Background While maternal proline(Pro)supplementation has demonstrated efficacy in enhancing placental angiogenesis and farrowing efficiency in swine,its regulatory role in fetal skeletal muscle ontogeny remains undef...Background While maternal proline(Pro)supplementation has demonstrated efficacy in enhancing placental angiogenesis and farrowing efficiency in swine,its regulatory role in fetal skeletal muscle ontogeny remains undefined.This study systematically evaluated the temporal-specific impacts of dietary Pro supplementation during critical phases of fetal myogenesis(encompassing primary myofiber formation and secondary myofiber hyperplasia)on offspring muscle development.A total of 120 sows with similar farrowing schedules were assigned to three groups:CON(basal diet),ST-Pro(0.5%Pro supplementation during secondary myofiber formation period,from d 60 gestation to farrowing),LT-Pro(0.5%Pro supplementation spanning primary and secondary myofiber formation period:from d 20 gestation to farrowing).Results LT-Pro group significantly increased the longissimus dorsi(LD)muscle mass per unit body weight in newborn piglets compared to CON group(P<0.05),while no such effect was observed in the ST-Pro group.Metabolomic profiling revealed elevated Pro,lysine,and tryptophan levels in the LD muscle of LT-Pro group piglets,accompanied by reduced branched-chain amino acids(BCAAs;leucine,isoleucine,and valine)in both serum and muscle(P<0.05).Histological analysis demonstrated a 45.74%increase in myofiber cross-sectional area in the LT-Pro group(P<0.05).At the molecular level,LT-Pro group piglets exhibited upregulated mRNA expression levels of myogenic regulatory genes(MYOD1,MYF6)and the cell cycle accelerator CCND1(P<0.05),coupled with activation of the STAT3 signaling pathway(phosphorylated STAT3 protein increased by 2.53-fold,P<0.01).Furthermore,Pro supplementation enhanced oxidative metabolism,evidenced by elevated mitochondrial biogenesis markers(the mRNA expression levels of PPARGC1A,OPA1,and SQSTM1)and a 61.58%increase in succinate dehydrogenase activity(P<0.05).Notably,LT-Pro group piglets showed a selective shift toward slow-twitch oxidative fibers,with both MyHC1 mRNA and protein expression levels significantly upregulated(P<0.05),while the mRNA expression levels of MyHCIIb showed no significant change.Conclusions This study identified the primary fiber formation period as a critical window.Supplementation with Pro during G20–114 reprogrammed offspring skeletal muscle development through STAT3-CCND1-mediated myoblast proliferation,enhanced mitochondrial bioenergetics,and oxidative fiber specification.However,no such effects were observed during G60–114.These findings propose maternal Pro intervention as a novel strategy to enhance muscle yield and metabolic efficiency in swine production,with potential applications for improving meat quality traits linked to oxidative muscle phenotypes.展开更多
In-situ growing carbon nanotubes （CNTs） directly on carbon fibers （CFs） always lead to a degraded tensile strength of CFs and then a poor fiber-dominated mechanical property of carbon/carbon composites （C/ Cs）. ...In-situ growing carbon nanotubes （CNTs） directly on carbon fibers （CFs） always lead to a degraded tensile strength of CFs and then a poor fiber-dominated mechanical property of carbon/carbon composites （C/ Cs）. To solve this issue, here, a novel carbon fiber-based multiscale reinforcement is reported. To synthesize it, carbon fibers （CFs） have been first grafted by graphene oxide （GO）, and then carbon nanotubes （CNTs） have been in-situ grown on GO-grafted CFs by catalytic chemical vapor deposition. Characterizations on this novel reinforcement show that GO grafting cannot only nondestructively improve the surface chemical activity of CFs but also protect CFs against the high-temperature corrosion of metal catalyst during CNT growth, which maintains their tensile properties. Tensile property tests for unidirectional C/Cs with different preforms show that this novel reinforcement can endow C/C with improved tensile properties, 32% and 87% higher than that of pure C/C and C/C only doped with in-situ grown CNTs. This work would open up a possibility to fabricate multiscale C/Cs with excellent global performance.展开更多
Polyacrylonitrile （PAN） based carbon fibers with different surface morphology were electrochemically treated in 3 wt% NH4HCO3 aqueous solution with current density up to 3.47 A/m 2 at room temperature, and surface s...Polyacrylonitrile （PAN） based carbon fibers with different surface morphology were electrochemically treated in 3 wt% NH4HCO3 aqueous solution with current density up to 3.47 A/m 2 at room temperature, and surface structures, surface morphology and residual mechanical properties were characterized. The crystallite size （La） of carbon fibers would be interrupted due to excessive electrochemical etching, while the crystallite spacing （d（002）） increased as increasing current density. The disordered structures on the surface of carbon fiber with rough surface increased at the initial oxidation stage and then removed by further electrochemical etching, which resulting in continuous increase of the extent of graphitization on the fiber surface. However, the electrochemical etching was beneficial to getting ordered morphology on the surface for carbon fiber with smooth surface, especially when the current density was lower than 1.77 A/m 2 . The tensile strength and tensile modulus could be improved by 17.27% and 5.75%, respectively, and was dependent of surface morphology. The decreasing density of carbon fibers probably resulted from the volume expansion of carbon fibers caused by the abundant oxygen functional groups intercalated between the adjacent graphite layers.展开更多
Niobium oxide nanowire-deposited carbon fiber（CF） samples were prepared using a hydrothermal method with amorphous Nb2O5·nH2O as precursor. The physical properties of the samples were characterized by means of ...Niobium oxide nanowire-deposited carbon fiber（CF） samples were prepared using a hydrothermal method with amorphous Nb2O5·nH2O as precursor. The physical properties of the samples were characterized by means of numerous techniques, including X-ray diffraction（XRD）, energy-dispersive spectroscopy（EDS）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, selected-area electron diffraction（SAED）, UV–visible spectroscopy（UV–vis）, N2 adsorption–desorption, Fourier transform infrared spectroscopy（FT-IR）, and X-ray photoelectron spectroscopy. The efficiency for the removal of Cr（VI） was determined.Parameters such as pH value and initial Cr（VI） concentration could influence the Cr（VI） removal efficiency or adsorption capacity of the Nb2O5/carbon fiber sample obtained after hydrothermal treatment at 160°C for 14 hr. The maximal Cr（VI） adsorption capacity of the Nb2O5 nanowire/CF sample was 115 mg/g. This Nb2O5/CF sample also showed excellent photocatalytic activity and stability for the reduction of Cr（Ⅵ） under UV-light irradiation： the Cr（VI） removal efficiency reached 99.9% after UV-light irradiation for 1 hr and there was no significant decrease in photocatalytic performance after the use of the sample for 10 repeated cycles. Such excellent Cr（VI） adsorption capacity and photocatalytic performance was related to its high surface area,abundant surface hydroxyl groups, and good UV-light absorption ability.展开更多
A mode-locked erbium doped fiber laser（EDFL） is demonstrated using the vanadium oxide（V2O5） material as a saturable absorber（SA）. The V2O5 based SA is hosted into poly ethylene oxide film and attached on fiber f...A mode-locked erbium doped fiber laser（EDFL） is demonstrated using the vanadium oxide（V2O5） material as a saturable absorber（SA）. The V2O5 based SA is hosted into poly ethylene oxide film and attached on fiber ferule in the laser cavity. It shows 7% modulation depth with 71 MW/cm2 saturation intensity. By incorporating the SA inside the EDFL cavity with managed intra-cavity dispersion, ultrashort soliton pulses are successfully generated with a full width at half maximum of 3.14 ps. The laser operated at central wavelength of 1559.25 nm and repetition frequency of 1 MHz.展开更多
We prepared graphene oxide（GO） saturable absorber（SA） successfully through optical deposition method, which is a simple but effective approach to deposit various materials onto substrate under the effects of light...We prepared graphene oxide（GO） saturable absorber（SA） successfully through optical deposition method, which is a simple but effective approach to deposit various materials onto substrate under the effects of light, and investigated several factors that influence the optical deposition result of GO onto optical fiber end, including poly（methyl methacrylate）（PMMA） concentration, light intensity, light mode, and deposition time. The efficient optically deposited GO preserving its nonlinearity guaranteed by GO/PMMA composite formation was also demonstrated. The GO SA prepared by optical deposition shows superior saturable absorption property with modulation depth and nonsaturable loss of 6% and 40%, respectively.展开更多
A mode-locked thulium ytterbium co-doped fiber laser （TYDFL） is proposed and demonstrated by using a commercial graphene oxide （GO） paper as saturable absorber （SA）. The GO paper is sandwiched between two fiber ...A mode-locked thulium ytterbium co-doped fiber laser （TYDFL） is proposed and demonstrated by using a commercial graphene oxide （GO） paper as saturable absorber （SA）. The GO paper is sandwiched between two fiber ferrules and incorporates a ring laser cavity to generate soliton pulse train operating at 1942.0nm at a threshold multimode pump power as low as 1.8 W. The mode-locked TYDFL has a repetition rate of 22.32 MHz and the calculated pulse width of 1.1 ns. Even though the SA has a low damage threshold, the easy fabrication of GO paper should promote its potentiM application in ultrafast photonics.展开更多
Using the reduced graphene oxide（rGO） as a saturable absorber（SA） in an Er-doped fiber（EDF） laser cavity,we obtain the Q-switching operation. The rGO SA is prepared by depositing the GO on fluorine mica（FM） us...Using the reduced graphene oxide（rGO） as a saturable absorber（SA） in an Er-doped fiber（EDF） laser cavity,we obtain the Q-switching operation. The rGO SA is prepared by depositing the GO on fluorine mica（FM） using the thermal reduction method. The modulation depth of rGO/FM is measured to be 3.2%. By incorporating the rGO/FM film into the EDF laser cavity, we obtain stable Q-switched pulses. The shortest pulse duration is3.53 μs, and the maximum single pulse energy is 48.19 nJ. The long-term stability of working is well exhibited.The experimental results show that the rGO possesses potential photonics applications.展开更多
We report on generation of a dual-wavelength, all-fiber, passively Q-switched ytterbium-doped fiber laser using aluminum oxide nanoparticle （Al2O3-NP） thin film. A thin film of Al2O3 was prepared by embedding Al2O3-...We report on generation of a dual-wavelength, all-fiber, passively Q-switched ytterbium-doped fiber laser using aluminum oxide nanoparticle （Al2O3-NP） thin film. A thin film of Al2O3 was prepared by embedding Al2O3-NPs into a polyvinyl alcohol （PVA） as a host polymer, and then inserted between two fiber ferrules to act as a saturable absorber （SA）. By incorporating the Al2O3-PVA SA into the laser cavity, a stable dual-wavelength pulse output centered at 1050 and 1060.7nm is observed at threshold pump power of 80mW. As the pump power is gradually increased from 80 to 300mW, the repetition rate of the generated pulse increases from 16.23 to 59 kHz, while the pulse width decreases from 19 to 6μs. To the best of our knowledge, this is the first demonstration for this type of SA operating in the 1 μm region.展开更多
BACKGROUND: Melatonin is a kind of hormones derived from pineal gland. Recent researches demonstrate that melatonin is characterized by anti-oxidation, anti-senility and destroying free radicals. While, effect and pat...BACKGROUND: Melatonin is a kind of hormones derived from pineal gland. Recent researches demonstrate that melatonin is characterized by anti-oxidation, anti-senility and destroying free radicals. While, effect and pathogenesis of pineal gland on learning ability should be further studied. OBJECTIVE: To investigate the effects of pinealectomy on learning abiliy, distribution of cholinesterase and expression of neuronal nitric oxide synthase (nNOS) in cerebral cortex of rats and probe into the effect of melatonin on learning ability, central cholinergic system and nNOS expression. DESIGN: Randomized grouping design and animal study. SETTING: Department of Neurology, the 187 Hospital of Chinese PLA. MATERIALS: A total of 12 male SD rats, of normal learning ability testing with Y-tape maze, of clean grade, weighing 190-210 g, aged 6 weeks, were selected in this study. METHODS: The experiment was carried out in the Department of Neurology, Zhujiang Hospital from July 1997 to June 2000. All SD rats were divided into experimental group (n =6, pinealectomy) and control group (n =6, sham operation). Seven days later, rats in both two groups were continuously fed for 33 days. ① Learning ability test: The learning ability of rats was tested by trisection Y-type maze and figured as attempting times. ② Expression of acetylcholinesterase (AchE) was detected by enzyme histochemistry and nNOS was measured by SABC method. ③ Quantitative analysis of AchE fibers: AchE fibers density in unit area (surface density) was surveyed with Leica Diaplan microscope and Leica Quantimet 500+ image analytic apparatus and quantitative parameter was set up for AchE fibers covering density (μm2) per 374 693.656 μm2, moreover, the AchE fibers density was measured in Ⅱ-Ⅳ layers of motor and somatosensory cortex (showing three layers per field of vision at one time), in radiative, lacunaria and molecular layers of CA1, CA2 and CA3 areas, and in lamina multiforms of dentate gyrus. Three tissue slices were picked up randomly in the same part of each rat, together six tissue slices for nNOS expression and four near view (× 400) were selected in the parts of right neocortex, medial septal nucleus-diagonal band nucleus (SM-DB), corpus striatus and hippocampus to count nNOS-positive cells. MAIN OUTCOME MEASURES: Learning ability; distribution and quantitative analysis of AchE fibers; expression of nNOS in various cerebral areas. RESULTS: The twelve rats were all involved in the final analysis. ① Learning ability test: The learning abilities before operation in the experimental group [(14.67±4.97) times] were consistent with those in the control group [(14.33±4.32) times, P > 0.05], the learning abilities in the experimental group at 40 days after pinealectomy [(28.67±2.42) times] were obviously more than those before pinealectomy and those in the control group after operation [(13.83±8.33) times, P < 0.01]. ② Results of AchE-positive fibers density in cerebral cortex of rats: The AChE-positive fibers densities in motor and somatosensory cortex, CA1, CA2 and CA3 areas of hippocampus and in lamina multiforms of dentate gyrus in the experimental group were obviously lower than those in the control group [experimental group: (15 244±1 339), (14 764±1 391), (12 991±970), (15 077±1 020), (19 546±1 489), (19 337±1 378) μm2; control group: (21 001±1 021), (17 930±2 225), (17 260±1 342), (18 911±1 048), (24 108±1 671), (22 917±1 909) μm2, P < 0.01]. ③ Expression of nNOS in various cerebral areas: nNOS-positive cells in cerebral cortex of rats of the experimental group were more, furthermore the ones in somatosensory cortex were slightly more in motor cortex and the number (5.90±0.68) was more than that in the control group (3.68±0.39,P < 0.05). The nNOS-positive cells in SM-DB (16.21±2.03) were markedly more than those in the control group (9.32±1.05,P < 0.01). The nNOS-positive cells in hippocampus (4.27±0.75) and in corpus striatus (9.35±2.58) were not different with those in the control group (3.94±0.53, 8.96±2.31, P > 0.05). CONCLUSION: Decrease of melatonin due to pinealectomy of rats can result in learning disorder, which may be related to trauma of cholinergic neuron in cerebral cortex which were caused by nitric oxide neurotoxicity arose from the overexpression of nNOS in cerebral neocortex and SM-DB.展开更多
A lab-scale integrated treatment system including the novel sequence bio-ecological process （SBEP） and biological aerated filter （BAF） for a sewage mixture （chemistry laboratory wastewater and domestic sewage） w...A lab-scale integrated treatment system including the novel sequence bio-ecological process （SBEP） and biological aerated filter （BAF） for a sewage mixture （chemistry laboratory wastewater and domestic sewage） was presented in this paper. The main objective of the study was to test the contribution of artificial aeration, recir-culation ratio and mass concentration of steel slag on pollutant removal in winter when the plants are dormant. It had been shown that SBEP and BAF play different roles in removing contaminants from wastewater. During the airflow experiment, the removal efficiency of COD and TP in SBEP was higher than that in BAF, whereas BAF can compensate for the deficiency of SBEP where no significant improvement on ammonium nitrogen removal is ob-served. Yet, the removal etticiencies of COD,TP and NH4^＋ -N in SBEP could be improved apparently when ditterent recireulation ratio or various mass concentration of steel were applied. Especially, when the airflow of 0.06 L·h^-1, the recirculation ratio rate of 80% and the mass concentration of steel of 2.2-2.4 g·L^-1 were applied, thehighest efficiency of 94.6%, 77.9% and 80.7% for COD, TP and NH4^＋ -N were achieved,-respectively,The integrated treatment system of SBEP and BAF was proved to be an effective wastewater treatment technique and a better alternative to treat domestic sewage.展开更多
Graphene oxide （GO）-multiwalled carbon nanotube （MWCNT） composite was synthesized and characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, micro Raman, Fourier transform infra...Graphene oxide （GO）-multiwalled carbon nanotube （MWCNT） composite was synthesized and characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, micro Raman, Fourier transform infrared and ultraviolet-visible near infrared spectroscopy techniques. Spectral characteris- tics of cladding modified fiber optic gas sensors were studied for various concentrations of ammonia, ethanol and methanol at 27 ℃. Thickness of the gas sensing layer was controlled by varying the concentration of composite in ethanol medium （0.5 and 1 mg/mL） for three times dipping process. The O.S mg/ mL concentrated GO-MWCNT coated sensor showed 1.20, 1.40 and 1.15 times higher sensitivity than the GO coated sensor for ammonia, ethanol and methanol vapors, respectively. Furthermore, it exhibited 1.50, 1.80 and 1.80 times better sensitivity than 1 mg/mL concentrated GO-MWCNT coated sensor for ammonia, ethanol and methanol vapors, respectively. The presence of functional groups in GO increased the sen- sitivity. This is mainly attributed to the effective electron charge transfer between the composite materials and analytes.展开更多
We demonstrate a femtosecond mode-locked erbium-doped fiber laser（EDFL） using a nickel oxide（Ni O） as a saturable absorber（SA）. Ni O nanoparticles are hosted into polyethylene oxide film and attached to fiber fe...We demonstrate a femtosecond mode-locked erbium-doped fiber laser（EDFL） using a nickel oxide（Ni O） as a saturable absorber（SA）. Ni O nanoparticles are hosted into polyethylene oxide film and attached to fiber ferrule in the laser cavity. The Ni O-SA shows a 39% modulation depth with a 0.04 MW∕cm^2 saturation intensity. Our ring laser cavity based on erbium-doped active fiber with managed intracavity dispersion has the ability to generate ultrashort pulses with a full width at half-maximum（FWHM） of around 2.85 nm centered at 1561.8 nm.The pulses repeat at a frequency of 0.96 MHz and duration of 950 fs.展开更多
基金supported by the National Natural Science Foundation of China(32272895 and 32172744).
文摘Background While maternal proline(Pro)supplementation has demonstrated efficacy in enhancing placental angiogenesis and farrowing efficiency in swine,its regulatory role in fetal skeletal muscle ontogeny remains undefined.This study systematically evaluated the temporal-specific impacts of dietary Pro supplementation during critical phases of fetal myogenesis(encompassing primary myofiber formation and secondary myofiber hyperplasia)on offspring muscle development.A total of 120 sows with similar farrowing schedules were assigned to three groups:CON(basal diet),ST-Pro(0.5%Pro supplementation during secondary myofiber formation period,from d 60 gestation to farrowing),LT-Pro(0.5%Pro supplementation spanning primary and secondary myofiber formation period:from d 20 gestation to farrowing).Results LT-Pro group significantly increased the longissimus dorsi(LD)muscle mass per unit body weight in newborn piglets compared to CON group(P<0.05),while no such effect was observed in the ST-Pro group.Metabolomic profiling revealed elevated Pro,lysine,and tryptophan levels in the LD muscle of LT-Pro group piglets,accompanied by reduced branched-chain amino acids(BCAAs;leucine,isoleucine,and valine)in both serum and muscle(P<0.05).Histological analysis demonstrated a 45.74%increase in myofiber cross-sectional area in the LT-Pro group(P<0.05).At the molecular level,LT-Pro group piglets exhibited upregulated mRNA expression levels of myogenic regulatory genes(MYOD1,MYF6)and the cell cycle accelerator CCND1(P<0.05),coupled with activation of the STAT3 signaling pathway(phosphorylated STAT3 protein increased by 2.53-fold,P<0.01).Furthermore,Pro supplementation enhanced oxidative metabolism,evidenced by elevated mitochondrial biogenesis markers(the mRNA expression levels of PPARGC1A,OPA1,and SQSTM1)and a 61.58%increase in succinate dehydrogenase activity(P<0.05).Notably,LT-Pro group piglets showed a selective shift toward slow-twitch oxidative fibers,with both MyHC1 mRNA and protein expression levels significantly upregulated(P<0.05),while the mRNA expression levels of MyHCIIb showed no significant change.Conclusions This study identified the primary fiber formation period as a critical window.Supplementation with Pro during G20–114 reprogrammed offspring skeletal muscle development through STAT3-CCND1-mediated myoblast proliferation,enhanced mitochondrial bioenergetics,and oxidative fiber specification.However,no such effects were observed during G60–114.These findings propose maternal Pro intervention as a novel strategy to enhance muscle yield and metabolic efficiency in swine production,with potential applications for improving meat quality traits linked to oxidative muscle phenotypes.
基金supported by the National Natural Science Foundation of China (Nos.51432008,51502242,U1435202,and 51202194)the Research Fund for the Doctoral Program of Higher Education of China (No.20126102110013)the Key Grant Project of Chinese Ministry of Education (No.313047)
文摘In-situ growing carbon nanotubes （CNTs） directly on carbon fibers （CFs） always lead to a degraded tensile strength of CFs and then a poor fiber-dominated mechanical property of carbon/carbon composites （C/ Cs）. To solve this issue, here, a novel carbon fiber-based multiscale reinforcement is reported. To synthesize it, carbon fibers （CFs） have been first grafted by graphene oxide （GO）, and then carbon nanotubes （CNTs） have been in-situ grown on GO-grafted CFs by catalytic chemical vapor deposition. Characterizations on this novel reinforcement show that GO grafting cannot only nondestructively improve the surface chemical activity of CFs but also protect CFs against the high-temperature corrosion of metal catalyst during CNT growth, which maintains their tensile properties. Tensile property tests for unidirectional C/Cs with different preforms show that this novel reinforcement can endow C/C with improved tensile properties, 32% and 87% higher than that of pure C/C and C/C only doped with in-situ grown CNTs. This work would open up a possibility to fabricate multiscale C/Cs with excellent global performance.
基金supported by the National Basic Research Program of China (No. 2011CB605602)
文摘Polyacrylonitrile （PAN） based carbon fibers with different surface morphology were electrochemically treated in 3 wt% NH4HCO3 aqueous solution with current density up to 3.47 A/m 2 at room temperature, and surface structures, surface morphology and residual mechanical properties were characterized. The crystallite size （La） of carbon fibers would be interrupted due to excessive electrochemical etching, while the crystallite spacing （d（002）） increased as increasing current density. The disordered structures on the surface of carbon fiber with rough surface increased at the initial oxidation stage and then removed by further electrochemical etching, which resulting in continuous increase of the extent of graphitization on the fiber surface. However, the electrochemical etching was beneficial to getting ordered morphology on the surface for carbon fiber with smooth surface, especially when the current density was lower than 1.77 A/m 2 . The tensile strength and tensile modulus could be improved by 17.27% and 5.75%, respectively, and was dependent of surface morphology. The decreasing density of carbon fibers probably resulted from the volume expansion of carbon fibers caused by the abundant oxygen functional groups intercalated between the adjacent graphite layers.
基金financially supported by the major Project of the national science and technology of China (No. SQ2017YFGX010248)the Beijing Natural Science Foundation (No. 2172011)
文摘Niobium oxide nanowire-deposited carbon fiber（CF） samples were prepared using a hydrothermal method with amorphous Nb2O5·nH2O as precursor. The physical properties of the samples were characterized by means of numerous techniques, including X-ray diffraction（XRD）, energy-dispersive spectroscopy（EDS）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, selected-area electron diffraction（SAED）, UV–visible spectroscopy（UV–vis）, N2 adsorption–desorption, Fourier transform infrared spectroscopy（FT-IR）, and X-ray photoelectron spectroscopy. The efficiency for the removal of Cr（VI） was determined.Parameters such as pH value and initial Cr（VI） concentration could influence the Cr（VI） removal efficiency or adsorption capacity of the Nb2O5/carbon fiber sample obtained after hydrothermal treatment at 160°C for 14 hr. The maximal Cr（VI） adsorption capacity of the Nb2O5 nanowire/CF sample was 115 mg/g. This Nb2O5/CF sample also showed excellent photocatalytic activity and stability for the reduction of Cr（Ⅵ） under UV-light irradiation： the Cr（VI） removal efficiency reached 99.9% after UV-light irradiation for 1 hr and there was no significant decrease in photocatalytic performance after the use of the sample for 10 repeated cycles. Such excellent Cr（VI） adsorption capacity and photocatalytic performance was related to its high surface area,abundant surface hydroxyl groups, and good UV-light absorption ability.
文摘A mode-locked erbium doped fiber laser（EDFL） is demonstrated using the vanadium oxide（V2O5） material as a saturable absorber（SA）. The V2O5 based SA is hosted into poly ethylene oxide film and attached on fiber ferule in the laser cavity. It shows 7% modulation depth with 71 MW/cm2 saturation intensity. By incorporating the SA inside the EDFL cavity with managed intra-cavity dispersion, ultrashort soliton pulses are successfully generated with a full width at half maximum of 3.14 ps. The laser operated at central wavelength of 1559.25 nm and repetition frequency of 1 MHz.
基金Funded by the National Natural Science Foundation of China(Nos.61575150 and 61377092)the Fundamental Research Funds for the Central Universities(WUT:2017II46GX)
文摘We prepared graphene oxide（GO） saturable absorber（SA） successfully through optical deposition method, which is a simple but effective approach to deposit various materials onto substrate under the effects of light, and investigated several factors that influence the optical deposition result of GO onto optical fiber end, including poly（methyl methacrylate）（PMMA） concentration, light intensity, light mode, and deposition time. The efficient optically deposited GO preserving its nonlinearity guaranteed by GO/PMMA composite formation was also demonstrated. The GO SA prepared by optical deposition shows superior saturable absorption property with modulation depth and nonsaturable loss of 6% and 40%, respectively.
基金Supported by the Ministry of Education and University of Malaya under Grant Nos SF014-2014,PG139-2012 B and PG068-2013B
文摘A mode-locked thulium ytterbium co-doped fiber laser （TYDFL） is proposed and demonstrated by using a commercial graphene oxide （GO） paper as saturable absorber （SA）. The GO paper is sandwiched between two fiber ferrules and incorporates a ring laser cavity to generate soliton pulse train operating at 1942.0nm at a threshold multimode pump power as low as 1.8 W. The mode-locked TYDFL has a repetition rate of 22.32 MHz and the calculated pulse width of 1.1 ns. Even though the SA has a low damage threshold, the easy fabrication of GO paper should promote its potentiM application in ultrafast photonics.
基金Supported by the National Natural Science Foundation of China under Grant No 61705183the Central University Special Fund Basic Research and Operating Expenses under Grant No GK201702005+1 种基金the Natural Science Foundation of Shaanxi Province under Grant No 2017JM6091the Fundamental Research Funds for the Central Universities under Grant No 2017TS011
文摘Using the reduced graphene oxide（rGO） as a saturable absorber（SA） in an Er-doped fiber（EDF） laser cavity,we obtain the Q-switching operation. The rGO SA is prepared by depositing the GO on fluorine mica（FM） using the thermal reduction method. The modulation depth of rGO/FM is measured to be 3.2%. By incorporating the rGO/FM film into the EDF laser cavity, we obtain stable Q-switched pulses. The shortest pulse duration is3.53 μs, and the maximum single pulse energy is 48.19 nJ. The long-term stability of working is well exhibited.The experimental results show that the rGO possesses potential photonics applications.
基金Supported by the Iraqi Ministry of Higher Education and Scientific Research and University of Baghdad
文摘We report on generation of a dual-wavelength, all-fiber, passively Q-switched ytterbium-doped fiber laser using aluminum oxide nanoparticle （Al2O3-NP） thin film. A thin film of Al2O3 was prepared by embedding Al2O3-NPs into a polyvinyl alcohol （PVA） as a host polymer, and then inserted between two fiber ferrules to act as a saturable absorber （SA）. By incorporating the Al2O3-PVA SA into the laser cavity, a stable dual-wavelength pulse output centered at 1050 and 1060.7nm is observed at threshold pump power of 80mW. As the pump power is gradually increased from 80 to 300mW, the repetition rate of the generated pulse increases from 16.23 to 59 kHz, while the pulse width decreases from 19 to 6μs. To the best of our knowledge, this is the first demonstration for this type of SA operating in the 1 μm region.
文摘BACKGROUND: Melatonin is a kind of hormones derived from pineal gland. Recent researches demonstrate that melatonin is characterized by anti-oxidation, anti-senility and destroying free radicals. While, effect and pathogenesis of pineal gland on learning ability should be further studied. OBJECTIVE: To investigate the effects of pinealectomy on learning abiliy, distribution of cholinesterase and expression of neuronal nitric oxide synthase (nNOS) in cerebral cortex of rats and probe into the effect of melatonin on learning ability, central cholinergic system and nNOS expression. DESIGN: Randomized grouping design and animal study. SETTING: Department of Neurology, the 187 Hospital of Chinese PLA. MATERIALS: A total of 12 male SD rats, of normal learning ability testing with Y-tape maze, of clean grade, weighing 190-210 g, aged 6 weeks, were selected in this study. METHODS: The experiment was carried out in the Department of Neurology, Zhujiang Hospital from July 1997 to June 2000. All SD rats were divided into experimental group (n =6, pinealectomy) and control group (n =6, sham operation). Seven days later, rats in both two groups were continuously fed for 33 days. ① Learning ability test: The learning ability of rats was tested by trisection Y-type maze and figured as attempting times. ② Expression of acetylcholinesterase (AchE) was detected by enzyme histochemistry and nNOS was measured by SABC method. ③ Quantitative analysis of AchE fibers: AchE fibers density in unit area (surface density) was surveyed with Leica Diaplan microscope and Leica Quantimet 500+ image analytic apparatus and quantitative parameter was set up for AchE fibers covering density (μm2) per 374 693.656 μm2, moreover, the AchE fibers density was measured in Ⅱ-Ⅳ layers of motor and somatosensory cortex (showing three layers per field of vision at one time), in radiative, lacunaria and molecular layers of CA1, CA2 and CA3 areas, and in lamina multiforms of dentate gyrus. Three tissue slices were picked up randomly in the same part of each rat, together six tissue slices for nNOS expression and four near view (× 400) were selected in the parts of right neocortex, medial septal nucleus-diagonal band nucleus (SM-DB), corpus striatus and hippocampus to count nNOS-positive cells. MAIN OUTCOME MEASURES: Learning ability; distribution and quantitative analysis of AchE fibers; expression of nNOS in various cerebral areas. RESULTS: The twelve rats were all involved in the final analysis. ① Learning ability test: The learning abilities before operation in the experimental group [(14.67±4.97) times] were consistent with those in the control group [(14.33±4.32) times, P > 0.05], the learning abilities in the experimental group at 40 days after pinealectomy [(28.67±2.42) times] were obviously more than those before pinealectomy and those in the control group after operation [(13.83±8.33) times, P < 0.01]. ② Results of AchE-positive fibers density in cerebral cortex of rats: The AChE-positive fibers densities in motor and somatosensory cortex, CA1, CA2 and CA3 areas of hippocampus and in lamina multiforms of dentate gyrus in the experimental group were obviously lower than those in the control group [experimental group: (15 244±1 339), (14 764±1 391), (12 991±970), (15 077±1 020), (19 546±1 489), (19 337±1 378) μm2; control group: (21 001±1 021), (17 930±2 225), (17 260±1 342), (18 911±1 048), (24 108±1 671), (22 917±1 909) μm2, P < 0.01]. ③ Expression of nNOS in various cerebral areas: nNOS-positive cells in cerebral cortex of rats of the experimental group were more, furthermore the ones in somatosensory cortex were slightly more in motor cortex and the number (5.90±0.68) was more than that in the control group (3.68±0.39,P < 0.05). The nNOS-positive cells in SM-DB (16.21±2.03) were markedly more than those in the control group (9.32±1.05,P < 0.01). The nNOS-positive cells in hippocampus (4.27±0.75) and in corpus striatus (9.35±2.58) were not different with those in the control group (3.94±0.53, 8.96±2.31, P > 0.05). CONCLUSION: Decrease of melatonin due to pinealectomy of rats can result in learning disorder, which may be related to trauma of cholinergic neuron in cerebral cortex which were caused by nitric oxide neurotoxicity arose from the overexpression of nNOS in cerebral neocortex and SM-DB.
基金Supported by the Important National Science & Technology Specific Projects (2009ZX07526-005-05)
文摘A lab-scale integrated treatment system including the novel sequence bio-ecological process （SBEP） and biological aerated filter （BAF） for a sewage mixture （chemistry laboratory wastewater and domestic sewage） was presented in this paper. The main objective of the study was to test the contribution of artificial aeration, recir-culation ratio and mass concentration of steel slag on pollutant removal in winter when the plants are dormant. It had been shown that SBEP and BAF play different roles in removing contaminants from wastewater. During the airflow experiment, the removal efficiency of COD and TP in SBEP was higher than that in BAF, whereas BAF can compensate for the deficiency of SBEP where no significant improvement on ammonium nitrogen removal is ob-served. Yet, the removal etticiencies of COD,TP and NH4^＋ -N in SBEP could be improved apparently when ditterent recireulation ratio or various mass concentration of steel were applied. Especially, when the airflow of 0.06 L·h^-1, the recirculation ratio rate of 80% and the mass concentration of steel of 2.2-2.4 g·L^-1 were applied, thehighest efficiency of 94.6%, 77.9% and 80.7% for COD, TP and NH4^＋ -N were achieved,-respectively,The integrated treatment system of SBEP and BAF was proved to be an effective wastewater treatment technique and a better alternative to treat domestic sewage.
文摘Graphene oxide （GO）-multiwalled carbon nanotube （MWCNT） composite was synthesized and characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, micro Raman, Fourier transform infrared and ultraviolet-visible near infrared spectroscopy techniques. Spectral characteris- tics of cladding modified fiber optic gas sensors were studied for various concentrations of ammonia, ethanol and methanol at 27 ℃. Thickness of the gas sensing layer was controlled by varying the concentration of composite in ethanol medium （0.5 and 1 mg/mL） for three times dipping process. The O.S mg/ mL concentrated GO-MWCNT coated sensor showed 1.20, 1.40 and 1.15 times higher sensitivity than the GO coated sensor for ammonia, ethanol and methanol vapors, respectively. Furthermore, it exhibited 1.50, 1.80 and 1.80 times better sensitivity than 1 mg/mL concentrated GO-MWCNT coated sensor for ammonia, ethanol and methanol vapors, respectively. The presence of functional groups in GO increased the sen- sitivity. This is mainly attributed to the effective electron charge transfer between the composite materials and analytes.
文摘We demonstrate a femtosecond mode-locked erbium-doped fiber laser（EDFL） using a nickel oxide（Ni O） as a saturable absorber（SA）. Ni O nanoparticles are hosted into polyethylene oxide film and attached to fiber ferrule in the laser cavity. The Ni O-SA shows a 39% modulation depth with a 0.04 MW∕cm^2 saturation intensity. Our ring laser cavity based on erbium-doped active fiber with managed intracavity dispersion has the ability to generate ultrashort pulses with a full width at half-maximum（FWHM） of around 2.85 nm centered at 1561.8 nm.The pulses repeat at a frequency of 0.96 MHz and duration of 950 fs.
