An analytical simulation based on a new model incorporating surface interaction is conducted to study the slip phenomenon in the Couette flow at different scales. The velocity profile is calculated by taking account o...An analytical simulation based on a new model incorporating surface interaction is conducted to study the slip phenomenon in the Couette flow at different scales. The velocity profile is calculated by taking account of the micro-force between molecules and macro-force from the viscous shearing effect, as they contribute to the achieve- ment of the slip length. The calculated results are compared with those obtained from the molecular dynamics simulation, showing an excellent agreement. Further, the effect of the shear rate on the slip is investigated. The results can well predict the fluid flow behaviors on a solid substrate, but has to be proved by experiment.展开更多
In order to measure the residual stress components in an elastic thin plate, the hole-drilling strain-gage method has been used. This method enables to determine the relation between the magnitudes and directions of t...In order to measure the residual stress components in an elastic thin plate, the hole-drilling strain-gage method has been used. This method enables to determine the relation between the magnitudes and directions of the principal stresses and the strain relaxation about the hole. In the existing analytical models based on stress field, the formulations associated with the hole-drilling method are based on the assumption of an infinite plate, this may cause some errors for a finite plate and it’s difficult to validate these solutions by FE methods. Furthermore, in the composite, the displacement field is continuous but the stress field is not necessarily continuous, the displacement field based method has to be used. In the present paper an analyt-ical model based on a displacement field described by a function with coefficients to determine for a finite round thin plate is presented. The coefficients used in the displacement field are independent on the three residual stress components, and they are determined by minimization of the internal strain energy during the hole-drilling process. Once the coefficients in the dis-placement field are determined, three strains measured in three radial directions are utilized to determine the three residual stress components. The proposed analytical model can be also adapted to infinite plate by assuming that the diameter of the round plate tends to infinite.展开更多
On the basis of the concept of finite element methods, the rigorous analytical solutions of structural response in terms of the design variables are researched in this paper. The spatial trusses are taken as an exampl...On the basis of the concept of finite element methods, the rigorous analytical solutions of structural response in terms of the design variables are researched in this paper. The spatial trusses are taken as an example for the solution of the analytical expressions of the explicit displacements which are proved mathematically; then some conclusions are reached that are useful to structural sensitivity analysis and optimization. In the third part of the paper, a generalized geometric programming method is sugviped for the optimal model with the explicit displacement. Finally, the analytical solutions of the displacements of three trusses are given as examples.展开更多
For a more accurate and comprehensive assessment of the trustworthiness of component-based soft- ware system, the fuzzy analytic hierarchy process is introduced to establish the analysis model. Combine qualitative and...For a more accurate and comprehensive assessment of the trustworthiness of component-based soft- ware system, the fuzzy analytic hierarchy process is introduced to establish the analysis model. Combine qualitative and quantitative analyses, the impacts to overall trustworthiness by the different types of components are distinguished. Considering the coupling relationship between components, dividing the system into several layers from target layer to scheme layer, evaluating the scheme advantages disadvantages by group decision-making, the trustworthiness of a typical J2EE structured component-based software is assessed. The trustworthiness asses model of the software components provides an effective methods of operation.展开更多
From the perspective of students,the effectiveness of task-based approach in In-organic and Analytical Chemistry course were summarized.The strength and weak points of TBA were analyzed,and the specific suggestions fo...From the perspective of students,the effectiveness of task-based approach in In-organic and Analytical Chemistry course were summarized.The strength and weak points of TBA were analyzed,and the specific suggestions for obtaining better effect were put forward.The result showed a satisfactory achievement and unexpected result in showing the effectiveness of this teaching model.Not only could this TBA enhance student's overall knowledge of discipline but also cultivate students' multi-dimensional competence:competence in searching literatures, communication and management,autonomous,co-operative and reflective learning,and competence in analyzing and problem-solving,as well as improving their language expression ability,and skills in using multi-media and internet technology into their academic course learning and research.The implication of this research on the classroom teaching practice will shed light on the future teaching reform of other courses in China.展开更多
In this paper, we present a two-dimensional （2D） fully analytical model with consideration of polarization effect for the channel potential and electric field distributions of the gate field-plated high electron mob...In this paper, we present a two-dimensional （2D） fully analytical model with consideration of polarization effect for the channel potential and electric field distributions of the gate field-plated high electron mobility transistor （FP-HEMT） on the basis of 2D Poisson＇s solution. The dependences of the channel potential and electric field distributions on drain bias, polarization charge density, FP structure parameters, A1GaN/GaN material parameters, etc. are investigated. A simple and convenient approach to designing high breakdown voltage FP-HEMTs is also proposed. The validity of this model is demonstrated by comparison with the numerical simulations with Silvaco-Atlas. The method in this paper can be extended to the development of other analytical models for different device structures, such as MIS-HEMTs, multiple-FP HETMs, slant-FP HEMTs, etc.展开更多
The nucleotide (base) sequence of the genome might reflect biological information beyond the coding sequences. The appearance frequencies of successive base sequences (key sequences) were calculated for entire genomes...The nucleotide (base) sequence of the genome might reflect biological information beyond the coding sequences. The appearance frequencies of successive base sequences (key sequences) were calculated for entire genomes. Based on the appearance frequency of the key sequences of the genome, any DNA sequences on the genome could be expressed as a sequence spectrum with the adjoining base sequences, which could be used to study the corresponding biological phenomena. In this paper, we used 64 successive three- base sequences (triplets) as the key sequences, and determined and compared the spectra of specific genes to the chromosome, or specific genes to tRNA genes in Saccharomyces cerevisiae, Schizosaccharomyces pombe and Escherichia coli. Based on these analyses, a gene and its corresponding position on the chromosome showed highly similar spectra with the same fold enlargement (approximately 400-fold) in the S. cerevisiae, S. pombe and E. coli genomes. In addition, the homologous structure of genes that encode proteins was also observed with appropriate tRNA gene(s) in the genome. This analytical method might faithfully reflect the encoded biological information, that is, the conservation of the base sequences was to make sense the conservation of the translated amino acids sequence in the coding region, and might be universally applicable to other genomes, even those that consisted of multiple chromosomes.展开更多
An improved case-based reasoning （CBR） method was proposed to predict the endpoint temperature of molten steel in Ruhrstahl Heraeus （RH） process. Firstly, production data were analyzed by multiple linear regressio...An improved case-based reasoning （CBR） method was proposed to predict the endpoint temperature of molten steel in Ruhrstahl Heraeus （RH） process. Firstly, production data were analyzed by multiple linear regressions and a pairwise comparison matrix in analytic hierarchy process （AHP） was determined by this linear regression＇s coefficient. The weights of various influencing factors were obtained by AHP. Secondly, the dividable principles of case base including ＂0-1＂ and ＂breakpoint＂ were proposed, and the case base was divided into several homogeneous parts. Finally, the improved CBR was compared with ordinary CBR, which is based on the even weight and the single base. The results show that the improved CBR has a higher hit rate for predicting the endpoint temperature of molten steel in RH.展开更多
The first decade since the completion of the Human Genome Project has been marked with rapid development of genomic technologies and their immediate clinical applications. Genomic analysis using oligonucleotide array ...The first decade since the completion of the Human Genome Project has been marked with rapid development of genomic technologies and their immediate clinical applications. Genomic analysis using oligonucleotide array comparative genomic hybridization （aCGH） or single nucleotide polymorphism （SNP） chips has been applied to pediatric patients with developmental and intellectual disabilities （DD/ ID）, multiple congenital anomalies （MCA） and autistic spectrum disorders （ASD）. Evaluation of analytical and clinical validities of aCGH showed 〉 99% sensitivity and specificity and increased analytical resolution by higher density probe coverage. Reviews of case series, multi-center comparison and large patient-control studies demonstrated a diagnostic yield of 12%--20%; approximately 60% of these abnormalities were recurrent genomic disorders. This pediatric experience has been extended toward prenatal diagnosis. A series of reports indicated approximately 10% of pregnancies with ultrasound-detected structural anomalies and normal cytogenetic findings had genomic abnormalities, and 30% of these abnormalities were syndromic genomic disorders. Evidence-based practice guidelines and standards for implementing genomic analysis and web-delivered knowledge resources for interpreting genomic findings have been established. The progress from this technology-driven and evidence-based genomic analysis provides not only opportunities to dissect disease-causing mechanisms and develop rational therapeutic interventions but also important lessons for integrating genomic sequencing into pediatric and prenatal genetic evaluation.展开更多
The limitations of traditional approaches to selection problems are examined. A problemsolving strategy is presented in which decision-support and knowledge-based techniques play complementary roles. An approach to th...The limitations of traditional approaches to selection problems are examined. A problemsolving strategy is presented in which decision-support and knowledge-based techniques play complementary roles. An approach to the representation of knowledge to support the problem-solving strategy is presented which avoids commitment to a specific programming language or implementation environment. The problem of choosing a home is used to illustrate the representation of knowledge in a specific problem domain. Techniques for implementation of the problem-solving strategy are described. Knowledge elicitation techniques and their implementation in a development shell for application of the problem-solving strategy to any selection problem are also described.展开更多
We solve the local uniaxial tension of an infinite rod in the framework of non-ordinary state-based peridynamics.The singular solutions of stress and displacement are acquired.When the influencing range of the window ...We solve the local uniaxial tension of an infinite rod in the framework of non-ordinary state-based peridynamics.The singular solutions of stress and displacement are acquired.When the influencing range of the window function approaches zero,these two solutions will return to the solutions of the classical elasticity.The analysis shows that the singularities of the solutions stem from such a feature of the window function that must be represented by a rapidly decreasing function in physics.Contrary to the classical elasticity,the stress solution of peridynamics is smoother than the displacement solution.In addition,a criterion used to select the window function is proposed in this paper.展开更多
Developing a portable yet affordable method for the discrimination of chemical substances with good sensitivity and selectivity is essential for on-site visual detection of unknown substances.Herein,we propose an opto...Developing a portable yet affordable method for the discrimination of chemical substances with good sensitivity and selectivity is essential for on-site visual detection of unknown substances.Herein,we propose an optofluidic paper-based analytical device(PAD)that consists of a macromolecule-driven flow(MDF)gate and photonic crystal(PhC)coding units,enabling portable and scalable detection and discrimination of various organic chemical,mimicking the olfactory system.The MDF gate is designed for precise flow control of liquid analytes,which depends on intermolecular interactions between the polymer at the MDF gate and the liquid analytes.Subsequently,the PhC coding unit allows for visualizing the result obtained from the MDF gate and generating differential optical patterns.We fabricate an optofluidic PAD by integrating two coding units into a three-dimensional(3D)microfluidic paper within a 3D-printed cartridge.The optofluidic PADs clearly distinguish 11 organic chemicals with digital readout of pattern recognition from colorimetric signals.We believe that our optofluidic coding strategy mimicking the olfactory system opens up a wide range of potential applications in colorimetric monitoring of chemicals observed in environment.展开更多
This study proposes a novel U-shaped 65Mn steel bumper as the displacement restraining device for base-isolated structures with laminated elastomeric rubber bearings.A series of bumpers with different geometric parame...This study proposes a novel U-shaped 65Mn steel bumper as the displacement restraining device for base-isolated structures with laminated elastomeric rubber bearings.A series of bumpers with different geometric parameters were designed and tested under monotonic and cyclic quasi-static loading protocols.The experimental results from a total of 232 specimens were analyzed to develop an analytical model to calculate the backbone curve and the maximum elastic restoring force for U-shaped 65Mn bumpers.Thus,the analytical equations to calculate the elastic,hardening,and unloading stiffness of U-shaped 65Mn bumpers,as well as their maximum elastic restoring force,are validated by using an additional ten groups of bumpers with varying radiuses.These analytical equations can accurately predict the mechanical parameters of U-shaped 65Mn steel bumpers for a design purpose.展开更多
The factors affecting the developmcnt of Sinopec lubricating oil were analyzed in this paper, and an analytic hierarchy process （AHP） model for selecting lubricating-oil producing bases was developed. By using this ...The factors affecting the developmcnt of Sinopec lubricating oil were analyzed in this paper, and an analytic hierarchy process （AHP） model for selecting lubricating-oil producing bases was developed. By using this model, nine lubricating oil producing companies under Sinopec were comprehensively evaluated. The evaluation result showed that the Maoming Lubricating Oil Company （Guangdong province）, Jingmen Lubricating Oil Company （Hubei province） and Changcheng Lube Oil Company （Beijing） are top three choices, and should be developed preferentially for the development of Sinopec producing bases of lubricating oil in the future. The conclusions provide the theoretical basis for selecting lubricating oil producing bases for decision makers.展开更多
In an Underwater Wireless Sensor Network(UWSN),extreme energy loss is carried out by the early expiration of sensor nodes and causes a reduction in efficiency in the submerged acoustic sensor system.Systems based on c...In an Underwater Wireless Sensor Network(UWSN),extreme energy loss is carried out by the early expiration of sensor nodes and causes a reduction in efficiency in the submerged acoustic sensor system.Systems based on clustering strategies,instead of each node sending information by itself,utilize cluster heads to collect information inside the clusters for forwarding collective information to sink.This can effectively minimize the total energy loss during transmission.The environment of UWSN is 3D architecture-based and follows a complex hierarchical clustering strategy involving its most effecting unique parameters such as propagation delay and limited transmission bandwidth.Round base clustering strategy works in rounds,where each round comprises three fundamental stages:cluster head selection,grouping or node association,and data aggregation followed by forwarding data to the sink.In UWSN,the energy consumed during the formation of clusters has been considered casually or completely evaded in the previous works.In this paper,the cluster head setup period has been considered the main contributor to extra energy utilizer.A numerical channel model is proposed to compute extra energy.It is performed by using a UWSN broad model.The results have shown that extra maximum energy consumption is approximately 12.9 percent of the system total energy consumed in information transmissions.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 51305033the Ministry of National Defense of China under Grant No 9140C340506
文摘An analytical simulation based on a new model incorporating surface interaction is conducted to study the slip phenomenon in the Couette flow at different scales. The velocity profile is calculated by taking account of the micro-force between molecules and macro-force from the viscous shearing effect, as they contribute to the achieve- ment of the slip length. The calculated results are compared with those obtained from the molecular dynamics simulation, showing an excellent agreement. Further, the effect of the shear rate on the slip is investigated. The results can well predict the fluid flow behaviors on a solid substrate, but has to be proved by experiment.
文摘In order to measure the residual stress components in an elastic thin plate, the hole-drilling strain-gage method has been used. This method enables to determine the relation between the magnitudes and directions of the principal stresses and the strain relaxation about the hole. In the existing analytical models based on stress field, the formulations associated with the hole-drilling method are based on the assumption of an infinite plate, this may cause some errors for a finite plate and it’s difficult to validate these solutions by FE methods. Furthermore, in the composite, the displacement field is continuous but the stress field is not necessarily continuous, the displacement field based method has to be used. In the present paper an analyt-ical model based on a displacement field described by a function with coefficients to determine for a finite round thin plate is presented. The coefficients used in the displacement field are independent on the three residual stress components, and they are determined by minimization of the internal strain energy during the hole-drilling process. Once the coefficients in the dis-placement field are determined, three strains measured in three radial directions are utilized to determine the three residual stress components. The proposed analytical model can be also adapted to infinite plate by assuming that the diameter of the round plate tends to infinite.
文摘On the basis of the concept of finite element methods, the rigorous analytical solutions of structural response in terms of the design variables are researched in this paper. The spatial trusses are taken as an example for the solution of the analytical expressions of the explicit displacements which are proved mathematically; then some conclusions are reached that are useful to structural sensitivity analysis and optimization. In the third part of the paper, a generalized geometric programming method is sugviped for the optimal model with the explicit displacement. Finally, the analytical solutions of the displacements of three trusses are given as examples.
基金Sponsored by the National High Technology Research and Development Program of China ("863"Program) (2009AA01Z433)
文摘For a more accurate and comprehensive assessment of the trustworthiness of component-based soft- ware system, the fuzzy analytic hierarchy process is introduced to establish the analysis model. Combine qualitative and quantitative analyses, the impacts to overall trustworthiness by the different types of components are distinguished. Considering the coupling relationship between components, dividing the system into several layers from target layer to scheme layer, evaluating the scheme advantages disadvantages by group decision-making, the trustworthiness of a typical J2EE structured component-based software is assessed. The trustworthiness asses model of the software components provides an effective methods of operation.
基金Supported by 2011 Shaanxi Higher Education Teaching Reform Program(11BY12)
文摘From the perspective of students,the effectiveness of task-based approach in In-organic and Analytical Chemistry course were summarized.The strength and weak points of TBA were analyzed,and the specific suggestions for obtaining better effect were put forward.The result showed a satisfactory achievement and unexpected result in showing the effectiveness of this teaching model.Not only could this TBA enhance student's overall knowledge of discipline but also cultivate students' multi-dimensional competence:competence in searching literatures, communication and management,autonomous,co-operative and reflective learning,and competence in analyzing and problem-solving,as well as improving their language expression ability,and skills in using multi-media and internet technology into their academic course learning and research.The implication of this research on the classroom teaching practice will shed light on the future teaching reform of other courses in China.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61204085 and 61334002)the Fundamental Research Funds for the Central Universities,China(Grant No.K5051225013)
文摘In this paper, we present a two-dimensional （2D） fully analytical model with consideration of polarization effect for the channel potential and electric field distributions of the gate field-plated high electron mobility transistor （FP-HEMT） on the basis of 2D Poisson＇s solution. The dependences of the channel potential and electric field distributions on drain bias, polarization charge density, FP structure parameters, A1GaN/GaN material parameters, etc. are investigated. A simple and convenient approach to designing high breakdown voltage FP-HEMTs is also proposed. The validity of this model is demonstrated by comparison with the numerical simulations with Silvaco-Atlas. The method in this paper can be extended to the development of other analytical models for different device structures, such as MIS-HEMTs, multiple-FP HETMs, slant-FP HEMTs, etc.
文摘The nucleotide (base) sequence of the genome might reflect biological information beyond the coding sequences. The appearance frequencies of successive base sequences (key sequences) were calculated for entire genomes. Based on the appearance frequency of the key sequences of the genome, any DNA sequences on the genome could be expressed as a sequence spectrum with the adjoining base sequences, which could be used to study the corresponding biological phenomena. In this paper, we used 64 successive three- base sequences (triplets) as the key sequences, and determined and compared the spectra of specific genes to the chromosome, or specific genes to tRNA genes in Saccharomyces cerevisiae, Schizosaccharomyces pombe and Escherichia coli. Based on these analyses, a gene and its corresponding position on the chromosome showed highly similar spectra with the same fold enlargement (approximately 400-fold) in the S. cerevisiae, S. pombe and E. coli genomes. In addition, the homologous structure of genes that encode proteins was also observed with appropriate tRNA gene(s) in the genome. This analytical method might faithfully reflect the encoded biological information, that is, the conservation of the base sequences was to make sense the conservation of the translated amino acids sequence in the coding region, and might be universally applicable to other genomes, even those that consisted of multiple chromosomes.
基金financially supported by the National Key Technology R&D Program in the 11th Five-Years Plan of China (No.2006BAE03A07)Fundamental Research Funds for the Central Universities (No.FRF-TP12-086A)
文摘An improved case-based reasoning （CBR） method was proposed to predict the endpoint temperature of molten steel in Ruhrstahl Heraeus （RH） process. Firstly, production data were analyzed by multiple linear regressions and a pairwise comparison matrix in analytic hierarchy process （AHP） was determined by this linear regression＇s coefficient. The weights of various influencing factors were obtained by AHP. Secondly, the dividable principles of case base including ＂0-1＂ and ＂breakpoint＂ were proposed, and the case base was divided into several homogeneous parts. Finally, the improved CBR was compared with ordinary CBR, which is based on the even weight and the single base. The results show that the improved CBR has a higher hit rate for predicting the endpoint temperature of molten steel in RH.
基金supported in part by fellowship award from the China Scholarship Council to Yuan Wei
文摘The first decade since the completion of the Human Genome Project has been marked with rapid development of genomic technologies and their immediate clinical applications. Genomic analysis using oligonucleotide array comparative genomic hybridization （aCGH） or single nucleotide polymorphism （SNP） chips has been applied to pediatric patients with developmental and intellectual disabilities （DD/ ID）, multiple congenital anomalies （MCA） and autistic spectrum disorders （ASD）. Evaluation of analytical and clinical validities of aCGH showed 〉 99% sensitivity and specificity and increased analytical resolution by higher density probe coverage. Reviews of case series, multi-center comparison and large patient-control studies demonstrated a diagnostic yield of 12%--20%; approximately 60% of these abnormalities were recurrent genomic disorders. This pediatric experience has been extended toward prenatal diagnosis. A series of reports indicated approximately 10% of pregnancies with ultrasound-detected structural anomalies and normal cytogenetic findings had genomic abnormalities, and 30% of these abnormalities were syndromic genomic disorders. Evidence-based practice guidelines and standards for implementing genomic analysis and web-delivered knowledge resources for interpreting genomic findings have been established. The progress from this technology-driven and evidence-based genomic analysis provides not only opportunities to dissect disease-causing mechanisms and develop rational therapeutic interventions but also important lessons for integrating genomic sequencing into pediatric and prenatal genetic evaluation.
文摘The limitations of traditional approaches to selection problems are examined. A problemsolving strategy is presented in which decision-support and knowledge-based techniques play complementary roles. An approach to the representation of knowledge to support the problem-solving strategy is presented which avoids commitment to a specific programming language or implementation environment. The problem of choosing a home is used to illustrate the representation of knowledge in a specific problem domain. Techniques for implementation of the problem-solving strategy are described. Knowledge elicitation techniques and their implementation in a development shell for application of the problem-solving strategy to any selection problem are also described.
基金the National Natural Science Foundation of China (11672129)the Research Fund of State Key Laboratory of Mechanics and Control of Mechanical Structures (Nanjing University of Aeronautics and Astronautics, MCMS-I-0218G01)
文摘We solve the local uniaxial tension of an infinite rod in the framework of non-ordinary state-based peridynamics.The singular solutions of stress and displacement are acquired.When the influencing range of the window function approaches zero,these two solutions will return to the solutions of the classical elasticity.The analysis shows that the singularities of the solutions stem from such a feature of the window function that must be represented by a rapidly decreasing function in physics.Contrary to the classical elasticity,the stress solution of peridynamics is smoother than the displacement solution.In addition,a criterion used to select the window function is proposed in this paper.
基金supported by the National Research Foundation of Korea(NRF)Grant funded by the Korea Government(NRF-2020R1C1C1005505 and NRF-2022R1F1A106519512).
文摘Developing a portable yet affordable method for the discrimination of chemical substances with good sensitivity and selectivity is essential for on-site visual detection of unknown substances.Herein,we propose an optofluidic paper-based analytical device(PAD)that consists of a macromolecule-driven flow(MDF)gate and photonic crystal(PhC)coding units,enabling portable and scalable detection and discrimination of various organic chemical,mimicking the olfactory system.The MDF gate is designed for precise flow control of liquid analytes,which depends on intermolecular interactions between the polymer at the MDF gate and the liquid analytes.Subsequently,the PhC coding unit allows for visualizing the result obtained from the MDF gate and generating differential optical patterns.We fabricate an optofluidic PAD by integrating two coding units into a three-dimensional(3D)microfluidic paper within a 3D-printed cartridge.The optofluidic PADs clearly distinguish 11 organic chemicals with digital readout of pattern recognition from colorimetric signals.We believe that our optofluidic coding strategy mimicking the olfactory system opens up a wide range of potential applications in colorimetric monitoring of chemicals observed in environment.
基金National Science Foundation of China for the Financial Support for This Research under Grant Nos.51378047 and 51408027。
文摘This study proposes a novel U-shaped 65Mn steel bumper as the displacement restraining device for base-isolated structures with laminated elastomeric rubber bearings.A series of bumpers with different geometric parameters were designed and tested under monotonic and cyclic quasi-static loading protocols.The experimental results from a total of 232 specimens were analyzed to develop an analytical model to calculate the backbone curve and the maximum elastic restoring force for U-shaped 65Mn bumpers.Thus,the analytical equations to calculate the elastic,hardening,and unloading stiffness of U-shaped 65Mn bumpers,as well as their maximum elastic restoring force,are validated by using an additional ten groups of bumpers with varying radiuses.These analytical equations can accurately predict the mechanical parameters of U-shaped 65Mn steel bumpers for a design purpose.
文摘The factors affecting the developmcnt of Sinopec lubricating oil were analyzed in this paper, and an analytic hierarchy process （AHP） model for selecting lubricating-oil producing bases was developed. By using this model, nine lubricating oil producing companies under Sinopec were comprehensively evaluated. The evaluation result showed that the Maoming Lubricating Oil Company （Guangdong province）, Jingmen Lubricating Oil Company （Hubei province） and Changcheng Lube Oil Company （Beijing） are top three choices, and should be developed preferentially for the development of Sinopec producing bases of lubricating oil in the future. The conclusions provide the theoretical basis for selecting lubricating oil producing bases for decision makers.
文摘In an Underwater Wireless Sensor Network(UWSN),extreme energy loss is carried out by the early expiration of sensor nodes and causes a reduction in efficiency in the submerged acoustic sensor system.Systems based on clustering strategies,instead of each node sending information by itself,utilize cluster heads to collect information inside the clusters for forwarding collective information to sink.This can effectively minimize the total energy loss during transmission.The environment of UWSN is 3D architecture-based and follows a complex hierarchical clustering strategy involving its most effecting unique parameters such as propagation delay and limited transmission bandwidth.Round base clustering strategy works in rounds,where each round comprises three fundamental stages:cluster head selection,grouping or node association,and data aggregation followed by forwarding data to the sink.In UWSN,the energy consumed during the formation of clusters has been considered casually or completely evaded in the previous works.In this paper,the cluster head setup period has been considered the main contributor to extra energy utilizer.A numerical channel model is proposed to compute extra energy.It is performed by using a UWSN broad model.The results have shown that extra maximum energy consumption is approximately 12.9 percent of the system total energy consumed in information transmissions.
