Laser direct imaging(LDI)machines are advantageous for the fabrication of printed circuit boards(PCBs).Before digital lithography,a vision-based measurement(VBM)system was used to calibrate PCBs.However,calibration ac...Laser direct imaging(LDI)machines are advantageous for the fabrication of printed circuit boards(PCBs).Before digital lithography,a vision-based measurement(VBM)system was used to calibrate PCBs.However,calibration accuracy and efficiency are affected by multiple disturbances.To improve the accuracy and enhance the robustness of the VBM system,we propose a piezoelectric-actuated kangaroo-inspired bionic compliant mechanism(BioCM)and a flyingfocusing VBM controller.A piezoelectric actuator(PEA)generates highly accurate motion.The CM transfers the motion without losing accuracy or producing couplings.The kangaroo-inspired bionic differential structure enlarges the magnification of the PEA-CM.A BioCM-based VBM system was also constructed.A static analysis of the BioCM was conducted using the compliance matrix approach,and dynamics results were obtained.To enhance the service performance of the PEA-BioCM,we developed a flying-focusing VBM controller.PEG-based flying,PEA-actuated focusing,and MEMF-enhanced RRHT algorithms were used.A BioCM prototype was fabricated.Several prototype tests were conducted on the statics and dynamics.The prototype test results verified the performance of the BioCM and flying-VBM controller.Service test results demonstrated the calibration accuracy and robustness of the PEA-BioCM-based flying-VBM system.The proposed BioCM and controller can contribute to the development of next-generation LDI machines for fabricating high-density PCBs.展开更多
Kinematics and its related issues of a 3-DOF in-parallel compliant mechanismare focused on. The micro manipulation application that requires high accuracy is developed. Designof the developed micromanipulator is based...Kinematics and its related issues of a 3-DOF in-parallel compliant mechanismare focused on. The micro manipulation application that requires high accuracy is developed. Designof the developed micromanipulator is based on the modified Delta mechanism. The main advantages ofthis manipulator are the use of only revolute flexure hinges and the capability to produce puretranslation theoretically. The aim is to develop an efficient kinematic model used for positioningcontrol. For this purpose, the Jacobian matrix relating the end effector position with the actuatordisplacements is obtained by both theoretical derivation and experiment. Aiming at the abnormalityin the motion capabilities of the micromanipulator found in calibration experiment, the mobility ofthe compliant mechanism on a theoretical level is analyzed by using the matrix method and screwtheory. Both the experimental and theoretical results have verified that the compliant mechanismdoes have rotational motion.展开更多
Common compliant joints generally have limited range of motion, reduced fatigue life and high stress concentration. To overcome these shortcomings, periodically corrugated cantilever beam is applied to design complian...Common compliant joints generally have limited range of motion, reduced fatigue life and high stress concentration. To overcome these shortcomings, periodically corrugated cantilever beam is applied to design compliant joints. Basic corrugated beam unit is modeled by using pseudo-rigid-body method. The trajectory and deformation behavior of periodically corrugated cantilever beam are estimated by the transformation of coordinate and superposition of the deformation of corrugated beam units. Finite element analysis（FEA） is carried out on corrugated cantilever beam to estimate the accuracy of the pseudo-rigid-body model. Results show that the kinetostatic behaviors obtained by this method, which has a relative error less than 6%, has good applicability and corrugated cantilever beam has the characteristics of a large range of motion and high mechanical strength. The corrugated cantilever beam is then applied to design a flexible rotational joint to obtain a larger angle output. The paper proposes a pseudo-rigid-body model for corrugated cantilever beam and designed a flexible rotational joint with large angle output.展开更多
The majority of topology optimization of compliant mechanisms uses linear finite element models to find the structure responses.Because the displacements of compliant mechanisms are intrinsically large,the topological...The majority of topology optimization of compliant mechanisms uses linear finite element models to find the structure responses.Because the displacements of compliant mechanisms are intrinsically large,the topological design can not provide quantitatively accurate result.Thus,topological design of these mechanisms considering geometrical nonlinearities is essential.A new methodology for geometrical nonlinear topology optimization of compliant mechanisms under displacement loading is presented.Frame elements are chosen to represent the design domain because they are capable of capturing the bending modes.Geometrically nonlinear structural response is obtained by using the co-rotational total Lagrange finite element formulation,and the equilibrium is solved by using the incremental scheme combined with Newton-Raphson iteration.The multi-objective function is developed by the minimum strain energy and maximum geometric advantage to design the mechanism which meets both stiffness and flexibility requirements, respectively.The adjoint method and the direct differentiation method are applied to obtain the sensitivities of the objective functions. The method of moving asymptotes（MMA） is employed as optimizer.The numerical example is simulated to show that the optimal mechanism based on geometrically nonlinear formulation not only has more flexibility and stiffness than that based on linear formulation,but also has better stress distribution than the one.It is necessary to design compliant mechanisms using geometrically nonlinear topology optimization.Compared with linear formulation,the formulation for geometrically nonlinear topology optimization of compliant mechanisms can give the compliant mechanism that has better mechanical performance.A new method is provided for topological design of large displacement compliant mechanisms.展开更多
The material characteristics of a structure will change with temperature variation,and will induce stress within the structure.Currently,the optimal design for the topology of compliant mechanisms is mainly performed ...The material characteristics of a structure will change with temperature variation,and will induce stress within the structure.Currently,the optimal design for the topology of compliant mechanisms is mainly performed in single physical field.However,when compliant mechanisms work in high temperature environments,their displacement outputs are generated not only by mechanical load,but also by the temperature variation which may become the prominent factor.Therefore,the influence of temperature must be considered in the design.In this paper,a novel optimization method for multi-objective topology of thermo-mechanical compliant mechanisms is presented.First,the thermal field is analyzed with finite-element method,where the thermal strain is taken into account in the constitutive relation,and the equivalent nodal thermal load is derived with the principle of virtual work.Then the thermal load is converted into physical loads in elastic field,and the control equation of the thermo-mechanical compliant mechanism is obtained.Second,the mathematical model of the multi-objective topology optimization is built by incorporating both the flexibility and stiffness.Meanwhile,the coupling sensitivity function and the sensitivity analysis equations of thermal steady-state response are derived.Finally,optimality criteria algorithm is employed to obtain numerical solution of the multi-objective topology optimization.Numerical examples show that the compliant mechanisms have better performance and are more applicable if the temperature effect is taken into account in the design process.The presented modeling and analysis methods provide a new idea and an effective approach to topology optimization of compliant mechanisms in electrothermic coupling field and multiphysics fields.展开更多
A multi-objective scheme for structural topology optimization of distributed compliant mechanisms of micro-actuators in MEMS condition is presented in this work, in which mechanical flexibility and structural stiffnes...A multi-objective scheme for structural topology optimization of distributed compliant mechanisms of micro-actuators in MEMS condition is presented in this work, in which mechanical flexibility and structural stiffness are both considered as objective functions. The compliant micro-mechanism developed in this way can not only provide sufficient output work but also have sufficient rigidity to resist reaction forces and maintain its shape when holding the work-piece. A density filtering approach is also proposed to eliminate numerical instabilities such as checkerboards, mesh-dependency and one-node connected hinges occurring in resulting mechanisms. SIMP is used as the interpolation scheme to indicate the dependence of material modulus on element-regularized densities. The sequential convex programming method, such as the method of moving asymptotes （MMA）, is used to solve the optimization problem. The validation of the presented methodologies is demonstrated by a typical numerical example.展开更多
Analytical compliance model is vital to the flexure- based compliant mechanism in its mechanical design and motion control. The matrix is a common and effective approach in the compliance modeling while it is not well...Analytical compliance model is vital to the flexure- based compliant mechanism in its mechanical design and motion control. The matrix is a common and effective approach in the compliance modeling while it is not well developed for the closed-loop serial and parallel compliant mechanisms and is not applicable to the situation when the external loads are applied on the flexure mem- bers. Concise and explicit analytical compliance models of the serial flexure-based compliant mechanisms under arbitrary loads are derived by using the matrix method. An equivalent method is proposed to deal with the situation when the external loads are applied on the flexure mem- bers. The external loads are transformed to concentrated forces applied on the rigid links, which satisfy the equa- tions of static equilibrium and also guarantee that the deformations at the displacement output point remain unchanged. Then the matrix method can be still adopted for the compliance analysis of the compliant mechanism. Finally, several specific examples and an experimental testare given to verify the effectiveness of the compliance models and the force equivalent method. The research enriches the matrix method and provides concise analytical compliance models for the serial compliant mechanism.展开更多
Conventional flexible joints generally have limited range of motion and high stress concentration. To overcome these shortcomings, corrugated flexure beam（CF beam） is designed because of its large flexibility obtain...Conventional flexible joints generally have limited range of motion and high stress concentration. To overcome these shortcomings, corrugated flexure beam（CF beam） is designed because of its large flexibility obtained from longer overall length on the same span. The successful design of compliant mechanisms using CF beam requires manipulation of the stiffnesses as the design variables. Empirical equations of the CF beam stiffness components, except of the torsional stiffness, are obtained by curve-fitting method. The application ranges of all the parameters in each empirical equation are also discussed. The ratio of off-axis to axial stiffness is considered as a key characteristic of an effective compliant joint. And parameter study shows that the radius of semi-circular segment and the length of straight segment contribute most to the ratio. At last, CF beam is used to design translational and rotational flexible joints, which also verifies the validity of the empirical equations. CF beam with large flexibility is presented, and empirical equations of its stiffness are proposed to facilitate the design of flexible joint with large range of motion.展开更多
The morphing trailing edge based compliant mechanism is a developing technology which can increase lift-drag ratio for variable flight modes by bending down the trailing edge.Composite material design is integrated in...The morphing trailing edge based compliant mechanism is a developing technology which can increase lift-drag ratio for variable flight modes by bending down the trailing edge.Composite material design is integrated into topology optimization for the morphing trailing edge based compliant mechanism in the paper.A two-step optimization strategy is established to solve the integrated design problem.Initially,lamination parameters are introduced and viewed as a bridge between structure stiffness and fiber angles for composite material.Design variables include the lamination parameters and element density.The least-squares between actual and desired displacements at output points along trailing edge is adopted to evaluate the deformed capability of the trailing edge.An integrated optimization model for the composite morphing trailing edge is established with the volume constraints.The optimal topologic shape and lamination parameters are initially obtained.Subsequently,a least-squares optimization between fiber angles and the optimal lamination parameters is implemented to obtain optimal fiber angles.Finally,morphing capability of composites trailing edge based compliant mechanism is investigated by simulation and experiments.The results indicate the composites trailing edge based compliant mechanism can approximately bend down 8 degrees and satisfies the design requirement.展开更多
There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions...There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions of the crosssection(i.e., the thickness and the width). After reviewing the available equations, two thickness-to-width ratio Independent equations that are symmetric with respect to the two dimensions are obtained for evaluating the maximum torsion stress of rectangular cross-section beams. Based on the resulting equations, outside lamina emergent torsional joints are analyzed and some useful design Insights are obtained. These equations, together with the previous work on symmetric equations for calculating torsional compliance, provide a convenient and effective way for designing and optimizing torsional beams in compliant mechanisms.展开更多
This paper presents a new method for topology optimization of geometrical nonlinear compliant mechanisms using the element-free Galerkin method （EFGM）. The EFGM is employed as an alternative scheme to numerically so...This paper presents a new method for topology optimization of geometrical nonlinear compliant mechanisms using the element-free Galerkin method （EFGM）. The EFGM is employed as an alternative scheme to numerically solve the state equations by fully taking advantage of its capability in dealing with large displacement problems. In the meshless method, the imposition of essential boundary conditions is also addressed. The popularly studied solid isotropic material with the penalization （SIMP） scheme is used to represent the nonlinear dependence between material properties and regularized discrete densities. The output displacement is regarded as the objective function and the adjoint method is applied to finding the sensitivity of the design functions. As a result, the optimization of compliant mechanisms is mathematically established as a nonlinear programming problem, to which the method of moving asymptotes （MMA） belonging to the sequential convex programming can be applied. The availability of the present method is finally demonstrated with several widely investigated numerical examples.展开更多
In this work,bending fatigue behavior of thinner Zr_(61)Ti_(2)Cu_(25)Al_(12)(ZT1)BMG beams with thicknesses of 500μm and 100μm were investigated with three-point bending(3PB),to evaluate the reliability and safety o...In this work,bending fatigue behavior of thinner Zr_(61)Ti_(2)Cu_(25)Al_(12)(ZT1)BMG beams with thicknesses of 500μm and 100μm were investigated with three-point bending(3PB),to evaluate the reliability and safety of this potentially material used in compliant mechanisms under cyclic bending load.Fatigue endurance limits(FELs)of ZT1 beams with thicknesses of 500μm and 100μm were determined to be 470 MPa,and~0.3 of its tensile strength.Fatigue life and FEL of ZT1 beams in bending are substantially independent of the beam thickness,in the scale from 500μm down to 100μm.Fatigue cracks of all ZT1 beams initiated at the extrinsic microvoids,either indirectly derived from surface scratches during mechanical polishing or originated from as-cast process.However,fatigue crack propagation behavior is highly related to the magnitude of cyclic stress level.By interrupted fatigue tests,larger proportion about 60-70%of fatigue life was spent on crack propagation under high stress level,while crack initiation occupied larger proportion about 80-85%under low stress level.The medium stress level of about 590 MPa almost shared the crack-initiation life and crack-propagation life.In addition,there are two crack deflection mechanisms during cracks steady propagation stage.One mechanism is crack deflection along the interacted shear bands ahead of crack-tip,the other one is crack"jump"from one shear band to another shear band at a certain angle.These two mechanisms alternate dominate the crack propagation process,generating typical staircase-like crack propagation trajectory.Fatigue endurance limits of ZT1 beams in the form of either stress amplitude or strain amplitude are superior to traditional candidate materials in the field of compliant mechanisms,showing that the better reliability and larger deflection deformation can be achieved for flexible members made by ZT1 BMG even under cyclic loading.展开更多
A novel compliant mechanism with RPR degrees of freedom(DOF)is proposed where R and P represent rotation and translation DOFs,respectively.The proposed compliant mechanism is obtained from dimension synthesizing a 2-R...A novel compliant mechanism with RPR degrees of freedom(DOF)is proposed where R and P represent rotation and translation DOFs,respectively.The proposed compliant mechanism is obtained from dimension synthesizing a 2-RPU-UPR rigid parallel mechanism with the method of optimization of motion/force transfer characteristic.R,P and U represent rotation,translation and universal pairs,respectively.Firstly,inverse kinematics and Jacobian matrix are analyzed for the dimensional synthesis.Then,output transmission indexes of branches in the parallel mechanism are given.Dimensional synthesis is completed based on the normalized design parameter.And optimization of flexure joints based on constrained energy is carried out.Afterwards,the novel compliant mechanism is obtained by direct replacing method.Mechanical model of the compliant mechanism including static stiffness and input stiffness is built based on the pseudo-rigid body modeling method and virtual work principle.Finally,FEA simulation by Ansys Workbench is carried out to verify DOF,effectiveness of the dimension synthesis,and compliant model.Optimization of motion/force transfer characteristic is first applied for the design of compliant mechanisms to suppress drift of rotation axis in the paper.展开更多
An optimal topology design method for multiple inputs and multiple outputs compliant micro-manipulation system is presented. Firstly, the topology design problem is posed in terms of a multiple inputs load and several...An optimal topology design method for multiple inputs and multiple outputs compliant micro-manipulation system is presented. Firstly, the topology design problem is posed in terms of a multiple inputs load and several specified output deflections. The compliance and stiffness of the system are expressed by the mutual potential energy and strain energy, respectively, which can be controlled by a multi-critaria objective function. Secondly, based on the optimality criteria method, a model solution algorithm is presented. Finally, a numerical example is presented to show the validity oftbe presented technique. The optimal topology ofa 4 inputs and 4 outputs compliant mechanism is obtained by using the method, and the corresponding micro-positioning stage system is further designed.展开更多
Based on a modified pseudo-rigid-body model,the frequency characteristics and sensitivity of the large-deformation compliant mechanism are studied.Firstly,the pseudo-rigid-body model under the static and kinetic condi...Based on a modified pseudo-rigid-body model,the frequency characteristics and sensitivity of the large-deformation compliant mechanism are studied.Firstly,the pseudo-rigid-body model under the static and kinetic conditions is modified to enable the modified pseudo-rigid-body model to be more suitable for the dynamic analysis of the compliant mechanism.Subsequently,based on the modified pseudo-rigid-body model,the dynamic equations of the ordinary compliant four-bar mechanism are established using the analytical mechanics.Finally,in combination with the finite element analysis software ANSYS,the frequency characteristics and sensitivity of the compliant mechanism are analyzed by taking the compliant parallel-guiding mechanism and the compliant bistable mechanism as examples.From the simulation results,the dynamic characteristics of compliant mechanism are relatively sensitive to the structure size,section parameter,and characteristic parameter of material on mechanisms.The results could provide great theoretical significance and application values for the structural optimization of compliant mechanisms,the improvement of their dynamic properties and the expansion of their application range.展开更多
There is seldom approach developed for the initial topology design of flexure-based compliant mechanisms. The most commonly-used approaches, which start with an existing rigid-body mechanism, do not consider the perfo...There is seldom approach developed for the initial topology design of flexure-based compliant mechanisms. The most commonly-used approaches, which start with an existing rigid-body mechanism, do not consider the performances between different topologies. Moreover, they rely heavily on the rigid-body topology, therefore limit the diversity of compliant mechanisms topology. To obtain the optimal initial topology of such mechanisms directly from problem specifications without referencing to the existing mechanism topologies, a spring-joint method is presented for a restricted class of the serial passive flexure-based compliant mechanisms, which are the building blocks of parallel compliant mechanisms. The topology of the compliant mechanisms is represented by a serial spring-joint mechanism（SSJM） that is a traditional rigid-body mechanism with a torsional spring acting on each joint, and is described by position vectors of the spring-joints. A simplified compliance matrix, determined by the position vectors, is used to characterize the tip of the SSJM kinematically, and is optimized to ensure the desired freedoms of the compliant mechanisms during optimization. The topology optimization problem is formulated as finding out the optimal position of the spring-joints in a blank design domain with an objective function derived from the simplified compliance matrix. In design examples, syntheses of the compliant mechanisms with both single freedom and two decoupled freedoms are presented to illustrate the proposed method. The proposed method provides a new way for the initial design of flexure-based compliant mechanisms.展开更多
Compliant mechanisms have several advantages, especially smaller number of elements and therefore less movable joints. The flexural members furthermore allow an integration of special functions like balancing or locki...Compliant mechanisms have several advantages, especially smaller number of elements and therefore less movable joints. The flexural members furthermore allow an integration of special functions like balancing or locking. Especially fiber reinforced materials exhibit a wide range of function integration considering their compliance in passive as well active applications. To take advantage of compliant elements in applications a robust synthesis tool is needed. The synthesis based on topology optimization method or the pseudo rigid body approach leads to complex structures. Considering the use of fiber reinforced material a synthesis approach which leads to less complex structures is more suitable. For building up simple structures, with only one cantilever beam as compliant element（B） a graphical approach using the elastic similitude is the most efficient method. A step-by-step synthesis procedure is presented to synthesize compliant mechanisms with rotatory joints（R） and prismatic joints（P） to develop RRB/PRB- and RPB-linkages. Using the elastic similitude to implement these results into a graphical synthesis algorithm is the innovation part of this paper. It can be shown that this approach leads to a comfortable handling of beam elements during the synthesis, where the two free parameters can be directly coupled to scale and fix the orientation of the beam element. This advantage inherently shortens the development process. In giving an example the focus lies of the experimental approach, which also shows that the simple BERNOULLI beam model is valid and so the synthesis by using the elastic similitude. The method is presented and discussed by using an application for a cup holder mechanism made of fiber reinforced material.展开更多
This paper presents an in-depth study of Equivalent beam model (EBM).Firstly three-dimensional (3D) finite element analysis (FEA) model for circular flexure hinge developed by Zettl et al.was verified by the compariso...This paper presents an in-depth study of Equivalent beam model (EBM).Firstly three-dimensional (3D) finite element analysis (FEA) model for circular flexure hinge developed by Zettl et al.was verified by the comparison with Smith's experimental results and the 3D FEA model was feasible within 5.5% error.Then the accuracy of Timoshenko short-beam due to shear force was verified based on finite element method.The results showed that the EBM has good accuracy within 5% error for 1≤r/t≤3.Finally the EBM methodology was applied for the simulation optimal design of a bridge-type compliant mechanism.The results showed that the EBM methodology has very high numerical efficiency and satisfactory accuracy for simulation optimal design of planar compliant mechanism with flexure hinges.展开更多
Reducing the peak actuating force(PAF)and parasitic displacement is of high significance for improving the performance of compliant parallel mechanisms(CPMs).In this study,a 2-DOF 4-4R compliant parallel pointing mech...Reducing the peak actuating force(PAF)and parasitic displacement is of high significance for improving the performance of compliant parallel mechanisms(CPMs).In this study,a 2-DOF 4-4R compliant parallel pointing mechanism(4-4R CPPM)was used as the object,and the actuating force of the mechanism was optimized through redundant actuation.This was aimed at minimizing the PAF and parasitic displacement.First,a kinetostatic model of the redundantly actuated 4-4R CPPM was established to reveal the relationship between the input forces/displacements and the output displacements of the mobile platform.Subsequently,based on the established kinetostatic model,methods for optimizing the actuating force distribution with the aim of minimizing the PAF and parasitic displacement were introduced successively.Second,a simulated example of a mobile platform’s spatial pointing trajectory validated the accuracy of the kinetostatic model.The results show a less than 0.9%relative error between the analytical and finite element(FE)results,and the high consistency indicates the accuracy of the kinetostatic model.Then,the effectiveness of the method in minimizing the PAF and parasitic displacement was validated using two simulated examples.The results indicate that compared with the non-redundant actuation case,the PAF of the mechanism could be reduced by up to 50%,and the parasitic displacement was reduced by approximately three-four orders of magnitude by means of redundant actuation combined with the optimal distribution of the actuating force.As expected,with the reduction in parasitic displacement,the FE-results of the output angular displacements(θ_(x) andθ_(z))of the mobile platform were closer to the target oscillation trajectory.This further verified that the reduction in parasitic displacement is indeed effective in improving the motion accuracy of the mechanism.The advantage of this proposed method is that it reduces the PAF and parasitic displacement from the perspective of the actuating force control strategy,without the requirement of structural changes to the original mechanism.展开更多
基金Supported by Guangdong Basic and Applied Basic Research Foundation(Grant No.2025A1515011189)Commissioned Project of Enterprise(Grant Nos.25HK0029,25HK0030,23HK0809)+2 种基金"Ganpo Plan"Talent Project of Jiangxi Province(Grant No.jxkjcytd2024001)National Natural Science Foundation of China(Grant Nos.U24A20108,51905106)Guangzhou Basic and Applied Basic Research Foundation(Grant No.202201010398)。
文摘Laser direct imaging(LDI)machines are advantageous for the fabrication of printed circuit boards(PCBs).Before digital lithography,a vision-based measurement(VBM)system was used to calibrate PCBs.However,calibration accuracy and efficiency are affected by multiple disturbances.To improve the accuracy and enhance the robustness of the VBM system,we propose a piezoelectric-actuated kangaroo-inspired bionic compliant mechanism(BioCM)and a flyingfocusing VBM controller.A piezoelectric actuator(PEA)generates highly accurate motion.The CM transfers the motion without losing accuracy or producing couplings.The kangaroo-inspired bionic differential structure enlarges the magnification of the PEA-CM.A BioCM-based VBM system was also constructed.A static analysis of the BioCM was conducted using the compliance matrix approach,and dynamics results were obtained.To enhance the service performance of the PEA-BioCM,we developed a flying-focusing VBM controller.PEG-based flying,PEA-actuated focusing,and MEMF-enhanced RRHT algorithms were used.A BioCM prototype was fabricated.Several prototype tests were conducted on the statics and dynamics.The prototype test results verified the performance of the BioCM and flying-VBM controller.Service test results demonstrated the calibration accuracy and robustness of the PEA-BioCM-based flying-VBM system.The proposed BioCM and controller can contribute to the development of next-generation LDI machines for fabricating high-density PCBs.
基金This project is supported by National Natural Science Foundation of China (No.59775002 and No.50075010).
文摘Kinematics and its related issues of a 3-DOF in-parallel compliant mechanismare focused on. The micro manipulation application that requires high accuracy is developed. Designof the developed micromanipulator is based on the modified Delta mechanism. The main advantages ofthis manipulator are the use of only revolute flexure hinges and the capability to produce puretranslation theoretically. The aim is to develop an efficient kinematic model used for positioningcontrol. For this purpose, the Jacobian matrix relating the end effector position with the actuatordisplacements is obtained by both theoretical derivation and experiment. Aiming at the abnormalityin the motion capabilities of the micromanipulator found in calibration experiment, the mobility ofthe compliant mechanism on a theoretical level is analyzed by using the matrix method and screwtheory. Both the experimental and theoretical results have verified that the compliant mechanismdoes have rotational motion.
基金supported by National Natural Science Foundation of China(Grant Nos.51205134,91223201)Doctoral Fund of Ministry of Education of China(Grant No.20120172120001)+2 种基金Research Project of State Key Laboratory of Mechanical System and Vibration of China(Grant No.MSV201405)Guangdong Province Universities and Colleges Pearl River Scholar Funded Scheme(GDUPS,2010)Fundamental Research Funds for the Central Universities(Grant No.2013ZM012)
文摘Common compliant joints generally have limited range of motion, reduced fatigue life and high stress concentration. To overcome these shortcomings, periodically corrugated cantilever beam is applied to design compliant joints. Basic corrugated beam unit is modeled by using pseudo-rigid-body method. The trajectory and deformation behavior of periodically corrugated cantilever beam are estimated by the transformation of coordinate and superposition of the deformation of corrugated beam units. Finite element analysis（FEA） is carried out on corrugated cantilever beam to estimate the accuracy of the pseudo-rigid-body model. Results show that the kinetostatic behaviors obtained by this method, which has a relative error less than 6%, has good applicability and corrugated cantilever beam has the characteristics of a large range of motion and high mechanical strength. The corrugated cantilever beam is then applied to design a flexible rotational joint to obtain a larger angle output. The paper proposes a pseudo-rigid-body model for corrugated cantilever beam and designed a flexible rotational joint with large angle output.
基金supported by National Science Foundation for Distinguished Young Scholars of China(Grant No.50825504)National Natural Science Foundation of China(Grant No.50775073)United Fund of Natural Science Foundation of China and Guangdong Province (Grant No.U0934004)
文摘The majority of topology optimization of compliant mechanisms uses linear finite element models to find the structure responses.Because the displacements of compliant mechanisms are intrinsically large,the topological design can not provide quantitatively accurate result.Thus,topological design of these mechanisms considering geometrical nonlinearities is essential.A new methodology for geometrical nonlinear topology optimization of compliant mechanisms under displacement loading is presented.Frame elements are chosen to represent the design domain because they are capable of capturing the bending modes.Geometrically nonlinear structural response is obtained by using the co-rotational total Lagrange finite element formulation,and the equilibrium is solved by using the incremental scheme combined with Newton-Raphson iteration.The multi-objective function is developed by the minimum strain energy and maximum geometric advantage to design the mechanism which meets both stiffness and flexibility requirements, respectively.The adjoint method and the direct differentiation method are applied to obtain the sensitivities of the objective functions. The method of moving asymptotes（MMA） is employed as optimizer.The numerical example is simulated to show that the optimal mechanism based on geometrically nonlinear formulation not only has more flexibility and stiffness than that based on linear formulation,but also has better stress distribution than the one.It is necessary to design compliant mechanisms using geometrically nonlinear topology optimization.Compared with linear formulation,the formulation for geometrically nonlinear topology optimization of compliant mechanisms can give the compliant mechanism that has better mechanical performance.A new method is provided for topological design of large displacement compliant mechanisms.
基金supported by National Science Foundation for Distinguished Young Scholars of China (Grant No. 50825504)United Fund of National Natural Science Foundation of China and Guangdong Province (Grant No. U0934004)+1 种基金National Hi-tech Research and Development Program of National China (863 Program, Grant No. 2009AA04Z204)Fundamental Research Funds for the Central Universities (Grant No. D2102380)
文摘The material characteristics of a structure will change with temperature variation,and will induce stress within the structure.Currently,the optimal design for the topology of compliant mechanisms is mainly performed in single physical field.However,when compliant mechanisms work in high temperature environments,their displacement outputs are generated not only by mechanical load,but also by the temperature variation which may become the prominent factor.Therefore,the influence of temperature must be considered in the design.In this paper,a novel optimization method for multi-objective topology of thermo-mechanical compliant mechanisms is presented.First,the thermal field is analyzed with finite-element method,where the thermal strain is taken into account in the constitutive relation,and the equivalent nodal thermal load is derived with the principle of virtual work.Then the thermal load is converted into physical loads in elastic field,and the control equation of the thermo-mechanical compliant mechanism is obtained.Second,the mathematical model of the multi-objective topology optimization is built by incorporating both the flexibility and stiffness.Meanwhile,the coupling sensitivity function and the sensitivity analysis equations of thermal steady-state response are derived.Finally,optimality criteria algorithm is employed to obtain numerical solution of the multi-objective topology optimization.Numerical examples show that the compliant mechanisms have better performance and are more applicable if the temperature effect is taken into account in the design process.The presented modeling and analysis methods provide a new idea and an effective approach to topology optimization of compliant mechanisms in electrothermic coupling field and multiphysics fields.
基金Project supported by the National '973' Key Fundamental Research Project of China (No. 2003CB716207) the National '863' High-Tech Development Project of China (No.2003AA001031).
文摘A multi-objective scheme for structural topology optimization of distributed compliant mechanisms of micro-actuators in MEMS condition is presented in this work, in which mechanical flexibility and structural stiffness are both considered as objective functions. The compliant micro-mechanism developed in this way can not only provide sufficient output work but also have sufficient rigidity to resist reaction forces and maintain its shape when holding the work-piece. A density filtering approach is also proposed to eliminate numerical instabilities such as checkerboards, mesh-dependency and one-node connected hinges occurring in resulting mechanisms. SIMP is used as the interpolation scheme to indicate the dependence of material modulus on element-regularized densities. The sequential convex programming method, such as the method of moving asymptotes （MMA）, is used to solve the optimization problem. The validation of the presented methodologies is demonstrated by a typical numerical example.
基金Supported by National Natural Science Foundation of China(Grant No.51675292)National Science and Technology Major Project of China(Grant No.2015ZX04001002)Tsinghua University Initiative Scientific Research Program(Grant No.2014z22068)
文摘Analytical compliance model is vital to the flexure- based compliant mechanism in its mechanical design and motion control. The matrix is a common and effective approach in the compliance modeling while it is not well developed for the closed-loop serial and parallel compliant mechanisms and is not applicable to the situation when the external loads are applied on the flexure mem- bers. Concise and explicit analytical compliance models of the serial flexure-based compliant mechanisms under arbitrary loads are derived by using the matrix method. An equivalent method is proposed to deal with the situation when the external loads are applied on the flexure mem- bers. The external loads are transformed to concentrated forces applied on the rigid links, which satisfy the equa- tions of static equilibrium and also guarantee that the deformations at the displacement output point remain unchanged. Then the matrix method can be still adopted for the compliance analysis of the compliant mechanism. Finally, several specific examples and an experimental testare given to verify the effectiveness of the compliance models and the force equivalent method. The research enriches the matrix method and provides concise analytical compliance models for the serial compliant mechanism.
基金Supported by National Natural Science Foundation of China(Grant Nos.51205134,91223201)Doctoral Fund of Ministry of Education of China(Grant No.20120172120001)Research Project of State Key Laboratory of Mechanical System and Vibration,China(Grant No.MSV201405)
文摘Conventional flexible joints generally have limited range of motion and high stress concentration. To overcome these shortcomings, corrugated flexure beam（CF beam） is designed because of its large flexibility obtained from longer overall length on the same span. The successful design of compliant mechanisms using CF beam requires manipulation of the stiffnesses as the design variables. Empirical equations of the CF beam stiffness components, except of the torsional stiffness, are obtained by curve-fitting method. The application ranges of all the parameters in each empirical equation are also discussed. The ratio of off-axis to axial stiffness is considered as a key characteristic of an effective compliant joint. And parameter study shows that the radius of semi-circular segment and the length of straight segment contribute most to the ratio. At last, CF beam is used to design translational and rotational flexible joints, which also verifies the validity of the empirical equations. CF beam with large flexibility is presented, and empirical equations of its stiffness are proposed to facilitate the design of flexible joint with large range of motion.
基金co-supported by the National Natural Science Foundation of China(Nos.51375383 and 51575443)Natural Science Foundation of Shaanxi Province of China(No.2019JQ-728)Doctor’s Research Foundation of Xi’an University of Technology of China(No.102-451118017)。
文摘The morphing trailing edge based compliant mechanism is a developing technology which can increase lift-drag ratio for variable flight modes by bending down the trailing edge.Composite material design is integrated into topology optimization for the morphing trailing edge based compliant mechanism in the paper.A two-step optimization strategy is established to solve the integrated design problem.Initially,lamination parameters are introduced and viewed as a bridge between structure stiffness and fiber angles for composite material.Design variables include the lamination parameters and element density.The least-squares between actual and desired displacements at output points along trailing edge is adopted to evaluate the deformed capability of the trailing edge.An integrated optimization model for the composite morphing trailing edge is established with the volume constraints.The optimal topologic shape and lamination parameters are initially obtained.Subsequently,a least-squares optimization between fiber angles and the optimal lamination parameters is implemented to obtain optimal fiber angles.Finally,morphing capability of composites trailing edge based compliant mechanism is investigated by simulation and experiments.The results indicate the composites trailing edge based compliant mechanism can approximately bend down 8 degrees and satisfies the design requirement.
基金Supported by National Science Foundation Research of the United States (Grant No.1663345)National Natural Science Foundation of China(Grant No.51675396)Fundamental Research Fund for the Central Universities(Grant No.12K5051204021)
文摘There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions of the crosssection(i.e., the thickness and the width). After reviewing the available equations, two thickness-to-width ratio Independent equations that are symmetric with respect to the two dimensions are obtained for evaluating the maximum torsion stress of rectangular cross-section beams. Based on the resulting equations, outside lamina emergent torsional joints are analyzed and some useful design Insights are obtained. These equations, together with the previous work on symmetric equations for calculating torsional compliance, provide a convenient and effective way for designing and optimizing torsional beams in compliant mechanisms.
基金the National '973' Key Fundamental Research Projects of China(No.2003CB716207)the National '863' High-Tech Development Projects of China(No.2006AA04Z162)also the Australian Research Council(No.ARC-DP0666683).
文摘This paper presents a new method for topology optimization of geometrical nonlinear compliant mechanisms using the element-free Galerkin method （EFGM）. The EFGM is employed as an alternative scheme to numerically solve the state equations by fully taking advantage of its capability in dealing with large displacement problems. In the meshless method, the imposition of essential boundary conditions is also addressed. The popularly studied solid isotropic material with the penalization （SIMP） scheme is used to represent the nonlinear dependence between material properties and regularized discrete densities. The output displacement is regarded as the objective function and the adjoint method is applied to finding the sensitivity of the design functions. As a result, the optimization of compliant mechanisms is mathematically established as a nonlinear programming problem, to which the method of moving asymptotes （MMA） belonging to the sequential convex programming can be applied. The availability of the present method is finally demonstrated with several widely investigated numerical examples.
基金supported by the National Natural Science Foundation of China under Grant No.51571192。
文摘In this work,bending fatigue behavior of thinner Zr_(61)Ti_(2)Cu_(25)Al_(12)(ZT1)BMG beams with thicknesses of 500μm and 100μm were investigated with three-point bending(3PB),to evaluate the reliability and safety of this potentially material used in compliant mechanisms under cyclic bending load.Fatigue endurance limits(FELs)of ZT1 beams with thicknesses of 500μm and 100μm were determined to be 470 MPa,and~0.3 of its tensile strength.Fatigue life and FEL of ZT1 beams in bending are substantially independent of the beam thickness,in the scale from 500μm down to 100μm.Fatigue cracks of all ZT1 beams initiated at the extrinsic microvoids,either indirectly derived from surface scratches during mechanical polishing or originated from as-cast process.However,fatigue crack propagation behavior is highly related to the magnitude of cyclic stress level.By interrupted fatigue tests,larger proportion about 60-70%of fatigue life was spent on crack propagation under high stress level,while crack initiation occupied larger proportion about 80-85%under low stress level.The medium stress level of about 590 MPa almost shared the crack-initiation life and crack-propagation life.In addition,there are two crack deflection mechanisms during cracks steady propagation stage.One mechanism is crack deflection along the interacted shear bands ahead of crack-tip,the other one is crack"jump"from one shear band to another shear band at a certain angle.These two mechanisms alternate dominate the crack propagation process,generating typical staircase-like crack propagation trajectory.Fatigue endurance limits of ZT1 beams in the form of either stress amplitude or strain amplitude are superior to traditional candidate materials in the field of compliant mechanisms,showing that the better reliability and larger deflection deformation can be achieved for flexible members made by ZT1 BMG even under cyclic loading.
基金National Natural Science Foundation of China(Grant No.51975007).
文摘A novel compliant mechanism with RPR degrees of freedom(DOF)is proposed where R and P represent rotation and translation DOFs,respectively.The proposed compliant mechanism is obtained from dimension synthesizing a 2-RPU-UPR rigid parallel mechanism with the method of optimization of motion/force transfer characteristic.R,P and U represent rotation,translation and universal pairs,respectively.Firstly,inverse kinematics and Jacobian matrix are analyzed for the dimensional synthesis.Then,output transmission indexes of branches in the parallel mechanism are given.Dimensional synthesis is completed based on the normalized design parameter.And optimization of flexure joints based on constrained energy is carried out.Afterwards,the novel compliant mechanism is obtained by direct replacing method.Mechanical model of the compliant mechanism including static stiffness and input stiffness is built based on the pseudo-rigid body modeling method and virtual work principle.Finally,FEA simulation by Ansys Workbench is carried out to verify DOF,effectiveness of the dimension synthesis,and compliant model.Optimization of motion/force transfer characteristic is first applied for the design of compliant mechanisms to suppress drift of rotation axis in the paper.
基金This project is supported by National Natural Science Foundation of China (No. 50375051)Provincial Natural Science Foundation of Guangdong, China (No. 05006494)+2 种基金Guang-dong Province Technology Project, China (No. 2006A10401004)Guangzhou Municipal Technology Project, China (No. 053J208001)Teaching and Research Award Program for Outstanding Young Teacher in Higher Educa-tion Institutions of Ministry of Education of China
文摘An optimal topology design method for multiple inputs and multiple outputs compliant micro-manipulation system is presented. Firstly, the topology design problem is posed in terms of a multiple inputs load and several specified output deflections. The compliance and stiffness of the system are expressed by the mutual potential energy and strain energy, respectively, which can be controlled by a multi-critaria objective function. Secondly, based on the optimality criteria method, a model solution algorithm is presented. Finally, a numerical example is presented to show the validity oftbe presented technique. The optimal topology ofa 4 inputs and 4 outputs compliant mechanism is obtained by using the method, and the corresponding micro-positioning stage system is further designed.
基金Supported by Fundamental Research Funds for the Central Universities of China(Grant Nos.2014QNB18,2015XKMS022)National Natural Science Foundation of China(Grant No.51475456)+1 种基金Priority Academic Programme Development of Jiangsu Higher Education Institutionsthe Visiting Scholar Foundation of China Scholarship Council
文摘Based on a modified pseudo-rigid-body model,the frequency characteristics and sensitivity of the large-deformation compliant mechanism are studied.Firstly,the pseudo-rigid-body model under the static and kinetic conditions is modified to enable the modified pseudo-rigid-body model to be more suitable for the dynamic analysis of the compliant mechanism.Subsequently,based on the modified pseudo-rigid-body model,the dynamic equations of the ordinary compliant four-bar mechanism are established using the analytical mechanics.Finally,in combination with the finite element analysis software ANSYS,the frequency characteristics and sensitivity of the compliant mechanism are analyzed by taking the compliant parallel-guiding mechanism and the compliant bistable mechanism as examples.From the simulation results,the dynamic characteristics of compliant mechanism are relatively sensitive to the structure size,section parameter,and characteristic parameter of material on mechanisms.The results could provide great theoretical significance and application values for the structural optimization of compliant mechanisms,the improvement of their dynamic properties and the expansion of their application range.
基金supported by National Natural Science Foundation of China(Grant No.91223201)Guangdong Provincial Natural Science Foundation of China(Grant No.S2013030013355)+1 种基金Guangdong Provincial Universities and Colleges Pearl River Scholar Funded Scheme(2010)Fundamental Research Funds for the Central Universities,China(Grant No.2012ZP0004)
文摘There is seldom approach developed for the initial topology design of flexure-based compliant mechanisms. The most commonly-used approaches, which start with an existing rigid-body mechanism, do not consider the performances between different topologies. Moreover, they rely heavily on the rigid-body topology, therefore limit the diversity of compliant mechanisms topology. To obtain the optimal initial topology of such mechanisms directly from problem specifications without referencing to the existing mechanism topologies, a spring-joint method is presented for a restricted class of the serial passive flexure-based compliant mechanisms, which are the building blocks of parallel compliant mechanisms. The topology of the compliant mechanisms is represented by a serial spring-joint mechanism（SSJM） that is a traditional rigid-body mechanism with a torsional spring acting on each joint, and is described by position vectors of the spring-joints. A simplified compliance matrix, determined by the position vectors, is used to characterize the tip of the SSJM kinematically, and is optimized to ensure the desired freedoms of the compliant mechanisms during optimization. The topology optimization problem is formulated as finding out the optimal position of the spring-joints in a blank design domain with an objective function derived from the simplified compliance matrix. In design examples, syntheses of the compliant mechanisms with both single freedom and two decoupled freedoms are presented to illustrate the proposed method. The proposed method provides a new way for the initial design of flexure-based compliant mechanisms.
基金Supported by National Natural Science Foundation of Germany(SFB639),as subproject D2 in the Collaborative Research Center"Textile-Reinforced Composite Components in Function-Integrating Multi-Material Design for Complex Lightweight Applications"
文摘Compliant mechanisms have several advantages, especially smaller number of elements and therefore less movable joints. The flexural members furthermore allow an integration of special functions like balancing or locking. Especially fiber reinforced materials exhibit a wide range of function integration considering their compliance in passive as well active applications. To take advantage of compliant elements in applications a robust synthesis tool is needed. The synthesis based on topology optimization method or the pseudo rigid body approach leads to complex structures. Considering the use of fiber reinforced material a synthesis approach which leads to less complex structures is more suitable. For building up simple structures, with only one cantilever beam as compliant element（B） a graphical approach using the elastic similitude is the most efficient method. A step-by-step synthesis procedure is presented to synthesize compliant mechanisms with rotatory joints（R） and prismatic joints（P） to develop RRB/PRB- and RPB-linkages. Using the elastic similitude to implement these results into a graphical synthesis algorithm is the innovation part of this paper. It can be shown that this approach leads to a comfortable handling of beam elements during the synthesis, where the two free parameters can be directly coupled to scale and fix the orientation of the beam element. This advantage inherently shortens the development process. In giving an example the focus lies of the experimental approach, which also shows that the simple BERNOULLI beam model is valid and so the synthesis by using the elastic similitude. The method is presented and discussed by using an application for a cup holder mechanism made of fiber reinforced material.
文摘This paper presents an in-depth study of Equivalent beam model (EBM).Firstly three-dimensional (3D) finite element analysis (FEA) model for circular flexure hinge developed by Zettl et al.was verified by the comparison with Smith's experimental results and the 3D FEA model was feasible within 5.5% error.Then the accuracy of Timoshenko short-beam due to shear force was verified based on finite element method.The results showed that the EBM has good accuracy within 5% error for 1≤r/t≤3.Finally the EBM methodology was applied for the simulation optimal design of a bridge-type compliant mechanism.The results showed that the EBM methodology has very high numerical efficiency and satisfactory accuracy for simulation optimal design of planar compliant mechanism with flexure hinges.
基金Supported by Key Project of Hubei Provincial Department of Education Research Program(Grant No.D20211401).
文摘Reducing the peak actuating force(PAF)and parasitic displacement is of high significance for improving the performance of compliant parallel mechanisms(CPMs).In this study,a 2-DOF 4-4R compliant parallel pointing mechanism(4-4R CPPM)was used as the object,and the actuating force of the mechanism was optimized through redundant actuation.This was aimed at minimizing the PAF and parasitic displacement.First,a kinetostatic model of the redundantly actuated 4-4R CPPM was established to reveal the relationship between the input forces/displacements and the output displacements of the mobile platform.Subsequently,based on the established kinetostatic model,methods for optimizing the actuating force distribution with the aim of minimizing the PAF and parasitic displacement were introduced successively.Second,a simulated example of a mobile platform’s spatial pointing trajectory validated the accuracy of the kinetostatic model.The results show a less than 0.9%relative error between the analytical and finite element(FE)results,and the high consistency indicates the accuracy of the kinetostatic model.Then,the effectiveness of the method in minimizing the PAF and parasitic displacement was validated using two simulated examples.The results indicate that compared with the non-redundant actuation case,the PAF of the mechanism could be reduced by up to 50%,and the parasitic displacement was reduced by approximately three-four orders of magnitude by means of redundant actuation combined with the optimal distribution of the actuating force.As expected,with the reduction in parasitic displacement,the FE-results of the output angular displacements(θ_(x) andθ_(z))of the mobile platform were closer to the target oscillation trajectory.This further verified that the reduction in parasitic displacement is indeed effective in improving the motion accuracy of the mechanism.The advantage of this proposed method is that it reduces the PAF and parasitic displacement from the perspective of the actuating force control strategy,without the requirement of structural changes to the original mechanism.
