By introducing a fatigue blunting factor, the cyclic elasto-plastic Hutchinson-Rice-Rosengren （HRR） field near the crack tip under the cyclic loading is modified. And, an average damage per loading-cycle in the cycl...By introducing a fatigue blunting factor, the cyclic elasto-plastic Hutchinson-Rice-Rosengren （HRR） field near the crack tip under the cyclic loading is modified. And, an average damage per loading-cycle in the cyclic plastic deformation region is defined due to Manson-Coffin law. Then, according to the linear damage accumulation theory-Miner law, a new model for predicting the fatigue crack growth （FCG） of the opening mode crack based on the low cycle fatigue （LCF） damage is set up. The step length of crack propagation is assumed to be the size of cyclic plastic zone. It is clear that every parameter of the new model has clearly physical meaning which does not need any human debugging. Based on the LCF test data, the FCG predictions given by the new model are consistent with the FCG test results of Cr2Ni2MoV and X12CrMoWVNbN 10-1-1. What＇s more, referring to the relative researches, the good predictability of the new model is also proved on six kinds of materials.展开更多
A modified nonlinear fatigue damage accumulation model based on the Manson-Halford theory was presented,and the new model was developed for fatigue life prediction under constant and variable amplitude loading, which ...A modified nonlinear fatigue damage accumulation model based on the Manson-Halford theory was presented,and the new model was developed for fatigue life prediction under constant and variable amplitude loading, which took the effects of the load interactions and the phenomenon of material's strength degradation into account. The experimental data of the 30 Cr Mn Si A and the LY-12 cz from literature were used to verify the proposed model. And from the good agreement between the experimental data and predicted results,we can see it clear that the proposed method can be applied to predicting fatigue life under different loadings.展开更多
The nonlinear cumulative damage model is modified to have high prediction accuracy when the high-low cycle stress frequency ratio m is large(m500).The low cycle fatigue(LCF)tests,high cycle fatigue(HCF)tests and combi...The nonlinear cumulative damage model is modified to have high prediction accuracy when the high-low cycle stress frequency ratio m is large(m500).The low cycle fatigue(LCF)tests,high cycle fatigue(HCF)tests and combined high and low cycle fatigue(CCF)tests of TC11 titanium alloy were carried out,and the influencing factors of CCF life were analysed.The CCF life declines with the decrease of the ratio of high-low cycle stress frequency m.Both linear and nonlinear cumulative damage models are used to predict the CCF life.The CCF life prediction error of the linear cumulative damage model is great and the predictions tend to be overestimated,which is dangerous for engineering application.The accuracy is relatively high when the high-low cycle stress frequency ratio m500.The accuracy of nonlinear cumulative damage model is higher than that of linear model when the high-low cycle stress frequency ratio m500.Based on the relationship between high cycle average stress rmajor and material yield limit rp,0.2,a correction term is added to the nonlinear cumulative damage model and verified,which made the modified model more accurate when m500.展开更多
In this study,an experimental analysis for determining the fatigue strength of HDPE-100 under cyclic loading is presented.The curve of cumulative fatigue damage versus number of cycles(D-N)was deduced from stiffness d...In this study,an experimental analysis for determining the fatigue strength of HDPE-100 under cyclic loading is presented.The curve of cumulative fatigue damage versus number of cycles(D-N)was deduced from stiffness degradation.Based on the three stage damage trend,the remaining fatigue life is numerically predicted by considering a double term power damage accumulation model.This model is found to be accurate,both in modeling the rapid damage growth in the early life and near the end of the fatigue life.Numerical results illustrate that the proposed model is capable of accurately fitting several different sets of experimental data.展开更多
Precision and low damage grinding of aviation optical elements can effectively improve the overall processing efficiency.The mechanism of high-speed cross scuffing of multiple abrasive particles has become an importan...Precision and low damage grinding of aviation optical elements can effectively improve the overall processing efficiency.The mechanism of high-speed cross scuffing of multiple abrasive particles has become an important factor affecting the forming quality of workpiece.Interaction of abrasive trajectory determines machined surface and subsurface morphology and damage.According to the relative motion trajectory of wear particles on the workpiece surface,a theoretical model of the trochoidal trajectory intersection angle is proposed.High-speed scratches with different cross angles are experimentally obtained to explore the interference mechanism and damage accumulation of cross scratches.The results indicate that the Crack system I and Crack system II,produced by the two cross scratches,are mainly based on the stress principle and the strength principle,respectively.An increase in the damage radius is observed with a decrease in the crossing angle.Furthermore,as the duration of the normal cutting force decomposition curve at the entrance/exit of the intersection increases,the half-peak width also increases.The accumulation of cross-scratch damage promotes the propagation of deep subsurface lateral and median cracks.In other words,damage accumulation and interference mechanism formed by the cross scratches increase the longitudinal depth and lateral length of the damage.展开更多
When a nonlinear fatigue damage accumulation model based on damage curve approach is used to get better residual life prediction results, it is necessary to solve the problem caused by the uncertain exponent of the mo...When a nonlinear fatigue damage accumulation model based on damage curve approach is used to get better residual life prediction results, it is necessary to solve the problem caused by the uncertain exponent of the model. Considering the effects of load interaction, the assumption that there is a linear dependence between the exponent ratio and the loading ratio is established to predict fatigue residual life of materials. Three experimental data sets are used to validate the rightness of the proposition. The comparisons of experimental data and predictions show that the predictions based on the proposed proposition are in good accordance with the experimental results as long as the parameters that represent the linear correlativity are set an appropriate value. Meanwhile, the accuracy of the proposition is approximated to that of an existing model. Therefore, the proposition proposed in this paper is reasonable for residual life prediction.展开更多
The accuracy of the traditional assessment method of the quality of experience(Qo E) has been facing challenges with the growth of high-definition(HD) video streaming services.Image display-quality damage is the main ...The accuracy of the traditional assessment method of the quality of experience(Qo E) has been facing challenges with the growth of high-definition(HD) video streaming services.Image display-quality damage is the main factor that affects the Qo E in HD video services through UDP network transmission.In this paper,we introduce a novel objective factor known as image damage accumulation(IDA) to assess user's Qo E in HD video services.First,this paper quantitatively analyzed the effect on user quality of experience by IDA and established a mapping relationship between mean opinion scores and IDA.Furthermore,the probability of image damage caused by compression and transmission were analyzed.Based on this analysis,an objective Qo E assessment and prediction method for HD video stream service that evaluated the user experience according to IDA are proposed.The proposed method can achieve assessment and prediction accuracy on three distinct subjective tests.展开更多
The fatigue damage mechanism and life prediction on foreign carbon-fiber-reinforced pol-ymer(CFRP)reinforced bridge under high temperature in an asphalt pavement were investiga-ted.First,the subtropical hot and humid ...The fatigue damage mechanism and life prediction on foreign carbon-fiber-reinforced pol-ymer(CFRP)reinforced bridge under high temperature in an asphalt pavement were investiga-ted.First,the subtropical hot and humid construction environment in Bangladesh was introduced under which asphalt mastic bridge deck paving of Bangabandhu Bridge was carried on.Then the strains on a steel bar,concert and CFRP plate were adopted as parameters to investigate the fa-tigue crack evolution,load deflection curve variation characteristic and the CFRP plate stress of reinforced roof girder of the box girder.The girder crack resistance,stiffness and fatigue damage cumulative were analyzed.Finally,according to the laws of the fatigue crack propagation and the failure mode,the corresponding fracture mechanics analysis model was adopted combined with the experimented results,and the crack tip stress intensity factor calculation formula was intro-duced to investigate main fatigue crack propagation of specimens.The results show that the cracking of concrete and the development of the crack are effectively constrained by the CFRP plate in an asphalt layer construction under high-temperature conditions,and the fatigue life of the test beam reinforced with CFRP plates is prolonged to some extent,and the test beam can meet 2 million times the fatigue loading limits after the asphalt pavement construction under high-temperature.The fatigue life is predicted by da/dN-△K curves and crack propagation rate,and the fatigue life calculated by this method is in well agreement with the practical one.展开更多
The fatigue damage accumulation of [±20°] laminated steel cord reinforced rubber composite under T-T loading was studied. Results indicate that the increase in the cyclic maximum strain exhibits three-stage ...The fatigue damage accumulation of [±20°] laminated steel cord reinforced rubber composite under T-T loading was studied. Results indicate that the increase in the cyclic maximum strain exhibits three-stage tendency in the process of fatigue. The macroscopic fatigue damage initiates from the ends of steel cords in the form of cylindrical crack. Damage propagates along with the increase in crack numbers, the cord/matrix interface debonding and the growth of interply cracks. By using the dynamic creep as parameter, a linear fatigue damage accumulation model was established. This model can be used under dual loading conditions to estimate the residual fatigue life of the specimen.展开更多
Alternating shear stress is a critical factor in the accumulation of damage during rolling contact fatigue,severely limiting the service life of bearings.However,the specific mechanisms responsible for the cyclic shea...Alternating shear stress is a critical factor in the accumulation of damage during rolling contact fatigue,severely limiting the service life of bearings.However,the specific mechanisms responsible for the cyclic shear fatigue damage in bearing steel have not been fully understood.Here the mechanical response and microstructural evolution of a model GGr15 bearing steel under cyclic shear loading are investigated through the implementation of molecular dynamics simulations.The samples undergo 30 cycles under three different loading conditions with strains of 6.2%,9.2%,and 12.2%,respectively.The findings indicate that severe cyclic shear deformation results in early cyclic softening and significant accumulation of plastic damage in the bearing steel.Besides,samples subjected to higher strain-controlled loading exhibit higher plastic strain energy and shorter fatigue life.Additionally,strain localization is identified as the predominant damage mechanism in cyclic shear fatigue of the bearing steel,which accumulates and ultimately results in fatigue failure.Furthermore,simulation results also revealed the microstructural reasons for the strain localization(e.g.,BCC phase transformation into FCC and HCP phase),which well explained the formation of white etching areas.This study provides fresh atomic-scale insights into the mechanisms of cyclic shear fatigue damage in bearing steels.展开更多
Experime ntal research results of surface damage accumulation in rail steel under rolling with slippage are presented. Hertz contact for two rollers made of rail and whe el steels was realized in the test. The influe...Experime ntal research results of surface damage accumulation in rail steel under rolling with slippage are presented. Hertz contact for two rollers made of rail and whe el steels was realized in the test. The influence of loading regime upon wear of rail is considered. The estimation of characteristics of surface fracture resis tance for rail steel is made. The method to predict the life of rail steel under given conditions of regular loading is proposed.展开更多
The deepwater subsea wellhead(SW)system is the foundation for the construction of oil and gas wells and the crucial channel for operation.During riser connection operation,the SW system is subjected to cyclic dynamic ...The deepwater subsea wellhead(SW)system is the foundation for the construction of oil and gas wells and the crucial channel for operation.During riser connection operation,the SW system is subjected to cyclic dynamic loads which cause fatigue damage to the SW system,and continuously accumulated fatigue damage leads to fatigue failure of the SW system,rupture,and even blowout accidents.This paper proposes a hybrid Bayesian network(HBN)-based dynamic reliability assessment approach for deepwater SW systems during their service life.In the proposed approach,the relationship between the accumulation of fatigue damage and the fatigue failure probability of the SW system is predicted,only considering normal conditions.The HBN model,which includes the accumulation of fatigue damage under normal conditions and the other factors affecting the fatigue of the SW system,is subsequently developed.When predictive and diagnostic analysis techniques are adopted,the dynamic reliability of the SW system is achieved,and the most influential factors are determined.Finally,corresponding safety control measures are proposed to improve the reliability of the SW system effectively.The results illustrate that the fatigue failure speed increases rapidly when the accumulation fatigue damage is larger than 0.45 under normal conditions and that the reliability of the SW system is larger than 94%within the design life.展开更多
In order to accurately evaluate the creep-fatigue lifetime of GH720Li superalloy,a lifetime prediction model was established,reflecting the interaction between creep damage and low-cycle fatigue damage.The creep-fatig...In order to accurately evaluate the creep-fatigue lifetime of GH720Li superalloy,a lifetime prediction model was established,reflecting the interaction between creep damage and low-cycle fatigue damage.The creep-fatigue lifetime prediction results of GH720Li superalloy with an average grain size of 17.3μm were essentially within a scatter band of 2 times,indicating a strong agreement between the predicted lifetimes and experimental data.Then,considering that the grain size of the dual-property turbine disc decreases from the rim to the center,a grain-size-sensitive lifetime prediction model for creep-fatigue was established by introducing the ratio of grain boundary area.The improved model overcame the limitation of most traditional prediction methods,which failed to reflect the relationship between grain size and creep-fatigue lifetime.展开更多
A Combined Cycle Fatigue(CCF)life prediction model considering the effect of load sequence was proposed.To account for the interaction of high and low cycle fatigue,the CCF load was divided into two different loading ...A Combined Cycle Fatigue(CCF)life prediction model considering the effect of load sequence was proposed.To account for the interaction of high and low cycle fatigue,the CCF load was divided into two different loading paths of variable stress amplitude and stress ratio.Based on the iso-damage curves,a CCF life prediction model independent of fitting parameters was proposed,agreeing well with the experimental results.Finally,the effect of load sequence on CCF was discussed according to the fracture morphology of designed blade-like specimen.The results showed that the predicted CCF life was almost located in three-fold dispersion band for the LCF-HCF(LH)and HCF-LCF(HL)loading paths,especially for the average results of both.Compared with other models,the proposed model had better predictive and generalization abilities for multiple materials and variable experimental conditions.展开更多
A 1/3-scale reinfored concrete(RC) frame of unequal storey height with specially shaped columns was tested under low frequency cyclic loading.The damage characteristic,bearing capacity,deformation capacity and ductili...A 1/3-scale reinfored concrete(RC) frame of unequal storey height with specially shaped columns was tested under low frequency cyclic loading.The damage characteristic,bearing capacity,deformation capacity and ductility were analyzed.The restoring force model of the frame was obtained based on the study of the hysteresis curve measured in experiment,and the stiffness degeneration characteristics of every storey of the frame were analyzed.Finally the accumulated damage was analyzed with the damage assessment model.It is shown that the seismic behavior of this frame of unequal storey height with specially shaped columns is generally good,but the bottom of first floor column is a weak part,which should be paid more attention in design,and the restoring force model derived from this experiment can be seen as a valuable guide for design and non-linear finite element analysis for this kind of structure.展开更多
A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman-Raju formula is developed. The crack is regard...A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman-Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren （HRR） formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points： the deepest point and the surface point. The theoretical model is applied to semi-elliptic surface cracked A1 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.展开更多
New development trends in electronic operating data logging systems enable classification, recording and storage of load spectrums of mechanical transmission components during usage. Based on this fact, the applicatio...New development trends in electronic operating data logging systems enable classification, recording and storage of load spectrums of mechanical transmission components during usage. Based on this fact, the application of online reliability evaluation and reliability prediction procedures are presented. Different methods are considered to calculate reliability, depending on actual load spectrum and a Wohler curve. The prediction of a reliability trend is analyzed by the application of time series models. For this purpose, exponential smoothing model, regression model, and the ARIMA model are considered to evaluate data and predict an decreasing reliability trends during usage.展开更多
A novel method is presented to evaluate the complicated fatigue behavior of gears made of20Cr2Ni4 A.Fatigue tests are conducted in a high-frequency push-pull fatigue tester,and acoustic emission（AE）technique is used...A novel method is presented to evaluate the complicated fatigue behavior of gears made of20Cr2Ni4 A.Fatigue tests are conducted in a high-frequency push-pull fatigue tester,and acoustic emission（AE）technique is used to acquire metal fatigue signals.After analyzing large number of AE frequency spectrum,we find that：the crack extension can be expressed as the energy of specific frequency band,which is abbreviated as F-energy.To further validate the fatigue behavior,some correlation analysis is applied between F-energy and some AE parameters.Experimental results show that there is significant correlation among the Fenergy,root mean square（RMS）,relative energy,and hits.The findings can be used to validate the effectiveness of the F-energy in predicting fatigue crack propagation and remaining life for parts in-service.F-energy,as a new AE parameter,is first put forward in the area of fatigue crack growth.展开更多
Purpose–In view of the difficulty in determining the key parameters d in the Corten-Dolan model,based on the introduction of small loads,damage degrees and stress states to the Corten-Dolan model and the existing imp...Purpose–In view of the difficulty in determining the key parameters d in the Corten-Dolan model,based on the introduction of small loads,damage degrees and stress states to the Corten-Dolan model and the existing improved model,the sequential effects of the adjacent two-stage load were further considered.Design/methodology/approach–Two improved Corten-Dolan models were established on the basis of modifying the parameter d by two different methods,namely,increasing stress ratio coefficient as well as considering the effects of loading sequence and damage degree as independent influencing factors respectively.According to the test data of the welded joints of common materials(standard 45 steel),alloy materials(standard 16Mn steel)and Q235B steel,the validity and feasibility of the above two improved models for fatigue life prediction were verified.Findings–Results show that,compared with the traditional Miner model and the existing Corten-Dolan improved model,the two improved models have higher prediction accuracy in the fatigue life prediction of welding materials whether under two-stage load or multi-stage load.Originality/value–Because the mathematical expressions of the models are relatively simple and need no multi-layer iterative calculation,it is convenient to predict the fatigue life of welded structure in practical engineering.展开更多
The bow structure of FPSO moored by the single mooring system is rather complicated. There are many potential hot spots in connection parts of structures between the mooring support frame and the forecastle. Mooring f...The bow structure of FPSO moored by the single mooring system is rather complicated. There are many potential hot spots in connection parts of structures between the mooring support frame and the forecastle. Mooring forces, which are induced by wave excitation and transferred by the YOKE and the mooring support frame, may cause fatigue damage to the bow structure. Different from direct wave-in duced-forces, the mooring force consists of wave frequency force (WF) and 2nd dr aft low frequency force (LF) [3] , which are represented by two sets of short-term distribution respectively. Based on two sets of short-term distribution of moor ing forces obtained by the model test, the fatigue damage of the bow structure of FPSO is analyzed, with emphasis on two points. One is the procedure and position selection for fatigue check, and the other is the application of new formulae for the calculation of accumulative fatigue damage caused by two sets of short-term distribution of hot spot stress range. From the results distingui shed features of fatigue damage to the FPSO’s bow structure can be observed.展开更多
基金co-supported by National Natural Science Foundation of China (No. 11072205)College Students' National Innovation Foundation of China (No. 101061323)
文摘By introducing a fatigue blunting factor, the cyclic elasto-plastic Hutchinson-Rice-Rosengren （HRR） field near the crack tip under the cyclic loading is modified. And, an average damage per loading-cycle in the cyclic plastic deformation region is defined due to Manson-Coffin law. Then, according to the linear damage accumulation theory-Miner law, a new model for predicting the fatigue crack growth （FCG） of the opening mode crack based on the low cycle fatigue （LCF） damage is set up. The step length of crack propagation is assumed to be the size of cyclic plastic zone. It is clear that every parameter of the new model has clearly physical meaning which does not need any human debugging. Based on the LCF test data, the FCG predictions given by the new model are consistent with the FCG test results of Cr2Ni2MoV and X12CrMoWVNbN 10-1-1. What＇s more, referring to the relative researches, the good predictability of the new model is also proved on six kinds of materials.
基金National Natural Science Foundation of China(No.11272082)Fundamental Research Funds for the Central Universities(No.E022050205)the Open Research Fund of Key Laboratory of Fluid and Power Machinery of Xi Hua University,China(No.szjj2013-03)
文摘A modified nonlinear fatigue damage accumulation model based on the Manson-Halford theory was presented,and the new model was developed for fatigue life prediction under constant and variable amplitude loading, which took the effects of the load interactions and the phenomenon of material's strength degradation into account. The experimental data of the 30 Cr Mn Si A and the LY-12 cz from literature were used to verify the proposed model. And from the good agreement between the experimental data and predicted results,we can see it clear that the proposed method can be applied to predicting fatigue life under different loadings.
基金This study was co-supported by the National Natural Science Foundation of China(No.51301090).
文摘The nonlinear cumulative damage model is modified to have high prediction accuracy when the high-low cycle stress frequency ratio m is large(m500).The low cycle fatigue(LCF)tests,high cycle fatigue(HCF)tests and combined high and low cycle fatigue(CCF)tests of TC11 titanium alloy were carried out,and the influencing factors of CCF life were analysed.The CCF life declines with the decrease of the ratio of high-low cycle stress frequency m.Both linear and nonlinear cumulative damage models are used to predict the CCF life.The CCF life prediction error of the linear cumulative damage model is great and the predictions tend to be overestimated,which is dangerous for engineering application.The accuracy is relatively high when the high-low cycle stress frequency ratio m500.The accuracy of nonlinear cumulative damage model is higher than that of linear model when the high-low cycle stress frequency ratio m500.Based on the relationship between high cycle average stress rmajor and material yield limit rp,0.2,a correction term is added to the nonlinear cumulative damage model and verified,which made the modified model more accurate when m500.
文摘In this study,an experimental analysis for determining the fatigue strength of HDPE-100 under cyclic loading is presented.The curve of cumulative fatigue damage versus number of cycles(D-N)was deduced from stiffness degradation.Based on the three stage damage trend,the remaining fatigue life is numerically predicted by considering a double term power damage accumulation model.This model is found to be accurate,both in modeling the rapid damage growth in the early life and near the end of the fatigue life.Numerical results illustrate that the proposed model is capable of accurately fitting several different sets of experimental data.
基金supported by the National Natural Science Foundation of China(Nos.51875406 and 51805365)Natural Science Foundation of Tianjin,China(No.19JCQNJC04000)。
文摘Precision and low damage grinding of aviation optical elements can effectively improve the overall processing efficiency.The mechanism of high-speed cross scuffing of multiple abrasive particles has become an important factor affecting the forming quality of workpiece.Interaction of abrasive trajectory determines machined surface and subsurface morphology and damage.According to the relative motion trajectory of wear particles on the workpiece surface,a theoretical model of the trochoidal trajectory intersection angle is proposed.High-speed scratches with different cross angles are experimentally obtained to explore the interference mechanism and damage accumulation of cross scratches.The results indicate that the Crack system I and Crack system II,produced by the two cross scratches,are mainly based on the stress principle and the strength principle,respectively.An increase in the damage radius is observed with a decrease in the crossing angle.Furthermore,as the duration of the normal cutting force decomposition curve at the entrance/exit of the intersection increases,the half-peak width also increases.The accumulation of cross-scratch damage promotes the propagation of deep subsurface lateral and median cracks.In other words,damage accumulation and interference mechanism formed by the cross scratches increase the longitudinal depth and lateral length of the damage.
基金the National Natural Science Foundation of China(No.11272082)
文摘When a nonlinear fatigue damage accumulation model based on damage curve approach is used to get better residual life prediction results, it is necessary to solve the problem caused by the uncertain exponent of the model. Considering the effects of load interaction, the assumption that there is a linear dependence between the exponent ratio and the loading ratio is established to predict fatigue residual life of materials. Three experimental data sets are used to validate the rightness of the proposition. The comparisons of experimental data and predictions show that the predictions based on the proposed proposition are in good accordance with the experimental results as long as the parameters that represent the linear correlativity are set an appropriate value. Meanwhile, the accuracy of the proposition is approximated to that of an existing model. Therefore, the proposition proposed in this paper is reasonable for residual life prediction.
基金supported by the 863 Program(2014AA01A701)NSFC(61271187)+1 种基金the PAPD fundthe CICAEET fund
文摘The accuracy of the traditional assessment method of the quality of experience(Qo E) has been facing challenges with the growth of high-definition(HD) video streaming services.Image display-quality damage is the main factor that affects the Qo E in HD video services through UDP network transmission.In this paper,we introduce a novel objective factor known as image damage accumulation(IDA) to assess user's Qo E in HD video services.First,this paper quantitatively analyzed the effect on user quality of experience by IDA and established a mapping relationship between mean opinion scores and IDA.Furthermore,the probability of image damage caused by compression and transmission were analyzed.Based on this analysis,an objective Qo E assessment and prediction method for HD video stream service that evaluated the user experience according to IDA are proposed.The proposed method can achieve assessment and prediction accuracy on three distinct subjective tests.
基金funded by the National Natural Science Foundation of China(No.51508368)State High-tech Development Plan of China("863"Program)(No.2012AA03A204)+1 种基金Science and Technology Plan Projects of Jiangsu Provincial Construction Department(No.2015ZD78)Open Project of Structure Engineering Key Laboratory in Jiangsu Province(No.ZD1401)
文摘The fatigue damage mechanism and life prediction on foreign carbon-fiber-reinforced pol-ymer(CFRP)reinforced bridge under high temperature in an asphalt pavement were investiga-ted.First,the subtropical hot and humid construction environment in Bangladesh was introduced under which asphalt mastic bridge deck paving of Bangabandhu Bridge was carried on.Then the strains on a steel bar,concert and CFRP plate were adopted as parameters to investigate the fa-tigue crack evolution,load deflection curve variation characteristic and the CFRP plate stress of reinforced roof girder of the box girder.The girder crack resistance,stiffness and fatigue damage cumulative were analyzed.Finally,according to the laws of the fatigue crack propagation and the failure mode,the corresponding fracture mechanics analysis model was adopted combined with the experimented results,and the crack tip stress intensity factor calculation formula was intro-duced to investigate main fatigue crack propagation of specimens.The results show that the cracking of concrete and the development of the crack are effectively constrained by the CFRP plate in an asphalt layer construction under high-temperature conditions,and the fatigue life of the test beam reinforced with CFRP plates is prolonged to some extent,and the test beam can meet 2 million times the fatigue loading limits after the asphalt pavement construction under high-temperature.The fatigue life is predicted by da/dN-△K curves and crack propagation rate,and the fatigue life calculated by this method is in well agreement with the practical one.
基金The authors gratefully acknowledge the financial support by the National Natural Sciece Foundation of China under grant No. 10302008the Science Foundation of Heilongjiang Province under project No. A0309.
文摘The fatigue damage accumulation of [±20°] laminated steel cord reinforced rubber composite under T-T loading was studied. Results indicate that the increase in the cyclic maximum strain exhibits three-stage tendency in the process of fatigue. The macroscopic fatigue damage initiates from the ends of steel cords in the form of cylindrical crack. Damage propagates along with the increase in crack numbers, the cord/matrix interface debonding and the growth of interply cracks. By using the dynamic creep as parameter, a linear fatigue damage accumulation model was established. This model can be used under dual loading conditions to estimate the residual fatigue life of the specimen.
基金the Natural Science Foundation of China(No.52175188)the Key Research and Development Program of Shaanxi Province(No.2023-YBGY-434)+2 种基金the Open Fund of Liaoning Provincial Key Laboratory of Aero-engine Materials Tribology(No.LKLAMTF202101)the State Key Laboratory for Mechanical Behavior of Materials(No.20222412)the Fundamental Research Funds for the Central Universities.
文摘Alternating shear stress is a critical factor in the accumulation of damage during rolling contact fatigue,severely limiting the service life of bearings.However,the specific mechanisms responsible for the cyclic shear fatigue damage in bearing steel have not been fully understood.Here the mechanical response and microstructural evolution of a model GGr15 bearing steel under cyclic shear loading are investigated through the implementation of molecular dynamics simulations.The samples undergo 30 cycles under three different loading conditions with strains of 6.2%,9.2%,and 12.2%,respectively.The findings indicate that severe cyclic shear deformation results in early cyclic softening and significant accumulation of plastic damage in the bearing steel.Besides,samples subjected to higher strain-controlled loading exhibit higher plastic strain energy and shorter fatigue life.Additionally,strain localization is identified as the predominant damage mechanism in cyclic shear fatigue of the bearing steel,which accumulates and ultimately results in fatigue failure.Furthermore,simulation results also revealed the microstructural reasons for the strain localization(e.g.,BCC phase transformation into FCC and HCP phase),which well explained the formation of white etching areas.This study provides fresh atomic-scale insights into the mechanisms of cyclic shear fatigue damage in bearing steels.
基金SupportedbytheNationalNaturalScienceFoundationofChina (No .5 9935 10 0 )
文摘Experime ntal research results of surface damage accumulation in rail steel under rolling with slippage are presented. Hertz contact for two rollers made of rail and whe el steels was realized in the test. The influence of loading regime upon wear of rail is considered. The estimation of characteristics of surface fracture resis tance for rail steel is made. The method to predict the life of rail steel under given conditions of regular loading is proposed.
基金financially supported by the National Natural Science Foundation of China(Grant No.52071337)the Research Initiation Funds of Zhejiang University of Science and Technology(Grant No.F701102N06)+2 种基金the High-tech Ship Research Projects Sponsored by MIIT(Grant No.CBG2N21-4-2-5)the National Key Research and Development Program of China(Grant No.2022YFC2806300)the Marine Economy Development(Six Marine Industries)Special Foundation of the Department of Natural Resources of Guangdong Province(Grant No.GDNRC[2023]50).
文摘The deepwater subsea wellhead(SW)system is the foundation for the construction of oil and gas wells and the crucial channel for operation.During riser connection operation,the SW system is subjected to cyclic dynamic loads which cause fatigue damage to the SW system,and continuously accumulated fatigue damage leads to fatigue failure of the SW system,rupture,and even blowout accidents.This paper proposes a hybrid Bayesian network(HBN)-based dynamic reliability assessment approach for deepwater SW systems during their service life.In the proposed approach,the relationship between the accumulation of fatigue damage and the fatigue failure probability of the SW system is predicted,only considering normal conditions.The HBN model,which includes the accumulation of fatigue damage under normal conditions and the other factors affecting the fatigue of the SW system,is subsequently developed.When predictive and diagnostic analysis techniques are adopted,the dynamic reliability of the SW system is achieved,and the most influential factors are determined.Finally,corresponding safety control measures are proposed to improve the reliability of the SW system effectively.The results illustrate that the fatigue failure speed increases rapidly when the accumulation fatigue damage is larger than 0.45 under normal conditions and that the reliability of the SW system is larger than 94%within the design life.
基金financially supported by the National Natural Science Foundation of China(Nos.52306183,12272245,11832007,12172238)the Natural Science Foundation of Zhejiang Province,China(No.LQ23E050022)+1 种基金the Natural Science Foundation of Sichuan Province,China(Nos.2022NSFSC0324,2022JDJQ0011)the Open Project of Failure Mechanics and Engineering Disaster Prevention,Key Laboratory of Sichuan Province,China(No.FMEDP202305)。
文摘In order to accurately evaluate the creep-fatigue lifetime of GH720Li superalloy,a lifetime prediction model was established,reflecting the interaction between creep damage and low-cycle fatigue damage.The creep-fatigue lifetime prediction results of GH720Li superalloy with an average grain size of 17.3μm were essentially within a scatter band of 2 times,indicating a strong agreement between the predicted lifetimes and experimental data.Then,considering that the grain size of the dual-property turbine disc decreases from the rim to the center,a grain-size-sensitive lifetime prediction model for creep-fatigue was established by introducing the ratio of grain boundary area.The improved model overcame the limitation of most traditional prediction methods,which failed to reflect the relationship between grain size and creep-fatigue lifetime.
基金funding by National Natural Science Foundation of China(No.52105137)the National Science and Technology Major Project,China(No.2017-IV0012-0049)the Beijing Natural Science Foundation,China(No.3244033)。
文摘A Combined Cycle Fatigue(CCF)life prediction model considering the effect of load sequence was proposed.To account for the interaction of high and low cycle fatigue,the CCF load was divided into two different loading paths of variable stress amplitude and stress ratio.Based on the iso-damage curves,a CCF life prediction model independent of fitting parameters was proposed,agreeing well with the experimental results.Finally,the effect of load sequence on CCF was discussed according to the fracture morphology of designed blade-like specimen.The results showed that the predicted CCF life was almost located in three-fold dispersion band for the LCF-HCF(LH)and HCF-LCF(HL)loading paths,especially for the average results of both.Compared with other models,the proposed model had better predictive and generalization abilities for multiple materials and variable experimental conditions.
基金Project(50878141) supported by the National Natural Science Foundation of ChinaProject(Z2010250) supported by the Natural Science Foundation of Education Department of Hebei Province,China
文摘A 1/3-scale reinfored concrete(RC) frame of unequal storey height with specially shaped columns was tested under low frequency cyclic loading.The damage characteristic,bearing capacity,deformation capacity and ductility were analyzed.The restoring force model of the frame was obtained based on the study of the hysteresis curve measured in experiment,and the stiffness degeneration characteristics of every storey of the frame were analyzed.Finally the accumulated damage was analyzed with the damage assessment model.It is shown that the seismic behavior of this frame of unequal storey height with specially shaped columns is generally good,but the bottom of first floor column is a weak part,which should be paid more attention in design,and the restoring force model derived from this experiment can be seen as a valuable guide for design and non-linear finite element analysis for this kind of structure.
基金the National Natural Science Foundation of China (No. 11072205)
文摘A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman-Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren （HRR） formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points： the deepest point and the surface point. The theoretical model is applied to semi-elliptic surface cracked A1 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.
文摘New development trends in electronic operating data logging systems enable classification, recording and storage of load spectrums of mechanical transmission components during usage. Based on this fact, the application of online reliability evaluation and reliability prediction procedures are presented. Different methods are considered to calculate reliability, depending on actual load spectrum and a Wohler curve. The prediction of a reliability trend is analyzed by the application of time series models. For this purpose, exponential smoothing model, regression model, and the ARIMA model are considered to evaluate data and predict an decreasing reliability trends during usage.
基金Supported by the National Natural Science Foundation of China(50975030)
文摘A novel method is presented to evaluate the complicated fatigue behavior of gears made of20Cr2Ni4 A.Fatigue tests are conducted in a high-frequency push-pull fatigue tester,and acoustic emission（AE）technique is used to acquire metal fatigue signals.After analyzing large number of AE frequency spectrum,we find that：the crack extension can be expressed as the energy of specific frequency band,which is abbreviated as F-energy.To further validate the fatigue behavior,some correlation analysis is applied between F-energy and some AE parameters.Experimental results show that there is significant correlation among the Fenergy,root mean square（RMS）,relative energy,and hits.The findings can be used to validate the effectiveness of the F-energy in predicting fatigue crack propagation and remaining life for parts in-service.F-energy,as a new AE parameter,is first put forward in the area of fatigue crack growth.
基金the National Natural Science Foundation of China(10802015)the Joint Fund of Natural Science Foundation of Liaoning Province(2015020119)+1 种基金the Liaoning Province Graduate Education and Teaching Reform Research Project(2017)the Liaoning Province Transformation and the Innovation and Entrepreneurship Education Project(2017).
文摘Purpose–In view of the difficulty in determining the key parameters d in the Corten-Dolan model,based on the introduction of small loads,damage degrees and stress states to the Corten-Dolan model and the existing improved model,the sequential effects of the adjacent two-stage load were further considered.Design/methodology/approach–Two improved Corten-Dolan models were established on the basis of modifying the parameter d by two different methods,namely,increasing stress ratio coefficient as well as considering the effects of loading sequence and damage degree as independent influencing factors respectively.According to the test data of the welded joints of common materials(standard 45 steel),alloy materials(standard 16Mn steel)and Q235B steel,the validity and feasibility of the above two improved models for fatigue life prediction were verified.Findings–Results show that,compared with the traditional Miner model and the existing Corten-Dolan improved model,the two improved models have higher prediction accuracy in the fatigue life prediction of welding materials whether under two-stage load or multi-stage load.Originality/value–Because the mathematical expressions of the models are relatively simple and need no multi-layer iterative calculation,it is convenient to predict the fatigue life of welded structure in practical engineering.
文摘The bow structure of FPSO moored by the single mooring system is rather complicated. There are many potential hot spots in connection parts of structures between the mooring support frame and the forecastle. Mooring forces, which are induced by wave excitation and transferred by the YOKE and the mooring support frame, may cause fatigue damage to the bow structure. Different from direct wave-in duced-forces, the mooring force consists of wave frequency force (WF) and 2nd dr aft low frequency force (LF) [3] , which are represented by two sets of short-term distribution respectively. Based on two sets of short-term distribution of moor ing forces obtained by the model test, the fatigue damage of the bow structure of FPSO is analyzed, with emphasis on two points. One is the procedure and position selection for fatigue check, and the other is the application of new formulae for the calculation of accumulative fatigue damage caused by two sets of short-term distribution of hot spot stress range. From the results distingui shed features of fatigue damage to the FPSO’s bow structure can be observed.
