This paper describes a numerical simulation of thermal discharge in the cooling pool of an electrical power station, aiming to develop general-purpose computational programs for grid generation and flow/pollutant tran...This paper describes a numerical simulation of thermal discharge in the cooling pool of an electrical power station, aiming to develop general-purpose computational programs for grid generation and flow/pollutant transport in the complex domains of natural and artificial waterways. Three depth-averaged two-equation closure turbulence models, k-ε, k- w, and k- w, were used to close the quasi three-dimensional hydrodynamic model. The k- w model was recently established by the authors and is still in the testing process. The general-purpose computational programs and turbulence models will be involved in a software that is under development. The SIMPLE （Semi-Implicit Method for Pressure-Linked Equation） algorithm and multi-grid iterative method are used to solve the hydrodynamic fundamental governing equations, which are discretized on non-orthogonal boundary-fitted grids with a variable collocated arrangement. The results calculated with the three turbulence models were compared with one another. In addition to the steady flow and thermal transport simulation, the unsteady process of waste heat inpouring and development in the cooling pool was also investigated.展开更多
采用骤冷法处理不锈钢气体熔池耦合活性TIG焊高温熔池金属,通过控制开始冷却时间,在不影响焊缝成形的前提下,保留N元素在高温熔池内的分布状态,并采用俄歇电子能谱(auger electron spectroscopy,AES)分析了不同位置处N元素的分布规律....采用骤冷法处理不锈钢气体熔池耦合活性TIG焊高温熔池金属,通过控制开始冷却时间,在不影响焊缝成形的前提下,保留N元素在高温熔池内的分布状态,并采用俄歇电子能谱(auger electron spectroscopy,AES)分析了不同位置处N元素的分布规律.结果表明,在熄弧前0.6 s开始冷却时,骤冷效果最好.熔池内N元素沿深度方向整体呈现均匀分布,局部存在较大范围波动;熔池前部和后部边缘位置的氮含量略高于中心位置,熔池中部边缘位置的平均氮含量略低于中心位置;熔池后部总的平均氮含量略高于熔池前部,熔池中部总的平均氮含量介于两者之间.展开更多
基金supported by FAPESP (Foundation for Supporting Research in So Paulo State), Brazil, of the PIPE Project (Grant No. 2006/56475-3)
文摘This paper describes a numerical simulation of thermal discharge in the cooling pool of an electrical power station, aiming to develop general-purpose computational programs for grid generation and flow/pollutant transport in the complex domains of natural and artificial waterways. Three depth-averaged two-equation closure turbulence models, k-ε, k- w, and k- w, were used to close the quasi three-dimensional hydrodynamic model. The k- w model was recently established by the authors and is still in the testing process. The general-purpose computational programs and turbulence models will be involved in a software that is under development. The SIMPLE （Semi-Implicit Method for Pressure-Linked Equation） algorithm and multi-grid iterative method are used to solve the hydrodynamic fundamental governing equations, which are discretized on non-orthogonal boundary-fitted grids with a variable collocated arrangement. The results calculated with the three turbulence models were compared with one another. In addition to the steady flow and thermal transport simulation, the unsteady process of waste heat inpouring and development in the cooling pool was also investigated.
文摘采用骤冷法处理不锈钢气体熔池耦合活性TIG焊高温熔池金属,通过控制开始冷却时间,在不影响焊缝成形的前提下,保留N元素在高温熔池内的分布状态,并采用俄歇电子能谱(auger electron spectroscopy,AES)分析了不同位置处N元素的分布规律.结果表明,在熄弧前0.6 s开始冷却时,骤冷效果最好.熔池内N元素沿深度方向整体呈现均匀分布,局部存在较大范围波动;熔池前部和后部边缘位置的氮含量略高于中心位置,熔池中部边缘位置的平均氮含量略低于中心位置;熔池后部总的平均氮含量略高于熔池前部,熔池中部总的平均氮含量介于两者之间.
