With the increased competition of modern economy and globalization,consumer creation which based on the analysis of consumer behavior was more and more attentioned and respected by business.Based on the meaning and ch...With the increased competition of modern economy and globalization,consumer creation which based on the analysis of consumer behavior was more and more attentioned and respected by business.Based on the meaning and characteristics of agricultural product consumer creation,index system of value model of agricultural product consumer creation was put forward through analytical hierarchy process（AHP）.The weights of the indicators and related indicators of impact on the value were analyzed,and value models of agricultural product consumer creation were constructed to provide ideas for development of agricultural product consumer market and research of consumer value.Consumer creation was constructed to provide ideas for development of agricultural product consumer market and research of consumer value.展开更多
The parameters of facial skin on human body were measured by Visia-CR,and the weight coefficients of each evaluation index were clarified by the analytic hierarchy process,thus the comprehensive score was calculated.T...The parameters of facial skin on human body were measured by Visia-CR,and the weight coefficients of each evaluation index were clarified by the analytic hierarchy process,thus the comprehensive score was calculated.The influence of four film-forming agents on the comprehensive score at different quality fractions was examined by single factor experiment to determine the level of each factor.In addition,the optimal proportion of the four film-forming agents was selected by combining multi-indicator comprehensive scoring method and orthogonal experiment.The results show that the best combination of the four film-forming agents in the 8 h wear test is A_(2)B_(2)C_(2)D_(1),and the quality fractions of each component are 2%of trimethylsiloxy silicate,1%of polydimethylsiloxane,2%of(acrylate(ester)/poly(dimethylsiloxane)copolymer,cyclopentasiloxane)and 0.5%of VP/hexadecene copolymer.展开更多
Renewable energy sources,including wind,solar,and biofuels,are essential for promoting sustainable economic development and mitigating environmental challenges.As China’s overseas investments in renewable energy expa...Renewable energy sources,including wind,solar,and biofuels,are essential for promoting sustainable economic development and mitigating environmental challenges.As China’s overseas investments in renewable energy expand,effective risk assessment and management have become critical.This study develops a comprehensive risk evaluation framework for China’s overseas renewable energy investments using the Fuzzy Analytic Hierarchy Process(FAHP).The framework incorporates political,economic,and project-specific risks,organized through three primary criteria,nine sub-criteria,and thirty tertiary indicators.By integrating expert judgments with fuzzy set theory,the FAHP methodology assigns accurate weights to risk factors and ensures consistency in evaluation.The findings identify political risks as the most significant,emphasizing their influence on investment strategies.These insights offer valuable guidance for policymakers and investors to enhance risk management strategies and ensure the sustainability of China’s renewable energy initiatives abroad.展开更多
In the present scenario,tapping the unutilised hydropower potential is one of the highest priorities in developing countries of the world.Special emphasis is being imparted to run of the river(RoR)mode of power genera...In the present scenario,tapping the unutilised hydropower potential is one of the highest priorities in developing countries of the world.Special emphasis is being imparted to run of the river(RoR)mode of power generation.However,the governments are now facing the dilemma whether to promote small hydropower projects(SHPs) or encourage large hydropower projects(LHPs).RoR large hydropower projects result into large scale cutting of mountains for constructing tunnels and access roads,generation of huge quantity of muck and large scale impact on flora and fauna due to diversion of rivers/streams.On the other hand,though SHPs are claimed to be greener and more sustainable by a section of researchers and energy planners but,they will be required to be set up in large number to generate equivalent amount of electricity.The aim of this study is to rank the most sustainable installed capacity range of RoR hydropower projects.To achieve this aim,the study proposes the use of quite popular multi-criteria decision making(MCDM)method of Operation Research named Analytical Hierarchy Process.A case study has been presented from Himachal Pradesh,a hydro rich state located in the western Himalayan region.As per sustainability assessment carried out in this study,hydropower projects in the capacity range 1 to 5 MW have been ranked to be the most sustainable.展开更多
Noise pollution is one of the most significant harmful physical factors in the industrial and occupational environments.Due to the high costs of exposure to excessive noise;continuous sound evaluation,propose and impl...Noise pollution is one of the most significant harmful physical factors in the industrial and occupational environments.Due to the high costs of exposure to excessive noise;continuous sound evaluation,propose and implement noise control plans in occupational environments is necessary.Thus,the present study aimed to review environmental sound measurements,drawing of noise maps,and prioritizing the engineering noise control methods using the Analytic Hierarchy Process(AHP).This study was a descriptive-analytical study that aimed to assess occupational noises and present a control plan in the City Gas Stations(CGSs)of Kerman,Iran in 2021.The present study was done in two phases.In the first phase,six CGSs were investigated to measure and evaluate the noise.In addition,the noise map of a CGS was drawn using the Surfer software.Finally,the AHP was used in the second phase of the research to prioritize the control measures.In this phase,four criteria and ten alternatives were identified.According to first phase results,the sound pressure level(SPL)of the stations varied from 76 to 98 dBA.Besides,the majority of the studied stations had a sound level higher than 85 dBA(danger zone).The second phase of the study showed that out of the four evaluated criteria,the executability criterion had the highest impact and the cost criterion had the lowest impact on the selection of control measures with a weight of 0.587 and 0.052,respectively.Based on the results of prioritization of the alternatives,using a silenced regulator(weight of 0.223)and increasing the thickness of the tube(weight of 0.023)had the highest and lowest priorities among the alternatives,respectively.The use of engineering noise control methods such as using silenced regulators was the best way to control the noises of CGSs.Additionally;it is noteworthy that AHP is a practical method for prioritizing alternatives to achieve the most accurate decision-making.The results of AHP can be of great help to health and safety experts and managers in choosing the sound engineering control measures more precisely.展开更多
The selection of a landfill site is considered as a complicated task because this process is based on many factors and restrictions. For Al-Qasim Qadhaa, which is situated in the southern part of the Babylon Governora...The selection of a landfill site is considered as a complicated task because this process is based on many factors and restrictions. For Al-Qasim Qadhaa, which is situated in the southern part of the Babylon Governorate, Iraq, there is no landfill site in that area that conforms to the scientific criteria for selecting sites for landfill. For this reason, 15 criteria were adopted in this study （groundwater depth, rivers, soil types, agriculture lands use, land use, elevation, slope, gas pipelines, oil pipelines, power lines, roads, railways, urban centers, villages and archaeological sites） using GIS （geographic information system）, which has a large ability to manage input data. In addition, the AHP （analytical hierarchy process） method was used to derive the relative weightings for each criterion using pair-wise comparison. To obtain the suitability index for candidate landfill sites, a weighted linear combination method was used. After combining these methods, two suitable candidate landfill sites, with areas of 2.766 km2 and 2.055 km2, respectively, were found to satisfy the scientific and environmental requirements. The area of these sites can accommodate solid waste from 2020 until 2030 based on the required area, which was 0.702 km2.展开更多
This study was undertaken to develop a numerical process that can be used as a quality criterion to determine the technological value of the Egyptian cotton varieties, which in turn would denote the end-use of their f...This study was undertaken to develop a numerical process that can be used as a quality criterion to determine the technological value of the Egyptian cotton varieties, which in turn would denote the end-use of their fibers. However the material used in the study comprised the 6 Egyptian cotton varieties Giza70, Giza80, Giza86, Giza88, Giza90 and Giza92. According to the local practice in Egypt, Giza70, Giza88 and Giza92 belong to the Extra-Long Staple (ELS) category, while Giza80, Giza86 and Giza90 are included under the Long Staple (LS) category. The regression analysis of the relationships between fiber properties and yarn skein strength (lea product) of the 2 carded ring counts 40 and 50 Ne, was employed to drive an equation for calculating the Multiplicative Analytic Hierarchy Process (MIAHP) values. The values of the MIAHP have been used as numerical determinations of the technological values of the Egyptian cotton varieties. Nevertheless, the findings of this study clarified that with respect to the criteria weights, the pair-wise comparisons denoted that fiber length properties of Egyptian cotton ranked first where they revealed the most dominant effect on yarn strength, while tensile properties ranked second with a relative weight close to that of fiber length. On the contrary, the relative weight of fiber fineness (micronaire reading) was found to be marginal. With regard to the relative weight of sub-criterion, the pair-wise comparisons indicated that the role of fiber tenacity as a determinant of yarn strength is much superior to that of fiber elongation. Further the global weights of the sub-criterion of fiber length pointed out that the UHML (upper half mean length) plays an important role in determining yarn strength of the Egyptian cotton comparing with either the UI (uniformity index) or the SFC (short fiber content). In conformity with the values of the MIAHP, it was found that in the order of descending rank, Giza88 ranked first, followed by Giza92, Giza70, Giza86, Giza80 and finally Giza90.展开更多
This paper determines benchmarking criteria from the actors＇ point of view, who are involved in benchmarking processes within four Libyan industrial companies （LICs）. It also describes an application of the analyti...This paper determines benchmarking criteria from the actors＇ point of view, who are involved in benchmarking processes within four Libyan industrial companies （LICs）. It also describes an application of the analytic hierarchy process （AHP）, which can help an organization to determine its benchmarking criteria. It presents a structured hierarchy for assessing the key capabilities using the AHP. The hierarchy is illustrated using the four main criteria that manufacturing companies will consider when carrying out benchmarking. AHP and benchmarking techniques make the implementation and analysis studies more effective, easy, and applicable to companies. Further, AHP is used to calculate the relative weights of criteria, sub-criteria, and specific sub-criteria, to prioritize them, and finally to select the important benchmarking criteria within each of the four companies investigated. The overall findings suggest that quality control is the most important criterion considered to be benchmarked in companies Q and R. Meanwhile, cost control is considered as the most important criterion to be benchmarked in companies S and T1.展开更多
The paper shows a proposition of metrics for measuring the complexity of the business organization and business software. The metrics is based on a subjective estimation of complexity of the elements from a part of th...The paper shows a proposition of metrics for measuring the complexity of the business organization and business software. The metrics is based on a subjective estimation of complexity of the elements from a part of the structure of business organization or business software in relation to other elements from the observed part. Estimation is performed based on the measuring scale for comparison of complexity of elements, and reaching a final conclusion on the complexity of elements in relation to other elements, through the Analytic Hierarchy Process （AHP）. Defined in this manner, the metrics represents a unique metrics for measuring the complexity of elements of business organization and business software, which enables their comparison. The paper also presents a short overview of existing metrics for measuring the complexity of business organization and business software.展开更多
The Enterprise Resource Planning (ERP) system is a complex and comprehensive software that integrates various enterprise’s functions and resources. ERP system cleanly encapsulates crosscutting concerns which cannot b...The Enterprise Resource Planning (ERP) system is a complex and comprehensive software that integrates various enterprise’s functions and resources. ERP system cleanly encapsulates crosscutting concerns which cannot be encapsulated by other types of information systems like data synchronization and standardization, system complexity and system modularity. Many studies are conducted to propose software quality models with their quality characteristics. However, there is currently no dedicated software quality model that can describe and involve new features of ERP systems. Thus, this study has proposed an ERP system quality model (ERPSQM). Analytic Hierarchy Process AHP has been employed to evaluate the quality of ERPSQM. Furthermore, this proposed model can be used to make a comparison of ERP systems to help companies implement better systems.展开更多
The purpose of this study is to review and demonstrate how analytic hierarchy process （AHP） can be employed to determine earnings quality. The AHP technique can make the analysis studies more effective, easy, and ap...The purpose of this study is to review and demonstrate how analytic hierarchy process （AHP） can be employed to determine earnings quality. The AHP technique can make the analysis studies more effective, easy, and applicable to companies to calculate the relative weights of each dimension, sub-dimension, and specific sub-dimension of earnings quality. A common understanding of earnings quality is difficult to define and even more difficult to measure precisely. In addition to this, the earnings quality is influenced by factors which are often intangible and immeasurable and, as such, when assessing earnings quality, judgments will be largely subjective. Further, earnings quality is related to business concepts or practices and affected by other factors such as the nature and source of earnings. In relation to this, earnings quality would be directly influenced by the conservatism of the chosen methods. However, earnings quality relates to the persistence of earnings and to the likelihood of cash realization on reported eamings. Overall, the results presented from the paramorphic model under AHP are meant to be descriptive of the decision process of five investment analysts within three different companies. The results in this study offer valuable insights into how a small population of investment analysts actually decides the relative importance of various earnings quality dimensions.展开更多
Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluatio...Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluation is introduced to make decision in slicing schemes for a processing part. The application in determining the slicing scheme for a computer mouse during prototyping shows that the method increases the rationality during decision- making and improves quality and efficiency for the prototyping part.展开更多
By analyzing the existing methods for the bridge bearing capacity assessment, an analytic hierarchy pro cess estimation model with a variable weight and fuzzy description is proposed based on the nondestructive infor ...By analyzing the existing methods for the bridge bearing capacity assessment, an analytic hierarchy pro cess estimation model with a variable weight and fuzzy description is proposed based on the nondestructive infor mation. Considering the actual strength, the bearing capacity is first calculated from its design state, and then modified based on the detection information. The modification includes the section reduction and the structure deterioration. The section reduction involves the concrete section and the steel cross-section reduction. The structure deterioration is decided by six factors, i.e. , the concrete surface damage, the actual concrete strength, the steel corrosion electric potential, the chloride ion content, the carbonization depth, and the protective layer depth. The initial weight of each factor is calculated by the expert judgment matrix using an analytic hierarchy process. The consistency approximation and the error transfer theory are used. Then, the variable weight is in- troduced to expand the influences of factors in the worse state. Finally, an actual bridge is taken as an example to verify the proposed method. Results show that the estimated capacity agrees well with that of the load test, thus the method is objective and credible展开更多
A min-max optimization method is proposed as a new approach to deal with the weight determination problem in the context of the analytic hierarchy process. The priority is obtained through minimizing the maximal absol...A min-max optimization method is proposed as a new approach to deal with the weight determination problem in the context of the analytic hierarchy process. The priority is obtained through minimizing the maximal absolute difference between the weight vector obtained from each column and the ideal weight vector. By transformation, the. constrained min- max optimization problem is converted to a linear programming problem, which can be solved using either the simplex method or the interior method. The Karush-Kuhn- Tucker condition is also analytically provided. These control thresholds provide a straightforward indication of inconsistency of the pairwise comparison matrix. Numerical computations for several case studies are conducted to compare the performance of the proposed method with three existing methods. This observation illustrates that the min-max method controls maximum deviation and gives more weight to non- dominate factors.展开更多
Landfilling is one of the most effective and responsible ways to dispose of municipal solid waste(MSW).Identifying landfill sites,however,is a challenging and complex undertaking because it depends on social,environme...Landfilling is one of the most effective and responsible ways to dispose of municipal solid waste(MSW).Identifying landfill sites,however,is a challenging and complex undertaking because it depends on social,environmental,technical,economic,and legal issues.This study aims to map the optimal sites that were environmentally suitable for locating a landfill site in Butuan City,Philippines.With reference to the policy requirements from DENR Section I,Landfill Site Identification Criteria and Screening Guidelines of National Solid Waste Management Commission,the integration of a Geographic Information System(GIS)model builder and Analytical Hierarchy Process(AHP)has been used in this study to address the aforementioned challenges related to the landfill site suitability analysis.Based on the generated sanitary landfill suitability map,results showed that Barangay Tungao(1131.42967 ha)and Florida(518.48 ha)were able to meet and consider the three(3)main components,namely economic,environmental,and physical criteria,and are highly suitable as landfill site locations in Butuan City.It is recommended that there will conduct a geotechnical evaluation,involving rigorous geological and hydrogeological assessment employing a combination of site investigation and laboratory techniques.In addition,additional specific social,ecological,climatic,and economic factors need to be considered(i.e.including impact on humans,flora,fauna,soil,water,air,climate,and landscape).展开更多
Recent research carried out in the public sector shows that outsourcing can indisputably bring many benefits to the organizations which master the art of devising, deploying and maintaining outsourcing relationships. ...Recent research carried out in the public sector shows that outsourcing can indisputably bring many benefits to the organizations which master the art of devising, deploying and maintaining outsourcing relationships. However, for many organizations, these benefits remain elusive, while outsourcing projects are usually accompanied by unexpected and often negative effects. The paper focuses on in-depth analysis of the current situation concerning outsourcing of information technology projects （IT-projects） in Slovenian public sector. Presented research initially analyses substantive, procedural and other relevant aspects of outsourcing and provides a set of applicable decision making criteria. Stemming from the analysis results, this paper eventually presents the development of a multi criteria decision-support model based on Analytic Hierarchy Process （AHP） which could facilitate enhanced evaluation, selection and implementation of IT outsourcing projects in the public sector.展开更多
A new approach combining the certainty factor(CF) and analytic hierarchy process(AHP) methods was proposed to assess landslide susceptibility in the Ziyang district, which is situated in the Qin-Ba Mountain region, Ch...A new approach combining the certainty factor(CF) and analytic hierarchy process(AHP) methods was proposed to assess landslide susceptibility in the Ziyang district, which is situated in the Qin-Ba Mountain region, China. Landslide inventory data were collected based on field investigations and remote sensing interpretations. A total of 791 landslides were identified. A total of 633 landslides were randomly selected from this data setas the training set, and the remaining landslides were used for validation as the test set. Nine factors, including the slope angle, slope aspect, slope curvature, lithology, distance to faults, distance to streams, precipitation, road network intensity degree and land use were chosen as the landslide causal factors for further susceptibility assessment. The weight of each factor and its subclass were calculated by AHP and CF methods. Landslide susceptibility was compared between the bivariate statistical method and the proposed CF-AHP method. The results indicate that the distance to streams, distance to faults and lithology are the most dominant causal factors associated with landslides. The susceptibility zonation was categorized into five classes of landslide susceptibility, i.e., very high, high, moderate, low and very low level. Lastly, the relative operating characteristics(ROC) curve was used to validate the accuracy of the new approach, and the result showed a satisfactory prediction rate of 78.3%, compared to 69.2% obtained with the landslide susceptibility index method. The results indicate that the CF-AHP combined method is more appropriate for assessing the landslide susceptibility in this area.展开更多
To improve the inconsistency in the analytic hierarchy process(AHP), a new method based on marginal optimization theory is proposed. During the improving process, this paper regards the reduction of consistency ratio(...To improve the inconsistency in the analytic hierarchy process(AHP), a new method based on marginal optimization theory is proposed. During the improving process, this paper regards the reduction of consistency ratio(CR) as benefit, and the maximum modification compared to the original pairwise comparison matrix(PCM) as cost, then the improvement of consistency is transformed to a benefit/cost analysis problem. According to the maximal marginal effect principle, the elements of PCM are modified by a fixed increment(or decrement) step by step till the consistency ratio becomes acceptable, which can ensure minimum adjustment to the original PCM so that the decision makers’ judgment is preserved as much as possible. The correctness of the proposed method is proved mathematically by theorem. Firstly, the marginal benefit/cost ratio is calculated for each single element of the PCM when it has been modified by a fixed increment(or decrement).Then, modification to the element with the maximum marginal benefit/cost ratio is accepted. Next, the marginal benefit/cost ratio is calculated again upon the revised matrix, and followed by choosing the modification to the element with the maximum marginal benefit/cost ratio. The process of calculating marginal effect and choosing the best modified element is repeated for each revised matrix till acceptable consistency is reached, i.e., CR<0.1. Finally,illustrative examples show the proposed method is more effective and better in preserving the original comparison information than existing methods.展开更多
基金Supported by Rural Development Research Center in Sichuan(2009CR2110921)~~
文摘With the increased competition of modern economy and globalization,consumer creation which based on the analysis of consumer behavior was more and more attentioned and respected by business.Based on the meaning and characteristics of agricultural product consumer creation,index system of value model of agricultural product consumer creation was put forward through analytical hierarchy process（AHP）.The weights of the indicators and related indicators of impact on the value were analyzed,and value models of agricultural product consumer creation were constructed to provide ideas for development of agricultural product consumer market and research of consumer value.Consumer creation was constructed to provide ideas for development of agricultural product consumer market and research of consumer value.
文摘The parameters of facial skin on human body were measured by Visia-CR,and the weight coefficients of each evaluation index were clarified by the analytic hierarchy process,thus the comprehensive score was calculated.The influence of four film-forming agents on the comprehensive score at different quality fractions was examined by single factor experiment to determine the level of each factor.In addition,the optimal proportion of the four film-forming agents was selected by combining multi-indicator comprehensive scoring method and orthogonal experiment.The results show that the best combination of the four film-forming agents in the 8 h wear test is A_(2)B_(2)C_(2)D_(1),and the quality fractions of each component are 2%of trimethylsiloxy silicate,1%of polydimethylsiloxane,2%of(acrylate(ester)/poly(dimethylsiloxane)copolymer,cyclopentasiloxane)and 0.5%of VP/hexadecene copolymer.
基金supported by the project VSB-TU Ostrava,SP2024/045.
文摘Renewable energy sources,including wind,solar,and biofuels,are essential for promoting sustainable economic development and mitigating environmental challenges.As China’s overseas investments in renewable energy expand,effective risk assessment and management have become critical.This study develops a comprehensive risk evaluation framework for China’s overseas renewable energy investments using the Fuzzy Analytic Hierarchy Process(FAHP).The framework incorporates political,economic,and project-specific risks,organized through three primary criteria,nine sub-criteria,and thirty tertiary indicators.By integrating expert judgments with fuzzy set theory,the FAHP methodology assigns accurate weights to risk factors and ensures consistency in evaluation.The findings identify political risks as the most significant,emphasizing their influence on investment strategies.These insights offer valuable guidance for policymakers and investors to enhance risk management strategies and ensure the sustainability of China’s renewable energy initiatives abroad.
文摘In the present scenario,tapping the unutilised hydropower potential is one of the highest priorities in developing countries of the world.Special emphasis is being imparted to run of the river(RoR)mode of power generation.However,the governments are now facing the dilemma whether to promote small hydropower projects(SHPs) or encourage large hydropower projects(LHPs).RoR large hydropower projects result into large scale cutting of mountains for constructing tunnels and access roads,generation of huge quantity of muck and large scale impact on flora and fauna due to diversion of rivers/streams.On the other hand,though SHPs are claimed to be greener and more sustainable by a section of researchers and energy planners but,they will be required to be set up in large number to generate equivalent amount of electricity.The aim of this study is to rank the most sustainable installed capacity range of RoR hydropower projects.To achieve this aim,the study proposes the use of quite popular multi-criteria decision making(MCDM)method of Operation Research named Analytical Hierarchy Process.A case study has been presented from Himachal Pradesh,a hydro rich state located in the western Himalayan region.As per sustainability assessment carried out in this study,hydropower projects in the capacity range 1 to 5 MW have been ranked to be the most sustainable.
文摘Noise pollution is one of the most significant harmful physical factors in the industrial and occupational environments.Due to the high costs of exposure to excessive noise;continuous sound evaluation,propose and implement noise control plans in occupational environments is necessary.Thus,the present study aimed to review environmental sound measurements,drawing of noise maps,and prioritizing the engineering noise control methods using the Analytic Hierarchy Process(AHP).This study was a descriptive-analytical study that aimed to assess occupational noises and present a control plan in the City Gas Stations(CGSs)of Kerman,Iran in 2021.The present study was done in two phases.In the first phase,six CGSs were investigated to measure and evaluate the noise.In addition,the noise map of a CGS was drawn using the Surfer software.Finally,the AHP was used in the second phase of the research to prioritize the control measures.In this phase,four criteria and ten alternatives were identified.According to first phase results,the sound pressure level(SPL)of the stations varied from 76 to 98 dBA.Besides,the majority of the studied stations had a sound level higher than 85 dBA(danger zone).The second phase of the study showed that out of the four evaluated criteria,the executability criterion had the highest impact and the cost criterion had the lowest impact on the selection of control measures with a weight of 0.587 and 0.052,respectively.Based on the results of prioritization of the alternatives,using a silenced regulator(weight of 0.223)and increasing the thickness of the tube(weight of 0.023)had the highest and lowest priorities among the alternatives,respectively.The use of engineering noise control methods such as using silenced regulators was the best way to control the noises of CGSs.Additionally;it is noteworthy that AHP is a practical method for prioritizing alternatives to achieve the most accurate decision-making.The results of AHP can be of great help to health and safety experts and managers in choosing the sound engineering control measures more precisely.
文摘The selection of a landfill site is considered as a complicated task because this process is based on many factors and restrictions. For Al-Qasim Qadhaa, which is situated in the southern part of the Babylon Governorate, Iraq, there is no landfill site in that area that conforms to the scientific criteria for selecting sites for landfill. For this reason, 15 criteria were adopted in this study （groundwater depth, rivers, soil types, agriculture lands use, land use, elevation, slope, gas pipelines, oil pipelines, power lines, roads, railways, urban centers, villages and archaeological sites） using GIS （geographic information system）, which has a large ability to manage input data. In addition, the AHP （analytical hierarchy process） method was used to derive the relative weightings for each criterion using pair-wise comparison. To obtain the suitability index for candidate landfill sites, a weighted linear combination method was used. After combining these methods, two suitable candidate landfill sites, with areas of 2.766 km2 and 2.055 km2, respectively, were found to satisfy the scientific and environmental requirements. The area of these sites can accommodate solid waste from 2020 until 2030 based on the required area, which was 0.702 km2.
文摘This study was undertaken to develop a numerical process that can be used as a quality criterion to determine the technological value of the Egyptian cotton varieties, which in turn would denote the end-use of their fibers. However the material used in the study comprised the 6 Egyptian cotton varieties Giza70, Giza80, Giza86, Giza88, Giza90 and Giza92. According to the local practice in Egypt, Giza70, Giza88 and Giza92 belong to the Extra-Long Staple (ELS) category, while Giza80, Giza86 and Giza90 are included under the Long Staple (LS) category. The regression analysis of the relationships between fiber properties and yarn skein strength (lea product) of the 2 carded ring counts 40 and 50 Ne, was employed to drive an equation for calculating the Multiplicative Analytic Hierarchy Process (MIAHP) values. The values of the MIAHP have been used as numerical determinations of the technological values of the Egyptian cotton varieties. Nevertheless, the findings of this study clarified that with respect to the criteria weights, the pair-wise comparisons denoted that fiber length properties of Egyptian cotton ranked first where they revealed the most dominant effect on yarn strength, while tensile properties ranked second with a relative weight close to that of fiber length. On the contrary, the relative weight of fiber fineness (micronaire reading) was found to be marginal. With regard to the relative weight of sub-criterion, the pair-wise comparisons indicated that the role of fiber tenacity as a determinant of yarn strength is much superior to that of fiber elongation. Further the global weights of the sub-criterion of fiber length pointed out that the UHML (upper half mean length) plays an important role in determining yarn strength of the Egyptian cotton comparing with either the UI (uniformity index) or the SFC (short fiber content). In conformity with the values of the MIAHP, it was found that in the order of descending rank, Giza88 ranked first, followed by Giza92, Giza70, Giza86, Giza80 and finally Giza90.
文摘This paper determines benchmarking criteria from the actors＇ point of view, who are involved in benchmarking processes within four Libyan industrial companies （LICs）. It also describes an application of the analytic hierarchy process （AHP）, which can help an organization to determine its benchmarking criteria. It presents a structured hierarchy for assessing the key capabilities using the AHP. The hierarchy is illustrated using the four main criteria that manufacturing companies will consider when carrying out benchmarking. AHP and benchmarking techniques make the implementation and analysis studies more effective, easy, and applicable to companies. Further, AHP is used to calculate the relative weights of criteria, sub-criteria, and specific sub-criteria, to prioritize them, and finally to select the important benchmarking criteria within each of the four companies investigated. The overall findings suggest that quality control is the most important criterion considered to be benchmarked in companies Q and R. Meanwhile, cost control is considered as the most important criterion to be benchmarked in companies S and T1.
文摘The paper shows a proposition of metrics for measuring the complexity of the business organization and business software. The metrics is based on a subjective estimation of complexity of the elements from a part of the structure of business organization or business software in relation to other elements from the observed part. Estimation is performed based on the measuring scale for comparison of complexity of elements, and reaching a final conclusion on the complexity of elements in relation to other elements, through the Analytic Hierarchy Process （AHP）. Defined in this manner, the metrics represents a unique metrics for measuring the complexity of elements of business organization and business software, which enables their comparison. The paper also presents a short overview of existing metrics for measuring the complexity of business organization and business software.
文摘The Enterprise Resource Planning (ERP) system is a complex and comprehensive software that integrates various enterprise’s functions and resources. ERP system cleanly encapsulates crosscutting concerns which cannot be encapsulated by other types of information systems like data synchronization and standardization, system complexity and system modularity. Many studies are conducted to propose software quality models with their quality characteristics. However, there is currently no dedicated software quality model that can describe and involve new features of ERP systems. Thus, this study has proposed an ERP system quality model (ERPSQM). Analytic Hierarchy Process AHP has been employed to evaluate the quality of ERPSQM. Furthermore, this proposed model can be used to make a comparison of ERP systems to help companies implement better systems.
文摘The purpose of this study is to review and demonstrate how analytic hierarchy process （AHP） can be employed to determine earnings quality. The AHP technique can make the analysis studies more effective, easy, and applicable to companies to calculate the relative weights of each dimension, sub-dimension, and specific sub-dimension of earnings quality. A common understanding of earnings quality is difficult to define and even more difficult to measure precisely. In addition to this, the earnings quality is influenced by factors which are often intangible and immeasurable and, as such, when assessing earnings quality, judgments will be largely subjective. Further, earnings quality is related to business concepts or practices and affected by other factors such as the nature and source of earnings. In relation to this, earnings quality would be directly influenced by the conservatism of the chosen methods. However, earnings quality relates to the persistence of earnings and to the likelihood of cash realization on reported eamings. Overall, the results presented from the paramorphic model under AHP are meant to be descriptive of the decision process of five investment analysts within three different companies. The results in this study offer valuable insights into how a small population of investment analysts actually decides the relative importance of various earnings quality dimensions.
基金Supported by the Science and Technology Support Key Project of Jiangsu Province (DE2008365)~~
文摘Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluation is introduced to make decision in slicing schemes for a processing part. The application in determining the slicing scheme for a computer mouse during prototyping shows that the method increases the rationality during decision- making and improves quality and efficiency for the prototyping part.
基金Supported by the Jiangshu Province Communication Scientific Research Project(06Y21)Zhejiang Province Road Scientific Research Project(2007-013-11L)~~
文摘By analyzing the existing methods for the bridge bearing capacity assessment, an analytic hierarchy pro cess estimation model with a variable weight and fuzzy description is proposed based on the nondestructive infor mation. Considering the actual strength, the bearing capacity is first calculated from its design state, and then modified based on the detection information. The modification includes the section reduction and the structure deterioration. The section reduction involves the concrete section and the steel cross-section reduction. The structure deterioration is decided by six factors, i.e. , the concrete surface damage, the actual concrete strength, the steel corrosion electric potential, the chloride ion content, the carbonization depth, and the protective layer depth. The initial weight of each factor is calculated by the expert judgment matrix using an analytic hierarchy process. The consistency approximation and the error transfer theory are used. Then, the variable weight is in- troduced to expand the influences of factors in the worse state. Finally, an actual bridge is taken as an example to verify the proposed method. Results show that the estimated capacity agrees well with that of the load test, thus the method is objective and credible
基金The US National Science Foundation (No. CMMI-0408390,CMMI-0644552,BCS-0527508)the National Natural Science Foundation of China (No. 51010044,U1134206)+2 种基金the Fok YingTong Education Foundation (No. 114024)the Natural Science Foundation of Jiangsu Province (No. BK2009015)the Postdoctoral Science Foundation of Jiangsu Province (No. 0901005C)
文摘A min-max optimization method is proposed as a new approach to deal with the weight determination problem in the context of the analytic hierarchy process. The priority is obtained through minimizing the maximal absolute difference between the weight vector obtained from each column and the ideal weight vector. By transformation, the. constrained min- max optimization problem is converted to a linear programming problem, which can be solved using either the simplex method or the interior method. The Karush-Kuhn- Tucker condition is also analytically provided. These control thresholds provide a straightforward indication of inconsistency of the pairwise comparison matrix. Numerical computations for several case studies are conducted to compare the performance of the proposed method with three existing methods. This observation illustrates that the min-max method controls maximum deviation and gives more weight to non- dominate factors.
文摘Landfilling is one of the most effective and responsible ways to dispose of municipal solid waste(MSW).Identifying landfill sites,however,is a challenging and complex undertaking because it depends on social,environmental,technical,economic,and legal issues.This study aims to map the optimal sites that were environmentally suitable for locating a landfill site in Butuan City,Philippines.With reference to the policy requirements from DENR Section I,Landfill Site Identification Criteria and Screening Guidelines of National Solid Waste Management Commission,the integration of a Geographic Information System(GIS)model builder and Analytical Hierarchy Process(AHP)has been used in this study to address the aforementioned challenges related to the landfill site suitability analysis.Based on the generated sanitary landfill suitability map,results showed that Barangay Tungao(1131.42967 ha)and Florida(518.48 ha)were able to meet and consider the three(3)main components,namely economic,environmental,and physical criteria,and are highly suitable as landfill site locations in Butuan City.It is recommended that there will conduct a geotechnical evaluation,involving rigorous geological and hydrogeological assessment employing a combination of site investigation and laboratory techniques.In addition,additional specific social,ecological,climatic,and economic factors need to be considered(i.e.including impact on humans,flora,fauna,soil,water,air,climate,and landscape).
文摘Recent research carried out in the public sector shows that outsourcing can indisputably bring many benefits to the organizations which master the art of devising, deploying and maintaining outsourcing relationships. However, for many organizations, these benefits remain elusive, while outsourcing projects are usually accompanied by unexpected and often negative effects. The paper focuses on in-depth analysis of the current situation concerning outsourcing of information technology projects （IT-projects） in Slovenian public sector. Presented research initially analyses substantive, procedural and other relevant aspects of outsourcing and provides a set of applicable decision making criteria. Stemming from the analysis results, this paper eventually presents the development of a multi criteria decision-support model based on Analytic Hierarchy Process （AHP） which could facilitate enhanced evaluation, selection and implementation of IT outsourcing projects in the public sector.
基金financial support from National Natural Science Foundation of China (Grant No. 41272282)National Natural Science Foundation of China-Youth Foundation (Grant No. 41402254)+1 种基金geological disaster survey projects of China Geological Survey (Grant No. 1212011220135, Grant No. DDW2016-01)the Fundamental Research Funds for the Central Universities (Grant No. 310826175030)
文摘A new approach combining the certainty factor(CF) and analytic hierarchy process(AHP) methods was proposed to assess landslide susceptibility in the Ziyang district, which is situated in the Qin-Ba Mountain region, China. Landslide inventory data were collected based on field investigations and remote sensing interpretations. A total of 791 landslides were identified. A total of 633 landslides were randomly selected from this data setas the training set, and the remaining landslides were used for validation as the test set. Nine factors, including the slope angle, slope aspect, slope curvature, lithology, distance to faults, distance to streams, precipitation, road network intensity degree and land use were chosen as the landslide causal factors for further susceptibility assessment. The weight of each factor and its subclass were calculated by AHP and CF methods. Landslide susceptibility was compared between the bivariate statistical method and the proposed CF-AHP method. The results indicate that the distance to streams, distance to faults and lithology are the most dominant causal factors associated with landslides. The susceptibility zonation was categorized into five classes of landslide susceptibility, i.e., very high, high, moderate, low and very low level. Lastly, the relative operating characteristics(ROC) curve was used to validate the accuracy of the new approach, and the result showed a satisfactory prediction rate of 78.3%, compared to 69.2% obtained with the landslide susceptibility index method. The results indicate that the CF-AHP combined method is more appropriate for assessing the landslide susceptibility in this area.
基金supported by the National Natural Science Foundation of China(6160150161502521)
文摘To improve the inconsistency in the analytic hierarchy process(AHP), a new method based on marginal optimization theory is proposed. During the improving process, this paper regards the reduction of consistency ratio(CR) as benefit, and the maximum modification compared to the original pairwise comparison matrix(PCM) as cost, then the improvement of consistency is transformed to a benefit/cost analysis problem. According to the maximal marginal effect principle, the elements of PCM are modified by a fixed increment(or decrement) step by step till the consistency ratio becomes acceptable, which can ensure minimum adjustment to the original PCM so that the decision makers’ judgment is preserved as much as possible. The correctness of the proposed method is proved mathematically by theorem. Firstly, the marginal benefit/cost ratio is calculated for each single element of the PCM when it has been modified by a fixed increment(or decrement).Then, modification to the element with the maximum marginal benefit/cost ratio is accepted. Next, the marginal benefit/cost ratio is calculated again upon the revised matrix, and followed by choosing the modification to the element with the maximum marginal benefit/cost ratio. The process of calculating marginal effect and choosing the best modified element is repeated for each revised matrix till acceptable consistency is reached, i.e., CR<0.1. Finally,illustrative examples show the proposed method is more effective and better in preserving the original comparison information than existing methods.
