When femtosecond laser pulses interfere with chirped femtosecond laser pulses in As2S3 fiber, a chirped fiber grating is formed. An analytical expression is given to describe the chirped grating, and its Bragg reflect...When femtosecond laser pulses interfere with chirped femtosecond laser pulses in As2S3 fiber, a chirped fiber grating is formed. An analytical expression is given to describe the chirped grating, and its Bragg reflectivity is calculated. Because of the high photosensitive effect of As2S3 material, the chirped fiber grating has a wide Bragg reflective spectrum and high reflectivity by choosing proper parameters. This indicates that the chirped fiber grating can be used as a stretcher in the femtosecond chirped pulse amplification (CPA) system.展开更多
By means of the nuclear parton distribution studied only with lepton deep-inelastic scattering experimental data, the J/ψ ＂normal nuclear absorption＂ and energy loss effects are studied in a GIauber formalism at HE...By means of the nuclear parton distribution studied only with lepton deep-inelastic scattering experimental data, the J/ψ ＂normal nuclear absorption＂ and energy loss effects are studied in a GIauber formalism at HERA and RHIC energies. Assuming that the absorption cross section σabs increases with the charmonium-nucleon center of mass energy, the results reveal a significant dependence of the aabs on rapidity g at RHIC energies. The initial-state energy loss effect, which is found important only at HERA energies, is also considered, and its influence should be eliminated when we studied the absorption effect at low collision energies. Finally, we also present the theoretical prediction for LHC.展开更多
In this paper, the J/ψ nuclear absorption effect is studied at RHIC and LHC energies with the EKS98 shadowing parameterizations. By assuming that the J/ψ absorption cross section, σ abs , increases with the charmon...In this paper, the J/ψ nuclear absorption effect is studied at RHIC and LHC energies with the EKS98 shadowing parameterizations. By assuming that the J/ψ absorption cross section, σ abs , increases with the charmonium-nucleon （J/ψ-N） center of mass energy, s J/ψN , it is found that σ abs should depend on x F （or y） at a certain center of mass energy per nucleon pair,s , especially at LHC energies. The theoretical results with the x F （or y）-dependence of the absorption effect are in good agreement with the experiment data from PHENIX in d-Au collisions and the predicted results will be examined by the forthcoming experimental data from LHC in d-Pb collisions. Finally, we also present baseline calculations of cold nuclear matter effects on J/ψ production in nucleus-nucleus （A-A） collisions and find that the x F （or y）-dependence of absorption effect is very small at both RHIC and LHC energies in A-A collisions.展开更多
Surface plasmon resonance of noble metal nanoparticles leads to the optical absorption enhancement effects,which have great potential applications in solar cell.By using the general numerical method of discrete dipole...Surface plasmon resonance of noble metal nanoparticles leads to the optical absorption enhancement effects,which have great potential applications in solar cell.By using the general numerical method of discrete dipole approximation （DDA）,we study the absorption and scattering properties of two-dimensional square silver nanodisks （2D SSN） arrays on the single crystal silicon solar cell.Based on the effective reflective index model of the single crystal silicon solar cell,we investigate the optical enhancement absorption of light energy by varying the light incident direction,particle size,aspect ratio,and interparticle spacing of the silver nanodisks.The peak values and position of the optical extinction spectra of the 2D square arrays of noble metal nanodisks are obtained with the different array structures.展开更多
Using the fully propagated time-dependent Hartree–Fock method, we identify that both the dynamic core polarization and multiorbital contributions are important in the attosecond transient absorption of CO molecules.T...Using the fully propagated time-dependent Hartree–Fock method, we identify that both the dynamic core polarization and multiorbital contributions are important in the attosecond transient absorption of CO molecules.The dynamics of core electrons effectively modifies the behaviors of electrons in the highest occupied molecular orbital, resulting in the modulation of intensity and position of the absorption peaks. Depending on the alignment angles, different inner orbitals are identified to contribute, and even dominate the total absorption spectra. As a result, multi-electron fingerprints are encoded in the absorption spectra, which shed light on future applications of attosecond transient absorption in complex systems.展开更多
Blood lead levels of 180 pupils from two elementary schools were determined and the intellec- tual development of the children was followed.The children in these two groups were similar in most nonlead variables.Resul...Blood lead levels of 180 pupils from two elementary schools were determined and the intellec- tual development of the children was followed.The children in these two groups were similar in most nonlead variables.Results showed that pupils at the school near a battery plant had higher blood lead levels than those at a school in a residential neighborhood.An evident dose- effect relationship between blood lead level and children's performance on psychological testing existed:the higher the blood level,the lower the intelligence quotient.This relationship re- mained after confounding factors were controlled by stepwise regression analysis.Partial regres- sion coefficients for PbB and verbal IQ,performance IQ,and full-scale IQ were -0.85,-0.71, and -0.91,respectively.1989 Academic Press,Inc.展开更多
The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor ...The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor of 1.07 enhancement for an electrical field in a metal microcavity. The enhancement is considered to be the fact that strong exciton-photon coupling occurs in the microcavity due to ultrathin Ag. On the basis of the optical enhancement effect, optical behaviors are manipulated by varying the microcavity length. It is confirmed that ultrathin silver can serve as an ideal interconnection layer as the active layer is ～ 150nm thick and the thickness ratio between front and rear active layers lies between 1：1 and 1：2.展开更多
By using the expressions for the maximum absorption per wavelength (αλ),and the relaxation frequency fr of the boric acid relaxation derived previously by the author and employing the related oceanographic literatur...By using the expressions for the maximum absorption per wavelength (αλ),and the relaxation frequency fr of the boric acid relaxation derived previously by the author and employing the related oceanographic literatures, the effects of pressure, temperature, pH and salinity on (αλ)r and ∫r of the boric acid relaxation in sea water have been estimated. Results show that ( αλ), not only increases with pH but also increases approximately linearly with pressure and temperature, and is nearly proportional to the 1. 35 power of salinity. However, pressure, pH and salinity have negligible effect on ∫r; therefore, ∫r, can be approximately expressed as a function of temperature only. Comparisons of the predicted with the measured ( αλ)r and ∫r in different ocean areas are given.展开更多
Three sets of MXene(Ti_(3)C_(2)T_(x))@nano-Fe_(1)Co_(0.8)Ni_(1)composites with 15,45,and 90 mg MXene were prepared by in-situ liquid-phase deposition to effectively investigate the impact of the relationship between M...Three sets of MXene(Ti_(3)C_(2)T_(x))@nano-Fe_(1)Co_(0.8)Ni_(1)composites with 15,45,and 90 mg MXene were prepared by in-situ liquid-phase deposition to effectively investigate the impact of the relationship between MXene(Ti_(3)C_(2)T_(x))and nano-Fe_(1)Co_(0.8)Ni_(1)magnetic particles on the electromagnetic absorption properties of the composites.The microstructure,static magnetic properties,and electromag-netic absorption performance of these composites were studied.Results indicate that the MXene@nano-Fe_(1)Co_(0.8)Ni_(1)composites were primarily composed of face-centered cubic crystal structure particles and MXene,with spherical Fe_(1)Co_(0.8)Ni_(1)particles uniformly distrib-uted on the surface of the multilayered MXene.The alloy particles had an average particle size of approximately 100 nm and exhibited good dispersion without noticeable particle aggregation.With the increase in MXene content,the specific saturation magnetic and coer-civity of the composite initially decreased and then increased,displaying typical soft magnetic properties.Compared with those of the Fe_(1)Co_(0.8)Ni_(1)magnetic alloy particles alone,MXene addition caused an increasing trend in the real and imaginary parts of the dielectric constant of the composite.Meanwhile,the real and imaginary parts of the magnetic permeability exhibit decreasing trend.With the in-crease in MXene addition,the material attenuation constant increased and the impedance matching decreased.The minimum reflection loss increased,and the maximum effective absorption bandwidth decreased.When the MXene addition was 90 mg,the composite exhib-ited a minimum reflection loss of-46.9 dB with a sample thickness of 1.1 mm and a maximum effective absorption bandwidth of 3.60 GHz with a sample thickness of 1.0 mm.The effective absorption bandwidth of the composites and their corresponding thicknesses showed a decreasing trend with the increase in MXene addition,reducing by 50%from 1.5 mm without MXene addition to 1 mm with 90 mg of MXene addition.展开更多
Large-scale gas accumulation areas in large oil-gas basins in central and Western China have multiple special accumulation mechanisms and different accumulation effects.Based on the geological theory and method of nat...Large-scale gas accumulation areas in large oil-gas basins in central and Western China have multiple special accumulation mechanisms and different accumulation effects.Based on the geological theory and method of natural gas reservoir formation,this study examined the regional geological and structural background,formation burial evolution,basic characteristics of gas reservoirs,and fluid geology and geochemistry of typical petroliferous basins.The results show that the geological processes such as structural pumping,mudstone water absorption,water-soluble gas degasification and fluid sequestration caused by uplift and denudation since Himalayan stage all can form large-scale gas accumulation and different geological effects of gas accumulation.For example,the large-scale structural pumping effect and fluid sequestration effect are conducive to the occurrence of regional ultra-high pressure fluid and the formation of large-scale ultra-high pressure gas field;mudstone water absorption effect in the formation with low thickness ratio of sandstone to formation is conducive to the development of regional low-pressure and water free gas reservoir;the water-soluble gas degasification effect in large-scale thick sandstone can not only form large-scale natural gas accumulation;moreover,the degasification of water-soluble gas produced by the lateral migration of formation water will produce regional and regular isotopic fractionation effect of natural gas,that is,the farther the migration distance of water-soluble gas is,the heavier the carbon isotopic composition of methane formed by the accumulation.展开更多
The development of microwave absorption materials(MAMs) is a considerable important topic because our living space is crowed with electromagnetic wave which threatens human’s health.And MAMs are also used in radar st...The development of microwave absorption materials(MAMs) is a considerable important topic because our living space is crowed with electromagnetic wave which threatens human’s health.And MAMs are also used in radar stealth for protecting the weapons from being detected.Many nanomaterials were studied as MAMs,but not all of them have the satisfactory performance.Recently,metal-organic frameworks(MOFs) have attracted tremendous attention owing to their tunable chemical structures,diverse properties,large specific surface area and uniform pore distribution.MOF can transform to porous carbon(PC) which is decorated with metal species at appropriate pyrolysis temperature.However,the loss mechanism of pure MOF-derived PC is often relatively simple.In order to further improve the MA performance,the MOFs coupled with other loss materials are a widely studied method.In this review,we summarize the theories of MA,the progress of different MOF-derived PC-based MAMs,tunable chemical structures incorporated with dielectric loss or magnetic loss materials.The different MA performance and mechanisms are discussed in detail.Finally,the shortcomings,challenges and perspectives of MOF-derived PC-based MAMs are also presented.We hope this review could provide a new insight to design and fabricate MOF-derived PC-based MAMs with better fundamental understanding and practical application.展开更多
To solve the electromagnetic pollution,herein,a CoFe_(2)O_(4)/C/PANI composite was developed by a green route,which was constructed with spinel of metal oxide,graphitized carbon and conductive polymer composites.Benef...To solve the electromagnetic pollution,herein,a CoFe_(2)O_(4)/C/PANI composite was developed by a green route,which was constructed with spinel of metal oxide,graphitized carbon and conductive polymer composites.Benefiting from the designable interfaces and increased dipoles,the microwave dielectric response capability can be boosted significantly and resulted in the enhanced microwave absorbing performance.As revealed by the reflection loss curve,the minimum reflection loss(RLmin)reached-51.81 dB at 12.4 GHz under a matched thickness of 2.57 mm.At 2.5 mm,the effective absorbing band covered 8.88 GHz,suggesting the desirable wideband feature.In our case,the method of utilization of a novel green way to fabricate multiple-component EM absorber can be a promising candidate for high-performance EM absorber.展开更多
Traditional ferrites are of poor electromagnetic wave(EMW) absorption while doping rare earth elements(REEs) can greatly enhance their permeability to improve the EMW loss performance.In this study,Co-Zn ferrite nanop...Traditional ferrites are of poor electromagnetic wave(EMW) absorption while doping rare earth elements(REEs) can greatly enhance their permeability to improve the EMW loss performance.In this study,Co-Zn ferrite nanoparticles doped with various amounts of REEs(Gd^(3+),Nd^(3+)and Pr^(3+)) were synthesized by a hydrothermal method,and their particle morphology and an EMW absorption performance were characterized by using transmission electron microscopy(TEM) and a Vector network analyzer(VNA).The results show that the initial spherical Co-Zn ferrite nanoparticles present an irregular quadrilateral structure after Gd^(3+)doping,and the average particle size of Co_(0.5)Zn_(0.5-x)Gd_(x)Fe_(2) O_(4) increases from 26 to 50 nm with x increasing from 0 to 0.35.At x of 0.25,the reflectivity absorbance achieves-27.94 dB at 18 GHz with the effective absorption bandwidth(EAB) of 4.08 GHz at a sample thickness of 2.5 mm.When Nd^(3+)doping amount reaches x=0.3,the minimum reflection loss(RL)is-25.63 dB at 18 GHz and EAB is 3.91 GHz.Doping Pr^(3+)(x=0.25) in the sample broadens EAB,and the minimum RL is-16.1 dB at 16.81 GHz and EAB is 7.31 GHz.This study shows that the magnetic moment produced by doping REES can form magnetic domains,which affects the incident EMW and improves the magnetic loss.It is expected that REEs-doped Co-Zn ferrite nanoparticles can be used as efficient electromagnetic shielding materials in aerospace.展开更多
Cobalt nickel bimetallic oxides(NiCo_(2)O_(4))have received numerous attentions in terms of their controllable morphology,high temperature,corrosion resistance and strong electromagnetic wave(EMW)absorption capability...Cobalt nickel bimetallic oxides(NiCo_(2)O_(4))have received numerous attentions in terms of their controllable morphology,high temperature,corrosion resistance and strong electromagnetic wave(EMW)absorption capability.However,broadening the absorption bandwidth is still a huge challenge for NiCo_(2)O_(4)-based absorbers.Herein,the unique NiCo_(2)O_(4)@C core-shell microcubes with hollow structures were fabricated via a facile sacrificial template strategy.The concentration of oxygen vacancies and morphologies of the three-dimensional(3D)cubic hollow core-shell NiCo_(2)O_(4)@C framework were effectively optimized by adjusting the calcination temperature.The specially designed 3D framework structure facilitated the multiple reflections of incident electromagnetic waves and provided rich interfaces between multiple components,generating significant interfacial polarization losses.Dipole polarizations induced by oxygen vacancies could further enhance the attenuation ability for the incident EM waves.The optimized NiCo_(2)O_(4)@C hollow microcubes exhibit superior EMW absorption capability with minimum RL(RLmin)of-84.45 dB at 8.4 GHz for the thickness of 3.0 mm.Moreover,ultrabroad effective absorption bandwidth(EAB)as large as 12.48 GHz(5.52-18 GHz)is obtained.This work is believed to illuminate the path to synthesis of high-performance cobalt nickel bimetallic oxides for EMW absorbers with excellent EMW absorption capability,especially in broadening effective absorption bandwidth.展开更多
As metallic foams used for energy absorption in the automotive and aerospace industries, recently invented lotus-type porous metals are viewed as potential energy absorbers. Yet, solid conclusion on their eligibility ...As metallic foams used for energy absorption in the automotive and aerospace industries, recently invented lotus-type porous metals are viewed as potential energy absorbers. Yet, solid conclusion on their eligibility as energy absorbers is still in question, particularly when compression is in the direction perpendicular to the axial orientation of cylindrical pores. In this work, the energy absorption of lotus-type porous coppers in the perpendicular direction is investigated at strain rates from 0.001 s^（-1） to^2400 s^（-1）. The energy absorption capacity and the energy absorption efficiency are calculated to be4–16 k J/kg and 0.32–0.7, respectively, slightly inferior to metal foams and the same porous solid compressed in the parallel direction due to the shortened extent of the plateau stress region. The deformation mechanism is examined experimentally in conjunction with finite element modeling. Both suggest that gradual squeeze and collapse of pores are the mechanisms accommodating the energy absorption. The deformation is generally evenly distributed over pore ligaments and independent of strain rate.展开更多
The easy-plane anisotropy of the Y_(2)Co_(17)rare earth soft magnetic alloy has high saturation magnetization and operating frequency,and good impedance matching.Therefore,it is expected to become a kind of high-perfo...The easy-plane anisotropy of the Y_(2)Co_(17)rare earth soft magnetic alloy has high saturation magnetization and operating frequency,and good impedance matching.Therefore,it is expected to become a kind of high-performance microwave absorbing material.In this paper,Y_(2)Co_(17)alloy was prepared by a reduction-diffusion method,and its micropowder was prepared as polyurethane(PU)based composite absorbing materials(Y_(2)Co_(17)/PU composites).The microwave properties of composites with different volume fractions were calculated.The composites showed outstanding absorption characteristics in the range of 20-30 vol%,and the minimum reflection loss(RL)was less than-50 d B.When the volume fraction was25%,the effective absorption bandwidth could cover the X-band at a thickness of 1.5 mm,and the Ku-band at a thickness of1.08 mm.The absorption mechanism was analyzed by the interface reflection model.The RL absorption peak bandwidth mechanism was discussed by using the amplitude relation and calculating the effective absorption bandwidth at different thicknesses.The effective absorption bandwidth values were in good agreement with the theoretical expectation.展开更多
During data center operation,it generates a significant volume of low-grade waste heat.To recover waste heat,a coupled system including solar collector,double effect absorption refrigeration and organic Rankine cycle ...During data center operation,it generates a significant volume of low-grade waste heat.To recover waste heat,a coupled system including solar collector,double effect absorption refrigeration and organic Rankine cycle is proposed.The system performance is analyzed in detail.For the organic Rankine cycle,five organic working fluids(R245fa,R245ca,R123,R11,and R113)are selected.R245fa,R113 and R245ca obtain the maximum net power output,thermal efficiency and exergy efficiency,respectively.In the double effect absorption refrigeration system,the evaporation temperature,condensation temperature,and generation pressure affect the COP and exergy efficiency.When the generator pressure is unchanged,the COP increases with increasing evaporation temperature and decreasing condensation temperature.When the COP reaches 1.3,the COP slightly decreases as the evaporation temperature or condensation temperature changes.Similarly,the exergy efficiency of refrigeration systems exhibits the same trend as the COP,and the exergy efficiency maximum value appears at approximately 0.32.A new performance indicator,rPUE,was defined to evaluate the data center power utilization efficiency.The flow distribution ratio and heat source temperature were optimized with multi-objective optimization.When the mass flow distribution rate is 0.6 and the heat source temperature is 441.5 K,rPUE and the total unit production costs of the system obtain the optimal solution.展开更多
Using a strong nonlinear saturation absorption effect is one technique for breaking through the diffraction limit. In this technique, formation of a dynamic and reversible optical pinhole channel and transient superre...Using a strong nonlinear saturation absorption effect is one technique for breaking through the diffraction limit. In this technique, formation of a dynamic and reversible optical pinhole channel and transient superresolution is critical. In this work, a pump–probe transient detection and observation–experimental setup is constructed to explore the formation process directly. A Ge2Sb2Te5 thin film with strong nonlinear saturation absorption is investigated. The dynamic evolution of the optical pinhole channel is detected and imaged, and the transient superresolution spot is directly captured experimentally. Results verify that the superresolution effect originates from the generation of an optical pinhole channel and that the formation of the optical pinhole channel is dynamic and reversible. A good method is provided for direct detection and observation of the transient process of the superresolution effect of nonlinear thin films.展开更多
Commercial building sector accounts for 8% of the total electricity consumption in India. Cooling activities (HVAC) in commercial buildings consume 55% of the total energy utilized. Consequently, CO<sub>2</su...Commercial building sector accounts for 8% of the total electricity consumption in India. Cooling activities (HVAC) in commercial buildings consume 55% of the total energy utilized. Consequently, CO<sub>2</sub> emissions from conventional buildings in India were estimated to be 98 metric tonnes of CO<sub>2</sub> per million ft<sup>2</sup> in 2014. Solar thermal air conditioning can be the solution to these demands and can contribute to about 15% to 20% of India’s total oil consumption thereby reducing the dependence on fossil fuels. Hence, the main objective of the work is to model and simulate a solar absorption cooling system for GERMI office building located in Gandhinagar, Gujarat, India, using the transient simulation software ‘TRNSYS’. Cooling load estimation and comfort conditions required for the building were determined based on ASHRAE standards. Evacuated tube collectors were selected because of its market availability, ease of manufacturing and proven technology. Single effect absorption chiller was used because of its commercial availability. The effects of storage tank volume, collector area and collector slope were also investigated for parametric optimization. The results of the simulation and parametric analysis are analyzed and presented in the paper.展开更多
Hollow engineering is considered to be an essential subfield in promoting electromagnetic(EM)wave absorption intensity and realizing lightweight characteristics.However,the enhancement of the effective absorption band...Hollow engineering is considered to be an essential subfield in promoting electromagnetic(EM)wave absorption intensity and realizing lightweight characteristics.However,the enhancement of the effective absorption bandwidth(EAB)still faces considerable challenges.Herein,hollow carbon nanocages with CoFe_(2)Se_(4)quantum dots(HCNs@CoFe_(2)Se_(4)-QDs)with superior EM wave absorption intensity and ultra broadband EAB are produced by using tightly arranged SiO_(2)spheres as hard-template materials.Specifically,the removal of SiO_(2)templates inevitably results in the formation of a hollow cavity,which is favorable for optimizing impedance matching and increasing the absorption intensity.In addition,the incorporation of selenium powder effectively increases the number of heterogeneous interfaces by forming CoFe_(2)Se_(4)quantum dots(QDs)during the pyrolysis process,leading to strengthened interfacial polarization and ultra broadband EAB.As a result,superior EM wave attenuation with a minimum reflection loss(RL)of−67.6 dB and an EAB of 11.4 GHz is achieved with only a 20 wt%filler ratio.This design concept of hollow engineering with magnetic QDs provides inspiration for optimizing the EM wave absorption intensity and simultaneously promoting the absorption bandwidth.展开更多
基金The authors acknowledge the support of the National Key Basic Research Special Foundation of China (No. G1999075201-2)the National Natural Science Foundation of China (No. 60178007)the Science Foundation of China for Post Ph. D (2002032163).
文摘When femtosecond laser pulses interfere with chirped femtosecond laser pulses in As2S3 fiber, a chirped fiber grating is formed. An analytical expression is given to describe the chirped grating, and its Bragg reflectivity is calculated. Because of the high photosensitive effect of As2S3 material, the chirped fiber grating has a wide Bragg reflective spectrum and high reflectivity by choosing proper parameters. This indicates that the chirped fiber grating can be used as a stretcher in the femtosecond chirped pulse amplification (CPA) system.
文摘By means of the nuclear parton distribution studied only with lepton deep-inelastic scattering experimental data, the J/ψ ＂normal nuclear absorption＂ and energy loss effects are studied in a GIauber formalism at HERA and RHIC energies. Assuming that the absorption cross section σabs increases with the charmonium-nucleon center of mass energy, the results reveal a significant dependence of the aabs on rapidity g at RHIC energies. The initial-state energy loss effect, which is found important only at HERA energies, is also considered, and its influence should be eliminated when we studied the absorption effect at low collision energies. Finally, we also present the theoretical prediction for LHC.
基金Supported by Natural Science Foundation of Hebei Province (A2008000421)
文摘In this paper, the J/ψ nuclear absorption effect is studied at RHIC and LHC energies with the EKS98 shadowing parameterizations. By assuming that the J/ψ absorption cross section, σ abs , increases with the charmonium-nucleon （J/ψ-N） center of mass energy, s J/ψN , it is found that σ abs should depend on x F （or y） at a certain center of mass energy per nucleon pair,s , especially at LHC energies. The theoretical results with the x F （or y）-dependence of the absorption effect are in good agreement with the experiment data from PHENIX in d-Au collisions and the predicted results will be examined by the forthcoming experimental data from LHC in d-Pb collisions. Finally, we also present baseline calculations of cold nuclear matter effects on J/ψ production in nucleus-nucleus （A-A） collisions and find that the x F （or y）-dependence of absorption effect is very small at both RHIC and LHC energies in A-A collisions.
基金supported by the National Natural Science Foundation of China under Grant No. G050104011004024the Specialized Research Fund for the Doctoral Program of Higher Education of China under Grant No. A0901040110018512026
文摘Surface plasmon resonance of noble metal nanoparticles leads to the optical absorption enhancement effects,which have great potential applications in solar cell.By using the general numerical method of discrete dipole approximation （DDA）,we study the absorption and scattering properties of two-dimensional square silver nanodisks （2D SSN） arrays on the single crystal silicon solar cell.Based on the effective reflective index model of the single crystal silicon solar cell,we investigate the optical enhancement absorption of light energy by varying the light incident direction,particle size,aspect ratio,and interparticle spacing of the silver nanodisks.The peak values and position of the optical extinction spectra of the 2D square arrays of noble metal nanodisks are obtained with the different array structures.
基金Supported by the National Basic Research Program of China under Grant No 2013CB922203the National Natural Science Foundation of China under Grant No 11374366+1 种基金the Innovation Foundation of National University of Defense Technology under Grant No B110204the Hunan Provincial Innovation Foundation for Postgraduate under Grant No CX2011B010
文摘Using the fully propagated time-dependent Hartree–Fock method, we identify that both the dynamic core polarization and multiorbital contributions are important in the attosecond transient absorption of CO molecules.The dynamics of core electrons effectively modifies the behaviors of electrons in the highest occupied molecular orbital, resulting in the modulation of intensity and position of the absorption peaks. Depending on the alignment angles, different inner orbitals are identified to contribute, and even dominate the total absorption spectra. As a result, multi-electron fingerprints are encoded in the absorption spectra, which shed light on future applications of attosecond transient absorption in complex systems.
文摘Blood lead levels of 180 pupils from two elementary schools were determined and the intellec- tual development of the children was followed.The children in these two groups were similar in most nonlead variables.Results showed that pupils at the school near a battery plant had higher blood lead levels than those at a school in a residential neighborhood.An evident dose- effect relationship between blood lead level and children's performance on psychological testing existed:the higher the blood level,the lower the intelligence quotient.This relationship re- mained after confounding factors were controlled by stepwise regression analysis.Partial regres- sion coefficients for PbB and verbal IQ,performance IQ,and full-scale IQ were -0.85,-0.71, and -0.91,respectively.1989 Academic Press,Inc.
基金Supported by the National Natural Science Foundation of China under Grant No 61565015the Western Light Talent Training Program of Chinese Academy of Sciences
文摘The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor of 1.07 enhancement for an electrical field in a metal microcavity. The enhancement is considered to be the fact that strong exciton-photon coupling occurs in the microcavity due to ultrathin Ag. On the basis of the optical enhancement effect, optical behaviors are manipulated by varying the microcavity length. It is confirmed that ultrathin silver can serve as an ideal interconnection layer as the active layer is ～ 150nm thick and the thickness ratio between front and rear active layers lies between 1：1 and 1：2.
基金This work is supported by National Natural Science Foundation of China
文摘By using the expressions for the maximum absorption per wavelength (αλ),and the relaxation frequency fr of the boric acid relaxation derived previously by the author and employing the related oceanographic literatures, the effects of pressure, temperature, pH and salinity on (αλ)r and ∫r of the boric acid relaxation in sea water have been estimated. Results show that ( αλ), not only increases with pH but also increases approximately linearly with pressure and temperature, and is nearly proportional to the 1. 35 power of salinity. However, pressure, pH and salinity have negligible effect on ∫r; therefore, ∫r, can be approximately expressed as a function of temperature only. Comparisons of the predicted with the measured ( αλ)r and ∫r in different ocean areas are given.
文摘Three sets of MXene(Ti_(3)C_(2)T_(x))@nano-Fe_(1)Co_(0.8)Ni_(1)composites with 15,45,and 90 mg MXene were prepared by in-situ liquid-phase deposition to effectively investigate the impact of the relationship between MXene(Ti_(3)C_(2)T_(x))and nano-Fe_(1)Co_(0.8)Ni_(1)magnetic particles on the electromagnetic absorption properties of the composites.The microstructure,static magnetic properties,and electromag-netic absorption performance of these composites were studied.Results indicate that the MXene@nano-Fe_(1)Co_(0.8)Ni_(1)composites were primarily composed of face-centered cubic crystal structure particles and MXene,with spherical Fe_(1)Co_(0.8)Ni_(1)particles uniformly distrib-uted on the surface of the multilayered MXene.The alloy particles had an average particle size of approximately 100 nm and exhibited good dispersion without noticeable particle aggregation.With the increase in MXene content,the specific saturation magnetic and coer-civity of the composite initially decreased and then increased,displaying typical soft magnetic properties.Compared with those of the Fe_(1)Co_(0.8)Ni_(1)magnetic alloy particles alone,MXene addition caused an increasing trend in the real and imaginary parts of the dielectric constant of the composite.Meanwhile,the real and imaginary parts of the magnetic permeability exhibit decreasing trend.With the in-crease in MXene addition,the material attenuation constant increased and the impedance matching decreased.The minimum reflection loss increased,and the maximum effective absorption bandwidth decreased.When the MXene addition was 90 mg,the composite exhib-ited a minimum reflection loss of-46.9 dB with a sample thickness of 1.1 mm and a maximum effective absorption bandwidth of 3.60 GHz with a sample thickness of 1.0 mm.The effective absorption bandwidth of the composites and their corresponding thicknesses showed a decreasing trend with the increase in MXene addition,reducing by 50%from 1.5 mm without MXene addition to 1 mm with 90 mg of MXene addition.
基金Supported by the National Science and Technology Major Project(2016ZX05003-002)Scientific Research Project of Petro China Company Limited(2016E-0601)
文摘Large-scale gas accumulation areas in large oil-gas basins in central and Western China have multiple special accumulation mechanisms and different accumulation effects.Based on the geological theory and method of natural gas reservoir formation,this study examined the regional geological and structural background,formation burial evolution,basic characteristics of gas reservoirs,and fluid geology and geochemistry of typical petroliferous basins.The results show that the geological processes such as structural pumping,mudstone water absorption,water-soluble gas degasification and fluid sequestration caused by uplift and denudation since Himalayan stage all can form large-scale gas accumulation and different geological effects of gas accumulation.For example,the large-scale structural pumping effect and fluid sequestration effect are conducive to the occurrence of regional ultra-high pressure fluid and the formation of large-scale ultra-high pressure gas field;mudstone water absorption effect in the formation with low thickness ratio of sandstone to formation is conducive to the development of regional low-pressure and water free gas reservoir;the water-soluble gas degasification effect in large-scale thick sandstone can not only form large-scale natural gas accumulation;moreover,the degasification of water-soluble gas produced by the lateral migration of formation water will produce regional and regular isotopic fractionation effect of natural gas,that is,the farther the migration distance of water-soluble gas is,the heavier the carbon isotopic composition of methane formed by the accumulation.
基金financial support from Ministry of Science and Technology of China(MoST,2016YFA0200200)the National Natural Science Foundation of China(NSFC,21875114,51373078,and 51422304)NSF of Tianjin City(15JCYBJC17700)。
文摘The development of microwave absorption materials(MAMs) is a considerable important topic because our living space is crowed with electromagnetic wave which threatens human’s health.And MAMs are also used in radar stealth for protecting the weapons from being detected.Many nanomaterials were studied as MAMs,but not all of them have the satisfactory performance.Recently,metal-organic frameworks(MOFs) have attracted tremendous attention owing to their tunable chemical structures,diverse properties,large specific surface area and uniform pore distribution.MOF can transform to porous carbon(PC) which is decorated with metal species at appropriate pyrolysis temperature.However,the loss mechanism of pure MOF-derived PC is often relatively simple.In order to further improve the MA performance,the MOFs coupled with other loss materials are a widely studied method.In this review,we summarize the theories of MA,the progress of different MOF-derived PC-based MAMs,tunable chemical structures incorporated with dielectric loss or magnetic loss materials.The different MA performance and mechanisms are discussed in detail.Finally,the shortcomings,challenges and perspectives of MOF-derived PC-based MAMs are also presented.We hope this review could provide a new insight to design and fabricate MOF-derived PC-based MAMs with better fundamental understanding and practical application.
基金financially supported by the National Natural Science Foundation of China(Nos.51407134 and 51801001)the Natural Science Foundation of Shandong Province(No.ZR2019YQ24)+6 种基金the China Postdoctoral Science Foundation(Nos.2016M590619 and 2016M601878)the Provincial Key Research and Development Program of Shaanxi(No.2019GY-197)the Qingchuang Talents Induction Program of Shandong Higher Education Institution(Research and Innovation Team of Structural Functional Polymer Composites)support from The Thousand Talents PlanThe World-Class University and DisciplineThe Taishan Scholar’s Advantageous and Distinctive Discipline Program of Shandong ProvinceThe World-Class Discipline Program of Shandong Province。
文摘To solve the electromagnetic pollution,herein,a CoFe_(2)O_(4)/C/PANI composite was developed by a green route,which was constructed with spinel of metal oxide,graphitized carbon and conductive polymer composites.Benefiting from the designable interfaces and increased dipoles,the microwave dielectric response capability can be boosted significantly and resulted in the enhanced microwave absorbing performance.As revealed by the reflection loss curve,the minimum reflection loss(RLmin)reached-51.81 dB at 12.4 GHz under a matched thickness of 2.57 mm.At 2.5 mm,the effective absorbing band covered 8.88 GHz,suggesting the desirable wideband feature.In our case,the method of utilization of a novel green way to fabricate multiple-component EM absorber can be a promising candidate for high-performance EM absorber.
基金Project supported by the National Key Research and Development Program of China (2017YFB0304301)the National Natural Science Foundation of China (51804346)China Postdoctoral Science Foundation(2020T130730)。
文摘Traditional ferrites are of poor electromagnetic wave(EMW) absorption while doping rare earth elements(REEs) can greatly enhance their permeability to improve the EMW loss performance.In this study,Co-Zn ferrite nanoparticles doped with various amounts of REEs(Gd^(3+),Nd^(3+)and Pr^(3+)) were synthesized by a hydrothermal method,and their particle morphology and an EMW absorption performance were characterized by using transmission electron microscopy(TEM) and a Vector network analyzer(VNA).The results show that the initial spherical Co-Zn ferrite nanoparticles present an irregular quadrilateral structure after Gd^(3+)doping,and the average particle size of Co_(0.5)Zn_(0.5-x)Gd_(x)Fe_(2) O_(4) increases from 26 to 50 nm with x increasing from 0 to 0.35.At x of 0.25,the reflectivity absorbance achieves-27.94 dB at 18 GHz with the effective absorption bandwidth(EAB) of 4.08 GHz at a sample thickness of 2.5 mm.When Nd^(3+)doping amount reaches x=0.3,the minimum reflection loss(RL)is-25.63 dB at 18 GHz and EAB is 3.91 GHz.Doping Pr^(3+)(x=0.25) in the sample broadens EAB,and the minimum RL is-16.1 dB at 16.81 GHz and EAB is 7.31 GHz.This study shows that the magnetic moment produced by doping REES can form magnetic domains,which affects the incident EMW and improves the magnetic loss.It is expected that REEs-doped Co-Zn ferrite nanoparticles can be used as efficient electromagnetic shielding materials in aerospace.
基金This work was supported by Natural Science Foundation of Shandong Province(ZR2022ME089)National Natural Science Foundation of China(52207249)Yantai Basic Research Project(2022JCYJ04).
文摘Cobalt nickel bimetallic oxides(NiCo_(2)O_(4))have received numerous attentions in terms of their controllable morphology,high temperature,corrosion resistance and strong electromagnetic wave(EMW)absorption capability.However,broadening the absorption bandwidth is still a huge challenge for NiCo_(2)O_(4)-based absorbers.Herein,the unique NiCo_(2)O_(4)@C core-shell microcubes with hollow structures were fabricated via a facile sacrificial template strategy.The concentration of oxygen vacancies and morphologies of the three-dimensional(3D)cubic hollow core-shell NiCo_(2)O_(4)@C framework were effectively optimized by adjusting the calcination temperature.The specially designed 3D framework structure facilitated the multiple reflections of incident electromagnetic waves and provided rich interfaces between multiple components,generating significant interfacial polarization losses.Dipole polarizations induced by oxygen vacancies could further enhance the attenuation ability for the incident EM waves.The optimized NiCo_(2)O_(4)@C hollow microcubes exhibit superior EMW absorption capability with minimum RL(RLmin)of-84.45 dB at 8.4 GHz for the thickness of 3.0 mm.Moreover,ultrabroad effective absorption bandwidth(EAB)as large as 12.48 GHz(5.52-18 GHz)is obtained.This work is believed to illuminate the path to synthesis of high-performance cobalt nickel bimetallic oxides for EMW absorbers with excellent EMW absorption capability,especially in broadening effective absorption bandwidth.
基金financial support from the National Natural Science Foundation of China (Grant No. 50904004)
文摘As metallic foams used for energy absorption in the automotive and aerospace industries, recently invented lotus-type porous metals are viewed as potential energy absorbers. Yet, solid conclusion on their eligibility as energy absorbers is still in question, particularly when compression is in the direction perpendicular to the axial orientation of cylindrical pores. In this work, the energy absorption of lotus-type porous coppers in the perpendicular direction is investigated at strain rates from 0.001 s^（-1） to^2400 s^（-1）. The energy absorption capacity and the energy absorption efficiency are calculated to be4–16 k J/kg and 0.32–0.7, respectively, slightly inferior to metal foams and the same porous solid compressed in the parallel direction due to the shortened extent of the plateau stress region. The deformation mechanism is examined experimentally in conjunction with finite element modeling. Both suggest that gradual squeeze and collapse of pores are the mechanisms accommodating the energy absorption. The deformation is generally evenly distributed over pore ligaments and independent of strain rate.
基金Project supported by the National Key R&D Program of China(Grant No.2021YFB3501302)the National Natural Science Foundation of China(Grant No.51731001)supported by the State Key Laboratory of Baiyunobo Rare Earth Resource Researches and Comprehensive Utilization’s key of research and development projects。
文摘The easy-plane anisotropy of the Y_(2)Co_(17)rare earth soft magnetic alloy has high saturation magnetization and operating frequency,and good impedance matching.Therefore,it is expected to become a kind of high-performance microwave absorbing material.In this paper,Y_(2)Co_(17)alloy was prepared by a reduction-diffusion method,and its micropowder was prepared as polyurethane(PU)based composite absorbing materials(Y_(2)Co_(17)/PU composites).The microwave properties of composites with different volume fractions were calculated.The composites showed outstanding absorption characteristics in the range of 20-30 vol%,and the minimum reflection loss(RL)was less than-50 d B.When the volume fraction was25%,the effective absorption bandwidth could cover the X-band at a thickness of 1.5 mm,and the Ku-band at a thickness of1.08 mm.The absorption mechanism was analyzed by the interface reflection model.The RL absorption peak bandwidth mechanism was discussed by using the amplitude relation and calculating the effective absorption bandwidth at different thicknesses.The effective absorption bandwidth values were in good agreement with the theoretical expectation.
基金the support provided by the National Natural Science Foundation of China(No.52106010)the Beijing Natural Science Foundation(3232037)the Fundamental Research Funds for the Central Universities(No.2024MS150)。
文摘During data center operation,it generates a significant volume of low-grade waste heat.To recover waste heat,a coupled system including solar collector,double effect absorption refrigeration and organic Rankine cycle is proposed.The system performance is analyzed in detail.For the organic Rankine cycle,five organic working fluids(R245fa,R245ca,R123,R11,and R113)are selected.R245fa,R113 and R245ca obtain the maximum net power output,thermal efficiency and exergy efficiency,respectively.In the double effect absorption refrigeration system,the evaporation temperature,condensation temperature,and generation pressure affect the COP and exergy efficiency.When the generator pressure is unchanged,the COP increases with increasing evaporation temperature and decreasing condensation temperature.When the COP reaches 1.3,the COP slightly decreases as the evaporation temperature or condensation temperature changes.Similarly,the exergy efficiency of refrigeration systems exhibits the same trend as the COP,and the exergy efficiency maximum value appears at approximately 0.32.A new performance indicator,rPUE,was defined to evaluate the data center power utilization efficiency.The flow distribution ratio and heat source temperature were optimized with multi-objective optimization.When the mass flow distribution rate is 0.6 and the heat source temperature is 441.5 K,rPUE and the total unit production costs of the system obtain the optimal solution.
基金partially supported by National Natural Science Foundation of China (Nos. 51172253 and 61137002)
文摘Using a strong nonlinear saturation absorption effect is one technique for breaking through the diffraction limit. In this technique, formation of a dynamic and reversible optical pinhole channel and transient superresolution is critical. In this work, a pump–probe transient detection and observation–experimental setup is constructed to explore the formation process directly. A Ge2Sb2Te5 thin film with strong nonlinear saturation absorption is investigated. The dynamic evolution of the optical pinhole channel is detected and imaged, and the transient superresolution spot is directly captured experimentally. Results verify that the superresolution effect originates from the generation of an optical pinhole channel and that the formation of the optical pinhole channel is dynamic and reversible. A good method is provided for direct detection and observation of the transient process of the superresolution effect of nonlinear thin films.
文摘Commercial building sector accounts for 8% of the total electricity consumption in India. Cooling activities (HVAC) in commercial buildings consume 55% of the total energy utilized. Consequently, CO<sub>2</sub> emissions from conventional buildings in India were estimated to be 98 metric tonnes of CO<sub>2</sub> per million ft<sup>2</sup> in 2014. Solar thermal air conditioning can be the solution to these demands and can contribute to about 15% to 20% of India’s total oil consumption thereby reducing the dependence on fossil fuels. Hence, the main objective of the work is to model and simulate a solar absorption cooling system for GERMI office building located in Gandhinagar, Gujarat, India, using the transient simulation software ‘TRNSYS’. Cooling load estimation and comfort conditions required for the building were determined based on ASHRAE standards. Evacuated tube collectors were selected because of its market availability, ease of manufacturing and proven technology. Single effect absorption chiller was used because of its commercial availability. The effects of storage tank volume, collector area and collector slope were also investigated for parametric optimization. The results of the simulation and parametric analysis are analyzed and presented in the paper.
基金supported by the National Natural Science Foundation of China(No.52373271)the Open Foundation of the Key Laboratory of Multispectral Absorbing Materials and Structures,Ministry of Education(No.KPKFJJ20250011-2).
文摘Hollow engineering is considered to be an essential subfield in promoting electromagnetic(EM)wave absorption intensity and realizing lightweight characteristics.However,the enhancement of the effective absorption bandwidth(EAB)still faces considerable challenges.Herein,hollow carbon nanocages with CoFe_(2)Se_(4)quantum dots(HCNs@CoFe_(2)Se_(4)-QDs)with superior EM wave absorption intensity and ultra broadband EAB are produced by using tightly arranged SiO_(2)spheres as hard-template materials.Specifically,the removal of SiO_(2)templates inevitably results in the formation of a hollow cavity,which is favorable for optimizing impedance matching and increasing the absorption intensity.In addition,the incorporation of selenium powder effectively increases the number of heterogeneous interfaces by forming CoFe_(2)Se_(4)quantum dots(QDs)during the pyrolysis process,leading to strengthened interfacial polarization and ultra broadband EAB.As a result,superior EM wave attenuation with a minimum reflection loss(RL)of−67.6 dB and an EAB of 11.4 GHz is achieved with only a 20 wt%filler ratio.This design concept of hollow engineering with magnetic QDs provides inspiration for optimizing the EM wave absorption intensity and simultaneously promoting the absorption bandwidth.
