According to the chemical and mineral composition characteristics of the fly ash,alumina can be extracted from fly ash through the calcining method by using sodium carbonate and calcium carbonate additives.The effects...According to the chemical and mineral composition characteristics of the fly ash,alumina can be extracted from fly ash through the calcining method by using sodium carbonate and calcium carbonate additives.The effects on leaching rate of alumina have been investigated. The results showed that the fly ash can be activated effectively and the leaching rate of alumina can be improved to more than 92% through this method. The best process parameters were the ratio of raw materials,i. e. the material weight ratio of fly ash,calcium carbonate and sodium carbonate was 1. 0∶1. 2∶0. 9. The activating temperature was 850℃-900℃,activating time was 3 h. This process has a potential application prospect and improves the value of comprehensive utilization of fly ash.展开更多
For nonlinear stability problems of discretized conservative systems with multiple parameter variables and multiple state variables, the activation method is put forward, by which activated potential functions and act...For nonlinear stability problems of discretized conservative systems with multiple parameter variables and multiple state variables, the activation method is put forward, by which activated potential functions and activated equilibrium equations are derived. The activation method is the improvement and enhancement of Liapunov-Schmidt method in elastic stability theory. It is more generalized and more normalized than conventional perturbation methods. The activated potential functions may be transformed into normalized catastrophe potential functions. The activated equilibrium equations may be treated as bifurcation equations. The researches in this paper will motivate the combination of elastic stability theory with catastrophe theory and bifurcation theory展开更多
Proton exchange membrane fuel cells(PEMFCs)have been widely acknowledged as a significant advancement in achieving sustainable energy conversion.However,the activation of newly established Pt-ionomer interfaces in the...Proton exchange membrane fuel cells(PEMFCs)have been widely acknowledged as a significant advancement in achieving sustainable energy conversion.However,the activation of newly established Pt-ionomer interfaces in the catalyst layer of PEMFCs can be a time-consuming and costly process to ensure proper coupling and performance.In order to gain valuable insights into this crucial activation process,we have conducted a comprehensive analysis and comparison of the commonly employed on-line(such as current or voltage control activation,short-circuiting activation,and air interruption activation)and off-line(including boiling or steaming,acidtreatment,and ultrasonic-treatment)activation methods.Our findings shed light on the underlying mechanisms that contribute to enhanced performance within the catalyst layer,such as the reduction of Pt oxides and hydroxides,improved proton transport,and the reduction of“dead”regions.Moreover,this review emphasizes the significant challenges and future opportunities that lie in further enhancing the performance within the catalyst layer through the activation process.展开更多
The ^232Th（n,γ）^233Th neutron capture reaction cross sections were measured at average neutron energies of 14.1 MeV and 14.8 MeV using the activation method.The neutron flux was determined using the monitor reactio...The ^232Th（n,γ）^233Th neutron capture reaction cross sections were measured at average neutron energies of 14.1 MeV and 14.8 MeV using the activation method.The neutron flux was determined using the monitor reaction^27Al（n,α）^24Na.The induced gamma-ray activities were measured using a low background gamma ray spectrometer equipped with a high resolution HPGe detector.The experimentally determined cross sections were compared with the data in the literature,and the evaluated data of ENDF/B-Ⅶ.1,JENDL-4.0u＋,and CENDL-3.1.The excitation functions of the ^232Th（n,γ）^233Th reaction were also calculated theoretically using the TALYS1.6 computer code.展开更多
The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according...The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according to certain rules along the time axis. The synthesized command can suppress the arbitrary unwanted vibration harmonic while achieving the desired rigid body motion. The number of the components increases rapidly when the number of harmonic vibration is growing. In this article, the CSVS based on zero-placement technique is used to construct the synthesized command to suppress the multi-harmonics simultaneously in the discrete domain. The nature of zero-placement method is to put enough zeros to cancel system poles at necessary points. The designed synthesized command has equal time intervals between each component and which is much easier to be implemented. Using this method, the number of components increases linearly with the increasing of the number of being suppressed harmonics. For the spacecraft with flexible appendages, CSVS based on zero-placement is used to design the time optimal large angle maneuver control strategy. Simulations have verified the validity and superiority of the proposed approach.展开更多
[Objective] This paper aims to study a new method of extracting pumpkin polysaccharide from pumpkin. Single factor experiments were conducted to examine the effects of extracting time,temperature,the solid-liquid rati...[Objective] This paper aims to study a new method of extracting pumpkin polysaccharide from pumpkin. Single factor experiments were conducted to examine the effects of extracting time,temperature,the solid-liquid ratio and pH value on the extraction yield of polysaccharide from pumpkin. [Method] The best enzyme ratio and extraction conditions for complex enzymes extraction were determined through orthogonal tests. Scavenging ·OH and O-2 activities of pumpkin polysaccharides were also investigated by salicylic acid and improved self-oxidation of o-pheno methods respectively. [Results] The results showed that the biggest extraction yield of polysaccharide from pumpkin can be got when adding 1% cellulose enzyme,1.5% pectinase,1.0% papain and Na2HPO4-citric acid buffer solution (pH was 4.6),and oscillating for 30 min under water at 40 ℃ with the solid-liquid ratio of 1:30. In addition,pumpkin polysaccharides had a strong activity of eliminating ·OH,but very weak activity to scavenge O-2. [Conclusion] This study provided basic data for research and application of Pumpkin polysaccharide.展开更多
Cyber-physical systems(CPSs)are regarded as the backbone of the fourth industrial revolution,in which communication,physical processes,and computer technology are integrated.In modern industrial systems,CPSs are widel...Cyber-physical systems(CPSs)are regarded as the backbone of the fourth industrial revolution,in which communication,physical processes,and computer technology are integrated.In modern industrial systems,CPSs are widely utilized across various domains,such as smart grids,smart healthcare systems,smart vehicles,and smart manufacturing,among others.Due to their unique spatial distribution,CPSs are highly vulnerable to cyber-attacks,which may result in severe performance degradation and even system instability.Consequently,the security concerns of CPSs have attracted significant attention in recent years.In this paper,a comprehensive survey on the security issues of CPSs under cyber-attacks is provided.Firstly,mathematical descriptions of various types of cyberattacks are introduced in detail.Secondly,two types of secure estimation and control processing schemes,including robust methods and active methods,are reviewed.Thirdly,research findings related to secure control and estimation problems for different types of CPSs are summarized.Finally,the survey is concluded by outlining the challenges and suggesting potential research directions for the future.展开更多
Vertebrobasilar dolichoectasia(VBD),a rare posterior circulation vascular variant disease,is an important risk factor for many acute cerebrovascular diseases.An insufficient understanding of VBD often leads to misdiag...Vertebrobasilar dolichoectasia(VBD),a rare posterior circulation vascular variant disease,is an important risk factor for many acute cerebrovascular diseases.An insufficient understanding of VBD often leads to misdiagnose.Two cases of VBD that were initially diagnosed as posterior circulation watershed infarction are reported here.Absence of common causes of stroke including hypoperfusion,blood system diseases,carotid and aortic dissection,and eosinophil elevation,the symptoms of the 2 patients met the diagnostic criteria of VBD.Both patients displayed symptoms that were in line with the Traditional Chinese Medicine(TCM)syndrome pattern of"Qi deficiency and blood stasis".Accordingly,they were comprehensively treated with Supplementing Qi and activating blood circulation method.The clinical manifestations of the 2 patients were remarkably improved and no recurrence of watershed infarction was found in a 1-year follow-up.A detailed medical history and laboratory examination are capable of improving diagnostic accuracy of VBD.TCM treatment based on syndrome identification might be a promising candidate for VBD management.展开更多
Stabilizing pile is a kind of earth shoring structure frequently used in slope engineering. When the piles have cantilever segments above the ground,laggings are usually installed to avoid collapse of soil between pil...Stabilizing pile is a kind of earth shoring structure frequently used in slope engineering. When the piles have cantilever segments above the ground,laggings are usually installed to avoid collapse of soil between piles. Evaluating the earth pressure acting on laggings is of great importance in design process.Since laggings are usually less stiff than piles,the lateral pressure on lagging is much closer to active earth pressure. In order to estimate the lateral earth pressure on lagging more accurately,first,a model test of cantilever stabilizing pile and lagging systems was carried out. Then,basing the experimental results a three-dimensional sliding wedge model was established. Last,the calculation process of the total active force on lagging is presented based on the kinematic approach of limit analysis. A comparison is made between the total active force on lagging calculated by the formula presented in this study and the force on a same-size rigid retaining wall obtained from Rankine's theory. It is found that the proposed method fits well with the experimental results.Parametric studies show that the total active force on lagging increases with the growth of the lagging height and the lagging clear span; while decreases asthe soil internal friction angle and soil cohesion increase.展开更多
In order to monitor the basic mechanical properties and interior damage of concrete structures,the piezoelectric actuator/sensor based wave propagation method was investigated experimentally in the laboratory using a ...In order to monitor the basic mechanical properties and interior damage of concrete structures,the piezoelectric actuator/sensor based wave propagation method was investigated experimentally in the laboratory using a specifically designed test setup.The energy attenuation of stress waves was measured by the relative index between the output voltage of sensors and the excitation voltage at the actuator.Based on the experimental results of concrete cube and cylinder specimens,the effect of excitation frequencies,excitation amplitude,wave propagation paths and the curing age on the output signals of sensors are evaluated.The results show that the relative voltage attenuation coefficient RVAC is an effective indicator for measuring the attenuation of stress waves through the interior of concrete.展开更多
Oxygen transfer presents a serious challenge in the application of liquid lead as a nuclear coolant in advanced reactors. To mitigate corrosion by liquid lead in contact with steel, carefully controlling the oxygen co...Oxygen transfer presents a serious challenge in the application of liquid lead as a nuclear coolant in advanced reactors. To mitigate corrosion by liquid lead in contact with steel, carefully controlling the oxygen concentration has been used as an effective way. Oxygen needs to mix in liquid lead uniformly and quickly. To enhance oxygen transport in liquid lead, nanoparticles are added to the liquid metal. In the current study, a lattice Boltzmann method is applied to investigate natural convection of copper/lead and aluminum oxide/lead in two-dimensional simplified container. Two thermal boundary cases are evaluated in order to check the effect of different natural convection flow patterns on oxygen transport. Some useful information are obtained such as improvement in natural convection and reduction in oxygen equilibrium time.展开更多
This paper aims to establish a comparison between both geomagnetic activity classification methods on foF2 diurnal variation over solar cycle phases. It concerns first a comparison of geomagnetic activity occurrences ...This paper aims to establish a comparison between both geomagnetic activity classification methods on foF2 diurnal variation over solar cycle phases. It concerns first a comparison of geomagnetic activity occurrences according to both classification methods;and second the geomagnetic effect on foF2 diurnal variation profiles as defined for the equatorial latitudes. The occurrences of the different disturbed geomagnetic activities (recurrent activity (RA), shock activity (SA) and fluctuant activity (FA)) according to both classifications (ancient classification (AC) and new classification (NC)) have been studied at Dakar ionosonde station (Lat: 14.8°N;Long: 342.6°E). Regarding both classifications, the RA occurs more during the decreasing phase. And it’s observed that the RA occurs the most during the increasing phase for the AC and during the minimum phase for the NC. The maximum gap of occurrence (<img src="Edit_e4627ea9-9a9a-4473-9017-202d04a16377.bmp" alt="" /><span><span style="font-family:Verdana;">) between both classifications is <span style="font-size:10.0pt;font-family:;" "=""><span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">-</span></span></span><span style="font-family:;" "=""><span style="font-family:Verdana;">11.1%</span><span style="font-family:Verdana;"> (for the negative value which is observed during the increasing phase) and </span><span style="font-family:Verdana;">+16.74%</span><span style="font-family:Verdana;"> (for the positive one which is observed during the decreasing phase). The occurrence of the SA in relation with both classifications is the lowest during the minimum phase and the maximum occurrence is observed during the maximum and decreasing phases, for the AC, with a value close to </span><span style="font-family:Verdana;">37%</span><span style="font-family:Verdana;"> and for the NC at the maximum phase with a percentage of </span><span style="font-family:Verdana;">54.47%</span><span><span style="font-family:Verdana;">. The maximum gap of occurrence (</span><img src="Edit_20fa141b-ecee-4e06-8024-144ba0969395.bmp" alt="" /></span></span><span style="font-family:Verdana;">) between both classifications is <span style="font-size:10.0pt;font-family:;" "=""><span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">-</span></span></span><span style="font-family:;" "=""><span style="font-family:Verdana;">17.85%</span><span style="font-family:Verdana;"> (for the negative value which is observed at maximum phase) and </span><span style="font-family:Verdana;">+13.53%</span><span style="font-family:Verdana;"> (for the positive one which is observed during the decreasing phase). For both classifications, the FA occurs the least during the minimum phase and the most during the maximum phase for the AC and at maximum and decreasing phases with percentage values of occurrence of roughly </span><span style="font-family:Verdana;">37%</span><span><span style="font-family:Verdana;"> for the NC. The maximum gap of occurrence (</span><img src="Edit_eecb8939-783e-4d43-b92c-80c528c1890b.bmp" alt="" /><span style="font-family:Verdana;"></span></span></span><span style="font-family:Verdana;">) between both classifications is <span style="font-size:10.0pt;font-family:;" "=""><span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">-</span></span>10% (for the negative value which is observed during the decreasing phase) and </span><span style="font-family:;" "=""><span style="font-family:Verdana;">+20.11%</span><span style="font-family:Verdana;"> (for the positive one which is observed during the maximum phase). foF2 diurnal profiles throughout solar cycle phases concerning the AC and the NC have been compared. The FA diurnal profiles don’t present a difference. The RA and the SA present a difference during minimum and increasing phases and the least at maximum and decreasing phases.</span></span></span>展开更多
Prompt gamma neutron activation analysis (PGNAA) is a non-destructive online measurement nuclear analysis method. With its unique advantages, it has been widely used in online analysis of industrial materials such as ...Prompt gamma neutron activation analysis (PGNAA) is a non-destructive online measurement nuclear analysis method. With its unique advantages, it has been widely used in online analysis of industrial materials such as coal, cement, and minerals in recent years. </span><span style="font-family:Verdana;">However, there are many kinds of literature on PGNAA in the field of industrial materials detection, and there are still a few concluding articles. To this end,</span><span style="font-family:Verdana;"> based on the principle of PGNAA online analysis, the status quo and development of the real-time online detection of industrial material components in the field are reviewed and discussed by consulting a large number of domestic and foreign PGNAA related literature and data, to facilitate the reference of relevant scientific researchers.展开更多
Titania（TiO2） nanorod powder was prepared by nonhydrolytic sol-gel method using titanic chloride（TiCl4） as titanium source, methylene dichloride（CH2Cl2） as solvent, absolute ethyl alcohol（CH（-3）CH2OH） as oxy...Titania（TiO2） nanorod powder was prepared by nonhydrolytic sol-gel method using titanic chloride（TiCl4） as titanium source, methylene dichloride（CH2Cl2） as solvent, absolute ethyl alcohol（CH（-3）CH2OH） as oxygen donor. The effects of Si^（4＋） doping on the TiO2 nanocrystalline phase transformation temperature were systematically researched. The results showed that when the molar ratio of Ti^（4＋） to Si^（4＋） is 1 to1.3, TiO2 prepared by calcination at 1 100 ℃ for 1 hour exhibits rod shape and has good photocatalytic activity. Doping of Si^（4＋） makes glass phase core-shell structure forming on the surface of anatase crystal particles, which can inhibit crystal phase transformation and raise the transformation temperature, making TiO2 stable in anatase phase at 1 200 ℃.展开更多
Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the ...Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the earthquake catalogue.The existing earthquake catalogue contains both historical and recent instrumental data sets and it is inadequate to use only one part.Combining the large number of historical events with recent complete records and taking the magnitude uncertainty into account,Kijko’s method gives the maximum likelihood estimation of b value and annual activity rate,which might be more realistic.On the other hand,this method considers the source zone boundary uncertainty in seismic hazard analysis,which means the earthquake activity rate across a boundary of a source zone changes smoothly instead of abruptly and avoids too large a gradient in the calculated results.展开更多
In present paper,a study on reconstitution of porcine oocytes by using nuclear transfer with cumulus cells(CC) and fibroblast cells(FC) was carried out.Reconstituted oocytes which were the fusion with CC and showed a ...In present paper,a study on reconstitution of porcine oocytes by using nuclear transfer with cumulus cells(CC) and fibroblast cells(FC) was carried out.Reconstituted oocytes which were the fusion with CC and showed a cleavage rate of 56.7%,developed into morula (11.7%) and blastocysts (6.7%) phases which were higher than those derived from the fusion with FC( P <0.05).The results of this study also involved the effects of oocyte collection method,activation protocol and maturational age of recipient oocytes during the in vitro develpoment of nuclear transfer embryos which were reconstituted with cultured cumulus cells.The cumulus cells synchronized in G 0/G 1 phases through serum starvation culture,were transferred into enuclated oocytes which were collected by aspiration or dissection method and cultured for 33 or 44 h.Reconstituted embryos were activated with a combination of calcium ionophore A23187 or electric pulsation and 6 DMAP,and cultured for 6 days.As for the oocyte collection methods,activation treatment in the presence of cytochalasin B and activation protocols did not affect the developmental rate of embryos reconstituted with 44 h mature recipients.However,the development rate of reconstituted embryos with 33 h mature recipients were significantly higher( P <0.05) by activation with the combination of electric pulsation and 6 DMAP.These results suggest that the reconstituted porcine embryos derived from cultured cumulus cells can develop into the blastocyst stage and that the development of the former could be improved for the reconstitution with young oocyte cytoplast after the activation with the combination of electric pulsation and 6 DMAP.展开更多
A series of photocatalysts of un-doped, single-doped and co-doped nanometer titanium diox- ide （TiO2） have been successfully prepared by template method using Fe（NO3）3.9H2O, La（NO3）3.6H2O, and tetrabutyl titanat...A series of photocatalysts of un-doped, single-doped and co-doped nanometer titanium diox- ide （TiO2） have been successfully prepared by template method using Fe（NO3）3.9H2O, La（NO3）3.6H2O, and tetrabutyl titanate as precursors and glucan as template. Scanning electron microscopy, X-ray diffraction, and N2 adsorption-desorption measurement were employed to characterize the morphology, crystal structure and surface structure of the samples. The photo-absorbance of the obtained catalysts was measured by UV-Vis absorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl orange in an aqueous solution. The characterizations indicated that the prepared photocatalysts consisted of anatase phase and possessed high surface area of ca. 163-176 m2/g. It was shown that the Fe and La co-doped nano-TiO2 could be activated by visible light and could thus be used as an effective catalyst in photo-oxidation reactions. The synergistic effect of Fe and La co-doping played an important role in improving the photocatalytic activity. In addition, the possibility of cyclic usage of co-doped nano-TiO2 was also confirmed, the photocatalytic activity of codoped nano-TiO2 remained above 89.6% of the fresh sample after being used four times.展开更多
Convolutional neural networks （CNNs） have been applied in state-of-the-art visual tracking tasks to represent the target. However, most existing algorithms treat visual tracking as an object-specific task. Therefore...Convolutional neural networks （CNNs） have been applied in state-of-the-art visual tracking tasks to represent the target. However, most existing algorithms treat visual tracking as an object-specific task. Therefore, the model needs to be retrained for different test video sequences. We propose a branch-activated multi-domain convolutional neural network （BAMDCNN）. In contrast to most existing trackers based on CNNs which require frequent online training, BAMDCNN only needs offine training and online fine-tuning. Specifically, BAMDCNN exploits category-specific features that are more robust against variations. To allow for learning category-specific information, we introduce a group algorithm and a branch activation method. Experimental results on challenging benchmark show that the proposed algorithm outperforms other state-of-the-art methods. What＇s more, compared with CNN based trackers, BAMDCNN increases tracking speed.展开更多
Natural gas hydrate(NGH)has a bright future as a clean energy source with huge reserves.Coring is one of the most direct methods for NGH exploration and research.Preserving the in-situ properties of the core as much a...Natural gas hydrate(NGH)has a bright future as a clean energy source with huge reserves.Coring is one of the most direct methods for NGH exploration and research.Preserving the in-situ properties of the core as much as possible during the coring process is crucial for the assessment of NGH resources.However,most existing NGH coring techniques cannot preserve the in-situ temperature of NGH,leading to distortion of the physical properties of the obtained core,which makes it difficult to effectively guide NGH exploration and development.To overcome this limitation,this study introduces an innovative active temperature-preserved coring method for NGH utilizing phase change materials(PCM).An active temperature-preserved corer(ATPC)is designed and developed,and an indoor experimental system is established to investigate the heat transfer during the coring process.Based on the experimental results under different environment temperatures,a heat transfer model for the entire ATPC coring process has been established.The indoor experimental results are consistent with the theoretical predictions of the heat transfer model,confirming its validity.This model has reconstructed the temperature changes of the NGH core during the coring process,demonstrating that compared to the traditional coring method with only passive temperature-preserved measures,ATPC can effectively reduce the core temperature by more than 5.25℃.With ATPC,at environment temperatures of 15,20,25,and 30℃,the duration of low-temperature state for the NGH core is 53.85,32.87,20.32,and 11.83 min,respectively.These findings provide new perspectives on temperature-preserving core sampling in NGH and provide technical support for exploration and development in NGH.展开更多
To study the modification mechanism of activated carbon(AC)by Fe and the low-temperature NH_(3)-selective catalytic reduction(SCR)denitration mechanism of Fe/AC catalysts,Fe/AC catalysts were prepared using coconut sh...To study the modification mechanism of activated carbon(AC)by Fe and the low-temperature NH_(3)-selective catalytic reduction(SCR)denitration mechanism of Fe/AC catalysts,Fe/AC catalysts were prepared using coconut shell AC activated by nitric acid as the support and iron oxide as the active component.The crystal structure,surface morphology,pore structure,functional groups and valence states of the active components of Fe/AC catalysts were characterised by X-ray diffraction,scanning electron microscopy,nitrogen adsorption and desorption,Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy,respectively.The effect of Fe loading and calcination temperature on the low-temperature denitration of NH_(3)-SCR over Fe/AC catalysts was studied using NH_(3)as the reducing gas at low temperature(150℃).The results show that the iron oxide on the Fe/AC catalyst is spherical and uniformly dispersed on the surface of AC,thereby improving the crystallisation performance and increasing the number of active sites and specific surface area on AC in contact with the reaction gas.Hence,a rapid NH_(3)-SCR reaction was realised.When the roasting temperature remains constant,the iron oxide crystals formed by increasing the amount of loading can enter the AC pore structure and accumulate to form more micropores.When the roasting temperature is raised from 400 to 500℃,the iron oxide is mainly transformed fromα-Fe_(2)O_(3)toγ-Fe_(2)O_(3),which improves the iron oxide dispersion and increases its denitration active site,allowing gas adsorption.When the Fe loading amount is 10%,and the roasting temperature is 500℃,the NO removal rate of the Fe/AC catalyst can reach 95%.According to the study,the low-temperature NH_(3)-SCR mechanism of Fe/AC catalyst is proposed,in which the redox reaction between Fe~(2+)and Fe~(3+)will facilitate the formation of reactive oxygen vacancies,which increases the amount of oxygen adsorption on the surface,especially the increase in surface acid sites,and promotes and adsorbs more reaction gases(NH_(3),O_(2),NO).The transformation from the standard SCR reaction to the fast SCR reaction is accelerated.展开更多
文摘According to the chemical and mineral composition characteristics of the fly ash,alumina can be extracted from fly ash through the calcining method by using sodium carbonate and calcium carbonate additives.The effects on leaching rate of alumina have been investigated. The results showed that the fly ash can be activated effectively and the leaching rate of alumina can be improved to more than 92% through this method. The best process parameters were the ratio of raw materials,i. e. the material weight ratio of fly ash,calcium carbonate and sodium carbonate was 1. 0∶1. 2∶0. 9. The activating temperature was 850℃-900℃,activating time was 3 h. This process has a potential application prospect and improves the value of comprehensive utilization of fly ash.
基金Project supported by the National Natural Science Foundation and of the Ministry of Construction of China
文摘For nonlinear stability problems of discretized conservative systems with multiple parameter variables and multiple state variables, the activation method is put forward, by which activated potential functions and activated equilibrium equations are derived. The activation method is the improvement and enhancement of Liapunov-Schmidt method in elastic stability theory. It is more generalized and more normalized than conventional perturbation methods. The activated potential functions may be transformed into normalized catastrophe potential functions. The activated equilibrium equations may be treated as bifurcation equations. The researches in this paper will motivate the combination of elastic stability theory with catastrophe theory and bifurcation theory
基金supported by the National Natural Science Foundation of China(Grant No.51802059,21905070,22075062)Shenzhen Science and Technology Program(JCYJ20210324120400002,and SGDX20210823103803017)+5 种基金Key Research and Development Program of Shandong Province(2022CXGC010305)Heilongjiang Postdoctoral Fund(LBH-Z18066)Heilongjiang Touyan Team(Grant No.HITTY-20190033)the Fundamental Research Funds for the Central Universities(Grant No.FRFCU5710051922)High-Level Professional Team in Shenzhen(Grant No.KQTD20210811090045006)Guangdong Basic and Applied Basic Research Foundation(2022B1515120001).
文摘Proton exchange membrane fuel cells(PEMFCs)have been widely acknowledged as a significant advancement in achieving sustainable energy conversion.However,the activation of newly established Pt-ionomer interfaces in the catalyst layer of PEMFCs can be a time-consuming and costly process to ensure proper coupling and performance.In order to gain valuable insights into this crucial activation process,we have conducted a comprehensive analysis and comparison of the commonly employed on-line(such as current or voltage control activation,short-circuiting activation,and air interruption activation)and off-line(including boiling or steaming,acidtreatment,and ultrasonic-treatment)activation methods.Our findings shed light on the underlying mechanisms that contribute to enhanced performance within the catalyst layer,such as the reduction of Pt oxides and hydroxides,improved proton transport,and the reduction of“dead”regions.Moreover,this review emphasizes the significant challenges and future opportunities that lie in further enhancing the performance within the catalyst layer through the activation process.
基金Supported by Chinese TMSR Strategic Pioneer Science and Technology Project-The Th-U Fuel Physics Term(XDA02010100)National Natural Science Foundation of China(11205076,21327801)
文摘The ^232Th（n,γ）^233Th neutron capture reaction cross sections were measured at average neutron energies of 14.1 MeV and 14.8 MeV using the activation method.The neutron flux was determined using the monitor reaction^27Al（n,α）^24Na.The induced gamma-ray activities were measured using a low background gamma ray spectrometer equipped with a high resolution HPGe detector.The experimentally determined cross sections were compared with the data in the literature,and the evaluated data of ENDF/B-Ⅶ.1,JENDL-4.0u＋,and CENDL-3.1.The excitation functions of the ^232Th（n,γ）^233Th reaction were also calculated theoretically using the TALYS1.6 computer code.
文摘The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according to certain rules along the time axis. The synthesized command can suppress the arbitrary unwanted vibration harmonic while achieving the desired rigid body motion. The number of the components increases rapidly when the number of harmonic vibration is growing. In this article, the CSVS based on zero-placement technique is used to construct the synthesized command to suppress the multi-harmonics simultaneously in the discrete domain. The nature of zero-placement method is to put enough zeros to cancel system poles at necessary points. The designed synthesized command has equal time intervals between each component and which is much easier to be implemented. Using this method, the number of components increases linearly with the increasing of the number of being suppressed harmonics. For the spacecraft with flexible appendages, CSVS based on zero-placement is used to design the time optimal large angle maneuver control strategy. Simulations have verified the validity and superiority of the proposed approach.
基金Supported by the Key Scientific and Technological Project of Henan Province (102102110157)the Scientific Research Found Project of Henan University of Urban Construction (2010JZD008)~~
文摘[Objective] This paper aims to study a new method of extracting pumpkin polysaccharide from pumpkin. Single factor experiments were conducted to examine the effects of extracting time,temperature,the solid-liquid ratio and pH value on the extraction yield of polysaccharide from pumpkin. [Method] The best enzyme ratio and extraction conditions for complex enzymes extraction were determined through orthogonal tests. Scavenging ·OH and O-2 activities of pumpkin polysaccharides were also investigated by salicylic acid and improved self-oxidation of o-pheno methods respectively. [Results] The results showed that the biggest extraction yield of polysaccharide from pumpkin can be got when adding 1% cellulose enzyme,1.5% pectinase,1.0% papain and Na2HPO4-citric acid buffer solution (pH was 4.6),and oscillating for 30 min under water at 40 ℃ with the solid-liquid ratio of 1:30. In addition,pumpkin polysaccharides had a strong activity of eliminating ·OH,but very weak activity to scavenge O-2. [Conclusion] This study provided basic data for research and application of Pumpkin polysaccharide.
文摘Cyber-physical systems(CPSs)are regarded as the backbone of the fourth industrial revolution,in which communication,physical processes,and computer technology are integrated.In modern industrial systems,CPSs are widely utilized across various domains,such as smart grids,smart healthcare systems,smart vehicles,and smart manufacturing,among others.Due to their unique spatial distribution,CPSs are highly vulnerable to cyber-attacks,which may result in severe performance degradation and even system instability.Consequently,the security concerns of CPSs have attracted significant attention in recent years.In this paper,a comprehensive survey on the security issues of CPSs under cyber-attacks is provided.Firstly,mathematical descriptions of various types of cyberattacks are introduced in detail.Secondly,two types of secure estimation and control processing schemes,including robust methods and active methods,are reviewed.Thirdly,research findings related to secure control and estimation problems for different types of CPSs are summarized.Finally,the survey is concluded by outlining the challenges and suggesting potential research directions for the future.
基金the 2019 Major Difficult Diseases Clinical Collaboration Capacity Building Project of Traditional Chinese and Western Medicine-cerebral Infarction(No.YW082)。
文摘Vertebrobasilar dolichoectasia(VBD),a rare posterior circulation vascular variant disease,is an important risk factor for many acute cerebrovascular diseases.An insufficient understanding of VBD often leads to misdiagnose.Two cases of VBD that were initially diagnosed as posterior circulation watershed infarction are reported here.Absence of common causes of stroke including hypoperfusion,blood system diseases,carotid and aortic dissection,and eosinophil elevation,the symptoms of the 2 patients met the diagnostic criteria of VBD.Both patients displayed symptoms that were in line with the Traditional Chinese Medicine(TCM)syndrome pattern of"Qi deficiency and blood stasis".Accordingly,they were comprehensively treated with Supplementing Qi and activating blood circulation method.The clinical manifestations of the 2 patients were remarkably improved and no recurrence of watershed infarction was found in a 1-year follow-up.A detailed medical history and laboratory examination are capable of improving diagnostic accuracy of VBD.TCM treatment based on syndrome identification might be a promising candidate for VBD management.
基金financially supported by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China under Grant No. 2012BAJ22B06
文摘Stabilizing pile is a kind of earth shoring structure frequently used in slope engineering. When the piles have cantilever segments above the ground,laggings are usually installed to avoid collapse of soil between piles. Evaluating the earth pressure acting on laggings is of great importance in design process.Since laggings are usually less stiff than piles,the lateral pressure on lagging is much closer to active earth pressure. In order to estimate the lateral earth pressure on lagging more accurately,first,a model test of cantilever stabilizing pile and lagging systems was carried out. Then,basing the experimental results a three-dimensional sliding wedge model was established. Last,the calculation process of the total active force on lagging is presented based on the kinematic approach of limit analysis. A comparison is made between the total active force on lagging calculated by the formula presented in this study and the force on a same-size rigid retaining wall obtained from Rankine's theory. It is found that the proposed method fits well with the experimental results.Parametric studies show that the total active force on lagging increases with the growth of the lagging height and the lagging clear span; while decreases asthe soil internal friction angle and soil cohesion increase.
基金Funded by the National Natural Science Foundation of China (No.50708065)the National High-tech R&D Program(863 Program )(No.2007-AA-11-Z-113)the Key Projects in the Science and Technology Pillar Program of Tianjin(No.11ZCKFSF00300)
文摘In order to monitor the basic mechanical properties and interior damage of concrete structures,the piezoelectric actuator/sensor based wave propagation method was investigated experimentally in the laboratory using a specifically designed test setup.The energy attenuation of stress waves was measured by the relative index between the output voltage of sensors and the excitation voltage at the actuator.Based on the experimental results of concrete cube and cylinder specimens,the effect of excitation frequencies,excitation amplitude,wave propagation paths and the curing age on the output signals of sensors are evaluated.The results show that the relative voltage attenuation coefficient RVAC is an effective indicator for measuring the attenuation of stress waves through the interior of concrete.
基金the financial support from the office of Vice-President for Research at University of Nevada-Las Vegas
文摘Oxygen transfer presents a serious challenge in the application of liquid lead as a nuclear coolant in advanced reactors. To mitigate corrosion by liquid lead in contact with steel, carefully controlling the oxygen concentration has been used as an effective way. Oxygen needs to mix in liquid lead uniformly and quickly. To enhance oxygen transport in liquid lead, nanoparticles are added to the liquid metal. In the current study, a lattice Boltzmann method is applied to investigate natural convection of copper/lead and aluminum oxide/lead in two-dimensional simplified container. Two thermal boundary cases are evaluated in order to check the effect of different natural convection flow patterns on oxygen transport. Some useful information are obtained such as improvement in natural convection and reduction in oxygen equilibrium time.
文摘This paper aims to establish a comparison between both geomagnetic activity classification methods on foF2 diurnal variation over solar cycle phases. It concerns first a comparison of geomagnetic activity occurrences according to both classification methods;and second the geomagnetic effect on foF2 diurnal variation profiles as defined for the equatorial latitudes. The occurrences of the different disturbed geomagnetic activities (recurrent activity (RA), shock activity (SA) and fluctuant activity (FA)) according to both classifications (ancient classification (AC) and new classification (NC)) have been studied at Dakar ionosonde station (Lat: 14.8°N;Long: 342.6°E). Regarding both classifications, the RA occurs more during the decreasing phase. And it’s observed that the RA occurs the most during the increasing phase for the AC and during the minimum phase for the NC. The maximum gap of occurrence (<img src="Edit_e4627ea9-9a9a-4473-9017-202d04a16377.bmp" alt="" /><span><span style="font-family:Verdana;">) between both classifications is <span style="font-size:10.0pt;font-family:;" "=""><span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">-</span></span></span><span style="font-family:;" "=""><span style="font-family:Verdana;">11.1%</span><span style="font-family:Verdana;"> (for the negative value which is observed during the increasing phase) and </span><span style="font-family:Verdana;">+16.74%</span><span style="font-family:Verdana;"> (for the positive one which is observed during the decreasing phase). The occurrence of the SA in relation with both classifications is the lowest during the minimum phase and the maximum occurrence is observed during the maximum and decreasing phases, for the AC, with a value close to </span><span style="font-family:Verdana;">37%</span><span style="font-family:Verdana;"> and for the NC at the maximum phase with a percentage of </span><span style="font-family:Verdana;">54.47%</span><span><span style="font-family:Verdana;">. The maximum gap of occurrence (</span><img src="Edit_20fa141b-ecee-4e06-8024-144ba0969395.bmp" alt="" /></span></span><span style="font-family:Verdana;">) between both classifications is <span style="font-size:10.0pt;font-family:;" "=""><span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">-</span></span></span><span style="font-family:;" "=""><span style="font-family:Verdana;">17.85%</span><span style="font-family:Verdana;"> (for the negative value which is observed at maximum phase) and </span><span style="font-family:Verdana;">+13.53%</span><span style="font-family:Verdana;"> (for the positive one which is observed during the decreasing phase). For both classifications, the FA occurs the least during the minimum phase and the most during the maximum phase for the AC and at maximum and decreasing phases with percentage values of occurrence of roughly </span><span style="font-family:Verdana;">37%</span><span><span style="font-family:Verdana;"> for the NC. The maximum gap of occurrence (</span><img src="Edit_eecb8939-783e-4d43-b92c-80c528c1890b.bmp" alt="" /><span style="font-family:Verdana;"></span></span></span><span style="font-family:Verdana;">) between both classifications is <span style="font-size:10.0pt;font-family:;" "=""><span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">-</span></span>10% (for the negative value which is observed during the decreasing phase) and </span><span style="font-family:;" "=""><span style="font-family:Verdana;">+20.11%</span><span style="font-family:Verdana;"> (for the positive one which is observed during the maximum phase). foF2 diurnal profiles throughout solar cycle phases concerning the AC and the NC have been compared. The FA diurnal profiles don’t present a difference. The RA and the SA present a difference during minimum and increasing phases and the least at maximum and decreasing phases.</span></span></span>
文摘Prompt gamma neutron activation analysis (PGNAA) is a non-destructive online measurement nuclear analysis method. With its unique advantages, it has been widely used in online analysis of industrial materials such as coal, cement, and minerals in recent years. </span><span style="font-family:Verdana;">However, there are many kinds of literature on PGNAA in the field of industrial materials detection, and there are still a few concluding articles. To this end,</span><span style="font-family:Verdana;"> based on the principle of PGNAA online analysis, the status quo and development of the real-time online detection of industrial material components in the field are reviewed and discussed by consulting a large number of domestic and foreign PGNAA related literature and data, to facilitate the reference of relevant scientific researchers.
基金Funded by the National Natural Science Foundation of China(No.51302064)
文摘Titania（TiO2） nanorod powder was prepared by nonhydrolytic sol-gel method using titanic chloride（TiCl4） as titanium source, methylene dichloride（CH2Cl2） as solvent, absolute ethyl alcohol（CH（-3）CH2OH） as oxygen donor. The effects of Si^（4＋） doping on the TiO2 nanocrystalline phase transformation temperature were systematically researched. The results showed that when the molar ratio of Ti^（4＋） to Si^（4＋） is 1 to1.3, TiO2 prepared by calcination at 1 100 ℃ for 1 hour exhibits rod shape and has good photocatalytic activity. Doping of Si^（4＋） makes glass phase core-shell structure forming on the surface of anatase crystal particles, which can inhibit crystal phase transformation and raise the transformation temperature, making TiO2 stable in anatase phase at 1 200 ℃.
基金This project was sponsored by the State Seismological Bureau (85070102), China
文摘Two aspects of a new method,which can be used for seismic zoning,are introduced in this paper.On the one hand,the approach to estimate b value and annual activity rate proposed by Kijko and Sellevoll needs to use the earthquake catalogue.The existing earthquake catalogue contains both historical and recent instrumental data sets and it is inadequate to use only one part.Combining the large number of historical events with recent complete records and taking the magnitude uncertainty into account,Kijko’s method gives the maximum likelihood estimation of b value and annual activity rate,which might be more realistic.On the other hand,this method considers the source zone boundary uncertainty in seismic hazard analysis,which means the earthquake activity rate across a boundary of a source zone changes smoothly instead of abruptly and avoids too large a gradient in the calculated results.
文摘In present paper,a study on reconstitution of porcine oocytes by using nuclear transfer with cumulus cells(CC) and fibroblast cells(FC) was carried out.Reconstituted oocytes which were the fusion with CC and showed a cleavage rate of 56.7%,developed into morula (11.7%) and blastocysts (6.7%) phases which were higher than those derived from the fusion with FC( P <0.05).The results of this study also involved the effects of oocyte collection method,activation protocol and maturational age of recipient oocytes during the in vitro develpoment of nuclear transfer embryos which were reconstituted with cultured cumulus cells.The cumulus cells synchronized in G 0/G 1 phases through serum starvation culture,were transferred into enuclated oocytes which were collected by aspiration or dissection method and cultured for 33 or 44 h.Reconstituted embryos were activated with a combination of calcium ionophore A23187 or electric pulsation and 6 DMAP,and cultured for 6 days.As for the oocyte collection methods,activation treatment in the presence of cytochalasin B and activation protocols did not affect the developmental rate of embryos reconstituted with 44 h mature recipients.However,the development rate of reconstituted embryos with 33 h mature recipients were significantly higher( P <0.05) by activation with the combination of electric pulsation and 6 DMAP.These results suggest that the reconstituted porcine embryos derived from cultured cumulus cells can develop into the blastocyst stage and that the development of the former could be improved for the reconstitution with young oocyte cytoplast after the activation with the combination of electric pulsation and 6 DMAP.
文摘A series of photocatalysts of un-doped, single-doped and co-doped nanometer titanium diox- ide （TiO2） have been successfully prepared by template method using Fe（NO3）3.9H2O, La（NO3）3.6H2O, and tetrabutyl titanate as precursors and glucan as template. Scanning electron microscopy, X-ray diffraction, and N2 adsorption-desorption measurement were employed to characterize the morphology, crystal structure and surface structure of the samples. The photo-absorbance of the obtained catalysts was measured by UV-Vis absorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl orange in an aqueous solution. The characterizations indicated that the prepared photocatalysts consisted of anatase phase and possessed high surface area of ca. 163-176 m2/g. It was shown that the Fe and La co-doped nano-TiO2 could be activated by visible light and could thus be used as an effective catalyst in photo-oxidation reactions. The synergistic effect of Fe and La co-doping played an important role in improving the photocatalytic activity. In addition, the possibility of cyclic usage of co-doped nano-TiO2 was also confirmed, the photocatalytic activity of codoped nano-TiO2 remained above 89.6% of the fresh sample after being used four times.
基金the Innovation Action Plan Foundation of Shanghai(No.16511101200)
文摘Convolutional neural networks （CNNs） have been applied in state-of-the-art visual tracking tasks to represent the target. However, most existing algorithms treat visual tracking as an object-specific task. Therefore, the model needs to be retrained for different test video sequences. We propose a branch-activated multi-domain convolutional neural network （BAMDCNN）. In contrast to most existing trackers based on CNNs which require frequent online training, BAMDCNN only needs offine training and online fine-tuning. Specifically, BAMDCNN exploits category-specific features that are more robust against variations. To allow for learning category-specific information, we introduce a group algorithm and a branch activation method. Experimental results on challenging benchmark show that the proposed algorithm outperforms other state-of-the-art methods. What＇s more, compared with CNN based trackers, BAMDCNN increases tracking speed.
基金financially supported by Shenzhen Science and Technology Program(Nos.JSGG20220831105002005 and KJZD20231025152759002)the National Natural Science Foundation of China(Nos.52274133 and 523B2101).
文摘Natural gas hydrate(NGH)has a bright future as a clean energy source with huge reserves.Coring is one of the most direct methods for NGH exploration and research.Preserving the in-situ properties of the core as much as possible during the coring process is crucial for the assessment of NGH resources.However,most existing NGH coring techniques cannot preserve the in-situ temperature of NGH,leading to distortion of the physical properties of the obtained core,which makes it difficult to effectively guide NGH exploration and development.To overcome this limitation,this study introduces an innovative active temperature-preserved coring method for NGH utilizing phase change materials(PCM).An active temperature-preserved corer(ATPC)is designed and developed,and an indoor experimental system is established to investigate the heat transfer during the coring process.Based on the experimental results under different environment temperatures,a heat transfer model for the entire ATPC coring process has been established.The indoor experimental results are consistent with the theoretical predictions of the heat transfer model,confirming its validity.This model has reconstructed the temperature changes of the NGH core during the coring process,demonstrating that compared to the traditional coring method with only passive temperature-preserved measures,ATPC can effectively reduce the core temperature by more than 5.25℃.With ATPC,at environment temperatures of 15,20,25,and 30℃,the duration of low-temperature state for the NGH core is 53.85,32.87,20.32,and 11.83 min,respectively.These findings provide new perspectives on temperature-preserving core sampling in NGH and provide technical support for exploration and development in NGH.
基金Funded by the General Project of Science and Technology Plan of Yunnan Science and Technology Department(Nos.202001AT070029,2019FB077)Open Fund of Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education(No.FMRUlab-20-4)。
文摘To study the modification mechanism of activated carbon(AC)by Fe and the low-temperature NH_(3)-selective catalytic reduction(SCR)denitration mechanism of Fe/AC catalysts,Fe/AC catalysts were prepared using coconut shell AC activated by nitric acid as the support and iron oxide as the active component.The crystal structure,surface morphology,pore structure,functional groups and valence states of the active components of Fe/AC catalysts were characterised by X-ray diffraction,scanning electron microscopy,nitrogen adsorption and desorption,Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy,respectively.The effect of Fe loading and calcination temperature on the low-temperature denitration of NH_(3)-SCR over Fe/AC catalysts was studied using NH_(3)as the reducing gas at low temperature(150℃).The results show that the iron oxide on the Fe/AC catalyst is spherical and uniformly dispersed on the surface of AC,thereby improving the crystallisation performance and increasing the number of active sites and specific surface area on AC in contact with the reaction gas.Hence,a rapid NH_(3)-SCR reaction was realised.When the roasting temperature remains constant,the iron oxide crystals formed by increasing the amount of loading can enter the AC pore structure and accumulate to form more micropores.When the roasting temperature is raised from 400 to 500℃,the iron oxide is mainly transformed fromα-Fe_(2)O_(3)toγ-Fe_(2)O_(3),which improves the iron oxide dispersion and increases its denitration active site,allowing gas adsorption.When the Fe loading amount is 10%,and the roasting temperature is 500℃,the NO removal rate of the Fe/AC catalyst can reach 95%.According to the study,the low-temperature NH_(3)-SCR mechanism of Fe/AC catalyst is proposed,in which the redox reaction between Fe~(2+)and Fe~(3+)will facilitate the formation of reactive oxygen vacancies,which increases the amount of oxygen adsorption on the surface,especially the increase in surface acid sites,and promotes and adsorbs more reaction gases(NH_(3),O_(2),NO).The transformation from the standard SCR reaction to the fast SCR reaction is accelerated.
