We here report a new CO_2 capture and storage method that converts CO_2 into a novel alkyl carbonate salt, denoted as CO_2 SM, by a system consisting of equimolar 1,4-butanediol(BDO) and 1,2-ethylenediamine(EDA). This...We here report a new CO_2 capture and storage method that converts CO_2 into a novel alkyl carbonate salt, denoted as CO_2 SM, by a system consisting of equimolar 1,4-butanediol(BDO) and 1,2-ethylenediamine(EDA). This novel CO_2 SM was then used to prepare BaCO_3 crystals through a simple and fast hydrothermal synthesis under mild conditions. The CO_2 SM was both the source of CO_2 and the modifier to regulate the nucleation and growth of BaCO_3 crystals. The morphology of the BaCO_3 crystals could be tuned from rod to shuttle by adjusting the key influencing factors, including CO_2 SM concentration, mineralization temperature, and mineralization time. A possible mechanism for the synthesis of BaCO_3 crystals from the CO_2 SM was also presented. After the BaCO_3 crystals were isolated, the filtrate of the hydrothermal reaction could be recycled to again absorb CO_2 and prepare BaCO_3 crystals of the same polymorph. This novel approach appears promising for preparing well-formed metal carbonates.展开更多
The growing global energy demand and worsening climate change highlight the urgent need for clean,efficient and sustainable energy solutions.Among emerging technologies,atomically thin two-dimensional(2D)materials off...The growing global energy demand and worsening climate change highlight the urgent need for clean,efficient and sustainable energy solutions.Among emerging technologies,atomically thin two-dimensional(2D)materials offer unique advantages in photovoltaics due to their tunable optoelectronic properties,high surface area and efficient charge transport capabilities.This review explores recent progress in photovoltaics incorporating 2D materials,focusing on their application as hole and electron transport layers to optimize bandgap alignment,enhance carrier mobility and improve chemical stability.A comprehensive analysis is presented on perovskite solar cells utilizing 2D materials,with a particular focus on strategies to enhance crystallization,passivate defects and improve overall cell efficiency.Additionally,the application of 2D materials in organic solar cells is examined,particularly for reducing recombination losses and enhancing charge extraction through work function modification.Their impact on dye-sensitized solar cells,including catalytic activity and counter electrode performance,is also explored.Finally,the review outlines key challenges,material limitations and performance metrics,offering insight into the future development of nextgeneration photovoltaic devices encouraged by 2D materials.展开更多
[ Objective ] The paper was to study the effect of controlled atmosphere stress of carbon dioxide （ CO2 ） on Superoxide dismutase （SOD） activity of in- sect, so as to analyze the biological mechanism of the action...[ Objective ] The paper was to study the effect of controlled atmosphere stress of carbon dioxide （ CO2 ） on Superoxide dismutase （SOD） activity of in- sect, so as to analyze the biological mechanism of the action of controlled atmosphere stress on insect. [ Method] Using nitrotetrazolium blue chloride （NBT） light reduction method, SOD activity of drugstore beetle （ Stegobium panlceum ）, cigarette beetle （ Lasioderma serricorne） and coffee bean beetle （Araecerus fasciculatus） was studied, and the stress response of the enzyme under controlled atmosphere stress of CO2 was analyzed. [ Result ] SOD activity of drugstore beetle, cigarette beetle and coffee bean beetle exposed to controlled atmosphere stress of high concentrations of CO2 for 3 and 6 h had certain degree of increase, and the activity sig- nificantly increased from 2.011±0.954,2.664±0.218 and 1.458±0.718 to 3. 135±0. 105,3.050±0.673 and 2.975±0.229 U/（per pest · 30 min） after treat- ment for 6 h. [ Conclusion] Controlled atmosphere stress of high concentrations of CO2 had certain activation effect on SOD activity of storage pest in Chinese me- dicinal material within the context of sub-lethal events. The results could enrich the insecticidal mechanism of controlled atmosphere and theoretical system of analy- sis on insect resistance to controlled atmosphere.展开更多
Rapid industrialization advancements have grabbed worldwide attention to integrate a very large number of electronic components into a smaller space for performing multifunctional operations.To fulfill the growing com...Rapid industrialization advancements have grabbed worldwide attention to integrate a very large number of electronic components into a smaller space for performing multifunctional operations.To fulfill the growing computing demand state-of-the-art materials are required for substituting traditional silicon and metal oxide semiconductors frameworks.Two-dimensional(2D)materials have shown their tremendous potential surpassing the limitations of conventional materials for developing smart devices.Despite their ground-breaking progress over the last two decades,systematic studies providing in-depth insights into the exciting physics of 2D materials are still lacking.Therefore,in this review,we discuss the importance of 2D materials in bridging the gap between conventional and advanced technologies due to their distinct statistical and quantum physics.Moreover,the inherent properties of these materials could easily be tailored to meet the specific requirements of smart devices.Hence,we discuss the physics of various 2D materials enabling them to fabricate smart devices.We also shed light on promising opportunities in developing smart devices and identified the formidable challenges that need to be addressed.展开更多
The chloride penetration resistance of cement-based grout materials was improved by nano-silica emulsion.Specimens of mixtures containing different nano-silica particles or emulsions were exposed in sodium chloride so...The chloride penetration resistance of cement-based grout materials was improved by nano-silica emulsion.Specimens of mixtures containing different nano-silica particles or emulsions were exposed in sodium chloride solutions of specific concentrations with different test ages.Hardened properties of the mixes were assessed in terms of weight loss and compressive strength.X-ray diffraction(XRD)and scanning electron microscopy(SEM)of mixes were performed to analysis the phase evolution and microstructure.The results demonstrated that the introduction of nano-SiO_(2) emulsion significantly decreased the compressive strength loss and calcium hydroxide(CH)crystal content of hydration production,and then enhanced the resistance of cement-based grouting materials to chloride ion penetration.This improvement derives from the filling and pozzolanic effects of nano-SiO_(2) particles,which were incorporated via an emulsion and attributed to a well dispersion in grouting matrix.展开更多
Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrat...Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.展开更多
Higher-order band topology not only enriches our understanding of topological phases but also unveils pioneering lower-dimensional boundary states,which harbors substantial potential for next-generation device applica...Higher-order band topology not only enriches our understanding of topological phases but also unveils pioneering lower-dimensional boundary states,which harbors substantial potential for next-generation device applications.The distinct electronic configurations and tunable attributes of two-dimensional materials position them as a quintessential platform for the realization of second-order topological insulators(SOTIs).This article provides an overview of the research progress in SOTIs within the field of two-dimensional electronic materials,focusing on the characterization of higher-order topological properties and the numerous candidate materials proposed in theoretical studies.These endeavors not only enhance our understanding of higher-order topological states but also highlight potential material systems that could be experimentally realized.展开更多
Na_(3)V_(2)(PO_(4))_(3)(NVP)has garnered great attentions as a prospective cathode material for sodium-ion batteries(SIBs)by virtue of its decent theoretical capacity,superior ion conductivity and high structural stab...Na_(3)V_(2)(PO_(4))_(3)(NVP)has garnered great attentions as a prospective cathode material for sodium-ion batteries(SIBs)by virtue of its decent theoretical capacity,superior ion conductivity and high structural stability.However,the inherently poor electronic conductivity and sluggish sodium-ion diffusion kinetics of NVP material give rise to inferior rate performance and unsatisfactory energy density,which strictly confine its further application in SIBs.Thus,it is of significance to boost the sodium storage performance of NVP cathode material.Up to now,many methods have been developed to optimize the electrochemical performance of NVP cathode material.In this review,the latest advances in optimization strategies for improving the electrochemical performance of NVP cathode material are well summarized and discussed,including carbon coating or modification,foreign-ion doping or substitution and nanostructure and morphology design.The foreign-ion doping or substitution is highlighted,involving Na,V,and PO_(4)^(3−)sites,which include single-site doping,multiple-site doping,single-ion doping,multiple-ion doping and so on.Furthermore,the challenges and prospects of high-performance NVP cathode material are also put forward.It is believed that this review can provide a useful reference for designing and developing high-performance NVP cathode material toward the large-scale application in SIBs.展开更多
A new adsorbent was successfully prepared by hydrothermal treatment and chemical activation through coal gasification fine slag(CGFS)and blue algae(BA)as raw materials and used for CO_(2)capture.The CO_(2)chemisorptio...A new adsorbent was successfully prepared by hydrothermal treatment and chemical activation through coal gasification fine slag(CGFS)and blue algae(BA)as raw materials and used for CO_(2)capture.The CO_(2)chemisorption capacity of the adsorbent was further enhanced by taking advantage of the nitrogenous bases contained in the BA.In the hydrothermal process,the addition of BA significantly increased the content of pyrrole nitrogen in the adsorbent.In the activation process,pyrrole nitrogen gradually changed into pyridine nitrogen and graphite nitrogen.Increased BA addition result in a higher specific surface area and microporosity of the adsorbent.The CO_(2)adsorption performance test proved that the CGFS-50%-CA sample has the strongest CO_(2)adsorption capacity at low temperature,up to 15.59 cm^(3)/g,which is mainly through physical adsorption,and the CGFS-10%-CA sample has the strongest CO_(2)adsorption capacity at high temperature,up to 7.31 cm^(3)/g,which is mainly through chemical adsorption.CO_(2)uptake of the CGFS-10%-CA sample was well maintained after 10 cycles,with regeneration efficiencies above 99%.The results indicate that the novel adsorbents with coexistence of physical and chemical adsorption have great potential for CO_(2)adsorption applications.展开更多
Two-dimensional(2D)materials are promising for next-generation electronic devices and systems due to their unique physical properties.The interfacial adhesion plays a vital role not only in the synthesis,transfer and ...Two-dimensional(2D)materials are promising for next-generation electronic devices and systems due to their unique physical properties.The interfacial adhesion plays a vital role not only in the synthesis,transfer and manipulation of 2D materials but also in the manufacture,integration and performance of the functional devices.However,the atomic thickness and limited lateral dimensions of 2D materials make the accurate measurement and modulation of their interfacial adhesion energy challenging.In this review,the recent advances in the measurement and modulation of the interfacial adhesion properties of 2D materials are systematically combed.Experimental methods and relative theoretical models for the adhesion measurement of 2D materials are summarized,with their scope of application and limitations discussed.The measured adhesion energies between 2D materials and various substrates are described in categories,where the typical adhesion modulation strategies of 2D materials are also introduced.Finally,the remaining challenges and opportunities for the interfacial adhesion measurement and modulation of 2D materials are presented.This paper provides guidance for addressing the adhesion issues in devices and systems involving 2D materials.展开更多
Herein,the effect of the Ru:Ni bimetallic composition in dual-function materials(DFMs)for the integrated CO_(2)capture and methanation process(ICCU-Methanation)is systematically evaluated and combined with a thorough ...Herein,the effect of the Ru:Ni bimetallic composition in dual-function materials(DFMs)for the integrated CO_(2)capture and methanation process(ICCU-Methanation)is systematically evaluated and combined with a thorough material characterization,as well as a mechanistic(in-situ diffuse reflectance infrared fourier-transform spectroscopy(in-situ DRIFTS))and computational(computational fluid dynamics(CFD)modelling)investigation,in order to improve the performance of Ni-based DFMs.The bimetallic DFMs are comprised of a main Ni active metallic phase(20 wt%)and are modified with low Ru loadings in the 0.1-1 wt%range(to keep the material cost low),supported on Na_(2)O/Al_(2)O_(3).It is shown that the addition of even a very low Ru loading(0.1-0.2 wt%)can drastically improve the material reducibility,exposing a significantly higher amount of surface-active metallic sites,with Ru being highly dispersed over the support and the Ni phase,while also forming some small Ru particles.This manifests in a significant enhancement in the CH_(4)yield and the CH_(4)production kinetics during ICCU-Methanation(which mainly proceeds via formate intermediates),with 0.2 wt%Ru addition leading to the best results.This bimetallic DFM also shows high stability and a relatively good performance under an oxidizing CO_(2)capture atmosphere.The formation rate of CH_(4)during hydrogenation is then further validated via CFD modelling and the developed model is subsequently applied in the prediction of the effect of other parameters,including the inlet H_(2)concentration,inlet flow rate,dual-fu nction material weight,and reactor internal diameter.展开更多
Two-dimensional (2D) materials have attracted significant attention as resistive switching materials for two-terminal non-volatile memory devices, often referred to as memristors, due to their potential for achieving ...Two-dimensional (2D) materials have attracted significant attention as resistive switching materials for two-terminal non-volatile memory devices, often referred to as memristors, due to their potential for achieving fast switching speeds and low power consumption. Their excellent gate tunability in electronic properties also enables hybrid devices combining the functionality of memory devices and transistors, with the possibility of realizing large-scale memristive crossbar arrays with high integration density. To facilitate the use of 2D materials in practical memristor applications, scalable synthesis of 2D materials with high electronic quality is critical. In addition, low-temperature integration for complementary metal oxide semiconductor (CMOS) back-end-of-line (BEOL) integration is important for embedded memory applications. Solution-based exfoliation has been actively explored as a facile, cost-effective method for the mass production and low-temperature integration of 2D materials. However, the films produced from the resulting 2D nanosheet dispersions exhibited poor electrical properties in the early stages of research, thereby hindering their use in electronic devices. Recent progress in the exfoliation process and post-processing has led to significant improvements in the electronic performance of solution-processed 2D materials, driving increased adoption of these materials in memristor research. In this review article, we provide a thorough overview of the progress and current status of memristive devices utilizing solution-processed 2D resistive switching layers. We begin by introducing the electrical characteristics and resistive switching mechanisms of memristors fabricated with conventional materials to lay the groundwork for understanding memristive behavior in 2D materials. Representative solution-based exfoliation and film formation techniques are also introduced, emphasizing the benefits of these approaches for obtaining scalable 2D material films compared to conventional methods such as mechanical exfoliation and chemical vapor deposition. Finally, we explore the electrical characteristics, resistive switching mechanisms, and applications of solution-processed 2D memristive devices, discussing their advantages and remaining challenges.展开更多
Hydrogen peroxide(H_(2)O_(2))is highly required in various applications.The development of catalysts exhibiting elevated catalytic activity,selectivity,and stability is essential for H_(2)O_(2)production technology.Me...Hydrogen peroxide(H_(2)O_(2))is highly required in various applications.The development of catalysts exhibiting elevated catalytic activity,selectivity,and stability is essential for H_(2)O_(2)production technology.Metalbased catalysts are widely used for 2e^(-)ORR(oxygen reduction reaction)because of their adjustable structure,chemical stability,and availability.However,due to competition with the 4e^(-)ORR,modifications are often conducted to balance activity and selectivity.Common techniques include altering the surface electronic structure of catalysts and the interaction between active sites and intermediates.This review discusses diverse catalyst types(including precious and transition metals,single-atom catalysts,and MOFs/COFs)along with modification strategies(such as morphological control,electronic structure tuning,conductivity enhancement,and wettability improvement).The objective is to elucidate catalyst design and associated reaction mechanisms,as well as the relationship between catalyst structure and activity,in order to provide an insight for producing H_(2)O_(2)in an efficient,highly selective,and stable manner.展开更多
The bulge test is a widely utilized method for assessing the mechanical properties of thin films,including metals,polymers,and semiconductors.However,as film thickness diminishes to nanometer scales,boundary condition...The bulge test is a widely utilized method for assessing the mechanical properties of thin films,including metals,polymers,and semiconductors.However,as film thickness diminishes to nanometer scales,boundary conditions dominated by weak van der Waals forces significantly impact mechanical responses.Instead of sample fracture,interfacial shear deformation and delamination become the primary deformation modes,thereby challenging the applicability of conventional bulge models.To accommodate the interfacial effect,a modified mechanical model based on the bulge test has been proposed.This review summarizes recent advancements in the bulge test to highlight the potential challenges and opportunities for future research.展开更多
With the rapid development of the internet of things(IoT)and wearable electronics,the role of flexible sensors is becoming increasingly irreplaceable,due to their ability to process and convert information acquisition...With the rapid development of the internet of things(IoT)and wearable electronics,the role of flexible sensors is becoming increasingly irreplaceable,due to their ability to process and convert information acquisition.Two-dimensional(2D)materials have been widely welcomed by researchers as sensitive layers,which broadens the range and application of flexible sensors due to the advantages of their large specific surface area,tunable energy bands,controllable thickness at the atomic level,stable mechanical properties,and excellent optoelectronic properties.This review focuses on five different types of 2D materials for monitoring pressure,humidity,sound,gas,and so on,to realize the recognition and conversion of human body and environmental signals.Meanwhile,the main problems and possible solutions of flexible sensors based on 2D materials as sensitive layers are summarized.展开更多
We propose and investigate a novel stable two-dimensional(2D)AlO_(2)with anomalous stoichiometric ratios based on first-principles calculation.2D AlO_(2)has metallic properties.It possesses the rare in-plane and out-o...We propose and investigate a novel stable two-dimensional(2D)AlO_(2)with anomalous stoichiometric ratios based on first-principles calculation.2D AlO_(2)has metallic properties.It possesses the rare in-plane and out-of-plane negative Poisson's ratio(NPR)phenomenon,originating from its special sawtooth-like structure.The absolute value of the NPR decreases as the number of layers increases.The adsorption of volatile organic compounds(VOCs)including CH_(2)O,C_(2)H_(3)Cl and C_(6)H_(6)by AlO_(2)exhibit small adsorption distance,large adsorption energy,large charge transfer and significant density of states(DOS)changes,indicating the presence of strong interactions.The desorption time of each gas molecule on the AlO_(2)surface is also evaluated,and the results further suggest that the desorption of VOCs can be controlled by changing the temperature to achieve the recycling of AlO_(2).These interesting properties make 2D AlO_(2)a promising material for electronic,mechanical and sensing applications for VOCs.展开更多
The electrochemical performance of layered O3-type NaCrO_(2)cathode material is significantly affected by the side reactions between NaCrO_(2)and electrolyte during sodium storage.A uniform Cr_(2)O_(3)coating layer wa...The electrochemical performance of layered O3-type NaCrO_(2)cathode material is significantly affected by the side reactions between NaCrO_(2)and electrolyte during sodium storage.A uniform Cr_(2)O_(3)coating layer was in situ constructed on the surface of NaCrO_(2)by controlling the excess ratio of sodium source.The structure,morphology,valence and electrochemical performance of the Cr_(2)O_(3)-coated NaCrO_(2)were characterized.The results indicate that the Cr_(2)O_(3)coating layer does not alter the crystal structure and morphology of NaCrO_(2),but effectively suppresses the side reactions between NaCrO_(2)and electrolyte,and improves the surface/interfacial stability of NaCrO_(2)material.The Cr_(2)O_(3)-coated NaCrO_(2)exhibits improved electrochemical performance with a capacity retention of 66.4%after 500 cycles at 10C.展开更多
Understanding the differences in CO_(2)adsorption in cementitious material is critical in mitigating the carbon footprint of the construction industry.This study chose the most common β-C_(2)S phase in the industry a...Understanding the differences in CO_(2)adsorption in cementitious material is critical in mitigating the carbon footprint of the construction industry.This study chose the most common β-C_(2)S phase in the industry as the cementitious material,selecting the β-C_(2)S(111)and β-C_(2)S(100)surfaces for CO_(2)adsorption.First-principles calculations were employed to systematically compare the CO_(2)ad-sorption behaviors on both surfaces focusing on adsorption energy,adsorption configurations,and surface reconstruction.The comparis-on of CO_(2)and H2O adsorption behaviors on the β-C_(2)S(111)surface was also conducted to shed light on the influence of CO_(2)on cement hydration.The adsorption energies of CO_(2)on the β-C_(2)S(111)and β-C_(2)S(100)surfaces were determined as-0.647 and-0.423 eV,respect-ively,suggesting that CO_(2)adsorption is more energetically favorable on the β-C_(2)S(111)surface than on the β-C_(2)S(100)surface.The ad-sorption energy of H2O on the β-C_(2)S(111)surface was-1.588 eV,which is 0.941 eV more negative than that of CO_(2),implying that β-C_(2)S tends to become hydrated before reacting with CO_(2).Bader charges,charge density differences,and the partial density of states were ap-plied to characterize the electronic properties of CO_(2)and H2O molecules and those of the surface atoms.The initial Ca/O sites on the β-C_(2)S(111)surface exhibited higher chemical reactivity due to the greater change in the average number of valence electrons in the CO_(2)ad-sorption.Specifically,after CO_(2)adsorption,the average number of valence electrons for both the Ca and O atoms increased by 0.002 on the β-C_(2)S(111)surface,while both decreased by 0.001 on the β-C_(2)S(100)surface.In addition,due to the lower valence electron number of O atoms,the chemical reactivity of O atoms on the β-C_(2)S(111)surface after H2O adsorption was higher than the case of CO_(2)adsorption,which favors the occurrence of further reactions.Overall,this work assessed the adsorption capacity of the β-C_(2)S surface for CO_(2)mo-lecules,offering a strong theoretical foundation for the design of novel cementitious materials for CO_(2)capture and storage.展开更多
Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity lim...Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity limit its wide application.Herein,coaxial nano-multilayered C/SnO_(2)/TiO_(2)composites were fabricated via layerby-layer self-assembly of TiO_(2)and SnO_(2)-gel layers on the natural cellulose filter paper,followed by thermal treatment under a nitrogen atmosphere.Through engineering design of the assembly process,the optimal C/SinO_(2)/TiO_(2)composite features five alternating SnO_(2)and TiO_(2)nanolayers,with TiO_(2)as the outside shell(denoted as C/TSTST).This unique structure endows the C/TSTST with excellent structural stability and electrochemical kinetics,making it a high-performance anode for lithium-ion batteries(LIBs).The C/TSTST composite delivers a high reversible capacity of 676 mAh g^(-1)at 0.1 A g^(-1)after 200 cycles and retains a capacity of 504 mAh g^(-1)at 1.0 A g^(-1),which can be recovered to 781 mAh g^(-1)at 0.1 A g^(-1)The significantly enhanced electrochemical performance is attributed to the hierarchical hybrid structure,where the carbon core combined with coaxial TiO_(2)nanolayers serves as a structural scaffold,ameliorating volume change of SnO_(2)while creating abundant interfacial defects for enhanced lithium storage and rapid charge transport.These findings are further demonstrated by the density functional theory(DFT)calculations.This work provides an efficient strategy for designing coaxial nano-multilayered transition metal oxide-related electrode materials,offering new insights into high-performance LIBs anodes.展开更多
Carbon-based materials have been widely applied for pollutant removal relying on their rich pore structure,functional groups,chemical stability,and expandability.However,the traditional manufacturing process of carbon...Carbon-based materials have been widely applied for pollutant removal relying on their rich pore structure,functional groups,chemical stability,and expandability.However,the traditional manufacturing process of carbon materials based on organic compounds pyrolysis is high energy-consuming and high-emission,which is not conducive to addressing the climate crisis and achieving the goal of carbon neutrality.Molten salt electrolysis technology enables the direct capture and reduction of CO_(2)to produce solid carbon,resulting in significant environmental benefits while achieving carbon emissions reduction.The molten salt also has a purification function,enabling the production of high-purity carbon materials.The kinetics of the electrochemical reduction process can be easily controlled,and the co-reduction of multiple elements provides convenience for the in-situ optimization of carbon material structure and the expansion of its applications.Therefore,this review focuses on the thermodynamics&kinetics processes of molten salt capture and electrochemical reduction of CO_(2)to prepare carbon materials.It further reviews the recent research progress on the preparation of carbon materials for pollutant removal based on molten salt electrochemical processes for the first time.Finally,we analyze the advantages and challenges of the current molten salt electrochemical processes and offers prospects for future research directions.展开更多
基金supported by the National Natural Science Foundation of China(21666027)Program for New Century Excellent Talents in University(NCET-12-1017)+4 种基金the Natural Science Foundation of Inner Mongolia Autonomous Region(2016JQ02)Key Laboratory of Coal-based CO2 Capture and Geological Storage(Jiangsu Province,China University of Mining and Technology,2016A06)the Program for Grassland Excellent Talents of Inner Mongolia Autonomous Regionthe Inner Mongolia Science and Technology Key Projectstraining plan of academic backbone in youth of Inner Mongolia University of Technology
文摘We here report a new CO_2 capture and storage method that converts CO_2 into a novel alkyl carbonate salt, denoted as CO_2 SM, by a system consisting of equimolar 1,4-butanediol(BDO) and 1,2-ethylenediamine(EDA). This novel CO_2 SM was then used to prepare BaCO_3 crystals through a simple and fast hydrothermal synthesis under mild conditions. The CO_2 SM was both the source of CO_2 and the modifier to regulate the nucleation and growth of BaCO_3 crystals. The morphology of the BaCO_3 crystals could be tuned from rod to shuttle by adjusting the key influencing factors, including CO_2 SM concentration, mineralization temperature, and mineralization time. A possible mechanism for the synthesis of BaCO_3 crystals from the CO_2 SM was also presented. After the BaCO_3 crystals were isolated, the filtrate of the hydrothermal reaction could be recycled to again absorb CO_2 and prepare BaCO_3 crystals of the same polymorph. This novel approach appears promising for preparing well-formed metal carbonates.
基金supported by the IITP(Institute of Information & Communications Technology Planning & Evaluation)-ITRC(Information Technology Research Center) grant funded by the Korea government(Ministry of Science and ICT) (IITP-2025-RS-2024-00437191, and RS-2025-02303505)partly supported by the Korea Basic Science Institute (National Research Facilities and Equipment Center) grant funded by the Ministry of Education. (No. 2022R1A6C101A774)the Deanship of Research and Graduate Studies at King Khalid University, Saudi Arabia, through Large Research Project under grant number RGP-2/527/46
文摘The growing global energy demand and worsening climate change highlight the urgent need for clean,efficient and sustainable energy solutions.Among emerging technologies,atomically thin two-dimensional(2D)materials offer unique advantages in photovoltaics due to their tunable optoelectronic properties,high surface area and efficient charge transport capabilities.This review explores recent progress in photovoltaics incorporating 2D materials,focusing on their application as hole and electron transport layers to optimize bandgap alignment,enhance carrier mobility and improve chemical stability.A comprehensive analysis is presented on perovskite solar cells utilizing 2D materials,with a particular focus on strategies to enhance crystallization,passivate defects and improve overall cell efficiency.Additionally,the application of 2D materials in organic solar cells is examined,particularly for reducing recombination losses and enhancing charge extraction through work function modification.Their impact on dye-sensitized solar cells,including catalytic activity and counter electrode performance,is also explored.Finally,the review outlines key challenges,material limitations and performance metrics,offering insight into the future development of nextgeneration photovoltaic devices encouraged by 2D materials.
基金Supported by Project of Guizhou Provincial Modernization of Chinese Medicine Material Project(QKHYZ[2011]5049Organization Department of CPCGuizhou Committee(TZJF-2009-02)Promotion Project of Key Scientific and Technological Achievements of Guiyang City([2010]1-T-4)~~
文摘[ Objective ] The paper was to study the effect of controlled atmosphere stress of carbon dioxide （ CO2 ） on Superoxide dismutase （SOD） activity of in- sect, so as to analyze the biological mechanism of the action of controlled atmosphere stress on insect. [ Method] Using nitrotetrazolium blue chloride （NBT） light reduction method, SOD activity of drugstore beetle （ Stegobium panlceum ）, cigarette beetle （ Lasioderma serricorne） and coffee bean beetle （Araecerus fasciculatus） was studied, and the stress response of the enzyme under controlled atmosphere stress of CO2 was analyzed. [ Result ] SOD activity of drugstore beetle, cigarette beetle and coffee bean beetle exposed to controlled atmosphere stress of high concentrations of CO2 for 3 and 6 h had certain degree of increase, and the activity sig- nificantly increased from 2.011±0.954,2.664±0.218 and 1.458±0.718 to 3. 135±0. 105,3.050±0.673 and 2.975±0.229 U/（per pest · 30 min） after treat- ment for 6 h. [ Conclusion] Controlled atmosphere stress of high concentrations of CO2 had certain activation effect on SOD activity of storage pest in Chinese me- dicinal material within the context of sub-lethal events. The results could enrich the insecticidal mechanism of controlled atmosphere and theoretical system of analy- sis on insect resistance to controlled atmosphere.
文摘Rapid industrialization advancements have grabbed worldwide attention to integrate a very large number of electronic components into a smaller space for performing multifunctional operations.To fulfill the growing computing demand state-of-the-art materials are required for substituting traditional silicon and metal oxide semiconductors frameworks.Two-dimensional(2D)materials have shown their tremendous potential surpassing the limitations of conventional materials for developing smart devices.Despite their ground-breaking progress over the last two decades,systematic studies providing in-depth insights into the exciting physics of 2D materials are still lacking.Therefore,in this review,we discuss the importance of 2D materials in bridging the gap between conventional and advanced technologies due to their distinct statistical and quantum physics.Moreover,the inherent properties of these materials could easily be tailored to meet the specific requirements of smart devices.Hence,we discuss the physics of various 2D materials enabling them to fabricate smart devices.We also shed light on promising opportunities in developing smart devices and identified the formidable challenges that need to be addressed.
基金Funded by a Science and Technology Project from the Ministry of Housing and Urban-Rural Development of the People’s Republic of China(No.2019-K-047)Yangzhou Government-Yangzhou University Cooperative Platform Project for Science and Technology Innovation(No.YZ2020262)。
文摘The chloride penetration resistance of cement-based grout materials was improved by nano-silica emulsion.Specimens of mixtures containing different nano-silica particles or emulsions were exposed in sodium chloride solutions of specific concentrations with different test ages.Hardened properties of the mixes were assessed in terms of weight loss and compressive strength.X-ray diffraction(XRD)and scanning electron microscopy(SEM)of mixes were performed to analysis the phase evolution and microstructure.The results demonstrated that the introduction of nano-SiO_(2) emulsion significantly decreased the compressive strength loss and calcium hydroxide(CH)crystal content of hydration production,and then enhanced the resistance of cement-based grouting materials to chloride ion penetration.This improvement derives from the filling and pozzolanic effects of nano-SiO_(2) particles,which were incorporated via an emulsion and attributed to a well dispersion in grouting matrix.
基金the National Key R&D Program of China(2022YFA1505200)the National Natural Science Foundation of China(22472140,22021001)the Fundamental Research Funds for the Central Universities(20720210017 and 20720210009)。
文摘Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.
基金supported by the National Natu-ral Science Foundation of China(Grants No.12174220 and No.12074217)the Shandong Provincial Science Foundation for Excellent Young Scholars(Grant No.ZR2023YQ001)+1 种基金the Taishan Young Scholar Program of Shandong Provincethe Qilu Young Scholar Pro-gram of Shandong University.
文摘Higher-order band topology not only enriches our understanding of topological phases but also unveils pioneering lower-dimensional boundary states,which harbors substantial potential for next-generation device applications.The distinct electronic configurations and tunable attributes of two-dimensional materials position them as a quintessential platform for the realization of second-order topological insulators(SOTIs).This article provides an overview of the research progress in SOTIs within the field of two-dimensional electronic materials,focusing on the characterization of higher-order topological properties and the numerous candidate materials proposed in theoretical studies.These endeavors not only enhance our understanding of higher-order topological states but also highlight potential material systems that could be experimentally realized.
基金partly supported by the National Natural Science Foundation of China(Grant No.52272225).
文摘Na_(3)V_(2)(PO_(4))_(3)(NVP)has garnered great attentions as a prospective cathode material for sodium-ion batteries(SIBs)by virtue of its decent theoretical capacity,superior ion conductivity and high structural stability.However,the inherently poor electronic conductivity and sluggish sodium-ion diffusion kinetics of NVP material give rise to inferior rate performance and unsatisfactory energy density,which strictly confine its further application in SIBs.Thus,it is of significance to boost the sodium storage performance of NVP cathode material.Up to now,many methods have been developed to optimize the electrochemical performance of NVP cathode material.In this review,the latest advances in optimization strategies for improving the electrochemical performance of NVP cathode material are well summarized and discussed,including carbon coating or modification,foreign-ion doping or substitution and nanostructure and morphology design.The foreign-ion doping or substitution is highlighted,involving Na,V,and PO_(4)^(3−)sites,which include single-site doping,multiple-site doping,single-ion doping,multiple-ion doping and so on.Furthermore,the challenges and prospects of high-performance NVP cathode material are also put forward.It is believed that this review can provide a useful reference for designing and developing high-performance NVP cathode material toward the large-scale application in SIBs.
基金supported by the National Natural Science Foundation of China(22168032)the National Key Research and Development Program of China(2023YFC3904302,2023YFB4103500)the Key Projects of Ning Dong Energy and Chemical Industry Base(2023NDKJXMLX022).
文摘A new adsorbent was successfully prepared by hydrothermal treatment and chemical activation through coal gasification fine slag(CGFS)and blue algae(BA)as raw materials and used for CO_(2)capture.The CO_(2)chemisorption capacity of the adsorbent was further enhanced by taking advantage of the nitrogenous bases contained in the BA.In the hydrothermal process,the addition of BA significantly increased the content of pyrrole nitrogen in the adsorbent.In the activation process,pyrrole nitrogen gradually changed into pyridine nitrogen and graphite nitrogen.Increased BA addition result in a higher specific surface area and microporosity of the adsorbent.The CO_(2)adsorption performance test proved that the CGFS-50%-CA sample has the strongest CO_(2)adsorption capacity at low temperature,up to 15.59 cm^(3)/g,which is mainly through physical adsorption,and the CGFS-10%-CA sample has the strongest CO_(2)adsorption capacity at high temperature,up to 7.31 cm^(3)/g,which is mainly through chemical adsorption.CO_(2)uptake of the CGFS-10%-CA sample was well maintained after 10 cycles,with regeneration efficiencies above 99%.The results indicate that the novel adsorbents with coexistence of physical and chemical adsorption have great potential for CO_(2)adsorption applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.12002133,12372109,and 11972171)the Natural Science Foundation of Jiangsu Province(Grant Nos.BK20200590 and BK20180031)+4 种基金the Fundamental Research Funds for the Central Universities(Grant No.JUSRP121040)the National Key R&D Program of China(Grant No.2023YFB4605101)the 111 project(Grant No.B18027)the Open Fund of Key Laboratory for Intelligent Nano Materials and Devices of the Ministry of Education(Grant No.NJ2020003)the Sixth Phase of Jiangsu Province“333 High Level Talent Training Project”Second Level Talents.
文摘Two-dimensional(2D)materials are promising for next-generation electronic devices and systems due to their unique physical properties.The interfacial adhesion plays a vital role not only in the synthesis,transfer and manipulation of 2D materials but also in the manufacture,integration and performance of the functional devices.However,the atomic thickness and limited lateral dimensions of 2D materials make the accurate measurement and modulation of their interfacial adhesion energy challenging.In this review,the recent advances in the measurement and modulation of the interfacial adhesion properties of 2D materials are systematically combed.Experimental methods and relative theoretical models for the adhesion measurement of 2D materials are summarized,with their scope of application and limitations discussed.The measured adhesion energies between 2D materials and various substrates are described in categories,where the typical adhesion modulation strategies of 2D materials are also introduced.Finally,the remaining challenges and opportunities for the interfacial adhesion measurement and modulation of 2D materials are presented.This paper provides guidance for addressing the adhesion issues in devices and systems involving 2D materials.
基金support of this work by the project“Development of new innovative low carbon energy technologies to improve excellence in the Region of Western Macedonia”(MIS 5047197),which is implemented under the Action“Reinforcement of the Research and Innovation Infrastructure”funded by the Operational Program“Competitiveness,Entrepreneurship and Innovation”(NSRF 2014-2020)co-financed by Greece and the European Union(European Regional Development Fund)+4 种基金the Hellenic Foundation for Research and Innovation(HFRI)for supporting this research work under the 3~(rd)Call for HFRI PhD Fellowships(Fellowship Number:6033)the support of ELECMI-LMA nodeNanbiosis ICTSsfunded by the Swiss National Science Foundation(Grant:206021_189629)the Research Council of Norway(Grant:296087)。
文摘Herein,the effect of the Ru:Ni bimetallic composition in dual-function materials(DFMs)for the integrated CO_(2)capture and methanation process(ICCU-Methanation)is systematically evaluated and combined with a thorough material characterization,as well as a mechanistic(in-situ diffuse reflectance infrared fourier-transform spectroscopy(in-situ DRIFTS))and computational(computational fluid dynamics(CFD)modelling)investigation,in order to improve the performance of Ni-based DFMs.The bimetallic DFMs are comprised of a main Ni active metallic phase(20 wt%)and are modified with low Ru loadings in the 0.1-1 wt%range(to keep the material cost low),supported on Na_(2)O/Al_(2)O_(3).It is shown that the addition of even a very low Ru loading(0.1-0.2 wt%)can drastically improve the material reducibility,exposing a significantly higher amount of surface-active metallic sites,with Ru being highly dispersed over the support and the Ni phase,while also forming some small Ru particles.This manifests in a significant enhancement in the CH_(4)yield and the CH_(4)production kinetics during ICCU-Methanation(which mainly proceeds via formate intermediates),with 0.2 wt%Ru addition leading to the best results.This bimetallic DFM also shows high stability and a relatively good performance under an oxidizing CO_(2)capture atmosphere.The formation rate of CH_(4)during hydrogenation is then further validated via CFD modelling and the developed model is subsequently applied in the prediction of the effect of other parameters,including the inlet H_(2)concentration,inlet flow rate,dual-fu nction material weight,and reactor internal diameter.
基金supported by the National Research Foundation(NRF)Grant funded by the Korean government(MSIT)(Nos.RS-2023-00208538,RS-2024-00411904,and RS-2023-00237308).
文摘Two-dimensional (2D) materials have attracted significant attention as resistive switching materials for two-terminal non-volatile memory devices, often referred to as memristors, due to their potential for achieving fast switching speeds and low power consumption. Their excellent gate tunability in electronic properties also enables hybrid devices combining the functionality of memory devices and transistors, with the possibility of realizing large-scale memristive crossbar arrays with high integration density. To facilitate the use of 2D materials in practical memristor applications, scalable synthesis of 2D materials with high electronic quality is critical. In addition, low-temperature integration for complementary metal oxide semiconductor (CMOS) back-end-of-line (BEOL) integration is important for embedded memory applications. Solution-based exfoliation has been actively explored as a facile, cost-effective method for the mass production and low-temperature integration of 2D materials. However, the films produced from the resulting 2D nanosheet dispersions exhibited poor electrical properties in the early stages of research, thereby hindering their use in electronic devices. Recent progress in the exfoliation process and post-processing has led to significant improvements in the electronic performance of solution-processed 2D materials, driving increased adoption of these materials in memristor research. In this review article, we provide a thorough overview of the progress and current status of memristive devices utilizing solution-processed 2D resistive switching layers. We begin by introducing the electrical characteristics and resistive switching mechanisms of memristors fabricated with conventional materials to lay the groundwork for understanding memristive behavior in 2D materials. Representative solution-based exfoliation and film formation techniques are also introduced, emphasizing the benefits of these approaches for obtaining scalable 2D material films compared to conventional methods such as mechanical exfoliation and chemical vapor deposition. Finally, we explore the electrical characteristics, resistive switching mechanisms, and applications of solution-processed 2D memristive devices, discussing their advantages and remaining challenges.
基金financially supported by the National Natural Science Foundation of China(Nos.22466011 and 22165004)the Innovative Research Team for Science and Technology of Shanxi Province(No.2022TD-04)。
文摘Hydrogen peroxide(H_(2)O_(2))is highly required in various applications.The development of catalysts exhibiting elevated catalytic activity,selectivity,and stability is essential for H_(2)O_(2)production technology.Metalbased catalysts are widely used for 2e^(-)ORR(oxygen reduction reaction)because of their adjustable structure,chemical stability,and availability.However,due to competition with the 4e^(-)ORR,modifications are often conducted to balance activity and selectivity.Common techniques include altering the surface electronic structure of catalysts and the interaction between active sites and intermediates.This review discusses diverse catalyst types(including precious and transition metals,single-atom catalysts,and MOFs/COFs)along with modification strategies(such as morphological control,electronic structure tuning,conductivity enhancement,and wettability improvement).The objective is to elucidate catalyst design and associated reaction mechanisms,as well as the relationship between catalyst structure and activity,in order to provide an insight for producing H_(2)O_(2)in an efficient,highly selective,and stable manner.
基金supported by the National Natural Science Foundation of China(Grant Nos.22072031,12372107,11832010,and 11890682)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB36000000).
文摘The bulge test is a widely utilized method for assessing the mechanical properties of thin films,including metals,polymers,and semiconductors.However,as film thickness diminishes to nanometer scales,boundary conditions dominated by weak van der Waals forces significantly impact mechanical responses.Instead of sample fracture,interfacial shear deformation and delamination become the primary deformation modes,thereby challenging the applicability of conventional bulge models.To accommodate the interfacial effect,a modified mechanical model based on the bulge test has been proposed.This review summarizes recent advancements in the bulge test to highlight the potential challenges and opportunities for future research.
基金support of National Natural Science Foundation of China(Nos.52192610,62422120,52371202,52203307,52125205,52202181,and 52102184)Natural Science Foundation of Beijing(Nos.L223006 and 2222088).
文摘With the rapid development of the internet of things(IoT)and wearable electronics,the role of flexible sensors is becoming increasingly irreplaceable,due to their ability to process and convert information acquisition.Two-dimensional(2D)materials have been widely welcomed by researchers as sensitive layers,which broadens the range and application of flexible sensors due to the advantages of their large specific surface area,tunable energy bands,controllable thickness at the atomic level,stable mechanical properties,and excellent optoelectronic properties.This review focuses on five different types of 2D materials for monitoring pressure,humidity,sound,gas,and so on,to realize the recognition and conversion of human body and environmental signals.Meanwhile,the main problems and possible solutions of flexible sensors based on 2D materials as sensitive layers are summarized.
基金financially supported by National Natural Science Foundation of China(No.22275149)Fundamental Research Funds for the Central Universities(No.SWU118105)the Next-Generation Advanced Energy Materials Program of BatteroTech Co.,Ltd.
文摘We propose and investigate a novel stable two-dimensional(2D)AlO_(2)with anomalous stoichiometric ratios based on first-principles calculation.2D AlO_(2)has metallic properties.It possesses the rare in-plane and out-of-plane negative Poisson's ratio(NPR)phenomenon,originating from its special sawtooth-like structure.The absolute value of the NPR decreases as the number of layers increases.The adsorption of volatile organic compounds(VOCs)including CH_(2)O,C_(2)H_(3)Cl and C_(6)H_(6)by AlO_(2)exhibit small adsorption distance,large adsorption energy,large charge transfer and significant density of states(DOS)changes,indicating the presence of strong interactions.The desorption time of each gas molecule on the AlO_(2)surface is also evaluated,and the results further suggest that the desorption of VOCs can be controlled by changing the temperature to achieve the recycling of AlO_(2).These interesting properties make 2D AlO_(2)a promising material for electronic,mechanical and sensing applications for VOCs.
基金supported by the Scientific Research Fund of Hunan Provincial Education Department,China(No.22B0741)。
文摘The electrochemical performance of layered O3-type NaCrO_(2)cathode material is significantly affected by the side reactions between NaCrO_(2)and electrolyte during sodium storage.A uniform Cr_(2)O_(3)coating layer was in situ constructed on the surface of NaCrO_(2)by controlling the excess ratio of sodium source.The structure,morphology,valence and electrochemical performance of the Cr_(2)O_(3)-coated NaCrO_(2)were characterized.The results indicate that the Cr_(2)O_(3)coating layer does not alter the crystal structure and morphology of NaCrO_(2),but effectively suppresses the side reactions between NaCrO_(2)and electrolyte,and improves the surface/interfacial stability of NaCrO_(2)material.The Cr_(2)O_(3)-coated NaCrO_(2)exhibits improved electrochemical performance with a capacity retention of 66.4%after 500 cycles at 10C.
基金financially supported by the Natural Sci-ence Foundation of Hunan Province,China(No.2024JJ2074)National Natural Science Foundation of China(No.22376221)+2 种基金Young Elite Scientists Sponsorship Pro-gram by the China Association for Science and Technology(CAST)(No.2023QNRC001)partly supported by the High Performance Computing Center of Central South University,Chinasupported by resources provided by the Pawsey Supercomputing Centre with funding from the Australian Government and the Government of Western Australia.
文摘Understanding the differences in CO_(2)adsorption in cementitious material is critical in mitigating the carbon footprint of the construction industry.This study chose the most common β-C_(2)S phase in the industry as the cementitious material,selecting the β-C_(2)S(111)and β-C_(2)S(100)surfaces for CO_(2)adsorption.First-principles calculations were employed to systematically compare the CO_(2)ad-sorption behaviors on both surfaces focusing on adsorption energy,adsorption configurations,and surface reconstruction.The comparis-on of CO_(2)and H2O adsorption behaviors on the β-C_(2)S(111)surface was also conducted to shed light on the influence of CO_(2)on cement hydration.The adsorption energies of CO_(2)on the β-C_(2)S(111)and β-C_(2)S(100)surfaces were determined as-0.647 and-0.423 eV,respect-ively,suggesting that CO_(2)adsorption is more energetically favorable on the β-C_(2)S(111)surface than on the β-C_(2)S(100)surface.The ad-sorption energy of H2O on the β-C_(2)S(111)surface was-1.588 eV,which is 0.941 eV more negative than that of CO_(2),implying that β-C_(2)S tends to become hydrated before reacting with CO_(2).Bader charges,charge density differences,and the partial density of states were ap-plied to characterize the electronic properties of CO_(2)and H2O molecules and those of the surface atoms.The initial Ca/O sites on the β-C_(2)S(111)surface exhibited higher chemical reactivity due to the greater change in the average number of valence electrons in the CO_(2)ad-sorption.Specifically,after CO_(2)adsorption,the average number of valence electrons for both the Ca and O atoms increased by 0.002 on the β-C_(2)S(111)surface,while both decreased by 0.001 on the β-C_(2)S(100)surface.In addition,due to the lower valence electron number of O atoms,the chemical reactivity of O atoms on the β-C_(2)S(111)surface after H2O adsorption was higher than the case of CO_(2)adsorption,which favors the occurrence of further reactions.Overall,this work assessed the adsorption capacity of the β-C_(2)S surface for CO_(2)mo-lecules,offering a strong theoretical foundation for the design of novel cementitious materials for CO_(2)capture and storage.
基金financially supported by the National Natural Science Foundation of China(Nos.22302133 and 22405161)Central Guidance on Local Science and Technology Development Fund of Hebei Province,China(No.236Z4406G)+5 种基金the Natural Science Foundation of Hebei Education Department,China(No.BJ2025100)the Natural Science Foundation of Hebei Province,China(No.B2021210001)the Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2024D01A157)the Key R&D Plan of Karamay(No.2024zdyf0009)Karamay Innovation Environment Construction Plan(Innovative Talents)Project(No.2024hjcxrc0029)the Research Foundation of China University of Petroleum-Beijing at Karamay(No.XQZX20240023)
文摘Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity limit its wide application.Herein,coaxial nano-multilayered C/SnO_(2)/TiO_(2)composites were fabricated via layerby-layer self-assembly of TiO_(2)and SnO_(2)-gel layers on the natural cellulose filter paper,followed by thermal treatment under a nitrogen atmosphere.Through engineering design of the assembly process,the optimal C/SinO_(2)/TiO_(2)composite features five alternating SnO_(2)and TiO_(2)nanolayers,with TiO_(2)as the outside shell(denoted as C/TSTST).This unique structure endows the C/TSTST with excellent structural stability and electrochemical kinetics,making it a high-performance anode for lithium-ion batteries(LIBs).The C/TSTST composite delivers a high reversible capacity of 676 mAh g^(-1)at 0.1 A g^(-1)after 200 cycles and retains a capacity of 504 mAh g^(-1)at 1.0 A g^(-1),which can be recovered to 781 mAh g^(-1)at 0.1 A g^(-1)The significantly enhanced electrochemical performance is attributed to the hierarchical hybrid structure,where the carbon core combined with coaxial TiO_(2)nanolayers serves as a structural scaffold,ameliorating volume change of SnO_(2)while creating abundant interfacial defects for enhanced lithium storage and rapid charge transport.These findings are further demonstrated by the density functional theory(DFT)calculations.This work provides an efficient strategy for designing coaxial nano-multilayered transition metal oxide-related electrode materials,offering new insights into high-performance LIBs anodes.
基金supported by the National Natural Science Foundation of China(Nos.52200143,51979011 and 52276208)the Natural Science Foundation of Hubei Province(No.2024AFB546)the Fundamental Research Funds for Central Public Welfare Research Institutes(Nos.CKSF2023302/CL and CKSF2023314/CL).
文摘Carbon-based materials have been widely applied for pollutant removal relying on their rich pore structure,functional groups,chemical stability,and expandability.However,the traditional manufacturing process of carbon materials based on organic compounds pyrolysis is high energy-consuming and high-emission,which is not conducive to addressing the climate crisis and achieving the goal of carbon neutrality.Molten salt electrolysis technology enables the direct capture and reduction of CO_(2)to produce solid carbon,resulting in significant environmental benefits while achieving carbon emissions reduction.The molten salt also has a purification function,enabling the production of high-purity carbon materials.The kinetics of the electrochemical reduction process can be easily controlled,and the co-reduction of multiple elements provides convenience for the in-situ optimization of carbon material structure and the expansion of its applications.Therefore,this review focuses on the thermodynamics&kinetics processes of molten salt capture and electrochemical reduction of CO_(2)to prepare carbon materials.It further reviews the recent research progress on the preparation of carbon materials for pollutant removal based on molten salt electrochemical processes for the first time.Finally,we analyze the advantages and challenges of the current molten salt electrochemical processes and offers prospects for future research directions.
