Because of an unfortunate mistake by authors,the Project(5227010679)of Foundation item was wrong.The corrected Project is shown as follows:Project(52271073).
An aluminum-based in-situ composites reinforced with Mg2Si and Si particles were produced by centrifugal casting A1-20Si-5Mg alloy. The microstructure of the composites was examined, and the effects of temperature on ...An aluminum-based in-situ composites reinforced with Mg2Si and Si particles were produced by centrifugal casting A1-20Si-5Mg alloy. The microstructure of the composites was examined, and the effects of temperature on fracture behavior of the composite were investigated. The results show that the average fraction of primary Si and Mg2Si particles in the composites is as high as 38%, and ultimate tensile strengths （UTS） of the composites first increase then decrease with the increase of test temperature. Microstructures of broken specimens show that both the particle fracture and the interface debonding affect the fracture behavior of the composites, and the interface debonding becomes the dominant fracture mechanism with increasing test temperature. Comparative results indicate that rich particles in the composites and excellent interface strength play great roles in enhancing tensile property by preventing the movement of dislocations.展开更多
Electrochemical measurements on three planes of TiC/Inconel 718 composites fabricated by selective laser melting(SLM) were performed to study the corrosion property. The results showed that the YZplane with dense and ...Electrochemical measurements on three planes of TiC/Inconel 718 composites fabricated by selective laser melting(SLM) were performed to study the corrosion property. The results showed that the YZplane with dense and fine columnar structures possessed high microhardness and superior corrosion resistance in 3.5 wt% NaCl solution. For the XZ-plane, a decreased anti-corrosion property was observed owing to its inhomogeneous microstructures. While the XY-plane with large irregular pores and clustered ring-like structures was more susceptible to corrosion compared with the other two planes. Comparative analysis suggested that the anisotropic corrosion behaviors were significantly dependent on the surface defects, microstructure characteristics and added reinforcements.展开更多
In this work,the microstructure,failure behavior and interfacial properties with respective to the interfacial domain in SiCf/BN/SiC and C_(f)/PyC/SiC composites were studied via the fiber push-in test.The differences...In this work,the microstructure,failure behavior and interfacial properties with respective to the interfacial domain in SiCf/BN/SiC and C_(f)/PyC/SiC composites were studied via the fiber push-in test.The differences in the mechanical response of the interfacial domain were observed.During the fiber push-in test for SiCf/BN/SiC,the interface debonding accompanied with interphase fracture occurred,resulting in an obvious sign of the onset of debonding on loading-displacement(P-u)curves.While the good continuity of P-u curves can be observed for Cf/PyC/SiC,which is due to that the failure is in the form of interface debonding along with interphase lateral slipping caused by the extension of buckled carbon fiber,without any interphase fracture.The interfacial properties calculated from the fiber push-in test show that Cf/PyC/SiC possesses a weaker interfacial domain compared with SiC_(f)/BN/SiC.The interfacial shear stress of SiCf/BN/SiC and C_(f)/PyC/SiC composites amounts 94.2 and 48.1 MPa,respectively.展开更多
Transient liquid phase (TLP) bonded aluminium based metal matrix composite (MMC) joints can be classified into three distinct regions, i.e. the particulate segregation region, the denuded particulate region and the ...Transient liquid phase (TLP) bonded aluminium based metal matrix composite (MMC) joints can be classified into three distinct regions, i.e. the particulate segregation region, the denuded particulate region and the base material region. The microstructure of the particulate segregation region consists of alumina particulate and Al alloy matrix with the Al 2Cu and MgAl 2O 4. It contains more and smaller alumina particulates compared with the base material region. The TLP bonded joints have the tensile strength of 150 MPa ～200 MPa and the shear strength of 70 MPa ～100 MPa . With increasing tensile stress, cracks initiate in the particulate segregation region, especially in the particulate/particulate interface and the particulate/matrix interface, and propagate along particulate/matrix interface, througth thin matrix metal and by linking up the close cracks. The particulate segregation region is the weakest during tensile testing and shear testing due to obviously increased proportion of weak bonds (particulate particulate bond and particulate matrix bond).展开更多
A surrogate based particle swarm optimization （SBPSO） algorithm which combines the surrogate modeling technique and particle swarm optimization is applied to the reliability- based robust design （RBRD） of composit...A surrogate based particle swarm optimization （SBPSO） algorithm which combines the surrogate modeling technique and particle swarm optimization is applied to the reliability- based robust design （RBRD） of composite pressure vessels. The algorithm and efficiency of SBPSO are displayed through numerical examples. A model for filament-wound composite pressure vessels with metallic liner is then studied by netting analysis and its responses are analyzed by using Finite element method （performed by software ANSYS）. An optimization problem for maximizing the performance factor is formulated by choosing the winding orientation of the helical plies in the cylindrical portion, the thickness of metal liner and the drop off region size as the design variables. Strength constraints for composite layers and the metal liner are constructed by using Tsai-Wu failure criterion and Mises failure criterion respectively. Numerical examples show that the method proposed can effectively solve the RBRD problem, and the optimal results of the proposed model can satisfy certain reliability requirement and have the robustness to the fluctuation of design variables.展开更多
The development and utilization of lunar resources are entering a critical stage.Immediate focus is needed on key technologies for in-situ resource utilization(ISRU)and lunar base construction.This paper comparatively...The development and utilization of lunar resources are entering a critical stage.Immediate focus is needed on key technologies for in-situ resource utilization(ISRU)and lunar base construction.This paper comparatively analyzes the basic characteristics of lunar regolith samples returned from Chang'e-5(CE-5),Apollo,and Luna missions,focusing on their physical,mechanical,mineral,chemical,and morphological parameters.Given the limited availability of lunar regolith,more than 50 lunar regolith simulants are summarized.The differences between lunar regolith and simulants concerning these parameters are discussed.To facilitate the construction of lunar bases,this article summarizes the advancements in research on construction materials derived from lunar regolith simulants.Based on statistical results,lunar regolith simulant-based composites are classified into 5 types by their strengthening and toughening mechanisms,and a comprehensive analysis of molding methods,preparation conditions,and mechanical properties is conducted.Furthermore,the potential lunar base construction forms are reviewed,and the adaptability of lunar regolith simulant-based composites and lunar base construction methods are proposed.The key demands of lunar bases constructed with lunar regolith-based composites are discussed,including energy demand,in-situ buildability,service performance,and structural availability.This progress contributes to providing essential material and methodological support for future lunar construction.展开更多
The frequent occurrence of safety accidents during the calendering process is caused by the flammable and explosive properties of composite modified double-base(CMDB)propellant.Optimization of process parameters with ...The frequent occurrence of safety accidents during the calendering process is caused by the flammable and explosive properties of composite modified double-base(CMDB)propellant.Optimization of process parameters with the aid of fluid simulation technology could effectively ensure the safety of the calendering process.To improve the accuracy of the simulation results,material parameters and model structure were corrected based on actual conditions,and adaptive grid technology was applied in the local mesh refinement.In addition,the rheological behavior,motion trajectories and heat transfer mechanisms of CMDB propellant slurry were studied with different gaps,rotational rates and temperatures of two rollers.The results indicated that the refined mesh could significantly improve the contour clarity of boundaries and simulate the characteristics of CMDB propellant slurry reflux movement caused by the convergent flow near the outlet.Compared with the gap,the increased rotational rate of roller could promote the reflux movement and intensify the shear flow of slurry inside the flow region by viscous shear dragging.Meanwhile,under the synergistic effect of contact heat transfer as well as convective heat exchange,heat accumulated near the outlet and diffused along the reflux movement,which led to the countercurrent heat dissipation behavior of CMDB propellant slurry.The plasticizing mechanism of slurry and the safety of calendering under different conditions were explored,which provided theoretical guidance and reference data for the optimization of calendering process conditions.Based on the simulation results,the safety of the CMDB propellant calendering process could be significantly improved with a few tests conducted during a short research and development cycle.展开更多
This study examines the microstructure,mechanical properties(with a focus on room-temperature toughness),and oxidation resistance of Ho-doped NbDSi based in-situ composites.The base alloy consists of the coarse primar...This study examines the microstructure,mechanical properties(with a focus on room-temperature toughness),and oxidation resistance of Ho-doped NbDSi based in-situ composites.The base alloy consists of the coarse primary Nb_(5)Si_(3)phase and the Nb_(5)Si_(3)+Nbss(Nb solid solution)eutectic cells.Ho doping influences the solidification path.When the Ho doping is higher than0.2 at%,the alloys transform into eutectic alloys.Ho can be solid-solved in trace amounts in the Nbss phase.However,most of Ho forms a stable Ho oxide phase,which alleviates oxygen contamination problem to some extent.Moreover,the interface separation between Ho oxide and other phases reduces the plastic deformation constraint.Thus,with 0.4 at%Ho doping,the K_(Q)value is18.03 MPa·m^(1/2),which is 31.1%higher than that of the base alloy.The strength of the Ho-doped alloys does not deteriorate with an increase in toughness.However,the large network-like Ho_(2)O_(3)in the 0.8Ho alloy causes a decrease in toughness and strength.In addition,the Ho oxide phase effectively blocks the inward oxygen intrusion.With 0.8 at%Ho doping,the oxidation mass gain per unit area is 10.16 mg·cm^(2),which is 39.7%lower than that of the base alloy.展开更多
Interactions between different components in α-starch based composite binder for green sand mould/core were investigated by using XRD, IR spectra, 1H NMR spectra and SEM. Several adhesive hardening structures and the...Interactions between different components in α-starch based composite binder for green sand mould/core were investigated by using XRD, IR spectra, 1H NMR spectra and SEM. Several adhesive hardening structures and theories of the binder at room temperature were proposed according to the interactions between various compositions. Thus, the reasons for the binder to have excellent combination properties and unique adhesive bonding and self-curing characteristics were explained by these theories successfully. And the theories are of great directive importance to design and development of composite binder for green sand mould/core.展开更多
The emerging biomass-based epoxy vitrimers hold great potential to fulfill the requirements for sustainable development of society.Since the existence of dynamic chemical bonds in vitrimers often reduces both the ther...The emerging biomass-based epoxy vitrimers hold great potential to fulfill the requirements for sustainable development of society.Since the existence of dynamic chemical bonds in vitrimers often reduces both the thermal and mechanical properties of epoxy resins, it is challenging to produce recyclable epoxy vitrimers with both excellent mechanical properties and good thermal stability. Herein, a monomer 4-(((5-(hydroxymethyl)furan-2-yl)methylene)amino)phenol(FCN) containing furan ring with potential to form high density of hydrogen bonding among repeating units is designed and copolymerized with glycerol triglycidyl ether to yield epoxy resin(FCN-GTE), which intrinsically has dual hydrogen bond networks, dynamic imine structure and resultant high performance. Importantly, as compared to the BPA-GTE, the FCN-GTE exhibits significantly improved mechanical properties owing to the increased density of hydrogen bond network and physical crosslinking interaction. Furthermore, density functional theory(DFT) calculation and in situ FTIR analysis is conducted to decipher the formation mechanism of hydrogen bond network. In addition, the FCN-GTE possesses superior UV shielding, chemical degradation, and recyclability because of the existence of abundant imine bonds. Notably, the FCN-GTE-based carbon fiber composites could be completely recycled in an amine solution.This study provides a facile strategy for synthesizing recyclable biomass-based high-performance epoxy vitrimers and carbon fiber composites.展开更多
The animal experiment of viscose carbon fiber based C/C composites applied in bone defection intramedullary fixation was carried out in New Zealand white rabbits.The histological observation on the 100th day after sur...The animal experiment of viscose carbon fiber based C/C composites applied in bone defection intramedullary fixation was carried out in New Zealand white rabbits.The histological observation on the 100th day after surgical operation indicated that the experimental animals recovered well and the bone defect area was reconstructed by new bone trabecula.Immunohistochemical observation of leukocyte common antigen and macrophage suggested that intramedullary fixation materials did not induct any chronic toxicity reactions such as inflammatory reactions,macrophage reactions and formation of granulation tissue.The tissue compatibility of this material was excellent.Meanwhile,the impurity element species and the biological toxic element content of viscose fiber based C/C composites were determined by atomic fluorescence analyzer and inductively coupled plasma atomic emission spectrometry.The results reveal that there are few biological toxic elements in the viscose fiber based C/C composites and it can satisfy the constituent demands of surgical implants.展开更多
Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of c...Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.展开更多
A combined structure with the unit cell consisting of four sub-units with 90° rotation in turn is designed. Each of sub-units is composed of two gold rods in transverse arrangement and one gold rod in longitudina...A combined structure with the unit cell consisting of four sub-units with 90° rotation in turn is designed. Each of sub-units is composed of two gold rods in transverse arrangement and one gold rod in longitudinal arrangement. Simulating electromagnetic responses of the structure, we verify that the structure exhibits the double Fano resonances, which originate from the coupling between magnetic quadrupoles and electric dipoles and the coupling between electric quadrupoles and electric dipoles. Simulation results also demonstrate that the structure is polarization-insensitive and shows an analogue of electromagnetically induced transparency at the two Fano resonances. Such a plasmonic structure has potential applications in photoelectric elements.展开更多
The enhancement of interface bonding between cement and polymerand the structural reticula-tion of the water-soluble polymer areproposed to minimize the shortening of the mechanical properties ofmacro-de-fect-free(MDF...The enhancement of interface bonding between cement and polymerand the structural reticula-tion of the water-soluble polymer areproposed to minimize the shortening of the mechanical properties ofmacro-de-fect-free(MDF)cement based composites at high relativehumidity.The MDF composites incorporated with vari-ouscross-coupling agents studied experimentally.The results show thatthe MDF composites modified with small amounts of cross-couplingagent had raised mechanical properties,but it is more important thatthe modified MDF composites had a significant increase in waterresistance compared to the original one.展开更多
In spray atomization and codeposition, a molten stream of metal is disintegrated into a fine dispersion of droplets by high velocity gas jets. The resulting semi-solidified droplets are directed towards a substrate wh...In spray atomization and codeposition, a molten stream of metal is disintegrated into a fine dispersion of droplets by high velocity gas jets. The resulting semi-solidified droplets are directed towards a substrate where they impact and collect as rapidly solidified splats. Relatively high rates of solidification are achieved as a result of the thinness of the splats and the rapid heat extraction during flight and upon impacting with the substrate. The processing method uses codeposition of the metallic semi-solidified droplets (metallic matrix) with the injected reinforcement ceramic particles. In the present paper, the microstructures, mechanical properties, interfacial properties, thermal stability and aging behaviour of spray atomized and codeposited Al-Li-X MMC's (injected X=SiC, Al2O3) are reported and correlated to the processing conditions.展开更多
The increased demand for superior materials has highlighted the need of investigating the mechanical properties of composites to achieve enhanced constitutive relationships.Fiber-reinforced polymer composites have eme...The increased demand for superior materials has highlighted the need of investigating the mechanical properties of composites to achieve enhanced constitutive relationships.Fiber-reinforced polymer composites have emerged as an integral part of materials development with tailored mechanical properties.However,the complexity and heterogeneity of such composites make it considerably more challenging to have precise quantification of properties and attain an optimal design of structures through experimental and computational approaches.In order to avoid the complex,cumbersome,and labor-intensive experimental and numerical modeling approaches,a machine learning(ML)model is proposed here such that it takes the microstructural image as input with a different range of Young’s modulus of carbon fibers and neat epoxy,and obtains output as visualization of the stress component S11(principal stress in the x-direction).For obtaining the training data of the ML model,a short carbon fiberfilled specimen under quasi-static tension is modeled based on 2D Representative Area Element(RAE)using finite element analysis.The composite is inclusive of short carbon fibers with an aspect ratio of 7.5that are infilled in the epoxy systems at various random orientations and positions generated using the Simple Sequential Inhibition(SSI)process.The study reveals that the pix2pix deep learning Convolutional Neural Network(CNN)model is robust enough to predict the stress fields in the composite for a given arrangement of short fibers filled in epoxy over the specified range of Young’s modulus with high accuracy.The CNN model achieves a correlation score of about 0.999 and L2 norm of less than 0.005 for a majority of the samples in the design spectrum,indicating excellent prediction capability.In this paper,we have focused on the stage-wise chronological development of the CNN model with optimized performance for predicting the full-field stress maps of the fiber-reinforced composite specimens.The development of such a robust and efficient algorithm would significantly reduce the amount of time and cost required to study and design new composite materials through the elimination of numerical inputs by direct microstructural images.展开更多
The electrical characteristics of cement-based material can be remarkably improved by the addition of short carbon fibers. Carbon fiber reinforced cement composite (CFRC) is an intrinsically smart material that can se...The electrical characteristics of cement-based material can be remarkably improved by the addition of short carbon fibers. Carbon fiber reinforced cement composite (CFRC) is an intrinsically smart material that can sense not only the stress and strain, but also the temperature. In this paper, variations of electrical resistivity with external applied load, and relation of thermoelectric force and temperature were investigated. Test results indicated that the electrical signal is related to the increase in the material volume resistivity during crack generation or propagation and the decrease in the resistivity during crack closure. Moreover, it was found that the fiber addition increased the linearity and reversibility of the Seebeck effect in the cement-based materials. The change of electrical characteristics reflects large amount of information of inner damage and temperature differential of composite, which can be used for stress-strain or thermal self-monitoring by embedding it in the concrete structures.展开更多
The results of some interesting investigation on the piezoresistivity of carbon fiber reinforced cement based composites (CFRC) are presented with the prospect of developing a new nondestructive testing method to asse...The results of some interesting investigation on the piezoresistivity of carbon fiber reinforced cement based composites (CFRC) are presented with the prospect of developing a new nondestructive testing method to assess the integrity of the composite. The addition of short carbon fibers to cement-based mortar or concrete improves the structural performance and at the same time significantly decreases the bulk electrical resistivity. This makes CFRC responsive to the smart behavior by measuring the resistance change with uniaxial pressure. The piezoresistivity of CFRC under different stress was studied, at the same time the damage occurring inner specimens was detected by acoustic emission as well. Test results show that there exists a marking pressure dependence of the conductivity in CFRC, in which the so-called negative pressure coefficient of resistive (NPCR) and positive pressure coefficient of resistive (PPCR) are observed under low and high pressure. Under constant pressures, time-dependent resistivity is an outstanding characteristic for the composites, which is defined as resistance creep. The breakdown and rebuild-up process of conductive network under pressure may be responsible for the pressure dependence of resistivity.展开更多
Concrete is a continuously evolving material, and even the definition of high-performance concrete has changed over time. In this paper, high-performance characteristics of concrete material are considered to be those...Concrete is a continuously evolving material, and even the definition of high-performance concrete has changed over time. In this paper, high-performance characteristics of concrete material are considered to be those that support the desirable durability, resilience, and sustainability of civil infrastructure that directly impact our quality of life. It is proposed that high-performance material characteristics include tensile ductility, autogenous crack-width control, and material “greenness.” Furthermore, smart functionalities should be aimed at enhancing infrastructure durability, resilience, and sustainability by responding to changes in the surrounding environment of the structure in order to perform desirable functions, thus causing the material to behave in a manner more akin to certain biological materials. Based on recent advances in engineered cementitious composites (ECCs), this paper suggests that concrete embodying such high-performance characteristics and smart multifunctionalities can be designed, and holds the potential to fulfill the expected civil infrastructure needs of the 21st century. Highlights of relevant properties of ECCs are provided, and directions for necessary future research are indicated.展开更多
文摘Because of an unfortunate mistake by authors,the Project(5227010679)of Foundation item was wrong.The corrected Project is shown as follows:Project(52271073).
基金Project(51174244) supported by the National Natural Science Foundation of ChinaProject(CDJZR11130005) supported by the Fundamental Research Funds for the Central Universities,China
文摘An aluminum-based in-situ composites reinforced with Mg2Si and Si particles were produced by centrifugal casting A1-20Si-5Mg alloy. The microstructure of the composites was examined, and the effects of temperature on fracture behavior of the composite were investigated. The results show that the average fraction of primary Si and Mg2Si particles in the composites is as high as 38%, and ultimate tensile strengths （UTS） of the composites first increase then decrease with the increase of test temperature. Microstructures of broken specimens show that both the particle fracture and the interface debonding affect the fracture behavior of the composites, and the interface debonding becomes the dominant fracture mechanism with increasing test temperature. Comparative results indicate that rich particles in the composites and excellent interface strength play great roles in enhancing tensile property by preventing the movement of dislocations.
基金financially supported by the National Natural Science Foundation of China(Nos.51735005 and 51575267)the National Key Research and Development Program “Additive Manufacturing and Laser Manufacturing”(No.2016YFB1100101)
文摘Electrochemical measurements on three planes of TiC/Inconel 718 composites fabricated by selective laser melting(SLM) were performed to study the corrosion property. The results showed that the YZplane with dense and fine columnar structures possessed high microhardness and superior corrosion resistance in 3.5 wt% NaCl solution. For the XZ-plane, a decreased anti-corrosion property was observed owing to its inhomogeneous microstructures. While the XY-plane with large irregular pores and clustered ring-like structures was more susceptible to corrosion compared with the other two planes. Comparative analysis suggested that the anisotropic corrosion behaviors were significantly dependent on the surface defects, microstructure characteristics and added reinforcements.
基金the support of IMDEA Materials Institute of Spainsupported by the National Natural Science Foundation of China(Project Nos.52072303 and 51821091)。
文摘In this work,the microstructure,failure behavior and interfacial properties with respective to the interfacial domain in SiCf/BN/SiC and C_(f)/PyC/SiC composites were studied via the fiber push-in test.The differences in the mechanical response of the interfacial domain were observed.During the fiber push-in test for SiCf/BN/SiC,the interface debonding accompanied with interphase fracture occurred,resulting in an obvious sign of the onset of debonding on loading-displacement(P-u)curves.While the good continuity of P-u curves can be observed for Cf/PyC/SiC,which is due to that the failure is in the form of interface debonding along with interphase lateral slipping caused by the extension of buckled carbon fiber,without any interphase fracture.The interfacial properties calculated from the fiber push-in test show that Cf/PyC/SiC possesses a weaker interfacial domain compared with SiC_(f)/BN/SiC.The interfacial shear stress of SiCf/BN/SiC and C_(f)/PyC/SiC composites amounts 94.2 and 48.1 MPa,respectively.
文摘Transient liquid phase (TLP) bonded aluminium based metal matrix composite (MMC) joints can be classified into three distinct regions, i.e. the particulate segregation region, the denuded particulate region and the base material region. The microstructure of the particulate segregation region consists of alumina particulate and Al alloy matrix with the Al 2Cu and MgAl 2O 4. It contains more and smaller alumina particulates compared with the base material region. The TLP bonded joints have the tensile strength of 150 MPa ～200 MPa and the shear strength of 70 MPa ～100 MPa . With increasing tensile stress, cracks initiate in the particulate segregation region, especially in the particulate/particulate interface and the particulate/matrix interface, and propagate along particulate/matrix interface, througth thin matrix metal and by linking up the close cracks. The particulate segregation region is the weakest during tensile testing and shear testing due to obviously increased proportion of weak bonds (particulate particulate bond and particulate matrix bond).
基金supported by the Natural Science Foundation of China(No.10772070)National Basic Research Program of China(No.2011CB013800)
文摘A surrogate based particle swarm optimization （SBPSO） algorithm which combines the surrogate modeling technique and particle swarm optimization is applied to the reliability- based robust design （RBRD） of composite pressure vessels. The algorithm and efficiency of SBPSO are displayed through numerical examples. A model for filament-wound composite pressure vessels with metallic liner is then studied by netting analysis and its responses are analyzed by using Finite element method （performed by software ANSYS）. An optimization problem for maximizing the performance factor is formulated by choosing the winding orientation of the helical plies in the cylindrical portion, the thickness of metal liner and the drop off region size as the design variables. Strength constraints for composite layers and the metal liner are constructed by using Tsai-Wu failure criterion and Mises failure criterion respectively. Numerical examples show that the method proposed can effectively solve the RBRD problem, and the optimal results of the proposed model can satisfy certain reliability requirement and have the robustness to the fluctuation of design variables.
基金supported by National Natural Science Foundation of China(No.42172319)the Fundamental Research Funds for the Central Universities(No.2023ZKPYLJ01)。
文摘The development and utilization of lunar resources are entering a critical stage.Immediate focus is needed on key technologies for in-situ resource utilization(ISRU)and lunar base construction.This paper comparatively analyzes the basic characteristics of lunar regolith samples returned from Chang'e-5(CE-5),Apollo,and Luna missions,focusing on their physical,mechanical,mineral,chemical,and morphological parameters.Given the limited availability of lunar regolith,more than 50 lunar regolith simulants are summarized.The differences between lunar regolith and simulants concerning these parameters are discussed.To facilitate the construction of lunar bases,this article summarizes the advancements in research on construction materials derived from lunar regolith simulants.Based on statistical results,lunar regolith simulant-based composites are classified into 5 types by their strengthening and toughening mechanisms,and a comprehensive analysis of molding methods,preparation conditions,and mechanical properties is conducted.Furthermore,the potential lunar base construction forms are reviewed,and the adaptability of lunar regolith simulant-based composites and lunar base construction methods are proposed.The key demands of lunar bases constructed with lunar regolith-based composites are discussed,including energy demand,in-situ buildability,service performance,and structural availability.This progress contributes to providing essential material and methodological support for future lunar construction.
文摘The frequent occurrence of safety accidents during the calendering process is caused by the flammable and explosive properties of composite modified double-base(CMDB)propellant.Optimization of process parameters with the aid of fluid simulation technology could effectively ensure the safety of the calendering process.To improve the accuracy of the simulation results,material parameters and model structure were corrected based on actual conditions,and adaptive grid technology was applied in the local mesh refinement.In addition,the rheological behavior,motion trajectories and heat transfer mechanisms of CMDB propellant slurry were studied with different gaps,rotational rates and temperatures of two rollers.The results indicated that the refined mesh could significantly improve the contour clarity of boundaries and simulate the characteristics of CMDB propellant slurry reflux movement caused by the convergent flow near the outlet.Compared with the gap,the increased rotational rate of roller could promote the reflux movement and intensify the shear flow of slurry inside the flow region by viscous shear dragging.Meanwhile,under the synergistic effect of contact heat transfer as well as convective heat exchange,heat accumulated near the outlet and diffused along the reflux movement,which led to the countercurrent heat dissipation behavior of CMDB propellant slurry.The plasticizing mechanism of slurry and the safety of calendering under different conditions were explored,which provided theoretical guidance and reference data for the optimization of calendering process conditions.Based on the simulation results,the safety of the CMDB propellant calendering process could be significantly improved with a few tests conducted during a short research and development cycle.
基金supported by the National Natural Science Foundation of China(Nos.51825401 and 52374384)the Fundamental Research Funds for the Central Universities(No.2023FRFK06014).
文摘This study examines the microstructure,mechanical properties(with a focus on room-temperature toughness),and oxidation resistance of Ho-doped NbDSi based in-situ composites.The base alloy consists of the coarse primary Nb_(5)Si_(3)phase and the Nb_(5)Si_(3)+Nbss(Nb solid solution)eutectic cells.Ho doping influences the solidification path.When the Ho doping is higher than0.2 at%,the alloys transform into eutectic alloys.Ho can be solid-solved in trace amounts in the Nbss phase.However,most of Ho forms a stable Ho oxide phase,which alleviates oxygen contamination problem to some extent.Moreover,the interface separation between Ho oxide and other phases reduces the plastic deformation constraint.Thus,with 0.4 at%Ho doping,the K_(Q)value is18.03 MPa·m^(1/2),which is 31.1%higher than that of the base alloy.The strength of the Ho-doped alloys does not deteriorate with an increase in toughness.However,the large network-like Ho_(2)O_(3)in the 0.8Ho alloy causes a decrease in toughness and strength.In addition,the Ho oxide phase effectively blocks the inward oxygen intrusion.With 0.8 at%Ho doping,the oxidation mass gain per unit area is 10.16 mg·cm^(2),which is 39.7%lower than that of the base alloy.
基金This work was supported by the China Postdoctoral Science Foundation(China Fund[1998]6)that was entitled“Synthesis of Modified Starch Binder and Its Application in Foundry”.Authors would like to thank academician Jinzong YANG and lecturer Hua ZHANG for the kind analyses and discussions.
文摘Interactions between different components in α-starch based composite binder for green sand mould/core were investigated by using XRD, IR spectra, 1H NMR spectra and SEM. Several adhesive hardening structures and theories of the binder at room temperature were proposed according to the interactions between various compositions. Thus, the reasons for the binder to have excellent combination properties and unique adhesive bonding and self-curing characteristics were explained by these theories successfully. And the theories are of great directive importance to design and development of composite binder for green sand mould/core.
基金financially supported by the National Natural Science Foundation of China (Nos.51973118, 22175121,52003160 and 22001175)Key-Area Research and Development Program of Guangdong Province (Nos.2019B010941001 and2019B010929002)+7 种基金the Natural Science Foundation of Guangdong Province (No.2020A1515010644)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(No.2019ZT08C642)Shenzhen Science and Technology Program (Nos.JCYJ20220818095810022, JSGGZD20220822095201003 and JCYJ20210324095412035)the start-up fund of Shenzhen University (No.000002110820)the Guangdong Natural Science Foundation (Nos.2022A1515011781 and2021A1515110086)Science and Technology Innovation Commission of Shenzhen,China (Nos.RCBS20200714114910141 and JCYJ20210324132816039)the Start-up Grant at Harbin Institute of Technology (Shenzhen),China (Nos.HA45001108 and HA11409049)Shenzhen Key Laboratory of Advanced Functional Carbon Materials Research and Comprehensive Application (No.ZDSYS20220527171407017)。
文摘The emerging biomass-based epoxy vitrimers hold great potential to fulfill the requirements for sustainable development of society.Since the existence of dynamic chemical bonds in vitrimers often reduces both the thermal and mechanical properties of epoxy resins, it is challenging to produce recyclable epoxy vitrimers with both excellent mechanical properties and good thermal stability. Herein, a monomer 4-(((5-(hydroxymethyl)furan-2-yl)methylene)amino)phenol(FCN) containing furan ring with potential to form high density of hydrogen bonding among repeating units is designed and copolymerized with glycerol triglycidyl ether to yield epoxy resin(FCN-GTE), which intrinsically has dual hydrogen bond networks, dynamic imine structure and resultant high performance. Importantly, as compared to the BPA-GTE, the FCN-GTE exhibits significantly improved mechanical properties owing to the increased density of hydrogen bond network and physical crosslinking interaction. Furthermore, density functional theory(DFT) calculation and in situ FTIR analysis is conducted to decipher the formation mechanism of hydrogen bond network. In addition, the FCN-GTE possesses superior UV shielding, chemical degradation, and recyclability because of the existence of abundant imine bonds. Notably, the FCN-GTE-based carbon fiber composites could be completely recycled in an amine solution.This study provides a facile strategy for synthesizing recyclable biomass-based high-performance epoxy vitrimers and carbon fiber composites.
基金the Fundamental Research Funds for the Central Universities of China(No.11CX04033A)the Postdoctoral Innovation Projection of Shandong Province(No.201103085)
文摘The animal experiment of viscose carbon fiber based C/C composites applied in bone defection intramedullary fixation was carried out in New Zealand white rabbits.The histological observation on the 100th day after surgical operation indicated that the experimental animals recovered well and the bone defect area was reconstructed by new bone trabecula.Immunohistochemical observation of leukocyte common antigen and macrophage suggested that intramedullary fixation materials did not induct any chronic toxicity reactions such as inflammatory reactions,macrophage reactions and formation of granulation tissue.The tissue compatibility of this material was excellent.Meanwhile,the impurity element species and the biological toxic element content of viscose fiber based C/C composites were determined by atomic fluorescence analyzer and inductively coupled plasma atomic emission spectrometry.The results reveal that there are few biological toxic elements in the viscose fiber based C/C composites and it can satisfy the constituent demands of surgical implants.
基金National Key Research and Development Project of China(No.2018YFB1701200)。
文摘Aiming at the problems of low reliability and complex operation of traditional coin-tap test of composite material,this paper introduces the grey system theory and achieves better performance.The response signals of coin-tap are classified through the grey clustering based on relation analysis,and corresponding improvements are made to the calculation method of the relation degree of nearness.First,the time history of acceleration is taken as the system behavior sequence.The improved correlation calculation method is used to solve the relation degree of nearness between the sequences,and the matrix of degree of grey relation is constructed based on this.Then,the sequence groups are summarized through the matrix,and the response signals of coin-tap are qualitatively classified according to the location of the reference sequence.Finally,the defect detection of composite materials is completed without pre-testing.The test results show that the accuracy of the coin-tap test based on improved grey clustering reaches 100%,which simplifies the operation steps while ensuring the reliability of the coin-tap test results.
基金Supported by the National Innovative Projects for College Students under Grant No 201310320025the National Natural Science Foundation of China under Grant Nos 61401182 and 61372057the Priority Academic Program Development of Jiangsu Higher Education Institutions of China
文摘A combined structure with the unit cell consisting of four sub-units with 90° rotation in turn is designed. Each of sub-units is composed of two gold rods in transverse arrangement and one gold rod in longitudinal arrangement. Simulating electromagnetic responses of the structure, we verify that the structure exhibits the double Fano resonances, which originate from the coupling between magnetic quadrupoles and electric dipoles and the coupling between electric quadrupoles and electric dipoles. Simulation results also demonstrate that the structure is polarization-insensitive and shows an analogue of electromagnetically induced transparency at the two Fano resonances. Such a plasmonic structure has potential applications in photoelectric elements.
文摘The enhancement of interface bonding between cement and polymerand the structural reticula-tion of the water-soluble polymer areproposed to minimize the shortening of the mechanical properties ofmacro-de-fect-free(MDF)cement based composites at high relativehumidity.The MDF composites incorporated with vari-ouscross-coupling agents studied experimentally.The results show thatthe MDF composites modified with small amounts of cross-couplingagent had raised mechanical properties,but it is more important thatthe modified MDF composites had a significant increase in waterresistance compared to the original one.
文摘In spray atomization and codeposition, a molten stream of metal is disintegrated into a fine dispersion of droplets by high velocity gas jets. The resulting semi-solidified droplets are directed towards a substrate where they impact and collect as rapidly solidified splats. Relatively high rates of solidification are achieved as a result of the thinness of the splats and the rapid heat extraction during flight and upon impacting with the substrate. The processing method uses codeposition of the metallic semi-solidified droplets (metallic matrix) with the injected reinforcement ceramic particles. In the present paper, the microstructures, mechanical properties, interfacial properties, thermal stability and aging behaviour of spray atomized and codeposited Al-Li-X MMC's (injected X=SiC, Al2O3) are reported and correlated to the processing conditions.
基金financial support received from DST-SERBSRG/2020/000997,Indiathe initiation grant received from IIT Kanpur。
文摘The increased demand for superior materials has highlighted the need of investigating the mechanical properties of composites to achieve enhanced constitutive relationships.Fiber-reinforced polymer composites have emerged as an integral part of materials development with tailored mechanical properties.However,the complexity and heterogeneity of such composites make it considerably more challenging to have precise quantification of properties and attain an optimal design of structures through experimental and computational approaches.In order to avoid the complex,cumbersome,and labor-intensive experimental and numerical modeling approaches,a machine learning(ML)model is proposed here such that it takes the microstructural image as input with a different range of Young’s modulus of carbon fibers and neat epoxy,and obtains output as visualization of the stress component S11(principal stress in the x-direction).For obtaining the training data of the ML model,a short carbon fiberfilled specimen under quasi-static tension is modeled based on 2D Representative Area Element(RAE)using finite element analysis.The composite is inclusive of short carbon fibers with an aspect ratio of 7.5that are infilled in the epoxy systems at various random orientations and positions generated using the Simple Sequential Inhibition(SSI)process.The study reveals that the pix2pix deep learning Convolutional Neural Network(CNN)model is robust enough to predict the stress fields in the composite for a given arrangement of short fibers filled in epoxy over the specified range of Young’s modulus with high accuracy.The CNN model achieves a correlation score of about 0.999 and L2 norm of less than 0.005 for a majority of the samples in the design spectrum,indicating excellent prediction capability.In this paper,we have focused on the stage-wise chronological development of the CNN model with optimized performance for predicting the full-field stress maps of the fiber-reinforced composite specimens.The development of such a robust and efficient algorithm would significantly reduce the amount of time and cost required to study and design new composite materials through the elimination of numerical inputs by direct microstructural images.
基金This work was supported by NSFC(No.59908007)a foundation for phosphor plan from the Science and Technology Committee of Shanghai Municipality(No.01QE14052)The financial support from the Foundation for the University Key Studies of Shanghai was also gratefully acknowledged.
文摘The electrical characteristics of cement-based material can be remarkably improved by the addition of short carbon fibers. Carbon fiber reinforced cement composite (CFRC) is an intrinsically smart material that can sense not only the stress and strain, but also the temperature. In this paper, variations of electrical resistivity with external applied load, and relation of thermoelectric force and temperature were investigated. Test results indicated that the electrical signal is related to the increase in the material volume resistivity during crack generation or propagation and the decrease in the resistivity during crack closure. Moreover, it was found that the fiber addition increased the linearity and reversibility of the Seebeck effect in the cement-based materials. The change of electrical characteristics reflects large amount of information of inner damage and temperature differential of composite, which can be used for stress-strain or thermal self-monitoring by embedding it in the concrete structures.
文摘The results of some interesting investigation on the piezoresistivity of carbon fiber reinforced cement based composites (CFRC) are presented with the prospect of developing a new nondestructive testing method to assess the integrity of the composite. The addition of short carbon fibers to cement-based mortar or concrete improves the structural performance and at the same time significantly decreases the bulk electrical resistivity. This makes CFRC responsive to the smart behavior by measuring the resistance change with uniaxial pressure. The piezoresistivity of CFRC under different stress was studied, at the same time the damage occurring inner specimens was detected by acoustic emission as well. Test results show that there exists a marking pressure dependence of the conductivity in CFRC, in which the so-called negative pressure coefficient of resistive (NPCR) and positive pressure coefficient of resistive (PPCR) are observed under low and high pressure. Under constant pressures, time-dependent resistivity is an outstanding characteristic for the composites, which is defined as resistance creep. The breakdown and rebuild-up process of conductive network under pressure may be responsible for the pressure dependence of resistivity.
基金supported by a grant from the CMMI program at the United States National Science Foundation(1634694).
文摘Concrete is a continuously evolving material, and even the definition of high-performance concrete has changed over time. In this paper, high-performance characteristics of concrete material are considered to be those that support the desirable durability, resilience, and sustainability of civil infrastructure that directly impact our quality of life. It is proposed that high-performance material characteristics include tensile ductility, autogenous crack-width control, and material “greenness.” Furthermore, smart functionalities should be aimed at enhancing infrastructure durability, resilience, and sustainability by responding to changes in the surrounding environment of the structure in order to perform desirable functions, thus causing the material to behave in a manner more akin to certain biological materials. Based on recent advances in engineered cementitious composites (ECCs), this paper suggests that concrete embodying such high-performance characteristics and smart multifunctionalities can be designed, and holds the potential to fulfill the expected civil infrastructure needs of the 21st century. Highlights of relevant properties of ECCs are provided, and directions for necessary future research are indicated.
