Objective To observe the clinical effect of acupuncture at Neiguan （内关 PC 6） in combination with respiratory reinforcing and reducing method for treatment of cardiac neurosis. Methods Thirty-eight patients with ca...Objective To observe the clinical effect of acupuncture at Neiguan （内关 PC 6） in combination with respiratory reinforcing and reducing method for treatment of cardiac neurosis. Methods Thirty-eight patients with cardiac neurosis were selected for treatment through acupuncture at PC 6 in combination with respiratory reinforcing and reducing method. With twice per day, treated for 6 days per week, and 4 weeks as one course, the therapeutic effect was assessed after one course. Results Twenty-one cases were cured, 15 cases were remarkably improved, and 2 cases were failed. The total effective rate was 94.7%. Conclusion Acupuncture at PC 6 in combination with respiratory reinforcing and reducing method is effective in treatment of cardiac neurosis.展开更多
In this study,a high-throughput screening method was established through the 24-square deep-well microliter plate(MTP) fermentation and micro-plate detection for large-scale screening of the mutants.It was suitable fo...In this study,a high-throughput screening method was established through the 24-square deep-well microliter plate(MTP) fermentation and micro-plate detection for large-scale screening of the mutants.It was suitable for screening a large number of mutants and improving the breeding efficiency after heavy-ion beam irradiation.Seventeen strains showed higher cellulase activity compared with the initial strain after the screening of plate and MTP fermentation.The filter paper activity and β-glucosidase activity of Aspergillus niger H11201 had increased 38.74 and 63.23%separately compared with A.niger H11 by shaking flask fermentation,and it was genetically stable after being passaged to nine generations.The results indicate that the high-throughput screening method can be used for the quick breeding of A.niger with high cellulase activity.展开更多
The structure parameters of 6-degree of freedom(DOF)vibration isolation platform have a significant effect on its performance.To make the designed vibration isolation platform perform well,non-dominanted sorting genet...The structure parameters of 6-degree of freedom(DOF)vibration isolation platform have a significant effect on its performance.To make the designed vibration isolation platform perform well,non-dominanted sorting genetic algorithm version II(NSGA-II)was applied to optimize its structure based on the transfer matrix method for multibody systems.Firstly,the Jacobian matrix of 6-DOF vibration isolation platform was solved based on kinematics.Secondly,the transfer equation of 6-DOF vibration isolation system was established by the linear transfer matrix method for multibody systems.And the formula of its natural frequency was derived according to the boundary conditions of the system.Thirdly,the manipulability index was constructed based on a dimensionless Jacobian matrix.And a new performance index function was established considering the influence of dynamic isotropic and legs mass.Fourthly,genetic algorithm(GA)and NSGA-II were used to optimize the structure of the 6-DOF vibration isolation platform under the same conditions,respectively.It showed that NSGA-II had higher optimization efficiency,better calculation accuracy and shorter optimization time than that of GA.Finally,NSGA-II was adopted for multi-objective optimization design of 6-DOF vibration isolation platform based on the constraint conditions.Optimal Pareto solutions were obtained,which provides structural parameters for subsequent design work.Therefore,the proposed optimization method and the performance index in this paper provide a theoretical basis for the optimal design of relevant vibration isolation mechanism.展开更多
Ti6Al4V substrates were anodized in a 0.5 mol/L H_2SO_4 solution at applied voltages of 90-140 V.A hydroxyapatite-titanium oxide（HA-TiO2）coating was then deposited on the anodized Ti6Al4 V substrates via a hydrother...Ti6Al4V substrates were anodized in a 0.5 mol/L H_2SO_4 solution at applied voltages of 90-140 V.A hydroxyapatite-titanium oxide（HA-TiO2）coating was then deposited on the anodized Ti6Al4 V substrates via a hydrothermal-electrochemicalmethod at a constant current.The obtained films and coatings were characterized by X-ray diffraction,scanning electron microscopy,energy-dispersive X-ray spectroscopy,and Fourier-transform infrared spectrometry.The microstructures of the porous films on the Ti6Al4 V substrates were studied to investigate the effect of the anodizing voltage on the phase and morphology of the HATiO_2 coating.The results indicated that both the phase composition and the morphology of the coatings were significantly influenced by changes in the anodizing voltage.HA-TiO_2 was directly precipitated onto the surface of the substrate when the applied voltage was between 110 and 140 V.The coatings had a gradient structure and the HA exhibited both needle-like and cotton-like structures.The amount of cotton-like HA structures decreased with an increase in voltage from 90 to 120 V,and then increased slightly when the voltage was higher than 120 V.The orientation index of the（002）plane of the coating was at a minimum when the Ti6Al4 V substrate was pretreated at 120 V.展开更多
In this work, ZnSn（OH）6with a cubic structure is successfully synthesized by one-step hydrothermal method without any catalyst. The response and recovery characteristics of gas sensing were investigated against vari...In this work, ZnSn（OH）6with a cubic structure is successfully synthesized by one-step hydrothermal method without any catalyst. The response and recovery characteristics of gas sensing were investigated against various gases via quartz crystal microbalance（QCM） at room temperature. The sensor exhibited high sensitivity and good selectivity toward CO gas. Moreover, a linear dependence of log^（àDelta F）about CO concentration was obtained. It is demonstrated that the QCM sensor coated cubic ZnSn（OH）6could be a suitable candidate for detecting CO.展开更多
Pr0.6-x NdxCa0.4 FeO3-δ （ x = 0.0, 0.2, 0.3, 0.4, 0.5, 0.6） were synthesized using Pechini method. A number of studies were conducted concerning composition, specific area, crystalline structure and microstructure ...Pr0.6-x NdxCa0.4 FeO3-δ （ x = 0.0, 0.2, 0.3, 0.4, 0.5, 0.6） were synthesized using Pechini method. A number of studies were conducted concerning composition, specific area, crystalline structure and microstructure of the samples by means of FT-IR, BET, XRD TG-DTA and SEM. The results show that all the samples with different doping amounts of Pr^3＋ and Nd^3＋ on A-site are fine dispersed, and mean particle size less than 100 nm. The powders have good sinterability, and the relative density is 95% after sintered at 1200 ℃ for 2 h. It is found that all specimens are entirely single phase solid solutions with orthorhombic perovskite structure, the stable perovskitetype phase is formed completely after calcination at 900 ℃.展开更多
Through the long time track examination and disintegration to SF6 circuit breaker, we obtain the massive monitor data and massive pictures. The criteria of resuming insulation discharge failure conforming to CSO2/CH2S...Through the long time track examination and disintegration to SF6 circuit breaker, we obtain the massive monitor data and massive pictures. The criteria of resuming insulation discharge failure conforming to CSO2/CH2S>7, is quite broad to SO2 and the H2S concentration permission. Even if it reaches 100μL/L, it will not be in danger immediately to the safe operation of equipment. We may plan, arrange, and overhaul calmly. When obtaining the bare conductor overheating failure, it has not involved the resuming insulation. We may use the resuming insulation discharge failure criterion.展开更多
In this letter, the φ^6 ＋ φ^5 model in （D ＋ 1） dimensions can be solved by a truncated series method. A series of solitary solutions of the φ^6 ＋ φ^5 model in （D ＋ 1） dimensions have be obtained.
The methods of determination of 6-methyl coumarin in cosmetics by HPLC-DAD and GC-FID were compared. The positive samples were confirmed by GC-MS. Methanol was used to extract 6-methyl coumarin from cosmetics. The chr...The methods of determination of 6-methyl coumarin in cosmetics by HPLC-DAD and GC-FID were compared. The positive samples were confirmed by GC-MS. Methanol was used to extract 6-methyl coumarin from cosmetics. The chromatographic conditions of the two methods were optimized and the samples were determined. The recovery, precision, correlation coefficient, detection limit and quantitative limit of the two methods were compared. The results showed that the linear relationship between the two methods was good. The percentage recovery of standard addition by HPLC-DAD was 92.20%~102.80%, by RSD was 0.77%~2.00%;the detection limit was 0.05 mg/kg, the quantitative limit was 0.17 mg/kg. The percentage recovery of standard addition by GC-FID was 97.30%~103.28%, by RSD was 0.47%~4.87%;the detection limit was 1.3 mg/kg, the quantitative limit was 5.0 mg/kg. The detection limit by HPLC-DAD was lower and more sensitive than that by GC-FID , which also shows that HPLC-DAD has more advantages for the detection of low content samples.展开更多
In the presented study, the laser butt-welding of Ti 6Al 4V is investigated using 2.2 kw CO2 laser. Ti 6Al 4V alloy has widespread application in various fields of industries including the medical, nuclear and aerospa...In the presented study, the laser butt-welding of Ti 6Al 4V is investigated using 2.2 kw CO2 laser. Ti 6Al 4V alloy has widespread application in various fields of industries including the medical, nuclear and aerospace. In this study, Response Surface Methodology (RSM) is employed to establish the design of experiments and to optimize the bead geometry. The relationships between the input laser-welding parameters (i.e. laser power, welding speed and focal point position) and the process responses (i.e. welded zone width, heat affected zone width, welded zone area, heat affected zone area and penetration depth) are investigated. The multi-response optimizations are used to optimize the welding process. The optimum welding conditions are identified in order to increase the productivity and minimize the total operating cost. The validation results demonstrate that the developed models are accurate with low percentages of error (less than 12.5%).展开更多
Sr0.6 Ba0.4 Nb2 O6 micro-rods are prepared by the molten-salt method with K2 SO4,KCl-K2 SO4,and KCl as fluxes.It reveals that the Sr0.6 Ba0.4 Nb2 O6 synthesized with KCl as a flux exhibits a single phase with tetragon...Sr0.6 Ba0.4 Nb2 O6 micro-rods are prepared by the molten-salt method with K2 SO4,KCl-K2 SO4,and KCl as fluxes.It reveals that the Sr0.6 Ba0.4 Nb2 O6 synthesized with KCl as a flux exhibits a single phase with tetragonal tungsten bronze structure.The measurement of X-ray diffraction indicates that the Sr0.6 Ba0.4 Nb2 O6 micro-rods synthesized at 1 300℃are anisotropic.The morphology of the powers is examined by transmission electron microscope.It reveals that the length-diameter ratio of Sr0.6 Ba0.4 Nb2 O6 micro-rods increases with increasing annealing temperature from 900℃to 1 300℃.At 1 300℃,the rod possesses a large length-diameter ratio of 8∶1.Moreover,the analysis of the piezoelectric properties of single micro-rods using apiezo-response force microscope indicates that the domains of the material are arranged along its radial direction.展开更多
In order to solve the problems of too large mass,too complex structure and poor flexibility of the 6 DOF manipulator,the topological optimization theory based on variable density method is applied to the 6-DOF manipul...In order to solve the problems of too large mass,too complex structure and poor flexibility of the 6 DOF manipulator,the topological optimization theory based on variable density method is applied to the 6-DOF manipulator,the topology optimization of the main structural components of the manipulator is carried out with the help of the finite element software ANSYS,and the optimized structure is simplified according to the density distribution of the units and the requirements of manufacturability.the results are compared and analysed by static mechanics.It shows that the whole mass of the 6-DOF manipulator is reduced by 47.23%without changing the original mechanical properties after topological optimization,and the optimized model can meet the requirements of manufacturability,the optimization effect is signifcant,which can be used as a reference for the structure optimization of the 6-DOF manipulator.展开更多
文摘Objective To observe the clinical effect of acupuncture at Neiguan （内关 PC 6） in combination with respiratory reinforcing and reducing method for treatment of cardiac neurosis. Methods Thirty-eight patients with cardiac neurosis were selected for treatment through acupuncture at PC 6 in combination with respiratory reinforcing and reducing method. With twice per day, treated for 6 days per week, and 4 weeks as one course, the therapeutic effect was assessed after one course. Results Twenty-one cases were cured, 15 cases were remarkably improved, and 2 cases were failed. The total effective rate was 94.7%. Conclusion Acupuncture at PC 6 in combination with respiratory reinforcing and reducing method is effective in treatment of cardiac neurosis.
基金supported by the National Natural Science Foundation of China(No.11305225)the Science and Technology Service Network Initiative(KFJ-EW-STS-086)
文摘In this study,a high-throughput screening method was established through the 24-square deep-well microliter plate(MTP) fermentation and micro-plate detection for large-scale screening of the mutants.It was suitable for screening a large number of mutants and improving the breeding efficiency after heavy-ion beam irradiation.Seventeen strains showed higher cellulase activity compared with the initial strain after the screening of plate and MTP fermentation.The filter paper activity and β-glucosidase activity of Aspergillus niger H11201 had increased 38.74 and 63.23%separately compared with A.niger H11 by shaking flask fermentation,and it was genetically stable after being passaged to nine generations.The results indicate that the high-throughput screening method can be used for the quick breeding of A.niger with high cellulase activity.
基金supported by the National Natural Science Foundation of China(Grant 51975298)the Natural Science Foundation of Jiangsu Province(Grant BK20181301)the National Science Foundation of China(Grant 11874303).
文摘The structure parameters of 6-degree of freedom(DOF)vibration isolation platform have a significant effect on its performance.To make the designed vibration isolation platform perform well,non-dominanted sorting genetic algorithm version II(NSGA-II)was applied to optimize its structure based on the transfer matrix method for multibody systems.Firstly,the Jacobian matrix of 6-DOF vibration isolation platform was solved based on kinematics.Secondly,the transfer equation of 6-DOF vibration isolation system was established by the linear transfer matrix method for multibody systems.And the formula of its natural frequency was derived according to the boundary conditions of the system.Thirdly,the manipulability index was constructed based on a dimensionless Jacobian matrix.And a new performance index function was established considering the influence of dynamic isotropic and legs mass.Fourthly,genetic algorithm(GA)and NSGA-II were used to optimize the structure of the 6-DOF vibration isolation platform under the same conditions,respectively.It showed that NSGA-II had higher optimization efficiency,better calculation accuracy and shorter optimization time than that of GA.Finally,NSGA-II was adopted for multi-objective optimization design of 6-DOF vibration isolation platform based on the constraint conditions.Optimal Pareto solutions were obtained,which provides structural parameters for subsequent design work.Therefore,the proposed optimization method and the performance index in this paper provide a theoretical basis for the optimal design of relevant vibration isolation mechanism.
基金Funded in part by the Key Laboratory of Inorginic Coating MaterialsChinese Academy of Sciences(No.KLICM-2014-11)the Shanghai Municipal Natural Science Foundation Sponsored by Shanghai Municipal Science and Technology Commissions(No.15ZR1428300)
文摘Ti6Al4V substrates were anodized in a 0.5 mol/L H_2SO_4 solution at applied voltages of 90-140 V.A hydroxyapatite-titanium oxide（HA-TiO2）coating was then deposited on the anodized Ti6Al4 V substrates via a hydrothermal-electrochemicalmethod at a constant current.The obtained films and coatings were characterized by X-ray diffraction,scanning electron microscopy,energy-dispersive X-ray spectroscopy,and Fourier-transform infrared spectrometry.The microstructures of the porous films on the Ti6Al4 V substrates were studied to investigate the effect of the anodizing voltage on the phase and morphology of the HATiO_2 coating.The results indicated that both the phase composition and the morphology of the coatings were significantly influenced by changes in the anodizing voltage.HA-TiO_2 was directly precipitated onto the surface of the substrate when the applied voltage was between 110 and 140 V.The coatings had a gradient structure and the HA exhibited both needle-like and cotton-like structures.The amount of cotton-like HA structures decreased with an increase in voltage from 90 to 120 V,and then increased slightly when the voltage was higher than 120 V.The orientation index of the（002）plane of the coating was at a minimum when the Ti6Al4 V substrate was pretreated at 120 V.
基金financially supported by the Key Project of Sichuan provincial Education office(No.13ZA0183)Applied Basic Research Programs of Sichuan Provincial Science and Technology Office(No.2014JY0059)+1 种基金Foundation of Youth Science and Technology Innovation Team of Sichuan Province(No.2015TD0007)Program for New Century Excellent Talents in University of Ministof Education of China(No.NCET-13-0983)
文摘In this work, ZnSn（OH）6with a cubic structure is successfully synthesized by one-step hydrothermal method without any catalyst. The response and recovery characteristics of gas sensing were investigated against various gases via quartz crystal microbalance（QCM） at room temperature. The sensor exhibited high sensitivity and good selectivity toward CO gas. Moreover, a linear dependence of log^（àDelta F）about CO concentration was obtained. It is demonstrated that the QCM sensor coated cubic ZnSn（OH）6could be a suitable candidate for detecting CO.
文摘Pr0.6-x NdxCa0.4 FeO3-δ （ x = 0.0, 0.2, 0.3, 0.4, 0.5, 0.6） were synthesized using Pechini method. A number of studies were conducted concerning composition, specific area, crystalline structure and microstructure of the samples by means of FT-IR, BET, XRD TG-DTA and SEM. The results show that all the samples with different doping amounts of Pr^3＋ and Nd^3＋ on A-site are fine dispersed, and mean particle size less than 100 nm. The powders have good sinterability, and the relative density is 95% after sintered at 1200 ℃ for 2 h. It is found that all specimens are entirely single phase solid solutions with orthorhombic perovskite structure, the stable perovskitetype phase is formed completely after calcination at 900 ℃.
文摘Through the long time track examination and disintegration to SF6 circuit breaker, we obtain the massive monitor data and massive pictures. The criteria of resuming insulation discharge failure conforming to CSO2/CH2S>7, is quite broad to SO2 and the H2S concentration permission. Even if it reaches 100μL/L, it will not be in danger immediately to the safe operation of equipment. We may plan, arrange, and overhaul calmly. When obtaining the bare conductor overheating failure, it has not involved the resuming insulation. We may use the resuming insulation discharge failure criterion.
基金The project supported by National Natural Science Foundation of China under Grant No. 10575026.Acknowledgments The author thanks Prof. S.Y. Lou for helpful discussions.
文摘In this letter, the φ^6 ＋ φ^5 model in （D ＋ 1） dimensions can be solved by a truncated series method. A series of solitary solutions of the φ^6 ＋ φ^5 model in （D ＋ 1） dimensions have be obtained.
文摘The methods of determination of 6-methyl coumarin in cosmetics by HPLC-DAD and GC-FID were compared. The positive samples were confirmed by GC-MS. Methanol was used to extract 6-methyl coumarin from cosmetics. The chromatographic conditions of the two methods were optimized and the samples were determined. The recovery, precision, correlation coefficient, detection limit and quantitative limit of the two methods were compared. The results showed that the linear relationship between the two methods was good. The percentage recovery of standard addition by HPLC-DAD was 92.20%~102.80%, by RSD was 0.77%~2.00%;the detection limit was 0.05 mg/kg, the quantitative limit was 0.17 mg/kg. The percentage recovery of standard addition by GC-FID was 97.30%~103.28%, by RSD was 0.47%~4.87%;the detection limit was 1.3 mg/kg, the quantitative limit was 5.0 mg/kg. The detection limit by HPLC-DAD was lower and more sensitive than that by GC-FID , which also shows that HPLC-DAD has more advantages for the detection of low content samples.
文摘In the presented study, the laser butt-welding of Ti 6Al 4V is investigated using 2.2 kw CO2 laser. Ti 6Al 4V alloy has widespread application in various fields of industries including the medical, nuclear and aerospace. In this study, Response Surface Methodology (RSM) is employed to establish the design of experiments and to optimize the bead geometry. The relationships between the input laser-welding parameters (i.e. laser power, welding speed and focal point position) and the process responses (i.e. welded zone width, heat affected zone width, welded zone area, heat affected zone area and penetration depth) are investigated. The multi-response optimizations are used to optimize the welding process. The optimum welding conditions are identified in order to increase the productivity and minimize the total operating cost. The validation results demonstrate that the developed models are accurate with low percentages of error (less than 12.5%).
基金supported by the National Natural Science Foundation of China(No.11475086)
文摘Sr0.6 Ba0.4 Nb2 O6 micro-rods are prepared by the molten-salt method with K2 SO4,KCl-K2 SO4,and KCl as fluxes.It reveals that the Sr0.6 Ba0.4 Nb2 O6 synthesized with KCl as a flux exhibits a single phase with tetragonal tungsten bronze structure.The measurement of X-ray diffraction indicates that the Sr0.6 Ba0.4 Nb2 O6 micro-rods synthesized at 1 300℃are anisotropic.The morphology of the powers is examined by transmission electron microscope.It reveals that the length-diameter ratio of Sr0.6 Ba0.4 Nb2 O6 micro-rods increases with increasing annealing temperature from 900℃to 1 300℃.At 1 300℃,the rod possesses a large length-diameter ratio of 8∶1.Moreover,the analysis of the piezoelectric properties of single micro-rods using apiezo-response force microscope indicates that the domains of the material are arranged along its radial direction.
基金supported in part by China intelligent robot project of firm-universities cooperative R&D under Grant No.2021JQR021the Anhui Provincial Teaching Demonstration Course Project under Grant No.2020SJJXSFK0330+9 种基金the demonstration experiment training center project of Anhui Polytechnic University under Grant No.2020sysx02the Overseas Visiting and Research Project for Outstanding Young Backbone Talents in Universities of Anhui Province under Grant No.gxgwfx2019041the Innovation Project for Returned Overseas Students in Anhui Province under Grant No.2020LCX013Key Research and Development Projects of Anhui Province under Grant No.202004b11020006Scientific Research Foundation of Anhui Polytechnic University under Grant No.2020YQQ010Anhui Polytechnic University Research Initiation Fund for Introducing Talents under Grant No.2019YQQ004Anhui Polytechnic University Research Project under Grant No.Xjky019201905Industrial Collaborative Innovation Fund of Anhui Polytechnic University and Jiujiang District under Grant No.2021cyxtb9Open Project of Anhui Provincial Engineering Laboratory on Information Fusion and Control of Intelligent Robot under Grant No.IFCIR2020001Open project of Key Laboratory of industrial equipment quality big data Ministry of industry and information technology under Grant No.2021-IEQBD-05.
文摘In order to solve the problems of too large mass,too complex structure and poor flexibility of the 6 DOF manipulator,the topological optimization theory based on variable density method is applied to the 6-DOF manipulator,the topology optimization of the main structural components of the manipulator is carried out with the help of the finite element software ANSYS,and the optimized structure is simplified according to the density distribution of the units and the requirements of manufacturability.the results are compared and analysed by static mechanics.It shows that the whole mass of the 6-DOF manipulator is reduced by 47.23%without changing the original mechanical properties after topological optimization,and the optimized model can meet the requirements of manufacturability,the optimization effect is signifcant,which can be used as a reference for the structure optimization of the 6-DOF manipulator.
