To deepen understanding of the evolution of coal char microstructural properties of coal char during the co-pyrolysis of coking coal with additives,this study incorporated two typical additives,coal tar pitch(CTP)and ...To deepen understanding of the evolution of coal char microstructural properties of coal char during the co-pyrolysis of coking coal with additives,this study incorporated two typical additives,coal tar pitch(CTP)and waste plastic(HDPE),into a blended coal sample and carried out pyrolysis experiments.The pyrolysis process and the microstructure of char were systematically characterized using various analytical techniques,including thermogravimetric analysis(TGA),X-ray diffraction(XRD)and Raman spectroscopy.Data correlation analysis was performed to reveal the mechanism of carbon structural ordering evolution within the critical temperature range(350−600℃)from colloidal layer formation to semi-coke conversion in coking coal,and to elucidate the regulatory effects of different additives on coal pyrolysis pathways.The results indicate that HDPE releases free radicals during high-temperature pyrolysis,accelerating the pyrolysis reaction and increase the yield of volatile components.Conversely,CTP facilitates pyrolysis at low temperatures through its light components,thereby delaying high-temperature reactions due to the colloidal layer’s effect.XRD results indicate that during the process of pyrolysis,there is a progressive decrease in the interlayer spacing of aromatic layers(d002),while the aromatic ring stacking height(L_(c))and lateral size(L_(a))undergo significant of carbon skeleton ordering.Further comparative reveals that CTP partially suppresses structural ordering at low temperatures,whereas HDPE promotes the condensation and alignment of aromatic clusters via a free radical mechanism.Raman spectroscopy reveals a two-stage reorganization mechanism in the microstructure of the coal char:the decrease in the I_(D)/I_(G)ratio between 350 and 550℃is primarily attributed to the cleavage of aliphatic side chains and cross-linking bonds,leading to a reduction in defective structures;whereas the increase in ID/IG between 550 and 600℃is closely associated with enhanced condensation reactions of aromatic structures.Correlation analysis further demonstrates progressive graphitization during pyrolysis,with a significant positive correlation(R^(2)>0.85)observed between d002 and the full width at half maximum of the G-band(FWHM-G).展开更多
This paper reports the preparation of three di‑iron complexes containing a thiazole moiety.Esterification of complex[Fe_(2)(CO)_(6)(μ‑SCH_(2)CH(CH_(2)OH)S)](1)with 4‑methylthiazole‑5‑carboxylic acid gave the correspo...This paper reports the preparation of three di‑iron complexes containing a thiazole moiety.Esterification of complex[Fe_(2)(CO)_(6)(μ‑SCH_(2)CH(CH_(2)OH)S)](1)with 4‑methylthiazole‑5‑carboxylic acid gave the corresponding ester[Fe_(2)(CO)_(6)(μ‑tedt)](2),where tedt=SCH_(2)CH(CH_(2)OOC(5‑C_(3)HNSCH_(3)))S.Further reactions of complex 2 with tri(ptolyl)phosphine(tp)or tris(4‑fluorophenyl)phosphine(fp)gave the phosphine‑substituted derivatives[Fe_(2)(CO)_(5)(tp)(μ‑tedt)](3)and[Fe_(2)(CO)_(5)(fp)(μ‑tedt)](4).The structures of the newly prepared complexes were elucidated by elemental analysis,NMR,IR,and X‑ray photoelectron spectroscopy.Moreover,single‑crystal X‑ray diffraction analysis confirmed their molecular structures,showing that they contain a di‑iron core ligated by a bridged dithiolate bearing a thiazole moiety and terminal carbonyls.The electrochemical and electrocatalytic proton reduction were probed by cyclic voltammetry,revealing that three complexes can catalyze the reduction of protons to H_(2) under the electrochemical conditions.For comparison,complex 4 possessed the best efficiency with a turnover frequency of 23.5 s^(-1)at 10 mmol·L^(-1)HOAc concentration.In addition,the fungicidal activity of these complexes was also investigated in this study.CCDC:2477511,2;2477512,3;2477513,4.展开更多
From cracking the code of viruses to mentoring the next generation of scientists,the former president of Nankai University has contributed a lot to turning microscopic discoveries into monumental shields for global he...From cracking the code of viruses to mentoring the next generation of scientists,the former president of Nankai University has contributed a lot to turning microscopic discoveries into monumental shields for global health.OVER the past 40 years,one man has distinguished himself through a deep commitment to researching protein structures of high pathogenic viruses,and published numerous significant works in top international scientific journals.展开更多
Achieving high energy and power densities is currently a core challenge in the fabrication of energy storage materials.Although numerous high-capacity materials have been developed,conventional planar electrodes canno...Achieving high energy and power densities is currently a core challenge in the fabrication of energy storage materials.Although numerous high-capacity materials have been developed,conventional planar electrodes cannot achieve high active material loading and efficient ion/electron transport simultaneously.By contrast,three-dimensional(3D)structures have attracted increasing interest because of their capacity to enhance active material utilization,shorten ion and electron transport pathways,reduce interfacial impedance,and provide spatial accommodation for volume expansion.Additive manufacturing(AM)technology effectively fabricates energy-storage materials with 3D structures by accurately constructing complex 3D structures via layer-by-layer deposition.Recent studies have employed AM to construct ordered 3D electrodes that can optimize ion/electron transport,regulate electric field distribution,or improve the electrode-electrolyte interface,thereby contributing to enhanced kinetic performance and cycling stability.This review systematically summarizes the applications of several AM technologies in the fabrication of energy storage materials and analyzes their respective advantages and limitations.Subsequently,the advantages of AM technology in the fabrication of energy storage materials and several major optimization strategies are comprehensively discussed.Finally,the major challenges and potential applications of AM technology in energy storage material optimization are discussed.展开更多
Conventional Tb^(3+)-doped phosphors typically suffer from concentration quenching once the doping level exceeds a critical threshold.Consequently,the development of Tb^(3+)phosphors with intrinsic resistance to conce...Conventional Tb^(3+)-doped phosphors typically suffer from concentration quenching once the doping level exceeds a critical threshold.Consequently,the development of Tb^(3+)phosphors with intrinsic resistance to concentration quenching has become a key research focus.In this work,we successfully synthesized KBi(MoO_(4))_(2):x Tb^(3+)(x=0-100 at%)(denoted as KBM:x Tb^(3+))phosphors via a high-temperature solid-state reaction.Remarkably,no concentration quenching was observed across the entire doping range.This anti-quenching behavior originates from the large Tb^(3+)-Tb^(3+)interionic distance(>5Å)inherent to the quasi-layered crystal structure,which effectively suppresses multipole-interaction-mediated energy migration.At full Tb^(3+)substitution(x=100 at%),the material undergoes a structural phase transition from the monoclinic KBM phase to the triclinicα-KTb(MoO_(4))_(2)(α-KTM)phase.Theα-KTM phosphor exhibits excellent thermal stability(activation energy=0.6129 eV)and a single-exponential decay profile,whereas KBM:x Tb^(3+)(x<100%)display double-exponential decay behaviors,attributed to dual energy transfer pathways.These findings provide new insights into the luminescence mechanisms of high-concentration rare-earth-doped systems and offer guidance for designing nextgeneration anti-quenching phosphors.展开更多
Plastome variation,including single spontaneous nucleotide substitutions and single insertions/deletions,is the major source of leaf variegation in plants.Additionally,one recent study has showed that a simple plastom...Plastome variation,including single spontaneous nucleotide substitutions and single insertions/deletions,is the major source of leaf variegation in plants.Additionally,one recent study has showed that a simple plastome structural variation,which is induced by one pair of small inverted repeats,can also result in leaf variegation.Here we show a complex plastome structural variation caused by intermolecular and intramolecular recombination across three pairs of small inverted repeats accounts for leaf variegation in a widely cultivated shrub Heptapleurum ellipticum(Araliaceae).This plastome structural variation contains two deletions and two duplications,resulting in dramatic expansion of IRs,substantial contraction of LSC and loss of 11 genes that essential for photosynthesis.Plastome heteroplasmy was detected in both green and albino sectors of variegated leaves.Relative to green sectors,albino sectors in the variegated leaves exhibit significantly reduced expression for the 11 genes lost in the mutated plastome as well as 26 other genes,but significantly increased expression for one gene related to translation apparatus.Optical and transmission electron microscopy observations showed that mesophyll cells of albino sectors possess plastids lacking grana lamellae,which likely carry the mutated plastome and contribute to albinism.In both sectors,the first layer of spongy mesophyll cells beneath the lower epidermis contains normal chloroplasts,suggesting periclinal division of the lower epidermis during development.Our study demonstrates that multiple small repeats can collectively mediate intra-and inter-molecular recombination in plastome and offers a new mechanism accounting for leaf variegation in plants.展开更多
TMPRSS2 plays a crucial role in facilitating the entry of both the influenza virus and the SARSCoV-2 coronavirus into host cells.Recent studies have identified a guanine-rich sequence in the proximal promoter region o...TMPRSS2 plays a crucial role in facilitating the entry of both the influenza virus and the SARSCoV-2 coronavirus into host cells.Recent studies have identified a guanine-rich sequence in the proximal promoter region of the TMPRSS2 gene,which can form G-quadruplex structures(TMPRSS2-G4s)that are potential targets for small molecules to inhibit TMPRSS2 expression.However,the structural details of the major TMPRSS2-G4 and its complex with small molecules remain unknown,hindering the development of antiviral drugs targeting TMPRSS2-Gquadruplexes(G4s).This study reports the first high-resolution nuclear magnetic resonance(NMR)solution structure of the major TMPRSS2-G4,which consists of a three-tetrad core parallel-stranded G4.Both 3′and 5′flanking regions form well-defined capping structures stabilized by multiple hydrogen bonds.Importantly,we found that berberine,an antiviral alkaloid,strongly binds to the major TMPRSS2-G4 and determined its binding complex structure with TMPRSS2-G4 at a 2∶1 binding stoichiometry.Each berberine molecule recruits an adjacent flanking residue,forming a coplanar structure superimposed on two outer G-tetrads.Moreover,we demonstrated that the major TMPRSS2-G4 can stably form within a longer deoxyribonucleic acid(DNA)context and be targeted by small molecules to inhibit DNA polymerase activity.Overall,this study provides structural insights into the recognition mechanism of small molecules by the major TMPRSS2-G4 and may facilitate the development of novel antiviral therapeutics targeting TMPRSS2-G4.展开更多
Bamboo is a natural composite that has inspired the design of biomimetic composites due to its unique multi-scale struc-ture and outstanding mechanical properties.This paper first presents the structural features of b...Bamboo is a natural composite that has inspired the design of biomimetic composites due to its unique multi-scale struc-ture and outstanding mechanical properties.This paper first presents the structural features of bamboo,detailing the hydro-phobic wax and silica layer of the surface,the functionally graded vascular bundles of the wall for optimized toughness,and the hollow,multi-node architecture of the stem for overall stability and bending resistance.Subsequently,this study surveys recent sustainability and designability advances in bamboo-inspired composites.Inspiration from the bamboo sur-face has spurred the creation of materials with enhanced functionalities,such as transparent composites and high-stiffness structural materials.Imitation of the wall structure has led to the development of high-strength and tough materials,with the discussion covering examples such as hydrogels,polymer composites,and metal-matrix composites.Inspiration from the stem structure has yielded lightweight composites with excellent energy absorption and stability,exemplified by advanced linear materials like resilient yarns and tendon sutures,as well as functional structures like flexible sensors.These biomimetic designs show significant potential across numerous fields,including construction,healthcare,urban rail transit,wearable electronics,and mechanical engineering.Finally,this paper discusses the current limitations and challenges to understanding bamboo's structural characteristics towards the development of bamboo-inspired composites.Future research directions are proposed,including understanding bamboo's structure,designing novel biomimetic com-posites,and optimizing their structure to develop bamboo-inspired functional materials.展开更多
Wind disturbance has emerged as a potential eco-friendly method for seedling cultivation.In this study,an electromechanical device was designed and built to investigate the effects of airflow on the micro-environment ...Wind disturbance has emerged as a potential eco-friendly method for seedling cultivation.In this study,an electromechanical device was designed and built to investigate the effects of airflow on the micro-environment and physiological activities of tomato seedlings in seedbeds by controlled experiments.The results indicated that airflow could enhance CO_(2) concentration near the seedling canopy,accelerate water evaporation from the seedling substrate,and reduce fluctuations in the temperature and humidity in microclimate.The photosynthetic rates of leaves at the 4th,7th,and 10th positions in seedlings subjected to airflow increased by 25.04%,8.23%,and 8.47%,respectively,whereas the transpiration rates increased by 15.59%,22.28%,and 13.26%,respectively when compared to the control group.Additionally,the strong seedling index of seedlings treated with airflow and exogenous iron element increased by 26.02%and 31.5%,respectively.Compared to seedlings treated with exogenous iron element,the geometric mean diameter of the pith tissue cells in the stems of seedlings subjected to airflow disturbance was reduced by approximately 18.66%,while the elastic modulus and bending strength of the stems increased by 10.01%and 5.89%,respectively.Similarly,the volume of root tissue cells decreased by 19.22%,but the elastic modulus of the roots increased by 6.46%.This study confirms that airflow significantly enhances seedling resilience to abiotic stress,yielding similar or better outcomes than exogenous iron application.It provides both theoretical and practical support for using airflow disturbance as a green technology for cultivating robust seedlings.展开更多
Flexible and wearable sensors offer immense potential for rehabilitation medicine,but most rely solely on electrical signals,lacking real-time visual feedback and limiting trainee's interactivity.Inspired by the s...Flexible and wearable sensors offer immense potential for rehabilitation medicine,but most rely solely on electrical signals,lacking real-time visual feedback and limiting trainee's interactivity.Inspired by the structural coloration of Cyanocitta stelleri feathers,we developed a dual-mode sensor by utilizing black conductive polymer hydrogel(CPH)-enhanced structural color strategy.This sensor integrates a hydroxypropyl cellulose(HPC)-based structural color interface with a designed CPH sensing component.Highly visible light-absorbing CPH(absorption rate>88%)serves as the critical substrate for enhancing structural color performance.By absorbing incoherent scattered light and suppressing background interference,it significantly enhances the saturation of structural color,thereby achieving a high contrast index of 4.92.Unlike the faint and hardly visible structural colors on non-black substrates,the HPC on CPH displays vivid,highly perceptible colors and desirable mechanochromic behavior.Moreover,the CPH acts as a flexible sensing element,fortified by hydrogen and coordination bond networks,and exhibits exceptional electromechanical properties,including 867.1 kPa tensile strength,strain sensitivity(gauge factor of 4.24),and outstanding durability(over 4400 cycles).Compared to traditional single-mode sensors,the integrated sensor provides real-time visual and digital dual feedback,enhancing the accuracy and interactivity of rehabilitation assessments.This technology holds promise for advancing next-generation rehabilitation medicine.展开更多
Background:Rats are often used to prepare skin defect models.However,the skin defect sizes of the models prepared by researchers are different,and the lack of consensus on the critical-size defect makes it difficult t...Background:Rats are often used to prepare skin defect models.However,the skin defect sizes of the models prepared by researchers are different,and the lack of consensus on the critical-size defect makes it difficult to compare their research results.Methods:The time for wound closure was evaluated and recorded through gross observation.The regression equation between the healing time and the diameter of skin defect was established,which can be used to predict the healing time for a certain skin defect size in rats.Histochemical and immunohistochemical staining was used to observe the regeneration and reconstruction of skin appendages,and the functional skin repair was quantitatively scored.Results:The critical-size defect of rats was determined based on the maximum capacity of structural skin repair,and the functional skin repair was quantitatively scored based on the regeneration and reconstruction of skin appendages.The allowable range of critical-size skin defect of SD rats lies between 45 and 50 mm in diameter.The concept of structural repair and the category of functional repair of injured skin are put forward.The regression equation between the structural skin healing time and defect diameters is established.Conclusion:The allowable range of skin critical-size defect of SD rats lies between 45 and 50 mm in diameter.The regression equation between the structural skin healing time and defect diameters can be used to predict the healing time for a certain skin defect size in rats.展开更多
As structural damage patterns and service environments become more complex,digital twin-based structural health monitoring,with its unique advantages,can compensate for the limitations of data-driven methods regarding...As structural damage patterns and service environments become more complex,digital twin-based structural health monitoring,with its unique advantages,can compensate for the limitations of data-driven methods regarding data dependency and model interpretability.However,it still faces challenges in modeling complexity,simulation accuracy,and discrepancies between real and virtual features.This study proposes a balanced fidelity digital twin for structural damage monitoring based on Lamb wave multilevel feature enhancement and adaptive space interaction.Firstly,multilevel refined features are extracted from few-shot guided wave signals obtained in physical and digital space,and the adversarial synthetic balancing algorithm is proposed for feature enhancement.Additionally,the learning phase of the damage monitoring model based on the feature-mapping convolutional network is driven by virtual samples of readily accessible balanced fidelity in digital space.To reduce the feature distributional difference between the two spaces,an interactive transfer approach is introduced to establish a shared feature digital twin space.Overall,this study provides a feasible technique to enhance the accessibility and generalizability of digital twins for real engineering structures.展开更多
Electrocatalytic nitrate-to-ammonia conversion offers dual environmental and sustainable synthesis benefits,but achieving high efficiency with low-cost catalysts remains a major challenge.This review focuses on cobalt...Electrocatalytic nitrate-to-ammonia conversion offers dual environmental and sustainable synthesis benefits,but achieving high efficiency with low-cost catalysts remains a major challenge.This review focuses on cobalt-based electrocatalysts,emphasizing their structural engineering for enhanced the performance of electrocatalytic nitrate reduction reaction(NO3RR)through dimensional control,compositional tuning,and coordination microenvironment modulation.Notably,by critically analyzing metallic cobalt,cobalt alloys,cobalt compounds,cobalt single atom and molecular catalyst configurations,we firstly establish correlations between atomic-scale structural features and catalytic performance in a coordination environment perspective for NO3RR,including the dynamic reconstruction during operation and its impact on active site.Synergizing experimental breakthroughs with computational modeling,we decode mechanisms underlying competitive hydrogen evolution suppression,intermediate adsorption-energy optimization,and durability enhancement in complex aqueous environments.The development of cobalt-based catalysts was summarized and prospected,and the emerging opportunities of machine learning in accelerating the research and development of high-performance catalysts and the configuration of series reactors for scalable nitrate-to-ammonia systems were also introduced.Bridging surface science and applications,it outlines a framework for designing multifunctional electrocatalysts to restore nitrogen cycle balance sustainably.展开更多
Structural Health Monitoring(SHM)plays a critical role in ensuring the safety,integrity,longevity and economic efficiency of civil infrastructures.The field has undergone a profound transformation over the last few de...Structural Health Monitoring(SHM)plays a critical role in ensuring the safety,integrity,longevity and economic efficiency of civil infrastructures.The field has undergone a profound transformation over the last few decades,evolving from traditional methods—often reliant on visual inspections—to data-driven intelligent systems.This review paper analyzes this historical trajectory,beginning with the approaches that relied on modal parameters as primary damage indicators.The advent of advanced sensor technologies and increased computational power brings a significant change,making Machine Learning(ML)a viable and powerful tool for damage assessment.More recently,Deep Learning(DL)has emerged as a paradigm shift,allowing for more automated processing of large data sets(such as the structural vibration signals and other types of sensors)with excellent performance and accuracy,often surpassing previous methods.This paper systematically reviews these technological milestones—from traditional vibration-based methods to the current state-of-the-art in deep learning.Finally,it critically examines emerging trends—such as Digital Twins and Transformer-based architectures—and discusses future research directions that will shape the next generation of SHM systems for civil engineering.展开更多
This research centers on structural health monitoring of bridges,a critical transportation infrastructure.Owing to the cumulative action of heavy vehicle loads,environmental variations,and material aging,bridge compon...This research centers on structural health monitoring of bridges,a critical transportation infrastructure.Owing to the cumulative action of heavy vehicle loads,environmental variations,and material aging,bridge components are prone to cracks and other defects,severely compromising structural safety and service life.Traditional inspection methods relying on manual visual assessment or vehicle-mounted sensors suffer from low efficiency,strong subjectivity,and high costs,while conventional image processing techniques and early deep learning models(e.g.,UNet,Faster R-CNN)still performinadequately in complex environments(e.g.,varying illumination,noise,false cracks)due to poor perception of fine cracks andmulti-scale features,limiting practical application.To address these challenges,this paper proposes CACNN-Net(CBAM-Augmented CNN),a novel dual-encoder architecture that innovatively couples a CNN for local detail extraction with a CBAM-Transformer for global context modeling.A key contribution is the dedicated Feature FusionModule(FFM),which strategically integratesmulti-scale features and focuses attention on crack regions while suppressing irrelevant noise.Experiments on bridge crack datasets demonstrate that CACNNNet achieves a precision of 77.6%,a recall of 79.4%,and an mIoU of 62.7%.These results significantly outperform several typical models(e.g.,UNet-ResNet34,Deeplabv3),confirming their superior accuracy and robust generalization,providing a high-precision automated solution for bridge crack detection and a novel network design paradigm for structural surface defect identification in complex scenarios,while future research may integrate physical features like depth information to advance intelligent infrastructure maintenance and digital twin management.展开更多
Recent advances in geoscience have underscored the critical role of abiogenic processes in petroleum formation,especially the formation and polymerization of methane.However,whether a direct carbon-H_(2) reaction can ...Recent advances in geoscience have underscored the critical role of abiogenic processes in petroleum formation,especially the formation and polymerization of methane.However,whether a direct carbon-H_(2) reaction can produce C_(2+)hydrocarbons(e.g.,ethane and propane)beyond methane remains an open question.Here,we demonstrate the direct synthesis of ethane and propane via reactions between amorphous carbon and H_(2) under upper mantle conditions(2-10 GPa and 800-1200℃).A systematic investigation reveals that increasing structural disorder in carbon precursors,from graphite to glassy carbon-Ⅱ and carbon black,enhances the production of C_(2)-C_(3) hydrocarbons.Through integrated X-ray diffraction and reverse Monte Carlo simulations,we establish that the continuous random atomic network structures in amorphous carbon enable one-step synthesis of heavy hydrocarbons with H_(2).These models establish a direct link between atomic-scale carbon structures and the one-step synthesis of C_(2+) hydrocarbons under H_(2)-rich,high-pressure,and high-temperature conditions—potentially revealing an efficient mechanism for the abiotic production of C_(2+) hydrocarbons in the upper mantle.展开更多
Physics-informed neural networks(PINNs)have emerged as a promising class of scientific machine learning techniques that integrate governing physical laws into neural network training.Their ability to enforce different...Physics-informed neural networks(PINNs)have emerged as a promising class of scientific machine learning techniques that integrate governing physical laws into neural network training.Their ability to enforce differential equations,constitutive relations,and boundary conditions within the loss function provides a physically grounded alternative to traditional data-driven models,particularly for solid and structural mechanics,where data are often limited or noisy.This review offers a comprehensive assessment of recent developments in PINNs,combining bibliometric analysis,theoretical foundations,application-oriented insights,and methodological innovations.A biblio-metric survey indicates a rapid increase in publications on PINNs since 2018,with prominent research clusters focused on numerical methods,structural analysis,and forecasting.Building upon this trend,the review consolidates advance-ments across five principal application domains,including forward structural analysis,inverse modeling and parameter identification,structural and topology optimization,assessment of structural integrity,and manufacturing processes.These applications are propelled by substantial methodological advancements,encompassing rigorous enforcement of boundary conditions,modified loss functions,adaptive training,domain decomposition strategies,multi-fidelity and transfer learning approaches,as well as hybrid finite element–PINN integration.These advances address recurring challenges in solid mechanics,such as high-order governing equations,material heterogeneity,complex geometries,localized phenomena,and limited experimental data.Despite remaining challenges in computational cost,scalability,and experimental validation,PINNs are increasingly evolving into specialized,physics-aware tools for practical solid and structural mechanics applications.展开更多
The failure mechanisms and structural damage of SiC MOSFETs induced by heavy ion irradiation were demonstrated.The findings reveal three degradation modes,depending on the drain voltage.At a relatively low voltage,the...The failure mechanisms and structural damage of SiC MOSFETs induced by heavy ion irradiation were demonstrated.The findings reveal three degradation modes,depending on the drain voltage.At a relatively low voltage,the damage is triggered by the formation and activation of gate latent damage(LDs),with damage concentrated in the gate oxide.The second degradation mode involves permanent leakage current degradation,with damage progressively transitioning from the oxide to the SiC material as the drain voltage escalates.Ultimately,the device undergoes catastrophic burnout above certain voltages,characterized by the lattice temperature reaching the sublimation point of SiC,resulting in surface cavity and complete structural destruction.This paper presents a comprehensive investigation of SiC MOSFETs under heavy ion exposure,providing radiation resistance methods of SiC-based devices for aerospace applications.展开更多
The microstructural evolution and mechanical properties of a vacuum electron beam welded aerospace 5B70 aluminum alloy joint were studied.Quantitative analyses of the phase composition,microstructural evolution,grain ...The microstructural evolution and mechanical properties of a vacuum electron beam welded aerospace 5B70 aluminum alloy joint were studied.Quantitative analyses of the phase composition,microstructural evolution,grain size,grain boundary density,and texture changes were performed by X-ray diffraction,scanning electron microscopy,and electron backscatter diffraction.The fusion zone(FZ)comprises equiaxed cellular crystals,and a fine~20μm-thick crystal layer forms in the transition zone(TZ)between the FZ and heat affected zone(HAZ).The HAZ closely resembles the base material(BM),retaining the original rolling microstructure.Mechanical property testing shows that the fine-grained layer in the TZ exhibits the highest nanohardness,with the FZ corresponding to the lowest microhardness.The welded-joint sample has lower yield strength,ultimate tensile strength,and elongation after fracture than the BM.These reductions of mechanical properties are primarily influenced by the grain size and distribution of the precipitated phases.展开更多
基金Supported by National Natural Science Foundation of China(22378180,22078141)Education Department Foundation of Liaoning Province(JYTMS20230960)。
文摘To deepen understanding of the evolution of coal char microstructural properties of coal char during the co-pyrolysis of coking coal with additives,this study incorporated two typical additives,coal tar pitch(CTP)and waste plastic(HDPE),into a blended coal sample and carried out pyrolysis experiments.The pyrolysis process and the microstructure of char were systematically characterized using various analytical techniques,including thermogravimetric analysis(TGA),X-ray diffraction(XRD)and Raman spectroscopy.Data correlation analysis was performed to reveal the mechanism of carbon structural ordering evolution within the critical temperature range(350−600℃)from colloidal layer formation to semi-coke conversion in coking coal,and to elucidate the regulatory effects of different additives on coal pyrolysis pathways.The results indicate that HDPE releases free radicals during high-temperature pyrolysis,accelerating the pyrolysis reaction and increase the yield of volatile components.Conversely,CTP facilitates pyrolysis at low temperatures through its light components,thereby delaying high-temperature reactions due to the colloidal layer’s effect.XRD results indicate that during the process of pyrolysis,there is a progressive decrease in the interlayer spacing of aromatic layers(d002),while the aromatic ring stacking height(L_(c))and lateral size(L_(a))undergo significant of carbon skeleton ordering.Further comparative reveals that CTP partially suppresses structural ordering at low temperatures,whereas HDPE promotes the condensation and alignment of aromatic clusters via a free radical mechanism.Raman spectroscopy reveals a two-stage reorganization mechanism in the microstructure of the coal char:the decrease in the I_(D)/I_(G)ratio between 350 and 550℃is primarily attributed to the cleavage of aliphatic side chains and cross-linking bonds,leading to a reduction in defective structures;whereas the increase in ID/IG between 550 and 600℃is closely associated with enhanced condensation reactions of aromatic structures.Correlation analysis further demonstrates progressive graphitization during pyrolysis,with a significant positive correlation(R^(2)>0.85)observed between d002 and the full width at half maximum of the G-band(FWHM-G).
文摘This paper reports the preparation of three di‑iron complexes containing a thiazole moiety.Esterification of complex[Fe_(2)(CO)_(6)(μ‑SCH_(2)CH(CH_(2)OH)S)](1)with 4‑methylthiazole‑5‑carboxylic acid gave the corresponding ester[Fe_(2)(CO)_(6)(μ‑tedt)](2),where tedt=SCH_(2)CH(CH_(2)OOC(5‑C_(3)HNSCH_(3)))S.Further reactions of complex 2 with tri(ptolyl)phosphine(tp)or tris(4‑fluorophenyl)phosphine(fp)gave the phosphine‑substituted derivatives[Fe_(2)(CO)_(5)(tp)(μ‑tedt)](3)and[Fe_(2)(CO)_(5)(fp)(μ‑tedt)](4).The structures of the newly prepared complexes were elucidated by elemental analysis,NMR,IR,and X‑ray photoelectron spectroscopy.Moreover,single‑crystal X‑ray diffraction analysis confirmed their molecular structures,showing that they contain a di‑iron core ligated by a bridged dithiolate bearing a thiazole moiety and terminal carbonyls.The electrochemical and electrocatalytic proton reduction were probed by cyclic voltammetry,revealing that three complexes can catalyze the reduction of protons to H_(2) under the electrochemical conditions.For comparison,complex 4 possessed the best efficiency with a turnover frequency of 23.5 s^(-1)at 10 mmol·L^(-1)HOAc concentration.In addition,the fungicidal activity of these complexes was also investigated in this study.CCDC:2477511,2;2477512,3;2477513,4.
文摘From cracking the code of viruses to mentoring the next generation of scientists,the former president of Nankai University has contributed a lot to turning microscopic discoveries into monumental shields for global health.OVER the past 40 years,one man has distinguished himself through a deep commitment to researching protein structures of high pathogenic viruses,and published numerous significant works in top international scientific journals.
基金support of the National Natural Science Foundation of China(No.52574411)Beijing Natural Science Foundation(No.2242043).
文摘Achieving high energy and power densities is currently a core challenge in the fabrication of energy storage materials.Although numerous high-capacity materials have been developed,conventional planar electrodes cannot achieve high active material loading and efficient ion/electron transport simultaneously.By contrast,three-dimensional(3D)structures have attracted increasing interest because of their capacity to enhance active material utilization,shorten ion and electron transport pathways,reduce interfacial impedance,and provide spatial accommodation for volume expansion.Additive manufacturing(AM)technology effectively fabricates energy-storage materials with 3D structures by accurately constructing complex 3D structures via layer-by-layer deposition.Recent studies have employed AM to construct ordered 3D electrodes that can optimize ion/electron transport,regulate electric field distribution,or improve the electrode-electrolyte interface,thereby contributing to enhanced kinetic performance and cycling stability.This review systematically summarizes the applications of several AM technologies in the fabrication of energy storage materials and analyzes their respective advantages and limitations.Subsequently,the advantages of AM technology in the fabrication of energy storage materials and several major optimization strategies are comprehensively discussed.Finally,the major challenges and potential applications of AM technology in energy storage material optimization are discussed.
基金supported by the Natural Science Research Project of Anhui Province Education Department for Excellent Young Scholars(Grant No.2024AH030007)the National Natural Science Foundation of China(Grant No.52202001)。
文摘Conventional Tb^(3+)-doped phosphors typically suffer from concentration quenching once the doping level exceeds a critical threshold.Consequently,the development of Tb^(3+)phosphors with intrinsic resistance to concentration quenching has become a key research focus.In this work,we successfully synthesized KBi(MoO_(4))_(2):x Tb^(3+)(x=0-100 at%)(denoted as KBM:x Tb^(3+))phosphors via a high-temperature solid-state reaction.Remarkably,no concentration quenching was observed across the entire doping range.This anti-quenching behavior originates from the large Tb^(3+)-Tb^(3+)interionic distance(>5Å)inherent to the quasi-layered crystal structure,which effectively suppresses multipole-interaction-mediated energy migration.At full Tb^(3+)substitution(x=100 at%),the material undergoes a structural phase transition from the monoclinic KBM phase to the triclinicα-KTb(MoO_(4))_(2)(α-KTM)phase.Theα-KTM phosphor exhibits excellent thermal stability(activation energy=0.6129 eV)and a single-exponential decay profile,whereas KBM:x Tb^(3+)(x<100%)display double-exponential decay behaviors,attributed to dual energy transfer pathways.These findings provide new insights into the luminescence mechanisms of high-concentration rare-earth-doped systems and offer guidance for designing nextgeneration anti-quenching phosphors.
基金supported financially by the National Natural Science Foundation of China(31811530297 and 32170217).
文摘Plastome variation,including single spontaneous nucleotide substitutions and single insertions/deletions,is the major source of leaf variegation in plants.Additionally,one recent study has showed that a simple plastome structural variation,which is induced by one pair of small inverted repeats,can also result in leaf variegation.Here we show a complex plastome structural variation caused by intermolecular and intramolecular recombination across three pairs of small inverted repeats accounts for leaf variegation in a widely cultivated shrub Heptapleurum ellipticum(Araliaceae).This plastome structural variation contains two deletions and two duplications,resulting in dramatic expansion of IRs,substantial contraction of LSC and loss of 11 genes that essential for photosynthesis.Plastome heteroplasmy was detected in both green and albino sectors of variegated leaves.Relative to green sectors,albino sectors in the variegated leaves exhibit significantly reduced expression for the 11 genes lost in the mutated plastome as well as 26 other genes,but significantly increased expression for one gene related to translation apparatus.Optical and transmission electron microscopy observations showed that mesophyll cells of albino sectors possess plastids lacking grana lamellae,which likely carry the mutated plastome and contribute to albinism.In both sectors,the first layer of spongy mesophyll cells beneath the lower epidermis contains normal chloroplasts,suggesting periclinal division of the lower epidermis during development.Our study demonstrates that multiple small repeats can collectively mediate intra-and inter-molecular recombination in plastome and offers a new mechanism accounting for leaf variegation in plants.
基金supported by the National Natural Science Foundation of China(Nos.82322065,82173707,82204241)the Innovation and Entrepreneurship(Shuangchuang)Program of Jiang-su Province(2024)+3 种基金the Natural Science Foundation of Jiangsu Province(No.BK20221039)the Project Program of State Key Laboratory of Natural Medicines(China Pharmaceutical University,No.SKLNMZZ2024JS12)the Fundamental Research Funds for the Central Universities(No.2632025ZD06)the Scientific Research Foundation for High-level Faculty,China Pharmaceutical University(No.3150020065)。
文摘TMPRSS2 plays a crucial role in facilitating the entry of both the influenza virus and the SARSCoV-2 coronavirus into host cells.Recent studies have identified a guanine-rich sequence in the proximal promoter region of the TMPRSS2 gene,which can form G-quadruplex structures(TMPRSS2-G4s)that are potential targets for small molecules to inhibit TMPRSS2 expression.However,the structural details of the major TMPRSS2-G4 and its complex with small molecules remain unknown,hindering the development of antiviral drugs targeting TMPRSS2-Gquadruplexes(G4s).This study reports the first high-resolution nuclear magnetic resonance(NMR)solution structure of the major TMPRSS2-G4,which consists of a three-tetrad core parallel-stranded G4.Both 3′and 5′flanking regions form well-defined capping structures stabilized by multiple hydrogen bonds.Importantly,we found that berberine,an antiviral alkaloid,strongly binds to the major TMPRSS2-G4 and determined its binding complex structure with TMPRSS2-G4 at a 2∶1 binding stoichiometry.Each berberine molecule recruits an adjacent flanking residue,forming a coplanar structure superimposed on two outer G-tetrads.Moreover,we demonstrated that the major TMPRSS2-G4 can stably form within a longer deoxyribonucleic acid(DNA)context and be targeted by small molecules to inhibit DNA polymerase activity.Overall,this study provides structural insights into the recognition mechanism of small molecules by the major TMPRSS2-G4 and may facilitate the development of novel antiviral therapeutics targeting TMPRSS2-G4.
基金The 2024 First class discipline-shuishan teacher research start up fund of the Nanjing Forestry university,163,020,447,Shanyu Han.
文摘Bamboo is a natural composite that has inspired the design of biomimetic composites due to its unique multi-scale struc-ture and outstanding mechanical properties.This paper first presents the structural features of bamboo,detailing the hydro-phobic wax and silica layer of the surface,the functionally graded vascular bundles of the wall for optimized toughness,and the hollow,multi-node architecture of the stem for overall stability and bending resistance.Subsequently,this study surveys recent sustainability and designability advances in bamboo-inspired composites.Inspiration from the bamboo sur-face has spurred the creation of materials with enhanced functionalities,such as transparent composites and high-stiffness structural materials.Imitation of the wall structure has led to the development of high-strength and tough materials,with the discussion covering examples such as hydrogels,polymer composites,and metal-matrix composites.Inspiration from the stem structure has yielded lightweight composites with excellent energy absorption and stability,exemplified by advanced linear materials like resilient yarns and tendon sutures,as well as functional structures like flexible sensors.These biomimetic designs show significant potential across numerous fields,including construction,healthcare,urban rail transit,wearable electronics,and mechanical engineering.Finally,this paper discusses the current limitations and challenges to understanding bamboo's structural characteristics towards the development of bamboo-inspired composites.Future research directions are proposed,including understanding bamboo's structure,designing novel biomimetic com-posites,and optimizing their structure to develop bamboo-inspired functional materials.
基金supported by an International Cooperation Key Plan of Shaanxi Province(Grant No.2022KWZ-12)an Agricultural Science Innovation and Transformation Project of Shaanxi Province[Grant No.NYKJ-2022-YL(XN)12]a High-End Foreign Expert Recruitment Program(Grant No.G2022172006L).
文摘Wind disturbance has emerged as a potential eco-friendly method for seedling cultivation.In this study,an electromechanical device was designed and built to investigate the effects of airflow on the micro-environment and physiological activities of tomato seedlings in seedbeds by controlled experiments.The results indicated that airflow could enhance CO_(2) concentration near the seedling canopy,accelerate water evaporation from the seedling substrate,and reduce fluctuations in the temperature and humidity in microclimate.The photosynthetic rates of leaves at the 4th,7th,and 10th positions in seedlings subjected to airflow increased by 25.04%,8.23%,and 8.47%,respectively,whereas the transpiration rates increased by 15.59%,22.28%,and 13.26%,respectively when compared to the control group.Additionally,the strong seedling index of seedlings treated with airflow and exogenous iron element increased by 26.02%and 31.5%,respectively.Compared to seedlings treated with exogenous iron element,the geometric mean diameter of the pith tissue cells in the stems of seedlings subjected to airflow disturbance was reduced by approximately 18.66%,while the elastic modulus and bending strength of the stems increased by 10.01%and 5.89%,respectively.Similarly,the volume of root tissue cells decreased by 19.22%,but the elastic modulus of the roots increased by 6.46%.This study confirms that airflow significantly enhances seedling resilience to abiotic stress,yielding similar or better outcomes than exogenous iron application.It provides both theoretical and practical support for using airflow disturbance as a green technology for cultivating robust seedlings.
基金supported by the Science and Technology Development Fund,Macao SAR(0065/2023/AFJ,0116/2022/A3)the National Natural Science Foundation of China(52402166)+4 种基金the Natural Science Foundation of Guangdong Province(2025A1515011120)the Australian Research Council(DE220100154)the financial support from the Science and Technology Development Fund(FDCT),Macao SAR(No.0149/2022/A),and(No.0046/2024/AFJ)Guangdong Science and Technology Department(2023QN10C305)for this workthe financial support from the National Natural Science Foundation of China(Grant No.22305185)。
文摘Flexible and wearable sensors offer immense potential for rehabilitation medicine,but most rely solely on electrical signals,lacking real-time visual feedback and limiting trainee's interactivity.Inspired by the structural coloration of Cyanocitta stelleri feathers,we developed a dual-mode sensor by utilizing black conductive polymer hydrogel(CPH)-enhanced structural color strategy.This sensor integrates a hydroxypropyl cellulose(HPC)-based structural color interface with a designed CPH sensing component.Highly visible light-absorbing CPH(absorption rate>88%)serves as the critical substrate for enhancing structural color performance.By absorbing incoherent scattered light and suppressing background interference,it significantly enhances the saturation of structural color,thereby achieving a high contrast index of 4.92.Unlike the faint and hardly visible structural colors on non-black substrates,the HPC on CPH displays vivid,highly perceptible colors and desirable mechanochromic behavior.Moreover,the CPH acts as a flexible sensing element,fortified by hydrogen and coordination bond networks,and exhibits exceptional electromechanical properties,including 867.1 kPa tensile strength,strain sensitivity(gauge factor of 4.24),and outstanding durability(over 4400 cycles).Compared to traditional single-mode sensors,the integrated sensor provides real-time visual and digital dual feedback,enhancing the accuracy and interactivity of rehabilitation assessments.This technology holds promise for advancing next-generation rehabilitation medicine.
基金National Key Research and Development Program of China,Grant/Award Number:2023YFC2410403。
文摘Background:Rats are often used to prepare skin defect models.However,the skin defect sizes of the models prepared by researchers are different,and the lack of consensus on the critical-size defect makes it difficult to compare their research results.Methods:The time for wound closure was evaluated and recorded through gross observation.The regression equation between the healing time and the diameter of skin defect was established,which can be used to predict the healing time for a certain skin defect size in rats.Histochemical and immunohistochemical staining was used to observe the regeneration and reconstruction of skin appendages,and the functional skin repair was quantitatively scored.Results:The critical-size defect of rats was determined based on the maximum capacity of structural skin repair,and the functional skin repair was quantitatively scored based on the regeneration and reconstruction of skin appendages.The allowable range of critical-size skin defect of SD rats lies between 45 and 50 mm in diameter.The concept of structural repair and the category of functional repair of injured skin are put forward.The regression equation between the structural skin healing time and defect diameters is established.Conclusion:The allowable range of skin critical-size defect of SD rats lies between 45 and 50 mm in diameter.The regression equation between the structural skin healing time and defect diameters can be used to predict the healing time for a certain skin defect size in rats.
基金supported by the National Natural Science Foundation of China(Grant Nos.No.U2141245,11972314,11472308)。
文摘As structural damage patterns and service environments become more complex,digital twin-based structural health monitoring,with its unique advantages,can compensate for the limitations of data-driven methods regarding data dependency and model interpretability.However,it still faces challenges in modeling complexity,simulation accuracy,and discrepancies between real and virtual features.This study proposes a balanced fidelity digital twin for structural damage monitoring based on Lamb wave multilevel feature enhancement and adaptive space interaction.Firstly,multilevel refined features are extracted from few-shot guided wave signals obtained in physical and digital space,and the adversarial synthetic balancing algorithm is proposed for feature enhancement.Additionally,the learning phase of the damage monitoring model based on the feature-mapping convolutional network is driven by virtual samples of readily accessible balanced fidelity in digital space.To reduce the feature distributional difference between the two spaces,an interactive transfer approach is introduced to establish a shared feature digital twin space.Overall,this study provides a feasible technique to enhance the accessibility and generalizability of digital twins for real engineering structures.
基金supported by the National Natural Science Foundation of China(Grant Nos.:21825201,52401244 and 52201227)Henan Province Key Research and Development and Promotion Program(Scientific and Technological Breakthrough Project:232102240088 and 252102230078)+3 种基金the Key Research&Development and Promotion of Special Project(Scientific Problem Tackling)of Henan Province(252102230078)Doctoral Research Startup Fund Project of Henan Open University(BSJH-2025-04)Zhejiang Provincial Natural Science Foundation of China(LQ24B020005,LQ23B030001)China Postdoctoral Science Foundation(2024M762442).
文摘Electrocatalytic nitrate-to-ammonia conversion offers dual environmental and sustainable synthesis benefits,but achieving high efficiency with low-cost catalysts remains a major challenge.This review focuses on cobalt-based electrocatalysts,emphasizing their structural engineering for enhanced the performance of electrocatalytic nitrate reduction reaction(NO3RR)through dimensional control,compositional tuning,and coordination microenvironment modulation.Notably,by critically analyzing metallic cobalt,cobalt alloys,cobalt compounds,cobalt single atom and molecular catalyst configurations,we firstly establish correlations between atomic-scale structural features and catalytic performance in a coordination environment perspective for NO3RR,including the dynamic reconstruction during operation and its impact on active site.Synergizing experimental breakthroughs with computational modeling,we decode mechanisms underlying competitive hydrogen evolution suppression,intermediate adsorption-energy optimization,and durability enhancement in complex aqueous environments.The development of cobalt-based catalysts was summarized and prospected,and the emerging opportunities of machine learning in accelerating the research and development of high-performance catalysts and the configuration of series reactors for scalable nitrate-to-ammonia systems were also introduced.Bridging surface science and applications,it outlines a framework for designing multifunctional electrocatalysts to restore nitrogen cycle balance sustainably.
基金The authors would like to thank CNPq(Conselho Nacional de Desenvolvimento Científico e Tecnológico)—grants 407256/2022-9,303550/2025-2,402533/2023-2 and 303982/2022-5FAPEMIG(Fundação de AmparoàPesquisa do Estado de Minas Gerais)—grants APQ-00032-24 and APD-01113-25 for their financial support.
文摘Structural Health Monitoring(SHM)plays a critical role in ensuring the safety,integrity,longevity and economic efficiency of civil infrastructures.The field has undergone a profound transformation over the last few decades,evolving from traditional methods—often reliant on visual inspections—to data-driven intelligent systems.This review paper analyzes this historical trajectory,beginning with the approaches that relied on modal parameters as primary damage indicators.The advent of advanced sensor technologies and increased computational power brings a significant change,making Machine Learning(ML)a viable and powerful tool for damage assessment.More recently,Deep Learning(DL)has emerged as a paradigm shift,allowing for more automated processing of large data sets(such as the structural vibration signals and other types of sensors)with excellent performance and accuracy,often surpassing previous methods.This paper systematically reviews these technological milestones—from traditional vibration-based methods to the current state-of-the-art in deep learning.Finally,it critically examines emerging trends—such as Digital Twins and Transformer-based architectures—and discusses future research directions that will shape the next generation of SHM systems for civil engineering.
基金supported by the National Natural Science Foundation of China(No.52308332)the General Scientific Research Project of the Education Department of Zhejiang Province(No.Y202455824).
文摘This research centers on structural health monitoring of bridges,a critical transportation infrastructure.Owing to the cumulative action of heavy vehicle loads,environmental variations,and material aging,bridge components are prone to cracks and other defects,severely compromising structural safety and service life.Traditional inspection methods relying on manual visual assessment or vehicle-mounted sensors suffer from low efficiency,strong subjectivity,and high costs,while conventional image processing techniques and early deep learning models(e.g.,UNet,Faster R-CNN)still performinadequately in complex environments(e.g.,varying illumination,noise,false cracks)due to poor perception of fine cracks andmulti-scale features,limiting practical application.To address these challenges,this paper proposes CACNN-Net(CBAM-Augmented CNN),a novel dual-encoder architecture that innovatively couples a CNN for local detail extraction with a CBAM-Transformer for global context modeling.A key contribution is the dedicated Feature FusionModule(FFM),which strategically integratesmulti-scale features and focuses attention on crack regions while suppressing irrelevant noise.Experiments on bridge crack datasets demonstrate that CACNNNet achieves a precision of 77.6%,a recall of 79.4%,and an mIoU of 62.7%.These results significantly outperform several typical models(e.g.,UNet-ResNet34,Deeplabv3),confirming their superior accuracy and robust generalization,providing a high-precision automated solution for bridge crack detection and a novel network design paradigm for structural surface defect identification in complex scenarios,while future research may integrate physical features like depth information to advance intelligent infrastructure maintenance and digital twin management.
基金mainly supported by the Natural Science Foundation of China (Grant Nos. 52288102, 52090020, and 52372261)the Natural Science Foundation of Hebei Province (Grant No. E202403045)+1 种基金the S&T Program of Hebei (Grant No. 225A1102D)the Ministry of Education Chang Jiang Scholar Professor Program (Grant No. T2022241)
文摘Recent advances in geoscience have underscored the critical role of abiogenic processes in petroleum formation,especially the formation and polymerization of methane.However,whether a direct carbon-H_(2) reaction can produce C_(2+)hydrocarbons(e.g.,ethane and propane)beyond methane remains an open question.Here,we demonstrate the direct synthesis of ethane and propane via reactions between amorphous carbon and H_(2) under upper mantle conditions(2-10 GPa and 800-1200℃).A systematic investigation reveals that increasing structural disorder in carbon precursors,from graphite to glassy carbon-Ⅱ and carbon black,enhances the production of C_(2)-C_(3) hydrocarbons.Through integrated X-ray diffraction and reverse Monte Carlo simulations,we establish that the continuous random atomic network structures in amorphous carbon enable one-step synthesis of heavy hydrocarbons with H_(2).These models establish a direct link between atomic-scale carbon structures and the one-step synthesis of C_(2+) hydrocarbons under H_(2)-rich,high-pressure,and high-temperature conditions—potentially revealing an efficient mechanism for the abiotic production of C_(2+) hydrocarbons in the upper mantle.
基金funded by National Research Council of Thailand(contract No.N42A671047).
文摘Physics-informed neural networks(PINNs)have emerged as a promising class of scientific machine learning techniques that integrate governing physical laws into neural network training.Their ability to enforce differential equations,constitutive relations,and boundary conditions within the loss function provides a physically grounded alternative to traditional data-driven models,particularly for solid and structural mechanics,where data are often limited or noisy.This review offers a comprehensive assessment of recent developments in PINNs,combining bibliometric analysis,theoretical foundations,application-oriented insights,and methodological innovations.A biblio-metric survey indicates a rapid increase in publications on PINNs since 2018,with prominent research clusters focused on numerical methods,structural analysis,and forecasting.Building upon this trend,the review consolidates advance-ments across five principal application domains,including forward structural analysis,inverse modeling and parameter identification,structural and topology optimization,assessment of structural integrity,and manufacturing processes.These applications are propelled by substantial methodological advancements,encompassing rigorous enforcement of boundary conditions,modified loss functions,adaptive training,domain decomposition strategies,multi-fidelity and transfer learning approaches,as well as hybrid finite element–PINN integration.These advances address recurring challenges in solid mechanics,such as high-order governing equations,material heterogeneity,complex geometries,localized phenomena,and limited experimental data.Despite remaining challenges in computational cost,scalability,and experimental validation,PINNs are increasingly evolving into specialized,physics-aware tools for practical solid and structural mechanics applications.
基金Project supported by the National Key Research and Development Program of China(Grant No.2023YFA1609000)the National Natural Science Foundation of China(Grant Nos.U2341222,U2441248,12275061,and 12075069)。
文摘The failure mechanisms and structural damage of SiC MOSFETs induced by heavy ion irradiation were demonstrated.The findings reveal three degradation modes,depending on the drain voltage.At a relatively low voltage,the damage is triggered by the formation and activation of gate latent damage(LDs),with damage concentrated in the gate oxide.The second degradation mode involves permanent leakage current degradation,with damage progressively transitioning from the oxide to the SiC material as the drain voltage escalates.Ultimately,the device undergoes catastrophic burnout above certain voltages,characterized by the lattice temperature reaching the sublimation point of SiC,resulting in surface cavity and complete structural destruction.This paper presents a comprehensive investigation of SiC MOSFETs under heavy ion exposure,providing radiation resistance methods of SiC-based devices for aerospace applications.
基金supported by the National Natural Science Foundation of China(Nos.52175206,52205187,52130509)the Science and Technology Planning Project of Guizhou Province,China(No.ZK[2022]013)。
文摘The microstructural evolution and mechanical properties of a vacuum electron beam welded aerospace 5B70 aluminum alloy joint were studied.Quantitative analyses of the phase composition,microstructural evolution,grain size,grain boundary density,and texture changes were performed by X-ray diffraction,scanning electron microscopy,and electron backscatter diffraction.The fusion zone(FZ)comprises equiaxed cellular crystals,and a fine~20μm-thick crystal layer forms in the transition zone(TZ)between the FZ and heat affected zone(HAZ).The HAZ closely resembles the base material(BM),retaining the original rolling microstructure.Mechanical property testing shows that the fine-grained layer in the TZ exhibits the highest nanohardness,with the FZ corresponding to the lowest microhardness.The welded-joint sample has lower yield strength,ultimate tensile strength,and elongation after fracture than the BM.These reductions of mechanical properties are primarily influenced by the grain size and distribution of the precipitated phases.
