Arctic sea ice is an important component of the global climate system and has experienced rapid changes during in the past few decades,the prediction of which is a significant application for climate models.In this st...Arctic sea ice is an important component of the global climate system and has experienced rapid changes during in the past few decades,the prediction of which is a significant application for climate models.In this study,a Localized Error Subspace Transform Kalman Filter is employed in a coupled climate system model(the Flexible Global Ocean–Atmosphere–Land System Model,version f3-L(FGOALS-f3-L))to assimilate sea-ice concentration(SIC)and sea-ice thickness(SIT)data for melting-season ice predictions.The scheme is applied through the following steps:(1)initialization for generating initial ensembles;(2)analysis for assimilating observed data;(3)adoption for dividing ice states into five thickness categories;(4)forecast for evolving the model;(5)resampling for updating model uncertainties.Several experiments were conducted to examine its results and impacts.Compared with the control experiment,the continuous assimilation experiments(CTNs)indicate assimilations improve model SICs and SITs persistently and generate realistic initials.Assimilating SIC+SIT data better corrects overestimated model SITs spatially than when only assimilating SIC data.The continuous assimilation restart experiments indicate the initials from the CTNs correct the overestimated marginal SICs and overall SITs remarkably well,as well as the cold biases in the oceanic and atmospheric models.The initials with SIC+SIT assimilated show more reasonable spatial improvements.Nevertheless,the SICs in the central Arctic undergo abnormal summer reductions,which is probably because overestimated SITs are reduced in the initials but the strong seasonal cycle(summer melting)biases are unchanged.Therefore,since systematic biases are complicated in a coupled system,for FGOALS-f3-L to make better ice predictions,oceanic and atmospheric assimilations are expected required.展开更多
The research work has been seldom done about cloverleaf junction expression in a 3-dimensional city model (3DCM). The main reason is that the cloverleaf junction is often in a complex and enormous construction. Its ma...The research work has been seldom done about cloverleaf junction expression in a 3-dimensional city model (3DCM). The main reason is that the cloverleaf junction is often in a complex and enormous construction. Its main body is bestraddle in air,and has aerial intersections between its parts. This complex feature made cloverleaf junction quite different from buildings and terrain, therefore, it is difficult to express this kind of spatial objects in the same way as for buildings and terrain. In this paper,authors analyze spatial characteristics of cloverleaf junction, propose an all-constraint points TIN algorithm to partition cloverleaf junction road surface, and develop a method to visualize cloverleaf junction road surface using TIN. In order to manage cloverleaf junction data efficiently, the authors also analyzed the mechanism of 3DCM data management, extended BLOB type in relational database, and combined R-tree index to manage 3D spatial data. Based on this extension, an appropriate data展开更多
The three-member historical simulations by the Chinese Academy of Sciences Flexible Global Ocean–Atmosphere–Land System model,version f3-L(CAS FGOALS-f3-L),which is contributing to phase 6 of the Coupled Model Inter...The three-member historical simulations by the Chinese Academy of Sciences Flexible Global Ocean–Atmosphere–Land System model,version f3-L(CAS FGOALS-f3-L),which is contributing to phase 6 of the Coupled Model Intercomparison Project(CMIP6),are described in this study.The details of the CAS FGOALS-f3-L model,experiment settings and output datasets are briefly introduced.The datasets include monthly and daily outputs from the atmospheric,oceanic,land and sea-ice component models of CAS FGOALS-f3-L,and all these data have been published online in the Earth System Grid Federation(ESGF,https://esgf-node.llnl.gov/projects/cmip6/).The three ensembles are initialized from the 600th,650th and 700th model year of the preindustrial experiment(piControl)and forced by the same historical forcing provided by CMIP6 from 1850 to 2014.The performance of the coupled model is validated in comparison with some recent observed atmospheric and oceanic datasets.It is shown that CAS FGOALS-f3-L is able to reproduce the main features of the modern climate,including the climatology of air surface temperature and precipitation,the long-term changes in global mean surface air temperature,ocean heat content and sea surface steric height,and the horizontal and vertical distribution of temperature in the ocean and atmosphere.Meanwhile,like other state-of-the-art coupled GCMs,there are still some obvious biases in the historical simulations,which are also illustrated.This paper can help users to better understand the advantages and biases of the model and the datasets。展开更多
Due to the complex nature of multi-source geological data, it is difficult to rebuild every geological structure through a single 3D modeling method. The multi-source data interpretation method put forward in this ana...Due to the complex nature of multi-source geological data, it is difficult to rebuild every geological structure through a single 3D modeling method. The multi-source data interpretation method put forward in this analysis is based on a database-driven pattern and focuses on the discrete and irregular features of geological data. The geological data from a variety of sources covering a range of accuracy, resolution, quantity and quality are classified and integrated according to their reliability and consistency for 3D modeling. The new interpolation-approximation fitting construction algorithm of geological surfaces with the non-uniform rational B-spline(NURBS) technique is then presented. The NURBS technique can retain the balance among the requirements for accuracy, surface continuity and data storage of geological structures. Finally, four alternative 3D modeling approaches are demonstrated with reference to some examples, which are selected according to the data quantity and accuracy specification. The proposed approaches offer flexible modeling patterns for different practical engineering demands.展开更多
Following the High-Resolution Model Intercomparison Project(HighResMIP)Tier 2 protocol under the Coupled Model Intercomparison Project Phase 6(CMIP6),three numerical experiments are conducted with the Chinese Academy ...Following the High-Resolution Model Intercomparison Project(HighResMIP)Tier 2 protocol under the Coupled Model Intercomparison Project Phase 6(CMIP6),three numerical experiments are conducted with the Chinese Academy of Sciences Flexible Global Ocean-Atmosphere-Land System Model,version f3-H(CAS FGOALS-f3-H),and a 101-year(1950–2050)global high-resolution simulation dataset is presented in this study.The basic configuration of the FGOALSf3-H model and numerical experiments design are briefly described,and then the historical simulation is validated.Forced by observed radiative agents from 1950 to 2014,the coupled model essentially reproduces the observed long-term trends of temperature,precipitation,and sea ice extent,as well as the large-scale pattern of temperature and precipitation.With an approximate 0.25°horizontal resolution in the atmosphere and 0.1°in the ocean,the coupled models also simulate energetic western boundary currents and the Antarctic Circulation Current(ACC),reasonable characteristics of extreme precipitation,and realistic frontal scale air-sea interaction.The dataset and supporting detailed information have been published in the Earth System Grid Federation.展开更多
A new gravity survey was carried out in the northern part of the onshore Kribi- Campo sub-basin in Cameroon. The data were incorporated to the existing ones and then analyzed and modeled in order to elucidate the subs...A new gravity survey was carried out in the northern part of the onshore Kribi- Campo sub-basin in Cameroon. The data were incorporated to the existing ones and then analyzed and modeled in order to elucidate the subsurface structure of the area. The area is characterized in its north-western part by considerably high positive anomalies indicative of the presence of a dense intrusive body. We find, 1) from the analysis of the gravity residual anomaly map, the high positive anomalies observed are the signature of a shallow dense structure;2) from the multi-scale analysis of the maxima of the horizontal gradient, the structure is confined between depths of 0.5 km and 5 km;3) from the quantitative interpretation of residual anomalies by spectral analysis, the depth to the upper surface of the intrusive body is not uniform, the average depth of the bottom is h1 = 3.6 km and the depths to particular sections of the roof of the intrusion are h2 = 1.6 km and h3 = 0.5 km;4) and the 3D modeling gives results that are suggestive of the presence of contacts between rocks of different densities at different depths and a dense intrusive igneous body in the upper crust of the Kribi zone. From the 3D model the dense intrusive igneous block is surrounded by sedimentary formations to the south-west and metamorphic formations to the north-east. Both formations have a density of about 2.74 g/cm3. The near surface portions of this igneous block lie at a depth range of 0.5 km to 1.5 km while its lower surface has a depth range of 3.6 km to 5.2 km. The shape of the edges and the bottom of the intrusive body are suggestive of the fact that it forms part of a broader structure underlying the Kribi-Campo sub-basin with a great influence on the sedimentary cover.展开更多
Control signaling is mandatory for the operation and management of all types of communication networks,including the Third Generation Partnership Project(3GPP)mobile broadband networks.However,they consume important a...Control signaling is mandatory for the operation and management of all types of communication networks,including the Third Generation Partnership Project(3GPP)mobile broadband networks.However,they consume important and scarce network resources such as bandwidth and processing power.There have been several reports of these control signaling turning into signaling storms halting network operations and causing the respective Telecom companies big financial losses.This paper draws its motivation from such real network disaster incidents attributed to signaling storms.In this paper,we present a thorough survey of the causes,of the signaling storm problems in 3GPP-based mobile broadband networks and discuss in detail their possible solutions and countermeasures.We provide relevant analytical models to help quantify the effect of the potential causes and benefits of their corresponding solutions.Another important contribution of this paper is the comparison of the possible causes and solutions/countermeasures,concerning their effect on several important network aspects such as architecture,additional signaling,fidelity,etc.,in the form of a table.This paper presents an update and an extension of our earlier conference publication.To our knowledge,no similar survey study exists on the subject.展开更多
The development of 3D geological models involves the integration of large amounts of geological data,as well as additional accessible proprietary lithological,structural,geochemical,geophysical,and borehole data.Luanc...The development of 3D geological models involves the integration of large amounts of geological data,as well as additional accessible proprietary lithological,structural,geochemical,geophysical,and borehole data.Luanchuan,the case study area,southwestern Henan Province,is an important molybdenum-tungsten-lead-zinc polymetallic belt in China.展开更多
Understanding the behavior of urban air pollution is important en route for sustainable urban development (SUD). Malaysia is on its mission to be a developed country by year 2020 comprehends dealing with air pollution...Understanding the behavior of urban air pollution is important en route for sustainable urban development (SUD). Malaysia is on its mission to be a developed country by year 2020 comprehends dealing with air pollution is one of the indicators headed towards it. At present monitoring and managing air pollution in urban areas encompasses sophisticated air quality modeling and data acquisition. However, rapid developments in major cities cause difficulties in acquiring the city geometries. The existing method in acquiring city geometries data via ground or space measurement inspection such as field survey, photogrammetry, laser scanning, remote sensing or using architectural plans appears not to be practical because of its cost and efforts. Moreover, air monitoring stations deployed are intended for regional to global scale model whereby it is not accurate for urban areas with typical resolution of less than 2 km. Furthermore in urban areas, the pollutant dispersion movements are trapped between buildings initiating it to move vertically causing visualization complications which imply the limitations of existing visualization scheme that is based on two-dimensional (2D) framework. Therefore this paper aims is to perform groundwork assessment and discuss on the current scenario in Malaysia in the aspect of current policies towards SUD, air quality monitoring stations, scale model and detail discussion on air pollution dispersion model used called the Operational Street Pollution Model (OSPM). This research proposed the implementation of three-dimensional (3D) spatial city model as a new physical data input for OSPM. The five Level of Details (LOD) of 3D spatial city model shows the scale applicability for the dispersion model implementtation. Subsequently 3D spatial city model data commonly available on the web, by having a unified data model shows the advantages in easy data acquisition, 3D visualization of air pollution dispersion and improves visual analysis of air quality monitoring in urban areas.展开更多
The datasets for the tier-1 Scenario Model Intercomparison Project(ScenarioMIP)experiments from the Chinese Academy of Sciences(CAS)Flexible Global Ocean-Atmosphere-Land System model,finite-volume version 3(CAS FGOALS...The datasets for the tier-1 Scenario Model Intercomparison Project(ScenarioMIP)experiments from the Chinese Academy of Sciences(CAS)Flexible Global Ocean-Atmosphere-Land System model,finite-volume version 3(CAS FGOALS-f3-L)are described in this study.ScenarioMIP is one of the core MIP experiments in phase 6 of the Coupled Model Intercomparison Project(CMIP6).Considering future CO2,CH4,N2O and other gases’concentrations,as well as land use,the design of ScenarioMIP involves eight pathways,including two tiers(tier-1 and tier-2)of priority.Tier-1 includes four combined Shared Socioeconomic Pathways(SSPs)with radiative forcing,i.e.,SSP1-2.6,SSP2-4.5,SSP3-7.0 and SSP5-8.5,in which the globally averaged radiative forcing at the top of the atmosphere around the year 2100 is approximately 2.6,4.5,7.0 and 8.5 W m−2,respectively.This study provides an introduction to the ScenarioMIP datasets of this model,such as their storage location,sizes,variables,etc.Preliminary analysis indicates that surface air temperatures will increase by about 1.89℃,3.07℃,4.06℃ and 5.17℃ by around 2100 under these four scenarios,respectively.Meanwhile,some other key climate variables,such as sea-ice extension,precipitation,heat content,and sea level rise,also show significant long-term trends associated with the radiative forcing increases.These datasets will help us understand how the climate will change under different anthropogenic and radiative forcings.展开更多
This paper describes an automatic system for 3D big data of face modeling using front and side view images taken by an ordinary digital camera, whose directions are orthogonal. The paper consists of four keys in 3D vi...This paper describes an automatic system for 3D big data of face modeling using front and side view images taken by an ordinary digital camera, whose directions are orthogonal. The paper consists of four keys in 3D visualization. Firstly we study the 3D big data of face modeling including feature facial extraction from 2D images. The second part is to represent the technical from Computer Vision, Image Processing and my new method for extract information from images and create 3D model. Thirdly, 3D face modeling based on 2D image software is implemented by C# language, EMGU CV library and XNA framework. Finally, we design experiment, test and record results for measure performance of our method.展开更多
In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit so...In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit software to extract geometric information about the indoor environment.Furthermore,we proposed a method for constructing indoor elements based on parametric components.The research outcomes of this paper will offer new methods and tools for indoor space modeling and design.The approach of indoor space modeling based on 3D laser point cloud data and parametric component construction can enhance modeling efficiency and accuracy,providing architects,interior designers,and decorators with a better working platform and design reference.展开更多
Recent monitoring techniques employ multiple sources of information for the characterization of the phenomenon to be studied, being the coupling and adjustment of multi-source data one of the first challenges to consi...Recent monitoring techniques employ multiple sources of information for the characterization of the phenomenon to be studied, being the coupling and adjustment of multi-source data one of the first challenges to consider and solve. The authors propose a new framework of the multi-source and multi-temporal data-oriented fusion for the characterization of landslide events. The main objective is to generate 3D virtual models(in the form of dense point clouds) and feed them back with the characteristic of soil and subsoil information. The scheme consists of three main steps. The first one is on-site data collection(geological characterization, geophysical measurements, GPS measurements, and UAV/drone mapping). The second step is generation of a high-resolution 3D virtual model(~1-inch spatial resolution) from the frames acquired through the UAV using the structure of motion(SfM) processing;the developed virtual model is optimized with GPS measurements to minimize geolocation error and eliminate distortions. The last step is assembling of the acquired data in the field and densified point cloud considering the different nature of the data, re-escalating procedure and the information stacking layer.展开更多
The current GIS can only deal with 2-D or 2.5-D information on the earth surface. A new 3-D data structure and data model need to be designed for the 3-D GIS. This paper analyzes diverse 3-D spatial phenomena from min...The current GIS can only deal with 2-D or 2.5-D information on the earth surface. A new 3-D data structure and data model need to be designed for the 3-D GIS. This paper analyzes diverse 3-D spatial phenomena from mine to geology and their complicated relations, and proposes several new kinds of spatial objects including cross-section, column body and digital surface model to represent some special spatial phenomena like tunnels and irregular surfaces of an ore body. An integrated data structure including vector, raster and object-oriented data models is used to represent various 3-D spatial objects and their relations. The integrated data structure and object-oriented data model can be used as bases to design and realize a 3-D geographic information system.展开更多
On the study of the basic characteristics of geological objects and the special requirement for computing 3D geological model, this paper gives an object-oriented 3D topologic data model. In this model, the geological...On the study of the basic characteristics of geological objects and the special requirement for computing 3D geological model, this paper gives an object-oriented 3D topologic data model. In this model, the geological objects are divided into four object classes: point, line, area and volume. The volume class is further divided into four subclasses: the composite volume, the complex volume, the simple volume and the component. Twelve kinds of topological relations and the related data structures are designed for the geological objects.展开更多
3D geological modeling, one of the most important applications in geosciences of 3D GIS, forms the basis and is a prerequisite for visualized representation and analysis of 3D geological data. Computer modeling of geo...3D geological modeling, one of the most important applications in geosciences of 3D GIS, forms the basis and is a prerequisite for visualized representation and analysis of 3D geological data. Computer modeling of geological faults in 3D is currently a topical research area. Structural modeling techniques of complex geological entities contain- ing reverse faults are discussed and a series of approaches are proposed. The geological concepts involved in computer modeling and visualization of geological fault in 3D are explained, the type of data of geological faults based on geo- logical exploration is analyzed, and a normative database format for geological faults is designed. Two kinds of model- ing approaches for faults are compared: a modeling technique of faults based on stratum recovery and a modeling tech- nique of faults based on interpolation in subareas. A novel approach, called the Unified Modeling Technique for stratum and fault, is presented to solve the puzzling problems of reverse faults, syn-sedimentary faults and faults terminated within geological models. A case study of a fault model of bed rock in the Beijing Olympic Green District is presented in order to show the practical result of this method. The principle and the process of computer modeling of geological faults in 3D are discussed and a series of applied technical proposals established. It strengthens our profound compre- hension of geological phenomena and the modeling approach, and establishes the basic techniques of 3D geological modeling for practical applications in the field of geosciences.展开更多
The Zhuxi tungsten deposit in Jiangxi Province,South China,contains a total W reserve of about 2.86 Mt at an average grade of 0.54 wt%WO3,representing the largest W deposit in the world.Numerous studies on the metallo...The Zhuxi tungsten deposit in Jiangxi Province,South China,contains a total W reserve of about 2.86 Mt at an average grade of 0.54 wt%WO3,representing the largest W deposit in the world.Numerous studies on the metallogeny of the deposit have included its timing,the ore-controlling structures and sedimentary host rocks and their implications for mineral exploration.However,the deep nappe structural style of Taqian-Fuchun metallogenic belt that hosts the W deposit,and the spatial shape and scale of deeply concealed intrusions and their sedimentary host rocks are still poorly defined,which seriously restricts the discovery of new deposits at depth and in surrounding areas of the W deposit.Modern 3 D geological modeling is an important tool for the exploration of concealed orebodies,especially in brownfield environments.There are obvious density contrast and weak magnetic contrast in the ore-controlling strata and granite at the periphery of the deposit,which lays a physical foundation for solving the 3 D spatial problems of the ore-controlling geological body in the deep part of the study area through gravity and magnetic modeling.Gravity data(1:50000)and aeromagnetic data(1:50000)from the latest geophysical surveys of 2016-2018 have been used,firstly,to carry out a potential field separation to obtain residual anomalies for gravity and magnetic interactive inversion.Then,on the basis of the analysis of the relationship between physical properties and lithology,under the constraints of surface geology and borehole data,human-computer interactive gravity and magnetic inversion for 18 cross-sections were completed.Finally,the 3 D geological model of the Zhuxi tungsten deposit and its periphery have been established through these 18 sections,and the spatial shape of the intrusions and strata with a depth of 5 km underground were obtained,initially realizing―transparency‖for ore-controlling bodies.According the analysis of the geophysical,geochemical,and geological characteristics of the Zhuxi tungsten deposit,we discern three principles for prospecting and prediction in the research area,and propose five new exploration targets in its periphery.展开更多
The method of building 3D model was discussed at first.Aiming at the feature of mine vacant place,a method to build the 3D vacant place model based on multi TIN(triangular irregular network)was put forward,and the dat...The method of building 3D model was discussed at first.Aiming at the feature of mine vacant place,a method to build the 3D vacant place model based on multi TIN(triangular irregular network)was put forward,and the data structure and visualization of vacant place were discussed.Then some crucial technologies of realizing function in 3D-GIS were proposed.In addition,the software about special 3D mapping and assaying was introduced.展开更多
With the development of drone technology and oblique photogrammetry technology, the acquisition of oblique photogrammetry models and basemap becomes more and more convenient and quickly. The increase in the number of ...With the development of drone technology and oblique photogrammetry technology, the acquisition of oblique photogrammetry models and basemap becomes more and more convenient and quickly. The increase in the number of basemap leads to excessively redundant basemap tiles requests in 3D GIS when loading oblique photogrammetry models, which slows down the system. Aiming at improving the speed of running system, this paper proposes a dynamic strategy for loading basemap tiles. Different from existing 3D GIS which loading oblique photogrammetry models and basemap tiles inde-pendently, this strategy dynamically loads basemap tiles depending on different height of view and the range of loaded oblique photogrammetry models. We achieve dynamic loading of basemap tiles by predetermining whether the basemap tiles will be covered by the oblique photogrammetry models. The experimental results show that this strategy can greatly reduce the num-ber of redundant requests from the client to the server while ensuring the user’s visual requirements for the oblique photogrammetric model.展开更多
基金jointly funded by the National Natural Science Foundation of China(NSFC)[grant number 42130608]the China Postdoctoral Science Foundation[grant number 2024M753169]。
文摘Arctic sea ice is an important component of the global climate system and has experienced rapid changes during in the past few decades,the prediction of which is a significant application for climate models.In this study,a Localized Error Subspace Transform Kalman Filter is employed in a coupled climate system model(the Flexible Global Ocean–Atmosphere–Land System Model,version f3-L(FGOALS-f3-L))to assimilate sea-ice concentration(SIC)and sea-ice thickness(SIT)data for melting-season ice predictions.The scheme is applied through the following steps:(1)initialization for generating initial ensembles;(2)analysis for assimilating observed data;(3)adoption for dividing ice states into five thickness categories;(4)forecast for evolving the model;(5)resampling for updating model uncertainties.Several experiments were conducted to examine its results and impacts.Compared with the control experiment,the continuous assimilation experiments(CTNs)indicate assimilations improve model SICs and SITs persistently and generate realistic initials.Assimilating SIC+SIT data better corrects overestimated model SITs spatially than when only assimilating SIC data.The continuous assimilation restart experiments indicate the initials from the CTNs correct the overestimated marginal SICs and overall SITs remarkably well,as well as the cold biases in the oceanic and atmospheric models.The initials with SIC+SIT assimilated show more reasonable spatial improvements.Nevertheless,the SICs in the central Arctic undergo abnormal summer reductions,which is probably because overestimated SITs are reduced in the initials but the strong seasonal cycle(summer melting)biases are unchanged.Therefore,since systematic biases are complicated in a coupled system,for FGOALS-f3-L to make better ice predictions,oceanic and atmospheric assimilations are expected required.
文摘The research work has been seldom done about cloverleaf junction expression in a 3-dimensional city model (3DCM). The main reason is that the cloverleaf junction is often in a complex and enormous construction. Its main body is bestraddle in air,and has aerial intersections between its parts. This complex feature made cloverleaf junction quite different from buildings and terrain, therefore, it is difficult to express this kind of spatial objects in the same way as for buildings and terrain. In this paper,authors analyze spatial characteristics of cloverleaf junction, propose an all-constraint points TIN algorithm to partition cloverleaf junction road surface, and develop a method to visualize cloverleaf junction road surface using TIN. In order to manage cloverleaf junction data efficiently, the authors also analyzed the mechanism of 3DCM data management, extended BLOB type in relational database, and combined R-tree index to manage 3D spatial data. Based on this extension, an appropriate data
基金This study is jointly supported by the Strategic Priority Research Program of Chinese Academy of Sciences(Grant Nos.XDA19060102 and XDB42010400)the Natural Science Foundation of China(Grant Nos.41530426,91958201 and 41931183).
文摘The three-member historical simulations by the Chinese Academy of Sciences Flexible Global Ocean–Atmosphere–Land System model,version f3-L(CAS FGOALS-f3-L),which is contributing to phase 6 of the Coupled Model Intercomparison Project(CMIP6),are described in this study.The details of the CAS FGOALS-f3-L model,experiment settings and output datasets are briefly introduced.The datasets include monthly and daily outputs from the atmospheric,oceanic,land and sea-ice component models of CAS FGOALS-f3-L,and all these data have been published online in the Earth System Grid Federation(ESGF,https://esgf-node.llnl.gov/projects/cmip6/).The three ensembles are initialized from the 600th,650th and 700th model year of the preindustrial experiment(piControl)and forced by the same historical forcing provided by CMIP6 from 1850 to 2014.The performance of the coupled model is validated in comparison with some recent observed atmospheric and oceanic datasets.It is shown that CAS FGOALS-f3-L is able to reproduce the main features of the modern climate,including the climatology of air surface temperature and precipitation,the long-term changes in global mean surface air temperature,ocean heat content and sea surface steric height,and the horizontal and vertical distribution of temperature in the ocean and atmosphere.Meanwhile,like other state-of-the-art coupled GCMs,there are still some obvious biases in the historical simulations,which are also illustrated.This paper can help users to better understand the advantages and biases of the model and the datasets。
基金Supported by the National Natural Science Foundation of China(No.51379006 and No.51009106)the Program for New Century Excellent Talents in University of Ministry of Education of China(No.NCET-12-0404)the National Basic Research Program of China("973"Program,No.2013CB035903)
文摘Due to the complex nature of multi-source geological data, it is difficult to rebuild every geological structure through a single 3D modeling method. The multi-source data interpretation method put forward in this analysis is based on a database-driven pattern and focuses on the discrete and irregular features of geological data. The geological data from a variety of sources covering a range of accuracy, resolution, quantity and quality are classified and integrated according to their reliability and consistency for 3D modeling. The new interpolation-approximation fitting construction algorithm of geological surfaces with the non-uniform rational B-spline(NURBS) technique is then presented. The NURBS technique can retain the balance among the requirements for accuracy, surface continuity and data storage of geological structures. Finally, four alternative 3D modeling approaches are demonstrated with reference to some examples, which are selected according to the data quantity and accuracy specification. The proposed approaches offer flexible modeling patterns for different practical engineering demands.
基金jointly supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant Nos.XDA19060102 and XDB42000000)National Natural Science Foundation of China(Grant Nos.91958201 and 42130608)+1 种基金the National Key Research and Development Program of China(Grant No.2020YFA0608800)supported by the National Key Scientific and Technological Infrastructure project“Earth System Numerical Simulation Facility”(EarthLab)。
文摘Following the High-Resolution Model Intercomparison Project(HighResMIP)Tier 2 protocol under the Coupled Model Intercomparison Project Phase 6(CMIP6),three numerical experiments are conducted with the Chinese Academy of Sciences Flexible Global Ocean-Atmosphere-Land System Model,version f3-H(CAS FGOALS-f3-H),and a 101-year(1950–2050)global high-resolution simulation dataset is presented in this study.The basic configuration of the FGOALSf3-H model and numerical experiments design are briefly described,and then the historical simulation is validated.Forced by observed radiative agents from 1950 to 2014,the coupled model essentially reproduces the observed long-term trends of temperature,precipitation,and sea ice extent,as well as the large-scale pattern of temperature and precipitation.With an approximate 0.25°horizontal resolution in the atmosphere and 0.1°in the ocean,the coupled models also simulate energetic western boundary currents and the Antarctic Circulation Current(ACC),reasonable characteristics of extreme precipitation,and realistic frontal scale air-sea interaction.The dataset and supporting detailed information have been published in the Earth System Grid Federation.
文摘A new gravity survey was carried out in the northern part of the onshore Kribi- Campo sub-basin in Cameroon. The data were incorporated to the existing ones and then analyzed and modeled in order to elucidate the subsurface structure of the area. The area is characterized in its north-western part by considerably high positive anomalies indicative of the presence of a dense intrusive body. We find, 1) from the analysis of the gravity residual anomaly map, the high positive anomalies observed are the signature of a shallow dense structure;2) from the multi-scale analysis of the maxima of the horizontal gradient, the structure is confined between depths of 0.5 km and 5 km;3) from the quantitative interpretation of residual anomalies by spectral analysis, the depth to the upper surface of the intrusive body is not uniform, the average depth of the bottom is h1 = 3.6 km and the depths to particular sections of the roof of the intrusion are h2 = 1.6 km and h3 = 0.5 km;4) and the 3D modeling gives results that are suggestive of the presence of contacts between rocks of different densities at different depths and a dense intrusive igneous body in the upper crust of the Kribi zone. From the 3D model the dense intrusive igneous block is surrounded by sedimentary formations to the south-west and metamorphic formations to the north-east. Both formations have a density of about 2.74 g/cm3. The near surface portions of this igneous block lie at a depth range of 0.5 km to 1.5 km while its lower surface has a depth range of 3.6 km to 5.2 km. The shape of the edges and the bottom of the intrusive body are suggestive of the fact that it forms part of a broader structure underlying the Kribi-Campo sub-basin with a great influence on the sedimentary cover.
基金the Deanship of Graduate Studies and Scientific Research at Qassim University for financial support(QU-APC-2024-9/1).
文摘Control signaling is mandatory for the operation and management of all types of communication networks,including the Third Generation Partnership Project(3GPP)mobile broadband networks.However,they consume important and scarce network resources such as bandwidth and processing power.There have been several reports of these control signaling turning into signaling storms halting network operations and causing the respective Telecom companies big financial losses.This paper draws its motivation from such real network disaster incidents attributed to signaling storms.In this paper,we present a thorough survey of the causes,of the signaling storm problems in 3GPP-based mobile broadband networks and discuss in detail their possible solutions and countermeasures.We provide relevant analytical models to help quantify the effect of the potential causes and benefits of their corresponding solutions.Another important contribution of this paper is the comparison of the possible causes and solutions/countermeasures,concerning their effect on several important network aspects such as architecture,additional signaling,fidelity,etc.,in the form of a table.This paper presents an update and an extension of our earlier conference publication.To our knowledge,no similar survey study exists on the subject.
文摘The development of 3D geological models involves the integration of large amounts of geological data,as well as additional accessible proprietary lithological,structural,geochemical,geophysical,and borehole data.Luanchuan,the case study area,southwestern Henan Province,is an important molybdenum-tungsten-lead-zinc polymetallic belt in China.
基金Major funding for this research was provided by the Ministry of Higher Education Malaysia and partially funded by the Land Surveyors Board of Malaysia.
文摘Understanding the behavior of urban air pollution is important en route for sustainable urban development (SUD). Malaysia is on its mission to be a developed country by year 2020 comprehends dealing with air pollution is one of the indicators headed towards it. At present monitoring and managing air pollution in urban areas encompasses sophisticated air quality modeling and data acquisition. However, rapid developments in major cities cause difficulties in acquiring the city geometries. The existing method in acquiring city geometries data via ground or space measurement inspection such as field survey, photogrammetry, laser scanning, remote sensing or using architectural plans appears not to be practical because of its cost and efforts. Moreover, air monitoring stations deployed are intended for regional to global scale model whereby it is not accurate for urban areas with typical resolution of less than 2 km. Furthermore in urban areas, the pollutant dispersion movements are trapped between buildings initiating it to move vertically causing visualization complications which imply the limitations of existing visualization scheme that is based on two-dimensional (2D) framework. Therefore this paper aims is to perform groundwork assessment and discuss on the current scenario in Malaysia in the aspect of current policies towards SUD, air quality monitoring stations, scale model and detail discussion on air pollution dispersion model used called the Operational Street Pollution Model (OSPM). This research proposed the implementation of three-dimensional (3D) spatial city model as a new physical data input for OSPM. The five Level of Details (LOD) of 3D spatial city model shows the scale applicability for the dispersion model implementtation. Subsequently 3D spatial city model data commonly available on the web, by having a unified data model shows the advantages in easy data acquisition, 3D visualization of air pollution dispersion and improves visual analysis of air quality monitoring in urban areas.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant Nos.XDA19060102 and XDB42000000)the National Natural Science Foundation of China(Grants Nos.41530426 and 91958201)。
文摘The datasets for the tier-1 Scenario Model Intercomparison Project(ScenarioMIP)experiments from the Chinese Academy of Sciences(CAS)Flexible Global Ocean-Atmosphere-Land System model,finite-volume version 3(CAS FGOALS-f3-L)are described in this study.ScenarioMIP is one of the core MIP experiments in phase 6 of the Coupled Model Intercomparison Project(CMIP6).Considering future CO2,CH4,N2O and other gases’concentrations,as well as land use,the design of ScenarioMIP involves eight pathways,including two tiers(tier-1 and tier-2)of priority.Tier-1 includes four combined Shared Socioeconomic Pathways(SSPs)with radiative forcing,i.e.,SSP1-2.6,SSP2-4.5,SSP3-7.0 and SSP5-8.5,in which the globally averaged radiative forcing at the top of the atmosphere around the year 2100 is approximately 2.6,4.5,7.0 and 8.5 W m−2,respectively.This study provides an introduction to the ScenarioMIP datasets of this model,such as their storage location,sizes,variables,etc.Preliminary analysis indicates that surface air temperatures will increase by about 1.89℃,3.07℃,4.06℃ and 5.17℃ by around 2100 under these four scenarios,respectively.Meanwhile,some other key climate variables,such as sea-ice extension,precipitation,heat content,and sea level rise,also show significant long-term trends associated with the radiative forcing increases.These datasets will help us understand how the climate will change under different anthropogenic and radiative forcings.
基金The paper is partly supported by: 1. The Fund of PHD Supervisor from China Institute Committee (20132304110018). 2. The Natural Fund of Hei Longjiang Province (F201246). 3. The National Natural Science Foundation of China under Grant (61272184).
文摘This paper describes an automatic system for 3D big data of face modeling using front and side view images taken by an ordinary digital camera, whose directions are orthogonal. The paper consists of four keys in 3D visualization. Firstly we study the 3D big data of face modeling including feature facial extraction from 2D images. The second part is to represent the technical from Computer Vision, Image Processing and my new method for extract information from images and create 3D model. Thirdly, 3D face modeling based on 2D image software is implemented by C# language, EMGU CV library and XNA framework. Finally, we design experiment, test and record results for measure performance of our method.
基金supported by the Innovation and Entrepreneurship Training Program Topic for College Students of North China University of Technology in 2023.
文摘In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit software to extract geometric information about the indoor environment.Furthermore,we proposed a method for constructing indoor elements based on parametric components.The research outcomes of this paper will offer new methods and tools for indoor space modeling and design.The approach of indoor space modeling based on 3D laser point cloud data and parametric component construction can enhance modeling efficiency and accuracy,providing architects,interior designers,and decorators with a better working platform and design reference.
基金supported by the CONACYT Academic Fellowship(No.308896)
文摘Recent monitoring techniques employ multiple sources of information for the characterization of the phenomenon to be studied, being the coupling and adjustment of multi-source data one of the first challenges to consider and solve. The authors propose a new framework of the multi-source and multi-temporal data-oriented fusion for the characterization of landslide events. The main objective is to generate 3D virtual models(in the form of dense point clouds) and feed them back with the characteristic of soil and subsoil information. The scheme consists of three main steps. The first one is on-site data collection(geological characterization, geophysical measurements, GPS measurements, and UAV/drone mapping). The second step is generation of a high-resolution 3D virtual model(~1-inch spatial resolution) from the frames acquired through the UAV using the structure of motion(SfM) processing;the developed virtual model is optimized with GPS measurements to minimize geolocation error and eliminate distortions. The last step is assembling of the acquired data in the field and densified point cloud considering the different nature of the data, re-escalating procedure and the information stacking layer.
基金Project supported by the National Natural Science Foundation of China (No.49871066)
文摘The current GIS can only deal with 2-D or 2.5-D information on the earth surface. A new 3-D data structure and data model need to be designed for the 3-D GIS. This paper analyzes diverse 3-D spatial phenomena from mine to geology and their complicated relations, and proposes several new kinds of spatial objects including cross-section, column body and digital surface model to represent some special spatial phenomena like tunnels and irregular surfaces of an ore body. An integrated data structure including vector, raster and object-oriented data models is used to represent various 3-D spatial objects and their relations. The integrated data structure and object-oriented data model can be used as bases to design and realize a 3-D geographic information system.
文摘On the study of the basic characteristics of geological objects and the special requirement for computing 3D geological model, this paper gives an object-oriented 3D topologic data model. In this model, the geological objects are divided into four object classes: point, line, area and volume. The volume class is further divided into four subclasses: the composite volume, the complex volume, the simple volume and the component. Twelve kinds of topological relations and the related data structures are designed for the geological objects.
基金Project 2001AA135170 supported by the National High-Tech Research and Development (863) Program of China and 06ZR14031 by the Natural ScienceFoundation of Shanghai Municipality
文摘3D geological modeling, one of the most important applications in geosciences of 3D GIS, forms the basis and is a prerequisite for visualized representation and analysis of 3D geological data. Computer modeling of geological faults in 3D is currently a topical research area. Structural modeling techniques of complex geological entities contain- ing reverse faults are discussed and a series of approaches are proposed. The geological concepts involved in computer modeling and visualization of geological fault in 3D are explained, the type of data of geological faults based on geo- logical exploration is analyzed, and a normative database format for geological faults is designed. Two kinds of model- ing approaches for faults are compared: a modeling technique of faults based on stratum recovery and a modeling tech- nique of faults based on interpolation in subareas. A novel approach, called the Unified Modeling Technique for stratum and fault, is presented to solve the puzzling problems of reverse faults, syn-sedimentary faults and faults terminated within geological models. A case study of a fault model of bed rock in the Beijing Olympic Green District is presented in order to show the practical result of this method. The principle and the process of computer modeling of geological faults in 3D are discussed and a series of applied technical proposals established. It strengthens our profound compre- hension of geological phenomena and the modeling approach, and establishes the basic techniques of 3D geological modeling for practical applications in the field of geosciences.
基金jointly supported by the National Key R&D Program of China(Grant No.2016YFC0600201)China Geological Survey project(Grant Nos.DD20190012,DD20160082)the National Natural Science Foundation of China(Grant Nos.92062108,41630320,41574133)。
文摘The Zhuxi tungsten deposit in Jiangxi Province,South China,contains a total W reserve of about 2.86 Mt at an average grade of 0.54 wt%WO3,representing the largest W deposit in the world.Numerous studies on the metallogeny of the deposit have included its timing,the ore-controlling structures and sedimentary host rocks and their implications for mineral exploration.However,the deep nappe structural style of Taqian-Fuchun metallogenic belt that hosts the W deposit,and the spatial shape and scale of deeply concealed intrusions and their sedimentary host rocks are still poorly defined,which seriously restricts the discovery of new deposits at depth and in surrounding areas of the W deposit.Modern 3 D geological modeling is an important tool for the exploration of concealed orebodies,especially in brownfield environments.There are obvious density contrast and weak magnetic contrast in the ore-controlling strata and granite at the periphery of the deposit,which lays a physical foundation for solving the 3 D spatial problems of the ore-controlling geological body in the deep part of the study area through gravity and magnetic modeling.Gravity data(1:50000)and aeromagnetic data(1:50000)from the latest geophysical surveys of 2016-2018 have been used,firstly,to carry out a potential field separation to obtain residual anomalies for gravity and magnetic interactive inversion.Then,on the basis of the analysis of the relationship between physical properties and lithology,under the constraints of surface geology and borehole data,human-computer interactive gravity and magnetic inversion for 18 cross-sections were completed.Finally,the 3 D geological model of the Zhuxi tungsten deposit and its periphery have been established through these 18 sections,and the spatial shape of the intrusions and strata with a depth of 5 km underground were obtained,initially realizing―transparency‖for ore-controlling bodies.According the analysis of the geophysical,geochemical,and geological characteristics of the Zhuxi tungsten deposit,we discern three principles for prospecting and prediction in the research area,and propose five new exploration targets in its periphery.
文摘The method of building 3D model was discussed at first.Aiming at the feature of mine vacant place,a method to build the 3D vacant place model based on multi TIN(triangular irregular network)was put forward,and the data structure and visualization of vacant place were discussed.Then some crucial technologies of realizing function in 3D-GIS were proposed.In addition,the software about special 3D mapping and assaying was introduced.
文摘With the development of drone technology and oblique photogrammetry technology, the acquisition of oblique photogrammetry models and basemap becomes more and more convenient and quickly. The increase in the number of basemap leads to excessively redundant basemap tiles requests in 3D GIS when loading oblique photogrammetry models, which slows down the system. Aiming at improving the speed of running system, this paper proposes a dynamic strategy for loading basemap tiles. Different from existing 3D GIS which loading oblique photogrammetry models and basemap tiles inde-pendently, this strategy dynamically loads basemap tiles depending on different height of view and the range of loaded oblique photogrammetry models. We achieve dynamic loading of basemap tiles by predetermining whether the basemap tiles will be covered by the oblique photogrammetry models. The experimental results show that this strategy can greatly reduce the num-ber of redundant requests from the client to the server while ensuring the user’s visual requirements for the oblique photogrammetric model.
