Based on the explicit finite element(FE) method and platform of ABAQUS,considering both the inhomogeneity of soils and concave-convex fluctuation of topography,a large-scale refined two-dimensional(2D) FE nonlinear an...Based on the explicit finite element(FE) method and platform of ABAQUS,considering both the inhomogeneity of soils and concave-convex fluctuation of topography,a large-scale refined two-dimensional(2D) FE nonlinear analytical model for Fuzhou Basin was established.The peak ground motion acceleration(PGA) and focusing effect with depth were analyzed.Meanwhile,the results by wave propagation of one-dimensional(1D) layered medium equivalent linearization method were added for contrast.The results show that:1) PGA at different depths are obviously amplified compared to the input ground motion,amplification effect of both funnel-shaped depression and upheaval areas(based on the shape of bedrock surface) present especially remarkable.The 2D results indicate that the PGA displays a non-monotonic decreasing with depth and a greater focusing effect of some particular layers,while the 1D results turn out that the PGA decreases with depth,except that PGA at few particular depth increases abruptly; 2) To the funnel-shaped depression areas,PGA amplification effect above 8 m depth shows relatively larger,to the upheaval areas,PGA amplification effect from 15 m to 25 m depth seems more significant.However,the regularities of the PGA amplification effect could hardly be found in the rest areas; 3) It appears a higher regression rate of PGA amplification coefficient with depth when under a smaller input motion; 4) The frequency spectral characteristic of input motion has noticeable effects on PGA amplification tendency.展开更多
This paper is concerned with the problem of stability analysis of nonlinear Roesser-type two-dimensional （2D） systems. Firstly, the fuzzy modeling method for the usual one-dimensional （1D） systems is extended to t...This paper is concerned with the problem of stability analysis of nonlinear Roesser-type two-dimensional （2D） systems. Firstly, the fuzzy modeling method for the usual one-dimensional （1D） systems is extended to the 2D ease so that the underlying nonlinear 2D system can be represented by the 2D Takagi Sugeno （TS） fuzzy model, which is convenient for implementing the stability analysis. Secondly, a new kind of fuzzy Lyapunov function, which is a homogeneous polynomially parameter dependent on fuzzy membership functions, is developed to conceive less conser- vative stability conditions for the TS Roesser-type 2D system. In the process of stability analysis, the obtained stability conditions approach exactness in the sense of convergence by applying some novel relaxed techniques. Moreover, the obtained result is formulated in the form of linear matrix inequalities, which can be easily solved via standard numerical software. Finally, a numerical example is also given to demonstrate the effectiveness of the proposed approach.展开更多
The present study focused on analyzing the technical efficiency office farms in southwest of Niger. The data from January to March 2015 survey of 148 ms in three districts of south-western of Niger were analyzed by us...The present study focused on analyzing the technical efficiency office farms in southwest of Niger. The data from January to March 2015 survey of 148 ms in three districts of south-western of Niger were analyzed by using DEA-Tobit two-step method. In the f＇ust step, data envelopment analysis （DEA） was applied to estimate technical, pure technical and scale efficiency. In the second step, Tobit regression was used to identify factors affecting technical efficiency. The results showed that rice producers in southwest of Niger could reduce their inputs by 52% and still produce the same level of rice output. The Tobit regression showed that factors, such as farm size, experience in rice farming, membership of cooperative, main occupation and land ownership had a direct impact on technical efficiency.展开更多
This paper expresses the efficient outputs of decisionmaking unit（DMU） as the sum of ＂average outputs＂ forecasted by a GM（1,N） model and ＂increased outputs＂ which reflect the difficulty to realize efficient ou...This paper expresses the efficient outputs of decisionmaking unit（DMU） as the sum of ＂average outputs＂ forecasted by a GM（1,N） model and ＂increased outputs＂ which reflect the difficulty to realize efficient outputs.The increased outputs are solved by linear programming using data envelopment analysis efficiency theories,wherein a new sample is introduced whose inputs are equal to the budget in the issue No.n ＋ 1 and outputs are forecasted by the GM（1,N） model.The shortcoming in the existing methods that the forecasted efficient outputs may be less than the possible actual outputs according to developing trends of input-output rate in the periods of pre-n is overcome.The new prediction method provides decision-makers with more decisionmaking information,and the initial conditions are easy to be given.展开更多
Environmental efficiency standards are often used to evaluate the costs of oceanic economic development. A variety of statistical analyses were applied in this study to quantify the marine environmental efficiency of ...Environmental efficiency standards are often used to evaluate the costs of oceanic economic development. A variety of statistical analyses were applied in this study to quantify the marine environmental efficiency of 11 Chinese coastal provinces and municipalities between 2000 and 2014. Results initially reveal that environmental efficiency measures that incorporate undesirable outputs are more consistent with real production conditions and thus the use of marine economic and environmental efficiencies supplement and complement one another. Second, overall marine environmental efficiency across China tends to be low and can be spatially characterized by a transformation such that the inefficiencies noted in 2000 have subsequently been transformed to comprise a three-tiered structure that encompasses northern, central, and southern cores. Third, variation in absolute and relative marine environmental efficiency differences for the coastal regions of China have been consistent over time; values initially decreased before increasing again in a fluctuating manner over the time period of this analysis. Fourth, data show that the Pearl River Delta area has experienced the highest rate of change in marine environmental efficiency over time when economic zones are used as basic research units, although values have nevertheless fluctuated significantly. Fifth, values for total factor productivity as well as technical efficiency and change across the Chinese marine economy all fluctuated over time but increased. Data show that changes in marine environmental efficiency across China can primarily be attributed to progress in marine science and technology. Finally, levels of capital investment and marine industrial pollution intensity are not significantly correlated with marine environmental efficiency. Indeed, both marine industrial structural levels and environmental protection technologies have had a positive effect on environmental efficiency while levels of investment in marine scientific research as well as the scale of economic development, the marine economy, and the degree of external openness have all exerted negative effects on this key variable.展开更多
This work illustrates the application of the “Second Order Comprehensive Adjoint Sensitivity Analysis Methodology” (2<sup>nd</sup>-CASAM) to a mathematical model that can simulate the evolution and/or tr...This work illustrates the application of the “Second Order Comprehensive Adjoint Sensitivity Analysis Methodology” (2<sup>nd</sup>-CASAM) to a mathematical model that can simulate the evolution and/or transmission of particles in a heterogeneous medium. The model response is the value of the model’s state function (particle concentration or particle flux) at a point in phase-space, which would simulate a pointwise measurement of the respective state function. This paradigm model admits exact closed-form expressions for all of the 1<sup>st</sup>- and 2<sup>nd</sup>-order response sensitivities to the model’s uncertain parameters and domain boundaries. These closed-form expressions can be used to verify the numerical results of production and/or commercial software, e.g., particle transport codes. Furthermore, this paradigm model comprises many uncertain parameters which have relative sensitivities of identical magnitudes. Therefore, this paradigm model could serve as a stringent benchmark for inter-comparing the performances of all deterministic and statistical sensitivity analysis methods, including the 2<sup>nd</sup>-CASAM.展开更多
This work continues the illustrative application of the “Second Order Comprehensive Adjoint Sensitivity Analysis Methodology” (2<sup>nd</sup>-CASAM) to a benchmark mathematical model that can simulate th...This work continues the illustrative application of the “Second Order Comprehensive Adjoint Sensitivity Analysis Methodology” (2<sup>nd</sup>-CASAM) to a benchmark mathematical model that can simulate the evolution and/or transmission of particles in a heterogeneous medium. The model response considered in this work is a reaction-rate detector response, which provides the average interactions of particles with the respective detector or, alternatively, the time-average of the concentration of a mixture of substances in a medium. The definition of this model response includes both uncertain boundary points of the benchmark, thereby providing both direct and indirect contributions to the response sensitivities stemming from the boundaries. The exact expressions for the 1<sup>st</sup>- and 2<sup>nd</sup>-order response sensitivities to the boundary and model parameters obtained in this work can serve as stringent benchmarks for inter-comparing the performances of all (deterministic and statistical) sensitivity analysis methods.展开更多
This work involves the evaluation of dry port competitiveness through analysis of efficiencies for selected dry ports in Africa. Five dry ports were selected and analysis carried out over a period of four years. The d...This work involves the evaluation of dry port competitiveness through analysis of efficiencies for selected dry ports in Africa. Five dry ports were selected and analysis carried out over a period of four years. The dry ports considered were Mojo and Kality in Ethiopia, Mombasa in Kenya, Isaka in Tanzania and Casablanca in Casablanca, Morocco. Data Envelopment Analysis (DEA) was applied for this work. Container throughputs for the various ports under consideration were used as the output variable for the data analysis model, while the number of reach stackers, the number of tractors, the number of forklifts and the size of the dry port were used as the input variables. From the results, the Mombasa dry port was found to be the most efficient with an average score of approximately 1 over the period under consideration. Casablanca was the second efficient dry port with an average score of 0.762, while Isaka was the least efficient with an average score of 0.142. This research is significant since the African countries have embraced the dry port concept, as witnessed in the huge investments in this sector, and would serve to highlight areas that need improvement for the few existing dry port facilities, most of which are undergoing expansion as well as modernization.展开更多
The efficiency of 8 seaports in the Kingdom of Morocco region was evaluated. Two associated studies were conducted based on data collected for 4 years (2014-2017), Standard Data Envelopment Analysis (DEA) method was u...The efficiency of 8 seaports in the Kingdom of Morocco region was evaluated. Two associated studies were conducted based on data collected for 4 years (2014-2017), Standard Data Envelopment Analysis (DEA) method was used in the first analysis through CCR and BCC models, and thus a scale of efficiency analysis was used in a second analysis. By using both methods, enhanced insight into the efficiency situation is collected, proving subsequently that a majority of the container ports and terminals in the Kingdom of Morocco are found to be technically inefficient. The research concludes through returns to scale method how port resources should be utilized in the aim to impulse inefficient ports perform better.展开更多
This paper proposes the efficient model building in active appearance model(AAM) for the rotated face.Finding an exact region of the face is generally difficult due to different shapes and viewpoints.Unlike many paper...This paper proposes the efficient model building in active appearance model(AAM) for the rotated face.Finding an exact region of the face is generally difficult due to different shapes and viewpoints.Unlike many papers about the fitting method of AAM,this paper treats how images are chosen for fitting of the rotated face in modelling process.To solve this problem,databases of facial rotation and expression are selected and models are built using Procrustes method and principal component analysis(PCA).These models are applied in fitting methods like basic AAM fitting,inverse compositional alignment(ICA),project-out ICA,normalization ICA,robust normalization inverse compositional algorithm(RNIC)and efficient robust normalization algorithm(ERN).RNIC and ERN can fit the rotated face in images efficiently.The efficiency of model building is checked using sequence images made by ourselves.展开更多
In this work,the Slacks-Based Measure(SBM)model within Data Envelopment Analysis was employed to establish a set of indicators for evaluating the energy efficiency of manufacturing workshops.The energy efficiency of 1...In this work,the Slacks-Based Measure(SBM)model within Data Envelopment Analysis was employed to establish a set of indicators for evaluating the energy efficiency of manufacturing workshops.The energy efficiency of 12 Company CW’s manufacturing workshops from 2016 to 2022 was assessed.The findings indicated that aside from a few workshops operating at the production frontier,the rest exhibit significant fluctuations in energy efficiency and generally low energy efficiency.Subsequently,a combined GRA-Tobit analysis model was introduced to identify factors influencing the energy efficiency of Company CW’s manufacturing workshops.Regression analysis revealed that technological investments,employee quality,workshop production scale,investment in clean energy,and the level of pollution control all significantly impact the energy efficiency of Company CW’s manufacturing workshops.By evaluating the energy efficiency of Company CW’s manufacturing workshops and studying their influencing factors,this research aids company managers in understanding the energy efficiency of the manufacturing process.It optimizes the combination of various production elements,thereby offering effective guidance for improving the energy efficiency issues of the company’s manufacturing workshops,which can contribute to enhancing the corporation’s overall energy efficiency.展开更多
Ecosystem services are substantial elements for human society. The central challenge to meet the human needs from ecosystems while sustain the Earth's life support systems makes it urgent to enhance efficient natu...Ecosystem services are substantial elements for human society. The central challenge to meet the human needs from ecosystems while sustain the Earth's life support systems makes it urgent to enhance efficient natural resource management for sustainable ecological and socioeconomic development. Trade-off analysis of ecosystem services can help to identify optimal decision points to balance the costs and benefits of the diverse human uses of ecosystems. In this sense, the aim of this paper is to provide key insights into ecosystem services trade-off analysis at different scales from a land use perspective, by comprehensively reviewing the trade-offs analysis tools and approaches that addressed in ecology, economics and other fields. The review will significantly contribute to future research on trade-off analysis to avoid inferior management options and offer a win-win solution based on comprehensive and efficient planning for interacting multiple ecosystem services.展开更多
Many methods based on deep learning have achieved amazing results in image sentiment analysis.However,these existing methods usually pursue high accuracy,ignoring the effect on model training efficiency.Considering th...Many methods based on deep learning have achieved amazing results in image sentiment analysis.However,these existing methods usually pursue high accuracy,ignoring the effect on model training efficiency.Considering that when faced with large-scale sentiment analysis tasks,the high accuracy rate often requires long experimental time.In view of the weakness,a method that can greatly improve experimental efficiency with only small fluctuations in model accuracy is proposed,and singular value decomposition(SVD)is used to find the sparse feature of the image,which are sparse vectors with strong discriminativeness and effectively reduce redundant information;The authors propose the Fast Dictionary Learning algorithm(FDL),which can combine neural network with sparse representation.This method is based on K-Singular Value Decomposition,and through iteration,it can effectively reduce the calculation time and greatly improve the training efficiency in the case of small fluctuation of accuracy.Moreover,the effectiveness of the proposed method is evaluated on the FER2013 dataset.By adding singular value decomposition,the accuracy of the test suite increased by 0.53%,and the total experiment time was shortened by 8.2%;Fast Dictionary Learning shortened the total experiment time by 36.3%.展开更多
At present,power electronic transformers(PETs)have been widely used in power systems.With the increase of PET capacity to the megawatt level.the problem of increased losses need to be taken seriously.As an important i...At present,power electronic transformers(PETs)have been widely used in power systems.With the increase of PET capacity to the megawatt level.the problem of increased losses need to be taken seriously.As an important indicator of power electronic device designing,losses have always been the focus of attention.At present,the losses are generally measured through experiments,but it takes a lot of time and is difficult to quantitatively analyze the internal distribution of PET losses.To solve the above problems,this article first qualitatively analyzes the losses of power electronic devices and proposes a loss calculation method based on pure simulation.This method uses the Discrete State Event Driven(DSED)modeling method to solve the problem of slow simulation speed of large-capacity power electronic devices and uses a loss calculation method that considers the operating conditions of the device to improve the calculation accuracy.For the PET prototype in this article,a losses model of the PET is established.The comparison of experimental and simulation results verifies the feasibility of the losses model.Then the losses composition of PET was analyzed to provide reference opinions for actual operation.It can help pre-analyze the losses distribution of PET,thereby providing a potential method for improving system efficiency.展开更多
Data envelopment analysis(DEA) model is widely used to evaluate the relative efficiency of producers. It is a kind of objective decision method with multiple indexes. However, the two basic models frequently used at p...Data envelopment analysis(DEA) model is widely used to evaluate the relative efficiency of producers. It is a kind of objective decision method with multiple indexes. However, the two basic models frequently used at present, the C2R model and the C2GS2 model have limitations when used alone,resulting in evaluations that are often unsatisfactory. In order to solve this problem, a mixed DEA model is built and is used to evaluate the validity of the business efficiency of listed companies. An explanation of how to use this mixed DEA model is offered and its feasibility is verified.展开更多
Massive MIMO is one of tile enabling technologies tbr beyond 4G and 5G systems due to its ability to provide beamforming gain and reduce interference Dual-polarized antenna is widely adopted to accommodate a large num...Massive MIMO is one of tile enabling technologies tbr beyond 4G and 5G systems due to its ability to provide beamforming gain and reduce interference Dual-polarized antenna is widely adopted to accommodate a large number of antenna elements in limited space. However, current CSI（channel state information） feedback schemes developed in LTE for conventional MIMO systems are not efficient enough for massive MIMO systems since the overhead increases almost linearly with the number of antenna. Moreover, the codebook for massive MIMO will be huge and difficult to design with the LTE methodology. This paper proposes a novel CSI feedback scheme named layered Multi-paths Information based CSI Feedback （LMPIF）, which can achieve higher spectrum efficiency for dual-polarized antenna system with low feedback overhead. The MIMO channel is decomposed into long term components （multipath directions and amplitudes） and short term components （multipath phases）. The relationship between the two components and the optimal precoder is derived in closed form. To reduce the overhead, different granularities in feedback time have been applied for the long term components and short term components Link and system level simulation results prove that LMPIF can improve performance considerably with low CSI feedback overhead.展开更多
基金Project(2011CB013601) supported by the National Basic Research Program of ChinaProject(51378258) supported by the National Natural Science Foundation of China
文摘Based on the explicit finite element(FE) method and platform of ABAQUS,considering both the inhomogeneity of soils and concave-convex fluctuation of topography,a large-scale refined two-dimensional(2D) FE nonlinear analytical model for Fuzhou Basin was established.The peak ground motion acceleration(PGA) and focusing effect with depth were analyzed.Meanwhile,the results by wave propagation of one-dimensional(1D) layered medium equivalent linearization method were added for contrast.The results show that:1) PGA at different depths are obviously amplified compared to the input ground motion,amplification effect of both funnel-shaped depression and upheaval areas(based on the shape of bedrock surface) present especially remarkable.The 2D results indicate that the PGA displays a non-monotonic decreasing with depth and a greater focusing effect of some particular layers,while the 1D results turn out that the PGA decreases with depth,except that PGA at few particular depth increases abruptly; 2) To the funnel-shaped depression areas,PGA amplification effect above 8 m depth shows relatively larger,to the upheaval areas,PGA amplification effect from 15 m to 25 m depth seems more significant.However,the regularities of the PGA amplification effect could hardly be found in the rest areas; 3) It appears a higher regression rate of PGA amplification coefficient with depth when under a smaller input motion; 4) The frequency spectral characteristic of input motion has noticeable effects on PGA amplification tendency.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.60972164,60904101,and 61273029)the Key Project of Chinese Ministry of Education(Grant No.212033)+3 种基金the Key Technologies R & D Program of Liaoning Province (Grant No.2011224006)the Program for Liaoning Innovative Research Team in University(Grant No.LT2011019)the Program for Liaoning Excellent Talents in University(Grant No.LJQ2011137)the Science and Technology Program of Shenyang (Grant No.F11-264-1-70)
文摘This paper is concerned with the problem of stability analysis of nonlinear Roesser-type two-dimensional （2D） systems. Firstly, the fuzzy modeling method for the usual one-dimensional （1D） systems is extended to the 2D ease so that the underlying nonlinear 2D system can be represented by the 2D Takagi Sugeno （TS） fuzzy model, which is convenient for implementing the stability analysis. Secondly, a new kind of fuzzy Lyapunov function, which is a homogeneous polynomially parameter dependent on fuzzy membership functions, is developed to conceive less conser- vative stability conditions for the TS Roesser-type 2D system. In the process of stability analysis, the obtained stability conditions approach exactness in the sense of convergence by applying some novel relaxed techniques. Moreover, the obtained result is formulated in the form of linear matrix inequalities, which can be easily solved via standard numerical software. Finally, a numerical example is also given to demonstrate the effectiveness of the proposed approach.
文摘The present study focused on analyzing the technical efficiency office farms in southwest of Niger. The data from January to March 2015 survey of 148 ms in three districts of south-western of Niger were analyzed by using DEA-Tobit two-step method. In the f＇ust step, data envelopment analysis （DEA） was applied to estimate technical, pure technical and scale efficiency. In the second step, Tobit regression was used to identify factors affecting technical efficiency. The results showed that rice producers in southwest of Niger could reduce their inputs by 52% and still produce the same level of rice output. The Tobit regression showed that factors, such as farm size, experience in rice farming, membership of cooperative, main occupation and land ownership had a direct impact on technical efficiency.
基金supported by the Research Start Funds for Introducing High-level Talents of North China University of Water Resources and Electric Power
文摘This paper expresses the efficient outputs of decisionmaking unit（DMU） as the sum of ＂average outputs＂ forecasted by a GM（1,N） model and ＂increased outputs＂ which reflect the difficulty to realize efficient outputs.The increased outputs are solved by linear programming using data envelopment analysis efficiency theories,wherein a new sample is introduced whose inputs are equal to the budget in the issue No.n ＋ 1 and outputs are forecasted by the GM（1,N） model.The shortcoming in the existing methods that the forecasted efficient outputs may be less than the possible actual outputs according to developing trends of input-output rate in the periods of pre-n is overcome.The new prediction method provides decision-makers with more decisionmaking information,and the initial conditions are easy to be given.
基金Under the auspices of National Natural Science Foundation of China(No.41571127)Ministry of Education Humanities and Social Sciences Key Research Base Major Project(No.17JJD790010)
文摘Environmental efficiency standards are often used to evaluate the costs of oceanic economic development. A variety of statistical analyses were applied in this study to quantify the marine environmental efficiency of 11 Chinese coastal provinces and municipalities between 2000 and 2014. Results initially reveal that environmental efficiency measures that incorporate undesirable outputs are more consistent with real production conditions and thus the use of marine economic and environmental efficiencies supplement and complement one another. Second, overall marine environmental efficiency across China tends to be low and can be spatially characterized by a transformation such that the inefficiencies noted in 2000 have subsequently been transformed to comprise a three-tiered structure that encompasses northern, central, and southern cores. Third, variation in absolute and relative marine environmental efficiency differences for the coastal regions of China have been consistent over time; values initially decreased before increasing again in a fluctuating manner over the time period of this analysis. Fourth, data show that the Pearl River Delta area has experienced the highest rate of change in marine environmental efficiency over time when economic zones are used as basic research units, although values have nevertheless fluctuated significantly. Fifth, values for total factor productivity as well as technical efficiency and change across the Chinese marine economy all fluctuated over time but increased. Data show that changes in marine environmental efficiency across China can primarily be attributed to progress in marine science and technology. Finally, levels of capital investment and marine industrial pollution intensity are not significantly correlated with marine environmental efficiency. Indeed, both marine industrial structural levels and environmental protection technologies have had a positive effect on environmental efficiency while levels of investment in marine scientific research as well as the scale of economic development, the marine economy, and the degree of external openness have all exerted negative effects on this key variable.
文摘This work illustrates the application of the “Second Order Comprehensive Adjoint Sensitivity Analysis Methodology” (2<sup>nd</sup>-CASAM) to a mathematical model that can simulate the evolution and/or transmission of particles in a heterogeneous medium. The model response is the value of the model’s state function (particle concentration or particle flux) at a point in phase-space, which would simulate a pointwise measurement of the respective state function. This paradigm model admits exact closed-form expressions for all of the 1<sup>st</sup>- and 2<sup>nd</sup>-order response sensitivities to the model’s uncertain parameters and domain boundaries. These closed-form expressions can be used to verify the numerical results of production and/or commercial software, e.g., particle transport codes. Furthermore, this paradigm model comprises many uncertain parameters which have relative sensitivities of identical magnitudes. Therefore, this paradigm model could serve as a stringent benchmark for inter-comparing the performances of all deterministic and statistical sensitivity analysis methods, including the 2<sup>nd</sup>-CASAM.
文摘This work continues the illustrative application of the “Second Order Comprehensive Adjoint Sensitivity Analysis Methodology” (2<sup>nd</sup>-CASAM) to a benchmark mathematical model that can simulate the evolution and/or transmission of particles in a heterogeneous medium. The model response considered in this work is a reaction-rate detector response, which provides the average interactions of particles with the respective detector or, alternatively, the time-average of the concentration of a mixture of substances in a medium. The definition of this model response includes both uncertain boundary points of the benchmark, thereby providing both direct and indirect contributions to the response sensitivities stemming from the boundaries. The exact expressions for the 1<sup>st</sup>- and 2<sup>nd</sup>-order response sensitivities to the boundary and model parameters obtained in this work can serve as stringent benchmarks for inter-comparing the performances of all (deterministic and statistical) sensitivity analysis methods.
文摘This work involves the evaluation of dry port competitiveness through analysis of efficiencies for selected dry ports in Africa. Five dry ports were selected and analysis carried out over a period of four years. The dry ports considered were Mojo and Kality in Ethiopia, Mombasa in Kenya, Isaka in Tanzania and Casablanca in Casablanca, Morocco. Data Envelopment Analysis (DEA) was applied for this work. Container throughputs for the various ports under consideration were used as the output variable for the data analysis model, while the number of reach stackers, the number of tractors, the number of forklifts and the size of the dry port were used as the input variables. From the results, the Mombasa dry port was found to be the most efficient with an average score of approximately 1 over the period under consideration. Casablanca was the second efficient dry port with an average score of 0.762, while Isaka was the least efficient with an average score of 0.142. This research is significant since the African countries have embraced the dry port concept, as witnessed in the huge investments in this sector, and would serve to highlight areas that need improvement for the few existing dry port facilities, most of which are undergoing expansion as well as modernization.
文摘The efficiency of 8 seaports in the Kingdom of Morocco region was evaluated. Two associated studies were conducted based on data collected for 4 years (2014-2017), Standard Data Envelopment Analysis (DEA) method was used in the first analysis through CCR and BCC models, and thus a scale of efficiency analysis was used in a second analysis. By using both methods, enhanced insight into the efficiency situation is collected, proving subsequently that a majority of the container ports and terminals in the Kingdom of Morocco are found to be technically inefficient. The research concludes through returns to scale method how port resources should be utilized in the aim to impulse inefficient ports perform better.
基金Next-Generation Information Computing Development Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education,Science and Technology(No.2012M3C4A7032182)The MSIP(Ministry of Science,ICT&Future Planning),Korea,under the ITRC(Information Technology Research Center)support program(NIPA-2013-H0301-13-2006)supervised by the NIPA(National IT Industry Promotion Agency)
文摘This paper proposes the efficient model building in active appearance model(AAM) for the rotated face.Finding an exact region of the face is generally difficult due to different shapes and viewpoints.Unlike many papers about the fitting method of AAM,this paper treats how images are chosen for fitting of the rotated face in modelling process.To solve this problem,databases of facial rotation and expression are selected and models are built using Procrustes method and principal component analysis(PCA).These models are applied in fitting methods like basic AAM fitting,inverse compositional alignment(ICA),project-out ICA,normalization ICA,robust normalization inverse compositional algorithm(RNIC)and efficient robust normalization algorithm(ERN).RNIC and ERN can fit the rotated face in images efficiently.The efficiency of model building is checked using sequence images made by ourselves.
文摘In this work,the Slacks-Based Measure(SBM)model within Data Envelopment Analysis was employed to establish a set of indicators for evaluating the energy efficiency of manufacturing workshops.The energy efficiency of 12 Company CW’s manufacturing workshops from 2016 to 2022 was assessed.The findings indicated that aside from a few workshops operating at the production frontier,the rest exhibit significant fluctuations in energy efficiency and generally low energy efficiency.Subsequently,a combined GRA-Tobit analysis model was introduced to identify factors influencing the energy efficiency of Company CW’s manufacturing workshops.Regression analysis revealed that technological investments,employee quality,workshop production scale,investment in clean energy,and the level of pollution control all significantly impact the energy efficiency of Company CW’s manufacturing workshops.By evaluating the energy efficiency of Company CW’s manufacturing workshops and studying their influencing factors,this research aids company managers in understanding the energy efficiency of the manufacturing process.It optimizes the combination of various production elements,thereby offering effective guidance for improving the energy efficiency issues of the company’s manufacturing workshops,which can contribute to enhancing the corporation’s overall energy efficiency.
基金China National Natural Science Funds for Distinguished Young Scholar,No.71225005The Key Project in the National Science&Technology Pillar Program of China,No.2013BACO3B00
文摘Ecosystem services are substantial elements for human society. The central challenge to meet the human needs from ecosystems while sustain the Earth's life support systems makes it urgent to enhance efficient natural resource management for sustainable ecological and socioeconomic development. Trade-off analysis of ecosystem services can help to identify optimal decision points to balance the costs and benefits of the diverse human uses of ecosystems. In this sense, the aim of this paper is to provide key insights into ecosystem services trade-off analysis at different scales from a land use perspective, by comprehensively reviewing the trade-offs analysis tools and approaches that addressed in ecology, economics and other fields. The review will significantly contribute to future research on trade-off analysis to avoid inferior management options and offer a win-win solution based on comprehensive and efficient planning for interacting multiple ecosystem services.
基金supported by the National Natural Science Foundation of China(No.61801440)the High‐quality and Cutting‐edge Disciplines Construction Project for Universities in Beijing(Internet Information,Communication University of China),State Key Laboratory of Media Convergence and Communication(Communication University of China)the Fundamental Research Funds for the Central Universities(CUC2019B069).
文摘Many methods based on deep learning have achieved amazing results in image sentiment analysis.However,these existing methods usually pursue high accuracy,ignoring the effect on model training efficiency.Considering that when faced with large-scale sentiment analysis tasks,the high accuracy rate often requires long experimental time.In view of the weakness,a method that can greatly improve experimental efficiency with only small fluctuations in model accuracy is proposed,and singular value decomposition(SVD)is used to find the sparse feature of the image,which are sparse vectors with strong discriminativeness and effectively reduce redundant information;The authors propose the Fast Dictionary Learning algorithm(FDL),which can combine neural network with sparse representation.This method is based on K-Singular Value Decomposition,and through iteration,it can effectively reduce the calculation time and greatly improve the training efficiency in the case of small fluctuation of accuracy.Moreover,the effectiveness of the proposed method is evaluated on the FER2013 dataset.By adding singular value decomposition,the accuracy of the test suite increased by 0.53%,and the total experiment time was shortened by 8.2%;Fast Dictionary Learning shortened the total experiment time by 36.3%.
基金the National Key Research and Development Program of China(2017YFB0903200).
文摘At present,power electronic transformers(PETs)have been widely used in power systems.With the increase of PET capacity to the megawatt level.the problem of increased losses need to be taken seriously.As an important indicator of power electronic device designing,losses have always been the focus of attention.At present,the losses are generally measured through experiments,but it takes a lot of time and is difficult to quantitatively analyze the internal distribution of PET losses.To solve the above problems,this article first qualitatively analyzes the losses of power electronic devices and proposes a loss calculation method based on pure simulation.This method uses the Discrete State Event Driven(DSED)modeling method to solve the problem of slow simulation speed of large-capacity power electronic devices and uses a loss calculation method that considers the operating conditions of the device to improve the calculation accuracy.For the PET prototype in this article,a losses model of the PET is established.The comparison of experimental and simulation results verifies the feasibility of the losses model.Then the losses composition of PET was analyzed to provide reference opinions for actual operation.It can help pre-analyze the losses distribution of PET,thereby providing a potential method for improving system efficiency.
基金Supported by Commission of Science Technology and Industry for National Defense(No, C192005C001)
文摘Data envelopment analysis(DEA) model is widely used to evaluate the relative efficiency of producers. It is a kind of objective decision method with multiple indexes. However, the two basic models frequently used at present, the C2R model and the C2GS2 model have limitations when used alone,resulting in evaluations that are often unsatisfactory. In order to solve this problem, a mixed DEA model is built and is used to evaluate the validity of the business efficiency of listed companies. An explanation of how to use this mixed DEA model is offered and its feasibility is verified.
基金supported by the National High-Tech R&D Program(863 Program 2015AA01A705)
文摘Massive MIMO is one of tile enabling technologies tbr beyond 4G and 5G systems due to its ability to provide beamforming gain and reduce interference Dual-polarized antenna is widely adopted to accommodate a large number of antenna elements in limited space. However, current CSI（channel state information） feedback schemes developed in LTE for conventional MIMO systems are not efficient enough for massive MIMO systems since the overhead increases almost linearly with the number of antenna. Moreover, the codebook for massive MIMO will be huge and difficult to design with the LTE methodology. This paper proposes a novel CSI feedback scheme named layered Multi-paths Information based CSI Feedback （LMPIF）, which can achieve higher spectrum efficiency for dual-polarized antenna system with low feedback overhead. The MIMO channel is decomposed into long term components （multipath directions and amplitudes） and short term components （multipath phases）. The relationship between the two components and the optimal precoder is derived in closed form. To reduce the overhead, different granularities in feedback time have been applied for the long term components and short term components Link and system level simulation results prove that LMPIF can improve performance considerably with low CSI feedback overhead.
