The introduction of path planning and visual navigation in vascular interventional surgery can provide an intuitive reference and guidance for doctors.In this study,based on the preprocessing results of vessel skeleto...The introduction of path planning and visual navigation in vascular interventional surgery can provide an intuitive reference and guidance for doctors.In this study,based on the preprocessing results of vessel skeleton extraction and stenosis diagnosis in X-ray coronary angiography images,clustering is used to determine the connectivity of the intersection points,and then the improved Dijkstra algorithm is used to automatically plan the surgical path.On this basis,the intermediate point is introduced to piecewise correct the path and improve the accuracy of the system.Finally,the epipolar constrained inverse projection transformation is used to reconstruct the coronary artery 3D model,and the optimal path is marked to achieve a multi-angle 3D visual navigation.Clinical experimental results show that compared with the traditional Dijkstra algorithm,the improved method can reduce the need for intermediate points,which improves computational efficiency,and the average error of manual calibration path is reduced to 4%of that before overall optimization.The results of 3D reconstruction and reprojection further qualitatively and quantitatively verify the effectiveness of the whole scheme.展开更多
●AIM:To determine the teaching effects of a real-time three dimensional(3D)visualization system in the operating room for early-stage phacoemulsification training.●METHODS:A total of 10 ophthalmology residents of th...●AIM:To determine the teaching effects of a real-time three dimensional(3D)visualization system in the operating room for early-stage phacoemulsification training.●METHODS:A total of 10 ophthalmology residents of the first-year postgraduate were included.All the residents were novices to cataract surgery.Real-time cataract surgical observations were performed using a custom-built 3D visualization system.The training lasted 4wk(32h)in all.A modified International Council of Ophthalmology’s Ophthalmology Surgical Competency Assessment Rubric(ICO-OSCAR)containing 4 specific steps of cataract surgery was applied.The self-assessment(self)and expert-assessment(expert)were performed through the microsurgical attempts in the wet lab for each participant.●RESULTS:Compared with pre-training assessments(self 3.2±0.8,expert 2.5±0.6),the overall mean scores of posttraining(self 5.2±0.4,expert 4.7±0.6)were significantly improved after real-time observation training of 3D visualization system(P<0.05).Scores of 4 surgical items were significantly improved both self and expert assessment after training(P<0.05).●CONCLUSION:The 3D observation training provides novice ophthalmic residents with a better understanding of intraocular microsurgical techniques.It is a useful tool to improve teaching efficiency of surgical education.展开更多
3D visualization is one of major problems in “Digital Mine” theory and its technological research field. Through the observation of 3D geological models, spatial structural information, connected with the informatio...3D visualization is one of major problems in “Digital Mine” theory and its technological research field. Through the observation of 3D geological models, spatial structural information, connected with the information of production management hidden in geological data, could be detected. In order to meet the requirement of more efficient coal exploration, a case study of geological characters of the Daliuta Coal Mine is presented in which 3D visual models of the ground surface and geologic bodies are established on the basis of data models and data structures of 3D geology modeling. The main conclusions of this study are as follows: (1) Through analysis and organization of spatial discrete data, the drillhole database is designed with the data of the Daliuta mine; the connections amomg drillhole data are real- ized and displayed in a 3D environment. (2) Combining real data of the Daliuta mine, drillhole visualization is realized in a 3D environment by using the CoalMiner system. (3) The ground surface modeling of the Daliuta coal mine adopted a surface-data model and a TIN data structure. (4) 3D models of coal seams and rock formations of the Daliuta mine are established, which provide a method for the simulation of complex surfaces of geologic bodies. In the end, the models are applied to the Daliuta coal mine and the result shows that better geological effects are obtained.展开更多
3D visualization technology is a new seismic interpretation technology that is completely different from traditional seismic data interpretation technologies. This method takes geologic bodies or any 3D region of inte...3D visualization technology is a new seismic interpretation technology that is completely different from traditional seismic data interpretation technologies. This method takes geologic bodies or any 3D region of interest as a unit and integrates the points, lines, and planes of the bodies to make a 3D visual interpretation. This technology can be integrated with the coherence technique to interpret complex faults. Spatial domain automatic horizon tracing can accurately determine structural features. Target sculpting can determine the spatial dimensions and depth extent of perspective 3D lithology bodies using inversion data. I applied this technology to the interpretation of the complex block structures in the Guanxi area of Dagang Oilfield and the prediction of subtle reservoirs in the western slope of the Qinan sag with good results. This study indicated that the visual interpretation technology can be widely and effectively applied in oil field development and to improve the exploration success ratio.展开更多
Visual arts refer to art experienced primarily through vision.3D visual optical art is one of them.Artists use their rich imagination and experience to combine light and objects to give viewers an unforgettable visual...Visual arts refer to art experienced primarily through vision.3D visual optical art is one of them.Artists use their rich imagination and experience to combine light and objects to give viewers an unforgettable visual experience.How-ever,the design process involves much trial and error;therefore,it is often very time-consuming.This has prompted many researchers to focus on proposing various algorithms to simplify the complicated design processes and help artists quickly realize the arts in their minds.To help computer graphics researchers interested in creating 3D visual optical art,we first classify and review relevant studies,then extract a general framework for solving 3D visual optical art design problems,and finally propose possible directions for future research.展开更多
The 3D visualization model of slop with structural plane can displayed the characters of structural plane in slop directly, and illustrated the spatial combination. It is a modem and critical question in the field of ...The 3D visualization model of slop with structural plane can displayed the characters of structural plane in slop directly, and illustrated the spatial combination. It is a modem and critical question in the field of geotechnical engineering. Based on the peculiarity of the reconnaissance and the research of the visualization by formers, systemized the method fit for building 3D visualization model of slop with structural plane. Write the special program with Visual C^-＋ computer language and illustrated it by OpenGL, the program can displayed and captured the random section plane. The program has a satisfied result by proving with the real projects.展开更多
This paper put forward the structure and construction process of three-dimensional visualization of hydroelectric construction system model based on GIS and 3D visualization platform. The paper first describes the 3D ...This paper put forward the structure and construction process of three-dimensional visualization of hydroelectric construction system model based on GIS and 3D visualization platform. The paper first describes the 3D visualization based on GIS, then discusses the method of constructing 3D visual digital model, and then introduces the terrain digital technology, feature modeling technology. Finally, the technical route shows that this method has good practicability.展开更多
The conventional 2D design method of culverts separated from 3D model cannot directly visualize the process of creating and renewal process. This paper explores graphics application framework of Open GL based on MFC, ...The conventional 2D design method of culverts separated from 3D model cannot directly visualize the process of creating and renewal process. This paper explores graphics application framework of Open GL based on MFC, developing the 3D visualization system of hydraulic culvert. This system effectively integrats with building design, structural design and parametric design and image processing technology. The results can be shown by 3D visualization design.展开更多
Three-dimensional(3 D) visual tracking of a multicopter(where the camera is fixed while the multicopter is moving) means continuously recovering the six-degree-of-freedom pose of the multicopter relative to the camera...Three-dimensional(3 D) visual tracking of a multicopter(where the camera is fixed while the multicopter is moving) means continuously recovering the six-degree-of-freedom pose of the multicopter relative to the camera. It can be used in many applications,such as precision terminal guidance and control algorithm validation for multicopters. However, it is difficult for many researchers to build a 3 D visual tracking system for multicopters(VTSMs) by using cheap and off-the-shelf cameras. This paper firstly gives an overview of the three key technologies of a 3 D VTSMs: multi-camera placement, multi-camera calibration and pose estimation for multicopters. Then, some representative 3 D visual tracking systems for multicopters are introduced. Finally, the future development of the 3D VTSMs is analyzed and summarized.展开更多
The mining loss rate and dilution rate are the key indicators for the mining technology and management level of mining enterprises. Aiming at the practical problems such as the large workload but inaccurate data of th...The mining loss rate and dilution rate are the key indicators for the mining technology and management level of mining enterprises. Aiming at the practical problems such as the large workload but inaccurate data of the traditional loss and dilution calculation method, this thesis introduces the operating principle and process of calculating the loss rate and dilution rate at the mining fields by adopting geological models. As an example, authors establishes 3D models of orebody units in the exhausted area and mining fields in Yangshu Gold Mine in Liaoning Province, and conduct Boolean calculation among the models to obtain the calculation parameters of loss and dilution, and thereby calculate out the dilution rate and loss rate of the mining fields more quickly and accurately.展开更多
Balkassar is an old field with considerable remaining potential. The 2d, 3d seismic and earlier vintages show that Balkassar is composed of two folds that impart heart shaped geometry. It appears likely the early Eoce...Balkassar is an old field with considerable remaining potential. The 2d, 3d seismic and earlier vintages show that Balkassar is composed of two folds that impart heart shaped geometry. It appears likely the early Eocene age Bhadrar formation may provide commercial production with lower water cuts from the eastern lobe (yet untapped) of the structure that may have at least 30 million barrels of unrecovered oil. Horizontal drilling may have promise as an optimum technique for recovery of oil from Paleogene reservoirs. Encouraging oil indications have also been recorded from the early Permian age tobra formation from Balkassar oxy-1 that was not tested by Oxy. Tobra sandstone reservoir can have a matrix porosity approaching 8%. When fractured recoveries from it can be relatively better than the Paleogene reservoirs. The 2D and 3D seismic acquisition has confirmed that the eastern lobe (yet untapped) of the Balkassar field is structurally higher and steeper than the Western lobe which has thus far produced over 30 million barrels. The Eastern lobe thus offers good potential for recovery of oil from the Bhadrar reservoir. The entire field is likely to have potential for recovery of oil from the early Eocene aged Tobra formation. 2-d and 3-D Seismic data interpretation, attribute analysis and visualization for deeper prospect carried in Balksasar field. Tobra and Khewra formation studied for deeper potential drilling. Time contour and depth contour map shows potential for deeper prospects. Also attribute analysis and 3d visualization show good results for deeper potential of Tobra and Khewar formations. Seismic amplitude, Reflection strength, Apparent polarity attribute are visualized and interpreted to find the potential for Tobra and Khewra formation. 3-D visualization also showed positive results for Tobra and Khewra formations.展开更多
The material flow in friction stir welded 2014 Al alloy has been investigated using a marker insert technique （MIT）. Results of the flow visualization show that the material flow is asymmetrical during the friction ...The material flow in friction stir welded 2014 Al alloy has been investigated using a marker insert technique （MIT）. Results of the flow visualization show that the material flow is asymmetrical during the friction stir welding （FSW） process and there are also significant differences in the flow patterns observed on advancing side and retreating side. On advancing side, some material transport forward and some move backward, but on retreating side, material only transport backward. At the top surface of the weld, significant material transport forward due to the action of the rotating tool shoulder. Combining the data from all the markers, a three-dituensional flow visualization, similar to the 3D image reconstruction technique, was obtained. The three-dimensional plot gives the tendency chart of material flow in friction stir welding process and from the plot it can be seen that there is a vertical, circular motion around the longitudinal axis of the weld. On the advancing side of the weld, the material is pushed downward but on the retreating side, the material is pushed toward the crown of the weld. The net result of the two relative motions in both side of the advancing and the retreating is that a circular motion comes into being. Comparatively, the material flow around the longitudinal axis is a secondary motion.展开更多
With the development of virtual reality application in the medical field, two-dimensional medical image of the three-dimensional visualization technology made possible. Surgery gets into minimally invasive operation m...With the development of virtual reality application in the medical field, two-dimensional medical image of the three-dimensional visualization technology made possible. Surgery gets into minimally invasive operation microscopy Era, and gradually becomes a new research hotspot. This paper studies the realization of two-dimensional medical im-age 3D reconstruction visualization system method, and the overall process and management module. Using the main technology of VTK (The Visualization Toolkit) to achieve a two-dimensional medical image three-dimensional visua-lization system, which can help the physician to obtain help clinical diagnosis Information and play an important role in treatment, accurate positioning in diseased tissue and tumor early diagnosis.展开更多
In this article, we present a three-dimensional visualization technique that has been developed in order to establish an interactive immersive environment to visualize the particles in granular materials and dislocati...In this article, we present a three-dimensional visualization technique that has been developed in order to establish an interactive immersive environment to visualize the particles in granular materials and dislocations in crystals. Simple elementary objects often exhibit complex collective behavior. Understanding of such behaviors and developments of coarse-scale theories, often requires insight into collective behavior that can only be obtained through immersive visualization. By displaying the computational results in a virtual environment with three-dimensional perception, one can immerse inside the model and analyze the intricate and very complex behavior of individual particles and dislocations. We built the stereographic images of the models using OpenGL rendering technique and then combine with the Virtual Reality technology in order to immerse in the three-dimensional model. A head mounted display has been used to allow the user to immerse inside the models and a flock of birds tracking device that allows the movements around and within the immersive environment.展开更多
基金the National Natural Science Foundation of China(No.61973210)the Interdisciplinary Program of Shanghai Jiao Tong University(Nos.YG2019ZDA17 and ZH2018QNB23)+1 种基金the Shanghai Advanced Technology Joint Research Fund(No.USCAST2020-7)the Shenzhen Science and Technology Commission Key Technology Project(No.JSGG20200701095003006)。
文摘The introduction of path planning and visual navigation in vascular interventional surgery can provide an intuitive reference and guidance for doctors.In this study,based on the preprocessing results of vessel skeleton extraction and stenosis diagnosis in X-ray coronary angiography images,clustering is used to determine the connectivity of the intersection points,and then the improved Dijkstra algorithm is used to automatically plan the surgical path.On this basis,the intermediate point is introduced to piecewise correct the path and improve the accuracy of the system.Finally,the epipolar constrained inverse projection transformation is used to reconstruct the coronary artery 3D model,and the optimal path is marked to achieve a multi-angle 3D visual navigation.Clinical experimental results show that compared with the traditional Dijkstra algorithm,the improved method can reduce the need for intermediate points,which improves computational efficiency,and the average error of manual calibration path is reduced to 4%of that before overall optimization.The results of 3D reconstruction and reprojection further qualitatively and quantitatively verify the effectiveness of the whole scheme.
基金Supported by research grants from the National Key Research and Development Program of China(No.2020YFE0204400)the National Natural Science Foundation of China(No.82271042+1 种基金No.52203191)the Zhejiang Province Key Research and Development Program(No.2023C03090).
文摘●AIM:To determine the teaching effects of a real-time three dimensional(3D)visualization system in the operating room for early-stage phacoemulsification training.●METHODS:A total of 10 ophthalmology residents of the first-year postgraduate were included.All the residents were novices to cataract surgery.Real-time cataract surgical observations were performed using a custom-built 3D visualization system.The training lasted 4wk(32h)in all.A modified International Council of Ophthalmology’s Ophthalmology Surgical Competency Assessment Rubric(ICO-OSCAR)containing 4 specific steps of cataract surgery was applied.The self-assessment(self)and expert-assessment(expert)were performed through the microsurgical attempts in the wet lab for each participant.●RESULTS:Compared with pre-training assessments(self 3.2±0.8,expert 2.5±0.6),the overall mean scores of posttraining(self 5.2±0.4,expert 4.7±0.6)were significantly improved after real-time observation training of 3D visualization system(P<0.05).Scores of 4 surgical items were significantly improved both self and expert assessment after training(P<0.05).●CONCLUSION:The 3D observation training provides novice ophthalmic residents with a better understanding of intraocular microsurgical techniques.It is a useful tool to improve teaching efficiency of surgical education.
基金Project 2002CB412601 supported by Chinese Ministry of Science and Technology
文摘3D visualization is one of major problems in “Digital Mine” theory and its technological research field. Through the observation of 3D geological models, spatial structural information, connected with the information of production management hidden in geological data, could be detected. In order to meet the requirement of more efficient coal exploration, a case study of geological characters of the Daliuta Coal Mine is presented in which 3D visual models of the ground surface and geologic bodies are established on the basis of data models and data structures of 3D geology modeling. The main conclusions of this study are as follows: (1) Through analysis and organization of spatial discrete data, the drillhole database is designed with the data of the Daliuta mine; the connections amomg drillhole data are real- ized and displayed in a 3D environment. (2) Combining real data of the Daliuta mine, drillhole visualization is realized in a 3D environment by using the CoalMiner system. (3) The ground surface modeling of the Daliuta coal mine adopted a surface-data model and a TIN data structure. (4) 3D models of coal seams and rock formations of the Daliuta mine are established, which provide a method for the simulation of complex surfaces of geologic bodies. In the end, the models are applied to the Daliuta coal mine and the result shows that better geological effects are obtained.
文摘3D visualization technology is a new seismic interpretation technology that is completely different from traditional seismic data interpretation technologies. This method takes geologic bodies or any 3D region of interest as a unit and integrates the points, lines, and planes of the bodies to make a 3D visual interpretation. This technology can be integrated with the coherence technique to interpret complex faults. Spatial domain automatic horizon tracing can accurately determine structural features. Target sculpting can determine the spatial dimensions and depth extent of perspective 3D lithology bodies using inversion data. I applied this technology to the interpretation of the complex block structures in the Guanxi area of Dagang Oilfield and the prediction of subtle reservoirs in the western slope of the Qinan sag with good results. This study indicated that the visual interpretation technology can be widely and effectively applied in oil field development and to improve the exploration success ratio.
基金This work is supported by the National Natural Science Foundation of China,No.62025207.
文摘Visual arts refer to art experienced primarily through vision.3D visual optical art is one of them.Artists use their rich imagination and experience to combine light and objects to give viewers an unforgettable visual experience.How-ever,the design process involves much trial and error;therefore,it is often very time-consuming.This has prompted many researchers to focus on proposing various algorithms to simplify the complicated design processes and help artists quickly realize the arts in their minds.To help computer graphics researchers interested in creating 3D visual optical art,we first classify and review relevant studies,then extract a general framework for solving 3D visual optical art design problems,and finally propose possible directions for future research.
文摘The 3D visualization model of slop with structural plane can displayed the characters of structural plane in slop directly, and illustrated the spatial combination. It is a modem and critical question in the field of geotechnical engineering. Based on the peculiarity of the reconnaissance and the research of the visualization by formers, systemized the method fit for building 3D visualization model of slop with structural plane. Write the special program with Visual C^-＋ computer language and illustrated it by OpenGL, the program can displayed and captured the random section plane. The program has a satisfied result by proving with the real projects.
文摘This paper put forward the structure and construction process of three-dimensional visualization of hydroelectric construction system model based on GIS and 3D visualization platform. The paper first describes the 3D visualization based on GIS, then discusses the method of constructing 3D visual digital model, and then introduces the terrain digital technology, feature modeling technology. Finally, the technical route shows that this method has good practicability.
文摘The conventional 2D design method of culverts separated from 3D model cannot directly visualize the process of creating and renewal process. This paper explores graphics application framework of Open GL based on MFC, developing the 3D visualization system of hydraulic culvert. This system effectively integrats with building design, structural design and parametric design and image processing technology. The results can be shown by 3D visualization design.
基金supported by the National Key Research and Development Program of China (No. 2017YFB1300102)National Natural Science Foundation of China (No. 61803025)
文摘Three-dimensional(3 D) visual tracking of a multicopter(where the camera is fixed while the multicopter is moving) means continuously recovering the six-degree-of-freedom pose of the multicopter relative to the camera. It can be used in many applications,such as precision terminal guidance and control algorithm validation for multicopters. However, it is difficult for many researchers to build a 3 D visual tracking system for multicopters(VTSMs) by using cheap and off-the-shelf cameras. This paper firstly gives an overview of the three key technologies of a 3 D VTSMs: multi-camera placement, multi-camera calibration and pose estimation for multicopters. Then, some representative 3 D visual tracking systems for multicopters are introduced. Finally, the future development of the 3D VTSMs is analyzed and summarized.
文摘The mining loss rate and dilution rate are the key indicators for the mining technology and management level of mining enterprises. Aiming at the practical problems such as the large workload but inaccurate data of the traditional loss and dilution calculation method, this thesis introduces the operating principle and process of calculating the loss rate and dilution rate at the mining fields by adopting geological models. As an example, authors establishes 3D models of orebody units in the exhausted area and mining fields in Yangshu Gold Mine in Liaoning Province, and conduct Boolean calculation among the models to obtain the calculation parameters of loss and dilution, and thereby calculate out the dilution rate and loss rate of the mining fields more quickly and accurately.
文摘Balkassar is an old field with considerable remaining potential. The 2d, 3d seismic and earlier vintages show that Balkassar is composed of two folds that impart heart shaped geometry. It appears likely the early Eocene age Bhadrar formation may provide commercial production with lower water cuts from the eastern lobe (yet untapped) of the structure that may have at least 30 million barrels of unrecovered oil. Horizontal drilling may have promise as an optimum technique for recovery of oil from Paleogene reservoirs. Encouraging oil indications have also been recorded from the early Permian age tobra formation from Balkassar oxy-1 that was not tested by Oxy. Tobra sandstone reservoir can have a matrix porosity approaching 8%. When fractured recoveries from it can be relatively better than the Paleogene reservoirs. The 2D and 3D seismic acquisition has confirmed that the eastern lobe (yet untapped) of the Balkassar field is structurally higher and steeper than the Western lobe which has thus far produced over 30 million barrels. The Eastern lobe thus offers good potential for recovery of oil from the Bhadrar reservoir. The entire field is likely to have potential for recovery of oil from the early Eocene aged Tobra formation. 2-d and 3-D Seismic data interpretation, attribute analysis and visualization for deeper prospect carried in Balksasar field. Tobra and Khewra formation studied for deeper potential drilling. Time contour and depth contour map shows potential for deeper prospects. Also attribute analysis and 3d visualization show good results for deeper potential of Tobra and Khewar formations. Seismic amplitude, Reflection strength, Apparent polarity attribute are visualized and interpreted to find the potential for Tobra and Khewra formation. 3-D visualization also showed positive results for Tobra and Khewra formations.
文摘The material flow in friction stir welded 2014 Al alloy has been investigated using a marker insert technique （MIT）. Results of the flow visualization show that the material flow is asymmetrical during the friction stir welding （FSW） process and there are also significant differences in the flow patterns observed on advancing side and retreating side. On advancing side, some material transport forward and some move backward, but on retreating side, material only transport backward. At the top surface of the weld, significant material transport forward due to the action of the rotating tool shoulder. Combining the data from all the markers, a three-dituensional flow visualization, similar to the 3D image reconstruction technique, was obtained. The three-dimensional plot gives the tendency chart of material flow in friction stir welding process and from the plot it can be seen that there is a vertical, circular motion around the longitudinal axis of the weld. On the advancing side of the weld, the material is pushed downward but on the retreating side, the material is pushed toward the crown of the weld. The net result of the two relative motions in both side of the advancing and the retreating is that a circular motion comes into being. Comparatively, the material flow around the longitudinal axis is a secondary motion.
文摘With the development of virtual reality application in the medical field, two-dimensional medical image of the three-dimensional visualization technology made possible. Surgery gets into minimally invasive operation microscopy Era, and gradually becomes a new research hotspot. This paper studies the realization of two-dimensional medical im-age 3D reconstruction visualization system method, and the overall process and management module. Using the main technology of VTK (The Visualization Toolkit) to achieve a two-dimensional medical image three-dimensional visua-lization system, which can help the physician to obtain help clinical diagnosis Information and play an important role in treatment, accurate positioning in diseased tissue and tumor early diagnosis.
文摘In this article, we present a three-dimensional visualization technique that has been developed in order to establish an interactive immersive environment to visualize the particles in granular materials and dislocations in crystals. Simple elementary objects often exhibit complex collective behavior. Understanding of such behaviors and developments of coarse-scale theories, often requires insight into collective behavior that can only be obtained through immersive visualization. By displaying the computational results in a virtual environment with three-dimensional perception, one can immerse inside the model and analyze the intricate and very complex behavior of individual particles and dislocations. We built the stereographic images of the models using OpenGL rendering technique and then combine with the Virtual Reality technology in order to immerse in the three-dimensional model. A head mounted display has been used to allow the user to immerse inside the models and a flock of birds tracking device that allows the movements around and within the immersive environment.
