In this paper,an advanced satellite navigation filter design,referred to as the Variational Bayesian Maximum Correntropy Extended Kalman Filter(VBMCEKF),is introduced to enhance robustness and adaptability in scenario...In this paper,an advanced satellite navigation filter design,referred to as the Variational Bayesian Maximum Correntropy Extended Kalman Filter(VBMCEKF),is introduced to enhance robustness and adaptability in scenarios with non-Gaussian noise and heavy-tailed outliers.The proposed design modifies the extended Kalman filter(EKF)for the global navigation satellite system(GNSS),integrating the maximum correntropy criterion(MCC)and the variational Bayesian(VB)method.This adaptive algorithm effectively reduces non-line-of-sight(NLOS)reception contamination and improves estimation accuracy,particularly in time-varying GNSS measurements.Experimental results show that the proposed method significantly outperforms conventional approaches in estimation accuracy under heavy-tailed outliers and non-Gaussian noise.By combining MCC with VB approximation for real-time noise covariance estimation using fixed-point iteration,the VBMCEKF achieves superior filtering performance in challenging GNSS conditions.The method’s adaptability and precision make it ideal for improving satellite navigation performance in stochastic environments.展开更多
In the past few decades,the navigation performance of ships and structures in ice-covered waters has not been fully studied,especially the influence of ice mechanical properties on icebreaking ability.Ice bending stre...In the past few decades,the navigation performance of ships and structures in ice-covered waters has not been fully studied,especially the influence of ice mechanical properties on icebreaking ability.Ice bending strength is a key ice parameter for predicting ship ice loads,and accurate ice bending strength is also the key to scaling model tests results to real ship.However,numerical simulation studies on model ice bending strength of ice tanks are often neglected.In this paper,an explicit finite element method model is used to simulate the ice cantilever beam test,and the failure load and bending strength of the ice are obtained.In this model,the Tsai-Wu failure criterion is used as the material constitutive model,and the required simulation parameters are obtained from the model ice test in ice tank.Parameter sensitivity analysis shows that the cantilever beam size of the model ice has a significant effect on the flexural strength.The results show that proper rounding at the root of the cantilever beam is beneficial to reduce stress concentration and obtain more accurate bending strength;the thickness,width and length of the cantilever beam should conform to a certain ratio,and consistent with the ITTC recommended reference.Therefore,the results of this study can promote model ice experiments and numerical studies and provide ice strength data support for ship design and polar ship maneuvering.展开更多
Ground reinforcement is crucial for tunnel construction, especially in soft rock tunnels. Existing analytical models are inadequate for predicting the ground reaction curves (GRCs) for reinforced tunnels in strain-sof...Ground reinforcement is crucial for tunnel construction, especially in soft rock tunnels. Existing analytical models are inadequate for predicting the ground reaction curves (GRCs) for reinforced tunnels in strain-softening (SS) rock masses. This study proposes a novel analytical model to determine the GRCs of SS rock masses, incorporating ground reinforcement and intermediate principal stress (IPS). The SS constitutive model captures the progressive post- peak failure, while the elastic-brittle model simulates reinforced rock masses. Nine combined states are innovatively investigated to analyze plastic zone development in natural and reinforced regions. Each region is analyzed separately, and coupled through boundary conditions at interface. Comparison with three types of existing models indicates that these models overestimate reinforcement effects. The deformation prediction errors of single geological material models may exceed 75%. Furthermore, neglecting softening and residual zones in natural regions could lead to errors over 50%. Considering the IPS can effectively utilize the rock strength to reduce tunnel deformation by at least 30%, thereby saving on reinforcement and support costs. The computational results show a satisfactory agreement with the monitoring data from a model test and two tunnel projects. The proposed model may offer valuable insights into the design and construction of reinforced tunnel engineering.展开更多
The swinging-loading process is essential for automatic artillery loading systems.This study focuses on the problems of reliability analysis that affect swinging-loading positioning accuracy.A dynamic model for a mult...The swinging-loading process is essential for automatic artillery loading systems.This study focuses on the problems of reliability analysis that affect swinging-loading positioning accuracy.A dynamic model for a multi degree-of-freedom swinging-loading-integrated rigid-flexible coupling system is established.This model is based on the identification of key parameters and platform experiments.Based on the spatial geometric relationship between the breech and loader during modular charge transfer and the possible maximum interference depth of the modular charge,a new failure criterion for estimating the reliability of swinging-loading positioning accuracy is proposed.Considering the uncertainties in the operation of the pendulum loader,the direct probability integration method is introduced to analyze the reliability of the swinging-loading positioning accuracy under three different charge numbers.The results indicate that under two and four charges,the swinging-loading process shows outstanding reliability.However,an unstable stage appears when the swinging motion occurred under six charges,with a maximum positioning failure probability of 0.0712.A comparison between the results obtained under the conventional and proposed criteria further reveals the effectiveness and necessity of the proposed criterion.展开更多
Hydraulic fracture(HF)formed in rock significantly helps with the development of geo-energy and georesources.The HF formation condition was challenging to understand,with obscure rock micro-cracking mechanisms being a...Hydraulic fracture(HF)formed in rock significantly helps with the development of geo-energy and georesources.The HF formation condition was challenging to understand,with obscure rock micro-cracking mechanisms being a key factor.The rock micro-cracking mechanism under gradient pore water pressure was analyzed on the scale of mineral particles and it was combined with macroscopic boundary conditions of rock hydraulic fracturing,obtaining the propagation criterion of HF in rock based on the rock micro-cracking mechanism which was verified by experiment.The results show that the disturbed skeleton stress induced by the disturbance of gradient pore water pressure in rock equals the pore water pressure difference.The overall range of the defined mechanical shape factor a/b is around 1,but greater than0.5.Under the combined influence of pore water pressure differences and macroscopic boundary stresses on the rock micro-cracking,micro-cracks form among rock mineral particles,micro-cracks connect to form micro-hydraulic fracture surfaces,and micro-hydraulic fracture surfaces open to form macrohydraulic fractures.HF begins to form at the micro-cracking initiation pressure(MCIP),which was tested by keeping the HF tip near the initiation point.The theoretical value of MCIP calculated by the proposed propagation criterion is close to MCIP tested.展开更多
This study investigates the instability characteristics of dynamic disasters resulting from disruption caused by extracting resources underground. Utilizing the split Hopkinson pressure bar (SHPB) system, the dynamic ...This study investigates the instability characteristics of dynamic disasters resulting from disruption caused by extracting resources underground. Utilizing the split Hopkinson pressure bar (SHPB) system, the dynamic response mechanism of coal energy evolution is examined, and the energy instability criterion is established. The validity of the instability criterion is explored from the standpoint of damage progression. The results demonstrate that the energy conversion mechanism undergoes a fundamental alternation under impact disturbance. Moreover, the energy release rate as well as the energy dissipation rate undergo comparable changes across distinct levels of impact disturbance. The distinction between the energy release rate and the energy dissipation rate (DRD) increases as coal mass deformation grows. Prior to coal facing instability and failure, the DRD experienced an inflection point followed by a sharp decrease. In conjunction with the discussion on the damage evolution, the physical and mechanical significance of DRD remains clear, which can essentially describe the whole impact loading process. The phenomenon that the inflection point appears and DRD subsequently suddenly decreases can be employed as the energy criterion prior to the failure of instability. Furthermore, this paper provides significant reference for the prediction of dynamic instability of coal under dynamic disturbance.展开更多
In this paper,we study normal families of meromorphic functions.By using the idea in[16],we obtain some normality criteria for families of meromorphic functions concerning the wandering multiple functions,which extend...In this paper,we study normal families of meromorphic functions.By using the idea in[16],we obtain some normality criteria for families of meromorphic functions concerning the wandering multiple functions,which extend and improve the well-known Montel's criterion,Bloch-Valiron's theorem,and the related results due to Carathéodory,and Grahl-Nevo et al..展开更多
This paper presents a new criterion for determining the unloading points quantitatively and consistently in a multi-stage triaxial test.The radial strain gradient(RSG)is first introduced as an arc tangent function of ...This paper presents a new criterion for determining the unloading points quantitatively and consistently in a multi-stage triaxial test.The radial strain gradient(RSG)is first introduced as an arc tangent function of the rate of change of radial strain to time.RSG is observed to correlate closely with the stress state of a compressed sample,and reaches a horizontal asymptote as approaching failure.For a given rock type,RSG value at peak stress is almost the same,irrespective of the porosity and permeability.These findings lead to the development of RSG criterion:Unloading points can be precisely determined at the time when RSG reaches a pre-determined value that is a little smaller than or equal to the RSG at peak stress.The RSG criterion is validated against other criteria and the single-stage triaxial test on various types of rocks.Failure envelopes from the RSG criterion match well with those from single-stage tests.A practical procedure is recommended to use the RSG criterion:an unconfined compression or single-stage test is first conducted to determine the RSG at peak stress for one sample,the unloading point is then selected to be a value close to the RSG at peak stress,and the multi-stage test is finally performed on another sample using the pre-selected RSG unloading criterion.Generally,the RSG criterion is applicable for any type of rocks,especially brittle rocks,where other criteria are not suitable.Further,it can be practically implemented on the most available rock mechanical testing instruments.展开更多
Currently,the design of advanced compressor blades has reached the full ThreeDimensional(3D)modeling stage.When analyzing the reasons for the failure of popular corner stall prediction criteria for axial compressors t...Currently,the design of advanced compressor blades has reached the full ThreeDimensional(3D)modeling stage.When analyzing the reasons for the failure of popular corner stall prediction criteria for axial compressors to predict the corner flow state in modern compressor3D blades with end-bend and composite bend-sweep characteristics,it is believed that,in addition to the dihedral angle factor in the corner,the variation of the dihedral angle along the flow path is an important factor that has not been considered to date.In light of this,this study first uses the characteristic effects of the diffuser on the deceleration and pressure increase in airflow to design a series of physical models of varying dihedral angle diffusers that are equivalent to compressors.Based on these models,a quantization parameter is established to characterize the development speed of the intersection of boundary layers at the corner under varying dihedral angle and adverse pressure gradient conditions.After combining this with the effects of secondary flow,a Modified diffusion factor DJ(MDJ)is developed to describe the development of corner flow from the leading edge of the blade to its trailing edge under varying dihedral angle conditions.Finally,based on a compressor cascade database,an improved criterion for predicting corner stall in axial compressors using the MDJ diffusion factor is proposed.The validation results,based on extensive experimental data of compressor blades,reveal that this improved criterion can significantly enhance the accuracy of corner stall predictions in the 3D blades of modern compressors compared to currently used prediction criteria,by taking into account the effects of variations in the dihedral angle.展开更多
The generalized Zhang-Zhu(GZZ)strength criterion was proposed as an extension to the Hoek-Brown criterion and the Mogi criterion.The introduction to mean normal stress results in a non-smooth and non-convex yield surf...The generalized Zhang-Zhu(GZZ)strength criterion was proposed as an extension to the Hoek-Brown criterion and the Mogi criterion.The introduction to mean normal stress results in a non-smooth and non-convex yield surface,which presents a challenge for updating plastic stress.Current research primarily focuses on modified smooth GZZ criteria or approximate solutions,which inevitably lead to increased computational costs or inaccuracies.In this paper,an accurate stress updating algorithm is proposed based on the original GZZ criterion.The algorithm operates entirely in the principal stress space,where numerical singularities at the intersection of yield surfaces are avoided by defining four different types of stress updating.This approach simplifies the GZZ criterion compared to its formulation in general stress space.The return mapping is employed to compute the updated stress and consistent stiffness matrix,facilitating calculations using both finite element implicit and explicit algorithms.Finally,the accuracy of the proposed method is validated using rock true triaxial test data and semianalytical solutions for stresses and displacement around a circular opening under the GZZ criterion.展开更多
The determination of discontinuity shear strength is an important concern in rock engineering.Previous research mainly focused on the shear behavior of discontinuities with identical joint wall compressive strengths(D...The determination of discontinuity shear strength is an important concern in rock engineering.Previous research mainly focused on the shear behavior of discontinuities with identical joint wall compressive strengths(DIJCS).However,the shear behavior of discontinuities with different joint wall compressive strengths(DDJCS)and 3D surface morphology had been rarely reported.In this study,matched mortar DDJCSs were prepared using 3D printed photosensitive resin molds.Direct shear tests were carried out under three kinds of normal stress(ranging from 0.5 to 3.0 MPa)to analyze the shear strength and contact zones of DDJCS during shearing.The results show that the contact zones of DDJCS during shearing are scattered in the steep zones facing the shear direction.It is verified that Grasselli and Develi’s directional surface roughness characterization method can be used to predict the shear-induced potential contact zones of DDJCS.When the critical apparent dip angle is equal to the peak dilation angle,the predicted contact area agrees well with the actual contact area.A 3D directional roughness parameter with clear physical meaning was introduced to characterize discontinuity surface roughness.A 3D modified joint roughness coefficient-joint wall compressive strength(JRC-JCS)criterion that can both predict the shear strength of DDJCS and DIJCS was proposed based on the newly defined roughness parameter.The proposed criterion was validated by 77 direct shear tests presented by this study and 163 direct shear tests presented by other investigators.The results show that the proposed criterion was generally reliable for the peak shear strength prediction of DDJCS and DIJCS(within 16%).It is also found that the new criterion can capture the anisotropy of the peak shear strength of DDJCS.The anisotropy of DDJCS decreases with increasing normal stress.It should be noted that the anisotropy of the shear strength of DDJCS was not investigated experimentally,and further experiments should be conducted to verify it.展开更多
The experiments and numerical simulation were conducted for ZL205A aluminum alloy cylindrical shell casting. The formation mechanism of the linear segregation produced by the low pressure die casting (LPDC) process wa...The experiments and numerical simulation were conducted for ZL205A aluminum alloy cylindrical shell casting. The formation mechanism of the linear segregation produced by the low pressure die casting (LPDC) process was investigated. And the heat transfer of the casting during solidification process was analyzed by simulation technique, resulting from the information of linear segregation obtained by plenty of experiments. The new linear segregation criterion was proposed through the simulation and experimental results. It was found that the melting metal with high Cu contents was feeding the crack shrinkage formed by the tearing under the effect of feeding pressure during the later solidification, which led to the formation of linear segregation. The control methods for the linear segregation were suggested based on the proposed mechanism. Finally, the criterion of linear segregation was confirmed by the production of the actual castings.展开更多
As one of the principal failures,ductile fracturing restricts metal forming process.Cockcroft-Latham type fracture criterion is suited for ductile fracture in bulk metal-forming simulation.Finding a way to evaluate th...As one of the principal failures,ductile fracturing restricts metal forming process.Cockcroft-Latham type fracture criterion is suited for ductile fracture in bulk metal-forming simulation.Finding a way to evaluate the ductile fracture criterion（DFC） and identify the relationship between DFC and deformation conditions for a strain-softening material,7075 aluminum alloy;however,it is a non-trivial issue that still needs to be addressed in a greater depth.An innovative approach is brought forth that the compression tests and numerical simulations provide mutual support to evaluate the ductile damage cumulating process and determine the DFC diagram.One of the results shows that for a fixed temperature,the maximum cumulated damage decreases regularly with increasing strain rate.The most important result shows that DFC of 7075 aluminum alloy at temperatures of 573-723 K and strain rates of 0.01-10 s-1 is not a constant but a change in a range of 0.255-0.453,thus it has been defined with varying ductile fracture criterion（VDFC） and characterized by a function of strain rate and temperature.According to VDFC diagram,the exact fracture moment and position during various forming processes will be predicted conveniently,in addition to which,the deformation domains with lower fracture risk corresponding to higher VDFC can be identified.展开更多
Liquid metal filling flow process in the microscale during the centrifugal casting process was studied by means of similar physical simulation. The research was focused on derived similarity criterion. Based on the tr...Liquid metal filling flow process in the microscale during the centrifugal casting process was studied by means of similar physical simulation. The research was focused on derived similarity criterion. Based on the traditional flow equations, the flow equation and the Bernoulli＇s equation for liquid metal flows in micro-scale space were derived, which provides a mathematical model for numerical simulation of micro-scale flow. In the meanwhile, according to the micro-flow equation and the similarity theory, the similarity criterion for the physical simulation of the mold filling behaviors was presented under centrifugal force field, so as to achieve the visual observation and quantitative analysis of micro-flow process.展开更多
基金supported by the National Science and Technology Council,Taiwan under grants NSTC 111-2221-E-019-047 and NSTC 112-2221-E-019-030.
文摘In this paper,an advanced satellite navigation filter design,referred to as the Variational Bayesian Maximum Correntropy Extended Kalman Filter(VBMCEKF),is introduced to enhance robustness and adaptability in scenarios with non-Gaussian noise and heavy-tailed outliers.The proposed design modifies the extended Kalman filter(EKF)for the global navigation satellite system(GNSS),integrating the maximum correntropy criterion(MCC)and the variational Bayesian(VB)method.This adaptive algorithm effectively reduces non-line-of-sight(NLOS)reception contamination and improves estimation accuracy,particularly in time-varying GNSS measurements.Experimental results show that the proposed method significantly outperforms conventional approaches in estimation accuracy under heavy-tailed outliers and non-Gaussian noise.By combining MCC with VB approximation for real-time noise covariance estimation using fixed-point iteration,the VBMCEKF achieves superior filtering performance in challenging GNSS conditions.The method’s adaptability and precision make it ideal for improving satellite navigation performance in stochastic environments.
文摘In the past few decades,the navigation performance of ships and structures in ice-covered waters has not been fully studied,especially the influence of ice mechanical properties on icebreaking ability.Ice bending strength is a key ice parameter for predicting ship ice loads,and accurate ice bending strength is also the key to scaling model tests results to real ship.However,numerical simulation studies on model ice bending strength of ice tanks are often neglected.In this paper,an explicit finite element method model is used to simulate the ice cantilever beam test,and the failure load and bending strength of the ice are obtained.In this model,the Tsai-Wu failure criterion is used as the material constitutive model,and the required simulation parameters are obtained from the model ice test in ice tank.Parameter sensitivity analysis shows that the cantilever beam size of the model ice has a significant effect on the flexural strength.The results show that proper rounding at the root of the cantilever beam is beneficial to reduce stress concentration and obtain more accurate bending strength;the thickness,width and length of the cantilever beam should conform to a certain ratio,and consistent with the ITTC recommended reference.Therefore,the results of this study can promote model ice experiments and numerical studies and provide ice strength data support for ship design and polar ship maneuvering.
基金Projects(52208382, 52278387, 51738002) supported by the National Natural Science Foundation of ChinaProject(2022YJS072) supported by the Fundamental Research Funds for the Central Universities,China。
文摘Ground reinforcement is crucial for tunnel construction, especially in soft rock tunnels. Existing analytical models are inadequate for predicting the ground reaction curves (GRCs) for reinforced tunnels in strain-softening (SS) rock masses. This study proposes a novel analytical model to determine the GRCs of SS rock masses, incorporating ground reinforcement and intermediate principal stress (IPS). The SS constitutive model captures the progressive post- peak failure, while the elastic-brittle model simulates reinforced rock masses. Nine combined states are innovatively investigated to analyze plastic zone development in natural and reinforced regions. Each region is analyzed separately, and coupled through boundary conditions at interface. Comparison with three types of existing models indicates that these models overestimate reinforcement effects. The deformation prediction errors of single geological material models may exceed 75%. Furthermore, neglecting softening and residual zones in natural regions could lead to errors over 50%. Considering the IPS can effectively utilize the rock strength to reduce tunnel deformation by at least 30%, thereby saving on reinforcement and support costs. The computational results show a satisfactory agreement with the monitoring data from a model test and two tunnel projects. The proposed model may offer valuable insights into the design and construction of reinforced tunnel engineering.
文摘The swinging-loading process is essential for automatic artillery loading systems.This study focuses on the problems of reliability analysis that affect swinging-loading positioning accuracy.A dynamic model for a multi degree-of-freedom swinging-loading-integrated rigid-flexible coupling system is established.This model is based on the identification of key parameters and platform experiments.Based on the spatial geometric relationship between the breech and loader during modular charge transfer and the possible maximum interference depth of the modular charge,a new failure criterion for estimating the reliability of swinging-loading positioning accuracy is proposed.Considering the uncertainties in the operation of the pendulum loader,the direct probability integration method is introduced to analyze the reliability of the swinging-loading positioning accuracy under three different charge numbers.The results indicate that under two and four charges,the swinging-loading process shows outstanding reliability.However,an unstable stage appears when the swinging motion occurred under six charges,with a maximum positioning failure probability of 0.0712.A comparison between the results obtained under the conventional and proposed criteria further reveals the effectiveness and necessity of the proposed criterion.
基金supported by the National Key Research and Development Program of China (No.2021YFC2902102)the National Natural Science Foundation of China (Nos.52374103 and 52274013)。
文摘Hydraulic fracture(HF)formed in rock significantly helps with the development of geo-energy and georesources.The HF formation condition was challenging to understand,with obscure rock micro-cracking mechanisms being a key factor.The rock micro-cracking mechanism under gradient pore water pressure was analyzed on the scale of mineral particles and it was combined with macroscopic boundary conditions of rock hydraulic fracturing,obtaining the propagation criterion of HF in rock based on the rock micro-cracking mechanism which was verified by experiment.The results show that the disturbed skeleton stress induced by the disturbance of gradient pore water pressure in rock equals the pore water pressure difference.The overall range of the defined mechanical shape factor a/b is around 1,but greater than0.5.Under the combined influence of pore water pressure differences and macroscopic boundary stresses on the rock micro-cracking,micro-cracks form among rock mineral particles,micro-cracks connect to form micro-hydraulic fracture surfaces,and micro-hydraulic fracture surfaces open to form macrohydraulic fractures.HF begins to form at the micro-cracking initiation pressure(MCIP),which was tested by keeping the HF tip near the initiation point.The theoretical value of MCIP calculated by the proposed propagation criterion is close to MCIP tested.
基金Projects(51934007,12072363,52004268) supported by the National Natural Science Foundation of ChinaProject(22KJD440002) supported by the Natural Science Fund for Colleges and Universities in Jiangsu Province,China。
文摘This study investigates the instability characteristics of dynamic disasters resulting from disruption caused by extracting resources underground. Utilizing the split Hopkinson pressure bar (SHPB) system, the dynamic response mechanism of coal energy evolution is examined, and the energy instability criterion is established. The validity of the instability criterion is explored from the standpoint of damage progression. The results demonstrate that the energy conversion mechanism undergoes a fundamental alternation under impact disturbance. Moreover, the energy release rate as well as the energy dissipation rate undergo comparable changes across distinct levels of impact disturbance. The distinction between the energy release rate and the energy dissipation rate (DRD) increases as coal mass deformation grows. Prior to coal facing instability and failure, the DRD experienced an inflection point followed by a sharp decrease. In conjunction with the discussion on the damage evolution, the physical and mechanical significance of DRD remains clear, which can essentially describe the whole impact loading process. The phenomenon that the inflection point appears and DRD subsequently suddenly decreases can be employed as the energy criterion prior to the failure of instability. Furthermore, this paper provides significant reference for the prediction of dynamic instability of coal under dynamic disturbance.
文摘In this paper,we study normal families of meromorphic functions.By using the idea in[16],we obtain some normality criteria for families of meromorphic functions concerning the wandering multiple functions,which extend and improve the well-known Montel's criterion,Bloch-Valiron's theorem,and the related results due to Carathéodory,and Grahl-Nevo et al..
文摘This paper presents a new criterion for determining the unloading points quantitatively and consistently in a multi-stage triaxial test.The radial strain gradient(RSG)is first introduced as an arc tangent function of the rate of change of radial strain to time.RSG is observed to correlate closely with the stress state of a compressed sample,and reaches a horizontal asymptote as approaching failure.For a given rock type,RSG value at peak stress is almost the same,irrespective of the porosity and permeability.These findings lead to the development of RSG criterion:Unloading points can be precisely determined at the time when RSG reaches a pre-determined value that is a little smaller than or equal to the RSG at peak stress.The RSG criterion is validated against other criteria and the single-stage triaxial test on various types of rocks.Failure envelopes from the RSG criterion match well with those from single-stage tests.A practical procedure is recommended to use the RSG criterion:an unconfined compression or single-stage test is first conducted to determine the RSG at peak stress for one sample,the unloading point is then selected to be a value close to the RSG at peak stress,and the multi-stage test is finally performed on another sample using the pre-selected RSG unloading criterion.Generally,the RSG criterion is applicable for any type of rocks,especially brittle rocks,where other criteria are not suitable.Further,it can be practically implemented on the most available rock mechanical testing instruments.
基金co-supported by the National Natural Science Foundation of China(No.52406041)the China Postdoctoral Science Foundation(No.2025M774200)the National Science and Technology Major Project of China(No.2019-Ⅱ-0003-0023)。
文摘Currently,the design of advanced compressor blades has reached the full ThreeDimensional(3D)modeling stage.When analyzing the reasons for the failure of popular corner stall prediction criteria for axial compressors to predict the corner flow state in modern compressor3D blades with end-bend and composite bend-sweep characteristics,it is believed that,in addition to the dihedral angle factor in the corner,the variation of the dihedral angle along the flow path is an important factor that has not been considered to date.In light of this,this study first uses the characteristic effects of the diffuser on the deceleration and pressure increase in airflow to design a series of physical models of varying dihedral angle diffusers that are equivalent to compressors.Based on these models,a quantization parameter is established to characterize the development speed of the intersection of boundary layers at the corner under varying dihedral angle and adverse pressure gradient conditions.After combining this with the effects of secondary flow,a Modified diffusion factor DJ(MDJ)is developed to describe the development of corner flow from the leading edge of the blade to its trailing edge under varying dihedral angle conditions.Finally,based on a compressor cascade database,an improved criterion for predicting corner stall in axial compressors using the MDJ diffusion factor is proposed.The validation results,based on extensive experimental data of compressor blades,reveal that this improved criterion can significantly enhance the accuracy of corner stall predictions in the 3D blades of modern compressors compared to currently used prediction criteria,by taking into account the effects of variations in the dihedral angle.
基金the financial support provided by the National Key R&D Program of China(Grant No.2022YFB2302102)the National Natural Science Foundation of China(Grant Nos.42472340 and 42072308).
文摘The generalized Zhang-Zhu(GZZ)strength criterion was proposed as an extension to the Hoek-Brown criterion and the Mogi criterion.The introduction to mean normal stress results in a non-smooth and non-convex yield surface,which presents a challenge for updating plastic stress.Current research primarily focuses on modified smooth GZZ criteria or approximate solutions,which inevitably lead to increased computational costs or inaccuracies.In this paper,an accurate stress updating algorithm is proposed based on the original GZZ criterion.The algorithm operates entirely in the principal stress space,where numerical singularities at the intersection of yield surfaces are avoided by defining four different types of stress updating.This approach simplifies the GZZ criterion compared to its formulation in general stress space.The return mapping is employed to compute the updated stress and consistent stiffness matrix,facilitating calculations using both finite element implicit and explicit algorithms.Finally,the accuracy of the proposed method is validated using rock true triaxial test data and semianalytical solutions for stresses and displacement around a circular opening under the GZZ criterion.
基金Project(GZB202405561)supported by the China Postdoctoral Fellowship ProgramProject(42377154)supported by the National Natural Science Foundation of China。
文摘The determination of discontinuity shear strength is an important concern in rock engineering.Previous research mainly focused on the shear behavior of discontinuities with identical joint wall compressive strengths(DIJCS).However,the shear behavior of discontinuities with different joint wall compressive strengths(DDJCS)and 3D surface morphology had been rarely reported.In this study,matched mortar DDJCSs were prepared using 3D printed photosensitive resin molds.Direct shear tests were carried out under three kinds of normal stress(ranging from 0.5 to 3.0 MPa)to analyze the shear strength and contact zones of DDJCS during shearing.The results show that the contact zones of DDJCS during shearing are scattered in the steep zones facing the shear direction.It is verified that Grasselli and Develi’s directional surface roughness characterization method can be used to predict the shear-induced potential contact zones of DDJCS.When the critical apparent dip angle is equal to the peak dilation angle,the predicted contact area agrees well with the actual contact area.A 3D directional roughness parameter with clear physical meaning was introduced to characterize discontinuity surface roughness.A 3D modified joint roughness coefficient-joint wall compressive strength(JRC-JCS)criterion that can both predict the shear strength of DDJCS and DIJCS was proposed based on the newly defined roughness parameter.The proposed criterion was validated by 77 direct shear tests presented by this study and 163 direct shear tests presented by other investigators.The results show that the proposed criterion was generally reliable for the peak shear strength prediction of DDJCS and DIJCS(within 16%).It is also found that the new criterion can capture the anisotropy of the peak shear strength of DDJCS.The anisotropy of DDJCS decreases with increasing normal stress.It should be noted that the anisotropy of the shear strength of DDJCS was not investigated experimentally,and further experiments should be conducted to verify it.
文摘The experiments and numerical simulation were conducted for ZL205A aluminum alloy cylindrical shell casting. The formation mechanism of the linear segregation produced by the low pressure die casting (LPDC) process was investigated. And the heat transfer of the casting during solidification process was analyzed by simulation technique, resulting from the information of linear segregation obtained by plenty of experiments. The new linear segregation criterion was proposed through the simulation and experimental results. It was found that the melting metal with high Cu contents was feeding the crack shrinkage formed by the tearing under the effect of feeding pressure during the later solidification, which led to the formation of linear segregation. The control methods for the linear segregation were suggested based on the proposed mechanism. Finally, the criterion of linear segregation was confirmed by the production of the actual castings.
基金Project(2012ZX04010081) supported by the National Key Technologies R & D Program of ChinaProject(cstc2009aa3012-1) supported by the Science and Technology Committee of Chongqing,ChinaProject(CDJZR11130009) supported by the Fundamental Research Funds for the Central Universities,China
文摘As one of the principal failures,ductile fracturing restricts metal forming process.Cockcroft-Latham type fracture criterion is suited for ductile fracture in bulk metal-forming simulation.Finding a way to evaluate the ductile fracture criterion（DFC） and identify the relationship between DFC and deformation conditions for a strain-softening material,7075 aluminum alloy;however,it is a non-trivial issue that still needs to be addressed in a greater depth.An innovative approach is brought forth that the compression tests and numerical simulations provide mutual support to evaluate the ductile damage cumulating process and determine the DFC diagram.One of the results shows that for a fixed temperature,the maximum cumulated damage decreases regularly with increasing strain rate.The most important result shows that DFC of 7075 aluminum alloy at temperatures of 573-723 K and strain rates of 0.01-10 s-1 is not a constant but a change in a range of 0.255-0.453,thus it has been defined with varying ductile fracture criterion（VDFC） and characterized by a function of strain rate and temperature.According to VDFC diagram,the exact fracture moment and position during various forming processes will be predicted conveniently,in addition to which,the deformation domains with lower fracture risk corresponding to higher VDFC can be identified.
基金Project(51005053)supported by the National Science Foundation for Young Scientists of China
文摘Liquid metal filling flow process in the microscale during the centrifugal casting process was studied by means of similar physical simulation. The research was focused on derived similarity criterion. Based on the traditional flow equations, the flow equation and the Bernoulli＇s equation for liquid metal flows in micro-scale space were derived, which provides a mathematical model for numerical simulation of micro-scale flow. In the meanwhile, according to the micro-flow equation and the similarity theory, the similarity criterion for the physical simulation of the mold filling behaviors was presented under centrifugal force field, so as to achieve the visual observation and quantitative analysis of micro-flow process.
