The coupling reactions of methanol and long-chain alkanes(n-dodecane,n-tetradecane and n-hexadecane)over CHA-type molecular sieves were studied in a fixed bed reactor.Over SAPO-34 and SSZ-13,it was found that the indu...The coupling reactions of methanol and long-chain alkanes(n-dodecane,n-tetradecane and n-hexadecane)over CHA-type molecular sieves were studied in a fixed bed reactor.Over SAPO-34 and SSZ-13,it was found that the induction period of methanol conversion was shortened by the introduction of long-chain alkanes.However,the addition of long-chain alkanes had little influence on the product distribution.Polymethylbenzenes and the derivatives were the main retained species on spent SSZ-13 catalyst,while adamantanes were the main retained species on SAPO-34.This indicates that coking species formation was mainly related to the further transformation of long-chain alkane/methanol coupling products at acid sites of the molecular sieve.These findings provide valuable information of long chain alkanes conversion and methanol reaction behavior of induction period over small pore CHA molecular sieves.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
This study aims to promote the optimization and upgrading of the economic structure in rural areas of China by focusing on the coupling coordination mechanism between digital economy–agriculture integration and rural...This study aims to promote the optimization and upgrading of the economic structure in rural areas of China by focusing on the coupling coordination mechanism between digital economy–agriculture integration and rural revitalization.By examining panel data from 30 Chinese provinces,autonomous regions,and municipalities between 2011 and 2022,the research constructs a weight-based evaluation system that integrates subjective and objective methods and a coupling coordination model to reveal its dynamic evolution patterns.Key findings indicate that digital economy–agriculture integration and rural revitalization achieve cross-coupling through critical activities.The impact of digital-agriculture integration on advancing rural revitalization lags by 2–3 years.Although the coupling development degree between the two systems continues to improve,it remains at the stage of primary coordination.Regional disparities are significant,showing a gradient pattern of“high degree of coupling development in the east and low degree of coupling development in the west.”展开更多
Hydraulic asphalt concrete(HAC)has been increasingly employed as an appropriate impervious structure in hydraulic and hydropower engineering.However,asphalt mortar,usually seen as the matrix of HAC composite,is partic...Hydraulic asphalt concrete(HAC)has been increasingly employed as an appropriate impervious structure in hydraulic and hydropower engineering.However,asphalt mortar,usually seen as the matrix of HAC composite,is particularly prone to damage under combined stress and seepage interactions,and the mesoscale investigations on the damage-seepage coupling behavior of HAC under complex stress states remain limited.This research develops a numerical three-dimensional mesoscale model composed of asphalt mortar and polyhedral aggregate to investigate the stress-damage-seepage coupling behavior in HAC.In this model,asphalt mortar yields the viscoelastic continuum damage law and aggregate obeys the Mazars’elastic-brittle damage law;simultaneously,the effective permeability coefficient of asphalt mortar is assumed to follow an exponential function of damage.The predicted deviatoric stress-strain and hydraulic gradient-seepage curves both are in good agreement with the reported experimental results,which shows the proposed model is valid and reasonable.The simulated results indicate that the damaged asphalt mortar can induce localized areas of high permeability,which in turn affects the overall impervious performance of HAC.展开更多
High rock temperature is a great challenge frequently encountered during subsurface resource recovery and deep underground space utilization,and it is still unclear how the granitic rock responds to realtime high temp...High rock temperature is a great challenge frequently encountered during subsurface resource recovery and deep underground space utilization,and it is still unclear how the granitic rock responds to realtime high temperature upon shear loading.To better understand the shear fracture behavior and underlying processes of intact granite exposed to thermal-mechanical coupling loading,direct shear tests were conducted utilizing a newly built testing apparatus at varied normal stresses and high temperatures.Influencesof different temperatures and different heating methods(real-time heating and thermal treatment)on the shear mechanical behavior were compared and discussed.Results indicate that shear stress fluctuationswith some small stress drops occur as shear stress is approaching the peak strength under real-time heating,accompanied by more and earlier AE signal uprushes.This suggests that greater cracking events occur earlier during real-time heating than after thermal treatment,resulting in a lower peak shear strength.Furthermore,the peak shear strength,post-peak stress drop,and cohesion rise from room temperature(RT)to 200℃(the peak strength increases by 8%,5.8%,and 9.9%under normal stress of 5 MPa,15 MPa,and 20 MPa,correspondingly),and subsequently decline from 200℃to 400℃.Temperature has a limited impact on shear stiffness from RT to 200℃,but significantlyreduces it from 200℃to 400℃,with drops of 15%,7.9%,and 10%under normal stress of 5 MPa,15 MPa,and 20 MPa,respectively.Moreover,the shear strength and stiffness under real-time heating are lower than those for the thermally treated specimens.The strengthening of intact granite below 200℃upon shear is associated with loss of water and a more compacted structure,while the weakening effect of temperature on shear strength from 200℃to 400℃is due to the new thermal cracks and less brittle and stiff of minerals.展开更多
High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear beh...High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.展开更多
Cuprous oxide(Cu_(2)O) is one of the most promising catalysts for electrochemical conversion of CO_(2) into value-added C_(2) products.The efficiency of CO_(2)-to-C_(2) conversion is highly dependent on the Cu_(2)O cr...Cuprous oxide(Cu_(2)O) is one of the most promising catalysts for electrochemical conversion of CO_(2) into value-added C_(2) products.The efficiency of CO_(2)-to-C_(2) conversion is highly dependent on the Cu_(2)O crystal plane orientation and the corresponding adsorbed ^(*)CO species.Herein,we constructed high-index crystal planes(311) in Cu_(2)O(CO-Cu_(2)O) via a facile self-selective CO-induced strategy under a CO atmosphere,which was verified by high-resolution transmission electron microscopy(HR-TEM) and atomic force microscopy(AFM) results.By exploiting the high surface energy of the high index crystal planes,^(*)CO species are stabilized in CO-Cu_(2)O during CO_(2)RR,resulting in exceptional catalytic performance for CO_(2)-to-C_(2)products.In situ infrared spectroscopy revealed that both atop-type(^(*)CO_(atop)) and hollow-type(^(*)CO_(hollow)) adsorption of ^(*)CO species occurred on the CO-Cu_(2)O.The asymmetric C-C coupling energy barrier between ^(*)CO_(atop) and ^(*)CO_(hollow) in(311) crystal plane decreases by 47.8 % compared to the symmetric coupling of ^(*)CO_(atop) in conventional(100) crystal planes.Consequently,the Faradaic efficiency of C_(2) products generated with CO-Cu_(2)O was increased by as high as 100 % compared to that with pristine Cu_(2)O.展开更多
Hydrogen,as a zero-carbon secondary energy carrier,provides a unified pathway for low-carbon energy transformation.In electro–hydrogen coupling systems(EHCSs),surplus renewable power is stored via water electrolysis ...Hydrogen,as a zero-carbon secondary energy carrier,provides a unified pathway for low-carbon energy transformation.In electro–hydrogen coupling systems(EHCSs),surplus renewable power is stored via water electrolysis and later reconverted to electricity using fuel cells or gas turbines,enhancing the system’s flexibility and reliability in support of deep decarbonization.This study constructs an electricity–hydrogen energy-recycling model based on a coupling relationship considering the bidirectional conversion between electricity and hydrogen.A multistage carbon-emission-reduction indicator constraint is also established.Additionally,the green-certificate and carbon trading markets are introduced to optimize equipment investment and operation costs while achieving carbon-emission reduction.A case study reveals that the proposed EHCS planning model effectively allocates carbon emissions across different system stages,while mitigating economic repercussions,thus ensuring closer alignment with China’s emission-reduction policies.Incorporating diverse market mechanisms significantly enhances the system’s economy and decision-making flexibility,particularly in addressing future challenges in the energy market.展开更多
Stony debris flows,characterized by coarse boulders embedded in a sediment-laden matrix,greatly amplify destructive potential by altering flow dynamics and impact forces.Conventional single-phase particle-fluidmixture...Stony debris flows,characterized by coarse boulders embedded in a sediment-laden matrix,greatly amplify destructive potential by altering flow dynamics and impact forces.Conventional single-phase particle-fluidmixture models often struggle to capture the complexities introduced by coarse boulders and multi-phase interactions,while strong-coupling methods can be computationally prohibitive for practical hazard assessments.In this study,we propose a semi-hybrid,fully resolved coupling numerical framework for modeling boulder-laden debris flows.This framework conceptualizes debris flows as a composite system comprising a continuous viscous fluidphase(including finesediments)and a discrete phase of arbitrarily shaped coarse particles.The continuous phase is treated as a generalized nonlinear Coulomb-viscoplastic fluidusing the smoothed particle hydrodynamics(SPH)method,while coarse particles are modeled via the distributed contact discrete element method(DCDEM).These two phases are coupled through an efficienttwo-way resolved scheme,ensuring accurate simulation of flow-boulder interactions within a unifiedtimeframe.We validate the proposed method against two physical experiments:(1)gravity-driven concrete flows and(2)debris flowinteracting with slit-type barriers.Results confirmthe method's robustness in accurately capturing fluid-solid-structureinteractions and deposition processes.Its capabilities are further showcased through the simulation of a stony debris-flowevent inWenchuan County,China,highlighting its promise for real-world engineering applications and validating the effectiveness of the existing cascade dam system in mitigating debrisflowimpact and energy dissipation.展开更多
Since the United Nations launched the Sustainable Development Goals(SDGs)in 2015,global implementation has steadily advanced,yet prominent challenges persist.Progress has been uneven across regions and countries,with ...Since the United Nations launched the Sustainable Development Goals(SDGs)in 2015,global implementation has steadily advanced,yet prominent challenges persist.Progress has been uneven across regions and countries,with Tajikistan representing a typical example of such disparities.Based on 81 SDG indicators for Tajikistan from 2001 to 2023,this study applied a three-level coupling network framework:at the microscale,it identified synergies and trade-offs between indicators;at the mesoscale,it examined the strength and direction of linkages within four SDG-related components(society,finance,governance,and environment);and at the global level,it focused on the overall SDG interlinkages.Spearman’s rank correlation,sliding window method,and topological properties were employed to analyze the coupling dynamics of SDGs.Results showed that over 70.00%of associations in the global SDG network were of medium-to-low intensity,alongside extremely strong ones(|r|value approached 1.00,where r is the correlation coefficient).SDG interactions were generally limited,with stable local synergy clusters in core livelihood sectors.Network modularity fluctuated,reflecting a cycle of differentiation,integration,and fragmentation,while coupling efficiency varied with the external environment.Each component exhibited distinct functional characteristics.The social component maintained high connectivity through the“poverty alleviation-education-healthcare”loop.The environmental component shifted toward coordinated eco-economic governance.The governance-related component broke interdepartmental barriers,while the financial component showed weak links between resource-based indicators and consumption/employment indicators.Tajikistan’s SDG coupling evolved through three phases:survival-oriented(2001–2012),policy integration(2013–2018),and shock adaptation(2019–2023).These phases were driven by policy changes,resource industries,governance optimization,and external factors.This study enriches the analytical framework for understanding the dynamic coupling of SDGs in mountainous resource-dependent countries and provides empirical evidence to support similar countries in formulating phase-specific SDG promotion strategies.展开更多
Deep rock engineering is affected by coupled thermo-hydro-mechanical(THM)-dynamic fields,necessitating the elucidation of the dynamic mechanical behavior and failure mechanisms.This study utilized a Multi-field Couple...Deep rock engineering is affected by coupled thermo-hydro-mechanical(THM)-dynamic fields,necessitating the elucidation of the dynamic mechanical behavior and failure mechanisms.This study utilized a Multi-field Coupled Controlled Split Hopkinson Pressure Bar(MCC-SHPB)system to elucidate the cross-scale dynamic responses of rocks and the boundaries of failure modes under THM coupling.Impact tests were conducted on green sandstone under coupled conditions of temperature(25℃-80℃),confining pressure(0-15 MPa),and seepage water pressure(0-15 MPa).Scanning electron microscopy(SEM)microstructural characterization and COMSOL Multiphysics numerical simulations were conducted,and a dynamic constitutive theoretical framework and failure-prediction methodology were established.We investigated the impact toughness index(I_(t)),dynamic modulus(E_(d)),dynamic triaxial compressive strength(TCS_(d)),fragmentation degree(W),and failure modes of green sandstone under thermo-confining pressure-seepage-impact loading conditions.The key findings reveal that the(I_(t))reflects different energy regulation mechanisms across different confining pressure regimes.Thermal-microcrack interactions dominate at low pressure,and energy absorption prevails at high pressure.A triphasic dynamic modulus model captures stiffness evolution under energy-driven conditions,revealing cross-scale crack nucleation-propagation and fragment reorganization.The TCSd inflection point signifies energy dissipation shifts,causing nonlinear skeleton bearing-capacity degradation.A critical criterion based on the W was established to distinguish between the two failure modes and predict the unstable failure initiation.Numerical simulations were used to elucidate the effects of inertia-dominated crack propagation and stress wave interference,validating the critical criterion and the predictive accuracy of the theoretical model during cross-scale failure.This study provides a theoretical foundation for assessing the dynamic stability of rock masses subjected to multi-field coupling during deep resource exploitation.展开更多
In this study,three specific scenarios of a novel accelerator light source mechanism called steady-state microbunching(SSMB)were studied:longitudinal weak focusing,longitudinal strong focusing,and generalized longitud...In this study,three specific scenarios of a novel accelerator light source mechanism called steady-state microbunching(SSMB)were studied:longitudinal weak focusing,longitudinal strong focusing,and generalized longitudinal strong focusing(GLSF).At present,GLSF is the most promising method for realizing high-power short-wavelength coherent radiation with mild requirements on modulation laser power.Its essence is to exploit the ultrasmall natural vertical emittance of an electron beam in a planar storage ring for efficient microbunching formation,like a partial transverse-longitudinal emittance exchange in the optical laser wavelength range.Based on an in-depth investigation of related beam physics,a solution for a GLSF SSMB storage ring that can deliver 1 kW average-power EUV light is presented.The work in this paper,such as the generalized Courant–Snyder formalism,analysis of theoretical minimum emittances,transverse-longitudinal coupling dynamics,and derivation of the bunching factor and modulation strengths for laser-induced microbunching schemes,is expected to be useful not only for the development of SSMB but also for future accelerator light sources in general that demand increasingly precise electron beam phase space manipulations.展开更多
Developing advanced electrocatalysts to convert CO_(2) into liquid fuels such as C_(2)H_(5)OH is critical for utilizing intermittent renewable energy.The formation of C_(2)H_(5)OH,however,is generally less favored com...Developing advanced electrocatalysts to convert CO_(2) into liquid fuels such as C_(2)H_(5)OH is critical for utilizing intermittent renewable energy.The formation of C_(2)H_(5)OH,however,is generally less favored compared with the other hydrocarbon products from Cu-based electrocatalysts.In this work,an alkanethiolmodified Cu_(2)O nanowire array(OTT-Cu_(2)O) was constructed with asymmetric Cu sites consisting of paired Cu-O and Cu-S motifs to overcome previous limitations of C_(2)H_(5)OH electrosynthesis via CO_(2)RR pathway.This catalyst achieves a high Faradaic efficiency of 45 % for CO_(2)-to-C_(2)H_(5)OH conversion at 300 m A/cm^(2),representing a more than two-fold enhancement over the Cu_(2)O electrode.Mechanistic investigations reveal that the Cu-S site exhibits distinct C-binding capability that stabilizes key intermediates(^(*)OCH_(2) and ^(*)CO),in contrast to the O-affinitive Cu-O site.The asymmetric S-Cu-O configuration promotes thermodynamically favorable asymmetric C-C coupling between ^(*)CO and ^(*)OCH_(2),forming the critical CO-OCH_(2) intermediate and facilitating C_(2)H_(5)OH production,as opposed to symmetric O-Cu-O sites that mainly generate HCOOH.This work offers an effective strategy for designing multi-active-site catalysts toward highly selective CO_(2) reduction to C_(2)H_(5)OH and provides fundamental insight into the reaction mechanism.展开更多
Defects-rich heterointerfaces integrated with adjustable crystalline phases and atom vacancies,as well as veiled dielectric-responsive character,are instrumental in electromagnetic dissipation.Conventional methods,how...Defects-rich heterointerfaces integrated with adjustable crystalline phases and atom vacancies,as well as veiled dielectric-responsive character,are instrumental in electromagnetic dissipation.Conventional methods,however,constrain their delicate constructions.Herein,an innovative alternative is proposed:carrageenan-assistant cations-regulated(CACR)strategy,which induces a series of sulfides nanoparticles rooted in situ on the surface of carbon matrix.This unique configuration originates from strategic vacancy formation energy of sulfides and strong sulfides-carbon support interaction,benefiting the delicate construction of defects-rich heterostructures in M_(x)S_(y)/carbon composites(M-CAs).Impressively,these generated sulfur vacancies are firstly found to strengthen electron accumulation/consumption ability at heterointerfaces and,simultaneously,induct local asymmetry of electronic structure to evoke large dipole moment,ultimately leading to polarization coupling,i.e.,defect-type interfacial polarization.Such“Janus effect”(Janus effect means versatility,as in the Greek two-headed Janus)of interfacial sulfur vacancies is intuitively confirmed by both theoretical and experimental investigations for the first time.Consequently,the sulfur vacancies-rich heterostructured Co/Ni-CAs displays broad absorption bandwidth of 6.76 GHz at only 1.8 mm,compared to sulfur vacancies-free CAs without any dielectric response.Harnessing defects-rich heterostructures,this one-pot CACR strategy may steer the design and development of advanced nanomaterials,boosting functionality across diverse application domains beyond electromagnetic response.展开更多
Deep tight reservoirs exhibit complex stress and seepage fields due to varying pore structures,thus the seepage characteristics are significant for enhancing oil production.This study conducted triaxial compression an...Deep tight reservoirs exhibit complex stress and seepage fields due to varying pore structures,thus the seepage characteristics are significant for enhancing oil production.This study conducted triaxial compression and permeability tests to investigate the mechanical and seepage properties of tight sandstone.A digital core of tight sandstone was built using Computed Tomography(CT)scanning,which was divided into matrix and pore phases by a pore equivalent diameter threshold.A fluid-solid coupling model was established to investigate the seepage characteristics at micro-scale.The results showed that increasing the confining pressure decreased porosity,permeability,and flow velocity,with the pore phase becoming the dominant seepage channel.Cracks and large pores closed first under increasing pressure,resulted in a steep drop in permeability.However,permeability slightly decreased under high confining pressure,which followed a first-order exponential function.Flow velocity increased with seepage pressure.And the damage mainly occurred in stress-concentration regions under low seepage pressure.Seepage behavior followed linear Darcy flow,the damage emerged at seepage entrances under high pressure,which decreased rock elastic modulus and significantly increased permeability.展开更多
Studying the coupling coordination development of new energy vehicles(NEVs)and the ecological environment in China is helpful in promoting the development of NEVs in the country and is of great significance in promoti...Studying the coupling coordination development of new energy vehicles(NEVs)and the ecological environment in China is helpful in promoting the development of NEVs in the country and is of great significance in promoting high-quality development of new energy in China.This paper constructs an evaluation index system for the development of NEVs and the ecological environment.It uses game theory combining weighting model,particle swarm optimized projection tracking evaluation model,coupling coordination degree model,and machine learning algorithms to calculate and analyze the level of coupling coordination development of NEVs and the ecological environment in China from 2010 to 2021,and identifies the driving factors.The research results show that:(i)From 2010 to 2021,the development index of NEVs in China has steadily increased from 0.085 to 0.634,while the ecological environment level index significantly rose from 0.170 to 0.884,reflecting the continuous development of China in both NEVs and the ecological environment.(ii)From 2010 to 2012,the two systems—new energy vehicle(NEV)development and the ecological environment—were in a period of imbalance and decline.From 2013 to 2016,they underwent a transition period,and from 2017 to 2021,they entered a period of coordinated development showing a trend of benign and continuous improvement.By 2021,they reached a good level of coordination.(iii)Indicators such as the number of patents granted for NEVs,water consumption per unit of GDP,and energy consumption per unit of GDP are the main driving factors affecting the coupling coordination development of NEVs and the ecological environment in China.展开更多
The occurrence of top-down(TD)cracking has gradually become a prevalent issue in semi-rigid base asphalt pavements after prolonged service.A coupled simulation model integrating the finite difference method(FDM)and di...The occurrence of top-down(TD)cracking has gradually become a prevalent issue in semi-rigid base asphalt pavements after prolonged service.A coupled simulation model integrating the finite difference method(FDM)and discrete element method(DEM)was employed to investigate the mechanical behavior of asphalt pavement containing a pre-existing TD crack.The mesoscopic parameters of the model were calibrated based on the mixture modulus and the static mechanical response on the MLS66 test road.Finally,an analysis was performed to assess how variations in TD crack depth and longitudinal length affect the distribution patterns of transverse tensile stress,vertical shear stress,and vertical compressive stress.The results indicate that the vertical propagation of TD crack significantly increases both the tensile stress value and range on the middle surface,while the longitudinal development of TD crack has minimal impact.This phenomenon may result in more severe fatigue failure on the middle surface.With the vertical and longitudinal development of TD crack,the vertical shear stress and compressive stress show obvious"two-stage"characteristics.When the crack's vertical length reaches 40 mm,there is a sharp increase in stress on the upper surface.As the crack continues to propagate vertically,the growth of stress on the upper surface becomes negligible,while the stress in the middle and lower layers increased significantly.Conversely,for longitudinal development of TD crack,any changes in stress are insignificant when their length is less than 180 mm;however,as they continue to develop longitudinally beyond this threshold,there is a sharp increase in stress levels.These findings hold great significance for understanding pavement structure deterioration and maintenance behavior associated with TD crack.展开更多
Electrochemical conversion of lignin for the production of high-value heterocyclic aromatic compounds has great potential.We demonstrate the targeted synthesis and cation modulation of NiCo_(2)O_(4)spinel nanoboxes,sy...Electrochemical conversion of lignin for the production of high-value heterocyclic aromatic compounds has great potential.We demonstrate the targeted synthesis and cation modulation of NiCo_(2)O_(4)spinel nanoboxes,synthesized via cation exchange and calcination oxidation.These catalysts exhibit excellent efficacy in the electrocatalytic conversion of lignin model compounds,specifically 2-phenoxy-1-phenylethanol,into nitrogen-containing aromatics,achieving high conversion rates and selectivities.These catalysts were synthesized via a cation exchange and calcination oxidation process,using Prussian blue nanocubes as precursors.The porous architecture and polymetallic composition of the NiCo_(2)O_(4)spinel demonstrated superior performance in electrocatalytic oxidative coupling,achieving a 99.2 wt%conversion rate of the 2-phenoxy-1-phenylethanol with selectivities of 37.5 wt%for quinoline derivatives and 31.5 wt%for phenol.Key innovations include the development of a sustainable one-pot synthesis method for quinoline derivatives,the elucidation of a multistage reaction pathway involving CAO bond cleavage,hydroxyaldol condensation,and CAN bond formation,and a deeper mechanistic understanding derived from DFT simulations.This work establishes a new strategy for lignin valorization,offering a sustainable route to produce high-value nitrogen-containing aromatics from renewable biomass under mild conditions,without the need for additional reagents.展开更多
Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show ...Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.展开更多
基金Supported by National Natural Science Foundation of China(21991093)。
文摘The coupling reactions of methanol and long-chain alkanes(n-dodecane,n-tetradecane and n-hexadecane)over CHA-type molecular sieves were studied in a fixed bed reactor.Over SAPO-34 and SSZ-13,it was found that the induction period of methanol conversion was shortened by the introduction of long-chain alkanes.However,the addition of long-chain alkanes had little influence on the product distribution.Polymethylbenzenes and the derivatives were the main retained species on spent SSZ-13 catalyst,while adamantanes were the main retained species on SAPO-34.This indicates that coking species formation was mainly related to the further transformation of long-chain alkane/methanol coupling products at acid sites of the molecular sieve.These findings provide valuable information of long chain alkanes conversion and methanol reaction behavior of induction period over small pore CHA molecular sieves.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
基金Youth project under the National Social Science Foundation of China(15CJY054)key project in Philosophy and Social Sciences funded by the Chongqing Municipal Education Commission(22SKGH091)。
文摘This study aims to promote the optimization and upgrading of the economic structure in rural areas of China by focusing on the coupling coordination mechanism between digital economy–agriculture integration and rural revitalization.By examining panel data from 30 Chinese provinces,autonomous regions,and municipalities between 2011 and 2022,the research constructs a weight-based evaluation system that integrates subjective and objective methods and a coupling coordination model to reveal its dynamic evolution patterns.Key findings indicate that digital economy–agriculture integration and rural revitalization achieve cross-coupling through critical activities.The impact of digital-agriculture integration on advancing rural revitalization lags by 2–3 years.Although the coupling development degree between the two systems continues to improve,it remains at the stage of primary coordination.Regional disparities are significant,showing a gradient pattern of“high degree of coupling development in the east and low degree of coupling development in the west.”
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC3005603-01)the Natural Science Foundation Science of Anhui Province(Grant No.2308085US02).
文摘Hydraulic asphalt concrete(HAC)has been increasingly employed as an appropriate impervious structure in hydraulic and hydropower engineering.However,asphalt mortar,usually seen as the matrix of HAC composite,is particularly prone to damage under combined stress and seepage interactions,and the mesoscale investigations on the damage-seepage coupling behavior of HAC under complex stress states remain limited.This research develops a numerical three-dimensional mesoscale model composed of asphalt mortar and polyhedral aggregate to investigate the stress-damage-seepage coupling behavior in HAC.In this model,asphalt mortar yields the viscoelastic continuum damage law and aggregate obeys the Mazars’elastic-brittle damage law;simultaneously,the effective permeability coefficient of asphalt mortar is assumed to follow an exponential function of damage.The predicted deviatoric stress-strain and hydraulic gradient-seepage curves both are in good agreement with the reported experimental results,which shows the proposed model is valid and reasonable.The simulated results indicate that the damaged asphalt mortar can induce localized areas of high permeability,which in turn affects the overall impervious performance of HAC.
基金support from the Taishan Scholars Program,Key Research Program of Frontier Sciences,Chinese Academy of Sciences(CAS),Grant No.ZDBS-LY-DQC022Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety,Grant No.SKLGME023003.
文摘High rock temperature is a great challenge frequently encountered during subsurface resource recovery and deep underground space utilization,and it is still unclear how the granitic rock responds to realtime high temperature upon shear loading.To better understand the shear fracture behavior and underlying processes of intact granite exposed to thermal-mechanical coupling loading,direct shear tests were conducted utilizing a newly built testing apparatus at varied normal stresses and high temperatures.Influencesof different temperatures and different heating methods(real-time heating and thermal treatment)on the shear mechanical behavior were compared and discussed.Results indicate that shear stress fluctuationswith some small stress drops occur as shear stress is approaching the peak strength under real-time heating,accompanied by more and earlier AE signal uprushes.This suggests that greater cracking events occur earlier during real-time heating than after thermal treatment,resulting in a lower peak shear strength.Furthermore,the peak shear strength,post-peak stress drop,and cohesion rise from room temperature(RT)to 200℃(the peak strength increases by 8%,5.8%,and 9.9%under normal stress of 5 MPa,15 MPa,and 20 MPa,correspondingly),and subsequently decline from 200℃to 400℃.Temperature has a limited impact on shear stiffness from RT to 200℃,but significantlyreduces it from 200℃to 400℃,with drops of 15%,7.9%,and 10%under normal stress of 5 MPa,15 MPa,and 20 MPa,respectively.Moreover,the shear strength and stiffness under real-time heating are lower than those for the thermally treated specimens.The strengthening of intact granite below 200℃upon shear is associated with loss of water and a more compacted structure,while the weakening effect of temperature on shear strength from 200℃to 400℃is due to the new thermal cracks and less brittle and stiff of minerals.
基金support from the National Key Research and Development Program of China(Grant No.2022YFE0137200)supported by the Taishan Scholars Program and Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety(Grant No.SKLGME023003).
文摘High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.
基金the financial support from the National Natural Science Foundation of China (Nos.U23A20677,22022610 and 52400137)"Pioneer" and "Leading Goose" R&D Program of Zhejiang (Nos.2022C03146 and 2023C03017)+2 种基金China Postdoctoral Science Foundation (No.2024T170805)Zhejiang Provincial Natural Science Foundation of China (No.LDT23E06015B06)the support of the Research Computing Center in College of Chemical and Biological Engineering at Zhejiang University for assistance with the calculations。
文摘Cuprous oxide(Cu_(2)O) is one of the most promising catalysts for electrochemical conversion of CO_(2) into value-added C_(2) products.The efficiency of CO_(2)-to-C_(2) conversion is highly dependent on the Cu_(2)O crystal plane orientation and the corresponding adsorbed ^(*)CO species.Herein,we constructed high-index crystal planes(311) in Cu_(2)O(CO-Cu_(2)O) via a facile self-selective CO-induced strategy under a CO atmosphere,which was verified by high-resolution transmission electron microscopy(HR-TEM) and atomic force microscopy(AFM) results.By exploiting the high surface energy of the high index crystal planes,^(*)CO species are stabilized in CO-Cu_(2)O during CO_(2)RR,resulting in exceptional catalytic performance for CO_(2)-to-C_(2)products.In situ infrared spectroscopy revealed that both atop-type(^(*)CO_(atop)) and hollow-type(^(*)CO_(hollow)) adsorption of ^(*)CO species occurred on the CO-Cu_(2)O.The asymmetric C-C coupling energy barrier between ^(*)CO_(atop) and ^(*)CO_(hollow) in(311) crystal plane decreases by 47.8 % compared to the symmetric coupling of ^(*)CO_(atop) in conventional(100) crystal planes.Consequently,the Faradaic efficiency of C_(2) products generated with CO-Cu_(2)O was increased by as high as 100 % compared to that with pristine Cu_(2)O.
基金supported by State Grid Jiangsu Electric Power Co.,Ltd.Technology Project(Research on Planning and Operation Technology of Electric–Hydrogen Coupling System Driven by the Electric–Carbon–Green Certificate Market):J2024005.
文摘Hydrogen,as a zero-carbon secondary energy carrier,provides a unified pathway for low-carbon energy transformation.In electro–hydrogen coupling systems(EHCSs),surplus renewable power is stored via water electrolysis and later reconverted to electricity using fuel cells or gas turbines,enhancing the system’s flexibility and reliability in support of deep decarbonization.This study constructs an electricity–hydrogen energy-recycling model based on a coupling relationship considering the bidirectional conversion between electricity and hydrogen.A multistage carbon-emission-reduction indicator constraint is also established.Additionally,the green-certificate and carbon trading markets are introduced to optimize equipment investment and operation costs while achieving carbon-emission reduction.A case study reveals that the proposed EHCS planning model effectively allocates carbon emissions across different system stages,while mitigating economic repercussions,thus ensuring closer alignment with China’s emission-reduction policies.Incorporating diverse market mechanisms significantly enhances the system’s economy and decision-making flexibility,particularly in addressing future challenges in the energy market.
基金supported by the Japan Society for the Promotion of Science(JSPS)KAKENHI(Grant Nos.JP23KK0182,JP23K26356,and JP24K00971).
文摘Stony debris flows,characterized by coarse boulders embedded in a sediment-laden matrix,greatly amplify destructive potential by altering flow dynamics and impact forces.Conventional single-phase particle-fluidmixture models often struggle to capture the complexities introduced by coarse boulders and multi-phase interactions,while strong-coupling methods can be computationally prohibitive for practical hazard assessments.In this study,we propose a semi-hybrid,fully resolved coupling numerical framework for modeling boulder-laden debris flows.This framework conceptualizes debris flows as a composite system comprising a continuous viscous fluidphase(including finesediments)and a discrete phase of arbitrarily shaped coarse particles.The continuous phase is treated as a generalized nonlinear Coulomb-viscoplastic fluidusing the smoothed particle hydrodynamics(SPH)method,while coarse particles are modeled via the distributed contact discrete element method(DCDEM).These two phases are coupled through an efficienttwo-way resolved scheme,ensuring accurate simulation of flow-boulder interactions within a unifiedtimeframe.We validate the proposed method against two physical experiments:(1)gravity-driven concrete flows and(2)debris flowinteracting with slit-type barriers.Results confirmthe method's robustness in accurately capturing fluid-solid-structureinteractions and deposition processes.Its capabilities are further showcased through the simulation of a stony debris-flowevent inWenchuan County,China,highlighting its promise for real-world engineering applications and validating the effectiveness of the existing cascade dam system in mitigating debrisflowimpact and energy dissipation.
文摘Since the United Nations launched the Sustainable Development Goals(SDGs)in 2015,global implementation has steadily advanced,yet prominent challenges persist.Progress has been uneven across regions and countries,with Tajikistan representing a typical example of such disparities.Based on 81 SDG indicators for Tajikistan from 2001 to 2023,this study applied a three-level coupling network framework:at the microscale,it identified synergies and trade-offs between indicators;at the mesoscale,it examined the strength and direction of linkages within four SDG-related components(society,finance,governance,and environment);and at the global level,it focused on the overall SDG interlinkages.Spearman’s rank correlation,sliding window method,and topological properties were employed to analyze the coupling dynamics of SDGs.Results showed that over 70.00%of associations in the global SDG network were of medium-to-low intensity,alongside extremely strong ones(|r|value approached 1.00,where r is the correlation coefficient).SDG interactions were generally limited,with stable local synergy clusters in core livelihood sectors.Network modularity fluctuated,reflecting a cycle of differentiation,integration,and fragmentation,while coupling efficiency varied with the external environment.Each component exhibited distinct functional characteristics.The social component maintained high connectivity through the“poverty alleviation-education-healthcare”loop.The environmental component shifted toward coordinated eco-economic governance.The governance-related component broke interdepartmental barriers,while the financial component showed weak links between resource-based indicators and consumption/employment indicators.Tajikistan’s SDG coupling evolved through three phases:survival-oriented(2001–2012),policy integration(2013–2018),and shock adaptation(2019–2023).These phases were driven by policy changes,resource industries,governance optimization,and external factors.This study enriches the analytical framework for understanding the dynamic coupling of SDGs in mountainous resource-dependent countries and provides empirical evidence to support similar countries in formulating phase-specific SDG promotion strategies.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272411 and 42007259).
文摘Deep rock engineering is affected by coupled thermo-hydro-mechanical(THM)-dynamic fields,necessitating the elucidation of the dynamic mechanical behavior and failure mechanisms.This study utilized a Multi-field Coupled Controlled Split Hopkinson Pressure Bar(MCC-SHPB)system to elucidate the cross-scale dynamic responses of rocks and the boundaries of failure modes under THM coupling.Impact tests were conducted on green sandstone under coupled conditions of temperature(25℃-80℃),confining pressure(0-15 MPa),and seepage water pressure(0-15 MPa).Scanning electron microscopy(SEM)microstructural characterization and COMSOL Multiphysics numerical simulations were conducted,and a dynamic constitutive theoretical framework and failure-prediction methodology were established.We investigated the impact toughness index(I_(t)),dynamic modulus(E_(d)),dynamic triaxial compressive strength(TCS_(d)),fragmentation degree(W),and failure modes of green sandstone under thermo-confining pressure-seepage-impact loading conditions.The key findings reveal that the(I_(t))reflects different energy regulation mechanisms across different confining pressure regimes.Thermal-microcrack interactions dominate at low pressure,and energy absorption prevails at high pressure.A triphasic dynamic modulus model captures stiffness evolution under energy-driven conditions,revealing cross-scale crack nucleation-propagation and fragment reorganization.The TCSd inflection point signifies energy dissipation shifts,causing nonlinear skeleton bearing-capacity degradation.A critical criterion based on the W was established to distinguish between the two failure modes and predict the unstable failure initiation.Numerical simulations were used to elucidate the effects of inertia-dominated crack propagation and stress wave interference,validating the critical criterion and the predictive accuracy of the theoretical model during cross-scale failure.This study provides a theoretical foundation for assessing the dynamic stability of rock masses subjected to multi-field coupling during deep resource exploitation.
基金supported by the National Key Research and Development Program of China(No.2022YFA1603401)National Natural Science Foundation of China(Nos.12035010 and 12342501)+1 种基金Beijing Outstanding Young Scientist Program(No.JWZQ20240101006)the Tsinghua University Dushi Program.
文摘In this study,three specific scenarios of a novel accelerator light source mechanism called steady-state microbunching(SSMB)were studied:longitudinal weak focusing,longitudinal strong focusing,and generalized longitudinal strong focusing(GLSF).At present,GLSF is the most promising method for realizing high-power short-wavelength coherent radiation with mild requirements on modulation laser power.Its essence is to exploit the ultrasmall natural vertical emittance of an electron beam in a planar storage ring for efficient microbunching formation,like a partial transverse-longitudinal emittance exchange in the optical laser wavelength range.Based on an in-depth investigation of related beam physics,a solution for a GLSF SSMB storage ring that can deliver 1 kW average-power EUV light is presented.The work in this paper,such as the generalized Courant–Snyder formalism,analysis of theoretical minimum emittances,transverse-longitudinal coupling dynamics,and derivation of the bunching factor and modulation strengths for laser-induced microbunching schemes,is expected to be useful not only for the development of SSMB but also for future accelerator light sources in general that demand increasingly precise electron beam phase space manipulations.
基金financial supports of the National Natural Science Foundation of China (NSFC,Nos.52394202,52476056,and 52301232)the Natural Science Foundation of Chongqing Province (No.2024NSCQ-MSX1109)。
文摘Developing advanced electrocatalysts to convert CO_(2) into liquid fuels such as C_(2)H_(5)OH is critical for utilizing intermittent renewable energy.The formation of C_(2)H_(5)OH,however,is generally less favored compared with the other hydrocarbon products from Cu-based electrocatalysts.In this work,an alkanethiolmodified Cu_(2)O nanowire array(OTT-Cu_(2)O) was constructed with asymmetric Cu sites consisting of paired Cu-O and Cu-S motifs to overcome previous limitations of C_(2)H_(5)OH electrosynthesis via CO_(2)RR pathway.This catalyst achieves a high Faradaic efficiency of 45 % for CO_(2)-to-C_(2)H_(5)OH conversion at 300 m A/cm^(2),representing a more than two-fold enhancement over the Cu_(2)O electrode.Mechanistic investigations reveal that the Cu-S site exhibits distinct C-binding capability that stabilizes key intermediates(^(*)OCH_(2) and ^(*)CO),in contrast to the O-affinitive Cu-O site.The asymmetric S-Cu-O configuration promotes thermodynamically favorable asymmetric C-C coupling between ^(*)CO and ^(*)OCH_(2),forming the critical CO-OCH_(2) intermediate and facilitating C_(2)H_(5)OH production,as opposed to symmetric O-Cu-O sites that mainly generate HCOOH.This work offers an effective strategy for designing multi-active-site catalysts toward highly selective CO_(2) reduction to C_(2)H_(5)OH and provides fundamental insight into the reaction mechanism.
基金financially supported by the National Natural Science Foundation of China(Grants nos.62201411,62371378,22205168,52302150 and 62304171)the China Postdoctoral Science Foundation(2022M722500)+1 种基金the Fundamental Research Funds for the Central Universities(Grants nos.ZYTS2308 and 20103237929)Startup Foundation of Xidian University(10251220001).
文摘Defects-rich heterointerfaces integrated with adjustable crystalline phases and atom vacancies,as well as veiled dielectric-responsive character,are instrumental in electromagnetic dissipation.Conventional methods,however,constrain their delicate constructions.Herein,an innovative alternative is proposed:carrageenan-assistant cations-regulated(CACR)strategy,which induces a series of sulfides nanoparticles rooted in situ on the surface of carbon matrix.This unique configuration originates from strategic vacancy formation energy of sulfides and strong sulfides-carbon support interaction,benefiting the delicate construction of defects-rich heterostructures in M_(x)S_(y)/carbon composites(M-CAs).Impressively,these generated sulfur vacancies are firstly found to strengthen electron accumulation/consumption ability at heterointerfaces and,simultaneously,induct local asymmetry of electronic structure to evoke large dipole moment,ultimately leading to polarization coupling,i.e.,defect-type interfacial polarization.Such“Janus effect”(Janus effect means versatility,as in the Greek two-headed Janus)of interfacial sulfur vacancies is intuitively confirmed by both theoretical and experimental investigations for the first time.Consequently,the sulfur vacancies-rich heterostructured Co/Ni-CAs displays broad absorption bandwidth of 6.76 GHz at only 1.8 mm,compared to sulfur vacancies-free CAs without any dielectric response.Harnessing defects-rich heterostructures,this one-pot CACR strategy may steer the design and development of advanced nanomaterials,boosting functionality across diverse application domains beyond electromagnetic response.
基金financially supported by the National Natural Science Foundation of China(Nos.42272153 and 42472195)the Research Fund of PetroChina Tarim Oilfield Company(No.671023060003)the Research Fund of China National Petroleum Corporation Limited(No.2023ZZ16YJ04).
文摘Deep tight reservoirs exhibit complex stress and seepage fields due to varying pore structures,thus the seepage characteristics are significant for enhancing oil production.This study conducted triaxial compression and permeability tests to investigate the mechanical and seepage properties of tight sandstone.A digital core of tight sandstone was built using Computed Tomography(CT)scanning,which was divided into matrix and pore phases by a pore equivalent diameter threshold.A fluid-solid coupling model was established to investigate the seepage characteristics at micro-scale.The results showed that increasing the confining pressure decreased porosity,permeability,and flow velocity,with the pore phase becoming the dominant seepage channel.Cracks and large pores closed first under increasing pressure,resulted in a steep drop in permeability.However,permeability slightly decreased under high confining pressure,which followed a first-order exponential function.Flow velocity increased with seepage pressure.And the damage mainly occurred in stress-concentration regions under low seepage pressure.Seepage behavior followed linear Darcy flow,the damage emerged at seepage entrances under high pressure,which decreased rock elastic modulus and significantly increased permeability.
基金Supported by the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_0102)the China Scholarship Council Program(202406190114)。
文摘Studying the coupling coordination development of new energy vehicles(NEVs)and the ecological environment in China is helpful in promoting the development of NEVs in the country and is of great significance in promoting high-quality development of new energy in China.This paper constructs an evaluation index system for the development of NEVs and the ecological environment.It uses game theory combining weighting model,particle swarm optimized projection tracking evaluation model,coupling coordination degree model,and machine learning algorithms to calculate and analyze the level of coupling coordination development of NEVs and the ecological environment in China from 2010 to 2021,and identifies the driving factors.The research results show that:(i)From 2010 to 2021,the development index of NEVs in China has steadily increased from 0.085 to 0.634,while the ecological environment level index significantly rose from 0.170 to 0.884,reflecting the continuous development of China in both NEVs and the ecological environment.(ii)From 2010 to 2012,the two systems—new energy vehicle(NEV)development and the ecological environment—were in a period of imbalance and decline.From 2013 to 2016,they underwent a transition period,and from 2017 to 2021,they entered a period of coordinated development showing a trend of benign and continuous improvement.By 2021,they reached a good level of coordination.(iii)Indicators such as the number of patents granted for NEVs,water consumption per unit of GDP,and energy consumption per unit of GDP are the main driving factors affecting the coupling coordination development of NEVs and the ecological environment in China.
基金supported by National Key R&D Program of China(Grant No.2021YFB2601200)Open Fund of National Engineering Research Center of Highway Maintenance Technology(Changsha University of Science&Technology)(No.kfj230207).
文摘The occurrence of top-down(TD)cracking has gradually become a prevalent issue in semi-rigid base asphalt pavements after prolonged service.A coupled simulation model integrating the finite difference method(FDM)and discrete element method(DEM)was employed to investigate the mechanical behavior of asphalt pavement containing a pre-existing TD crack.The mesoscopic parameters of the model were calibrated based on the mixture modulus and the static mechanical response on the MLS66 test road.Finally,an analysis was performed to assess how variations in TD crack depth and longitudinal length affect the distribution patterns of transverse tensile stress,vertical shear stress,and vertical compressive stress.The results indicate that the vertical propagation of TD crack significantly increases both the tensile stress value and range on the middle surface,while the longitudinal development of TD crack has minimal impact.This phenomenon may result in more severe fatigue failure on the middle surface.With the vertical and longitudinal development of TD crack,the vertical shear stress and compressive stress show obvious"two-stage"characteristics.When the crack's vertical length reaches 40 mm,there is a sharp increase in stress on the upper surface.As the crack continues to propagate vertically,the growth of stress on the upper surface becomes negligible,while the stress in the middle and lower layers increased significantly.Conversely,for longitudinal development of TD crack,any changes in stress are insignificant when their length is less than 180 mm;however,as they continue to develop longitudinally beyond this threshold,there is a sharp increase in stress levels.These findings hold great significance for understanding pavement structure deterioration and maintenance behavior associated with TD crack.
基金National Natural Science Foundation of China (U23A6005 and 22078069)Project funded by China Postdoctoral Science Foundation (GZB20230172 and 2023M740748)。
文摘Electrochemical conversion of lignin for the production of high-value heterocyclic aromatic compounds has great potential.We demonstrate the targeted synthesis and cation modulation of NiCo_(2)O_(4)spinel nanoboxes,synthesized via cation exchange and calcination oxidation.These catalysts exhibit excellent efficacy in the electrocatalytic conversion of lignin model compounds,specifically 2-phenoxy-1-phenylethanol,into nitrogen-containing aromatics,achieving high conversion rates and selectivities.These catalysts were synthesized via a cation exchange and calcination oxidation process,using Prussian blue nanocubes as precursors.The porous architecture and polymetallic composition of the NiCo_(2)O_(4)spinel demonstrated superior performance in electrocatalytic oxidative coupling,achieving a 99.2 wt%conversion rate of the 2-phenoxy-1-phenylethanol with selectivities of 37.5 wt%for quinoline derivatives and 31.5 wt%for phenol.Key innovations include the development of a sustainable one-pot synthesis method for quinoline derivatives,the elucidation of a multistage reaction pathway involving CAO bond cleavage,hydroxyaldol condensation,and CAN bond formation,and a deeper mechanistic understanding derived from DFT simulations.This work establishes a new strategy for lignin valorization,offering a sustainable route to produce high-value nitrogen-containing aromatics from renewable biomass under mild conditions,without the need for additional reagents.
基金funded by the National Natural Science Founda-tion of China(52071109).
文摘Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.
