupling effects make the comparison between topography images and lateral force images more advantage to acquire precise topography information by AFM.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.62275271,12272407,and 62275269)the National Key Research and Development Program of China (Grant No.2022YFF0706005)+1 种基金the Natural Science Foundation of Hunan Province,China (Grant Nos.2023JJ40683,2022JJ40552,and 2020JJ5646)the Program for New Century Excellent Talents in University,China (Grant No.NCET-12-0142)。
文摘We explore the behaviors of optically coupled topological corner states in supercell arrays composed of photonic crystal rods,where each supercell is a second-order topological insulator.Our findings indicate that the coupled corner states possess nondegenerate eigenfrequencies at theΓpoint,with coupled dipole corner states excited resonantly by incident plane waves and displaying a polarization-independent characteristic.The resonance properties of coupled dipole corner states can be effectively modulated via evanescently near-field coupling,while multipole decomposition shows that they are primarily dominated by electric quadrupole moment and magnetic dipole moment.Furthermore,we demonstrate that these coupled corner states can form surface lattice resonances driven by diffractively far-field coupling,leading to a dramatic increase in the quality factor.This work introduces more optical approaches to tailoring photonic topological states,and holds potential applications in mid-infrared topological micro-nano devices.
文摘Based on the results of two dimension velo city structure, 1∶100 000 aeromagnetic anomaly, 1∶200 000 bouguer gravity anom aly and seismic anisotropy of Jiaodong and neighboring region in Shandong, China , the information of geophysical field was divided into two parts: deep and sh allow focus fields. And then, the information of two different fields was c ombined with that of deep seated geology and ore deposit features. The syntheti c result was adopted to analyze three dimension structure, to probe into crust mantle coupling effects of mineralization and dynamics of ore formation system .
基金financially supported by the National Natural Science Foundation of China(Grant No.51879161)
文摘As drilling operations move into remote locations and extreme water depths, recoil analysis requires more careful considerations and the incidence of emergency disconnect is increased inevitably. To accurately capture the recoil dynamics of a deep-water riser in an emergency disconnect scenario, researchers typically focus on modelling the influential subsystems (e.g., the tensioner, the mud discharge and seawater refilling process) which can be solved in the preprocessing, and then the determined parameters are transmitted into an existing global riser analysis software. Distinctively, the current study devotes efforts into the coupling effects resulting from that the suspended riser reacts the platform heave motion via the tensioner system in the course of recoil and the discharging fluid column follows the oscillation of the riser in the mud discharge process. Four simulation models are established based on lumped mass method employing different formulas for the top boundary condition of the riser and the discharging flow acceleration. It demonstrates that the coupling effects discussed above can significantly affect the recoil behavior during the transition phase from initial disconnect to the final hang-off state. It is recommended to develop a fully- coupled integrated model for recoil analysis and anti-recoil control system design before extreme deep-water applications.
基金financial supported by the National Natural Science Foundation of China(30900876 and 31101127)the Key Technology R&D Program of China(2012BAD14B17)+1 种基金the Special Research Funding for Public Benefit Industries (Agriculture) of China(201103001)the Major Innovation Project for Applied Technology of Shandong Province,China
文摘The water content and nutrient in soil are two main determine factors to crop yield and quality, managements of which in field are of great importance to maintain sustainable high yield. The objective of this study was to measure the uptake, forms, and use efficiency of phosphorus （P） in wheat under four levels of irrigation （W0, W1, W2, and W3） and three levels of P application （P0, P1, and P2） through two growth seasons of wheat （2008-2010）. The field experiment was carried out in a low level of soil P concentration and the eultivar was Jimai 20. The results indicated that P fertilizer combined with irrigation not only improved the activity of phosphatase in soil, but also increased P accumulation in wheat, similar results was found in the grain of wheat, the content of total P increased significantly. Meanwhile, the mainly existence forms of P in grain were the lecithoid-P and labile organic-P. On the other hand, in comparison to the irrigation, the dry matter and grain P production efficiency and postponing P application of wheat increased with increasing Papplication rates within the range of 0-180 kg P2O5 ha-1. The interaction between P and irrigation also significantly （P〈0.01） affected on the P accumulation, grain total P, grain phospholipid P, and P production efficiency. In this study, therefore, the P applications and irrigation improved grain P production efficiency and postponing P application of winter wheat, and W2P2 treatment （180 kg P2O5 ha-1 combination with 120 mm irrigation） had a high P accumulation and P use efficiency, it was an optimum level for P fertilizer application and irrigation in this region.
基金Major Program of the National Natural Science Foundation of China,No.41590840,No.41590842
文摘Global urbanization is exerting severe stress and having far-reaching impacts on the eco-environment, and yet there exists a complex non-linear coupling relationship between the two. Research on the interactive coupling effect between urbanization and the eco-environment will be a popular area of study and frontier in international earth system science and sustainability science in the next 10 years, while also being a high-priority research topic of particular interest to international organizations. This paper systematically collates and summarizes the international progress made in research on interactive coupling theory, coupling relationships, coupling mechanisms, coupling laws, coupling thresholds, coupling models and coupling optimization decision support systems. The research shows that urbanization and eco-environment interactive coupling theories include the Kuznets curve theory, telecoupling theory, planetary boundaries theory, footprint family theory and urban metabolism theory; most research on interactive coupling relationships is concerned with single- element coupling relationships, such as those between urbanization and water, land, atmosphere, climate change, ecosystems and biodiversity; the majority of research on interactive coupling mechanisms and laws focuses on five research paradigms, including coupled human and nature systems, complex social-ecological systems, urban ecosystems, social-economic-natural complex ecosystems, and urbanization development and eco-environment constraint ring; the majority of interactive coupling simulations use STIRPAT models, coupling degree models, multi-agent system models and big data urban computer models; and research has been carried out on urbanization and eco-environment coupling thresholds, coercing risk and optimal decision support systems. An objective evaluation of progress in international research on interactive coupling between urbanization and the eco-environment suggests that there are six main research focal points and six areas lacking research： a lot of research exists on macroscopic coupling effects, with little research on urban agglomeration and scale coupling effects; considerable research exists on sin-gle-dimension coupling effects, with little on multiple-dimension coupling effects; a great deal exists on ＂one-to-one＂ dual- element coupling effects, with little on ＂many-to-many＂ multiple-element coupling effects; a lot exists on positive feedback coupling effects, and little on negative feedback coupling effects; a great deal exists on empirical coupling effects, and little on theoretical coupling effects; a great deal exists on the use of simple quantitative methods, and little on using integrated simulation methods. Future studies should focus on coupling effects between urbanization in urban agglomerations and the eco-environment, spatial scale coupling effects, multi-dimensional coupling effects, telecoupling effects, ＂one-to-many＂ and ＂many-to-many＂ element coupling effects, and positive and negative feedback coupling effects. There is also a need to strengthen the development and application of dynamic models for multi-element,-scale,-scenario,-module and-agent integrated spatiotemporal coupling systems and further improve theoretical innovations in coupling effect research and integrate and form complete and diverse coupling theoretical systems.
基金Project supported by the Scientific Research Fund of Hunan Provincial Education Department, China (Grant Nos. 08B028 and 10A075)the Natural Science Foundation of Hunan Province, China (Grant No. 08jj6043)
文摘In a three-sphere system, the middle sphere is acted upon by two opposite depletion forces from the other two spheres. It is found that, in this system, the two depletion forces are coupled with each other and result in a strengthened depletion force. So the difference of the depletion forces of the three-sphere system and its corresponding two two-sphere systems is introduced to describe the coupling effect of the depletion interactions. The numerical results obtained by Monte- Carlo simulations show that this coupling effect is affected by both the concentration of small spheres and the geometrical confinement. Meanwhile, it is also found that the mechanisms of the coupling effect and the effect on the depletion force from the ~eometry factor are the same.
基金The authors sincerely appreciate the financial support from the National Natural Science Foundation of China(grant No.52278364)the Shenzhen Science and Technology Plan(grant No.20220808143139001)Shenzhen University 2035 Program for Excellent Research(grant No.2022B007)。
文摘Soil-structure interfaces(SSI)are common in geotechnical structures,and understanding their shear behavior is essential for effective design.However,the coupling effects of particle shape and interface roughness on SSI remain understudied.This study addresses this gap by employing five types of super-ellipsoid particles with varying asphericity(η)values to model non-spherical particles.Interface shear tests with different roughness levels(Rn)were conducted using Discrete Element Method(DEM)simulations.The results show that bothηand Rn significantly influence shear strength,localized shear band thickness,and soil fabric,with two types of coupling effects:single-factor dominance and double-factor interaction.The influence on coordination number(C_(n))and probability distribution of normalized contact force is more straightforward.Specifically,non-spherical particles exhibit a higher initial C_(n) due to enhanced interlocking,while Rn has a lesser impact.The normalized contact force at the interface follows an exponential distribution,similar to pure soil,and is largely independent of η and Rn.Notably,the shear zone is divided into three equal parts for soil fabric analysis.These findings offer new insights into SSI,contributing to more effective and safer geotechnical designs.
基金supported by the Yunnan Province Science and Technology Plan Project(No.202403AA080001-4)the Key Research and Development Project of Guangxi,China(No.guikeAB24010144)the National Key Research and Development Project of China(Nos.2021YFB3901402 and 2018YFC1504802)。
文摘To reveal the influence of coupled effects of dry-wet cycling and precompression stress(CEDWCPS)on the damage evolution of limestone with horizontal fissure(LHF),a series of degradation and uniaxial compression tests were conducted,and a corresponding piecewise damage constitutive model(PDCM)was established.We found that both dry-wet cycling and precompression stress deteriorate the physical properties,alter the microscopic characteristics,and reduce the mechanical properties of the LHF.These degradations are particularly pronounced under the CEDWCPS,although the magnitude of these changes gradually diminishes with the progression of dry-wet cycling.Meanwhile,they also reduce the deformation degree,prolong the micropore compaction stage,shorten the unstable crack propagation stage,lower the frequency and intensity of AE events,decrease the high-amplitude and high-frequency AE signals,enlarge crack scales,and shorten the crack initiation time.Among the changes of these indicators,the dry-wet cycling plays a dominant role.The crack types of LHF under the CEDWCPS(LHFCEDWCPS)are predominantly tensile cracks,supplemented by shear cracks.The failure mode can be defined as tensileshear composite failure.Finally,the established PDCM effectively captures the nonlinear deformation of micropore and the linear deformation of the matrix in LHFCEDWCPS,with all corresponding R^(2) consistently exceeding 0.97.
基金support from the National Key Research and Development Program of China(Grant No.2022YFE0137200)supported by the Taishan Scholars Program and Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety(Grant No.SKLGME023003).
文摘High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.
基金National Natural Science Foundation of China under Grant Nos.U2139208 and 52278516Key Laboratory of Earthquake Engineering and Engineering Vibration,China Earthquake Administration under Grant No.2024D15Key Laboratory of Soft Soil Characteristic and Engineering Environment,Tianjin Chengjian University under Grant No.2022SCEEKL003。
文摘This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.
基金the Major Fundamental Research Program of Science and Technology Commission of Shanghai Municipality (Grant No. 05DJ14001)the National High Technology Research and Development Program of China (863 Program, Grant No. 2006AA09A107)the State Key Laboratory of Ocean Engineering in Shanghai Jiaotong University are truly appreciated
文摘For the floating structures in deepwater, the coupling effects of the mooring lines and risers on the motion responses of the structures become increasingly significant. Viscous damping, inertial mass, current loading and restoring, etc. from these slender structures should be carefully handled to accurately predict the motion responses and line tensions. For the spar platforms, coupling the mooring system and riser with the vessel motion typically results in a reduction in extreme motion responses. This article presents numerical simulations and model tests on a new cell-truss spar platform in the State Key Laboratory of Ocean Engineering in Shanghai Jiaotong University. Results from three calculation methods, including frequency-domain analysis, time-domain semi-coupled and fully-coupled analyses, were compared with the experimental data to find the applicability of different approaches. Proposals for the improvement of numerical calculations and experimental technique were tabled as well.
基金National Natural Science Foundation of China,Grant/Award Numbers:11872222,11902173State Key Laboratory of Tribology,Grant/Award Number:SKLT2021D11。
文摘Dynamic characteristics of large permanent magnet direct‐drive generators(PMDGs)considering electromagnetic–structural coupling effects are analyzed in this study.Using the conformal mapping method,the scalar magnetic potential of the air gap magnetic field considering the slot effect is calculated.On the basis of the discrete current element and magnetic equivalent circuit model,the local magnetic saturation effect of the stator and rotor is quantitatively simulated and the air gap magnetic field intensity distribution is obtained via numerical simulation.A series of uniformly distributed equivalent electromagnetic springs are introduced to develop an electromagnetic–structural coupling finite element PMDG model.The proposed air gap field analysis method is verified by the finite element analysis results.On the basis of the test platform for the Goldwind 1.5MW PMDG,both modal and dynamic response tests for the stator/rotor coupling system are conducted,and the results are compared with the natural frequencies,mode shapes,and vibration responses obtained using the numerical model.The effects of the air gap length and rotor speed on the natural frequencies of the coupling system are analyzed.The proposed model has the potential to accurately evaluate the PMDG vibration energy,avoiding resonance points,and maintaining stable operations of the unit.
基金supported by the National Natural Science Foundation of China(no.22109023,no.22179022,and no.22209027)the Youth Innovation Fund of Fujian Province(no.2021J05043 and no.2022J05046)+5 种基金the National Key Research and Development Program of China(2023YFC3906300)the FuXiaQuan National Independent Innovation Demonstration Zone Collaborative Innovation Platform(no.2022-P-027)the·“Hundred Talents·Plan”of Fujian Provincethe“Top Young Talents of Young Eagle”Program of Fujian Provincethe Award Program for Fujian Minjiang Scholar Professorshipthe Talent Fund Program of Fujian Normal University.
文摘Sodium-ion batteries have garnered significant attention as a cost-effective alternative to lithium-ion batteries due to the abundance and affordability of sodium precursors.However,the lack of suitable electrode materials with both high capacity and excellent stability continues to hinder their practical viability.Herein,we couple lattice strain and sulfur deficiency effects in a tin monosulfide/reduced graphene oxide composite to enhance sodium storage performance.Experimental results and theoretical calculations reveal that the synergistic effects of lattice strain and sulfur vacancies in tin monosulfide promote rapid(de)intercalation near the surface/edge of the material,thereby enhancing its pseudocapacitive sodium storage properties.Consequently,the strained and defective tin monosulfide/reduced graphene oxide composite demonstrates a high reversible capacity of 511.82 mAh g^(-1) at 1 A g^(-1) and an outstanding rate capability of 450.60 mAh g^(-1) at 3 A g^(-1).This study offers an effective strategy for improving sodium storage performance through lattice strain and defect engineering.
基金This work was supported by the National Key R&D Program of China(2020YFA0710404)the Beijing Natural Science Foundation(2182077)the National Natural Science Foundation of China(21477136,51972281,and 21703250).
文摘Single-atom catalysts(SACs)have emerged as one of the most competitive catalysts toward a variety of important electrochemical reactions,thanks to their maximum atom economy,unique electronic and geometric structures.However,the role of SACs supports on the catalytic performance does not receive enough research attentions.Here,we report an efficient route for synthesis of single atom Zn loading on the N-doped carbon nano-onions(ZnN/CNO).ZnN/CNO catalysts show an excellent high selectivity for CO_(2) electro-reduction to CO with a Faradaic efficiency of CO(FECO)up to 97%at -0.47 V(vs.reversible hydrogen electrode,RHE)and remarkable durability without activity decay.To our knowledge,ZnN/CNO is the best activity for the Zn based catalysts up to now,and superior to single atom Zn loading on the two-dimensional planar and porous structure of graphene substrate,although the graphene with larger surface area.The exact role of such carbon nano-onions(CNO)support is studied systematically by coupling characterizations and electrochemistry with density functional theory(DFT)calculations,which have attributed such good performance to the increased curvature.Such increased curvature modifies the surface charge,which then changes the adsorption energies of key intermediates,and improves the selectivity for CO generation accordingly.
基金supported by the National Natural Science Foundation of China(No.51579168 and No.51249002)the Natural Science Foundation of Shanxi Province of China(No.201601D011053)+1 种基金the Graduate Education Innovation Program of Shanxi Province of China(No.2016BY064)the Scientific and Technological Project of Shanxi Province of China(No.20140311016-6).
文摘The traditional qualitative analysis of the individual factors on the kinetic parameters cannot sufficiently reveal the mechanism underlying urea hydrolysis in soil.This study aimed at revealing the coupling effects of the three factors on urease activity(V_(0)),hydrolysis rate constant(K_(u)),and activation energy(Ea)and establishing the quantitative model for K_(u) under the coupling condition.Laboratory culture experiments were conducted under different temperatures(T)(15℃,20℃,25℃,and 35℃),moisture contents(θ)(60%,80%,and 100%of field capacities),and nitrogen application rates(F)(247 mg/kg,309 mg/kg,371 mg/kg,and 433 mg/kg).The urea content was measured daily.Results showed that the effects of moisture content,temperature,nitrogen application rate,and their interaction on V_(0) and K_(u) were in the descending order:T,F,T^(*)F,θ,T^(*)θ,F^(*)θ,T^(*)θ^(*)F.The effect of single factor and two-factor coupling on V_(0) was extremely significant(p<0.01),whereas the effect of the three-factor coupling on V_(0) was negligible.The effects of three factors and their interaction on K_(u) were extremely significant(p<0.01).The effects of moisture content,nitrogen application rate,and their interaction on Ea were in the descending order:F,θ,F^(*)θ.The effects of two factors and their interaction on Ea were not significant.The mean absolute percentage error(MAPE)values of the established K_(u-1)(θ,T,F)and K_(u-2)(θ,T,F)models were 3.14%and 4.60%,respectively.The MAPE of the traditional Arrhenius model K_(u-3)(T)was 6.75%.The accuracy of the proposed three-factor interaction model was superior to that of the traditional single factor model.The results supplemented the mechanism of urea hydrolysis and improved the prediction accuracy of K_(u).
