Herein,nanosized Hf_(6)Ta_(2)O_(17) encapsulated graphite flakes were firstly constructed using the sol-gel method,then deposited on the surface of carbon/carbon(C/C)composites by plasma spraying technique to prolong ...Herein,nanosized Hf_(6)Ta_(2)O_(17) encapsulated graphite flakes were firstly constructed using the sol-gel method,then deposited on the surface of carbon/carbon(C/C)composites by plasma spraying technique to prolong their service span in critical environments.Nanoindentation results affirmed the active influ-ence of graphite flakes on elevating the toughness of the Hf_(6)Ta_(2)O_(17) coating.Besides,after being exposed to the oxyacetylene torch with a peak temperature of about 2000℃,the sample achieved near zero ab-lation(0.06 mg/s),meanwhile its porosity and mass ablation rate showed 39.5%and 60.0%reduction when compared to pure Hf_(6)Ta_(2)O_(17) sample.During exposure,the external Hf_(6)Ta_(2)O_(17) served as an oxy-gen barrier for internal graphite flakes,inversely internal graphite flakes provided a“pinning”effect on external Hf_(6)Ta_(2)O_(17),which accounted for its exceptional ablation performance.This work offers a new insight into the design of surface modification of C/C composites and other high-temperature structural materials.展开更多
Silicon-based anode is a promising candidate for all-solid-state batteries(ASSBs).However,it must be further improved because of its tremendous volume change.In this study,various interface treatment strategies for Si...Silicon-based anode is a promising candidate for all-solid-state batteries(ASSBs).However,it must be further improved because of its tremendous volume change.In this study,various interface treatment strategies for SiO/carbon composite anodes in ASSBs were investigated using a multiphysics modeling framework.By evaluating the effects of active(carbon)and inactive coating materials,as well as the geometric and mechanical parameters,this research provides critical insights into optimizing their electrochemical performance and mechanical stability.Computational results indicate that carbon coatings can greatly enhance lithiation kinetics by regulating the interfacial electrochemical potential gradients,reducing the residual lithium concentration,and homogenizing the lithium-ion distribution compared with uncoated or inactive-coated configurations.In addition,thinner carbon coatings further improve capacity retention and stress management by balancing shorter lithium diffusion pathways with mitigated interfacial stress accumulation.Despite their ability to mechanically stabilize the anode,inactive coatings exhibit tradeoffs between lithium transport kinetics and stress modulation,with optimal performance achieved at lower Young’s moduli.Mechanical analyses highlight distinct failure mechanisms at the anode–electrolyte(shear driven)and particle-coating(tension driven)interfaces,emphasizing the need for tailored adhesion strategies.These findings provide actionable guidelines for designing robust SiO-based anodes,emphasizing the interplay among electrochemical efficiency,stress regulation,and interfacial durability in ASSBs.展开更多
To improve the oxidation resistance of carbon/carbon composites,ZrB2-MoSi2/SiC coating on the carbon/carbon substrate was prepared.The inner coating of SiC was prepared by pack cementation and the outer coating of ZrB...To improve the oxidation resistance of carbon/carbon composites,ZrB2-MoSi2/SiC coating on the carbon/carbon substrate was prepared.The inner coating of SiC was prepared by pack cementation and the outer coating of ZrB2-MoSi2 was prepared by slurry painting.The phase compositions and microstructures of the coating were characterized by XRD and SEM,respectively.The preparation and the high temperature oxidation property of the coated composites were investigated.The results show that the outer coating of carbon/carbon composites is composed of ZrB2,MoSi2 and SiC phases.The mass losses of the ZrB2-MoSi2/SiC coated samples with SiC nano-whiskers after 30 h and 10 h of oxidation at 1 273 K and 1 773 K were,respectively,5.3% and 3.0%.The ZrB2-MoSi2/SiC coated samples exhibit self-sealing performance and good oxidation resistance at high temperature.展开更多
Short carbon fiber felts with an initial porosity of 89.5% were deposited by isobaric, isothermal chemical vapor infiltration using natural gas as carbon source. The bulk density of the deposited carbon/carbon （C/C）...Short carbon fiber felts with an initial porosity of 89.5% were deposited by isobaric, isothermal chemical vapor infiltration using natural gas as carbon source. The bulk density of the deposited carbon/carbon （C/C） composites was 1.89 g/cm3 after depositing for 150 h. The microstructure and mechanical properties of the C/C composites were studied by polarized light microscopy, X-ray diffraction, scanning electron microscopy and three-point bending test. The results reveal that high textured pyrolytic carbon is deposited as the matrix of the composites, whose crystalline thickness and graphitization degree highly increase after heat treatment. A distinct decrease of the flexural strength and modulus accompanied by the increase of the toughness of the C/C composites is found to be correlated with the structural changes in the composites during the heat treatment process.展开更多
To improve the oxidation resistance of C/C composites, a double SiC protective coating was prepared by a two-step technique. Firstly, the inner SiC layer was prepared by a pack cementation technique, and then an outer...To improve the oxidation resistance of C/C composites, a double SiC protective coating was prepared by a two-step technique. Firstly, the inner SiC layer was prepared by a pack cementation technique, and then an outer uniform and compact SiC coating was obtained by low pressure chemical vapor deposition. The microstructures and phase compositions of the coatings were characterized by SEM, EDS and XRD analyses. Oxidation behaviour of the SiC coated C/C composites was also investigated. It was found that the double SiC coating could protect C/C composites against oxidation at 1773 K in air for 178 h with a mass loss of 1.25%. The coated samples also underwent thermal shocks between 1773 K and room temperature 16 times. The mass loss of the coated C/C composites was only 2.74%. Double SiC layer structures were uniform and dense, and can suppress the generation of thermal stresses, facilitating an excellent anti-oxidation coating.展开更多
A novel SiC?ZrB2 coating was prepared using a two-step technique by slurry-sintering and chemical vapor reaction on carbon/carbon (C/C) composites. The SiC?ZrB2 coating was composed of the scattered ZrB2 phase and the...A novel SiC?ZrB2 coating was prepared using a two-step technique by slurry-sintering and chemical vapor reaction on carbon/carbon (C/C) composites. The SiC?ZrB2 coating was composed of the scattered ZrB2 phase and the continuous SiC phase. It was observed that a good adhesion was built between the coating and the C/C composites. The SiC?ZrB2 coating samples exhibited a better ablation resistance in comparison with the uncoated C/C composites. The SiO2?ZrO2 barrier layer, the heat dissipation of the gaseous products and the pinning effect of ZrO2 all contributed to the good ablation resistance of the SiC?ZrB2 coated composites.展开更多
A hip joint simulator was employed to predict the clinical wear behaviour of carbon/carbon （C/C） composites with needled carbon cloth preform and carbon felt preform. Wear particles generated from the two kinds of C...A hip joint simulator was employed to predict the clinical wear behaviour of carbon/carbon （C/C） composites with needled carbon cloth preform and carbon felt preform. Wear particles generated from the two kinds of C/C composites were isolated and characterised by the size distribution and morphology. The evolvement of wear particles in the hip joint simulator was proposed. The results show that the wear particles from two kinds of C/C composites have a size ranging from submicron to tens of micrometers. The wear particles have various morphologies including broken fiber, fragment fiber, slice pyrolytic carbon and spherical pyrolytic carbon. C/C composites with needled carbon cloth preforms have larger size range and more broken fiber particles and slice pyrolytic carbon particles in comparison with C/C composites with carbon felt preforms. The evolvement of pyrolytic carbon particles is caused by surface regularization, whereas, the evolvement of carbon fiber particles is related to stress direction in the hip joint simulator.展开更多
In order to effectively employ the unique high temperature mechanical properties of carbon/carbon composite substrates, SiC coatings reinforced by SiC whiskers were prepared by pack cementation method. The effect of S...In order to effectively employ the unique high temperature mechanical properties of carbon/carbon composite substrates, SiC coatings reinforced by SiC whiskers were prepared by pack cementation method. The effect of SiC whiskers on the oxidation resistance properties of the single-layer coating and double-layer coating was investigated. SiC whiskers in the single-layer SiC coating have little effect on the anti-oxidation property but obviously improve the thermal shock property. The double-layer coating with inner-layer reinforced coating exhibits more perfect anti-oxidation ability than the double-layer coating with SiC inner-layer coating.展开更多
Silicon （Si） has been considered as one of the most promising anode material for tHe next generation lithium-ion batteries （LIBs） with high energy densities, due to its high theoretical capacity, abundant availabi...Silicon （Si） has been considered as one of the most promising anode material for tHe next generation lithium-ion batteries （LIBs） with high energy densities, due to its high theoretical capacity, abundant availability and environmental friendliness. However. silicon materials with low intrinsic electric and ionic conductivity suffer from huge volume variation during lithiation/delithiation processes leading to the pulverization of Si and subsequently resulting in severe capacity fading of the electrodes. Coupling of Si with carbon （C） realizes a favorable combination of the two materials properties, such as high lithiation capacity of Si and excellent mechanical and conductive properties of C. making silicon/carbon composite （Si/C） ideal candidates for LIBs anodes. In this review, recent progresses of Si/C materials utilized in LIBs are summarized in terms of structural design principles, material synthesis methods, morphological characteristics and electrochemical performances by highlighting the material structures. The mechanisms behind the performance enhancement are also discussed. Moreover, other factors that affect the performance of Si/C anodes, such as prelithiation, electrolyte additives, and binders, are also discussed. We aim to present a full scope of the Si/C-based anodes, and help understand and design future structures of Si/C anodes in LIBs,展开更多
Carbon fiber reinforced carbon composites(C/Cs),are the most promising high-temperature materials and could be widely applied in aerospace and nucleation fields,owing to their superior performances.However,C/Cs are ve...Carbon fiber reinforced carbon composites(C/Cs),are the most promising high-temperature materials and could be widely applied in aerospace and nucleation fields,owing to their superior performances.However,C/Cs are very susceptible to destructive oxidation and thus fail at elevated temperatures.Though matrix modification and coating technologies with Si-based and ultra-high temperature ceramics(UHTCs)are valid to enhance the oxidation/ablation resistance of C/Cs,it’s not sufficient to satisfy the increasing practical applications,due to the inherent brittleness of ceramics,mismatch issues between coatings and C/C substrates,and the fact that carbonaceous matrices are easily prone to high-temperature oxidation.To effectively solve the aforementioned problems,micro/nano multiscale reinforcing strategies have been developed for C/Cs and/or the coatings over the past two decades,to fabricate C/Cs with high strength and excellent high-temperature stability.This review is to systematically summarize the most recent major and important advancements in some micro/nano multiscale strategies,including nanoparticles,nanowires,carbon nanotubes/fibers,whiskers,graphene,ceramic fibers and hybrid micro/nano structures,for C/Cs and/or the coatings,to achieve high-temperature oxidation/ablation-resistant C/Cs.Finally,this review is concluded with an outlook of major unsolved problems,challenges to be met and future research advice for C/Cs with excellent comprehensive mechanical-thermal performance.It’s hoped that a better understanding of this review will be of high scientific and industrial interest,since it provides unusual and feasible new ideas to develop potential and practical C/Cs with improved high-temperature mechanical and oxidation/ablation-resistant properties.展开更多
Although in-situ growing carbon nanotubes （CNTs） on carbon fibers could greatly increase the matrix-dominated mechanical properties of carbon/carbon composites （C/Cs）, it always decreased the tensile strength of c...Although in-situ growing carbon nanotubes （CNTs） on carbon fibers could greatly increase the matrix-dominated mechanical properties of carbon/carbon composites （C/Cs）, it always decreased the tensile strength of carbon fibers. In this work, CNTs were introduced into unidirectional carbon fiber （CF） preforms by electrophoretic deposition （EPD） and they were used to reinforce C/Cs. Effects of the content of CNTs introduced by EPD on tensile property of unidirectional C/Cs were investigated. Results demonstrated that EPD could be used as a simple and efficient method to fabricate carbon nanotube reinforced C/Cs （CNT-C/Cs） with excellent tensile strength, which pays a meaningful way to maximize the global performance of CNT-C/Cs.展开更多
Uni-directional carbon/carbon composites with high thermal conductivity are suitable to supply continuous thermal protection for future reentry vehicles since they could reduce surface temperature and ablation rates s...Uni-directional carbon/carbon composites with high thermal conductivity are suitable to supply continuous thermal protection for future reentry vehicles since they could reduce surface temperature and ablation rates simultaneously in harsh environments.In this work,the high thermal conductivity carbon/carbon composites were prepared by chemical vapor infiltration.After heat-treatment,both their open porosity and internal friction increase due to the fiber/matrix thermal expansion mismatch;while their thermal conductive performance become better due to more complete carbon structure.With raising heat-treatment temperature from 1800℃to 2450℃,the mass and linear ablation rates of C/C composites with fibers vertical to the oxyacetylene torch for 60 s decrease from 0.66 mg/s and 2.95μm/s to 0.51 mg/s and 2.05μm/s respectively.The improved ablation resistance is resulted from the increased thermal conductivity from 282 to 508 W/(m·K)and more carbon fibers exposed to the flame during ablation,which have better oxidation resistance than those of carbon matrix.While such ablation rates become larger for composites with fibers parallel to the flame,from 1.02 mg/s and 3.73μm/s to 1.28 mg/s and 5.0μm/s respectively since the ablation occurred more easily through gaps at the fiber/matrix interfaces,which become larger and are always exposed to the flame for this case.展开更多
Graphite as a promising anode candidate of K-ion batteries(KIBs)has been increasingly studied currently,but corresponding rate performance and cycling stability are usually inferior to amorphous carbon materials.To pr...Graphite as a promising anode candidate of K-ion batteries(KIBs)has been increasingly studied currently,but corresponding rate performance and cycling stability are usually inferior to amorphous carbon materials.To protect the layer structure and further boost performance,tempura-like carbon/carbon nanocomposite of graphite@pitch-derived S-doped carbon(G@PSC)is designed and prepared by a facile and low-temperature modified molten salt method.This robust encapsulation structure makes their respective advantages complementary to each other,showing mutual promotion of electrochemical performances caused by synergy effect.As a result,the G@PSC electrode is applied in KIBs,delivering impressive rate capabilities(465,408,370,332,290,and 227 m A h g^(-1)at 0.05,0.2,0.5,1,2,and 5 A g^(-1))and ultralong cyclic stability(163 m A g^(-1)remaining even after 8000 cycles at 2 A g^(-1)).On basis of ex-situ studies,the sectionalized K-storage mechanism with adsorption(pseudocapacitance caused by S doping)-intercalation(pitch-derived carbon and graphite)pattern is revealed.Moreover,the exact insights into remarkable rate performances are taken by electrochemical kinetics tests and density functional theory calculation.In a word,this study adopts a facile method to synthesize high-performance carbon/carbon nanocomposite and is of practical significance for development of carbonaceous anode in KIBs.展开更多
In order to improve the oxidation resistance of carbon/carbon （C/C） composites,a SiC/C-AlPO4 multi-layer coating was fabricated on the C/C composites by a simple and low-cost method.The internal SiC bonding layer wa...In order to improve the oxidation resistance of carbon/carbon （C/C） composites,a SiC/C-AlPO4 multi-layer coating was fabricated on the C/C composites by a simple and low-cost method.The internal SiC bonding layer was prepared by a two-step pack cementation process and the external C-AlPO4 coating was deposited by hydrothermal electrophoretic deposition process.Phase compositions and microstructures of the as-prepared multi-layer coating were characterized by X-ray diffraction （XRD）,scaning electron microspocy （SEM） and energy dispersive spectrometer （EDS）.Anti-oxidation properties,oxidation behavior and the failure behavior of the coated composites were investigated.The results indicate that the multi-layer coating exhibits obviously two-layer structure.The inner layer is composed of β-SiC,α-SiC phase with a scale of silicon phase.The outer layer is composed of cristobalite aluminum phosphate （C-AlPO4） crystallites.The SEM observation shows the good bonding between the inner and outer layers.The multi-layer coating displays an excellent oxidation resistance in air in the temperature range from 1573 to 1773 K,and the corresponding oxidation activation energy of the coated C/C composites is calculated to be 117.2 kJ/mol.The oxidation process is predominantly controlled by the diffusion of O2 through the C-AlPO 4 coating.The failure of the multi-layer coating results from the generation of the microholes that may be left by the escape of the oxidation gases.展开更多
Experiments were carried out by adding CaF2 and NaF as catalysts in an Ar atmosphere to study the isothermal reduction kinetics of vanadium titano-magnetite carbon composite pellets under high temperature in the range...Experiments were carried out by adding CaF2 and NaF as catalysts in an Ar atmosphere to study the isothermal reduction kinetics of vanadium titano-magnetite carbon composite pellets under high temperature in the range from 1 473 to 1 673 K. The scanning electron microscope （SEM） was used to characterize the microstructure of product. By analyzing reduction mechanism, it was found that the rate controlling step was gas diffusion, and the activation energy was 178.39 kJ/mol without adding any catalysts. Adding CaF2 or NaF of 3% to vanadium titano-magnetite carbon composite pellets can decrease the apparent activation energy of reduction, and the decrease extent was 14.95 and 15.79 kJ/mol, respectively. In addition, temperature was an important factor influencing on reaction rate.展开更多
In this study, coral?like yolk–shell?structured NiO/C composite microspheres(denoted as CYS?NiO/C) were prepared using spray pyrolysis. The unique yolk–shell structure was characterized, and the formation mechanism ...In this study, coral?like yolk–shell?structured NiO/C composite microspheres(denoted as CYS?NiO/C) were prepared using spray pyrolysis. The unique yolk–shell structure was characterized, and the formation mechanism of the structure was proposed. Both the phase separation of the polyvinylpyrrolidone and polystyrene(PS) colloidal solution and the decompo?sition of the size?controlled PS nanobeads in the droplet played crucial roles in the formation of the unique coral?like yolk–shell structure. The CYS?NiO/C microspheres delivered a reversible discharge capacity of 991 mAh g^(-1) after 500 cycles at the current density of 1.0 A g^(-1). The dis?charge capacity of the CYS?NiO/C microspheres after the 1000 th cycle at the current density of 2.0 A g^(-1) was 635 mAh g^(-1), and the capacity retention measured from the second cycle was 91%. The final discharge capacities of the CYS?NiO/C microspheres at the current densities of 0.5, 1.5, 3.0, 5.0, 7.0, and 10.0 A g^(-1) were 753, 648, 560, 490, 440, and 389 mAh g^(-1), respectively. The synergetic e ect of the coral?like yolk–shell structure with well?defined interconnected mesopores and highly conductive carbon resulted in the excellent Li+?ion storage properties of the CYS?NiO/C microspheres.展开更多
To improve oxidation resistance of carbon/carbon （C/C） composites, a SiC/SiC-MoSi2-ZrB2 double-layer ceramic coating was prepared on C/C composites by two-step pack cementation. The phase compositions and microstruc...To improve oxidation resistance of carbon/carbon （C/C） composites, a SiC/SiC-MoSi2-ZrB2 double-layer ceramic coating was prepared on C/C composites by two-step pack cementation. The phase compositions and microstructures of as-prepared multilayer coating were characterized by X-ray diffraction and scanning electron microscopy. The oxidation resistance at 1773 K and the effect of thermal shock between 1773 K and room temperature on mechanical performance of coated specimens were investigated. The results show that the SiC/SiC-MoSi2-ZrB2 coating exhibits dense structure and is composed of SiC, Si, MoSi2 and ZrB2. It can protect C/C composites from oxidation at 1773 K for more than 510 h with weight loss of 0.5%. The excellent anti-oxidation performance of the coating is due to the formation of SiO2-ZrSiO4 complex glassy film. The coating can also endure the thermal shocks between 1773 K and room temperature for 20 times with residual flexural strength of 86.1%.展开更多
The presence of Hg in the aqueous media is known to cause severe health issues in both humans and animals.Many technologies and especially adsorbents have been applied for its removal. In this study, a graphene oxide...The presence of Hg in the aqueous media is known to cause severe health issues in both humans and animals.Many technologies and especially adsorbents have been applied for its removal. In this study, a graphene oxide–carbon composite(GO–CC) as a new adsorbent was prepared by sol gel procedure and characterized using field emission scanning electron microscopy, BET and EDX. The effects of different variables including solution p H, contact time, adsorbent dose and GO ratio in adsorbent matrix on the removal capacity of Hg were studied. The isotherm data correlated well with the Langmuir isotherm model. Further analysis recommended that the Hg^(2+) adsorption process is governed by the intra-particle and external mass transfer, in which the film diffusion was the rate restrictive step. The presented composite has maximum absorption capacity, q_(max) of 68.8 mg·g^(-1), which is comparable with carbon based adsorbent reported in the previous publications.展开更多
To protect carbon/carbon (C/C) composites from oxidation, a SiC coating modified with SiO2 was prepared by a complex technology. The inner SiC coating with thickness varying from 150 to 300 μm was initially coated by...To protect carbon/carbon (C/C) composites from oxidation, a SiC coating modified with SiO2 was prepared by a complex technology. The inner SiC coating with thickness varying from 150 to 300 μm was initially coated by chemical vapor reaction (CVR): a simple and cheap technique to prepare the SiC coating via siliconizing the substrate that was exposed to the mixed vapor (Si and SiO2) at high temperatures (1 923?2 273 K). Then the as-prepared coating was processed by a dipping and drying procedure with tetraethoxysilane as source materials to form SiO2 to fill the cracks and holes. Oxidation tests show that, after oxidation in air at 1 623 K for 10 h and thermal cycling between 1 623 K and room temperature 5 times, the mass loss of the CVR coated sample is up to 18.21%, while the sample coated with modified coating is only 5.96%, exhibiting an obvious improvement of oxidation and thermal shock resistance of the coating. The mass loss of the modified sample is mainly contributed to the reaction of C/C substrate with oxygen diffusing through the penetrating cracks formed in thermal shock tests.展开更多
Oxidation protective MoSi2-MosSi3/SiC multi-coatings for carbon/carbon composites were prepared by chemical vapor reaction and slurry-sintering method. The influence of preparation technology on the structure and phas...Oxidation protective MoSi2-MosSi3/SiC multi-coatings for carbon/carbon composites were prepared by chemical vapor reaction and slurry-sintering method. The influence of preparation technology on the structure and phase composition of the coating was investigated by scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS） and X-ray diffraction （XRD） analyses, and then their relationship was discussed. The results indicate that the Si/Mo ratio of the slurry and sintering processing were two main factors that significantly affected the structure and phase composition of the multi-coating. Appropriate sintering process and relatively high Si/Mo ratio were essential for preparing the multi-coating with dense structure and favorable phase composition. After being sintered at 1723 K for 2 h and with the Si/Mo ratio of the slurry being 4.5 （weight ratio）, a dense structure accompanied by favorable phase composition of the coating can be obtained. When heat treated at 2373 K for I h, this coating became more compact and continuous. Oxidation tests （performed at 1623 and 1823 K） demonstrated that both of these two obtained multi-coatings exhibited better anti-oxidation property than single layer SiC coating.展开更多
基金supported by the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(Grant No.CX2021006)the National Natural Science Foundation of China(Grant Nos.91860203,51727804,and 52130205)the Fundamental Research Funds for the Central Universities(Grant No.3102019TS0409).
文摘Herein,nanosized Hf_(6)Ta_(2)O_(17) encapsulated graphite flakes were firstly constructed using the sol-gel method,then deposited on the surface of carbon/carbon(C/C)composites by plasma spraying technique to prolong their service span in critical environments.Nanoindentation results affirmed the active influ-ence of graphite flakes on elevating the toughness of the Hf_(6)Ta_(2)O_(17) coating.Besides,after being exposed to the oxyacetylene torch with a peak temperature of about 2000℃,the sample achieved near zero ab-lation(0.06 mg/s),meanwhile its porosity and mass ablation rate showed 39.5%and 60.0%reduction when compared to pure Hf_(6)Ta_(2)O_(17) sample.During exposure,the external Hf_(6)Ta_(2)O_(17) served as an oxy-gen barrier for internal graphite flakes,inversely internal graphite flakes provided a“pinning”effect on external Hf_(6)Ta_(2)O_(17),which accounted for its exceptional ablation performance.This work offers a new insight into the design of surface modification of C/C composites and other high-temperature structural materials.
基金supported by the startup funding from Shanghai Jiao Tong University(Grant No.WH220402052).
文摘Silicon-based anode is a promising candidate for all-solid-state batteries(ASSBs).However,it must be further improved because of its tremendous volume change.In this study,various interface treatment strategies for SiO/carbon composite anodes in ASSBs were investigated using a multiphysics modeling framework.By evaluating the effects of active(carbon)and inactive coating materials,as well as the geometric and mechanical parameters,this research provides critical insights into optimizing their electrochemical performance and mechanical stability.Computational results indicate that carbon coatings can greatly enhance lithiation kinetics by regulating the interfacial electrochemical potential gradients,reducing the residual lithium concentration,and homogenizing the lithium-ion distribution compared with uncoated or inactive-coated configurations.In addition,thinner carbon coatings further improve capacity retention and stress management by balancing shorter lithium diffusion pathways with mitigated interfacial stress accumulation.Despite their ability to mechanically stabilize the anode,inactive coatings exhibit tradeoffs between lithium transport kinetics and stress modulation,with optimal performance achieved at lower Young’s moduli.Mechanical analyses highlight distinct failure mechanisms at the anode–electrolyte(shear driven)and particle-coating(tension driven)interfaces,emphasizing the need for tailored adhesion strategies.These findings provide actionable guidelines for designing robust SiO-based anodes,emphasizing the interplay among electrochemical efficiency,stress regulation,and interfacial durability in ASSBs.
基金Project(50721003) supported by the Innovation Community Foundation of National Natural Science of ChinaProject(2011CB605805) supported by the National Basic Research Program of China
文摘To improve the oxidation resistance of carbon/carbon composites,ZrB2-MoSi2/SiC coating on the carbon/carbon substrate was prepared.The inner coating of SiC was prepared by pack cementation and the outer coating of ZrB2-MoSi2 was prepared by slurry painting.The phase compositions and microstructures of the coating were characterized by XRD and SEM,respectively.The preparation and the high temperature oxidation property of the coated composites were investigated.The results show that the outer coating of carbon/carbon composites is composed of ZrB2,MoSi2 and SiC phases.The mass losses of the ZrB2-MoSi2/SiC coated samples with SiC nano-whiskers after 30 h and 10 h of oxidation at 1 273 K and 1 773 K were,respectively,5.3% and 3.0%.The ZrB2-MoSi2/SiC coated samples exhibit self-sealing performance and good oxidation resistance at high temperature.
基金Projects(51221001,50972121)supported by the National Natural Science Foundation of ChinaProject(B08040)supported by the Introducing Talents of Discipline to Universities,ChinaProject(11-BZ-2012)supported by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),China
文摘Short carbon fiber felts with an initial porosity of 89.5% were deposited by isobaric, isothermal chemical vapor infiltration using natural gas as carbon source. The bulk density of the deposited carbon/carbon （C/C） composites was 1.89 g/cm3 after depositing for 150 h. The microstructure and mechanical properties of the C/C composites were studied by polarized light microscopy, X-ray diffraction, scanning electron microscopy and three-point bending test. The results reveal that high textured pyrolytic carbon is deposited as the matrix of the composites, whose crystalline thickness and graphitization degree highly increase after heat treatment. A distinct decrease of the flexural strength and modulus accompanied by the increase of the toughness of the C/C composites is found to be correlated with the structural changes in the composites during the heat treatment process.
基金Projects(51221001,51222207)supported by the National Natural Science Foundation of ChinaProject(090677)supported by the Program for New Century Excellent Talents in University of Ministry of Education of ChinaProject(B08040)supported by the Program of Introducing Talents of Discipline to Universities (111 Project) of China
文摘To improve the oxidation resistance of C/C composites, a double SiC protective coating was prepared by a two-step technique. Firstly, the inner SiC layer was prepared by a pack cementation technique, and then an outer uniform and compact SiC coating was obtained by low pressure chemical vapor deposition. The microstructures and phase compositions of the coatings were characterized by SEM, EDS and XRD analyses. Oxidation behaviour of the SiC coated C/C composites was also investigated. It was found that the double SiC coating could protect C/C composites against oxidation at 1773 K in air for 178 h with a mass loss of 1.25%. The coated samples also underwent thermal shocks between 1773 K and room temperature 16 times. The mass loss of the coated C/C composites was only 2.74%. Double SiC layer structures were uniform and dense, and can suppress the generation of thermal stresses, facilitating an excellent anti-oxidation coating.
基金Projects(51404041,51304249)supported by the National Natural Science Foundation of ChinaProject(2015JJ3016)supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(2011CB605801)supported by the National Basic Research Program of ChinaProject supported by the State Key Laboratory for Powder Metallurgy Foundation,Central South University,Changsha,China
文摘A novel SiC?ZrB2 coating was prepared using a two-step technique by slurry-sintering and chemical vapor reaction on carbon/carbon (C/C) composites. The SiC?ZrB2 coating was composed of the scattered ZrB2 phase and the continuous SiC phase. It was observed that a good adhesion was built between the coating and the C/C composites. The SiC?ZrB2 coating samples exhibited a better ablation resistance in comparison with the uncoated C/C composites. The SiO2?ZrO2 barrier layer, the heat dissipation of the gaseous products and the pinning effect of ZrO2 all contributed to the good ablation resistance of the SiC?ZrB2 coated composites.
基金Projects (50832004, 51202194) supported by National Natural Science Foundation of ChinaProject (11-BZ-2012) supported by the Research Fund of the State Key Laboratory of Solidification Processing (NWPU), China+1 种基金Project (T201107) supported by Shenzhen Key Laboratory of Special Functional Materials, Shenzhen University, ChinaProject (B08040) supported by 111 Project of China
文摘A hip joint simulator was employed to predict the clinical wear behaviour of carbon/carbon （C/C） composites with needled carbon cloth preform and carbon felt preform. Wear particles generated from the two kinds of C/C composites were isolated and characterised by the size distribution and morphology. The evolvement of wear particles in the hip joint simulator was proposed. The results show that the wear particles from two kinds of C/C composites have a size ranging from submicron to tens of micrometers. The wear particles have various morphologies including broken fiber, fragment fiber, slice pyrolytic carbon and spherical pyrolytic carbon. C/C composites with needled carbon cloth preforms have larger size range and more broken fiber particles and slice pyrolytic carbon particles in comparison with C/C composites with carbon felt preforms. The evolvement of pyrolytic carbon particles is caused by surface regularization, whereas, the evolvement of carbon fiber particles is related to stress direction in the hip joint simulator.
基金This work was financially supported by the National Natural Science Foundation of China for Distinguished Young Scholars (No. 50225210) the Foundation of Aeronautic Science of China (No. 03H53044).
文摘In order to effectively employ the unique high temperature mechanical properties of carbon/carbon composite substrates, SiC coatings reinforced by SiC whiskers were prepared by pack cementation method. The effect of SiC whiskers on the oxidation resistance properties of the single-layer coating and double-layer coating was investigated. SiC whiskers in the single-layer SiC coating have little effect on the anti-oxidation property but obviously improve the thermal shock property. The double-layer coating with inner-layer reinforced coating exhibits more perfect anti-oxidation ability than the double-layer coating with SiC inner-layer coating.
文摘Silicon （Si） has been considered as one of the most promising anode material for tHe next generation lithium-ion batteries （LIBs） with high energy densities, due to its high theoretical capacity, abundant availability and environmental friendliness. However. silicon materials with low intrinsic electric and ionic conductivity suffer from huge volume variation during lithiation/delithiation processes leading to the pulverization of Si and subsequently resulting in severe capacity fading of the electrodes. Coupling of Si with carbon （C） realizes a favorable combination of the two materials properties, such as high lithiation capacity of Si and excellent mechanical and conductive properties of C. making silicon/carbon composite （Si/C） ideal candidates for LIBs anodes. In this review, recent progresses of Si/C materials utilized in LIBs are summarized in terms of structural design principles, material synthesis methods, morphological characteristics and electrochemical performances by highlighting the material structures. The mechanisms behind the performance enhancement are also discussed. Moreover, other factors that affect the performance of Si/C anodes, such as prelithiation, electrolyte additives, and binders, are also discussed. We aim to present a full scope of the Si/C-based anodes, and help understand and design future structures of Si/C anodes in LIBs,
基金supported by the National Natural Science Foundation of China(Nos.91860203,51821091,51872239,52002321 and 52061135102)the China Postdoctoral Science Foundation(No.2019M660265)+3 种基金the Fundamental Research Funds for the Central Universities(China,Nos.G2019KY05116,G2020KY05125)the Innovation Talent Promotion Plan of Shaanxi Province for Science and Technology Innovation Team(No.2020TD003)the Creative Research Foundation of Science and Technology on Thermostructural Composite Materials Laboratory(Nos.614291102010517,5050200015 and 5150200033)the Shaanxi Provincial Education Department of China(No.2020JQ-170)。
文摘Carbon fiber reinforced carbon composites(C/Cs),are the most promising high-temperature materials and could be widely applied in aerospace and nucleation fields,owing to their superior performances.However,C/Cs are very susceptible to destructive oxidation and thus fail at elevated temperatures.Though matrix modification and coating technologies with Si-based and ultra-high temperature ceramics(UHTCs)are valid to enhance the oxidation/ablation resistance of C/Cs,it’s not sufficient to satisfy the increasing practical applications,due to the inherent brittleness of ceramics,mismatch issues between coatings and C/C substrates,and the fact that carbonaceous matrices are easily prone to high-temperature oxidation.To effectively solve the aforementioned problems,micro/nano multiscale reinforcing strategies have been developed for C/Cs and/or the coatings over the past two decades,to fabricate C/Cs with high strength and excellent high-temperature stability.This review is to systematically summarize the most recent major and important advancements in some micro/nano multiscale strategies,including nanoparticles,nanowires,carbon nanotubes/fibers,whiskers,graphene,ceramic fibers and hybrid micro/nano structures,for C/Cs and/or the coatings,to achieve high-temperature oxidation/ablation-resistant C/Cs.Finally,this review is concluded with an outlook of major unsolved problems,challenges to be met and future research advice for C/Cs with excellent comprehensive mechanical-thermal performance.It’s hoped that a better understanding of this review will be of high scientific and industrial interest,since it provides unusual and feasible new ideas to develop potential and practical C/Cs with improved high-temperature mechanical and oxidation/ablation-resistant properties.
基金supported by the Program of Introducing Talents of Discipline to Universities(No.B08040)the Ph.D Thesis Innovation Fund of NWPU(No.cx201214)+1 种基金the Key Grant Proiect of Chinese Ministry of Education(No.313047)the National Natural Science Foundation of China(Nos. 51275417.50832004 and 51202194)
文摘Although in-situ growing carbon nanotubes （CNTs） on carbon fibers could greatly increase the matrix-dominated mechanical properties of carbon/carbon composites （C/Cs）, it always decreased the tensile strength of carbon fibers. In this work, CNTs were introduced into unidirectional carbon fiber （CF） preforms by electrophoretic deposition （EPD） and they were used to reinforce C/Cs. Effects of the content of CNTs introduced by EPD on tensile property of unidirectional C/Cs were investigated. Results demonstrated that EPD could be used as a simple and efficient method to fabricate carbon nanotube reinforced C/Cs （CNT-C/Cs） with excellent tensile strength, which pays a meaningful way to maximize the global performance of CNT-C/Cs.
基金supported by the National Natural Science Foundation of China [grant numbers 51572223,51727804]
文摘Uni-directional carbon/carbon composites with high thermal conductivity are suitable to supply continuous thermal protection for future reentry vehicles since they could reduce surface temperature and ablation rates simultaneously in harsh environments.In this work,the high thermal conductivity carbon/carbon composites were prepared by chemical vapor infiltration.After heat-treatment,both their open porosity and internal friction increase due to the fiber/matrix thermal expansion mismatch;while their thermal conductive performance become better due to more complete carbon structure.With raising heat-treatment temperature from 1800℃to 2450℃,the mass and linear ablation rates of C/C composites with fibers vertical to the oxyacetylene torch for 60 s decrease from 0.66 mg/s and 2.95μm/s to 0.51 mg/s and 2.05μm/s respectively.The improved ablation resistance is resulted from the increased thermal conductivity from 282 to 508 W/(m·K)and more carbon fibers exposed to the flame during ablation,which have better oxidation resistance than those of carbon matrix.While such ablation rates become larger for composites with fibers parallel to the flame,from 1.02 mg/s and 3.73μm/s to 1.28 mg/s and 5.0μm/s respectively since the ablation occurred more easily through gaps at the fiber/matrix interfaces,which become larger and are always exposed to the flame for this case.
基金the financial support from the National Natural Science Foundation of China(No.91963118)the 111 Project(No.B13013)supported by the Open Project Program of Key Laboratory of Preparation and Application of Environmental Friendly Materials(Jilin Normal University),Ministry of Education,China(No.2020004)。
文摘Graphite as a promising anode candidate of K-ion batteries(KIBs)has been increasingly studied currently,but corresponding rate performance and cycling stability are usually inferior to amorphous carbon materials.To protect the layer structure and further boost performance,tempura-like carbon/carbon nanocomposite of graphite@pitch-derived S-doped carbon(G@PSC)is designed and prepared by a facile and low-temperature modified molten salt method.This robust encapsulation structure makes their respective advantages complementary to each other,showing mutual promotion of electrochemical performances caused by synergy effect.As a result,the G@PSC electrode is applied in KIBs,delivering impressive rate capabilities(465,408,370,332,290,and 227 m A h g^(-1)at 0.05,0.2,0.5,1,2,and 5 A g^(-1))and ultralong cyclic stability(163 m A g^(-1)remaining even after 8000 cycles at 2 A g^(-1)).On basis of ex-situ studies,the sectionalized K-storage mechanism with adsorption(pseudocapacitance caused by S doping)-intercalation(pitch-derived carbon and graphite)pattern is revealed.Moreover,the exact insights into remarkable rate performances are taken by electrochemical kinetics tests and density functional theory calculation.In a word,this study adopts a facile method to synthesize high-performance carbon/carbon nanocomposite and is of practical significance for development of carbonaceous anode in KIBs.
基金supported by the National Natural Science Foundation of China (Grant No. 50772063)the Foundation of New Century Excellent Talent in University of China (Grant No. NCET-06-0893)+1 种基金the Doctorate Research Foundation of Ministry of Education of China(Grant No. 20070708001)the Graduate Innovation Fund of SUST
文摘In order to improve the oxidation resistance of carbon/carbon （C/C） composites,a SiC/C-AlPO4 multi-layer coating was fabricated on the C/C composites by a simple and low-cost method.The internal SiC bonding layer was prepared by a two-step pack cementation process and the external C-AlPO4 coating was deposited by hydrothermal electrophoretic deposition process.Phase compositions and microstructures of the as-prepared multi-layer coating were characterized by X-ray diffraction （XRD）,scaning electron microspocy （SEM） and energy dispersive spectrometer （EDS）.Anti-oxidation properties,oxidation behavior and the failure behavior of the coated composites were investigated.The results indicate that the multi-layer coating exhibits obviously two-layer structure.The inner layer is composed of β-SiC,α-SiC phase with a scale of silicon phase.The outer layer is composed of cristobalite aluminum phosphate （C-AlPO4） crystallites.The SEM observation shows the good bonding between the inner and outer layers.The multi-layer coating displays an excellent oxidation resistance in air in the temperature range from 1573 to 1773 K,and the corresponding oxidation activation energy of the coated C/C composites is calculated to be 117.2 kJ/mol.The oxidation process is predominantly controlled by the diffusion of O2 through the C-AlPO 4 coating.The failure of the multi-layer coating results from the generation of the microholes that may be left by the escape of the oxidation gases.
基金Item Sponsored by National Key Technology Research and Development Program of China(2008BAB32B05)
文摘Experiments were carried out by adding CaF2 and NaF as catalysts in an Ar atmosphere to study the isothermal reduction kinetics of vanadium titano-magnetite carbon composite pellets under high temperature in the range from 1 473 to 1 673 K. The scanning electron microscope （SEM） was used to characterize the microstructure of product. By analyzing reduction mechanism, it was found that the rate controlling step was gas diffusion, and the activation energy was 178.39 kJ/mol without adding any catalysts. Adding CaF2 or NaF of 3% to vanadium titano-magnetite carbon composite pellets can decrease the apparent activation energy of reduction, and the decrease extent was 14.95 and 15.79 kJ/mol, respectively. In addition, temperature was an important factor influencing on reaction rate.
基金supported by the National Research Foundation of Korea (NRF) Grant funded by the Korea government (MSIP) (NRF-2018R1A4A1024691, NRF-2017M1A2A2087577, and NRF-2018R1D1A3B07042514)
文摘In this study, coral?like yolk–shell?structured NiO/C composite microspheres(denoted as CYS?NiO/C) were prepared using spray pyrolysis. The unique yolk–shell structure was characterized, and the formation mechanism of the structure was proposed. Both the phase separation of the polyvinylpyrrolidone and polystyrene(PS) colloidal solution and the decompo?sition of the size?controlled PS nanobeads in the droplet played crucial roles in the formation of the unique coral?like yolk–shell structure. The CYS?NiO/C microspheres delivered a reversible discharge capacity of 991 mAh g^(-1) after 500 cycles at the current density of 1.0 A g^(-1). The dis?charge capacity of the CYS?NiO/C microspheres after the 1000 th cycle at the current density of 2.0 A g^(-1) was 635 mAh g^(-1), and the capacity retention measured from the second cycle was 91%. The final discharge capacities of the CYS?NiO/C microspheres at the current densities of 0.5, 1.5, 3.0, 5.0, 7.0, and 10.0 A g^(-1) were 753, 648, 560, 490, 440, and 389 mAh g^(-1), respectively. The synergetic e ect of the coral?like yolk–shell structure with well?defined interconnected mesopores and highly conductive carbon resulted in the excellent Li+?ion storage properties of the CYS?NiO/C microspheres.
基金supported by the National Natural Science Foundation of China(Nos.50902111 and 51272213)NPU Foundation for Fundamental Researchthe Research Fund of the State Key Laboratory of Solidification Processing(NWPU),China(No.73-QP-2010)
文摘To improve oxidation resistance of carbon/carbon （C/C） composites, a SiC/SiC-MoSi2-ZrB2 double-layer ceramic coating was prepared on C/C composites by two-step pack cementation. The phase compositions and microstructures of as-prepared multilayer coating were characterized by X-ray diffraction and scanning electron microscopy. The oxidation resistance at 1773 K and the effect of thermal shock between 1773 K and room temperature on mechanical performance of coated specimens were investigated. The results show that the SiC/SiC-MoSi2-ZrB2 coating exhibits dense structure and is composed of SiC, Si, MoSi2 and ZrB2. It can protect C/C composites from oxidation at 1773 K for more than 510 h with weight loss of 0.5%. The excellent anti-oxidation performance of the coating is due to the formation of SiO2-ZrSiO4 complex glassy film. The coating can also endure the thermal shocks between 1773 K and room temperature for 20 times with residual flexural strength of 86.1%.
文摘The presence of Hg in the aqueous media is known to cause severe health issues in both humans and animals.Many technologies and especially adsorbents have been applied for its removal. In this study, a graphene oxide–carbon composite(GO–CC) as a new adsorbent was prepared by sol gel procedure and characterized using field emission scanning electron microscopy, BET and EDX. The effects of different variables including solution p H, contact time, adsorbent dose and GO ratio in adsorbent matrix on the removal capacity of Hg were studied. The isotherm data correlated well with the Langmuir isotherm model. Further analysis recommended that the Hg^(2+) adsorption process is governed by the intra-particle and external mass transfer, in which the film diffusion was the rate restrictive step. The presented composite has maximum absorption capacity, q_(max) of 68.8 mg·g^(-1), which is comparable with carbon based adsorbent reported in the previous publications.
基金Project(2006CB600901) supported by the National Basic Research Program of ChinaProject(50802115) supported by the National Natural Science Foundation of China
文摘To protect carbon/carbon (C/C) composites from oxidation, a SiC coating modified with SiO2 was prepared by a complex technology. The inner SiC coating with thickness varying from 150 to 300 μm was initially coated by chemical vapor reaction (CVR): a simple and cheap technique to prepare the SiC coating via siliconizing the substrate that was exposed to the mixed vapor (Si and SiO2) at high temperatures (1 923?2 273 K). Then the as-prepared coating was processed by a dipping and drying procedure with tetraethoxysilane as source materials to form SiO2 to fill the cracks and holes. Oxidation tests show that, after oxidation in air at 1 623 K for 10 h and thermal cycling between 1 623 K and room temperature 5 times, the mass loss of the CVR coated sample is up to 18.21%, while the sample coated with modified coating is only 5.96%, exhibiting an obvious improvement of oxidation and thermal shock resistance of the coating. The mass loss of the modified sample is mainly contributed to the reaction of C/C substrate with oxygen diffusing through the penetrating cracks formed in thermal shock tests.
基金supported by the National Natural Science Foundation of China under grant Nos. 50772134 and 50802115the National Basic Research Program of China ("973 Program") under grant No. 2006CB600901
文摘Oxidation protective MoSi2-MosSi3/SiC multi-coatings for carbon/carbon composites were prepared by chemical vapor reaction and slurry-sintering method. The influence of preparation technology on the structure and phase composition of the coating was investigated by scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS） and X-ray diffraction （XRD） analyses, and then their relationship was discussed. The results indicate that the Si/Mo ratio of the slurry and sintering processing were two main factors that significantly affected the structure and phase composition of the multi-coating. Appropriate sintering process and relatively high Si/Mo ratio were essential for preparing the multi-coating with dense structure and favorable phase composition. After being sintered at 1723 K for 2 h and with the Si/Mo ratio of the slurry being 4.5 （weight ratio）, a dense structure accompanied by favorable phase composition of the coating can be obtained. When heat treated at 2373 K for I h, this coating became more compact and continuous. Oxidation tests （performed at 1623 and 1823 K） demonstrated that both of these two obtained multi-coatings exhibited better anti-oxidation property than single layer SiC coating.
