This study investigates the complex heat transfer dynamics inmultilayer bifacial photovoltaic(bPV)solar modules under spectrally resolved solar irradiation.A novel numericalmodel is developed to incorporate internal h...This study investigates the complex heat transfer dynamics inmultilayer bifacial photovoltaic(bPV)solar modules under spectrally resolved solar irradiation.A novel numericalmodel is developed to incorporate internal heat generation resulting from optical absorption,grounded in the physical equations governing light-matter interactions within the module’smultilayer structure.The model accounts for reflection and transmission at each interface between adjacent layers,as well as absorption within individual layers,using the wavelength-dependent dielectric properties of constituent materials.These properties are used to calculate the spectral reflectance,transmittance,and absorption coefficients,enabling precise quantification of internal heat sources from irradiance incidents on both the front and rear surfaces of the module.The study further examines the influence of irradiance reflection on thermal behavior,evaluates the thermal impact of various supporting materials placed beneath the module,and analyzes the role of albedo in modifying heat distribution.By incorporating spectrally resolved heat generation across each layer often simplified or omitted in conventional models,the proposed approach enhances physical accuracy.The transient heat equation is solved using a one-dimensional finite difference(FD)method to produce detailed temperature profiles under multiple operating scenarios,including Standard Test Conditions(STC),Bifacial Standard Test Conditions(BSTC),Normal Operating Cell Temperature(NOCT),and Bifacial NOCT(BNOCT).The results offer valuable insights into the interplay between optical and thermal phenomena in bifacial systems,informing the design and optimization of more efficient photovoltaic technologies.展开更多
Electromagnetic interference,which necessitates the rapid advancement of substances with exceptional capabilities for bsorbing electromagnetic waves,is of urgent concern in contemporary society.In this work,CoFe_(2)O_...Electromagnetic interference,which necessitates the rapid advancement of substances with exceptional capabilities for bsorbing electromagnetic waves,is of urgent concern in contemporary society.In this work,CoFe_(2)O_(4)/residual carbon from coal gasification fine slag(CFO/RC)composites were created using a novel hydrothermal method.Various mechanisms for microwave absorption,including conductive loss,natural resonance,interfacial dipole polarization,and magnetic flux loss,are involved in these composites.Consequently,compared with pure residual carbon materials,this composite offers superior capabilities in microwave absorption.At 7.76GHz,the CFO/RC-2 composite achieves an impressive minimum reflection loss(RL_(min))of-43.99 dB with a thickness of 2.44 mm.Moreover,CFO/RC-3 demonstrates an effective absorption bandwidth(EAB)of up to 4.16 GHz,accompanied by a thickness of 1.18mm.This study revealed the remarkable capability of the composite to diminish electromagnetic waves,providing a new generation method for microwave absorbing materials of superior quality.展开更多
A novel porous shock absorption layer is put forward in this study, and the shock absorption performance of the porous shock absorption layer is evaluated based on three-dimensional pseudo-static analysis. The modifie...A novel porous shock absorption layer is put forward in this study, and the shock absorption performance of the porous shock absorption layer is evaluated based on three-dimensional pseudo-static analysis. The modified reaction acceleration method is adopted and validated in the three-dimensional model. Seven ground motions are selected and the peak ground acceleration is adjusted to 0.2 g, 0.4 g and 0.6 g. The impact of the void ratio and thickness of the porous shock absorption layer is studied, while the surrounding rock grade and tunnel depth are also investigated. The numerical results show that the porous shock absorption layer has good shock absorption performance and can effectively reduce the maximum internal force of the secondary lining, but it cannot reduce the maximum horizontal relative displacement of the secondary lining. The circumferential rubber strip in the porous shock absorption layer will reduce shock absorption performance. The results of parameter analysis indicate that the shock absorption performance of the porous shock absorption layer increases with the increase of the void ratio and thickness, and it has good shock absorption performance under different surrounding rock grades and tunnel depths.展开更多
Interlayer engineering of two-dimensional structural materials provides unique advantages for tuning the electromagnetic properties of metal oxides,injecting unlimited energy into the design of advanced two-dimensiona...Interlayer engineering of two-dimensional structural materials provides unique advantages for tuning the electromagnetic properties of metal oxides,injecting unlimited energy into the design of advanced two-dimensional metal oxide electromagnetic wave absorbers.In this study,Manganese dioxide intercalated with alkali metal ions was prepared by a simple molten salt method.The pre-intercalation of ions not only enhances the polarization loss at the heterogeneous interface between cations(point sites)and man-ganese dioxide(face sites)but also alters the energy band structure of manganese oxide and enhances its electrical conductivity,which in turn enhances the conductive loss of the manganese dioxide.Due to the synergistic effect of multiple polarizations and conductive losses,NaMO exhibits superb electromag-netic wave absorption properties and an effective absorption bandwidth of 5.36 GHz at thinner matched thicknesses.In addition,the RCS simulation result further verifies the excellent electromagnetic wave ab-sorption capability of NaMO.Under the positive incidence of electromagnetic waves,the electromagnetic wave reflection intensity of the metal plate coated with NaMO is effectively reduced.Finally,this work establishes a new way to modulate the electromagnetic properties.展开更多
Based on the demand of sintering/pelleting flue gas ultra-low emission,a semi-dry method using a spray dryer absorber (SDA) combined with O3 oxidation was proposed for simultaneous removal of SO2 and NO.Effects of O3 ...Based on the demand of sintering/pelleting flue gas ultra-low emission,a semi-dry method using a spray dryer absorber (SDA) combined with O3 oxidation was proposed for simultaneous removal of SO2 and NO.Effects of O3 injection site,O3/NO molar ratio,and spray tower temperature on the removal efficiencies were investigated.It was revealed that both desulfurization and denitrification efficiencies could reach to 85%under the conditions of setting O3 injection site inside of tower,O3/NO molar ratio 1.8,spray tower temperature 85°C,Ca/(S+2N) molar ratio 2.5 and slurry flow rate 300 m L/hr.CaSO3/Ca(OH)2 mixture slurry was used as absorbent to simulate operating conditions in iron and steel industry.The result shows that the addition of CaSO3 weakens both removal efficiencies.In addition,the reaction mechanism of simultaneous removal of SO2 and NO using SDA combined with O3 oxidation was proposed.展开更多
The control of macrosegregation is still a difficult problem for the production of large steel ingots.In order to develop new techniques for producing low-macrosegregation and high-quality steel ingots,the effect of t...The control of macrosegregation is still a difficult problem for the production of large steel ingots.In order to develop new techniques for producing low-macrosegregation and high-quality steel ingots,the effect of the heat absorption method(HAM)used by the inorganic material rods to cool the liquid steel on the formation of macrosegregation during solidification of a 5-t GCr15SiMn bearing steel ingot was studied using experiment and mathematical simulation.The inorganic material was a mixture of CaF2 and CaO.The levels of macrosegregation in the longitudinal sections of two ingots with and without HAM were compared.Experimental results showed that the application of HAM reduced the positive segregation in the upper part of the ingot and the negative segregation in the lower part.The levels of carbon segregation along the longitudinal centerline and horizontal direction at different heights were all alleviated and the fluctuation of carbon segregation was significantly reduced.The simulation results confirmed that the melting and floating of the inorganic material could carry the sensible heat to the top of the liquid steel quickly.This leads to the acceleration of the cooling rate of the liquid steel,thereby alleviating the level of macrosegregation.展开更多
For physical ozone absorption without reaction,two parametric estimation methods,i.e.the common linear least square fitting and non-linear Simplex search methods,were applied,respectively,to determine the ozone mass t...For physical ozone absorption without reaction,two parametric estimation methods,i.e.the common linear least square fitting and non-linear Simplex search methods,were applied,respectively,to determine the ozone mass transfer coefficient during absorption and both methods give almost the same mass transfer coefficient.While for chemical absorption with ozone decomposition reaction,the common linear least square fitting method is not applicable for the evaluation of ozone mass transfer coefficient due to the difficulty of model linearization for describing ozone concentration dissolved in water.The nonlinear Simplex method obtains the mass transfer coefficient by minimizing the sum of the differences between the simulated and experimental ozone concentration during the whole absorption process,without the limitation of linear relationship between the dissolved ozone concentration and absorption time during the initial stage of absorption.Comparison of the ozone concentration profiles between the simulation and experimental data demonstrates that Simplex method may determine ozone mass transfer coefficient during absorption in an accurate and high efficiency way with wide applicability.展开更多
Observing a telluric standard star for correcting the telluric absorption lines of spectrum will take a significant amount of precious telescope time,especially in the long-term spectral monitoring project.Beyond that...Observing a telluric standard star for correcting the telluric absorption lines of spectrum will take a significant amount of precious telescope time,especially in the long-term spectral monitoring project.Beyond that,it is difficult to select a suitable telluric standard star near in both time and airmass to the scientific object.In this paper,we present a method of correcting the telluric absorption lines by combining the advantages of long slit spectroscopy.By rotating the slit,we observed the scientific object and a nearby comparison star in one exposure,so that the spectra of both objects should have the same telluric transmission spectrum.The telluric transmission spectrum was constructed by dividing the observed spectrum of the comparison star by its stellar template,and was used to correct the telluric absorption lines of the scientific object.Using the long slit spectrograph of the Lijiang 2.4-meter telescope,we designed a long-term spectroscopic observation strategy,and finished a four-year spectroscopic monitoring for a pair of objects(an active galactic nucleus and a non-varying comparison star).We applied this method to correct the telluric absorption lines of the long-term monitored spectra by the Lijiang 2.4-meter telescope,and investigated the variation of the telluric absorptions at Lijiang Observatory.We found that the telluric absorption transparency is mainly modulated by the seasonal variability of the relative humidity,airmass and seeing.Using the scatter of the [O Ⅲ] λ5007 fluxes emitted from the narrow-line region of active galactic nuclei as an indicator,we found that the correction accuracy of the telluric absorption lines is 1%.展开更多
As concepts closely related to microwave absorption properties,impedance matching and phase matching were rarely combined with material parameters to regulate properties and explore related mechanisms.In this work,red...As concepts closely related to microwave absorption properties,impedance matching and phase matching were rarely combined with material parameters to regulate properties and explore related mechanisms.In this work,reduction–diffusion method was innovatively applied to synthesize rare earth alloy Y_(2)Fe_(17).In order to regulate the electromagnetic parameters of absorbers,the Y_(2)Fe_(17)N_(3-δ)particles were coated with silica(Y_(2)Fe_(17)N_(3-δ)@SiO_(2))and absorbers with different volume fractions were prepared.The relationship between impedance matching,matching thickness,and the strongest reflection loss peak(RLmin)was presented obviously.Compared to the microwave absorption properties of Y_(2)Fe_(17)N_(3-δ)/PU absorber,Y_(2)Fe_(17)N_(3-δ)@SiO_(2)/PU absorbers are more conducive to the realization of microwave absorption material standards which are thin thickness,light weight,strong absorbing intensity,and broad bandwidth.Based on microwave frequency bands,the microwave absorption properties of the absorbers were analyzed and the related parameters were listed.As an important parameter related to perfect matching,reflection factor(√ε_(r)/μ_(r))was discussed combined with microwave amplitude attenuation.According to the origin and mathematical model of bandwidth,the formula of EAB(RL<-10 dB)was derived and simplified.The calculated bandwidths agreed well with experimental results.展开更多
In this paper, the authors investigated the feasibility of near-infrared to measure sugar at cotton fibre. The simple regression equations are generated by respectively correlating thc absorption data(by using 1640nm ...In this paper, the authors investigated the feasibility of near-infrared to measure sugar at cotton fibre. The simple regression equations are generated by respectively correlating thc absorption data(by using 1640nm and 2100nm wavelengths) with sugar( glucose, fructose and sucrose) and the regression modes possess a high coefficient of correlation. The differences for absorption of various sugars at some (?)velengths are diseussed.展开更多
This paper discusses the principle and mathematical method to measure the phase fractions of multiphase flows by using a dual-energy gamma-ray system. The dual-energy gamma-ray device is composed of radioactive isotop...This paper discusses the principle and mathematical method to measure the phase fractions of multiphase flows by using a dual-energy gamma-ray system. The dual-energy gamma-ray device is composed of radioactive isotopes of 241Am and 137Cs with emission energies of 59.5 keV and 662 keV respectively. A rational method to calibrate the absorption coefficient was introduced in detail. The statistical error has been analyzed on the basis of the accurate absorption coefficient which enables determination phrase fractions almost independent of the flow regime. Improvement has been achieved on the measurement accuracy of phase fractions.展开更多
The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy...The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy absorption and its distribution in homogeneousand layered homogenous lossy dielectric spheres are presented,and a comparison of these resultswith analytical solution is given.The calculation is carried out for dielectric cylinder on conduct-ing ground as well,and the results are compared with the image theory.All the computationsshew that the finite-difference time-domain method can give satisfactory results.展开更多
The S K-shell near-edge x-ray absorption fine structure spectra of solid CS_(2) have been calculated by means of the multiple-scattering cluster method.The results show the existence of two kinds of absorption spectra...The S K-shell near-edge x-ray absorption fine structure spectra of solid CS_(2) have been calculated by means of the multiple-scattering cluster method.The results show the existence of two kinds of absorption spectra which correspond to single-bond(C-S)and double-bond(C=S),respectively,and their superposition of the two spectra fits the experimental spectrum well.Our calculation supports the zigzag chain model of solid CS_(2) with C-C distance of 3.60±0.01Å.展开更多
A series of high oil-absorption resins with low cross-linking degree were synthesized by suspension polymerization using stearyl methacrylate(SMA),2-Ethylhexyl methacrylate(EHMA),and styrene(St)as monomers.Response su...A series of high oil-absorption resins with low cross-linking degree were synthesized by suspension polymerization using stearyl methacrylate(SMA),2-Ethylhexyl methacrylate(EHMA),and styrene(St)as monomers.Response surface methodology(RSM)with central composite design(CCD)was also applied to determine the optimal parameters that are mainly known to affect their synthesis.Thus,the effects of the monomer mass ratio(EHMA:SMA),the rigid monomer(St)dosage,the porous agent(acetone)dosage,and their pairwise interaction on the resin's oil-absorption capacity were analyzed,highlighting PSES-R_(2) as the resin with the optimum performance.The pure oil-absorption rates of PSES-R_(2) for gasoline,diesel,and kerosene were 11.19 g·g^(-1),16.25 g·g^(-1),and 14.84 g·g^(-1),respectively,while the oil removal rates from oily wastewater were 98.82%,65.11%,and 99.63%,respectively.展开更多
The enhanced optical absorption measured by Constant Photocurrent Method (CPM) of hydrogenated nanocrystalline silicon thin films is due mainly to bulk and/or surface light scattering effects. A new numerical method i...The enhanced optical absorption measured by Constant Photocurrent Method (CPM) of hydrogenated nanocrystalline silicon thin films is due mainly to bulk and/or surface light scattering effects. A new numerical method is presented to calculate both true optical absorption and scattering coefficient from CPM absorption spectra of nanotextured nano-crystalline silicon films. Bulk and surface light scattering contributions can be unified through the correlation obtained between the scattering coefficient and surface roughness obtained using our method.展开更多
In vitro experiment using excised skin has been valuable for studying the mechanism of percutaneous absorption. Based on previously established static diffusion cell system in this laboratory, a novel model-peifused g...In vitro experiment using excised skin has been valuable for studying the mechanism of percutaneous absorption. Based on previously established static diffusion cell system in this laboratory, a novel model-peifused glass diffusion cell system is desboed. The results of initial comporative study on percutaneous absorption between glass perfused diffusion cell and static diffusion cell, ih vitro and in vivo permeation as well as factors affecting permeation with seven radiolabelled chemicals are presented. The results demonstrate that the peifused diffusion cell system, which used a perfusion nuid betow the suiface of skin to take up the materials which penetrated the skin, is more similar to physiologic condition,convenient and automatic than that of the static cell. It well predicts the in vivo percutaneous absorption if appropriate areptor fluid is chosen. The results also show that the selection of receptor fluid is critical for in vitro permeation of chemicals with different soubility展开更多
High-pressure research has emerged as a pivotal approach for advancing our understanding and development of optoelectronic materials,which are vital for a wide range of applications,including photovoltaics,light-emitt...High-pressure research has emerged as a pivotal approach for advancing our understanding and development of optoelectronic materials,which are vital for a wide range of applications,including photovoltaics,light-emitting devices,and photodetectors.This review highlights various in situ characterization methods employed in high-pressure research to investigate the optical,electronic,and structural properties of optoelectronic materials.We explore the advances that have been made in techniques such as X-ray diffraction,absorption spectroscopy,nonlinear optics,photoluminescence spectroscopy,Raman spectroscopy,and photoresponse measurement,emphasizing how these methods have enhanced the elucidation of structural transitions,bandgap modulation,performance optimization,and carrier dynamics engineering.These insights underscore the pivotal role of high-pressure techniques in optimizing and tailoring optoelectronic materials for future applications.展开更多
The sound absorption coefficients of wood and wood boards for five eucalypt species (Eucalyptus urophylla, Euca-lyptus urophylla E. grandis, Eucalyptus urophylla E. tereticornis, Eucalyptus urophylla E. camaldulensis ...The sound absorption coefficients of wood and wood boards for five eucalypt species (Eucalyptus urophylla, Euca-lyptus urophylla E. grandis, Eucalyptus urophylla E. tereticornis, Eucalyptus urophylla E. camaldulensis and Eucalyptus cloeziana) that were collected from plantation in Dongmen Forestry Center of Guangxi Province, China were tested with stand-ing wave method and their sound absorption properties were also compared. The results showed that the sound absorption co-efficients of the five eucalypt wood species did not change evidently below 1000 Hz, but above 1000 Hz their sound absorption coefficients increased with the increasing frequency. The difference in sound absorption coefficient among five species of eucalypt wood is not evident at the tested frequency range (200-2000 Hz), but the sound absorption property of Eucalyptus urophylla at low frequency is better than that of other four species. The sound absorption coefficient of the tangential-sawn board is higher than that of the radial-sawn board. The sound absorption property of eucalypt wood of 0.5 cm in thickness is much better than that of 1.0 cm in thickness. It is concluded that wood sound absorption properties of eucalypts are affected by their board thickness and the type of sawn timber within the testing frequency, but the variance of wood sound absorption property among the five tested species is not significant.展开更多
文摘This study investigates the complex heat transfer dynamics inmultilayer bifacial photovoltaic(bPV)solar modules under spectrally resolved solar irradiation.A novel numericalmodel is developed to incorporate internal heat generation resulting from optical absorption,grounded in the physical equations governing light-matter interactions within the module’smultilayer structure.The model accounts for reflection and transmission at each interface between adjacent layers,as well as absorption within individual layers,using the wavelength-dependent dielectric properties of constituent materials.These properties are used to calculate the spectral reflectance,transmittance,and absorption coefficients,enabling precise quantification of internal heat sources from irradiance incidents on both the front and rear surfaces of the module.The study further examines the influence of irradiance reflection on thermal behavior,evaluates the thermal impact of various supporting materials placed beneath the module,and analyzes the role of albedo in modifying heat distribution.By incorporating spectrally resolved heat generation across each layer often simplified or omitted in conventional models,the proposed approach enhances physical accuracy.The transient heat equation is solved using a one-dimensional finite difference(FD)method to produce detailed temperature profiles under multiple operating scenarios,including Standard Test Conditions(STC),Bifacial Standard Test Conditions(BSTC),Normal Operating Cell Temperature(NOCT),and Bifacial NOCT(BNOCT).The results offer valuable insights into the interplay between optical and thermal phenomena in bifacial systems,informing the design and optimization of more efficient photovoltaic technologies.
基金financially supported by the Key Project of Natural Science Research in Colleges and Universities of Anhui Province,China(No.2022AH050816)the Open Research Grant of Joint National-Local Engineering Research Centre for Safe and Precise Coal Mining(Nos.EC2023013 and EC2022018)+1 种基金the National Natural Science Foundation of China(No.52200139)the Introduction of Talent in Anhui University of Science and Technology,China(Nos.2021yjrc18 and 2023yjrc79)。
文摘Electromagnetic interference,which necessitates the rapid advancement of substances with exceptional capabilities for bsorbing electromagnetic waves,is of urgent concern in contemporary society.In this work,CoFe_(2)O_(4)/residual carbon from coal gasification fine slag(CFO/RC)composites were created using a novel hydrothermal method.Various mechanisms for microwave absorption,including conductive loss,natural resonance,interfacial dipole polarization,and magnetic flux loss,are involved in these composites.Consequently,compared with pure residual carbon materials,this composite offers superior capabilities in microwave absorption.At 7.76GHz,the CFO/RC-2 composite achieves an impressive minimum reflection loss(RL_(min))of-43.99 dB with a thickness of 2.44 mm.Moreover,CFO/RC-3 demonstrates an effective absorption bandwidth(EAB)of up to 4.16 GHz,accompanied by a thickness of 1.18mm.This study revealed the remarkable capability of the composite to diminish electromagnetic waves,providing a new generation method for microwave absorbing materials of superior quality.
基金Science and Technology Plan Project of Xizang Autonomous Region,China under Grant No.XZ202501YD0007。
文摘A novel porous shock absorption layer is put forward in this study, and the shock absorption performance of the porous shock absorption layer is evaluated based on three-dimensional pseudo-static analysis. The modified reaction acceleration method is adopted and validated in the three-dimensional model. Seven ground motions are selected and the peak ground acceleration is adjusted to 0.2 g, 0.4 g and 0.6 g. The impact of the void ratio and thickness of the porous shock absorption layer is studied, while the surrounding rock grade and tunnel depth are also investigated. The numerical results show that the porous shock absorption layer has good shock absorption performance and can effectively reduce the maximum internal force of the secondary lining, but it cannot reduce the maximum horizontal relative displacement of the secondary lining. The circumferential rubber strip in the porous shock absorption layer will reduce shock absorption performance. The results of parameter analysis indicate that the shock absorption performance of the porous shock absorption layer increases with the increase of the void ratio and thickness, and it has good shock absorption performance under different surrounding rock grades and tunnel depths.
基金supported by the Jiangxi Provincial Natural Science Foundation(No.20232BAB202036).
文摘Interlayer engineering of two-dimensional structural materials provides unique advantages for tuning the electromagnetic properties of metal oxides,injecting unlimited energy into the design of advanced two-dimensional metal oxide electromagnetic wave absorbers.In this study,Manganese dioxide intercalated with alkali metal ions was prepared by a simple molten salt method.The pre-intercalation of ions not only enhances the polarization loss at the heterogeneous interface between cations(point sites)and man-ganese dioxide(face sites)but also alters the energy band structure of manganese oxide and enhances its electrical conductivity,which in turn enhances the conductive loss of the manganese dioxide.Due to the synergistic effect of multiple polarizations and conductive losses,NaMO exhibits superb electromag-netic wave absorption properties and an effective absorption bandwidth of 5.36 GHz at thinner matched thicknesses.In addition,the RCS simulation result further verifies the excellent electromagnetic wave ab-sorption capability of NaMO.Under the positive incidence of electromagnetic waves,the electromagnetic wave reflection intensity of the metal plate coated with NaMO is effectively reduced.Finally,this work establishes a new way to modulate the electromagnetic properties.
基金supported by the Nationals Key Research and Development Program of China (No.2017YFC0210600)the National Natural Science Foundation of China (No.51978644)。
文摘Based on the demand of sintering/pelleting flue gas ultra-low emission,a semi-dry method using a spray dryer absorber (SDA) combined with O3 oxidation was proposed for simultaneous removal of SO2 and NO.Effects of O3 injection site,O3/NO molar ratio,and spray tower temperature on the removal efficiencies were investigated.It was revealed that both desulfurization and denitrification efficiencies could reach to 85%under the conditions of setting O3 injection site inside of tower,O3/NO molar ratio 1.8,spray tower temperature 85°C,Ca/(S+2N) molar ratio 2.5 and slurry flow rate 300 m L/hr.CaSO3/Ca(OH)2 mixture slurry was used as absorbent to simulate operating conditions in iron and steel industry.The result shows that the addition of CaSO3 weakens both removal efficiencies.In addition,the reaction mechanism of simultaneous removal of SO2 and NO using SDA combined with O3 oxidation was proposed.
基金This work was supported by National Key R&D Program of China(Grant No.2019YFA0705303)National Natural Science Foundation of China(Grant No.52127807)+2 种基金National Science and Technology Major Project"Aeroengine and Gas Turbine"(Grant No.2017-VII-0008-0102)Independent Research and Development Project of State Key Laboratory of Advanced Special Steel,Shanghai Key Laboratory of Advanced Ferrometallurgy,Shanghai University(SKLASS 2020-Z05)the Science and Technology Commission of Shanghai Municipality(No.19DZ2270200).
文摘The control of macrosegregation is still a difficult problem for the production of large steel ingots.In order to develop new techniques for producing low-macrosegregation and high-quality steel ingots,the effect of the heat absorption method(HAM)used by the inorganic material rods to cool the liquid steel on the formation of macrosegregation during solidification of a 5-t GCr15SiMn bearing steel ingot was studied using experiment and mathematical simulation.The inorganic material was a mixture of CaF2 and CaO.The levels of macrosegregation in the longitudinal sections of two ingots with and without HAM were compared.Experimental results showed that the application of HAM reduced the positive segregation in the upper part of the ingot and the negative segregation in the lower part.The levels of carbon segregation along the longitudinal centerline and horizontal direction at different heights were all alleviated and the fluctuation of carbon segregation was significantly reduced.The simulation results confirmed that the melting and floating of the inorganic material could carry the sensible heat to the top of the liquid steel quickly.This leads to the acceleration of the cooling rate of the liquid steel,thereby alleviating the level of macrosegregation.
基金Project(2011467001)supported by the Ministry of Environment Protection of ChinaProject(2010DFB94130)supported by the Ministry of Science and Technology of China
文摘For physical ozone absorption without reaction,two parametric estimation methods,i.e.the common linear least square fitting and non-linear Simplex search methods,were applied,respectively,to determine the ozone mass transfer coefficient during absorption and both methods give almost the same mass transfer coefficient.While for chemical absorption with ozone decomposition reaction,the common linear least square fitting method is not applicable for the evaluation of ozone mass transfer coefficient due to the difficulty of model linearization for describing ozone concentration dissolved in water.The nonlinear Simplex method obtains the mass transfer coefficient by minimizing the sum of the differences between the simulated and experimental ozone concentration during the whole absorption process,without the limitation of linear relationship between the dissolved ozone concentration and absorption time during the initial stage of absorption.Comparison of the ozone concentration profiles between the simulation and experimental data demonstrates that Simplex method may determine ozone mass transfer coefficient during absorption in an accurate and high efficiency way with wide applicability.
基金supported by the National Natural Science Foundation of China(NSFCGrant Nos.11991051,12073068,11703077,and 11803087)+2 种基金financial support from the Yunnan Province Foundation(202001AT070069)the Light of West China Program provided by Chinese Academy of Sciences(Y7XB016001)financial support from the Light of West China Program provided by Chinese Academy of Sciences(Y8XB018001)。
文摘Observing a telluric standard star for correcting the telluric absorption lines of spectrum will take a significant amount of precious telescope time,especially in the long-term spectral monitoring project.Beyond that,it is difficult to select a suitable telluric standard star near in both time and airmass to the scientific object.In this paper,we present a method of correcting the telluric absorption lines by combining the advantages of long slit spectroscopy.By rotating the slit,we observed the scientific object and a nearby comparison star in one exposure,so that the spectra of both objects should have the same telluric transmission spectrum.The telluric transmission spectrum was constructed by dividing the observed spectrum of the comparison star by its stellar template,and was used to correct the telluric absorption lines of the scientific object.Using the long slit spectrograph of the Lijiang 2.4-meter telescope,we designed a long-term spectroscopic observation strategy,and finished a four-year spectroscopic monitoring for a pair of objects(an active galactic nucleus and a non-varying comparison star).We applied this method to correct the telluric absorption lines of the long-term monitored spectra by the Lijiang 2.4-meter telescope,and investigated the variation of the telluric absorptions at Lijiang Observatory.We found that the telluric absorption transparency is mainly modulated by the seasonal variability of the relative humidity,airmass and seeing.Using the scatter of the [O Ⅲ] λ5007 fluxes emitted from the narrow-line region of active galactic nuclei as an indicator,we found that the correction accuracy of the telluric absorption lines is 1%.
基金Project supported by the National Key Research and Development Program of China(Grant No.2021YFB3501300)the National Natural Science Foundation of China(Grant No.51731001)the Fund from the State Key Laboratory of Baiyunobo Rare Earth Resource Researches and Comprehensive Utilization’s Key Research and Development Projects。
文摘As concepts closely related to microwave absorption properties,impedance matching and phase matching were rarely combined with material parameters to regulate properties and explore related mechanisms.In this work,reduction–diffusion method was innovatively applied to synthesize rare earth alloy Y_(2)Fe_(17).In order to regulate the electromagnetic parameters of absorbers,the Y_(2)Fe_(17)N_(3-δ)particles were coated with silica(Y_(2)Fe_(17)N_(3-δ)@SiO_(2))and absorbers with different volume fractions were prepared.The relationship between impedance matching,matching thickness,and the strongest reflection loss peak(RLmin)was presented obviously.Compared to the microwave absorption properties of Y_(2)Fe_(17)N_(3-δ)/PU absorber,Y_(2)Fe_(17)N_(3-δ)@SiO_(2)/PU absorbers are more conducive to the realization of microwave absorption material standards which are thin thickness,light weight,strong absorbing intensity,and broad bandwidth.Based on microwave frequency bands,the microwave absorption properties of the absorbers were analyzed and the related parameters were listed.As an important parameter related to perfect matching,reflection factor(√ε_(r)/μ_(r))was discussed combined with microwave amplitude attenuation.According to the origin and mathematical model of bandwidth,the formula of EAB(RL<-10 dB)was derived and simplified.The calculated bandwidths agreed well with experimental results.
文摘In this paper, the authors investigated the feasibility of near-infrared to measure sugar at cotton fibre. The simple regression equations are generated by respectively correlating thc absorption data(by using 1640nm and 2100nm wavelengths) with sugar( glucose, fructose and sucrose) and the regression modes possess a high coefficient of correlation. The differences for absorption of various sugars at some (?)velengths are diseussed.
文摘This paper discusses the principle and mathematical method to measure the phase fractions of multiphase flows by using a dual-energy gamma-ray system. The dual-energy gamma-ray device is composed of radioactive isotopes of 241Am and 137Cs with emission energies of 59.5 keV and 662 keV respectively. A rational method to calibrate the absorption coefficient was introduced in detail. The statistical error has been analyzed on the basis of the accurate absorption coefficient which enables determination phrase fractions almost independent of the flow regime. Improvement has been achieved on the measurement accuracy of phase fractions.
文摘The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy absorption and its distribution in homogeneousand layered homogenous lossy dielectric spheres are presented,and a comparison of these resultswith analytical solution is given.The calculation is carried out for dielectric cylinder on conduct-ing ground as well,and the results are compared with the image theory.All the computationsshew that the finite-difference time-domain method can give satisfactory results.
基金Supported by the National Natural Science Foundation of China under Grant No.19474043.
文摘The S K-shell near-edge x-ray absorption fine structure spectra of solid CS_(2) have been calculated by means of the multiple-scattering cluster method.The results show the existence of two kinds of absorption spectra which correspond to single-bond(C-S)and double-bond(C=S),respectively,and their superposition of the two spectra fits the experimental spectrum well.Our calculation supports the zigzag chain model of solid CS_(2) with C-C distance of 3.60±0.01Å.
基金This work was funded by Project of Construction of Innovative Teams and Teacher Career Development for Universities and Colleges under Beijing Municipality(IDHT20180508)Scientific Research Common Program of Beijing Municipal Commission of Education(KM202010017006)+2 种基金the Talents Project of Beijing Organization Department(2018000020124G091)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA21021101)the National Key Research and Development Program of China(2019YFA0705803).
文摘A series of high oil-absorption resins with low cross-linking degree were synthesized by suspension polymerization using stearyl methacrylate(SMA),2-Ethylhexyl methacrylate(EHMA),and styrene(St)as monomers.Response surface methodology(RSM)with central composite design(CCD)was also applied to determine the optimal parameters that are mainly known to affect their synthesis.Thus,the effects of the monomer mass ratio(EHMA:SMA),the rigid monomer(St)dosage,the porous agent(acetone)dosage,and their pairwise interaction on the resin's oil-absorption capacity were analyzed,highlighting PSES-R_(2) as the resin with the optimum performance.The pure oil-absorption rates of PSES-R_(2) for gasoline,diesel,and kerosene were 11.19 g·g^(-1),16.25 g·g^(-1),and 14.84 g·g^(-1),respectively,while the oil removal rates from oily wastewater were 98.82%,65.11%,and 99.63%,respectively.
文摘The enhanced optical absorption measured by Constant Photocurrent Method (CPM) of hydrogenated nanocrystalline silicon thin films is due mainly to bulk and/or surface light scattering effects. A new numerical method is presented to calculate both true optical absorption and scattering coefficient from CPM absorption spectra of nanotextured nano-crystalline silicon films. Bulk and surface light scattering contributions can be unified through the correlation obtained between the scattering coefficient and surface roughness obtained using our method.
文摘In vitro experiment using excised skin has been valuable for studying the mechanism of percutaneous absorption. Based on previously established static diffusion cell system in this laboratory, a novel model-peifused glass diffusion cell system is desboed. The results of initial comporative study on percutaneous absorption between glass perfused diffusion cell and static diffusion cell, ih vitro and in vivo permeation as well as factors affecting permeation with seven radiolabelled chemicals are presented. The results demonstrate that the peifused diffusion cell system, which used a perfusion nuid betow the suiface of skin to take up the materials which penetrated the skin, is more similar to physiologic condition,convenient and automatic than that of the static cell. It well predicts the in vivo percutaneous absorption if appropriate areptor fluid is chosen. The results also show that the selection of receptor fluid is critical for in vitro permeation of chemicals with different soubility
基金supported by the National Nature Science Foundation of China(NSFC)(Grant Nos.22275004,62274040,and 62304046)the Shanghai Science and Technology Committee(Grant No.22JC1410300)+2 种基金the Shanghai Key Laboratory of Novel Extreme Condition Materials(Grant No.22dz2260800)the National Key Research and Development Program of China(Grant No.2022YFE0137400)the Shanghai Science and Technology Innovationaction Plan(Grant No.24DZ3001200).
文摘High-pressure research has emerged as a pivotal approach for advancing our understanding and development of optoelectronic materials,which are vital for a wide range of applications,including photovoltaics,light-emitting devices,and photodetectors.This review highlights various in situ characterization methods employed in high-pressure research to investigate the optical,electronic,and structural properties of optoelectronic materials.We explore the advances that have been made in techniques such as X-ray diffraction,absorption spectroscopy,nonlinear optics,photoluminescence spectroscopy,Raman spectroscopy,and photoresponse measurement,emphasizing how these methods have enhanced the elucidation of structural transitions,bandgap modulation,performance optimization,and carrier dynamics engineering.These insights underscore the pivotal role of high-pressure techniques in optimizing and tailoring optoelectronic materials for future applications.
文摘The sound absorption coefficients of wood and wood boards for five eucalypt species (Eucalyptus urophylla, Euca-lyptus urophylla E. grandis, Eucalyptus urophylla E. tereticornis, Eucalyptus urophylla E. camaldulensis and Eucalyptus cloeziana) that were collected from plantation in Dongmen Forestry Center of Guangxi Province, China were tested with stand-ing wave method and their sound absorption properties were also compared. The results showed that the sound absorption co-efficients of the five eucalypt wood species did not change evidently below 1000 Hz, but above 1000 Hz their sound absorption coefficients increased with the increasing frequency. The difference in sound absorption coefficient among five species of eucalypt wood is not evident at the tested frequency range (200-2000 Hz), but the sound absorption property of Eucalyptus urophylla at low frequency is better than that of other four species. The sound absorption coefficient of the tangential-sawn board is higher than that of the radial-sawn board. The sound absorption property of eucalypt wood of 0.5 cm in thickness is much better than that of 1.0 cm in thickness. It is concluded that wood sound absorption properties of eucalypts are affected by their board thickness and the type of sawn timber within the testing frequency, but the variance of wood sound absorption property among the five tested species is not significant.
