In recent years,the demand for synchronous acquisition of three-dimensional(3D)shape and col-or texture has surged in fields such as cultural heritage preservation and healthcare.Addressing this need,this paper propos...In recent years,the demand for synchronous acquisition of three-dimensional(3D)shape and col-or texture has surged in fields such as cultural heritage preservation and healthcare.Addressing this need,this paper proposes a novel method for simultaneous 3D shape and color texture capture.First,a linear model correlating camera exposure time with grayscale values is established.Through exposure time calibration,the projected red,green and blue(RGB)light and white-light grayscale values captured by a monochrome cam-era are aligned.Then,three sets of color fringes are projected onto the object to identify optimal pixels for 3D reconstruction.And,three pure-color patterns are projected to synthesize the color texture.Experimental res-ults show that this method effectively achieves synchronous 3D shape and color texture acquisition,offering high speed and precision,and avoids color crosstalk interference common in 3D reconstruction of colored ob-jects using a monochrome camera.展开更多
In the past few years,efforts have been made to extend the sensitivity of surface nuclear magnetic resonance(SNMR)to short relaxation times,typical for strongly bound water,which,for example,occurs in partially satura...In the past few years,efforts have been made to extend the sensitivity of surface nuclear magnetic resonance(SNMR)to short relaxation times,typical for strongly bound water,which,for example,occurs in partially saturated soils.The two limiting factors for the sensitivity are the dead time after the excitation pulse and the duration of the pulse itself.To enable short pulses,while also achieving proper depths of investigation,high pulse amplitudes are needed.This makes it necessary to consider the Bloch-Siegert effect,i.e.the counter-rotating component and the parallel component of the excitation field have significant influence on the excitation.If an untuned transmitter circuit is used,the pulse shape will also be non-sinusoidal.In this paper,we demonstrate that this influences SNMR measurements with short pulses in two ways:On one hand,the pulse shape influences the phase of the fundamental frequency oscillation.On the other,at very high pulse amplitudes,other frequency components of the excitation field start to influence the excitation.The behavior of the macroscopic magnetizations in the subsurface during the pulse is simulated by solving the Bloch equations,using the pulse shape as an input.Since these calculations are computational expensive,we propose a lookup scheme that allows a time efficient modeling of the obtained SNMR data.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,mate...The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,material strength dictates the resistance to plastic deformation and flow,a contrast to the shockwave-dominated interactions where compressibility is key.This paper presents a self-consistent compressible penetration theory that considers both the axial penetration and radial crater growth of shaped charge jets into targets.An integrated approach where the axial and radial dynamics are coupled has been proposed,influencing each other through shared physical principles rather than being treated as separate,empirically linked phenomena.The presented theory is rooted in the compressible Bernoulli equation and the linear Rankine-Hugoniot relation.These foundational equations are employed to accurately model the high-pressure shock state and subsequent material flow at the jet-target interface,providing a robust physical basis for the penetration model.Notably,it considers the target material's compressibility,which elevates the pressure at the jet-target interface beyond that observed with incompressible materials.This pressure increase is directly proportional to the target's degree of compressibility.As such,this model of compressible penetration reorients the analytical approach:rather than merely estimating penetration resistance,it determines this value from the target material's specific compressibility and yield strength.This shift from empirical correlations to a physics-based derivation of penetration resistance enhances the model's predictive power,particularly for novel target materials or engagement conditions outside established experimental datasets.This investigation establishes a quantitative link between the material's yield strength and its penetration resistance.The accuracy of this penetration resistance value is paramount,as it significantly influences the predicted crater diameter;indeed,the crater diameter's sensitivity to this resistance underscores the necessity for its precise determination.Ultimately,by integrating the yield strength of the target material,this framework enables the prediction of both the penetration depth and the resultant crater diameter from a shaped charge jet.The theory's validation involved two experimental sets:the first focused on shaped charge jet penetration into 45#steel at varied stand-offs,while the second utilized targets of high-to ultrahigh-strength steel-fiber reactive powder concrete(RPC)with differing strength characteristics.These experimental campaigns were specifically chosen to test the theory against both ductile metallic alloys,where plastic flow is significant,and advanced quasi-brittle cementitious composites,presenting a broad spectrum of material responses and penetration challenges.Resulting hole profiles derived from theoretical calculations demonstrated a strong correspondence with empirical measurements for both material types.展开更多
Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicate...Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.展开更多
A Shape Memory Polymer Composite(SMPC)is developed by reinforcing an epoxy-based polymer with randomly oriented short glass fibers.Diverging from previous research,which primarily focused on the hot programming of sho...A Shape Memory Polymer Composite(SMPC)is developed by reinforcing an epoxy-based polymer with randomly oriented short glass fibers.Diverging from previous research,which primarily focused on the hot programming of short glass fiber-based SMPCs,this work explores the potential for programming below the glass transition temperature(Tg)for epoxy-based SMPCs.To mitigate the inherent brittleness of the SMPC during deformation,a linear polymer is incorporated,and a temperature between room temperature and Tg is chosen as the deformation temperature to study the shape memory properties.The findings demonstrate an enhancement in shape fixity and recovery stress,alongside a reduction in shape recovery,with the incorporation of short glass fibers.In addition to tensile properties,thermal properties such as thermal conductivity,specific heat capacity,and glass transition temperature are investigated for their dependence on fiber content.Microscopic properties,such as fiber-matrix adhesion and the dispersion of glass fibers,are examined through Scanning Electron Microscope imaging.The fiber length distribution and mean fiber lengths are also measured for different fiber fractions.展开更多
The active development of space industry necessitates the cre-ation of novel materials with unique properties,including shape memory alloys(SMAs).The development of ultra-high temperature SMAs(UHTSMAs)with operating t...The active development of space industry necessitates the cre-ation of novel materials with unique properties,including shape memory alloys(SMAs).The development of ultra-high temperature SMAs(UHTSMAs)with operating temperatures above 400℃is a significant challenge[1-3].It is known that reversible thermoelas-tic martensitic transformation(MT)is the basis for shape mem-ory behavior[4].Currently,there are several systems in which MT temperatures meet the above requirements,for example,RuNb[5],HfPd[6],TiPd[7].展开更多
Metamaterials,owing to their exceptional physical characteristics that are absent in natural materials,have emerged as a crucial constituent of intelligent devices and systems.However,there are still significant chall...Metamaterials,owing to their exceptional physical characteristics that are absent in natural materials,have emerged as a crucial constituent of intelligent devices and systems.However,there are still significant challenges that necessitate immediate attention,as they have considerably constrained the applicability of metamaterials,including fixed mechanical properties post-fabrication and restricted design freedom.Here,thermo-responsive,photo-responsive,electro-responsive,and magneto-responsive shape memory polymer nano-composites were developed,and shape memory gradient metamaterials were fabricated using multi-material 4D printing technology.The correlation mechanism between the design parameters and the mechanical properties of multi-responsive gradient metamaterials was systematically analyzed,and the highly designable and programmable configuration and mechanical properties of the gradient metamaterials were realized.More importantly,4D printed multi-responsive shape memory polymer gradient metamaterials can be programmed in situ without additional infrastructure for multi-functional mechanical functions,paving the way for the realization of multiple functions of a single structure.Based on the multi-responsive gradient metamaterials,4D printed digital pixel metamaterial intelligent information carriers were fabricated,featuring customizable encryption and decryption protocols,exceptional scalability,and reusability.Additionally,4D printed gradient metamaterial logic gate electronic devices were developed,which were anticipated to contribute to the development of smart,adaptable robotic systems that combine sensing,actuation,and decision-making capabilities.展开更多
This study explores the phenomenon of shape coexistence in nuclei around^(172)Hg,with a focus on the isotopes^(170)Pt,^(172)Hg,and^(174)Pb,as well as the^(170)Pt to^(180)Pt isotopic chain.Utilizing a macro-microscopic...This study explores the phenomenon of shape coexistence in nuclei around^(172)Hg,with a focus on the isotopes^(170)Pt,^(172)Hg,and^(174)Pb,as well as the^(170)Pt to^(180)Pt isotopic chain.Utilizing a macro-microscopic approach that incorporates the Lublin-Strasbourg Drop model combined with a Yukawa-Folded potential and pairing corrections,we analyze the potential energy surfaces(PESs)to understand the impact of pairing interaction.For^(170)Pt,the PES exhibited a prolate ground state,with additional triaxial and oblate-shaped isomers.In^(172)Hg,the ground-state deformation transitions from triaxial to oblate with increasing pairing interaction,demonstrating its nearlyγ-unstable nature.Three shape isomers(prolate,triaxial,and oblate)were observed,with increased pairing strength leading to the disappearance of the triaxial isomer.^(174)Pb exhibited a prolate ground state that became increasingly spherical with stronger pairing.While shape isomers were present at lower pairing strengths,robust shape coexistence was not observed.For realistic pairing interaction,the ground-state shapes transitioned from prolate in^(170)Pt to a coexistence ofγ-unstable and oblate shapes in^(172)Hg,ultimately approaching spherical symmetry in^(174)Pb.A comparison between Exact and Bardeen-Cooper-Schrieffer(BCS)pairing demonstrated that BCS pairing tends to smooth out shape coexistence and reduce the depth of the shape isomer,leading to less pronounced deformation features.The PESs for even-even^(170)-180 Pt isotopes revealed significant shape evolution.^(170)Pt showed a prolate ground state,whereas^(172)Pt exhibited both triaxial and prolate shape coexistence.In^(174)Pt,the ground state was triaxial,coexisted with a prolate minimum.For^(176)Pt,aγ-unstable ground state coexists with a prolate minimum.By 178 Pt and 180Pt,a dominant prolate minimum emerged.These results highlight the role of shape coexistence andγ-instability in the evolution of nuclear structure,especially in the mid-shell region.These findings highlight the importance of pairing interactions in nuclear deformation and shape coexistence,providing insights into the structural evolution of mid-shell nuclei.展开更多
Shape memory alloys(SMAs)and shape memory ceramics(SMCs)exhibit high recovery ability due to the martensitic transformation,which complicates the fracture mechanism of SMAs and SMCs.The phase field method,as a powerfu...Shape memory alloys(SMAs)and shape memory ceramics(SMCs)exhibit high recovery ability due to the martensitic transformation,which complicates the fracture mechanism of SMAs and SMCs.The phase field method,as a powerful numerical simulation tool,can efficiently resolve the microstructural evolution,multi-field coupling effects,and fracture behavior of SMAs and SMCs.This review begins by presenting the fundamental theoretical framework of the fracture phase field method as applied to SMAs and SMCs,covering key aspects such as the phase field modeling of martensitic transformation and brittle fracture.Subsequently,it systematically examines the phase field simulations of fracture behaviors in SMAs and SMCs,with particular emphasis on how crystallographic orientation,grain size,and grain boundary properties influence the crack propagation.Additionally,the interplay between martensite transformation and fracture mechanisms is analyzed to provide deeper insights into the material responses under mechanical loading.Finally,the review explores future prospects and emerging trends in phase field simulations of SMA and SMC fracture behavior,along with potential advancements in the fracture phase field method itself,including multi-physics coupling and enhanced computational efficiency for large-scale simulations.展开更多
This article presents a detailed theoretical hybrid analysis of the magnetism and the thermal radiative heat transfer in the presence of heat generation affecting the behavior of the dispersed gold nanoparticles(AuNPs...This article presents a detailed theoretical hybrid analysis of the magnetism and the thermal radiative heat transfer in the presence of heat generation affecting the behavior of the dispersed gold nanoparticles(AuNPs)through the blood vessels of the human body.The rheology of gold-blood nanofluid is treated as magnetohydrodynamic(MHD)flow with ferromagnetic properties.The AuNPs take different shapes as bricks,cylinders,and platelets which are considered in changing the nanofluid flow behavior.Physiologically,the blood is circulated under the kinetics of the peristaltic action.The mixed properties of the slip flow,the gravity,the space porosity,the transverse ferromagnetic field,the thermal radiation,the nanoparticles shape factors,the peristaltic amplitude ratio,and the concentration of the AuNPs are interacted and analyzed for the gold-blood circulation in the inclined tube.The appropriate model for the thermal conductivity of the nanofluid is chosen to be the effective Hamilton-Crosser model.The undertaken nanofluid can be treated as incompressible non-Newtonian ferromagnetic fluid.The solutions of the partial differential governing equations of the MHD nanofluid flow are executed by the strategy of perturbation approach under the assumption of long wavelength and low Reynolds number.Graphs for the streamwise velocity distributions,temperature distributions,pressure gradients,pressure drops,and streamlines are presented under the influences of the pertinent properties.The practical implementation of this research finds application in treating cancer through a technique known as photothermal therapy(PTT).The results indicate the control role of the magnetism,the heat generation,the shape factors of the AuNPs,and its concentration on the enhancement of the thermal properties and the streamwise velocity of the nanofluid.The results reveal a marked enhancement in the temperature profiles of the nanofluid,prominently influenced by both the intensified heat source and the heightened volume fractions of the nanoparticles.Furthermore,the platelet shape is regarded as most advantageous for heat conduction owing to its highest effective thermal conductivity.AuNPs proved strong efficiency in delivering and targeting the drug to reach the affected area with tumors.These results offer valuable insights into evaluating the effectiveness of PTT in addressing diverse cancer conditions and regulating their progression.展开更多
Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show ...Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.展开更多
The constitutive models of shape memory alloys(SMAs)play an important role in facilitating the widespread application of such types of alloys in various engineering fields.However,to accurately describe the deformatio...The constitutive models of shape memory alloys(SMAs)play an important role in facilitating the widespread application of such types of alloys in various engineering fields.However,to accurately describe the deformation behaviors of SMAs,the concepts in classical plasticity are employed in the existing constitutive models,and a series of complex mathematical equations are involved.Such complexity brings inconvenience for the construction,implementation,and application of the constitutive models.To overcome these shortcomings,a data-driven constitutive model of SMAs is developed in this work based on the artificial neural network(ANN).In the proposed model,the components of the strain tensor in principal space,ambient temperature,and the maximum equivalent strain in the deformation history from the initial state to the current loading state are chosen as the input features,and the components of the stress tensor in principal space are set as the output.The proposed ANN-based constitutive model is implemented into the finite element program ABAQUS by deriving its consistent tangent modulus and writing a user-defined material subroutine.The stress-strain responses of SMA material under various loading paths and at different ambient temperatures are used to train the ANN model,which is generated from the existing constitutive model(numerical experiments).To validate the capability of the proposed model,the predicted stress-strain responses of SMA material,and the global and local responses of two typical SMA structures are compared with the corresponding numerical experiments.This work demonstrates a good potential to obtain the constitutive model of SMAs by pure data and avoid the need for vast stores of knowledge for the construction of constitutive models.展开更多
Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of sh...Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of shaped charge jets in water as well as the underwater penetration effect of concrete need to be studied.In this paper,we introduced a modified forming theory of an underwater hemispherical shaped charge,and investigated the behavior of jet formation and concrete penetration in both air and water experimentally and numerically.The results show that the modified jet forming theory predicts the jet velocity of the hemispherical liner with an error of less than 10%.The underwater jets exhibit at least 3%faster and 11%longer than those in air.Concrete shows different failure modes after penetration in air and water.The depth of penetration deepens at least 18.75%after underwater penetration,accompanied by deeper crater with 65%smaller radius.Moreover,cracks throughout the entire target are formed,whereas cracks exist only near the penetration hole in air.This comprehensive study provides guidance for optimizing the structure of shaped charge and improves the understanding of the permeability effect of concrete in water.展开更多
To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with...To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with rectangular,circular,and D-shaped holes.Asθincreases from 0°to 60°in the rectangular hole,the left failure location shifts from the left corner to the left sidewall,the left corner,and then the floor,while the right failure location shifts from the right corner to the right sidewall,right roof corner,and then the roof.Furthermore,the initial failure vertical stress first decreases and then increases.In comparison,the failure severity in the rectangular hole decreases for variousθvalues as 30°>45°>60°>0°.With increasingθ,the fractal dimension(D)of rock slices first increases and then decreases.For the rectangular and D-shaped holes,whenθ=0°,30°,and 90°,D for the rectangular hole is less than that of the D-shaped hole.Whenθ=45°and 60°,D for the rectangular hole is greater than that of the D-shaped hole.Theoretical analysis indicates that the stress concentration at the rectangular and D-shaped corners is greater than the other areas.The failure location rotates with the rotation ofθ,and the failure occurs on the side with a high concentration of compressive stress,while the side with the tensile and compressive stresses remains relatively stable.Therefore,the fundamental reason for the rotation of failure location is the rotation of stress concentration,and the external influencing factor is the rotation ofθ.展开更多
The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure ...The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.展开更多
As an essential field of multimedia and computer vision,3D shape recognition has attracted much research attention in recent years.Multiview-based approaches have demonstrated their superiority in generating effective...As an essential field of multimedia and computer vision,3D shape recognition has attracted much research attention in recent years.Multiview-based approaches have demonstrated their superiority in generating effective 3D shape representations.Typical methods usually extract the multiview global features and aggregate them together to generate 3D shape descriptors.However,there exist two disadvantages:First,the mainstream methods ignore the comprehensive exploration of local information in each view.Second,many approaches roughly aggregate multiview features by adding or concatenating them together.The information loss for some discriminative characteristics limits the representation effectiveness.To address these problems,a novel architecture named region-based joint attention network(RJAN)was proposed.Specifically,the authors first design a hierarchical local information exploration module for view descriptor extraction.The region-to-region and channel-to-channel relationships from different granularities can be comprehensively explored and utilised to provide more discriminative characteristics for view feature learning.Subsequently,a novel relation-aware view aggregation module is designed to aggregate the multiview features for shape descriptor generation,considering the view-to-view relationships.Extensive experiments were conducted on three public databases:ModelNet40,ModelNet10,and ShapeNetCore55.RJAN achieves state-of-the-art performance in the tasks of 3D shape classification and 3D shape retrieval,which demonstrates the effectiveness of RJAN.The code has been released on https://github.com/slurrpp/RJAN.展开更多
文摘In recent years,the demand for synchronous acquisition of three-dimensional(3D)shape and col-or texture has surged in fields such as cultural heritage preservation and healthcare.Addressing this need,this paper proposes a novel method for simultaneous 3D shape and color texture capture.First,a linear model correlating camera exposure time with grayscale values is established.Through exposure time calibration,the projected red,green and blue(RGB)light and white-light grayscale values captured by a monochrome cam-era are aligned.Then,three sets of color fringes are projected onto the object to identify optimal pixels for 3D reconstruction.And,three pure-color patterns are projected to synthesize the color texture.Experimental res-ults show that this method effectively achieves synchronous 3D shape and color texture acquisition,offering high speed and precision,and avoids color crosstalk interference common in 3D reconstruction of colored ob-jects using a monochrome camera.
基金funded by the German Research Foundation(Deutsche Forschungsgemeinschaft-DFG)under grant MU 3318/8-1.
文摘In the past few years,efforts have been made to extend the sensitivity of surface nuclear magnetic resonance(SNMR)to short relaxation times,typical for strongly bound water,which,for example,occurs in partially saturated soils.The two limiting factors for the sensitivity are the dead time after the excitation pulse and the duration of the pulse itself.To enable short pulses,while also achieving proper depths of investigation,high pulse amplitudes are needed.This makes it necessary to consider the Bloch-Siegert effect,i.e.the counter-rotating component and the parallel component of the excitation field have significant influence on the excitation.If an untuned transmitter circuit is used,the pulse shape will also be non-sinusoidal.In this paper,we demonstrate that this influences SNMR measurements with short pulses in two ways:On one hand,the pulse shape influences the phase of the fundamental frequency oscillation.On the other,at very high pulse amplitudes,other frequency components of the excitation field start to influence the excitation.The behavior of the macroscopic magnetizations in the subsurface during the pulse is simulated by solving the Bloch equations,using the pulse shape as an input.Since these calculations are computational expensive,we propose a lookup scheme that allows a time efficient modeling of the obtained SNMR data.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
基金the Fundamental Research Funds for the Central Universities of Nanjing University of Science and Technology(CN)under Grant No.30924010803。
文摘The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,material strength dictates the resistance to plastic deformation and flow,a contrast to the shockwave-dominated interactions where compressibility is key.This paper presents a self-consistent compressible penetration theory that considers both the axial penetration and radial crater growth of shaped charge jets into targets.An integrated approach where the axial and radial dynamics are coupled has been proposed,influencing each other through shared physical principles rather than being treated as separate,empirically linked phenomena.The presented theory is rooted in the compressible Bernoulli equation and the linear Rankine-Hugoniot relation.These foundational equations are employed to accurately model the high-pressure shock state and subsequent material flow at the jet-target interface,providing a robust physical basis for the penetration model.Notably,it considers the target material's compressibility,which elevates the pressure at the jet-target interface beyond that observed with incompressible materials.This pressure increase is directly proportional to the target's degree of compressibility.As such,this model of compressible penetration reorients the analytical approach:rather than merely estimating penetration resistance,it determines this value from the target material's specific compressibility and yield strength.This shift from empirical correlations to a physics-based derivation of penetration resistance enhances the model's predictive power,particularly for novel target materials or engagement conditions outside established experimental datasets.This investigation establishes a quantitative link between the material's yield strength and its penetration resistance.The accuracy of this penetration resistance value is paramount,as it significantly influences the predicted crater diameter;indeed,the crater diameter's sensitivity to this resistance underscores the necessity for its precise determination.Ultimately,by integrating the yield strength of the target material,this framework enables the prediction of both the penetration depth and the resultant crater diameter from a shaped charge jet.The theory's validation involved two experimental sets:the first focused on shaped charge jet penetration into 45#steel at varied stand-offs,while the second utilized targets of high-to ultrahigh-strength steel-fiber reactive powder concrete(RPC)with differing strength characteristics.These experimental campaigns were specifically chosen to test the theory against both ductile metallic alloys,where plastic flow is significant,and advanced quasi-brittle cementitious composites,presenting a broad spectrum of material responses and penetration challenges.Resulting hole profiles derived from theoretical calculations demonstrated a strong correspondence with empirical measurements for both material types.
基金Project supported by the Basic Science Research Program through the National Research Foundation(NRF)of Korea funded by the Ministry of Science and ICT(No.RS-2024-00337001)。
文摘Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.
文摘A Shape Memory Polymer Composite(SMPC)is developed by reinforcing an epoxy-based polymer with randomly oriented short glass fibers.Diverging from previous research,which primarily focused on the hot programming of short glass fiber-based SMPCs,this work explores the potential for programming below the glass transition temperature(Tg)for epoxy-based SMPCs.To mitigate the inherent brittleness of the SMPC during deformation,a linear polymer is incorporated,and a temperature between room temperature and Tg is chosen as the deformation temperature to study the shape memory properties.The findings demonstrate an enhancement in shape fixity and recovery stress,alongside a reduction in shape recovery,with the incorporation of short glass fibers.In addition to tensile properties,thermal properties such as thermal conductivity,specific heat capacity,and glass transition temperature are investigated for their dependence on fiber content.Microscopic properties,such as fiber-matrix adhesion and the dispersion of glass fibers,are examined through Scanning Electron Microscope imaging.The fiber length distribution and mean fiber lengths are also measured for different fiber fractions.
基金supported by the National Natural Science Foundation of China(Nos.52201207 and 52271169)the Fundamental Research Funds for the Central University(No.3072024LJ1002).
文摘The active development of space industry necessitates the cre-ation of novel materials with unique properties,including shape memory alloys(SMAs).The development of ultra-high temperature SMAs(UHTSMAs)with operating temperatures above 400℃is a significant challenge[1-3].It is known that reversible thermoelas-tic martensitic transformation(MT)is the basis for shape mem-ory behavior[4].Currently,there are several systems in which MT temperatures meet the above requirements,for example,RuNb[5],HfPd[6],TiPd[7].
基金supported by the National Key R&D Program of China(2022YFB3805700)the National Natural Science Foundation of China(Grant No.12302198)+2 种基金China Postdoctoral Science Foundation(2022M720042)Heilongjiang Postdoctoral Science Foundation(LBH-Z22016)Key Project of Heilongjiang Provincial Department of Science and Technology(2022ZX02C25).
文摘Metamaterials,owing to their exceptional physical characteristics that are absent in natural materials,have emerged as a crucial constituent of intelligent devices and systems.However,there are still significant challenges that necessitate immediate attention,as they have considerably constrained the applicability of metamaterials,including fixed mechanical properties post-fabrication and restricted design freedom.Here,thermo-responsive,photo-responsive,electro-responsive,and magneto-responsive shape memory polymer nano-composites were developed,and shape memory gradient metamaterials were fabricated using multi-material 4D printing technology.The correlation mechanism between the design parameters and the mechanical properties of multi-responsive gradient metamaterials was systematically analyzed,and the highly designable and programmable configuration and mechanical properties of the gradient metamaterials were realized.More importantly,4D printed multi-responsive shape memory polymer gradient metamaterials can be programmed in situ without additional infrastructure for multi-functional mechanical functions,paving the way for the realization of multiple functions of a single structure.Based on the multi-responsive gradient metamaterials,4D printed digital pixel metamaterial intelligent information carriers were fabricated,featuring customizable encryption and decryption protocols,exceptional scalability,and reusability.Additionally,4D printed gradient metamaterial logic gate electronic devices were developed,which were anticipated to contribute to the development of smart,adaptable robotic systems that combine sensing,actuation,and decision-making capabilities.
基金supported by the National Natural Science Foundation of China(Nos.12275115 and 12175097)the National Science Centre of Poland(No.2023/49/B/ST2/01294).
文摘This study explores the phenomenon of shape coexistence in nuclei around^(172)Hg,with a focus on the isotopes^(170)Pt,^(172)Hg,and^(174)Pb,as well as the^(170)Pt to^(180)Pt isotopic chain.Utilizing a macro-microscopic approach that incorporates the Lublin-Strasbourg Drop model combined with a Yukawa-Folded potential and pairing corrections,we analyze the potential energy surfaces(PESs)to understand the impact of pairing interaction.For^(170)Pt,the PES exhibited a prolate ground state,with additional triaxial and oblate-shaped isomers.In^(172)Hg,the ground-state deformation transitions from triaxial to oblate with increasing pairing interaction,demonstrating its nearlyγ-unstable nature.Three shape isomers(prolate,triaxial,and oblate)were observed,with increased pairing strength leading to the disappearance of the triaxial isomer.^(174)Pb exhibited a prolate ground state that became increasingly spherical with stronger pairing.While shape isomers were present at lower pairing strengths,robust shape coexistence was not observed.For realistic pairing interaction,the ground-state shapes transitioned from prolate in^(170)Pt to a coexistence ofγ-unstable and oblate shapes in^(172)Hg,ultimately approaching spherical symmetry in^(174)Pb.A comparison between Exact and Bardeen-Cooper-Schrieffer(BCS)pairing demonstrated that BCS pairing tends to smooth out shape coexistence and reduce the depth of the shape isomer,leading to less pronounced deformation features.The PESs for even-even^(170)-180 Pt isotopes revealed significant shape evolution.^(170)Pt showed a prolate ground state,whereas^(172)Pt exhibited both triaxial and prolate shape coexistence.In^(174)Pt,the ground state was triaxial,coexisted with a prolate minimum.For^(176)Pt,aγ-unstable ground state coexists with a prolate minimum.By 178 Pt and 180Pt,a dominant prolate minimum emerged.These results highlight the role of shape coexistence andγ-instability in the evolution of nuclear structure,especially in the mid-shell region.These findings highlight the importance of pairing interactions in nuclear deformation and shape coexistence,providing insights into the structural evolution of mid-shell nuclei.
基金supported by the National Natural Science Foundation of China(12202294)the Sichuan Science and Technology Program(2024NSFSC1346).
文摘Shape memory alloys(SMAs)and shape memory ceramics(SMCs)exhibit high recovery ability due to the martensitic transformation,which complicates the fracture mechanism of SMAs and SMCs.The phase field method,as a powerful numerical simulation tool,can efficiently resolve the microstructural evolution,multi-field coupling effects,and fracture behavior of SMAs and SMCs.This review begins by presenting the fundamental theoretical framework of the fracture phase field method as applied to SMAs and SMCs,covering key aspects such as the phase field modeling of martensitic transformation and brittle fracture.Subsequently,it systematically examines the phase field simulations of fracture behaviors in SMAs and SMCs,with particular emphasis on how crystallographic orientation,grain size,and grain boundary properties influence the crack propagation.Additionally,the interplay between martensite transformation and fracture mechanisms is analyzed to provide deeper insights into the material responses under mechanical loading.Finally,the review explores future prospects and emerging trends in phase field simulations of SMA and SMC fracture behavior,along with potential advancements in the fracture phase field method itself,including multi-physics coupling and enhanced computational efficiency for large-scale simulations.
文摘This article presents a detailed theoretical hybrid analysis of the magnetism and the thermal radiative heat transfer in the presence of heat generation affecting the behavior of the dispersed gold nanoparticles(AuNPs)through the blood vessels of the human body.The rheology of gold-blood nanofluid is treated as magnetohydrodynamic(MHD)flow with ferromagnetic properties.The AuNPs take different shapes as bricks,cylinders,and platelets which are considered in changing the nanofluid flow behavior.Physiologically,the blood is circulated under the kinetics of the peristaltic action.The mixed properties of the slip flow,the gravity,the space porosity,the transverse ferromagnetic field,the thermal radiation,the nanoparticles shape factors,the peristaltic amplitude ratio,and the concentration of the AuNPs are interacted and analyzed for the gold-blood circulation in the inclined tube.The appropriate model for the thermal conductivity of the nanofluid is chosen to be the effective Hamilton-Crosser model.The undertaken nanofluid can be treated as incompressible non-Newtonian ferromagnetic fluid.The solutions of the partial differential governing equations of the MHD nanofluid flow are executed by the strategy of perturbation approach under the assumption of long wavelength and low Reynolds number.Graphs for the streamwise velocity distributions,temperature distributions,pressure gradients,pressure drops,and streamlines are presented under the influences of the pertinent properties.The practical implementation of this research finds application in treating cancer through a technique known as photothermal therapy(PTT).The results indicate the control role of the magnetism,the heat generation,the shape factors of the AuNPs,and its concentration on the enhancement of the thermal properties and the streamwise velocity of the nanofluid.The results reveal a marked enhancement in the temperature profiles of the nanofluid,prominently influenced by both the intensified heat source and the heightened volume fractions of the nanoparticles.Furthermore,the platelet shape is regarded as most advantageous for heat conduction owing to its highest effective thermal conductivity.AuNPs proved strong efficiency in delivering and targeting the drug to reach the affected area with tumors.These results offer valuable insights into evaluating the effectiveness of PTT in addressing diverse cancer conditions and regulating their progression.
基金funded by the National Natural Science Founda-tion of China(52071109).
文摘Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.
基金supported by the National Natural Science Foundation of China(NSFC)(Grant No.12322203).
文摘The constitutive models of shape memory alloys(SMAs)play an important role in facilitating the widespread application of such types of alloys in various engineering fields.However,to accurately describe the deformation behaviors of SMAs,the concepts in classical plasticity are employed in the existing constitutive models,and a series of complex mathematical equations are involved.Such complexity brings inconvenience for the construction,implementation,and application of the constitutive models.To overcome these shortcomings,a data-driven constitutive model of SMAs is developed in this work based on the artificial neural network(ANN).In the proposed model,the components of the strain tensor in principal space,ambient temperature,and the maximum equivalent strain in the deformation history from the initial state to the current loading state are chosen as the input features,and the components of the stress tensor in principal space are set as the output.The proposed ANN-based constitutive model is implemented into the finite element program ABAQUS by deriving its consistent tangent modulus and writing a user-defined material subroutine.The stress-strain responses of SMA material under various loading paths and at different ambient temperatures are used to train the ANN model,which is generated from the existing constitutive model(numerical experiments).To validate the capability of the proposed model,the predicted stress-strain responses of SMA material,and the global and local responses of two typical SMA structures are compared with the corresponding numerical experiments.This work demonstrates a good potential to obtain the constitutive model of SMAs by pure data and avoid the need for vast stores of knowledge for the construction of constitutive models.
基金supported by the National Science Foundation of China(Grant Nos.12372361,12102427,12372335 and 12102202)the Fundamental Research Funds for the Central Universities(Grant No.30923010908)Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX23_0520).
文摘Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of shaped charge jets in water as well as the underwater penetration effect of concrete need to be studied.In this paper,we introduced a modified forming theory of an underwater hemispherical shaped charge,and investigated the behavior of jet formation and concrete penetration in both air and water experimentally and numerically.The results show that the modified jet forming theory predicts the jet velocity of the hemispherical liner with an error of less than 10%.The underwater jets exhibit at least 3%faster and 11%longer than those in air.Concrete shows different failure modes after penetration in air and water.The depth of penetration deepens at least 18.75%after underwater penetration,accompanied by deeper crater with 65%smaller radius.Moreover,cracks throughout the entire target are formed,whereas cracks exist only near the penetration hole in air.This comprehensive study provides guidance for optimizing the structure of shaped charge and improves the understanding of the permeability effect of concrete in water.
基金supported by the National Natural Science Foundation of China (Grant Nos.52304227 and 52104133)Scientific and Technological Research Platform for Disaster Prevention and Control of Deep Coal Mining (Anhui University of Science and Technology) (Grant No.DPDCM2208).
文摘To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with rectangular,circular,and D-shaped holes.Asθincreases from 0°to 60°in the rectangular hole,the left failure location shifts from the left corner to the left sidewall,the left corner,and then the floor,while the right failure location shifts from the right corner to the right sidewall,right roof corner,and then the roof.Furthermore,the initial failure vertical stress first decreases and then increases.In comparison,the failure severity in the rectangular hole decreases for variousθvalues as 30°>45°>60°>0°.With increasingθ,the fractal dimension(D)of rock slices first increases and then decreases.For the rectangular and D-shaped holes,whenθ=0°,30°,and 90°,D for the rectangular hole is less than that of the D-shaped hole.Whenθ=45°and 60°,D for the rectangular hole is greater than that of the D-shaped hole.Theoretical analysis indicates that the stress concentration at the rectangular and D-shaped corners is greater than the other areas.The failure location rotates with the rotation ofθ,and the failure occurs on the side with a high concentration of compressive stress,while the side with the tensile and compressive stresses remains relatively stable.Therefore,the fundamental reason for the rotation of failure location is the rotation of stress concentration,and the external influencing factor is the rotation ofθ.
基金financial support from the National Natural Science Foundation of China(Grant No.11572159).
文摘The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.
基金the National Key Research and Development Program of China,Grant/Award Number:2020YFB1711704the National Natural Science Foundation of China,Grant/Award Number:62272337。
文摘As an essential field of multimedia and computer vision,3D shape recognition has attracted much research attention in recent years.Multiview-based approaches have demonstrated their superiority in generating effective 3D shape representations.Typical methods usually extract the multiview global features and aggregate them together to generate 3D shape descriptors.However,there exist two disadvantages:First,the mainstream methods ignore the comprehensive exploration of local information in each view.Second,many approaches roughly aggregate multiview features by adding or concatenating them together.The information loss for some discriminative characteristics limits the representation effectiveness.To address these problems,a novel architecture named region-based joint attention network(RJAN)was proposed.Specifically,the authors first design a hierarchical local information exploration module for view descriptor extraction.The region-to-region and channel-to-channel relationships from different granularities can be comprehensively explored and utilised to provide more discriminative characteristics for view feature learning.Subsequently,a novel relation-aware view aggregation module is designed to aggregate the multiview features for shape descriptor generation,considering the view-to-view relationships.Extensive experiments were conducted on three public databases:ModelNet40,ModelNet10,and ShapeNetCore55.RJAN achieves state-of-the-art performance in the tasks of 3D shape classification and 3D shape retrieval,which demonstrates the effectiveness of RJAN.The code has been released on https://github.com/slurrpp/RJAN.
