Wind farm layout optimization is a critical challenge in renewable energy development,especially in regions with complex terrain.Micro-siting of wind turbines has a significant impact on the overall efficiency and eco...Wind farm layout optimization is a critical challenge in renewable energy development,especially in regions with complex terrain.Micro-siting of wind turbines has a significant impact on the overall efficiency and economic viability of wind farm,where the wake effect,wind speed,types of wind turbines,etc.,have an impact on the output power of the wind farm.To solve the optimization problem of wind farm layout under complex terrain conditions,this paper proposes wind turbine layout optimization using different types of wind turbines,the aim is to reduce the influence of the wake effect and maximize economic benefits.The linear wake model is used for wake flow calculation over complex terrain.Minimizing the unit energy cost is taken as the objective function,considering that the objective function is affected by cost and output power,which influence each other.The cost function includes construction cost,installation cost,maintenance cost,etc.Therefore,a bi-level constrained optimization model is established,in which the upper-level objective function is to minimize the unit energy cost,and the lower-level objective function is to maximize the output power.Then,a hybrid evolutionary algorithm is designed according to the characteristics of the decision variables.The improved genetic algorithm and differential evolution are used to optimize the upper-level and lower-level objective functions,respectively,these evolutionary operations search for the optimal solution as much as possible.Finally,taking the roughness of different terrain,wind farms of different scales and different types of wind turbines as research scenarios,the optimal deployment is solved by using the algorithm in this paper,and four algorithms are compared to verify the effectiveness of the proposed algorithm.展开更多
Given the power system balancing challenges induced by high-penetration renewable energy integration,this study systematically reviews international balancing mechanism practices and conducts an in-depth deconstructio...Given the power system balancing challenges induced by high-penetration renewable energy integration,this study systematically reviews international balancing mechanism practices and conducts an in-depth deconstruction of Germany’s balancing group mechanism(BGM).Building on this foundation,this research pioneers the integration of virtual power plants(VPPs)with the BGM in the Chinese context to overcome the limitations of traditional single-entity regulation models in flexibility provision and economic efficiency.A balancing responsibility framework centered on VPPs is innovatively proposed and a regional multi-entity collaboration and bi-level responsibility transfer architecture is constructed.This architecture enables cross-layer coordinated optimization of regional system costs and VPP revenues.The upper layer minimizes regional operational costs,whereas the lower layer enhances the operational revenues of VPPs through dynamic gaming between deviation regulation service income and penalty costs.Compared with traditional centralized regulation models,the proposed method reduces system operational costs by 29.1%in typical regional cases and increases VPP revenues by 24.9%.These results validate its dual optimization of system economics and participant incentives through market mechanisms,providing a replicable theoretical paradigm and practical pathway for designing balancing mechanisms in new power systems.展开更多
The current trends in forestry in Europe include the increased use of continuous cover forestry(CCF)and the increased availability of tree-level forest inventory data.Accordingly,recent literature suggests methodologi...The current trends in forestry in Europe include the increased use of continuous cover forestry(CCF)and the increased availability of tree-level forest inventory data.Accordingly,recent literature suggests methodologies for optimizing the harvest decisions at the tree level.Using tree-level optimization for all trees of the stand is computationally demanding.This study proposed a two-level optimization method for CCF where the harvest prescriptions are optimized at the tree level for only a part of the trees or the first cuttings.The higher-level algorithm optimizes the cutting years and the harvest rates of those diameter classes for which tree-level optimization is not used.The lower-level algorithm allocates the individually optimized trees to different cutting events.The most detailed problem formulations,employing much tree-level optimization,resulted in the highest net present value and longest optimization time.However,restricting tree-level optimization to the largest trees and first cuttings did not significantly alter the time,intensity,or type of first cutting.Computing times could also be shortened by applying accumulated knowledge from previous optimizations,implementing learning aspects in heuristic search,and optimizing the search algorithms for short computing time and good-quality solutions.展开更多
Recent studies of the space debris environment in Low Earth Orbit(LEO)have shown that the critical density of space debris has been reached in certain regions.The Active Debris Removal(ADR)mission,to mitigate the spac...Recent studies of the space debris environment in Low Earth Orbit(LEO)have shown that the critical density of space debris has been reached in certain regions.The Active Debris Removal(ADR)mission,to mitigate the space debris density and stabilize the space debris environment,has been considered as a most effective method.In this paper,a novel two-level optimization strategy for multi-debris removal mission in LEO is proposed,which includes the low-level and high-level optimization process.To improve the overall performance of the multi-debris active removal mission and obtain multiple Pareto-optimal solutions,the ADR mission is seen as a Time-Dependant Traveling Salesman Problem(TDTSP)with two objective functions to minimize the total mission duration and the total propellant consumption.The problem includes the sequence optimization to determine the sequence of removal of space debris and the transferring optimization to define the orbital maneuvers.Two optimization models for the two-level optimization strategy are built in solving the multi-debris removal mission,and the optimal Pareto solution is successfully obtained by using the non-dominated sorting genetic algorithm II(NSGA-II).Two test cases are presented,which show that the low level optimization strategy can successfully obtain the optimal sequences and the initial solution of the ADR mission and the high level optimization strategy can efficiently and robustly find the feasible optimal solution for long duration perturbed rendezvous problem.展开更多
An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level op...An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.展开更多
Background:Laser scanning and individual-tree detection are used increasingly in forest inventories.As a consequence,methods that optimize forest management at the level of individual trees will be gradually developed...Background:Laser scanning and individual-tree detection are used increasingly in forest inventories.As a consequence,methods that optimize forest management at the level of individual trees will be gradually developed and adopted.Results:The current study proposed a hierarchical two-level optimization method for tree-level planning where the cutting years are optimized at the higher level.The lower-level optimization allocates the trees to the cutting events in an optimal way.The higher-level optimization employed differential evolution whereas the lower-level problem was solved with the simulated annealing metaheuristic.The method was demonstrated with a 30 m30 m sample plot of planted Larix olgensis.The baseline case maximized the net present value as the only management objective.The solution suggested heavy thinning from above and a rotation length of 62 years.The baseline problem was enhanced to mixed stands where species diversity was used as another management objective.The method was also demonstrated in a problem that considered the complexity of stand structure,in addition to net present value.The objective variables that were used to measure complexity were the Shannon index(species diversity),Gini index(tree size diversity),and the index of Clark and Evans,which was used to describe the spatial distribution of trees.The article also presents a method to include natural advance regeneration in the optimization problem and optimize the parameters of simulated annealing simultaneously with the cutting years.Conclusions:The study showed that optimization approaches developed for forest-level planning can be adapted to problems where treatment prescriptions are required for individual trees.展开更多
In this paper,we consider a more general bi-level optimization problem,where the inner objective function is consisted of three convex functions,involving a smooth and two non-smooth functions.The outer objective func...In this paper,we consider a more general bi-level optimization problem,where the inner objective function is consisted of three convex functions,involving a smooth and two non-smooth functions.The outer objective function is a classical strongly convex function which may not be smooth.Motivated by the smoothing approaches,we modify the classical bi-level gradient sequential averaging method to solve the bi-level optimization problem.Under some mild conditions,we obtain the convergence rate of the generated sequence,and then based on the analysis framework of S-FISTA,we show the global convergence rate of the proposed algorithm.展开更多
In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the op...In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.展开更多
Metaheuristic algorithms,renowned for strong global search capabilities,are effective tools for solving complex optimization problems and show substantial potential in e-Health applications.This review provides a syst...Metaheuristic algorithms,renowned for strong global search capabilities,are effective tools for solving complex optimization problems and show substantial potential in e-Health applications.This review provides a systematic overview of recent advancements in metaheuristic algorithms and highlights their applications in e-Health.We selected representative algorithms published between 2019 and 2024,and quantified their influence using an entropy-weighted method based on journal impact factors and citation counts.CThe Harris Hawks Optimizer(HHO)demonstrated the highest early citation impact.The study also examined applications in disease prediction models,clinical decision support,and intelligent health monitoring.Notably,the Chaotic Salp Swarm Algorithm(CSSA)achieved 99.69% accuracy in detecting Novel Coronavirus Pneumonia.Future research should progress in three directions:improving theoretical reliability and performance predictability in medical contexts;designing more adaptive and deployable mechanisms for real-world systems;and integrating ethical,privacy,and technological considerations to enable precision medicine,digital twins,and intelligent medical devices.展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Based on the demands for crashworthiness and lightweight in the passive safety of transportation vehicles,metal-fiber reinforced polymer(FRP)hybrid thin-walled tubes(MFHTWTs)integrate the toughness,strength and lightw...Based on the demands for crashworthiness and lightweight in the passive safety of transportation vehicles,metal-fiber reinforced polymer(FRP)hybrid thin-walled tubes(MFHTWTs)integrate the toughness,strength and lightweight of two distinct material characteristics.MFHTWTs can achieve energy absorption through the coupling of material plastic deformation and fracture,demonstrating significant engineering value in passive safety.This review provides a comprehensive examination of the crashworthiness topology optimization of MFHTWTs,aiming to demonstrate that a deeply integrated approach combining topology and parameter opti-mization can realize an optimal design method for MFHTWTs,thereby maximizing the functional utilization of limited material.Firstly,the review highlights the crashworthiness topology optimization methods(CTOMs)based on thin-walled structures.With a particular focus on metal,the review discusses both the practical ap-plicability and limitations of CTOMs under crash conditions.Additionally,based on the methodology of the equivalent static load method(ESLM),the review emphasizes that topology optimization methods considering continuous fiber paths and multi-material interface connections are also applicable to the crashworthiness op-timization of MFHTWTs.Furthermore,to couple structural parameters and configuration characteristics,in-tegrated topology optimization methods,including parameter optimization,are proposed to provide a valuable reference for the global optimization of MFHTWTs.Thus,these methods can establish the mapping relationship between key parameters and the structural energy absorption capacity.展开更多
Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion...Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.展开更多
Optimization problems are prevalent in various fields of science and engineering,with several real-world applications characterized by high dimensionality and complex search landscapes.Starfish optimization algorithm(...Optimization problems are prevalent in various fields of science and engineering,with several real-world applications characterized by high dimensionality and complex search landscapes.Starfish optimization algorithm(SFOA)is a recently optimizer inspired by swarm intelligence,which is effective for numerical optimization,but it may encounter premature and local convergence for complex optimization problems.To address these challenges,this paper proposes the multi-strategy enhanced crested porcupine-starfish optimization algorithm(MCPSFOA).The core innovation of MCPSFOA lies in employing a hybrid strategy to improve SFOA,which integrates the exploratory mechanisms of SFOA with the diverse search capacity of the Crested Porcupine Optimizer(CPO).This synergy enhances MCPSFOA’s ability to navigate complex and multimodal search spaces.To further prevent premature convergence,MCPSFOA incorporates Lévy flight,leveraging its characteristic long and short jump patterns to enable large-scale exploration and escape from local optima.Subsequently,Gaussian mutation is applied for precise solution tuning,introducing controlled perturbations that enhance accuracy and mitigate the risk of insufficient exploitation.Notably,the population diversity enhancement mechanism periodically identifies and resets stagnant individuals,thereby consistently revitalizing population variety throughout the optimization process.MCPSFOA is rigorously evaluated on 24 classical benchmark functions(including high-dimensional cases),the CEC2017 suite,and the CEC2022 suite.MCPSFOA achieves superior overall performance with Friedman mean ranks of 2.208,2.310 and 2.417 on these benchmark functions,outperforming 11 state-of-the-art algorithms.Furthermore,the practical applicability of MCPSFOA is confirmed through its successful application to five engineering optimization cases,where it also yields excellent results.In conclusion,MCPSFOA is not only a highly effective and reliable optimizer for benchmark functions,but also a practical tool for solving real-world optimization problems.展开更多
In the conceptual design phase of the satellite thermal management system,components layout optimization and structural topology optimization of satellite panel can meet global and local thermal management requirement...In the conceptual design phase of the satellite thermal management system,components layout optimization and structural topology optimization of satellite panel can meet global and local thermal management requirements,respectively.However,achieving non-interfering coupling between these two optimization processes remains a challenge.An integrated layout-structure design method based on thermal metamaterials is proposed,which comprises two design stages.In the first stage,components layout optimization is conducted to maximize temperature uniformity within the satellite module,yielding a globally optimized layout with balanced thermal characteristics.In the second stage,topology optimization guided by the design principle of thermal metamaterials is implemented in critical local panel regions to satisfy differentiated heat transfer requirements of components with diverse functional and thermal sensitivity properties.The key innovation lies in utilizing thermal metamaterials as a mediator to synergistically couple global components layout optimization with local structural topology optimization,which enables customized local heat flux manipulation without interfering with the globally optimized temperature field derived from the layout optimization.The method introduces neither additional mass nor special materials,offering advantages of low cost,high reliability,and strong versatility.It provides a new solution paradigm for the design of passive thermal management systems in satellites.展开更多
Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
Optimization algorithms are crucial for solving NP-hard problems in engineering and computational sciences.Metaheuristic algorithms,in particular,have proven highly effective in complex optimization scenarios characte...Optimization algorithms are crucial for solving NP-hard problems in engineering and computational sciences.Metaheuristic algorithms,in particular,have proven highly effective in complex optimization scenarios characterized by high dimensionality and intricate variable relationships.The Mountain Gazelle Optimizer(MGO)is notably effective but struggles to balance local search refinement and global space exploration,often leading to premature convergence and entrapment in local optima.This paper presents the Improved MGO(IMGO),which integrates three synergistic enhancements:dynamic chaos mapping using piecewise chaotic sequences to boost explo-ration diversity;Opposition-Based Learning(OBL)with adaptive,diversity-driven activation to speed up convergence;and structural refinements to the position update mechanisms to enhance exploitation.The IMGO underwent a comprehensive evaluation using 52 standardised benchmark functions and seven engineering optimization problems.Benchmark evaluations showed that IMGO achieved the highest rank in best solution quality for 31 functions,the highest rank in mean performance for 18 functions,and the highest rank in worst-case performance for 14 functions among 11 competing algorithms.Statistical validation using Wilcoxon signed-rank tests confirmed that IMGO outperformed individual competitors across 16 to 50 functions,depending on the algorithm.At the same time,Friedman ranking analysis placed IMGO with an average rank of 4.15,compared to the baseline MGO’s 4.38,establishing the best overall performance.The evaluation of engineering problems revealed consistent improvements,including an optimal cost of 1.6896 for the welded beam design vs.MGO’s 1.7249,a minimum cost of 5885.33 for the pressure vessel design vs.MGO’s 6300,and a minimum weight of 2964.52 kg for the speed reducer design vs.MGO’s 2990.00 kg.Ablation studies identified OBL as the strongest individual contributor,whereas complete integration achieved superior performance through synergistic interactions among components.Computational complexity analysis established an O(T×N×5×f(P))time complexity,representing a 1.25×increase in fitness evaluation relative to the baseline MGO,validating the favorable accuracy-efficiency trade-offs for practical optimization applications.展开更多
Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified...Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified and flexible optimization framework that leverages metaheuristic algorithms to automatically optimize CNN configurations for IoT attack detection.Unlike conventional single-objective approaches,the proposed method formulates a global multi-objective fitness function that integrates accuracy,precision,recall,and model size(speed/model complexity penalty)with adjustable weights.This design enables both single-objective and weightedsum multi-objective optimization,allowing adaptive selection of optimal CNN configurations for diverse deployment requirements.Two representativemetaheuristic algorithms,GeneticAlgorithm(GA)and Particle Swarm Optimization(PSO),are employed to optimize CNNhyperparameters and structure.At each generation/iteration,the best configuration is selected as themost balanced solution across optimization objectives,i.e.,the one achieving themaximum value of the global objective function.Experimental validation on two benchmark datasets,Edge-IIoT and CIC-IoT2023,demonstrates that the proposed GA-and PSO-based models significantly enhance detection accuracy(94.8%–98.3%)and generalization compared with manually tuned CNN configurations,while maintaining compact architectures.The results confirm that the multi-objective framework effectively balances predictive performance and computational efficiency.This work establishes a generalizable and adaptive optimization strategy for deep learning-based IoT attack detection and provides a foundation for future hybrid metaheuristic extensions in broader IoT security applications.展开更多
The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous c...The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous computing networks.Finding an optimal computational resource for task offloading and then executing efficiently is a critical issue to achieve a trade-off between energy consumption and transmission delay.In this network,the task processed at fog nodes reduces transmission delay.Still,it increases energy consumption,while routing tasks to the cloud server saves energy at the cost of higher communication delay.Moreover,the order in which offloaded tasks are executed affects the system’s efficiency.For instance,executing lower-priority tasks before higher-priority jobs can disturb the reliability and stability of the system.Therefore,an efficient strategy of optimal computation offloading and task scheduling is required for operational efficacy.In this paper,we introduced a multi-objective and enhanced version of Cheeta Optimizer(CO),namely(MoECO),to jointly optimize the computation offloading and task scheduling in cloud-fog networks to minimize two competing objectives,i.e.,energy consumption and communication delay.MoECO first assigns tasks to the optimal computational nodes and then the allocated tasks are scheduled for processing based on the task priority.The mathematical modelling of CO needs improvement in computation time and convergence speed.Therefore,MoECO is proposed to increase the search capability of agents by controlling the search strategy based on a leader’s location.The adaptive step length operator is adjusted to diversify the solution and thus improves the exploration phase,i.e.,global search strategy.Consequently,this prevents the algorithm from getting trapped in the local optimal solution.Moreover,the interaction factor during the exploitation phase is also adjusted based on the location of the prey instead of the adjacent Cheetah.This increases the exploitation capability of agents,i.e.,local search capability.Furthermore,MoECO employs a multi-objective Pareto-optimal front to simultaneously minimize designated objectives.Comprehensive simulations in MATLAB demonstrate that the proposed algorithm obtains multiple solutions via a Pareto-optimal front and achieves an efficient trade-off between optimization objectives compared to baseline methods.展开更多
Optimization is the key to obtaining efficient utilization of resources in structural design.Due to the complex nature of truss systems,this study presents a method based on metaheuristic modelling that minimises stru...Optimization is the key to obtaining efficient utilization of resources in structural design.Due to the complex nature of truss systems,this study presents a method based on metaheuristic modelling that minimises structural weight under stress and frequency constraints.Two new algorithms,the Red Kite Optimization Algorithm(ROA)and Secretary Bird Optimization Algorithm(SBOA),are utilized on five benchmark trusses with 10,18,37,72,and 200-bar trusses.Both algorithms are evaluated against benchmarks in the literature.The results indicate that SBOA always reaches a lighter optimal.Designs with reducing structural weight ranging from 0.02%to 0.15%compared to ROA,and up to 6%–8%as compared to conventional algorithms.In addition,SBOA can achieve 15%–20%faster convergence speed and 10%–18%reduction in computational time with a smaller standard deviation over independent runs,which demonstrates its robustness and reliability.It is indicated that the adaptive exploration mechanism of SBOA,especially its Levy flight–based search strategy,can obviously improve optimization performance for low-and high-dimensional trusses.The research has implications in the context of promoting bio-inspired optimization techniques by demonstrating the viability of SBOA,a reliable model for large-scale structural design that provides significant enhancements in performance and convergence behavior.展开更多
Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introdu...Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.展开更多
基金supported by the National Natural Science Foundation of China[Grant No.12461035]Qinghai University Students Innovative Training Program Project[2024-QX-57].
文摘Wind farm layout optimization is a critical challenge in renewable energy development,especially in regions with complex terrain.Micro-siting of wind turbines has a significant impact on the overall efficiency and economic viability of wind farm,where the wake effect,wind speed,types of wind turbines,etc.,have an impact on the output power of the wind farm.To solve the optimization problem of wind farm layout under complex terrain conditions,this paper proposes wind turbine layout optimization using different types of wind turbines,the aim is to reduce the influence of the wake effect and maximize economic benefits.The linear wake model is used for wake flow calculation over complex terrain.Minimizing the unit energy cost is taken as the objective function,considering that the objective function is affected by cost and output power,which influence each other.The cost function includes construction cost,installation cost,maintenance cost,etc.Therefore,a bi-level constrained optimization model is established,in which the upper-level objective function is to minimize the unit energy cost,and the lower-level objective function is to maximize the output power.Then,a hybrid evolutionary algorithm is designed according to the characteristics of the decision variables.The improved genetic algorithm and differential evolution are used to optimize the upper-level and lower-level objective functions,respectively,these evolutionary operations search for the optimal solution as much as possible.Finally,taking the roughness of different terrain,wind farms of different scales and different types of wind turbines as research scenarios,the optimal deployment is solved by using the algorithm in this paper,and four algorithms are compared to verify the effectiveness of the proposed algorithm.
基金supported by the National Natural Science Foundation of China(no.72471087)Beijing Nova Program(no.20250484853)+1 种基金Beijing Natural Science Foundation(no.9242015)National Social Science Foundation of China(no.24&ZD111).
文摘Given the power system balancing challenges induced by high-penetration renewable energy integration,this study systematically reviews international balancing mechanism practices and conducts an in-depth deconstruction of Germany’s balancing group mechanism(BGM).Building on this foundation,this research pioneers the integration of virtual power plants(VPPs)with the BGM in the Chinese context to overcome the limitations of traditional single-entity regulation models in flexibility provision and economic efficiency.A balancing responsibility framework centered on VPPs is innovatively proposed and a regional multi-entity collaboration and bi-level responsibility transfer architecture is constructed.This architecture enables cross-layer coordinated optimization of regional system costs and VPP revenues.The upper layer minimizes regional operational costs,whereas the lower layer enhances the operational revenues of VPPs through dynamic gaming between deviation regulation service income and penalty costs.Compared with traditional centralized regulation models,the proposed method reduces system operational costs by 29.1%in typical regional cases and increases VPP revenues by 24.9%.These results validate its dual optimization of system economics and participant incentives through market mechanisms,providing a replicable theoretical paradigm and practical pathway for designing balancing mechanisms in new power systems.
基金supported by the KESTO project (Planning and implementation of the harvesting of climate-resilient continuous cover forests (CCF) using digitalization in North Karelia),Grant Number 41007-00241901funded by the European Regional Development Fund (ERDF)funding provided by University of Eastern Finland (including Kuopio University Hospital)
文摘The current trends in forestry in Europe include the increased use of continuous cover forestry(CCF)and the increased availability of tree-level forest inventory data.Accordingly,recent literature suggests methodologies for optimizing the harvest decisions at the tree level.Using tree-level optimization for all trees of the stand is computationally demanding.This study proposed a two-level optimization method for CCF where the harvest prescriptions are optimized at the tree level for only a part of the trees or the first cuttings.The higher-level algorithm optimizes the cutting years and the harvest rates of those diameter classes for which tree-level optimization is not used.The lower-level algorithm allocates the individually optimized trees to different cutting events.The most detailed problem formulations,employing much tree-level optimization,resulted in the highest net present value and longest optimization time.However,restricting tree-level optimization to the largest trees and first cuttings did not significantly alter the time,intensity,or type of first cutting.Computing times could also be shortened by applying accumulated knowledge from previous optimizations,implementing learning aspects in heuristic search,and optimizing the search algorithms for short computing time and good-quality solutions.
基金the Open Research Foundation of Science and Technology in Aerospace Flight Dynamics Laboratory of China(GF2018005).
文摘Recent studies of the space debris environment in Low Earth Orbit(LEO)have shown that the critical density of space debris has been reached in certain regions.The Active Debris Removal(ADR)mission,to mitigate the space debris density and stabilize the space debris environment,has been considered as a most effective method.In this paper,a novel two-level optimization strategy for multi-debris removal mission in LEO is proposed,which includes the low-level and high-level optimization process.To improve the overall performance of the multi-debris active removal mission and obtain multiple Pareto-optimal solutions,the ADR mission is seen as a Time-Dependant Traveling Salesman Problem(TDTSP)with two objective functions to minimize the total mission duration and the total propellant consumption.The problem includes the sequence optimization to determine the sequence of removal of space debris and the transferring optimization to define the orbital maneuvers.Two optimization models for the two-level optimization strategy are built in solving the multi-debris removal mission,and the optimal Pareto solution is successfully obtained by using the non-dominated sorting genetic algorithm II(NSGA-II).Two test cases are presented,which show that the low level optimization strategy can successfully obtain the optimal sequences and the initial solution of the ADR mission and the high level optimization strategy can efficiently and robustly find the feasible optimal solution for long duration perturbed rendezvous problem.
基金supported by the National Natural Science Foundation of China (No. 11172025 and No. 91116005)
文摘An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.
基金This research was financially supported by the Natural Science Foundation of China(No.U21A20244&No.32071758)the Fundamental Research Funds for the Central Universities of China(No.2572020BA01).
文摘Background:Laser scanning and individual-tree detection are used increasingly in forest inventories.As a consequence,methods that optimize forest management at the level of individual trees will be gradually developed and adopted.Results:The current study proposed a hierarchical two-level optimization method for tree-level planning where the cutting years are optimized at the higher level.The lower-level optimization allocates the trees to the cutting events in an optimal way.The higher-level optimization employed differential evolution whereas the lower-level problem was solved with the simulated annealing metaheuristic.The method was demonstrated with a 30 m30 m sample plot of planted Larix olgensis.The baseline case maximized the net present value as the only management objective.The solution suggested heavy thinning from above and a rotation length of 62 years.The baseline problem was enhanced to mixed stands where species diversity was used as another management objective.The method was also demonstrated in a problem that considered the complexity of stand structure,in addition to net present value.The objective variables that were used to measure complexity were the Shannon index(species diversity),Gini index(tree size diversity),and the index of Clark and Evans,which was used to describe the spatial distribution of trees.The article also presents a method to include natural advance regeneration in the optimization problem and optimize the parameters of simulated annealing simultaneously with the cutting years.Conclusions:The study showed that optimization approaches developed for forest-level planning can be adapted to problems where treatment prescriptions are required for individual trees.
文摘In this paper,we consider a more general bi-level optimization problem,where the inner objective function is consisted of three convex functions,involving a smooth and two non-smooth functions.The outer objective function is a classical strongly convex function which may not be smooth.Motivated by the smoothing approaches,we modify the classical bi-level gradient sequential averaging method to solve the bi-level optimization problem.Under some mild conditions,we obtain the convergence rate of the generated sequence,and then based on the analysis framework of S-FISTA,we show the global convergence rate of the proposed algorithm.
基金Supported by the National Natural Science Foundation of China(12071133)Natural Science Foundation of Henan Province(252300421993)Key Scientific Research Project of Higher Education Institutions in Henan Province(25B110005)。
文摘In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.
基金Supported by National Natural Science Foundation of China(Grant No.62506054)Natural Science Foundation of Chongqing,China(Grant Nos.CSTB2022NSCQ-MSX1571,CSTB2024NSCQ-MSX1118)+2 种基金the Science and Technology Research Program of Chongqing Municipal Education Commission(Grant Nos.KJQN202400841,KJZD-M202500804)The National Natural Science Foundation of China(Grant No.61976030)Chongqing Technology and Business University High-level Talent Research Initiation Project(Grant No.2256004).
文摘Metaheuristic algorithms,renowned for strong global search capabilities,are effective tools for solving complex optimization problems and show substantial potential in e-Health applications.This review provides a systematic overview of recent advancements in metaheuristic algorithms and highlights their applications in e-Health.We selected representative algorithms published between 2019 and 2024,and quantified their influence using an entropy-weighted method based on journal impact factors and citation counts.CThe Harris Hawks Optimizer(HHO)demonstrated the highest early citation impact.The study also examined applications in disease prediction models,clinical decision support,and intelligent health monitoring.Notably,the Chaotic Salp Swarm Algorithm(CSSA)achieved 99.69% accuracy in detecting Novel Coronavirus Pneumonia.Future research should progress in three directions:improving theoretical reliability and performance predictability in medical contexts;designing more adaptive and deployable mechanisms for real-world systems;and integrating ethical,privacy,and technological considerations to enable precision medicine,digital twins,and intelligent medical devices.
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
基金Supported by National Natural Science Foundation of China(Grant Nos.52202431,52172353).
文摘Based on the demands for crashworthiness and lightweight in the passive safety of transportation vehicles,metal-fiber reinforced polymer(FRP)hybrid thin-walled tubes(MFHTWTs)integrate the toughness,strength and lightweight of two distinct material characteristics.MFHTWTs can achieve energy absorption through the coupling of material plastic deformation and fracture,demonstrating significant engineering value in passive safety.This review provides a comprehensive examination of the crashworthiness topology optimization of MFHTWTs,aiming to demonstrate that a deeply integrated approach combining topology and parameter opti-mization can realize an optimal design method for MFHTWTs,thereby maximizing the functional utilization of limited material.Firstly,the review highlights the crashworthiness topology optimization methods(CTOMs)based on thin-walled structures.With a particular focus on metal,the review discusses both the practical ap-plicability and limitations of CTOMs under crash conditions.Additionally,based on the methodology of the equivalent static load method(ESLM),the review emphasizes that topology optimization methods considering continuous fiber paths and multi-material interface connections are also applicable to the crashworthiness op-timization of MFHTWTs.Furthermore,to couple structural parameters and configuration characteristics,in-tegrated topology optimization methods,including parameter optimization,are proposed to provide a valuable reference for the global optimization of MFHTWTs.Thus,these methods can establish the mapping relationship between key parameters and the structural energy absorption capacity.
文摘Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.
基金supported by the National Natural Science Foundation of China(Grant No.12402139,No.52368070)supported by Hainan Provincial Natural Science Foundation of China(Grant No.524QN223)+3 种基金Scientific Research Startup Foundation of Hainan University(Grant No.RZ2300002710)State Key Laboratory of Structural Analysis,Optimization and CAE Software for Industrial Equipment,Dalian University of Technology(Grant No.GZ24107)the Horizontal Research Project(Grant No.HD-KYH-2024022)Innovative Research Projects for Postgraduate Students in Hainan Province(Grant No.Hys2025-217).
文摘Optimization problems are prevalent in various fields of science and engineering,with several real-world applications characterized by high dimensionality and complex search landscapes.Starfish optimization algorithm(SFOA)is a recently optimizer inspired by swarm intelligence,which is effective for numerical optimization,but it may encounter premature and local convergence for complex optimization problems.To address these challenges,this paper proposes the multi-strategy enhanced crested porcupine-starfish optimization algorithm(MCPSFOA).The core innovation of MCPSFOA lies in employing a hybrid strategy to improve SFOA,which integrates the exploratory mechanisms of SFOA with the diverse search capacity of the Crested Porcupine Optimizer(CPO).This synergy enhances MCPSFOA’s ability to navigate complex and multimodal search spaces.To further prevent premature convergence,MCPSFOA incorporates Lévy flight,leveraging its characteristic long and short jump patterns to enable large-scale exploration and escape from local optima.Subsequently,Gaussian mutation is applied for precise solution tuning,introducing controlled perturbations that enhance accuracy and mitigate the risk of insufficient exploitation.Notably,the population diversity enhancement mechanism periodically identifies and resets stagnant individuals,thereby consistently revitalizing population variety throughout the optimization process.MCPSFOA is rigorously evaluated on 24 classical benchmark functions(including high-dimensional cases),the CEC2017 suite,and the CEC2022 suite.MCPSFOA achieves superior overall performance with Friedman mean ranks of 2.208,2.310 and 2.417 on these benchmark functions,outperforming 11 state-of-the-art algorithms.Furthermore,the practical applicability of MCPSFOA is confirmed through its successful application to five engineering optimization cases,where it also yields excellent results.In conclusion,MCPSFOA is not only a highly effective and reliable optimizer for benchmark functions,but also a practical tool for solving real-world optimization problems.
基金funded by State Key Laboratory of MicroSpacecraft Rapid Design and Intelligent Cluster,China(No.MS01240104)the Youth Program of the Self-Innovation Science Fund,China(No.ZK2023-41)from the National University of Defense Technology(NUDT)China and the Postgraduate Scientific Research Innovation Project of Hunan Province,China(No.CX20240155)。
文摘In the conceptual design phase of the satellite thermal management system,components layout optimization and structural topology optimization of satellite panel can meet global and local thermal management requirements,respectively.However,achieving non-interfering coupling between these two optimization processes remains a challenge.An integrated layout-structure design method based on thermal metamaterials is proposed,which comprises two design stages.In the first stage,components layout optimization is conducted to maximize temperature uniformity within the satellite module,yielding a globally optimized layout with balanced thermal characteristics.In the second stage,topology optimization guided by the design principle of thermal metamaterials is implemented in critical local panel regions to satisfy differentiated heat transfer requirements of components with diverse functional and thermal sensitivity properties.The key innovation lies in utilizing thermal metamaterials as a mediator to synergistically couple global components layout optimization with local structural topology optimization,which enables customized local heat flux manipulation without interfering with the globally optimized temperature field derived from the layout optimization.The method introduces neither additional mass nor special materials,offering advantages of low cost,high reliability,and strong versatility.It provides a new solution paradigm for the design of passive thermal management systems in satellites.
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
文摘Optimization algorithms are crucial for solving NP-hard problems in engineering and computational sciences.Metaheuristic algorithms,in particular,have proven highly effective in complex optimization scenarios characterized by high dimensionality and intricate variable relationships.The Mountain Gazelle Optimizer(MGO)is notably effective but struggles to balance local search refinement and global space exploration,often leading to premature convergence and entrapment in local optima.This paper presents the Improved MGO(IMGO),which integrates three synergistic enhancements:dynamic chaos mapping using piecewise chaotic sequences to boost explo-ration diversity;Opposition-Based Learning(OBL)with adaptive,diversity-driven activation to speed up convergence;and structural refinements to the position update mechanisms to enhance exploitation.The IMGO underwent a comprehensive evaluation using 52 standardised benchmark functions and seven engineering optimization problems.Benchmark evaluations showed that IMGO achieved the highest rank in best solution quality for 31 functions,the highest rank in mean performance for 18 functions,and the highest rank in worst-case performance for 14 functions among 11 competing algorithms.Statistical validation using Wilcoxon signed-rank tests confirmed that IMGO outperformed individual competitors across 16 to 50 functions,depending on the algorithm.At the same time,Friedman ranking analysis placed IMGO with an average rank of 4.15,compared to the baseline MGO’s 4.38,establishing the best overall performance.The evaluation of engineering problems revealed consistent improvements,including an optimal cost of 1.6896 for the welded beam design vs.MGO’s 1.7249,a minimum cost of 5885.33 for the pressure vessel design vs.MGO’s 6300,and a minimum weight of 2964.52 kg for the speed reducer design vs.MGO’s 2990.00 kg.Ablation studies identified OBL as the strongest individual contributor,whereas complete integration achieved superior performance through synergistic interactions among components.Computational complexity analysis established an O(T×N×5×f(P))time complexity,representing a 1.25×increase in fitness evaluation relative to the baseline MGO,validating the favorable accuracy-efficiency trade-offs for practical optimization applications.
文摘Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified and flexible optimization framework that leverages metaheuristic algorithms to automatically optimize CNN configurations for IoT attack detection.Unlike conventional single-objective approaches,the proposed method formulates a global multi-objective fitness function that integrates accuracy,precision,recall,and model size(speed/model complexity penalty)with adjustable weights.This design enables both single-objective and weightedsum multi-objective optimization,allowing adaptive selection of optimal CNN configurations for diverse deployment requirements.Two representativemetaheuristic algorithms,GeneticAlgorithm(GA)and Particle Swarm Optimization(PSO),are employed to optimize CNNhyperparameters and structure.At each generation/iteration,the best configuration is selected as themost balanced solution across optimization objectives,i.e.,the one achieving themaximum value of the global objective function.Experimental validation on two benchmark datasets,Edge-IIoT and CIC-IoT2023,demonstrates that the proposed GA-and PSO-based models significantly enhance detection accuracy(94.8%–98.3%)and generalization compared with manually tuned CNN configurations,while maintaining compact architectures.The results confirm that the multi-objective framework effectively balances predictive performance and computational efficiency.This work establishes a generalizable and adaptive optimization strategy for deep learning-based IoT attack detection and provides a foundation for future hybrid metaheuristic extensions in broader IoT security applications.
基金appreciation to the Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R384)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous computing networks.Finding an optimal computational resource for task offloading and then executing efficiently is a critical issue to achieve a trade-off between energy consumption and transmission delay.In this network,the task processed at fog nodes reduces transmission delay.Still,it increases energy consumption,while routing tasks to the cloud server saves energy at the cost of higher communication delay.Moreover,the order in which offloaded tasks are executed affects the system’s efficiency.For instance,executing lower-priority tasks before higher-priority jobs can disturb the reliability and stability of the system.Therefore,an efficient strategy of optimal computation offloading and task scheduling is required for operational efficacy.In this paper,we introduced a multi-objective and enhanced version of Cheeta Optimizer(CO),namely(MoECO),to jointly optimize the computation offloading and task scheduling in cloud-fog networks to minimize two competing objectives,i.e.,energy consumption and communication delay.MoECO first assigns tasks to the optimal computational nodes and then the allocated tasks are scheduled for processing based on the task priority.The mathematical modelling of CO needs improvement in computation time and convergence speed.Therefore,MoECO is proposed to increase the search capability of agents by controlling the search strategy based on a leader’s location.The adaptive step length operator is adjusted to diversify the solution and thus improves the exploration phase,i.e.,global search strategy.Consequently,this prevents the algorithm from getting trapped in the local optimal solution.Moreover,the interaction factor during the exploitation phase is also adjusted based on the location of the prey instead of the adjacent Cheetah.This increases the exploitation capability of agents,i.e.,local search capability.Furthermore,MoECO employs a multi-objective Pareto-optimal front to simultaneously minimize designated objectives.Comprehensive simulations in MATLAB demonstrate that the proposed algorithm obtains multiple solutions via a Pareto-optimal front and achieves an efficient trade-off between optimization objectives compared to baseline methods.
文摘Optimization is the key to obtaining efficient utilization of resources in structural design.Due to the complex nature of truss systems,this study presents a method based on metaheuristic modelling that minimises structural weight under stress and frequency constraints.Two new algorithms,the Red Kite Optimization Algorithm(ROA)and Secretary Bird Optimization Algorithm(SBOA),are utilized on five benchmark trusses with 10,18,37,72,and 200-bar trusses.Both algorithms are evaluated against benchmarks in the literature.The results indicate that SBOA always reaches a lighter optimal.Designs with reducing structural weight ranging from 0.02%to 0.15%compared to ROA,and up to 6%–8%as compared to conventional algorithms.In addition,SBOA can achieve 15%–20%faster convergence speed and 10%–18%reduction in computational time with a smaller standard deviation over independent runs,which demonstrates its robustness and reliability.It is indicated that the adaptive exploration mechanism of SBOA,especially its Levy flight–based search strategy,can obviously improve optimization performance for low-and high-dimensional trusses.The research has implications in the context of promoting bio-inspired optimization techniques by demonstrating the viability of SBOA,a reliable model for large-scale structural design that provides significant enhancements in performance and convergence behavior.
基金funded by the Malaysian Ministry of Higher Education through the Fundamental Research Grant Scheme(FRGS/1/2024/ICT02/UCSI/02/1).
文摘Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.
