Complicated changns occur inside the steel parts during quenching process. The abruptly changed boundary conditions make the temperature field,micro - structure and stress field change dramatically in very short ti...Complicated changns occur inside the steel parts during quenching process. The abruptly changed boundary conditions make the temperature field,micro - structure and stress field change dramatically in very short time, and these variables take a contact interactions in the whole process. In this paper, a three dimensional non - linear mathematical model for queeching process has been founded and the numerical simulation on temperature field,microstructre and stress field has been realized.In the FEM analysis, the incremental iteration method is used to deal with such complicated nonlinear as boundary nonlinear, physical property nonlinear,transformation nonlinear etc.The effect of stress on transformation kinetics has been considered in the calculation of microstructure. In the stress field anal- ysis,a thermo- elasto - plastic model has been founded, which considers such factors as transforma- tion strain,transformation plastic strain, themal strain and the effect of temperature and transforma- tion on mechanical propertier etc. The transient temperature field, microstructure distribution and stress field of the roller on any time can be displayed vividly,and the cooling curve and the changes of stress on any position can also be given.展开更多
In this study, the spatial distributions of stress and fracture fields for three typical underground coal mining layouts, Le, non-pillar mining （NM）, top-coal caving mining （TCM） and protective coal-seam mining （...In this study, the spatial distributions of stress and fracture fields for three typical underground coal mining layouts, Le, non-pillar mining （NM）, top-coal caving mining （TCM） and protective coal-seam mining （PCM）, are modeled using discrete element software UDEC, The numerical results show that different mining layouts can lead to different mining-induced stress fields, resulting in diverse fracture fields, For the PCM, the mining influenced area in front of the mining faces is the largest, and the stress concentration factor in front of the mining faces is the lowest, The spatial shapes of the mining-induced fracture fields under NM, TCM and PCM differ, and they are characterized by trapezoidal, triangular and tower shapes, respectively, The fractal dimensions of mining-induced fractures of the three mining layouts decrease in the order of PCM, TCM and NM, It is also shown that the PCM can result in a better gas control effect in coal mines with high outburst potential, The numerical results are expected to provide a basis for understanding of mining-induced gas seepage fields and provide a reference for high- efficiency coal mining,展开更多
To decrease thermal stress during laser metal deposition shaping(LMDS)process,it is of great importance to learn the transient thermal stress distribution regularities.Based on the“element life and death”technique o...To decrease thermal stress during laser metal deposition shaping(LMDS)process,it is of great importance to learn the transient thermal stress distribution regularities.Based on the“element life and death”technique of finite element analy- sis(FEA),a three-dimensional multi-track and multi-layer numerical simulation model for LMDS is developed with ANSYS parametric design language(APDL)for the first time,in which long-edge parallel reciprocating scanning paths is introduced. Through the model,detailed simulations of thermal stress during whole metal cladding process are conducted,the generation and distribution regularities of thermal stress are also discussed in detail.Using the same process parameters,the simulation results show good agreement with the features of samples which fabricated by LMDS.展开更多
We adopt the concept of generalized plane strain to model a roadway in a stress field.This can avoid limitations caused by simplifying the stress analysis as plane strain.FLAC^(3D)was used to investigate the maximum t...We adopt the concept of generalized plane strain to model a roadway in a stress field.This can avoid limitations caused by simplifying the stress analysis as plane strain.FLAC^(3D)was used to investigate the maximum tensile stress and displacement of a roadway in a known stress field for angles,α,between the roadway axial direction and the maximum principal stress of 0°,30°,45°,60°and 90°.This theory was applied to the analysis of an engineering case.The results indicate that stress and displacement of the surrounding rock increase as the angle,α,increases.This provides some significant guidance for a reasonable layout of roadways in a known stress field.展开更多
A numerical method is presented that simulates 3D explosive field problems. A code MMIC3D using this method can be used to simulate the propagation and reflected effects of all kinds of rigid boundaries to shock waves...A numerical method is presented that simulates 3D explosive field problems. A code MMIC3D using this method can be used to simulate the propagation and reflected effects of all kinds of rigid boundaries to shock waves produced by an explosive source. These numerical results indicate that the code MMIC3D has the ability in computing cases such as 3D shock waves produced by air explosion, vortex region of the shock wave, the Mach wave, and reflected waves behind rigid boundaries.展开更多
A local thermal stress model of water-cooled-wall pulverized-coal gasifier was built, and ANSYS was used to simulate the stress field in the gasifier operation to research the damage of refractories and slag layer cau...A local thermal stress model of water-cooled-wall pulverized-coal gasifier was built, and ANSYS was used to simulate the stress field in the gasifier operation to research the damage of refractories and slag layer caused by the thermal stress. The results reveal that:（1） the maximum stress of water-cooled-wall gasifier appears at the interface between anchor nails and refractories as well as the interface between refractories and the slag layer, and the maximum stress of slag layer appears on the surface of the slag layer;（2） the increase of slag layer thickness can significantly reduce the thermal stress at the interface between anchor nails and refractories, but increase the thermal stress between slag layer and refractories;（3） when the therma I conductivity is 2-6 W · m-1 · K-1, the thermal stress increases rapidly with the increase of the thermal conductivity, but when the thermal conductivity is 6-10 W · m-1 · K-1, the thermal stress is basically stable;（4） the higher the cooling rate, the faster the decreasing speed of the temperature and thermal stress.展开更多
The mathematical models have been established to describe the temperature and stress profiles in T16A14V cylinder during quenching. The residual stress and deformation of the workpiece can be predicted precisely based...The mathematical models have been established to describe the temperature and stress profiles in T16A14V cylinder during quenching. The residual stress and deformation of the workpiece can be predicted precisely based on ANSYS software. The simulated results show that the temperature of the divided element decreases faster at the edge than that at the internal of the workpiece during quenching from 1050 to 20°C. The largest temperature difference and dimension change in diameter are about 90°C and -0.935%, respectively. The position of largest tensile stress occurs around the edge of the cylinder.展开更多
Natural fractures,like tectoclases,are essential in the formation of shale gas reservoirs and have been the focus of study for shale gas development.Tectoclases provide most storage space for gas and are largely contr...Natural fractures,like tectoclases,are essential in the formation of shale gas reservoirs and have been the focus of study for shale gas development.Tectoclases provide most storage space for gas and are largely controlled by the paleo-tectonic stress field in shale reservoirs of the Niutitang Formation,northern Guizhou area,China.An accurate prediction of the development and distribution of tectoclases in the reservoirs is of great significance to exploring and developing shale gas sweet spots in the area.Based on geological structure evolution and fracture characterization,this study is focused on factors that control the fracture development in the Niutitang Formation shale reservoirs in northern Guizhou through characterization and modeling of geomechanisms and tectonic movements.A geomechanical model is formulated for the shale reservoirs against the geological background of the area.On this basis,the fractures are predicted by using the acoustic emission data.Numerical simulation results show that the development and distribution of tectoclase is controlled by fault zones,some of which have no obvious turning points with tectoclase in the middle sections being more developed and fragmented than those at the two ends.Some of these have obvious S-shaped turning points where tectoclases are the most developed and fragmented.展开更多
Based on the study about the geological background of Beiya Gold Deposit, numerical simulation was conducted about the three-dimensional structural stress field for Beiya Gold Deposit by applying finite element theory...Based on the study about the geological background of Beiya Gold Deposit, numerical simulation was conducted about the three-dimensional structural stress field for Beiya Gold Deposit by applying finite element theory and by employing a linear elasticity model. Results of the simulation indicate that the Beiya syncline is a faulted basin, and a hidden fracture occurs in the west wing of the syncline.Under the action of the EW-trending compressive force, four nearly NS-trending fractures (groups) were generated in the stress stretching areas of the two wings of the syncline, and these fractures constitute favorable tectonic positions for the upward intrusion of porphyry magma and the occurrence of Au-Pb-Zn polymetallic deposits.展开更多
Taking cruciform welded joints under different corrosion degrees, together with 45° inclined angle and full penetration load-carrying fillet, as the research object, the stress intensity factor of a quarter-circu...Taking cruciform welded joints under different corrosion degrees, together with 45° inclined angle and full penetration load-carrying fillet, as the research object, the stress intensity factor of a quarter-circular comer crack of welded joints is calculated based on FRANC3D with ABAQUS. Effects of different corrosion pit sizes, crack aspect ratios, and crack depths on stress intensity factor are analyzed. The results show that pit depth plays a major role in stress intensity factor, while the effect of pit radius is relatively small. The cracking modes of the surface and the deepest point are mode I, and mixed modes I and II, respectively. Effects of pit depths, crack aspect ratios, and crack depths on the stress intensity factor at the surface point are greater than at the deepest point.展开更多
Study on tectonic fractures based on the inversion of tectonic stress fields is an effective method. In this study, a geological model was set up based on geological data from the Hudi Coal Mine, Qinshui Basin, a mech...Study on tectonic fractures based on the inversion of tectonic stress fields is an effective method. In this study, a geological model was set up based on geological data from the Hudi Coal Mine, Qinshui Basin, a mechanical model was established under the condition of rock mechanics and geostress, and the finite element method was used to simulate the paleotectonic stress field. Based on the Griffith and Mohr-Coulomb criterion, the distribution of tectonic fractures in the Shanxi Formation during the Indosinian, Yanshanian, and Himalayan period can be predicted with the index of comprehensive rupture rate. The results show that the acting force of the Pacific Plate and the India Plate to the North China Plate formed the direction of principal stress is N-S, NW - SE, and NE - SW, respectively, in different periods in the study area. Changes in the direction and strength of the acting force led to the regional gradients of tectonic stress magnitude, which resulted in an asymmetrical distribution state of the stress conditions in different periods. It is suggested that the low-stress areas are mainly located in the fault zones and extend along the direction of the fault zones. Furthermore, the high-stress areas are located in the junction of fold belts and the binding site of multiple folds. The development of tectonic fractures was affected by the distribution of stress intensity and the tectonic position of folds and faults, which resulted in some developed areas with level I and II. There are obvious differences in the development of tectonic fractures in the fold and fault zones and the anticline and syncline structure at the same fold zones. The tectonic fractures of the Shanxi Formation during the Himalayan period are more developed than those during the Indosinian and Yanshanian period due to the superposition of the late tectonic movement to the early tectonic movement and the differences in the magnitude and direction of stress intensity.展开更多
Crustal stresses play an important role in both exploration and development in the oil and gas industry.However,it is difficult to simulate crustal stress distributions accurately,because of the incompatibilities that...Crustal stresses play an important role in both exploration and development in the oil and gas industry.However,it is difficult to simulate crustal stress distributions accurately,because of the incompatibilities that exist among different software.Here,a series of algorithms is developed and integrated in the Petrel2ANSYS to carry out two-way conversions between the 3D attribute models that employ corner-point grids used in Petrel and the 3D finite-element grids used in ANSYS.Furthermore,a modified method of simulating stress characteristics and analyzing stress fields using the finite-element method and multiple finely resolved 3D models is proposed.Compared to the traditional finite-element simulation-based approach,which involves describing the heterogeneous within a rock body or sedimentary facies in detail and simulating the stress distribution,the single grid cell-based approach focuses on a greater degree on combining the rock mechanics described by 3D corner-point grid models with the finely resolved material characteristics of 3D finite-element models.Different models that use structured and unstructured grids are verified in Petrel2ANSYS to assess the feasibility.In addition,with minor modifications,platforms based on the present algorithms can be extended to other models to convert corner-point grids to the finite-element grids constructed by other software.展开更多
Simulation for stochastic wind field is very important in analyzing dynamic responses of large complex structures due to strong wind.The typical simulation method is the spectrum representation method (SRM),but the SR...Simulation for stochastic wind field is very important in analyzing dynamic responses of large complex structures due to strong wind.The typical simulation method is the spectrum representation method (SRM),but the SRM has drawbacks of inferior precision in lower frequency and slow calculating speed.In view of this,the modified Fourier spectrum method (MFSM) is introduced into the simulation of stochastic wind field in this paper.In this method,phase information of wind velocity time history is determined by cross power spectral density (CPSD) between adjacent points,and the wind velocity time history with time and space correlation is generated by iterative modification for CPSD considering auto power spectral density (APSD).Simulation of the wind field for a long-span bridge is undertaken to verify the effectiveness of the MFSM.Simulation results of the SRM and the MFSM are compared.It can be concluded that the MFSM is more accurate and has higher calculation speed than the SRM.展开更多
This paper made a numerical simulation to the basic tectonic stress field of Chinese mainland and its neighboringregion using the visco-elasticity finite element model and the new published displacement rate result. M...This paper made a numerical simulation to the basic tectonic stress field of Chinese mainland and its neighboringregion using the visco-elasticity finite element model and the new published displacement rate result. Main contents include the simulation of maximum shear stress and its varying rate, the maximum shear strain and its varyingrate, the shear strain energy density and its varying rate. In view of the high inhomogeneous distribution characterof seismicity in space and time in Chinese mainland and its neighboring area, the normalized background energyvalue was given by means of normalized treatment to the earthquake energy release in the eastern and westernparts of Chinese mainland. And the comparison of the simulation result with the actual seismicity was made. Thefesults show that the simulation values can explain well the earthquake distribution character of Chinese mainlandand its neighboring area.展开更多
This paper analyzed the characteristics of welding solidification crack of stainless steels,and clearly re- vealed the the of the deformation in the molten - the pool and the solidification shrinkage on the stress -...This paper analyzed the characteristics of welding solidification crack of stainless steels,and clearly re- vealed the the of the deformation in the molten - the pool and the solidification shrinkage on the stress - strain fields in the trail of molten - weld pool.Moreover, rheologic properties of the alloys in solid - liquid zone were also obtained by measuring the hading and unloading deform curves of the steels.As a result, a numerical model for simulation of stress - strain distributions of welding solidifi- cation crack was developed. On the basis of the model,the thesis simulated the driving force of solidifi- cation crack of stainless steels, that is, stress - strain fields in the trail of molten-weld pool with fi- nite element method.展开更多
The formation of shear bands in metallic glasses(MGs)was examined by tailoring localized complex stress fields(LCSFs).The findings have shown that the LCSFs in MGs can increase the localization of strained atoms and a...The formation of shear bands in metallic glasses(MGs)was examined by tailoring localized complex stress fields(LCSFs).The findings have shown that the LCSFs in MGs can increase the localization of strained atoms and accelerate the release of accumulated deformation energy for initiating a shear band in confined and thin-layered regions.The findings not only add more knowledge to the formation mechanisms of shear bands in MGs,but also provide possible rationale for the discrepancies in the mechanical properties of different-sized MGs.As compared with the bulk samples,the higher strength and larger elastic limits in nanoscaled MGs could be attributed to the elimination of stress-concentrators,which can serve as LCSFs.展开更多
A two-dimensional axisymmetric finite element model for stress distribution of billet in electromagnetic soft-contact continuous casting mould was established by a two-way coupled method.The contact state between soli...A two-dimensional axisymmetric finite element model for stress distribution of billet in electromagnetic soft-contact continuous casting mould was established by a two-way coupled method.The contact state between solidified shell and mould was described to simulate the thermal-mechanical behaviors in the soft-contact mould.And the effects of frequencies and currents on stress distribution of billet had been discussed and analyzed.The results show that the equivalent stress of initial solidification shell both at its outer and inner surface decreases but at the bottom the equivalent stress of two sides of shell both increases when the current intensity is 1600 A,and the frequency is 20 kHz,compared with the status of conventional continuous casting.展开更多
A system for the numerical simulation of 3D temperature and stress fields during casting process was studied, developed and practiced based on finite difference method (FDM) in this paper. An approach where the stress...A system for the numerical simulation of 3D temperature and stress fields during casting process was studied, developed and practiced based on finite difference method (FDM) in this paper. An approach where the stress/strain and the heat transfer analysis use the same computational domain was presented, which avoided transferring temperature data between FDM and FEM nodes and elements. A slot-board steel casting was simulated and the calculated results are in agreements with those obtained from practical producing.展开更多
Tsinghai-Tibet Plateau becomes an important research topic ofglobal tectonics, because of its marvelous thickness and rapiduplifting since Quaternary. By using finite element method, thenumerical simulation is carried...Tsinghai-Tibet Plateau becomes an important research topic ofglobal tectonics, because of its marvelous thickness and rapiduplifting since Quaternary. By using finite element method, thenumerical simulation is carried out for the movement of structurallithosphere. The deformable elements are employed to simulatestructural zones, and the frictional mechanism is introduced toillustrate the characteristic of a zone with a contact crack surface.The boundary conditions are prescribed by the displacements aroundthe pla- teau.展开更多
According to the latest data of geological structure, geophysics, in-situ stress measurement and focal mechanism,3-D tectonic stress field model in North China is built and 3-D tectonic stress field pattern of North C...According to the latest data of geological structure, geophysics, in-situ stress measurement and focal mechanism,3-D tectonic stress field model in North China is built and 3-D tectonic stress field pattern of North China aresimulated by finite element method. Then the overall characteristics and regional specific feature of North Chinaare studied. Finally, the influences of the valid dynamic boundary conditions of North China Block, active faultsand the inhomogeneity of crustal medium on tectonic stress field of North China are investigated.展开更多
文摘Complicated changns occur inside the steel parts during quenching process. The abruptly changed boundary conditions make the temperature field,micro - structure and stress field change dramatically in very short time, and these variables take a contact interactions in the whole process. In this paper, a three dimensional non - linear mathematical model for queeching process has been founded and the numerical simulation on temperature field,microstructre and stress field has been realized.In the FEM analysis, the incremental iteration method is used to deal with such complicated nonlinear as boundary nonlinear, physical property nonlinear,transformation nonlinear etc.The effect of stress on transformation kinetics has been considered in the calculation of microstructure. In the stress field anal- ysis,a thermo- elasto - plastic model has been founded, which considers such factors as transforma- tion strain,transformation plastic strain, themal strain and the effect of temperature and transforma- tion on mechanical propertier etc. The transient temperature field, microstructure distribution and stress field of the roller on any time can be displayed vividly,and the cooling curve and the changes of stress on any position can also be given.
基金financially supported by the State Key Research Development Program of China(Grant No.2016YFC0600701)the National Natural Science Foundation of China(Grant No.51674170)
文摘In this study, the spatial distributions of stress and fracture fields for three typical underground coal mining layouts, Le, non-pillar mining （NM）, top-coal caving mining （TCM） and protective coal-seam mining （PCM）, are modeled using discrete element software UDEC, The numerical results show that different mining layouts can lead to different mining-induced stress fields, resulting in diverse fracture fields, For the PCM, the mining influenced area in front of the mining faces is the largest, and the stress concentration factor in front of the mining faces is the lowest, The spatial shapes of the mining-induced fracture fields under NM, TCM and PCM differ, and they are characterized by trapezoidal, triangular and tower shapes, respectively, The fractal dimensions of mining-induced fractures of the three mining layouts decrease in the order of PCM, TCM and NM, It is also shown that the PCM can result in a better gas control effect in coal mines with high outburst potential, The numerical results are expected to provide a basis for understanding of mining-induced gas seepage fields and provide a reference for high- efficiency coal mining,
文摘To decrease thermal stress during laser metal deposition shaping(LMDS)process,it is of great importance to learn the transient thermal stress distribution regularities.Based on the“element life and death”technique of finite element analy- sis(FEA),a three-dimensional multi-track and multi-layer numerical simulation model for LMDS is developed with ANSYS parametric design language(APDL)for the first time,in which long-edge parallel reciprocating scanning paths is introduced. Through the model,detailed simulations of thermal stress during whole metal cladding process are conducted,the generation and distribution regularities of thermal stress are also discussed in detail.Using the same process parameters,the simulation results show good agreement with the features of samples which fabricated by LMDS.
基金supported by the National Basic Research Program of China(No.2010CB226805)the National Natural Science Foundation of China(Nos.50874103 and 50974115)+1 种基金the Natural Science Foundation of Jiangsu Province(No.KB2008135)the State Key Laboratory Fund(No.SKLGDUEK 0905)
文摘We adopt the concept of generalized plane strain to model a roadway in a stress field.This can avoid limitations caused by simplifying the stress analysis as plane strain.FLAC^(3D)was used to investigate the maximum tensile stress and displacement of a roadway in a known stress field for angles,α,between the roadway axial direction and the maximum principal stress of 0°,30°,45°,60°and 90°.This theory was applied to the analysis of an engineering case.The results indicate that stress and displacement of the surrounding rock increase as the angle,α,increases.This provides some significant guidance for a reasonable layout of roadways in a known stress field.
文摘A numerical method is presented that simulates 3D explosive field problems. A code MMIC3D using this method can be used to simulate the propagation and reflected effects of all kinds of rigid boundaries to shock waves produced by an explosive source. These numerical results indicate that the code MMIC3D has the ability in computing cases such as 3D shock waves produced by air explosion, vortex region of the shock wave, the Mach wave, and reflected waves behind rigid boundaries.
文摘A local thermal stress model of water-cooled-wall pulverized-coal gasifier was built, and ANSYS was used to simulate the stress field in the gasifier operation to research the damage of refractories and slag layer caused by the thermal stress. The results reveal that:（1） the maximum stress of water-cooled-wall gasifier appears at the interface between anchor nails and refractories as well as the interface between refractories and the slag layer, and the maximum stress of slag layer appears on the surface of the slag layer;（2） the increase of slag layer thickness can significantly reduce the thermal stress at the interface between anchor nails and refractories, but increase the thermal stress between slag layer and refractories;（3） when the therma I conductivity is 2-6 W · m-1 · K-1, the thermal stress increases rapidly with the increase of the thermal conductivity, but when the thermal conductivity is 6-10 W · m-1 · K-1, the thermal stress is basically stable;（4） the higher the cooling rate, the faster the decreasing speed of the temperature and thermal stress.
基金financial support from the key laboratory foundation of precision hot-forming for national defense science and tochnology
文摘The mathematical models have been established to describe the temperature and stress profiles in T16A14V cylinder during quenching. The residual stress and deformation of the workpiece can be predicted precisely based on ANSYS software. The simulated results show that the temperature of the divided element decreases faster at the edge than that at the internal of the workpiece during quenching from 1050 to 20°C. The largest temperature difference and dimension change in diameter are about 90°C and -0.935%, respectively. The position of largest tensile stress occurs around the edge of the cylinder.
基金We thank the Special Fund for Science and Technology of Water Resources Department of Guizhou Province(Project No.KT201804)Guizhou Science and Technology Fund(Project No.[2020]4Y046,Project No.[2019]1075,Project No.[2018]1107)the National Natural Science Foundation of China(Project Nos.51964007 and 51774101)and the Scientific Research Project of Guiyang Rail Transit Line 2 Phase I Project(Project No.D2(I)e FW-YJ-2019-001-gs4WT)for their support.This study is also funded by Teaching reform project of Guizhou University(Project No.JG 201990).
文摘Natural fractures,like tectoclases,are essential in the formation of shale gas reservoirs and have been the focus of study for shale gas development.Tectoclases provide most storage space for gas and are largely controlled by the paleo-tectonic stress field in shale reservoirs of the Niutitang Formation,northern Guizhou area,China.An accurate prediction of the development and distribution of tectoclases in the reservoirs is of great significance to exploring and developing shale gas sweet spots in the area.Based on geological structure evolution and fracture characterization,this study is focused on factors that control the fracture development in the Niutitang Formation shale reservoirs in northern Guizhou through characterization and modeling of geomechanisms and tectonic movements.A geomechanical model is formulated for the shale reservoirs against the geological background of the area.On this basis,the fractures are predicted by using the acoustic emission data.Numerical simulation results show that the development and distribution of tectoclase is controlled by fault zones,some of which have no obvious turning points with tectoclase in the middle sections being more developed and fragmented than those at the two ends.Some of these have obvious S-shaped turning points where tectoclases are the most developed and fragmented.
文摘Based on the study about the geological background of Beiya Gold Deposit, numerical simulation was conducted about the three-dimensional structural stress field for Beiya Gold Deposit by applying finite element theory and by employing a linear elasticity model. Results of the simulation indicate that the Beiya syncline is a faulted basin, and a hidden fracture occurs in the west wing of the syncline.Under the action of the EW-trending compressive force, four nearly NS-trending fractures (groups) were generated in the stress stretching areas of the two wings of the syncline, and these fractures constitute favorable tectonic positions for the upward intrusion of porphyry magma and the occurrence of Au-Pb-Zn polymetallic deposits.
基金supported by the National Natural Science Foundation of China(51378430 and 51378431)
文摘Taking cruciform welded joints under different corrosion degrees, together with 45° inclined angle and full penetration load-carrying fillet, as the research object, the stress intensity factor of a quarter-circular comer crack of welded joints is calculated based on FRANC3D with ABAQUS. Effects of different corrosion pit sizes, crack aspect ratios, and crack depths on stress intensity factor are analyzed. The results show that pit depth plays a major role in stress intensity factor, while the effect of pit radius is relatively small. The cracking modes of the surface and the deepest point are mode I, and mixed modes I and II, respectively. Effects of pit depths, crack aspect ratios, and crack depths on the stress intensity factor at the surface point are greater than at the deepest point.
基金financially supported by the National Natural Science Foundation of China (Nos.41402138, 41330635, and 41272154)Key Laboratory of Coal-based CO2 Capture and Geological Storage, Jiangsu Province (China University of Mining and Technology) (No.2016B04)
文摘Study on tectonic fractures based on the inversion of tectonic stress fields is an effective method. In this study, a geological model was set up based on geological data from the Hudi Coal Mine, Qinshui Basin, a mechanical model was established under the condition of rock mechanics and geostress, and the finite element method was used to simulate the paleotectonic stress field. Based on the Griffith and Mohr-Coulomb criterion, the distribution of tectonic fractures in the Shanxi Formation during the Indosinian, Yanshanian, and Himalayan period can be predicted with the index of comprehensive rupture rate. The results show that the acting force of the Pacific Plate and the India Plate to the North China Plate formed the direction of principal stress is N-S, NW - SE, and NE - SW, respectively, in different periods in the study area. Changes in the direction and strength of the acting force led to the regional gradients of tectonic stress magnitude, which resulted in an asymmetrical distribution state of the stress conditions in different periods. It is suggested that the low-stress areas are mainly located in the fault zones and extend along the direction of the fault zones. Furthermore, the high-stress areas are located in the junction of fold belts and the binding site of multiple folds. The development of tectonic fractures was affected by the distribution of stress intensity and the tectonic position of folds and faults, which resulted in some developed areas with level I and II. There are obvious differences in the development of tectonic fractures in the fold and fault zones and the anticline and syncline structure at the same fold zones. The tectonic fractures of the Shanxi Formation during the Himalayan period are more developed than those during the Indosinian and Yanshanian period due to the superposition of the late tectonic movement to the early tectonic movement and the differences in the magnitude and direction of stress intensity.
基金Project(2017ZX05013002-002)supported by Major National Science and Technology Projects of ChinaProject(RIPED-2016-JS-276)supported by Petro-China Research Institute of Petroleum Exploration and Development
文摘Crustal stresses play an important role in both exploration and development in the oil and gas industry.However,it is difficult to simulate crustal stress distributions accurately,because of the incompatibilities that exist among different software.Here,a series of algorithms is developed and integrated in the Petrel2ANSYS to carry out two-way conversions between the 3D attribute models that employ corner-point grids used in Petrel and the 3D finite-element grids used in ANSYS.Furthermore,a modified method of simulating stress characteristics and analyzing stress fields using the finite-element method and multiple finely resolved 3D models is proposed.Compared to the traditional finite-element simulation-based approach,which involves describing the heterogeneous within a rock body or sedimentary facies in detail and simulating the stress distribution,the single grid cell-based approach focuses on a greater degree on combining the rock mechanics described by 3D corner-point grid models with the finely resolved material characteristics of 3D finite-element models.Different models that use structured and unstructured grids are verified in Petrel2ANSYS to assess the feasibility.In addition,with minor modifications,platforms based on the present algorithms can be extended to other models to convert corner-point grids to the finite-element grids constructed by other software.
基金Project supported by the National Natural Science Foundation of China (No.90915004)the Six Talents Peak in Jiangsu Province(No.2008178)the 333 High-Level Talent Training Project of Jiangsu Province,China
文摘Simulation for stochastic wind field is very important in analyzing dynamic responses of large complex structures due to strong wind.The typical simulation method is the spectrum representation method (SRM),but the SRM has drawbacks of inferior precision in lower frequency and slow calculating speed.In view of this,the modified Fourier spectrum method (MFSM) is introduced into the simulation of stochastic wind field in this paper.In this method,phase information of wind velocity time history is determined by cross power spectral density (CPSD) between adjacent points,and the wind velocity time history with time and space correlation is generated by iterative modification for CPSD considering auto power spectral density (APSD).Simulation of the wind field for a long-span bridge is undertaken to verify the effectiveness of the MFSM.Simulation results of the SRM and the MFSM are compared.It can be concluded that the MFSM is more accurate and has higher calculation speed than the SRM.
文摘This paper made a numerical simulation to the basic tectonic stress field of Chinese mainland and its neighboringregion using the visco-elasticity finite element model and the new published displacement rate result. Main contents include the simulation of maximum shear stress and its varying rate, the maximum shear strain and its varyingrate, the shear strain energy density and its varying rate. In view of the high inhomogeneous distribution characterof seismicity in space and time in Chinese mainland and its neighboring area, the normalized background energyvalue was given by means of normalized treatment to the earthquake energy release in the eastern and westernparts of Chinese mainland. And the comparison of the simulation result with the actual seismicity was made. Thefesults show that the simulation values can explain well the earthquake distribution character of Chinese mainlandand its neighboring area.
文摘This paper analyzed the characteristics of welding solidification crack of stainless steels,and clearly re- vealed the the of the deformation in the molten - the pool and the solidification shrinkage on the stress - strain fields in the trail of molten - weld pool.Moreover, rheologic properties of the alloys in solid - liquid zone were also obtained by measuring the hading and unloading deform curves of the steels.As a result, a numerical model for simulation of stress - strain distributions of welding solidifi- cation crack was developed. On the basis of the model,the thesis simulated the driving force of solidifi- cation crack of stainless steels, that is, stress - strain fields in the trail of molten-weld pool with fi- nite element method.
基金financially supported by the National Natural Science Foundation of China(Nos.51801049 and 51801174)the State Key Laboratory of Metastable Materials Science and Technology,Yanshan University(No.201809)the Fundamental Research Funds for the Central Universities of China(Nos.PA2019GDZC0096 and JD2019JGPY0015)。
文摘The formation of shear bands in metallic glasses(MGs)was examined by tailoring localized complex stress fields(LCSFs).The findings have shown that the LCSFs in MGs can increase the localization of strained atoms and accelerate the release of accumulated deformation energy for initiating a shear band in confined and thin-layered regions.The findings not only add more knowledge to the formation mechanisms of shear bands in MGs,but also provide possible rationale for the discrepancies in the mechanical properties of different-sized MGs.As compared with the bulk samples,the higher strength and larger elastic limits in nanoscaled MGs could be attributed to the elimination of stress-concentrators,which can serve as LCSFs.
基金Item Sponsored by National Natural Science Foundation of China[No.50834009]Key Grant Project of China Ministry of Education (No.311014)
文摘A two-dimensional axisymmetric finite element model for stress distribution of billet in electromagnetic soft-contact continuous casting mould was established by a two-way coupled method.The contact state between solidified shell and mould was described to simulate the thermal-mechanical behaviors in the soft-contact mould.And the effects of frequencies and currents on stress distribution of billet had been discussed and analyzed.The results show that the equivalent stress of initial solidification shell both at its outer and inner surface decreases but at the bottom the equivalent stress of two sides of shell both increases when the current intensity is 1600 A,and the frequency is 20 kHz,compared with the status of conventional continuous casting.
文摘A system for the numerical simulation of 3D temperature and stress fields during casting process was studied, developed and practiced based on finite difference method (FDM) in this paper. An approach where the stress/strain and the heat transfer analysis use the same computational domain was presented, which avoided transferring temperature data between FDM and FEM nodes and elements. A slot-board steel casting was simulated and the calculated results are in agreements with those obtained from practical producing.
文摘Tsinghai-Tibet Plateau becomes an important research topic ofglobal tectonics, because of its marvelous thickness and rapiduplifting since Quaternary. By using finite element method, thenumerical simulation is carried out for the movement of structurallithosphere. The deformable elements are employed to simulatestructural zones, and the frictional mechanism is introduced toillustrate the characteristic of a zone with a contact crack surface.The boundary conditions are prescribed by the displacements aroundthe pla- teau.
文摘According to the latest data of geological structure, geophysics, in-situ stress measurement and focal mechanism,3-D tectonic stress field model in North China is built and 3-D tectonic stress field pattern of North China aresimulated by finite element method. Then the overall characteristics and regional specific feature of North Chinaare studied. Finally, the influences of the valid dynamic boundary conditions of North China Block, active faultsand the inhomogeneity of crustal medium on tectonic stress field of North China are investigated.
