We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based im...We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based imaging with sub-micrometer spatial and femtosecond temporal resolution,supported by hydrodynamic and particle-in-cell simulations,we reveal how return current density depends precisely on wire diameter,material properties,and incident laser energy.We identify deviations from simple theoretical predictions due to geometrically influenced electron escape dynamics.These results refine and confirm the scaling laws essential for predictive modeling in high-energy-density physics and inertial fusion research.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
The effects of artificial aging(T6)on the creep resistance with tensile stresses in the range of 50−80 MPa at 175℃were investigated for an extruded Mg−1.22Al−0.31Ca−0.44Mn(wt.%)alloy.The Guinier-Preston(G.P.)zones pr...The effects of artificial aging(T6)on the creep resistance with tensile stresses in the range of 50−80 MPa at 175℃were investigated for an extruded Mg−1.22Al−0.31Ca−0.44Mn(wt.%)alloy.The Guinier-Preston(G.P.)zones primarily precipitate in the sample aged at 200℃for 1 h(T6-200℃/1h),while the Al_(2)Ca phases mainly precipitate in the sample aged at 275℃for 8 h(T6-275℃/8h).The T6-200℃/1h sample exhibits excellent creep resistance,with a steady-state creep rate one order of magnitude lower than that of the T6-275℃/8h sample.The abnormally high stress exponent(~8.2)observed in the T6-200℃/1h sample is associated with the power-law breakdown mechanism.TEM analysis illuminates that the creep mechanism for the T6-200℃/1h sample is cross-slip between basal and prismatic dislocations,while the T6-275℃/8h sample exhibits a mixed mechanism of dislocation cross-slip and climb.Compared with the Al_(2)Ca phase,the dense G.P.zones effectively impede dislocation climb and glide during the creep process,demonstrating superior creep resistance of the T6-200℃/1h sample.展开更多
The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstru...The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.展开更多
The dependence of shrinkage porosities on microstructure characteristics of Mg−12Al alloy was investigated.The distribution,morphology,size,and number density of shrinkage porosities were analyzed under different cool...The dependence of shrinkage porosities on microstructure characteristics of Mg−12Al alloy was investigated.The distribution,morphology,size,and number density of shrinkage porosities were analyzed under different cooling rates.The relationship between shrinkage porosities and microstructure characteristics was discussed in terms of temperature conditions,feeding channel characteristics,and feeding capacity.Further,the feeding behavior of the residual liquid phase in the solid skeleton was quantified by introducing permeability.Results show a strong correlation between the solid microstructure skeleton and shrinkage porosity characteristics.An increase in permeability corresponds to a declining number density of shrinkage porosities.This study aims to provide a more complete understanding how to reduce shrinkage porosities by controlling microstructure characteristics.展开更多
High-pressure electrides,characterized by the presence of interstitial quasi-atoms(ISQs),possess unique electronic structures and physical properties,such as diverse dimensions of electride states exhibiting different...High-pressure electrides,characterized by the presence of interstitial quasi-atoms(ISQs),possess unique electronic structures and physical properties,such as diverse dimensions of electride states exhibiting different superconductivity,which has attracted significant attention.Here,we report a new electron-deficient type of electride Li_(4)Al and identify its phase transition progress with pressurization,where the internal driving force behind phase transitions,bonding characteristics,and superconducting behaviors have been revealed based on first-principles density functional theory.Through analysis of the bonding properties of electride Li_(4)Al,we demonstrate that the ISQs exhibiting increasingly covalent characteristics between Al ions play a critical role in driving the phase transition.Our electron–phonon coupling calculations indicate that all phases exhibit superconducting behaviors.Importantly,we prove that the ISQs behave as free electrons and demonstrate that the factor governing T_(c) is primarily derived from Li-p-hybridized electronic states with ISQ compositions.These electronic states are scattered by low-frequency phonons arising from mixed vibrations of Li and Al affected by ISQs to enhance electron–phonon coupling.Our study largely expands the research scope of electrides,provides new insight for understanding phase transitions,and elucidates the effects of ISQs on superconducting behavior.展开更多
1.Introduction.The Ti6Al4V alloy is extensively utilized across various indus-trial sectors due to its favorable characteristics,such as lightweight design,high strength,and resistance to corrosion[1].In effort s to f...1.Introduction.The Ti6Al4V alloy is extensively utilized across various indus-trial sectors due to its favorable characteristics,such as lightweight design,high strength,and resistance to corrosion[1].In effort s to further reduce weight,functional elements like electric actuators can be substituted with intelligent materials like shape memory alloys(SMAs)[2,3].Among SMAs,NiTi alloy stands out for its sens-ing and actuation capabilities,significantly enhancing the safety and reliability of engineering structures[4,5].Integrating Ti6Al4V and NiTi alloys within a single component holds the potential to provide precise feedback on mechanical,thermal,or environmen-tal conditions[6,7].展开更多
基金partially supported by the Center for Advanced Systems Understanding(CASUS)financed by Germany’s Federal Ministry of Education and Research(BMBF)+2 种基金the Saxon State Government out of the State Budget approved by the Saxon State Parliamentfunding from the European Union’s Just Transition Fund(JTF)within the project Röntgenlaser-Optimierung der Laserfusion(ROLF),Contract No.5086999001co-financed by the Saxon State Government out of the State Budget approved by the Saxon State Parliament.
文摘We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based imaging with sub-micrometer spatial and femtosecond temporal resolution,supported by hydrodynamic and particle-in-cell simulations,we reveal how return current density depends precisely on wire diameter,material properties,and incident laser energy.We identify deviations from simple theoretical predictions due to geometrically influenced electron escape dynamics.These results refine and confirm the scaling laws essential for predictive modeling in high-energy-density physics and inertial fusion research.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
基金supported by the National Natural Science Foundation of China (Nos. 52175322, 52271031)the Natural Science Foundation of Jilin Province, China (No. SKL202302015)。
文摘The effects of artificial aging(T6)on the creep resistance with tensile stresses in the range of 50−80 MPa at 175℃were investigated for an extruded Mg−1.22Al−0.31Ca−0.44Mn(wt.%)alloy.The Guinier-Preston(G.P.)zones primarily precipitate in the sample aged at 200℃for 1 h(T6-200℃/1h),while the Al_(2)Ca phases mainly precipitate in the sample aged at 275℃for 8 h(T6-275℃/8h).The T6-200℃/1h sample exhibits excellent creep resistance,with a steady-state creep rate one order of magnitude lower than that of the T6-275℃/8h sample.The abnormally high stress exponent(~8.2)observed in the T6-200℃/1h sample is associated with the power-law breakdown mechanism.TEM analysis illuminates that the creep mechanism for the T6-200℃/1h sample is cross-slip between basal and prismatic dislocations,while the T6-275℃/8h sample exhibits a mixed mechanism of dislocation cross-slip and climb.Compared with the Al_(2)Ca phase,the dense G.P.zones effectively impede dislocation climb and glide during the creep process,demonstrating superior creep resistance of the T6-200℃/1h sample.
基金supported by the National Natural Science Foundation of China(Nos.52105330,52175307)the Natural Science Foundation of Shandong Province,China(No.ZR2023JQ021)。
文摘The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.
基金financially supported by the National Key Research and Development Program of China(No.2021YFB3701000)the National Natural Science Foundation of China(Nos.52471118,52101125,U2037601,and U21A2048)Young Elite Scientists Sponsorship Program by CAST,China(No.2022QNRC001)。
文摘The dependence of shrinkage porosities on microstructure characteristics of Mg−12Al alloy was investigated.The distribution,morphology,size,and number density of shrinkage porosities were analyzed under different cooling rates.The relationship between shrinkage porosities and microstructure characteristics was discussed in terms of temperature conditions,feeding channel characteristics,and feeding capacity.Further,the feeding behavior of the residual liquid phase in the solid skeleton was quantified by introducing permeability.Results show a strong correlation between the solid microstructure skeleton and shrinkage porosity characteristics.An increase in permeability corresponds to a declining number density of shrinkage porosities.This study aims to provide a more complete understanding how to reduce shrinkage porosities by controlling microstructure characteristics.
基金supported by the National Key Research and Development Program of China (Grant Nos.2023YFA1406200 and 2022YFA-1405500)the National Natural Science Foundation of China (Grant Nos.12304021 and 52072188)+3 种基金Zhejiang Provincial Natural Science Foundation of China (Grant Nos.LQ23A040004 and MS26A040028)Natural Science Foundation of Ningbo (Grant Nos.2022J091 and ZX2025001430)the Program for Science and Technology Innovation Team in Zhejiang (Grant No.2021R01004)the Program for Changjiang Scholars and Innovative Research Team in University (Grant No.IRT_15R23)。
文摘High-pressure electrides,characterized by the presence of interstitial quasi-atoms(ISQs),possess unique electronic structures and physical properties,such as diverse dimensions of electride states exhibiting different superconductivity,which has attracted significant attention.Here,we report a new electron-deficient type of electride Li_(4)Al and identify its phase transition progress with pressurization,where the internal driving force behind phase transitions,bonding characteristics,and superconducting behaviors have been revealed based on first-principles density functional theory.Through analysis of the bonding properties of electride Li_(4)Al,we demonstrate that the ISQs exhibiting increasingly covalent characteristics between Al ions play a critical role in driving the phase transition.Our electron–phonon coupling calculations indicate that all phases exhibit superconducting behaviors.Importantly,we prove that the ISQs behave as free electrons and demonstrate that the factor governing T_(c) is primarily derived from Li-p-hybridized electronic states with ISQ compositions.These electronic states are scattered by low-frequency phonons arising from mixed vibrations of Li and Al affected by ISQs to enhance electron–phonon coupling.Our study largely expands the research scope of electrides,provides new insight for understanding phase transitions,and elucidates the effects of ISQs on superconducting behavior.
基金supported by the National Natural Science Foundation of China(Grant No.52235006)the National Key Research and Development Program of China(Grant No.2022YFB4600500)+3 种基金the National Natural Science Foundation of China(Grant Nos.52025053 and 52105303)the Natural Science Foundation of Jilin Province(Grant No.20220101209JC)the Postdoctoral Fellow-ship Program of CPSF(Grant GZC20240587 and GZC20230944)the Graduate Innovation Fund of Jilin University(2024CX063).
文摘1.Introduction.The Ti6Al4V alloy is extensively utilized across various indus-trial sectors due to its favorable characteristics,such as lightweight design,high strength,and resistance to corrosion[1].In effort s to further reduce weight,functional elements like electric actuators can be substituted with intelligent materials like shape memory alloys(SMAs)[2,3].Among SMAs,NiTi alloy stands out for its sens-ing and actuation capabilities,significantly enhancing the safety and reliability of engineering structures[4,5].Integrating Ti6Al4V and NiTi alloys within a single component holds the potential to provide precise feedback on mechanical,thermal,or environmen-tal conditions[6,7].
