In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical m...In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.展开更多
Particle morphology is critical in affecting the crushing behavior of rockfill materials.In contrast,most current single particle simulations lack satisfactory morphology accuracy,and the resulting crushing modes devi...Particle morphology is critical in affecting the crushing behavior of rockfill materials.In contrast,most current single particle simulations lack satisfactory morphology accuracy,and the resulting crushing modes deviate from observations to some extent.Therefore,we reconstruct the real particle morphology with the spherical harmonic(SH)method and employ the finite-discrete element method(FDEM)to simulate the one-dimensional(1D)compressive crushing process of basalt particles commonly used in rockfill.The influences of four main morphological parameters,i.e.sphericity,aspect ratio,roundness,and convexity,on the single particle strength and the crushing modes are discussed.The results show that with the SH degree set to 15 and a mesh number of 20,480,the FDEM models of reconstructed particles achieve sufficient morphology accuracy and high computational efficiency.Based on the model,the simulation results demonstrate that the aspect ratio has the most significant impact on single particle strength,followed by sphericity.In contrast,roundness and convexity have a weaker effect than the above two parameters.Also,it is revealed that single particle strength decreases with increasing aspect ratio and sphericity,while it increases with higher roundness and convexity.Furthermore,aspect ratio significantly changes the initial crushing position,sphericity dominates post-crushing fragment size and quantity,and roundness mainly affects post-crushing morphology.The model results have been employed in establishing a support vector regression(SVR)-based predicted model,exhibiting good predictive performance and advantages for the optimization of rockfill particles in engineering.展开更多
Crush syndrome demands an integrated multidisciplinary approach that spans acute surgical decisions and long-term functional recovery.In response to Khan et al’s recent systematic review,we propose complementary pers...Crush syndrome demands an integrated multidisciplinary approach that spans acute surgical decisions and long-term functional recovery.In response to Khan et al’s recent systematic review,we propose complementary perspectives that address two underrepresented dimensions:Vascular surgical decision-making and psychiatric rehabilitation.We emphasize the use of intraoperative technologies such as indocyanine green fluorescence angiography and compartment pressure monitoring to guide limb salvage strategies and reperfusion management.Additionally,we advocate for the systematic integration of mental health screening and trauma-informed psychiatric care to address the high prevalence of psychological distress in survivors.Embedding these domains into standardized protocols could enhance both short-and long-term outcomes,particularly in highimpact trauma and disaster settings.展开更多
The effectiveness of horizontal well multi-stage and multi-cluster fracturing in the fractured soft coal seam roof for coalbed methane(CBM) extraction has been demonstrated.This study focuses on the geological charact...The effectiveness of horizontal well multi-stage and multi-cluster fracturing in the fractured soft coal seam roof for coalbed methane(CBM) extraction has been demonstrated.This study focuses on the geological characteristics of the No.5 and No.11 coal seams in the Hancheng Block,Ordos Basin,China.A multi-functional,variable-size rock sample mold capable of securing the wellbore was developed to simulate layered formations comprising strata of varying lithology and thicknesses.A novel segmented fracturing simulation method based on an expandable pipe plugging technique is proposed.Large-scale true triaxial experiments were conducted to investigate the effects of horizontal wellbore location,perforation strategy,roof lithology,and vertical stress difference on fracture propagation,hydraulic energy variation,and the stimulated reservoir volume in horizontal wells targeting the soft coal seam roof.The results indicate that bilateral downward perforation with a phase angle of 120° optimizes hydraulic energy conservation,reduces operational costs,enhances fracture formation,and prevents fracturing failure caused by coal powder generation and migration.This perforation mode is thus considered optimal for coal seam roof fracturing.When the roof consists of sandstone,each perforation cluster tends to initiate a single dominant fracture with a regular geometry.In contrast,hydraulic fractures formed in mudstone roofs display diverse morphology.Due to its high strength,the sandstone roof requires significantly higher pressure for crack initiation and propagation,whereas the mudstone roof,with its strong water sensitivity,exhibits lower fracturing pressures.To mitigate inter-cluster interference,cluster spacing in mudstone roofs should be greater than that in sandstone roofs.Horizontal wellbore placement critically influences fracturing effectiveness.For indirect fracturing in sandstone roofs,an optimal position is 25 mm away from the lithological interface.In contrast,the optimal location for indirect fracturing in mudstone roofs is directly at the lithological interface with the coal seam.Higher vertical stress coefficients lead to increased fractu ring pressures and promote vertical,layer-penetrating fractures.A coefficient of 0.5 is identified as optimal for achieving effective indirect fracturing.This study provides valuable insights for the design and optimization of staged fracturing in horizontal wells targeting crushed soft coal seam roofs.展开更多
The effects of crushing energy, ore hardness and particle size of cassiterite polymetallic sulphide ore and lead-zinc polymetallic sulphide ore on the crushing characteristics during impact crushing were investigated ...The effects of crushing energy, ore hardness and particle size of cassiterite polymetallic sulphide ore and lead-zinc polymetallic sulphide ore on the crushing characteristics during impact crushing were investigated by mineral liberation analyzer(MLA) and drop weight test. The results show that both ores contain pyrrhotite, sphalerite, jamesonite, gangue mica and quartz except cassiterite. Cassiterite is closely associated with sulphide and quartz to form aggregates, which are mixed with each other in the form of intergrowth or symbiotic disseminated fine grains. Cassiterite has a significant impact on ore crushing characteristics. Ore hardness is negatively correlated with the product of crushing parameters of A and b, i.e. A×b, the effect of crushing energy on crushing fineness is related to crushing parameters A and b, and the influence degree increases with the increase of A. The influence degree increases with the increase of b when crushing energy ECS is less than 1 kW·h/t, and the influence degree decreases with the increase of b when crushing energy ECS is greater than 1 kW·h/t. The impact of crushing energy on crushing fineness is greater than that of ore particle size when the crushing energy is lower;on the contrary, the impact of ore particle size on crushing fineness is greater than that of crushing energy when crushing energy is higher.展开更多
Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and t...Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and the manufacture of industrial crusher equipment. The main objective of this research is to quantify the crushability of hard rocks based on their mineralogical and mechanical properties. For this purpose, the mineralogical, physical, and mechanical properties of various hard rocks were determined. A new compressive crushing value(CCV) testing methodology was proposed. The results obtained from CCV tests were compared with those from mineralogical inspections, rock strength as well as mechanical aggregate tests. Strong correlations were found between CCV and several rock and aggregate properties such as uniaxial compressive strength(UCS), the brittleness index(S_(20)), and aggregate impact value(AIV). Furthermore, the relationship between the mineralogical properties of the rocks and their CCVs were established. It is concluded that the proposed testing methodology is simple and highly repeatable and could be utilized as a pre-design tool in the design stage of the crushing process for rock quarries.展开更多
Double-layer, multi-roller plate crusher is a new device, that uses a multi-stage series crushing style to break particles, with the crushing ratio distribution directly influencing the machine＇s performance. Three c...Double-layer, multi-roller plate crusher is a new device, that uses a multi-stage series crushing style to break particles, with the crushing ratio distribution directly influencing the machine＇s performance. Three crushing ratios of 2.25, 2.15 and 2.01, used for fuzzy physical programming, were determined. The comparison of the optimized result between the double-layer multi-roller plate crusher and a high pressure roll grinder showed that the double-layer multi-roller plate crusher had a better performance, reducing crushing force and wear.展开更多
The influence of rock strength properties on Jaw Crusher performance was carried out to determine the effect of rock strength on crushing time and grain size distribution of the rocks.Investigation was conducted on fo...The influence of rock strength properties on Jaw Crusher performance was carried out to determine the effect of rock strength on crushing time and grain size distribution of the rocks.Investigation was conducted on four different rock samples namely marble,dolomite,limestone and granite which were representatively selected from fragmented lumps in quarries.Unconfined compressive strength and Point load tests were carried out on each rock sample as well as crushing time and size analysis.The results of the strength parameters of each sample were correlated with the crushing time and the grain size distribution of the rock types.The results of the strength tests show that granite has the highest mean value of 101.67 MPa for Unconfined Compressive Strength(UCS) test,6.43 MPa for Point Load test while dolomite has the least mean value of 30.56 MPa for UCS test and 0.95 MPa for Point Load test.According to the International Society for Rock Mechanic(ISRM) standard,the granite rock sample may be classified as having very high strength and dolomite rock sample,low strength.Also,the granite rock has the highest crushing time(21.0 s) and dolomite rock has the least value(5.0 s).Based on the results of the investigation,it was found out that there is a great influence of strength properties on crushing time of rock types.展开更多
基金supported by Anhui Provincial Natural Science Foundation(2408085QA030)Natural Science Research Project of Anhui Educational Committee,China(2022AH050825)+3 种基金Medical Special Cultivation Project of Anhui University of Science and Technology(YZ2023H2C008)the Excellent Research and Innovation Team of Anhui Province,China(2022AH010052)the Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology,China(2021yjrc51)Collaborative Innovation Program of Hefei Science Center,CAS,China(2019HSC-CIP006).
文摘In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.
基金financial support to this study from the National Natural Science Foundation of China,NSFC(Grant No.52278367).
文摘Particle morphology is critical in affecting the crushing behavior of rockfill materials.In contrast,most current single particle simulations lack satisfactory morphology accuracy,and the resulting crushing modes deviate from observations to some extent.Therefore,we reconstruct the real particle morphology with the spherical harmonic(SH)method and employ the finite-discrete element method(FDEM)to simulate the one-dimensional(1D)compressive crushing process of basalt particles commonly used in rockfill.The influences of four main morphological parameters,i.e.sphericity,aspect ratio,roundness,and convexity,on the single particle strength and the crushing modes are discussed.The results show that with the SH degree set to 15 and a mesh number of 20,480,the FDEM models of reconstructed particles achieve sufficient morphology accuracy and high computational efficiency.Based on the model,the simulation results demonstrate that the aspect ratio has the most significant impact on single particle strength,followed by sphericity.In contrast,roundness and convexity have a weaker effect than the above two parameters.Also,it is revealed that single particle strength decreases with increasing aspect ratio and sphericity,while it increases with higher roundness and convexity.Furthermore,aspect ratio significantly changes the initial crushing position,sphericity dominates post-crushing fragment size and quantity,and roundness mainly affects post-crushing morphology.The model results have been employed in establishing a support vector regression(SVR)-based predicted model,exhibiting good predictive performance and advantages for the optimization of rockfill particles in engineering.
文摘Crush syndrome demands an integrated multidisciplinary approach that spans acute surgical decisions and long-term functional recovery.In response to Khan et al’s recent systematic review,we propose complementary perspectives that address two underrepresented dimensions:Vascular surgical decision-making and psychiatric rehabilitation.We emphasize the use of intraoperative technologies such as indocyanine green fluorescence angiography and compartment pressure monitoring to guide limb salvage strategies and reperfusion management.Additionally,we advocate for the systematic integration of mental health screening and trauma-informed psychiatric care to address the high prevalence of psychological distress in survivors.Embedding these domains into standardized protocols could enhance both short-and long-term outcomes,particularly in highimpact trauma and disaster settings.
基金support from China National Natural Science Foundation (11672333)。
文摘The effectiveness of horizontal well multi-stage and multi-cluster fracturing in the fractured soft coal seam roof for coalbed methane(CBM) extraction has been demonstrated.This study focuses on the geological characteristics of the No.5 and No.11 coal seams in the Hancheng Block,Ordos Basin,China.A multi-functional,variable-size rock sample mold capable of securing the wellbore was developed to simulate layered formations comprising strata of varying lithology and thicknesses.A novel segmented fracturing simulation method based on an expandable pipe plugging technique is proposed.Large-scale true triaxial experiments were conducted to investigate the effects of horizontal wellbore location,perforation strategy,roof lithology,and vertical stress difference on fracture propagation,hydraulic energy variation,and the stimulated reservoir volume in horizontal wells targeting the soft coal seam roof.The results indicate that bilateral downward perforation with a phase angle of 120° optimizes hydraulic energy conservation,reduces operational costs,enhances fracture formation,and prevents fracturing failure caused by coal powder generation and migration.This perforation mode is thus considered optimal for coal seam roof fracturing.When the roof consists of sandstone,each perforation cluster tends to initiate a single dominant fracture with a regular geometry.In contrast,hydraulic fractures formed in mudstone roofs display diverse morphology.Due to its high strength,the sandstone roof requires significantly higher pressure for crack initiation and propagation,whereas the mudstone roof,with its strong water sensitivity,exhibits lower fracturing pressures.To mitigate inter-cluster interference,cluster spacing in mudstone roofs should be greater than that in sandstone roofs.Horizontal wellbore placement critically influences fracturing effectiveness.For indirect fracturing in sandstone roofs,an optimal position is 25 mm away from the lithological interface.In contrast,the optimal location for indirect fracturing in mudstone roofs is directly at the lithological interface with the coal seam.Higher vertical stress coefficients lead to increased fractu ring pressures and promote vertical,layer-penetrating fractures.A coefficient of 0.5 is identified as optimal for achieving effective indirect fracturing.This study provides valuable insights for the design and optimization of staged fracturing in horizontal wells targeting crushed soft coal seam roofs.
基金Projects(51874105,51674064,51734005)supported by the National Natural Science Foundation of ChinaProject(2018GXNSFAA281204)supported by the Guangxi Natural Science Foundation,China
文摘The effects of crushing energy, ore hardness and particle size of cassiterite polymetallic sulphide ore and lead-zinc polymetallic sulphide ore on the crushing characteristics during impact crushing were investigated by mineral liberation analyzer(MLA) and drop weight test. The results show that both ores contain pyrrhotite, sphalerite, jamesonite, gangue mica and quartz except cassiterite. Cassiterite is closely associated with sulphide and quartz to form aggregates, which are mixed with each other in the form of intergrowth or symbiotic disseminated fine grains. Cassiterite has a significant impact on ore crushing characteristics. Ore hardness is negatively correlated with the product of crushing parameters of A and b, i.e. A×b, the effect of crushing energy on crushing fineness is related to crushing parameters A and b, and the influence degree increases with the increase of A. The influence degree increases with the increase of b when crushing energy ECS is less than 1 kW·h/t, and the influence degree decreases with the increase of b when crushing energy ECS is greater than 1 kW·h/t. The impact of crushing energy on crushing fineness is greater than that of ore particle size when the crushing energy is lower;on the contrary, the impact of ore particle size on crushing fineness is greater than that of crushing energy when crushing energy is higher.
基金financially supported by Zonguldak Bülent Ecevit University(No.2016-98150330-01)
文摘Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and the manufacture of industrial crusher equipment. The main objective of this research is to quantify the crushability of hard rocks based on their mineralogical and mechanical properties. For this purpose, the mineralogical, physical, and mechanical properties of various hard rocks were determined. A new compressive crushing value(CCV) testing methodology was proposed. The results obtained from CCV tests were compared with those from mineralogical inspections, rock strength as well as mechanical aggregate tests. Strong correlations were found between CCV and several rock and aggregate properties such as uniaxial compressive strength(UCS), the brittleness index(S_(20)), and aggregate impact value(AIV). Furthermore, the relationship between the mineralogical properties of the rocks and their CCVs were established. It is concluded that the proposed testing methodology is simple and highly repeatable and could be utilized as a pre-design tool in the design stage of the crushing process for rock quarries.
文摘Double-layer, multi-roller plate crusher is a new device, that uses a multi-stage series crushing style to break particles, with the crushing ratio distribution directly influencing the machine＇s performance. Three crushing ratios of 2.25, 2.15 and 2.01, used for fuzzy physical programming, were determined. The comparison of the optimized result between the double-layer multi-roller plate crusher and a high pressure roll grinder showed that the double-layer multi-roller plate crusher had a better performance, reducing crushing force and wear.
文摘The influence of rock strength properties on Jaw Crusher performance was carried out to determine the effect of rock strength on crushing time and grain size distribution of the rocks.Investigation was conducted on four different rock samples namely marble,dolomite,limestone and granite which were representatively selected from fragmented lumps in quarries.Unconfined compressive strength and Point load tests were carried out on each rock sample as well as crushing time and size analysis.The results of the strength parameters of each sample were correlated with the crushing time and the grain size distribution of the rock types.The results of the strength tests show that granite has the highest mean value of 101.67 MPa for Unconfined Compressive Strength(UCS) test,6.43 MPa for Point Load test while dolomite has the least mean value of 30.56 MPa for UCS test and 0.95 MPa for Point Load test.According to the International Society for Rock Mechanic(ISRM) standard,the granite rock sample may be classified as having very high strength and dolomite rock sample,low strength.Also,the granite rock has the highest crushing time(21.0 s) and dolomite rock has the least value(5.0 s).Based on the results of the investigation,it was found out that there is a great influence of strength properties on crushing time of rock types.
