Aiming at reducing the dust pollution during the tunneling process and improving the application efficiency of air curtain dust prevention technology,according to the changes of radial jet velocity(v_(r)),axial extrac...Aiming at reducing the dust pollution during the tunneling process and improving the application efficiency of air curtain dust prevention technology,according to the changes of radial jet velocity(v_(r)),axial extraction velocity(v_(e))and extraction distance(L)in the formation process of air curtain,the numerical simulation method was used to analyze the rules of airflow structure evolution and the diffusion characteristics of dust particles in fully mechanized excavation tunnel.The results indicate that as v_(r) and v_(e) increase,the migration path of the wall jet of the air curtain changes into an axial direction;as L decreases,the migration distance increases accordingly.These phenomena make the airflow distribution in the working face tends to be uniform.The dust diffusion distance reduces as well,wherein,the range of the discrete area of dust particles decreases sharply,until all dust particles are concentrated in the accumulation area.On this basis,the v_(r),v_(e) and L were optimized and applied in the 63_(up) 08 fully mechanized working face.By the application of the optimal parameters,the average dust removal efficiency at the driver’s position increased by 71%.The dust concentration was reduced and the working environment had been improved effectively.展开更多
RDX/Al mixtures are widely utilized in energetic materials,yet their hybrid dust generated during production and application poses potential explosion hazards.Moreover,the synergistic explosion mechanisms remain poorl...RDX/Al mixtures are widely utilized in energetic materials,yet their hybrid dust generated during production and application poses potential explosion hazards.Moreover,the synergistic explosion mechanisms remain poorly understood,particularly at varying dust concentrations.This study systematically investigates the effects of different aluminum powder mass percentages and dust concentrations(300 g/m^(3),600 g/m^(3),900 g/m^(3))on RDX dust explosion severity,flame propagation behavior,and gaseous products.The results indicate that the maximum explosion pressure peaks at 35%RDX,65%RDX,and 80%RDX at 300 g/m^(3),600 g/m^(3),and 900 g/m^(3),respectively.Concurrently,the time for the flame to propagate to the wall(t1)reaches minimum values of 34.8 ms,25.66 ms,and 23.93 ms.The maximum rate of pressure rise is observed for pure RDX at 900 g/m^(3).Aluminum powder enhances flame propagation velocity and combustion duration,as validated by the flame propagation system.Overall,the concentrations of carbon oxides(CO+CO_(2))decrease significantly with increasing aluminum mass percentage.At 20%RDX,the concentrations decreased by 51.64%,72.31%,and 79.55%compared to pure RDX at 300 g/m^(3),600 g/m^(3),and 900 g/m^(3),respectively.Notably,N_(2)O concentration only at 300 g/m^(3)showed such a trend.It rises first and then falls at 35%RDX at 600 g/m^(3)and 900 g/m^(3).These findings elucidate the synergistic explosion mechanisms and provide critical guidelines for safe production and handling.展开更多
Mine dust is classified as one of five natural coal mining disasters because it can harm the health of miners and poses a serious threat to the safety of the coal mine. Therefore, preparation of an effective dust supp...Mine dust is classified as one of five natural coal mining disasters because it can harm the health of miners and poses a serious threat to the safety of the coal mine. Therefore, preparation of an effective dust suppression agent is highly desired. To improve the capture efficiency of fine dust, this study examines the dust suppression effects of various combinations of wetting agents, additives, and coagulation agents by using the optimum seeking method to reduce mine dust, particularly respirable particles. The optimal formula is shown to contain 10wt% fatty alcohol polyoxyethylene ether（JFC）, 4.96wt% cationic polyacrylamide, and 4wt% calcium chloride. The dust suppression effect can be achieved at 96.1% in 5 min by using the optimal formula.展开更多
The high-temperature tube furnace was applied to simulate the rotary hearth furnace （RHF） for the direct reduction of zinc-bearing dusts from steel plants. The removal mechanism of Zn, Pb and alkalis from cold bonde...The high-temperature tube furnace was applied to simulate the rotary hearth furnace （RHF） for the direct reduction of zinc-bearing dusts from steel plants. The removal mechanism of Zn, Pb and alkalis from cold bonded briquettes made by mixing metallurgical wastes, such as dust from bag house filter, OG sludge, fine converter ash and dust from the third electric field precipitator of the sinter strand, in various proportions was investigated. More than 70% of metallization rate, more than 95% of zinc removal rate, 80% of lead removal, as well as more than 80M of K and Na removal rates were achieved for the briquettes kept at 1473-1603 K for 15 min during the direct reduction process respectively. The soot generated in the direct reduction process was studied by chromatography, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results suggested that the main phases of the soot were ZnO, KC1, NaC1 and 4ZnO · ZnC12 · 5H20. Furthermore, the content of Zn reached 64.2 %, which could be used as secondary resources for zinc making. It was concluded that KC1 and NaC1 in secondary dust resulted from the volatilization from the briquettes, whilst ZnO and PbO were produced by the oxidation of Zn or lead vapour from briquettes by direct reduction.展开更多
In this study,FTIR and XPS spectroscopy,specific surface area and pore size analyses,wetting and other experimental means have been applied to investigate respirable coal dust surface properties and wetting mechanism....In this study,FTIR and XPS spectroscopy,specific surface area and pore size analyses,wetting and other experimental means have been applied to investigate respirable coal dust surface properties and wetting mechanism.The research shows that coal dust surface structures,chemical and element compositions are changed in the refining process of coal dust.Compared with large particle coal dust,respirable coal dust is a weak hydrophilic and strong hydrophobic substance.The reason:the smaller the particle size of coal dust,the more unsaturated its surface.The absorption of air is strong and it is easy to form an air film on coal dust surfaces. Coal dust contact with water is actually a compound contact of liquid in contact with a solid and gas in contact with a solid. The smaller the particle size,the larger the pore volume and the higher the degree of surface roughness,the larger the area of gas in contact with a solid and the worse the coal dust wettability.Another reason is that the changes in the composition of atoms on the dust surface and structures affect coal dust wettability.The results of this study establish a theoretical basis for the invention of effective reduced-dust technology.展开更多
The co-reduction roasting and grinding-magnetic separation of seaside titanomagnetite and blast furnace dust was investigated with and without fluorite addition at a reduction roasting temperature of 1250°C for 6...The co-reduction roasting and grinding-magnetic separation of seaside titanomagnetite and blast furnace dust was investigated with and without fluorite addition at a reduction roasting temperature of 1250°C for 60 min, a grinding fineness of-43 μm accounting for 69.02 wt% of the total, and a low-intensity magnetic field strength of 151 kA/m. The mineral composition, microstructure, and state of the roasted products were analyzed, and the concentrations of CO and CO_2 were analyzed in the co-reduction roasting. Better results were achieved with a small fluorite dosage(≤4 wt%) in the process of co-reduction. In addition, F^- was found to reduce the melting point and viscosity of the slag phase because of the high content of aluminate and silicate minerals in the blast furnace dust. The low moisture content of the blast furnace dust and calcic minerals inhibited the hydrolysis of CaF_2 and the loss of F^-. Compared with the blast furnace dust from Chengdeng, the blast furnace dusts from Jiugang and Jinxin inhibited the diffusion of F-when used as reducing agents, leading to weaker effects of fluorite.展开更多
基金financially supported by the Natural Science Foundation of Shandong Province(ZR2020QE124,ZR2023ME031 and ZR2023ME012)Innovation Achievement Cultivation Project of Qingdao University of Technology(CLZ2022-002)National Natural Science Foundation of China(52404222 and 52374209).
文摘Aiming at reducing the dust pollution during the tunneling process and improving the application efficiency of air curtain dust prevention technology,according to the changes of radial jet velocity(v_(r)),axial extraction velocity(v_(e))and extraction distance(L)in the formation process of air curtain,the numerical simulation method was used to analyze the rules of airflow structure evolution and the diffusion characteristics of dust particles in fully mechanized excavation tunnel.The results indicate that as v_(r) and v_(e) increase,the migration path of the wall jet of the air curtain changes into an axial direction;as L decreases,the migration distance increases accordingly.These phenomena make the airflow distribution in the working face tends to be uniform.The dust diffusion distance reduces as well,wherein,the range of the discrete area of dust particles decreases sharply,until all dust particles are concentrated in the accumulation area.On this basis,the v_(r),v_(e) and L were optimized and applied in the 63_(up) 08 fully mechanized working face.By the application of the optimal parameters,the average dust removal efficiency at the driver’s position increased by 71%.The dust concentration was reduced and the working environment had been improved effectively.
基金the financial support of the Shanxi Fire&Explosion-Proofing Safety Engineering and Technology Research Center,North University of China。
文摘RDX/Al mixtures are widely utilized in energetic materials,yet their hybrid dust generated during production and application poses potential explosion hazards.Moreover,the synergistic explosion mechanisms remain poorly understood,particularly at varying dust concentrations.This study systematically investigates the effects of different aluminum powder mass percentages and dust concentrations(300 g/m^(3),600 g/m^(3),900 g/m^(3))on RDX dust explosion severity,flame propagation behavior,and gaseous products.The results indicate that the maximum explosion pressure peaks at 35%RDX,65%RDX,and 80%RDX at 300 g/m^(3),600 g/m^(3),and 900 g/m^(3),respectively.Concurrently,the time for the flame to propagate to the wall(t1)reaches minimum values of 34.8 ms,25.66 ms,and 23.93 ms.The maximum rate of pressure rise is observed for pure RDX at 900 g/m^(3).Aluminum powder enhances flame propagation velocity and combustion duration,as validated by the flame propagation system.Overall,the concentrations of carbon oxides(CO+CO_(2))decrease significantly with increasing aluminum mass percentage.At 20%RDX,the concentrations decreased by 51.64%,72.31%,and 79.55%compared to pure RDX at 300 g/m^(3),600 g/m^(3),and 900 g/m^(3),respectively.Notably,N_(2)O concentration only at 300 g/m^(3)showed such a trend.It rises first and then falls at 35%RDX at 600 g/m^(3)and 900 g/m^(3).These findings elucidate the synergistic explosion mechanisms and provide critical guidelines for safe production and handling.
基金National Natural Science Funds-Coal Joint Funds Key Support Project (No. U1261205)Basic Research Plan Project of Science and Technology of Qingdao (No. 13-1-4-149-jch)Key Technology Development Projects of Qingdao Economic and Technological Development Zone (No. 2013-1-66) for providing the financial support to this research
文摘Mine dust is classified as one of five natural coal mining disasters because it can harm the health of miners and poses a serious threat to the safety of the coal mine. Therefore, preparation of an effective dust suppression agent is highly desired. To improve the capture efficiency of fine dust, this study examines the dust suppression effects of various combinations of wetting agents, additives, and coagulation agents by using the optimum seeking method to reduce mine dust, particularly respirable particles. The optimal formula is shown to contain 10wt% fatty alcohol polyoxyethylene ether（JFC）, 4.96wt% cationic polyacrylamide, and 4wt% calcium chloride. The dust suppression effect can be achieved at 96.1% in 5 min by using the optimal formula.
基金Item Sponsored by China Postdoctoral Science Foundation(2012M510320)Demonstration Project about Recycling Economy in2007of National Development and Reform Commission of China([2007]3194)
文摘The high-temperature tube furnace was applied to simulate the rotary hearth furnace （RHF） for the direct reduction of zinc-bearing dusts from steel plants. The removal mechanism of Zn, Pb and alkalis from cold bonded briquettes made by mixing metallurgical wastes, such as dust from bag house filter, OG sludge, fine converter ash and dust from the third electric field precipitator of the sinter strand, in various proportions was investigated. More than 70% of metallization rate, more than 95% of zinc removal rate, 80% of lead removal, as well as more than 80M of K and Na removal rates were achieved for the briquettes kept at 1473-1603 K for 15 min during the direct reduction process respectively. The soot generated in the direct reduction process was studied by chromatography, X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results suggested that the main phases of the soot were ZnO, KC1, NaC1 and 4ZnO · ZnC12 · 5H20. Furthermore, the content of Zn reached 64.2 %, which could be used as secondary resources for zinc making. It was concluded that KC1 and NaC1 in secondary dust resulted from the volatilization from the briquettes, whilst ZnO and PbO were produced by the oxidation of Zn or lead vapour from briquettes by direct reduction.
基金Financial support for this work,provided by the Science and Technology Project of the Education Department of Shandong Province(No.J08LC12),
文摘In this study,FTIR and XPS spectroscopy,specific surface area and pore size analyses,wetting and other experimental means have been applied to investigate respirable coal dust surface properties and wetting mechanism.The research shows that coal dust surface structures,chemical and element compositions are changed in the refining process of coal dust.Compared with large particle coal dust,respirable coal dust is a weak hydrophilic and strong hydrophobic substance.The reason:the smaller the particle size of coal dust,the more unsaturated its surface.The absorption of air is strong and it is easy to form an air film on coal dust surfaces. Coal dust contact with water is actually a compound contact of liquid in contact with a solid and gas in contact with a solid. The smaller the particle size,the larger the pore volume and the higher the degree of surface roughness,the larger the area of gas in contact with a solid and the worse the coal dust wettability.Another reason is that the changes in the composition of atoms on the dust surface and structures affect coal dust wettability.The results of this study establish a theoretical basis for the invention of effective reduced-dust technology.
基金financially supported by the National Natural Science Foundation of China (No. 51474018)
文摘The co-reduction roasting and grinding-magnetic separation of seaside titanomagnetite and blast furnace dust was investigated with and without fluorite addition at a reduction roasting temperature of 1250°C for 60 min, a grinding fineness of-43 μm accounting for 69.02 wt% of the total, and a low-intensity magnetic field strength of 151 kA/m. The mineral composition, microstructure, and state of the roasted products were analyzed, and the concentrations of CO and CO_2 were analyzed in the co-reduction roasting. Better results were achieved with a small fluorite dosage(≤4 wt%) in the process of co-reduction. In addition, F^- was found to reduce the melting point and viscosity of the slag phase because of the high content of aluminate and silicate minerals in the blast furnace dust. The low moisture content of the blast furnace dust and calcic minerals inhibited the hydrolysis of CaF_2 and the loss of F^-. Compared with the blast furnace dust from Chengdeng, the blast furnace dusts from Jiugang and Jinxin inhibited the diffusion of F-when used as reducing agents, leading to weaker effects of fluorite.
