Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted dru...Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.展开更多
Cubic-shaped magnetic particles subjected to a dimensionless uniaxial anisotropy(Q=0.1)aligned with one of the crystallographic axes provide an ideal system for investigating magnetic equilibrium states.In this system...Cubic-shaped magnetic particles subjected to a dimensionless uniaxial anisotropy(Q=0.1)aligned with one of the crystallographic axes provide an ideal system for investigating magnetic equilibrium states.In this system,three fundamental magnetization configurations are identified:(i)the flower state,(ii)the twisted flower state,and(iii)the vortex state.This problem corresponds to standard problem No.3 proposed by the NIST Micromagnetics Modeling Group,widely adopted as a benchmark for validating computational micromagnetics methods.In this work,we approach the problem using a computational method based on direct dipolar interactions,in contrast to conventional techniques that typically compute the demagnetizing field via finite difference-based fast Fourier transform(FFT)methods,tensor grid approaches,or finite element formulations.Our results are compared with established literature data,focusing on the dimensionless parameterλ=L/l_(ex),where L is the cube edge length and l_(ex)is the exchange length of the material.To analyze equilibrium state transitions,we systematically varied the size L as a function of the simulation cell number N and intercellular spacing a,determining the criticalλvalue associated with configuration changes.Our simulations reveal that the transition between the twisted flower and vortex states occurs atλ≈8.45,consistent with values reported in the literature,validating our code(Grupo de Física da Matéeria Condensada-UFJF),and shows that this standard problem can be resolved using only interaction dipolar of a direct way without the need for sophisticated additional calculations.展开更多
Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical si...Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.展开更多
As a representative insensitive high explosive,3-nitro-1,2,4-triazol-5-one(NTO)has garnered significant attention due to its ability to substantially reduce the risk of accidental detonation in munitions.However,its i...As a representative insensitive high explosive,3-nitro-1,2,4-triazol-5-one(NTO)has garnered significant attention due to its ability to substantially reduce the risk of accidental detonation in munitions.However,its inherent acidity induces severe interfacial corrosion of metal casings,thereby limiting its engineering applications.Based on the micro-corrosion mechanism of NTO on carbon steel(CS),this study designs an arginine-derived corrosion inhibitor,N2-[(phenylamino)thioxomethyl]-arginine(PTA).Electrochemical tests reveal that PTA exhibits an outstanding corrosion inhibition efficiency of 98.0%in NTO solution.Density functional theory(DFT)and molecular dynamics(MD)simulations elucidate the inhibition mechanism of PTA,demonstrating that it not only co-adsorbs with NTO^(−) onto the CS surface to form a dense and stable protective film but also disrupts the strong interactions between NTO^(−) and Fe,thereby suppressing nitro group-induced reduction,decomposition,and excessive surface oxidation.Furthermore,a PTA-loaded mesoporous silica(mSiO_(2))nanoparticles(NPs)-reinforced epoxy resin(EP)composite coating was constructed.Benefiting from the enhanced barrier properties of PTA@mSiO_(2) NPs and the synergistic effect between PTA and NTO^(−),the low-frequency impedance of the composite coating remained as high as 1.29×10^(9)Ω·cm^(2) after 30 days of immersion in NTO solution,exhibiting a two-order-of-magnitude improvement compared to the pure EP coating.This study proposes an effective corrosion control strategy to mitigate NTO-induced corrosion,providing insights into the development of advanced corrosion protection strategies for broader applications.展开更多
The Microwave Land Surface Emissivity(MLSE)atlas and instantaneous simulation of all-sky/all-surface MLSE are important prerequisites for satellite data assimilation.A ten-day/month synthesized FengYun-3D MLSE atlas(N...The Microwave Land Surface Emissivity(MLSE)atlas and instantaneous simulation of all-sky/all-surface MLSE are important prerequisites for satellite data assimilation.A ten-day/month synthesized FengYun-3D MLSE atlas(New_FY3D)was constructed by the two global MLSE daily product datasets,clear-sky(FY-3D1)and clear/cloudy(FY-3D2),which were retrieved from the same FY-3D MicroWave Radiation Imager(MWRI)Level-1 brightness temperature(BT)data from 2021 to 2022,respectively.Then,a set of global MLSE label samples based on the New_FY3D,including 14 surface geophysical parameters,was obtained for an instantaneous global MLSE simulation at a 0.10°spatial resolution by adopting the extreme gradient boosting(XGBoost)machine learning method.Finally,the FengYun-3F(FY-3F)MWRI-II BT simulations using the Advanced Radiative Transfer Modeling System(ARMS)based on the above different MLSE products were evaluated.The results show that the New_FY3D atlas performs well,and the BT simulation at the top of atmosphere is better than that of FY-3D1,FY-3D2,and the international mainstream TELSEM2(Version 2.0 for a Tool to Estimate Land Surface Emissivities in the Microwaves)atlas.Surface roughness,vegetation coverage,land cover type,and snow cover are vital parameters for MLSE simulation.The XGBoost model can accurately simulate all-sky/all-surface MLSE instantaneously over the frequency range 10.65–89.0 GHz.The average simulation determination coefficients(R^(2))under clear-sky and cloud-sky conditions are 0.925 and 0.901,respectively,and the average root-mean-square errors(RMSEs)are 0.018 and 0.021,respectively.Large simulation errors occur in permanent wetland,ice and snow,and urban and built-up areas.With a standard deviation of 6.6 K,the BT simulation based on an XGBoost simulated MLSE is better than those based on New_FY3D and TELSEM2.展开更多
A accelerated arithmetic algorithm of the dynamic computing regions was designed,and 3-dimensional numerical simulation of isothermal solidification for a binary alloy was implemented.The dendritic growth and the reca...A accelerated arithmetic algorithm of the dynamic computing regions was designed,and 3-dimensional numerical simulation of isothermal solidification for a binary alloy was implemented.The dendritic growth and the recalescence of Ni-Cu binary alloy during the solidification at different cooling rates were investigated.The effects of cooling rate on dendritic patterns and microsegregation patterns were studied.The computed results indicate that,with the increment of the cooling rate,the dendritic growth velocity increases,both the main branch and side-branches become slender,the secondary dendrite arm spacing becomes smaller,the inadequate solute diffusion in solid aggravates,and the severity of microsegregation ahead of interface aggravates.At a higher cooling rate,the binary alloy presents recalescence;while the cooling rate is small,no recalescence occurs.展开更多
A new quasi-three-dimensional （quasi-3D） numeric simulation method for a high-voltage level-shifting circuit structure is proposed. The performances of the 3D structure are analyzed by combining some 2D device struc...A new quasi-three-dimensional （quasi-3D） numeric simulation method for a high-voltage level-shifting circuit structure is proposed. The performances of the 3D structure are analyzed by combining some 2D device structures; the 2D devices are in two planes perpendicular to each other and to the surface of the semiconductor. In comparison with Davinci, the full 3D device simulation tool, the quasi-3D simulation method can give results for the potential and current distribution of the 3D high-voltage level-shifting circuit structure with appropriate accuracy and the total CPU time for simulation is significantly reduced. The quasi-3D simulation technique can be used in many cases with advantages such as saving computing time, making no demands on the high-end computer terminals, and being easy to operate.展开更多
Upon the conservation of mass, momentum and energy, volume fraction and surface penetrative rate were employed to modify the conservative equations to simulate the effect of blockages on fluid flows and heat transfer....Upon the conservation of mass, momentum and energy, volume fraction and surface penetrative rate were employed to modify the conservative equations to simulate the effect of blockages on fluid flows and heat transfer. These equations were solved numerically with the finite differential method and the primitive variable approach. This method uses staggered grid and pressure correction schemes. A computer code FASTOR3D integrated the aforementioned algorithm. The preliminary results have been compared with conventional benchmark solutions. With auxiliary software DV, the numerical results were visualized in colorful images to demonstrate the variation of flow patterns and temperature profiles during the transient process. The results of the simulation code for the fluid flows and heat transfer in the sodium pool of a fast breeder reactor are acceptable.展开更多
With respect to oceanic fluid dynamics,certain models have appeared,e.g.,an extended time-dependent(3+1)-dimensional shallow water wave equation in an ocean or a river,which we investigate in this paper.Using symbolic...With respect to oceanic fluid dynamics,certain models have appeared,e.g.,an extended time-dependent(3+1)-dimensional shallow water wave equation in an ocean or a river,which we investigate in this paper.Using symbolic computation,we find out,on one hand,a set of bilinear auto-Backlund transformations,which could connect certain solutions of that equation with other solutions of that equation itself,and on the other hand,a set of similarity reductions,which could go from that equation to a known ordinary differential equation.The results in this paper depend on all the oceanic variable coefficients in that equation.展开更多
This paper proposes a novel cargo loading algorithm applicable to automated conveyor-type loading systems.The algorithm offers improvements in computational efficiency and robustness by utilizing the concept of discre...This paper proposes a novel cargo loading algorithm applicable to automated conveyor-type loading systems.The algorithm offers improvements in computational efficiency and robustness by utilizing the concept of discrete derivatives and introducing logistics-related constraints.Optional consideration of the rotation of the cargoes was made to further enhance the optimality of the solutions,if possible to be physically implemented.Evaluation metrics were developed for accurate evaluation and enhancement of the algorithm’s ability to efficiently utilize the loading space and provide a high level of dynamic stability.Experimental results demonstrate the extensive robustness of the proposed algorithm to the diversity of cargoes present in Business-to-Consumer environments.This study contributes practical advancements in both cargo loading optimization and automation of the logistics industry,with potential applications in last-mile delivery services,warehousing,and supply chain management.展开更多
Lie symmetry analysis is applied to a(3+1)-dimensional combined potential Kadomtsev-Petviashvili equation with B-type Kadomtsev-Petviashvili equation(pKP-BKP equation)and the corresponding similarity reduction equatio...Lie symmetry analysis is applied to a(3+1)-dimensional combined potential Kadomtsev-Petviashvili equation with B-type Kadomtsev-Petviashvili equation(pKP-BKP equation)and the corresponding similarity reduction equations are obtained with the different infinitesimal generators.Invariant solutions with arbitrary functions and constants for the(3+1)-dimensional pKP-BKP equation,including the lump solution,the periodic-lump solution,the two-kink solution,the breather solution and the lump-two-kink solution,have been studied analytically and graphically.展开更多
Tree rings provide long-term records of tree growth and climate changes,which makes them ideal benchmarks for forest modeling.Tree-ring information has greatly improved the reliability of 3-PG,which is one of the most...Tree rings provide long-term records of tree growth and climate changes,which makes them ideal benchmarks for forest modeling.Tree-ring information has greatly improved the reliability of 3-PG,which is one of the most commonly used process-based forest growth models.Here,we strengthen 3-PG's ability to simulate tree-ring width and stable carbon isotopes(δ^(13)C)by enhancing its descriptions of tree physiology.The major upgrade was adding a carbon storage pool for tree-ring formation using stored carbohydrates.We also incorporated previous modifications(replacing the age modifier with a height modifier)of 3-PG and tested their efficacy in improving tree-ring simulations.We ran the model based on two grand fir(Abies grandis)stands.The updated model greatly improved the simulations for both tree-ring widths andδ^(13)C.The results represent one of the best tree-ringδ^(13)C simulations,which accurately captured the amplitude in annual variations ofδ^(13)C.The correlations(R^(2))between simulations and observations reached 0.50 and 0.73 at two stands,respectively.The new model also greatly improved the simulations of raw tree-ring widths and detrended ring-width index(RWI).Because of better descriptions of tree physiology and more accurate simulations of tree rings than the previous model version,the updated 3-PG should provide more reliable simulations than previous 3-PG versions when tree-ring information is used as a benchmark in future studies.展开更多
In this article,a Generalized Calogero-Bogoyavlenskii-Schiff(CBS)equation is studied,serving as an extended shallow water wave model in higher dimensions.Firstly,utilizing the Bell polynomial method,the bilinear form ...In this article,a Generalized Calogero-Bogoyavlenskii-Schiff(CBS)equation is studied,serving as an extended shallow water wave model in higher dimensions.Firstly,utilizing the Bell polynomial method,the bilinear form of the equation,bilinear Bäcklund transformation,Lax pair and infinite conservation laws are derived,confirming the equation’s complete integrability in the context of the Lax pair.Subsequently,the nonlinear superposition formula of the equation is constructed based on the derived bilinear Bäcklund transformation and an array of infinite superposition soliton solutions of the equation are formulated using this nonlinear superposition formula.Lastly,leveraging the obtained bilinear equation,infinite superposition solutions of various functional types are constructed.Their dynamic characteristics are analyzed through illustrated solution images.It is noteworthy that this paper not only uncovers a multitude of properties through the Bell polynomial method but also derives both infinite linear and nonlinear superposition solutions,enriching the diversity of solutions,these aspects have not been previously explored in existing literature.展开更多
Contact detection is the most time-consuming stage in 3D discontinuous deformation analysis(3D-DDA)computation.Improving the efficiency of 3D-DDA is beneficial for its application in large-scale computing.In this stud...Contact detection is the most time-consuming stage in 3D discontinuous deformation analysis(3D-DDA)computation.Improving the efficiency of 3D-DDA is beneficial for its application in large-scale computing.In this study,aiming at the continuous-discontinuous simulation of 3D-DDA,a highly efficient contact detection strategy is proposed.Firstly,the global direct search(GDS)method is integrated into the 3D-DDA framework to address intricate contact scenarios.Subsequently,all geometric elements,including blocks,faces,edges,and vertices are divided into searchable and unsearchable parts.Contacts between unsearchable geometric elements would be directly inherited,while only searchable geometric elements are involved in contact detection.This strategy significantly reduces the number of geometric elements involved in contact detection,thereby markedly enhancing the computation efficiency.Several examples are adopted to demonstrate the accuracy and efficiency of the improved 3D-DDA method.The rock pillars with different mesh sizes are simulated under self-weight.The deformation and stress are consistent with the analytical results,and the smaller the mesh size,the higher the accuracy.The maximum speedup ratio is 38.46 for this case.Furthermore,the Brazilian splitting test on the discs with different flaws is conducted.The results show that the failure pattern of the samples is consistent with the results obtained by other methods and experiments,and the maximum speedup ratio is 266.73.Finally,a large-scale impact test is performed,and approximately 3.2 times enhanced efficiency is obtained.The proposed contact detection strategy significantly improves efficiency when the rock has not completely failed,which is more suitable for continuous-discontinuous simulation.展开更多
The numerical simulation is based on the authors' high-order models with a dissipative term for nonlinear and dispersive wave in water of varying depth. Corresponding finite-difference equations and general condit...The numerical simulation is based on the authors' high-order models with a dissipative term for nonlinear and dispersive wave in water of varying depth. Corresponding finite-difference equations and general conditions for open and fixed natural boundaries with an arbitrary reflection coefficient and phase shift are also given in this paper. The systematical tests of numerical simulation show that the theoretical models, the finite-difference algorithms and the boundary conditions can give good calculation results for the wave propagating in shallow and deep water with an arbitrary slope varying from gentle to steep.展开更多
In this paper, the three-dimensional variational data assimilation scheme (3DVAR) in the mesoscale model version 5 (MM5) of the US Pennsylvania State University/National Center for Atmospheric Research is used to stud...In this paper, the three-dimensional variational data assimilation scheme (3DVAR) in the mesoscale model version 5 (MM5) of the US Pennsylvania State University/National Center for Atmospheric Research is used to study the effect of assimilating the sea-wind data from QuikSCAT on the prediction of typhoon track and intensity. The case of Typhoon Dujuan (2003) is first tested and the results show appreciable improvements. Twelve other cases in 2003 are then evaluated. The assimilation of the QuikSCAT data produces significant impacts on the structure of Dujuan in terms of the horizontal and vertical winds, sea-level pressure and temperature at the initial time. With the assimilation, the 24-h (48-h) track prediction of 11 (10) out of the 12 typhoons is improved. The 24-h (48-h) prediction of typhoon intensity is also improved in 10 (9) of the 12 cases. These experiments therefore demonstrate that assimilation of the QuikSCAT sea-wind data can increase the accuracy of typhoon track and intensity predictions through modification of the initial fields associated with the typhoon.展开更多
In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic （where mastic is a kind of fine mixture composed of asphalt binder mixed with fi...In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic （where mastic is a kind of fine mixture composed of asphalt binder mixed with fines and fine aggregates） and air voids, based on three-dimensional （3D） heterogeneous specimen, X-ray computerized tomography （X-ray CT） was used to scan the asphalt specimens to obtain the real internal microstrnctures of asphalt mixture. CT images were reconstructed to build up 3D digital specimen, and the viscoelastic properties of mastic were described with Burgers model The uniaxial creep numerical simulations of three different levels of aggregate gradation were conducted. The simulation results agree well with the experimental results. The numerical simulation of asphalt mixture incorporated with real 3D microstructure based on finite element method is a promising application to conduct research of asphalt concrete. Additionally, this method can increase the mechanistic understanding of global viscoelastic properties of asphalt mixtures by linking the real 3D microstructure.展开更多
Neutron well logging,using instruments equipped with neutron source and detectors(e.g.,^(3)He-tubes,Nal,BGO),plays a key role in lithological differentiation,porosity determination,and fluid property evaluation in the...Neutron well logging,using instruments equipped with neutron source and detectors(e.g.,^(3)He-tubes,Nal,BGO),plays a key role in lithological differentiation,porosity determination,and fluid property evaluation in the petroleum industry.The growing trend of multifu nctional neutron well logging,which enables simultaneous extraction of multiple reservoir characteristics,requiring high-performance detectors capable of withstanding high-temperature downhole conditions,limited space,and instrument vibrations,while also detecting multiple particle types.The Cs_(2)LiYCl_(6):Ce^(3+)(CLYC)elpasolite scintillator demonstrates excellent temperature resistance and detection efficiency,making it become a promising candidate for leading the development of the novel neutron-based double-particle logging technology.This study employed Monte Carlo simulations to generate equivalent gamma spectra and proposed a pulse shape discrimination simulation method based on theoretical analysis and probabilistic iteration.The performance of CLYC was compared to that of common detectors in terms of physical properties and detection efficiency.A double-particle pulsed neutron detection system for porosity determination was established,based on the count ratio of equivalent gamma rays from the range of 2.95-3.42 MeVee energy bins.Results showed that CLYC can effectively replace ^(3)He-tubes for porosity measurement,providing consistent responses.This study offers numerical simulation support for the design of future neutron well logging tools and the application of double-particle detectors in logging systems.展开更多
The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the c...The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the calculation accuracy.In this paper,a Cross-dimensional Data Transmission method(CDT)from 3D to 1D is proposed by introducing flow field uniformity into the data transmission.First,a uniformity index was established to quantify the flow field parameter distribution characteristics,and a uniformity index prediction model based on the locally weighted regression method(Lowess)was established to quickly obtain the flow field information.Then,an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation,and the calculation method was automatically determined according to the established criterion.Finally,a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution,which are then used to modify the selected parameters at the 1D-3D interface.Taking a typical disk cavity air system as an example,the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88%compared with the traditional 1D-3D coupling method.Furthermore,the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.展开更多
The fabrication process dependent effects on single event effects （SEEs） are investigated in a commercial silicon- germanium heterojunction bipolar transistor （SiGe HBT） using three-dimensional （3D） TCAD simulat...The fabrication process dependent effects on single event effects （SEEs） are investigated in a commercial silicon- germanium heterojunction bipolar transistor （SiGe HBT） using three-dimensional （3D） TCAD simulations. The influences of device structure and doping concentration on SEEs are discussed via analysis of current transient and charge collection induced by ions strike. The results show that the SEEs representation of current transient is different from representation of the charge collection for the same process parameters. To be specific, the area of C/S junction is the key parameter that affects charge collection of SEE. Both current transient and charge collection are dependent on the doping of collector and substrate. The base doping slightly influences transient currents of base, emitter, and collector terminals. However, the SEEs of SiGe HBT are hardly affected by the doping of epitaxial base and the content of Ge.展开更多
文摘Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.
基金CAPES,CNPq,and FAPEMIG(Brazilian Agencies)for their financial support。
文摘Cubic-shaped magnetic particles subjected to a dimensionless uniaxial anisotropy(Q=0.1)aligned with one of the crystallographic axes provide an ideal system for investigating magnetic equilibrium states.In this system,three fundamental magnetization configurations are identified:(i)the flower state,(ii)the twisted flower state,and(iii)the vortex state.This problem corresponds to standard problem No.3 proposed by the NIST Micromagnetics Modeling Group,widely adopted as a benchmark for validating computational micromagnetics methods.In this work,we approach the problem using a computational method based on direct dipolar interactions,in contrast to conventional techniques that typically compute the demagnetizing field via finite difference-based fast Fourier transform(FFT)methods,tensor grid approaches,or finite element formulations.Our results are compared with established literature data,focusing on the dimensionless parameterλ=L/l_(ex),where L is the cube edge length and l_(ex)is the exchange length of the material.To analyze equilibrium state transitions,we systematically varied the size L as a function of the simulation cell number N and intercellular spacing a,determining the criticalλvalue associated with configuration changes.Our simulations reveal that the transition between the twisted flower and vortex states occurs atλ≈8.45,consistent with values reported in the literature,validating our code(Grupo de Física da Matéeria Condensada-UFJF),and shows that this standard problem can be resolved using only interaction dipolar of a direct way without the need for sophisticated additional calculations.
基金financially supported by the National Key Research and Development Program of China (2022YFB3706802)。
文摘Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.
文摘As a representative insensitive high explosive,3-nitro-1,2,4-triazol-5-one(NTO)has garnered significant attention due to its ability to substantially reduce the risk of accidental detonation in munitions.However,its inherent acidity induces severe interfacial corrosion of metal casings,thereby limiting its engineering applications.Based on the micro-corrosion mechanism of NTO on carbon steel(CS),this study designs an arginine-derived corrosion inhibitor,N2-[(phenylamino)thioxomethyl]-arginine(PTA).Electrochemical tests reveal that PTA exhibits an outstanding corrosion inhibition efficiency of 98.0%in NTO solution.Density functional theory(DFT)and molecular dynamics(MD)simulations elucidate the inhibition mechanism of PTA,demonstrating that it not only co-adsorbs with NTO^(−) onto the CS surface to form a dense and stable protective film but also disrupts the strong interactions between NTO^(−) and Fe,thereby suppressing nitro group-induced reduction,decomposition,and excessive surface oxidation.Furthermore,a PTA-loaded mesoporous silica(mSiO_(2))nanoparticles(NPs)-reinforced epoxy resin(EP)composite coating was constructed.Benefiting from the enhanced barrier properties of PTA@mSiO_(2) NPs and the synergistic effect between PTA and NTO^(−),the low-frequency impedance of the composite coating remained as high as 1.29×10^(9)Ω·cm^(2) after 30 days of immersion in NTO solution,exhibiting a two-order-of-magnitude improvement compared to the pure EP coating.This study proposes an effective corrosion control strategy to mitigate NTO-induced corrosion,providing insights into the development of advanced corrosion protection strategies for broader applications.
基金supported by the National Natural Science Foundation of China(Grant No.U2242211)the Hunan Provincial Natural Science Foundation Major Project(Grant No.2021JC0009).
文摘The Microwave Land Surface Emissivity(MLSE)atlas and instantaneous simulation of all-sky/all-surface MLSE are important prerequisites for satellite data assimilation.A ten-day/month synthesized FengYun-3D MLSE atlas(New_FY3D)was constructed by the two global MLSE daily product datasets,clear-sky(FY-3D1)and clear/cloudy(FY-3D2),which were retrieved from the same FY-3D MicroWave Radiation Imager(MWRI)Level-1 brightness temperature(BT)data from 2021 to 2022,respectively.Then,a set of global MLSE label samples based on the New_FY3D,including 14 surface geophysical parameters,was obtained for an instantaneous global MLSE simulation at a 0.10°spatial resolution by adopting the extreme gradient boosting(XGBoost)machine learning method.Finally,the FengYun-3F(FY-3F)MWRI-II BT simulations using the Advanced Radiative Transfer Modeling System(ARMS)based on the above different MLSE products were evaluated.The results show that the New_FY3D atlas performs well,and the BT simulation at the top of atmosphere is better than that of FY-3D1,FY-3D2,and the international mainstream TELSEM2(Version 2.0 for a Tool to Estimate Land Surface Emissivities in the Microwaves)atlas.Surface roughness,vegetation coverage,land cover type,and snow cover are vital parameters for MLSE simulation.The XGBoost model can accurately simulate all-sky/all-surface MLSE instantaneously over the frequency range 10.65–89.0 GHz.The average simulation determination coefficients(R^(2))under clear-sky and cloud-sky conditions are 0.925 and 0.901,respectively,and the average root-mean-square errors(RMSEs)are 0.018 and 0.021,respectively.Large simulation errors occur in permanent wetland,ice and snow,and urban and built-up areas.With a standard deviation of 6.6 K,the BT simulation based on an XGBoost simulated MLSE is better than those based on New_FY3D and TELSEM2.
基金Project(10964004)supported by the National Natural Science Foundation of ChinaProject(20070231001)supported by Research Fund for the Doctoral Program of Higher Education of China+1 种基金Project(096RJZA104)supported by the Natural Science Foundation of Gansu Province,ChinaProject(SB14200801)supported by the Doctoral Fund of Lanzhou University of Technology
文摘A accelerated arithmetic algorithm of the dynamic computing regions was designed,and 3-dimensional numerical simulation of isothermal solidification for a binary alloy was implemented.The dendritic growth and the recalescence of Ni-Cu binary alloy during the solidification at different cooling rates were investigated.The effects of cooling rate on dendritic patterns and microsegregation patterns were studied.The computed results indicate that,with the increment of the cooling rate,the dendritic growth velocity increases,both the main branch and side-branches become slender,the secondary dendrite arm spacing becomes smaller,the inadequate solute diffusion in solid aggravates,and the severity of microsegregation ahead of interface aggravates.At a higher cooling rate,the binary alloy presents recalescence;while the cooling rate is small,no recalescence occurs.
基金supported by the National Natural Science Foundation of China(No.50777005)the Young Foundation of University of Electronic Science and Technology of China(No.JX0832)
文摘A new quasi-three-dimensional （quasi-3D） numeric simulation method for a high-voltage level-shifting circuit structure is proposed. The performances of the 3D structure are analyzed by combining some 2D device structures; the 2D devices are in two planes perpendicular to each other and to the surface of the semiconductor. In comparison with Davinci, the full 3D device simulation tool, the quasi-3D simulation method can give results for the potential and current distribution of the 3D high-voltage level-shifting circuit structure with appropriate accuracy and the total CPU time for simulation is significantly reduced. The quasi-3D simulation technique can be used in many cases with advantages such as saving computing time, making no demands on the high-end computer terminals, and being easy to operate.
文摘Upon the conservation of mass, momentum and energy, volume fraction and surface penetrative rate were employed to modify the conservative equations to simulate the effect of blockages on fluid flows and heat transfer. These equations were solved numerically with the finite differential method and the primitive variable approach. This method uses staggered grid and pressure correction schemes. A computer code FASTOR3D integrated the aforementioned algorithm. The preliminary results have been compared with conventional benchmark solutions. With auxiliary software DV, the numerical results were visualized in colorful images to demonstrate the variation of flow patterns and temperature profiles during the transient process. The results of the simulation code for the fluid flows and heat transfer in the sodium pool of a fast breeder reactor are acceptable.
基金financially supported by the Scientific Research Foundation of North China University of Technology(Grant Nos.11005136024XN147-87 and 110051360024XN151-86).
文摘With respect to oceanic fluid dynamics,certain models have appeared,e.g.,an extended time-dependent(3+1)-dimensional shallow water wave equation in an ocean or a river,which we investigate in this paper.Using symbolic computation,we find out,on one hand,a set of bilinear auto-Backlund transformations,which could connect certain solutions of that equation with other solutions of that equation itself,and on the other hand,a set of similarity reductions,which could go from that equation to a known ordinary differential equation.The results in this paper depend on all the oceanic variable coefficients in that equation.
基金supported by the BK21 FOUR funded by the Ministry of Education of Korea and National Research Foundation of Korea,a Korea Agency for Infrastructure Technology Advancement(KAIA)grant funded by the Ministry of Land,Infrastructure,and Transport(Grant 1615013176)IITP(Institute of Information&Coummunications Technology Planning&Evaluation)-ICAN(ICT Challenge and Advanced Network of HRD)grant funded by the Korea government(Ministry of Science and ICT)(RS-2024-00438411).
文摘This paper proposes a novel cargo loading algorithm applicable to automated conveyor-type loading systems.The algorithm offers improvements in computational efficiency and robustness by utilizing the concept of discrete derivatives and introducing logistics-related constraints.Optional consideration of the rotation of the cargoes was made to further enhance the optimality of the solutions,if possible to be physically implemented.Evaluation metrics were developed for accurate evaluation and enhancement of the algorithm’s ability to efficiently utilize the loading space and provide a high level of dynamic stability.Experimental results demonstrate the extensive robustness of the proposed algorithm to the diversity of cargoes present in Business-to-Consumer environments.This study contributes practical advancements in both cargo loading optimization and automation of the logistics industry,with potential applications in last-mile delivery services,warehousing,and supply chain management.
文摘Lie symmetry analysis is applied to a(3+1)-dimensional combined potential Kadomtsev-Petviashvili equation with B-type Kadomtsev-Petviashvili equation(pKP-BKP equation)and the corresponding similarity reduction equations are obtained with the different infinitesimal generators.Invariant solutions with arbitrary functions and constants for the(3+1)-dimensional pKP-BKP equation,including the lump solution,the periodic-lump solution,the two-kink solution,the breather solution and the lump-two-kink solution,have been studied analytically and graphically.
基金supported by the National Natural Science Foundation of China(Nos.42271048,42430503,and 31971492).
文摘Tree rings provide long-term records of tree growth and climate changes,which makes them ideal benchmarks for forest modeling.Tree-ring information has greatly improved the reliability of 3-PG,which is one of the most commonly used process-based forest growth models.Here,we strengthen 3-PG's ability to simulate tree-ring width and stable carbon isotopes(δ^(13)C)by enhancing its descriptions of tree physiology.The major upgrade was adding a carbon storage pool for tree-ring formation using stored carbohydrates.We also incorporated previous modifications(replacing the age modifier with a height modifier)of 3-PG and tested their efficacy in improving tree-ring simulations.We ran the model based on two grand fir(Abies grandis)stands.The updated model greatly improved the simulations for both tree-ring widths andδ^(13)C.The results represent one of the best tree-ringδ^(13)C simulations,which accurately captured the amplitude in annual variations ofδ^(13)C.The correlations(R^(2))between simulations and observations reached 0.50 and 0.73 at two stands,respectively.The new model also greatly improved the simulations of raw tree-ring widths and detrended ring-width index(RWI).Because of better descriptions of tree physiology and more accurate simulations of tree rings than the previous model version,the updated 3-PG should provide more reliable simulations than previous 3-PG versions when tree-ring information is used as a benchmark in future studies.
基金the Natural Science Foundation of Inner Mongolia Autonomous Region(Grant No.2024MS01003)the First-Class Disciplines Project,Inner Mongolia Autonomous Region,China(Grant Nos.YLXKZX-NSD-001 and YLXKZX-NSD-009)the Program for Innovative Research Team in Universities of Inner Mongolia Autonomous Region(Grant No.NMGIRT2414).
文摘In this article,a Generalized Calogero-Bogoyavlenskii-Schiff(CBS)equation is studied,serving as an extended shallow water wave model in higher dimensions.Firstly,utilizing the Bell polynomial method,the bilinear form of the equation,bilinear Bäcklund transformation,Lax pair and infinite conservation laws are derived,confirming the equation’s complete integrability in the context of the Lax pair.Subsequently,the nonlinear superposition formula of the equation is constructed based on the derived bilinear Bäcklund transformation and an array of infinite superposition soliton solutions of the equation are formulated using this nonlinear superposition formula.Lastly,leveraging the obtained bilinear equation,infinite superposition solutions of various functional types are constructed.Their dynamic characteristics are analyzed through illustrated solution images.It is noteworthy that this paper not only uncovers a multitude of properties through the Bell polynomial method but also derives both infinite linear and nonlinear superposition solutions,enriching the diversity of solutions,these aspects have not been previously explored in existing literature.
基金financially supported by the National Key R&D Program of China(Grant No.2023YFC3081200)the National Natural Science Foundation of China(Grant Nos.U21A20159 and 52179117).
文摘Contact detection is the most time-consuming stage in 3D discontinuous deformation analysis(3D-DDA)computation.Improving the efficiency of 3D-DDA is beneficial for its application in large-scale computing.In this study,aiming at the continuous-discontinuous simulation of 3D-DDA,a highly efficient contact detection strategy is proposed.Firstly,the global direct search(GDS)method is integrated into the 3D-DDA framework to address intricate contact scenarios.Subsequently,all geometric elements,including blocks,faces,edges,and vertices are divided into searchable and unsearchable parts.Contacts between unsearchable geometric elements would be directly inherited,while only searchable geometric elements are involved in contact detection.This strategy significantly reduces the number of geometric elements involved in contact detection,thereby markedly enhancing the computation efficiency.Several examples are adopted to demonstrate the accuracy and efficiency of the improved 3D-DDA method.The rock pillars with different mesh sizes are simulated under self-weight.The deformation and stress are consistent with the analytical results,and the smaller the mesh size,the higher the accuracy.The maximum speedup ratio is 38.46 for this case.Furthermore,the Brazilian splitting test on the discs with different flaws is conducted.The results show that the failure pattern of the samples is consistent with the results obtained by other methods and experiments,and the maximum speedup ratio is 266.73.Finally,a large-scale impact test is performed,and approximately 3.2 times enhanced efficiency is obtained.The proposed contact detection strategy significantly improves efficiency when the rock has not completely failed,which is more suitable for continuous-discontinuous simulation.
文摘The numerical simulation is based on the authors' high-order models with a dissipative term for nonlinear and dispersive wave in water of varying depth. Corresponding finite-difference equations and general conditions for open and fixed natural boundaries with an arbitrary reflection coefficient and phase shift are also given in this paper. The systematical tests of numerical simulation show that the theoretical models, the finite-difference algorithms and the boundary conditions can give good calculation results for the wave propagating in shallow and deep water with an arbitrary slope varying from gentle to steep.
基金This research was supported by the National Natural Science Foundation of China under Grant No.40333025.
文摘In this paper, the three-dimensional variational data assimilation scheme (3DVAR) in the mesoscale model version 5 (MM5) of the US Pennsylvania State University/National Center for Atmospheric Research is used to study the effect of assimilating the sea-wind data from QuikSCAT on the prediction of typhoon track and intensity. The case of Typhoon Dujuan (2003) is first tested and the results show appreciable improvements. Twelve other cases in 2003 are then evaluated. The assimilation of the QuikSCAT data produces significant impacts on the structure of Dujuan in terms of the horizontal and vertical winds, sea-level pressure and temperature at the initial time. With the assimilation, the 24-h (48-h) track prediction of 11 (10) out of the 12 typhoons is improved. The 24-h (48-h) prediction of typhoon intensity is also improved in 10 (9) of the 12 cases. These experiments therefore demonstrate that assimilation of the QuikSCAT sea-wind data can increase the accuracy of typhoon track and intensity predictions through modification of the initial fields associated with the typhoon.
基金Project(51038004) supported by the National Natural Science Foundation of China
文摘In order to verify the validity of finite element numerical simulation method for asphalt mixture, which consists of aggregates, mastic （where mastic is a kind of fine mixture composed of asphalt binder mixed with fines and fine aggregates） and air voids, based on three-dimensional （3D） heterogeneous specimen, X-ray computerized tomography （X-ray CT） was used to scan the asphalt specimens to obtain the real internal microstrnctures of asphalt mixture. CT images were reconstructed to build up 3D digital specimen, and the viscoelastic properties of mastic were described with Burgers model The uniaxial creep numerical simulations of three different levels of aggregate gradation were conducted. The simulation results agree well with the experimental results. The numerical simulation of asphalt mixture incorporated with real 3D microstructure based on finite element method is a promising application to conduct research of asphalt concrete. Additionally, this method can increase the mechanistic understanding of global viscoelastic properties of asphalt mixtures by linking the real 3D microstructure.
基金the support of the National Natural Science Foundation of China(42174147,42474155)the Scientific and Technological Innovation Projects of Laoshan Laboratory(LSKJ20220347)。
文摘Neutron well logging,using instruments equipped with neutron source and detectors(e.g.,^(3)He-tubes,Nal,BGO),plays a key role in lithological differentiation,porosity determination,and fluid property evaluation in the petroleum industry.The growing trend of multifu nctional neutron well logging,which enables simultaneous extraction of multiple reservoir characteristics,requiring high-performance detectors capable of withstanding high-temperature downhole conditions,limited space,and instrument vibrations,while also detecting multiple particle types.The Cs_(2)LiYCl_(6):Ce^(3+)(CLYC)elpasolite scintillator demonstrates excellent temperature resistance and detection efficiency,making it become a promising candidate for leading the development of the novel neutron-based double-particle logging technology.This study employed Monte Carlo simulations to generate equivalent gamma spectra and proposed a pulse shape discrimination simulation method based on theoretical analysis and probabilistic iteration.The performance of CLYC was compared to that of common detectors in terms of physical properties and detection efficiency.A double-particle pulsed neutron detection system for porosity determination was established,based on the count ratio of equivalent gamma rays from the range of 2.95-3.42 MeVee energy bins.Results showed that CLYC can effectively replace ^(3)He-tubes for porosity measurement,providing consistent responses.This study offers numerical simulation support for the design of future neutron well logging tools and the application of double-particle detectors in logging systems.
基金supported by the National Science and Technology Major Project,China(No.2017-III-0010-0036).
文摘The Secondary Air System(SAS)plays an important role in the safe operation and performance of aeroengines.The traditional 1D-3D coupling method loses information when used for secondary air systems,which affects the calculation accuracy.In this paper,a Cross-dimensional Data Transmission method(CDT)from 3D to 1D is proposed by introducing flow field uniformity into the data transmission.First,a uniformity index was established to quantify the flow field parameter distribution characteristics,and a uniformity index prediction model based on the locally weighted regression method(Lowess)was established to quickly obtain the flow field information.Then,an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation,and the calculation method was automatically determined according to the established criterion.Finally,a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution,which are then used to modify the selected parameters at the 1D-3D interface.Taking a typical disk cavity air system as an example,the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88%compared with the traditional 1D-3D coupling method.Furthermore,the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.
基金supported by the National Natural Science Foundation of China(Grant Nos.61274106,11175138,and 61601352)
文摘The fabrication process dependent effects on single event effects （SEEs） are investigated in a commercial silicon- germanium heterojunction bipolar transistor （SiGe HBT） using three-dimensional （3D） TCAD simulations. The influences of device structure and doping concentration on SEEs are discussed via analysis of current transient and charge collection induced by ions strike. The results show that the SEEs representation of current transient is different from representation of the charge collection for the same process parameters. To be specific, the area of C/S junction is the key parameter that affects charge collection of SEE. Both current transient and charge collection are dependent on the doping of collector and substrate. The base doping slightly influences transient currents of base, emitter, and collector terminals. However, the SEEs of SiGe HBT are hardly affected by the doping of epitaxial base and the content of Ge.
