In this investigation,the structural and electrical properties of nanocomposites of polyaniline(PANI) and cobalt ferrite synthesized by hydrothermal route are reported for the first time(with weight ratios of CoFe_2O_...In this investigation,the structural and electrical properties of nanocomposites of polyaniline(PANI) and cobalt ferrite synthesized by hydrothermal route are reported for the first time(with weight ratios of CoFe_2O_4/PANI 1:2 and 2:1).Synthesized nanomaterials have been characterized by XRD,FT-IR,SEM and TEM techniques.FT-IR results confirm the presence of CoFe_2O_4 and PANI in the samples.Their detailed conductivity measurements have been investigated.It has been found that PANI has a more effective conducting mechanism in CoFe_2O_4-PANI composites.These results are also consistent with the change in AC conductivity orders in composites.展开更多
The Co/CoFe2O4 multilayers have been grown on the glass substrate using sputtering techniques. In these films the Co layers were measured to have the fcc structure with [11] axis perpendicular to the film plane, and t...The Co/CoFe2O4 multilayers have been grown on the glass substrate using sputtering techniques. In these films the Co layers were measured to have the fcc structure with [11] axis perpendicular to the film plane, and the CoFe2O4 layers are amorphous. Ferromagnetic resonance measurements have been made as a function of the external magnetic field orientation in a plane perpendicular to the film. The effective magnetization, effective anisotropy constant and interface anisotropy constant have been determined. The influence of Co layers thickness on magnetic properties was discussed.展开更多
CoFe_(2)O_(4)has been widely used for electromagnetic wave absorption owing to its high Snoek limit,high anisotropy,and suitable saturation magnetization;however,its inherent shortcomings,including low dielectric loss...CoFe_(2)O_(4)has been widely used for electromagnetic wave absorption owing to its high Snoek limit,high anisotropy,and suitable saturation magnetization;however,its inherent shortcomings,including low dielectric loss,high density,and magnetic agglomeration,limit its application as an ideal absorbent.This study investigated a microstructure regulation strategy to mitigate the inherent disadvantages of pristine CoFe_(2)O_(4)synthesized via a sol–gel auto-combustion method.A series of CoFe_(2)O_(4)foams(S0.5,S1.0,and S1.5,corresponding to foams with citric acid(CA)-to-Fe(NO_(3))_(3)·9H_(2)O molar ratios of 0.5,1.0,and 1.5,respectively)with two-dimensional(2D)curved surfaces were obtained through the adjustment of CA-to-Fe^(3+)ratio,and the electromagnetic parameters were adjusted through morphology regulation.Owing to the appropriate impedance matching and conductance loss provided by moderate complex permittivity,the effective absorption bandwidth(EAB)of S0.5 was as high as 7.3 GHz,exceeding those of most CoFe_(2)O_(4)-based absorbents.Moreover,the EAB of S1.5 reached 5.0 GHz(8.9–13.9 GHz),covering most of the X band,owing to the intense polarization provided by lattice defects and the heterogeneous interface.The three-dimensional(3D)foam structure circumvented the high density and magnetic agglomeration issues of CoFe_(2)O_(4)nanoparticles,and the good conductivity of 2D curved surfaces could effectively elevate the complex permittivity to ameliorate the dielectric loss of pure CoFe_(2)O_(4).This study provides a novel idea for the theoretical design and practical production of lightweight and broadband pure ferrites.展开更多
Layer structured LaPO_4 was added to Al_2O_3 ceramic matrix to improve the machinability of the composites. Microstructures of the Al_2O_3/LaPO_4 ceramic composites were studied at various sintering temperatures (1450...Layer structured LaPO_4 was added to Al_2O_3 ceramic matrix to improve the machinability of the composites. Microstructures of the Al_2O_3/LaPO_4 ceramic composites were studied at various sintering temperatures (1450, 1520, 1580, 1700 ℃) and different LaPO_4 contents (pure Al_2O_3, 30% LaPO_4, 50% LaPO_4, 70% LaPO_4, pure LaPO_4). Microstructures of the Al_2O_3/LaPO_4 composites are largely dependent on the LaPO_4 content and sintering temperature. X-ray diffraction analysis shows that LaPO_4 phase would not exist in the Al_2O_3/LaPO_4 composites when sintered above 1700 ℃.展开更多
In the present study,Ti-Zr-Cu-Ni amorphous filler metal was used to braze MgAl_(2)O_(4)ceramic and Ti-6Al-4V(TC4)at 875,900,925,950,975 and 1000℃for 10 min.The effects of brazing temperature on interfacial microstruc...In the present study,Ti-Zr-Cu-Ni amorphous filler metal was used to braze MgAl_(2)O_(4)ceramic and Ti-6Al-4V(TC4)at 875,900,925,950,975 and 1000℃for 10 min.The effects of brazing temperature on interfacial microstructure and mechanical properties of the joints were analyzed.The results showed that typical microstructure of the TC4/MgAl_(2)O_(4)joint was solid solution(SS)α-Ti,acicularα-Ti+(Ti,Zr)_(2)(Ni,Cu)layer,metallic glasses and TiO.With the increase in brazing temperature,(Ti,Zr)_(2)(Ni,Cu)layer gradually dispersed at bonding interface,a continuous layer of TiO appears near MgAl_(2)O_(4)ceramic.With the increase in brazing temperature,the hard and brittle(Ti,Zr)_(2)(Ni,Cu)layer gradually dispersed,resulting in the maximum shear strength of 39.5 MPa.The high-resolution TEM revealed the presence of amorphous structure,which is composed of Ti,Zr,Cu,Ni and Al.The values ofδandΔH_(mix)are calculated to be about 8%and−39.82 kJ/mol for the amorphous phase.展开更多
This work aims at solving the problems of difficult dispersion,easy oxidation and high cost of nano carbon during application,carbon/magnesium aluminate spinel(C/MgAl_(2)O_(4))composite powders were prepared using MgC...This work aims at solving the problems of difficult dispersion,easy oxidation and high cost of nano carbon during application,carbon/magnesium aluminate spinel(C/MgAl_(2)O_(4))composite powders were prepared using MgC2O4·2H2O,MgO2,Al2O3 powder,and Al powder as raw materials by combustion synthesis.The results indicate that with the maximum MgC2O4·2H2O addition of 33.34 mass%,the prepared powder contains 1.17 mass%of carbon and carbon distributes among spinel grains.The MgAl_(2)O_(4)spinel shows both granular and rod-like morphologies.The granular MgAl_(2)O_(4)spinel is generated from mutual diffusion between MgO and Al2O3;while the rod-like MgAl_(2)O_(4)spinel is mainly formed by the vapor-solid growth mechanism from Mg vapor and Al2O3.展开更多
The excessive use of pesticides has exacerbated environmental pollution due to herbicide residues,while their persistent toxicity poses serious challenges to global ecological security.A magnetically recyclable CoFe_(...The excessive use of pesticides has exacerbated environmental pollution due to herbicide residues,while their persistent toxicity poses serious challenges to global ecological security.A magnetically recyclable CoFe_(2)O_(4)/BiOBr S-scheme heterojunctions was prepared by microwave-assisted co-precipitation method for photocatalytic degradation of Diuron(DUR) in water.The formation of S-scheme heterojunction enhances electron transfer and charge separation,which was demonstrated by free radical trapping,electrochemical experiments,and DFT calculations.The magnetic CoFe_(2)O_(4)/BiOBr catalysts can achieve 99.9 %removal of diuron in 50 min under visible light irradiation.Furthermore,the system maintains stable performance across a broad p H range(3-9),enabling adaptation to diverse water environments,effective elimination of multiple pollutants,and strong resistance to ionic interference.Using magnetic recovery,CoFe_(2)O_(4)/BiOBr exhibits a high removal rate of 99 % and a markedly low ion leaching rate(<20 μg/L) after six cycles photocatalytic process,confirming its excellent stability and durability.According to HPLCQTOF-MS and DFT calculation,the main ways of DUR degradation include dechlorinated hydroxylation,dealkylation and hydroxylation of aromatic ring and side chain.Toxicity analysis showed that the toxicity of the intermediates generated during degradation was generally lower than that of DUR.The magnetic CoFe_(2)O_(4)/BiOBr S-scheme heterojunction developed in this study exhibits excellent photocatalytic performance,high applicability,good stability,and durability,providing an effective magnetic for the removal of refractory pollutants.展开更多
icrostructure and mechanical properties of Al_4C_3 and Al_2O_3 dispersion strengthened aluminum composite fabricated by mechanical attrition and hotpressing consolidation method were studied. It was shown that fine we...icrostructure and mechanical properties of Al_4C_3 and Al_2O_3 dispersion strengthened aluminum composite fabricated by mechanical attrition and hotpressing consolidation method were studied. It was shown that fine well developed Al_4C_3 stick and equiaxed γAl_2O_3 dispersoids with total content of about 6.6 v% uniformly distributed within the Al grains or along the grain boundaries. The Al/Al_4C_3 and Al/Al_2O_3 interfaces are very clean and well bonded at atomic level, but have no fixed orientation relationships between the dispersoids and the aluminum matrix exists. At ambient and especially elevated temperatures, strength and stiffness of the composite are much higher than that of P/M Al and even better than that of the 15 v% SiCw/Al composite.展开更多
Electromagnetic interference,which necessitates the rapid advancement of substances with exceptional capabilities for bsorbing electromagnetic waves,is of urgent concern in contemporary society.In this work,CoFe_(2)O_...Electromagnetic interference,which necessitates the rapid advancement of substances with exceptional capabilities for bsorbing electromagnetic waves,is of urgent concern in contemporary society.In this work,CoFe_(2)O_(4)/residual carbon from coal gasification fine slag(CFO/RC)composites were created using a novel hydrothermal method.Various mechanisms for microwave absorption,including conductive loss,natural resonance,interfacial dipole polarization,and magnetic flux loss,are involved in these composites.Consequently,compared with pure residual carbon materials,this composite offers superior capabilities in microwave absorption.At 7.76GHz,the CFO/RC-2 composite achieves an impressive minimum reflection loss(RL_(min))of-43.99 dB with a thickness of 2.44 mm.Moreover,CFO/RC-3 demonstrates an effective absorption bandwidth(EAB)of up to 4.16 GHz,accompanied by a thickness of 1.18mm.This study revealed the remarkable capability of the composite to diminish electromagnetic waves,providing a new generation method for microwave absorbing materials of superior quality.展开更多
基金the Fatih University,Research Project Foundation (Contract No.P50020902-2)TUBITAK (Contract No.110T487) for financial support of this study
文摘In this investigation,the structural and electrical properties of nanocomposites of polyaniline(PANI) and cobalt ferrite synthesized by hydrothermal route are reported for the first time(with weight ratios of CoFe_2O_4/PANI 1:2 and 2:1).Synthesized nanomaterials have been characterized by XRD,FT-IR,SEM and TEM techniques.FT-IR results confirm the presence of CoFe_2O_4 and PANI in the samples.Their detailed conductivity measurements have been investigated.It has been found that PANI has a more effective conducting mechanism in CoFe_2O_4-PANI composites.These results are also consistent with the change in AC conductivity orders in composites.
文摘The Co/CoFe2O4 multilayers have been grown on the glass substrate using sputtering techniques. In these films the Co layers were measured to have the fcc structure with [11] axis perpendicular to the film plane, and the CoFe2O4 layers are amorphous. Ferromagnetic resonance measurements have been made as a function of the external magnetic field orientation in a plane perpendicular to the film. The effective magnetization, effective anisotropy constant and interface anisotropy constant have been determined. The influence of Co layers thickness on magnetic properties was discussed.
基金supported by the National Natural Science Foundation of China (Nos.22004106 and 51872238)。
文摘CoFe_(2)O_(4)has been widely used for electromagnetic wave absorption owing to its high Snoek limit,high anisotropy,and suitable saturation magnetization;however,its inherent shortcomings,including low dielectric loss,high density,and magnetic agglomeration,limit its application as an ideal absorbent.This study investigated a microstructure regulation strategy to mitigate the inherent disadvantages of pristine CoFe_(2)O_(4)synthesized via a sol–gel auto-combustion method.A series of CoFe_(2)O_(4)foams(S0.5,S1.0,and S1.5,corresponding to foams with citric acid(CA)-to-Fe(NO_(3))_(3)·9H_(2)O molar ratios of 0.5,1.0,and 1.5,respectively)with two-dimensional(2D)curved surfaces were obtained through the adjustment of CA-to-Fe^(3+)ratio,and the electromagnetic parameters were adjusted through morphology regulation.Owing to the appropriate impedance matching and conductance loss provided by moderate complex permittivity,the effective absorption bandwidth(EAB)of S0.5 was as high as 7.3 GHz,exceeding those of most CoFe_(2)O_(4)-based absorbents.Moreover,the EAB of S1.5 reached 5.0 GHz(8.9–13.9 GHz),covering most of the X band,owing to the intense polarization provided by lattice defects and the heterogeneous interface.The three-dimensional(3D)foam structure circumvented the high density and magnetic agglomeration issues of CoFe_(2)O_(4)nanoparticles,and the good conductivity of 2D curved surfaces could effectively elevate the complex permittivity to ameliorate the dielectric loss of pure CoFe_(2)O_(4).This study provides a novel idea for the theoretical design and practical production of lightweight and broadband pure ferrites.
文摘Layer structured LaPO_4 was added to Al_2O_3 ceramic matrix to improve the machinability of the composites. Microstructures of the Al_2O_3/LaPO_4 ceramic composites were studied at various sintering temperatures (1450, 1520, 1580, 1700 ℃) and different LaPO_4 contents (pure Al_2O_3, 30% LaPO_4, 50% LaPO_4, 70% LaPO_4, pure LaPO_4). Microstructures of the Al_2O_3/LaPO_4 composites are largely dependent on the LaPO_4 content and sintering temperature. X-ray diffraction analysis shows that LaPO_4 phase would not exist in the Al_2O_3/LaPO_4 composites when sintered above 1700 ℃.
基金supported by the National Natural Science Foundation of China(Grant No.51975480 and 52045449)the Research Fund of the State Key Laboratory of Solidification Processing(NPU),China(Grant No.2023-TS-11).
文摘In the present study,Ti-Zr-Cu-Ni amorphous filler metal was used to braze MgAl_(2)O_(4)ceramic and Ti-6Al-4V(TC4)at 875,900,925,950,975 and 1000℃for 10 min.The effects of brazing temperature on interfacial microstructure and mechanical properties of the joints were analyzed.The results showed that typical microstructure of the TC4/MgAl_(2)O_(4)joint was solid solution(SS)α-Ti,acicularα-Ti+(Ti,Zr)_(2)(Ni,Cu)layer,metallic glasses and TiO.With the increase in brazing temperature,(Ti,Zr)_(2)(Ni,Cu)layer gradually dispersed at bonding interface,a continuous layer of TiO appears near MgAl_(2)O_(4)ceramic.With the increase in brazing temperature,the hard and brittle(Ti,Zr)_(2)(Ni,Cu)layer gradually dispersed,resulting in the maximum shear strength of 39.5 MPa.The high-resolution TEM revealed the presence of amorphous structure,which is composed of Ti,Zr,Cu,Ni and Al.The values ofδandΔH_(mix)are calculated to be about 8%and−39.82 kJ/mol for the amorphous phase.
文摘This work aims at solving the problems of difficult dispersion,easy oxidation and high cost of nano carbon during application,carbon/magnesium aluminate spinel(C/MgAl_(2)O_(4))composite powders were prepared using MgC2O4·2H2O,MgO2,Al2O3 powder,and Al powder as raw materials by combustion synthesis.The results indicate that with the maximum MgC2O4·2H2O addition of 33.34 mass%,the prepared powder contains 1.17 mass%of carbon and carbon distributes among spinel grains.The MgAl_(2)O_(4)spinel shows both granular and rod-like morphologies.The granular MgAl_(2)O_(4)spinel is generated from mutual diffusion between MgO and Al2O3;while the rod-like MgAl_(2)O_(4)spinel is mainly formed by the vapor-solid growth mechanism from Mg vapor and Al2O3.
基金supported by the National Natural Science Foundation of China (No.52370174)the Natural Science Foundation of Shandong Province,China (No.ZR2022ME128)Special Projects in Key Areas of Colleges and Universities in Guangdong Province (No.2023ZDZX4050)。
文摘The excessive use of pesticides has exacerbated environmental pollution due to herbicide residues,while their persistent toxicity poses serious challenges to global ecological security.A magnetically recyclable CoFe_(2)O_(4)/BiOBr S-scheme heterojunctions was prepared by microwave-assisted co-precipitation method for photocatalytic degradation of Diuron(DUR) in water.The formation of S-scheme heterojunction enhances electron transfer and charge separation,which was demonstrated by free radical trapping,electrochemical experiments,and DFT calculations.The magnetic CoFe_(2)O_(4)/BiOBr catalysts can achieve 99.9 %removal of diuron in 50 min under visible light irradiation.Furthermore,the system maintains stable performance across a broad p H range(3-9),enabling adaptation to diverse water environments,effective elimination of multiple pollutants,and strong resistance to ionic interference.Using magnetic recovery,CoFe_(2)O_(4)/BiOBr exhibits a high removal rate of 99 % and a markedly low ion leaching rate(<20 μg/L) after six cycles photocatalytic process,confirming its excellent stability and durability.According to HPLCQTOF-MS and DFT calculation,the main ways of DUR degradation include dechlorinated hydroxylation,dealkylation and hydroxylation of aromatic ring and side chain.Toxicity analysis showed that the toxicity of the intermediates generated during degradation was generally lower than that of DUR.The magnetic CoFe_(2)O_(4)/BiOBr S-scheme heterojunction developed in this study exhibits excellent photocatalytic performance,high applicability,good stability,and durability,providing an effective magnetic for the removal of refractory pollutants.
文摘icrostructure and mechanical properties of Al_4C_3 and Al_2O_3 dispersion strengthened aluminum composite fabricated by mechanical attrition and hotpressing consolidation method were studied. It was shown that fine well developed Al_4C_3 stick and equiaxed γAl_2O_3 dispersoids with total content of about 6.6 v% uniformly distributed within the Al grains or along the grain boundaries. The Al/Al_4C_3 and Al/Al_2O_3 interfaces are very clean and well bonded at atomic level, but have no fixed orientation relationships between the dispersoids and the aluminum matrix exists. At ambient and especially elevated temperatures, strength and stiffness of the composite are much higher than that of P/M Al and even better than that of the 15 v% SiCw/Al composite.
基金financially supported by the Key Project of Natural Science Research in Colleges and Universities of Anhui Province,China(No.2022AH050816)the Open Research Grant of Joint National-Local Engineering Research Centre for Safe and Precise Coal Mining(Nos.EC2023013 and EC2022018)+1 种基金the National Natural Science Foundation of China(No.52200139)the Introduction of Talent in Anhui University of Science and Technology,China(Nos.2021yjrc18 and 2023yjrc79)。
文摘Electromagnetic interference,which necessitates the rapid advancement of substances with exceptional capabilities for bsorbing electromagnetic waves,is of urgent concern in contemporary society.In this work,CoFe_(2)O_(4)/residual carbon from coal gasification fine slag(CFO/RC)composites were created using a novel hydrothermal method.Various mechanisms for microwave absorption,including conductive loss,natural resonance,interfacial dipole polarization,and magnetic flux loss,are involved in these composites.Consequently,compared with pure residual carbon materials,this composite offers superior capabilities in microwave absorption.At 7.76GHz,the CFO/RC-2 composite achieves an impressive minimum reflection loss(RL_(min))of-43.99 dB with a thickness of 2.44 mm.Moreover,CFO/RC-3 demonstrates an effective absorption bandwidth(EAB)of up to 4.16 GHz,accompanied by a thickness of 1.18mm.This study revealed the remarkable capability of the composite to diminish electromagnetic waves,providing a new generation method for microwave absorbing materials of superior quality.
