Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,a...Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,and 8 wt.%)on the wettability and interfacial reaction between the alloy and shell were investigated by a sessile-drop experiment.The results show that increasing the Al_(2)O_(3) doping contents(0−8 wt.%)reduces the porosity(21.74%−10.08%)and roughness(3.22−1.34μm)of the shell surface.The increase in Cr_(2)O_(3) dopant content(2−8 wt.%)further exacerbates the interfacial reaction,leading to an increase in the thickness of the reaction layer(2.6−3.1μm)and a decrease in the wetting angle(93.9°−91.0°).The addition of Al_(2)O_(3) and TiO_(2) dopants leads to the formation of Al_(2)TiO_(5) composite oxides in the reaction products,which effectively inhibits the interfacial reaction.The increase in TiO_(2) dopant contents(0−8 wt.%)further promotes the formation of Al_(2)TiO_(5),which decreases the thickness of the interfacial reaction layer(3.9−1.2μm)and increases the wetting angle(95.0°−103.8°).The introduced dopants enhance the packing density of the shell surface,while simultaneously suppress the diffusion of active metal elements from the alloy matrix to the interface.展开更多
CAB is a binder commonly utilized in CL-20-based mixed explosives.Based on the requirements of CL-20-based polymer bonded explosives in formability,safety,and detonation energy,we explored a hightoughness and low dosa...CAB is a binder commonly utilized in CL-20-based mixed explosives.Based on the requirements of CL-20-based polymer bonded explosives in formability,safety,and detonation energy,we explored a hightoughness and low dosage CAB binder system.CAB was subjected to different toughening modifications and the effects of the modified CAB binders on the bonding and coating of CL-20 crystals,as well as the formability,safety,and mechanical properties of CL-20-based polymer bonded explosive molding powder(MP)were evaluated.The changes in glass transition temperature(Tg)and mechanical properties of the modified binders were investigated using the molecular dynamics simulation at first.A series of modified binders with different molecular weights were then synthesized and characterized by FTIR,1H NMR,^(13)C NMR and SEC.The T_(g) and cross-sectional morphologies of the binder membranes were determined by DSC and SEM.The tensile properties of the binder membranes with different molecular weights and their mixtures with the plasticizer were evaluated at different temperature.With the optimized modified binder,CL-20/CAB and CL-20/CAB-g-PCL-3 MPs with the same plasticizer ratio and Cl-20/CAB-g-PCL-3 MP with a lower plasticizer ratio and higher CL-20 content were prepared and evaluated for the bonding and coating effects,crystal form,mechanical sensitivity and specific heat capacity(C_(p))by SEM,XRD,sensitivity testing and DSC,respectively.Their compressive strengths and splitting tensile strengths were measured at different temperature using a universal testing machine.Our work has provided a high-toughness and low-dosage binder system for CL-20-based MPs and offers a novel strategy to improve the formability,safety,and energy of CL-20 based polymer bonded explosives.展开更多
Development of polymers with underwater self-healing and antifouling properties is crucial,particularly in harsh marine environments.In this study,polydimethylsiloxane(PDMS)-based antifouling polymers with tunable sel...Development of polymers with underwater self-healing and antifouling properties is crucial,particularly in harsh marine environments.In this study,polydimethylsiloxane(PDMS)-based antifouling polymers with tunable self-healing capabilities in aqueous conditions were fabricated by incorporating amphiphilic segments and Fe^(3+)-catechol dynamic coordination crosslinking.The microphase formed within the PDMS matrix imparted static antifouling properties to the coatings.The mechanical properties of the damaged sample were restored at room temperature in an aqueous environment for 24 h,achieving a self-healing efficiency of almost 100%.The synthesized material exploited the dynamic coordination between Fe^(3+) and catechol to facilitate underwater self-healing.No bacterial adhesion was observed at the scratch site after the coating was repaired.This material enables the long-term antifouling and autonomous repair of marine vessels and sensors,thereby reducing maintenance costs.展开更多
The impact safety of explosive charges has been focused in these decades. The fragment impact is widely used to evaluate the response of explosive charges. In our work, the explosive detonation driving technique was u...The impact safety of explosive charges has been focused in these decades. The fragment impact is widely used to evaluate the response of explosive charges. In our work, the explosive detonation driving technique was used to generate a high velocity fragment with large mass. When the fragment masses are10 g, 16 g, 25 g, and 50 g, the highest velocity of fragments can reach 2400 m/s, 2100 m/s, 1900 m/s, and1400 m/s, respectively. The high velocity fragment with large mass was used to evaluate the safety of two kinds of CL-20 based explosive charges. The effects of the fragment mass and velocity were analyzed.Especially, the reaction extent was obtained based on visible phenomenon. The CL-20-based explosive charge containing Al had a higher safety level than that without Al. It was because Al had good ductility,and further improved the mechanical property of the material. Also, the numerical simulation was conducted to understand the reaction characteristics of the CL-20-based explosive charge. The results showed that as the fragment mass and velocity increased, the reaction became more violent.展开更多
Silicon suboxide(SiO_(x),0<x<2)is an appealing anode material to replace traditional graphite owing to its much higher theoretical specific capacity enabling higher-energy-density lithium batteries.Nevertheless,...Silicon suboxide(SiO_(x),0<x<2)is an appealing anode material to replace traditional graphite owing to its much higher theoretical specific capacity enabling higher-energy-density lithium batteries.Nevertheless,the huge volume change and rapid capacity decay of SiO_(x)electrodes during cycling pose huge challenges to their large-scale practical applications.To eliminate this bottleneck,a dragonfly wing microstructure-inspired polymer electrolyte(denoted as PPM-PE)is developed based on in-situ polymerization of bicyclic phosphate ester-and urethane motif-containing monomer and methyl methacrylate in traditional liquid electrolyte.PPM-PE delivers excellent mechanical properties,highly correlated with the formation of a micro-phase separation structure similar with dragonfly wings.By virtue of superior mechanical properties and the in-situ solidified preparation method,PPM-PE can form a 3D polymer network buffer against stress within the electrode particles gap,enabling much suppressed electrode volume expansion and more stabilized solid electrolyte interface along with evidently decreased electrolyte decomposition.Resultantly,PPM-PE shows significant improvements in both cycling and rate performance in button and soft package batteries with SiO_(x)-based electrodes,compared with the liquid electrolyte counterpart.Such a dragonfly wing microstructure-inspired design philosophy of in-situ solidified polymer electrolytes helps facilitate the practical implementation of high-energy lithium batteries with SiO_(x)-based anodes.展开更多
The new CL-20(hexanitrohexaazaisowurtzitane)type aluminized explosives in the overdrive detonation(ODD)conditions of the core problem is how to accurately represent the state of the overdrive detonation products.To th...The new CL-20(hexanitrohexaazaisowurtzitane)type aluminized explosives in the overdrive detonation(ODD)conditions of the core problem is how to accurately represent the state of the overdrive detonation products.To this end,this paper is based on the impedance matching method to test the ODD conditions of CL-20 type aluminium explosive particle velocity.Calculated the interfacial pressure of the shock wave in different media.Determined the characteristic parameters of the reaction zone of the detonation of CL-20 aluminized explosives.Calibrated the parameters of the JoneseWilkinseLee(JWL)+γ equation for the detonation products(DPs).Revealed the effect of different DPs equation of state(EOS)on the Hugoniot pressure of ODD.The results indicate that when the content of aluminum powder ranges from 0%to 30%,the duration of the ODD reaction zone and the width of the detonation reaction zone of the CL-20-based aluminized explosive are directly proportional to the content of aluminum powder.The width of the detonation reaction zone is increased by 1.97 times to 2.7 times compared to that of the reaction zone without the addition of aluminum powder.However,the energy release efficiency of the detonation reaction zone is inversely proportional to the content of aluminum powder.When the aluminum powder content was held constant,the incorporation of AP caused a 25%reduction in the energy release efficiency of the detonation reaction zone.Compared with existing ODD state equations,the JWL +γ equation is superior in calibrating overpressure Hugoniot data and the isentropic expansion in the C-J state.The deviation between calculated pressure results and experimental measurements is within 6%.展开更多
Dear Editor,Thyroid-associated ophthalmopathy(TAO),or Graves’ophthalmopathy(GO),is a complex autoimmune condition characterized by eye symptoms such as proptosis,lid retraction,and periorbital swelling,often associat...Dear Editor,Thyroid-associated ophthalmopathy(TAO),or Graves’ophthalmopathy(GO),is a complex autoimmune condition characterized by eye symptoms such as proptosis,lid retraction,and periorbital swelling,often associated with thyroid dysfunction[1].Current drug treatments primarily include glucocorticoids,traditional immunosuppressants,and novel biologics such as Teprotumumab.While able to alleviate symptoms,they often do not adequately address irreversible conditions such as visual impairment and fi brosis,and it is diffi cult to avoid long-term medication side eff ects.In this context,exploring new therapeutic avenues for TAO to improve patients’prognosis and quality of life is meaningful.We proposed chimeric antigen receptor(CAR)-based therapy as a novel treatment orientation.展开更多
A unique discontinuous lamellar microstructure of titanium alloys consisting of lamellar colonies at prior β-Ti grain boundaries and internal interwoven α-laths is prepared by a TiH_(2)-based powder metallurgy metho...A unique discontinuous lamellar microstructure of titanium alloys consisting of lamellar colonies at prior β-Ti grain boundaries and internal interwoven α-laths is prepared by a TiH_(2)-based powder metallurgy method.The α-variants get various crystallographic orientations and become discontinuous during vacuum annealing at 700℃.Remarkably,nanoscale phase δ-TiH compound layers are generated between α-laths and β-strips,so that dislocations are piled up at the α/δ/βinterfaces during tensile deformation.This leads to dislocation slips being confined to individual α-laths,with differentslips and particularly pyramidal<c+a>slips being activated.The efficiency of wavy slip is promoted and the work hardening rate is enhanced.Finally,the combined effect of dispersed micro-shear bands and lath distortions is considered contributive for alleviating the stress concentration at grain boundaries,resulting in a high-promising synergy of enhanced ultimate tensile strength of 1080 MPa and good elongation to fracture of 13.6%.展开更多
Al_(2)O_(3)-based eutectic ceramics are considered as promising candidates for ultra-high-temperature structural materials due to their exceptional thermal stability and mechanical properties.Nonetheless,several chall...Al_(2)O_(3)-based eutectic ceramics are considered as promising candidates for ultra-high-temperature structural materials due to their exceptional thermal stability and mechanical properties.Nonetheless,several challenges must be overcome before they can be widely used.This paper reviews in detail the tailoring of microstructure from the aspect of process parameters,the updated knowledge gained in microstructure(crystallographic orientation,high-resolution interfacial structures)and the latest means of optimizing eutectic microstructure(seed-induced method,introducing low-energy grain boundaries and high-entropy phase).Additionally,the paper explores future techniques for the fabrication of bulk ceramic materials and effective toughening approaches.This review highlights the achievements made especially in the last 15 years,current limitations in Al_(2)O_(3)-based eutectic ceramics,and offers comprehensive insights and strategic guidance for further mechanical breakthroughs.展开更多
Catalytic activity and hydrothermal stability are both crucial for the application of the selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR)catalyst in diesel vehicles.In this study,a tin(Sn)-modified Ce-N...Catalytic activity and hydrothermal stability are both crucial for the application of the selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR)catalyst in diesel vehicles.In this study,a tin(Sn)-modified Ce-Nb mixed-oxide catalyst was synthesized as an NH_(3)-SCR catalyst for NO_(x)emission control.After the intro-duction of Sn,both the NH_(3)-SCR activity and the hydrothermal stability of the catalyst were remarkably promoted.Even after hydrothermal aging at 1000℃,the developed Ce_(1)Sn_(2)Nb_(1)O_(x)catalyst achieved more than 90%NO_(x)conversion at 325-500℃.Various methods,including N2-physisorption,X-ray diffraction,in-situ high-temperature X-ray diffraction,high-resolution transmission electron microscopy,X-ray pho-toelectron spectroscopy,X-ray absorption fine-structure spectroscopy,temperature-programmed reduc-tion of hydrogen,temperature-programmed desorption of ammonia,and density functional theory calculations were used to investigate the promotional effects induced by the Sn species.The characteri-zation results showed that the addition of Sn not only promoted the formation of the Ce-Nb active phase but also improved its thermal stability,contributing to the excellent NH_(3)-SCR performance and hydrothermal stability.This study provides an excellent sintering-resistance catalyst for the application of diesel engine NO_(x)emission control.展开更多
To explore high value-added utilization pathways of fly ash,the mesoporous structure of silicon dioxide extracted from fly ash(FA-SiO_(2))was utilized to restrict the dicyandiamide(DCDA)thermal degradation process.Thi...To explore high value-added utilization pathways of fly ash,the mesoporous structure of silicon dioxide extracted from fly ash(FA-SiO_(2))was utilized to restrict the dicyandiamide(DCDA)thermal degradation process.This produced chemically bonded interacting composite photocatalysts of FA-SiO,and graphitic-phase carbon nitride(g-C_(3)N_(4)).Compared with the spherical silicon dioxide prepared using tetraethyl orthosilicate(TEOS-SiO_(2)),the mesoporous structure of FA-SiO_(2),allowed DCDA to react in a smaller space,which facilitated the transformation of DCDA to melamine by the thermal degradation kinetics of FA-C_(3)N_(4)/DCDA.This ultimately boosted the formation of an N-atom-removed triazine ring structure and a multistage structure combining lumps and rods in the composite photocatalysts of g-C_(3)N_(4),and FA-SiO_(2),which led to a higher visible-light utilization efficiency,a suitable valence-band position,and the photocatalytic activity for methylene blue reaching 3.56 times that of g-C_(3)N_(4).The findings indicate that mesoporous FA-SiO,has the potential to improve the structural and photocatalytic properties of g-C_(3)N_(4),-based materials.展开更多
Neuromorphic computing devices leveraging HfO_(2) and ZrO_(2) materials have recently garnered significant attention due to their potential for brain-inspired computing systems.In this study,we present a novel trilaye...Neuromorphic computing devices leveraging HfO_(2) and ZrO_(2) materials have recently garnered significant attention due to their potential for brain-inspired computing systems.In this study,we present a novel trilayer Pt/HfO_(2)/ZrO_(2-x)/HfO_(2)/TiN memristor,engineered with a ZrO_(2-x) oxygen vacancy reservoir(OVR)layer fabricated via radio frequency(RF)sputtering under controlled oxygen ambient.The incorporation of the ZrO_(2-x) OVR layer enables enhanced resistive switching characteristics,including a high ON/OFF ratio(∼8000),excellent uniformity,robust data retention(>105 s),and multilevel storage capabilities.Furthermore,the memristor demonstrates superior synaptic plasticity with linear long-term potentiation(LTP)and depression(LTD),achieving low non-linearity values of 1.36(LTP)and 0.66(LTD),and a recognition accuracy of 95.3%in an MNIST dataset simulation.The unique properties of the ZrO_(2-x) layer,particularly its ability to act as a dynamic oxygen vacancy reservoir,significantly enhance synaptic performance by stabilizing oxygen vacancy migration.These findings establish the OVR-trilayer memristor as a promising candidate for future neuromorphic computing and high-performance memory applications.展开更多
The reaction behavior between CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags and La-bearing FeCrAl melt was quantitatively characterized,which was further compared with the reaction behavior of CaO–SiO_(2)-based slags.Bas...The reaction behavior between CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags and La-bearing FeCrAl melt was quantitatively characterized,which was further compared with the reaction behavior of CaO–SiO_(2)-based slags.Based on this,the new type of mold flux for La-bearing FeCrAl alloy continuous casting was designed and its basic properties were evaluated.The results showed that the order of reaction degree of fluxing agents in CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags is(Na_(2)O)>(B_(2)O_(3))>(Li_(2)O),and the percentages of mass change of fluxing agents were 85.8,54.29 and 42.35 wt.%,respectively.Moreover,the addition of(Li_(2)O)and(Na_(2)O)promoted the reaction between(CaO)and[Al],and the reaction degree of the former was weaker than that of the latter,which was due to the greater effect of(Na_(2)O)on the activity of(CaO)and(Al_(2)O_(3))than(Li_(2)O).Compared with the reactivity of CaO–SiO_(2)-based slags,the percentages of mass change of Al and La caused by slag–steel reaction decreased by 10.63–14.36 and 39.78–50.49 wt.%,respectively.The percentages of mass change of(Al_(2)O_(3)),(La_(2)O_(3))and(CaO)in slags highest increased by 17.71,17.98,and 7.81 wt.%,respectively.The reactivity of CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags was significantly weakened.Ultimately,the new type of mold flux was designed and the composition range was determined.The fundamental properties of new mold flux basically meet the theoretical requirements for La-bearing FeCrAl alloy continuous casting.展开更多
The syntheses of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials have been reported and these materials have been developed as excellent MRI contrast agents.Due to the close interrelation between their morphology and pro...The syntheses of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials have been reported and these materials have been developed as excellent MRI contrast agents.Due to the close interrelation between their morphology and properties,it has resulted in the development of various particle sizes and shapes of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials.This has led to the extension of the uses of the materials to photocatalysis,drug delivery,and CT image contrast agents.Accordingly,these applications have been compiled and discussed in depth in this review.The potential of these materials in the above applications has started to attract significant attention.Moreover,the compilation of in-vitro toxicity studies from the literature was also discussed to facilitate the biocompatibility of the developed Gd(OH)_(3)nanomaterials.However,despite the rapid progress of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials,there are still knowledge gaps in certain areas.Therefore,this review provides insights into the recent development of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials to aid in accelerating novel developments.展开更多
Effects of VC/Cr3C2 on the microstructure and mechanical properties of Ti（C,N）-based cermets were studied. The microstructure was investigated by means of optical microscopy, X-ray diffractometry as well as scanning...Effects of VC/Cr3C2 on the microstructure and mechanical properties of Ti（C,N）-based cermets were studied. The microstructure was investigated by means of optical microscopy, X-ray diffractometry as well as scanning electron microscopy in combination with energy dispersive spectrometry. Mechanical properties, such as transverse rupture strength, hardness and fracture toughness, were measured. The results show that there are black core-grey rim structure and white core-grey rim structure in the microstructure. The grains become fine due to the VC/Cr3C2, and the grains of cermet added with 0.75VC/0.25Cr3C2 are refined most remarkably. The black core becomes finer with the increase of VC addition and rim phase becomes thicker with the decrease of Cr3C2 addition. The porosity increases with the increase of VC addition in VC/Cr3C2. Compared with the cermet free of VC/Cr3C2, the transverse rupture strength and hardness of cermets with VC/Cr3C2 are both improved, and the maximum values are both found for the cermet with 0.25VC/0.75Cr3C2. The fracture toughness can be effectively promoted by adding VC/Cr3C2 with an appropriate ratio of VC to Cr3C2, and the maximum value is found for the cermet with 0.5VC/0.5Cr3C2.展开更多
Ag3PO4 is found to be a highly efficient photocatalyst and receives great attention. The high activity of the photocatalyst is credited to the intrinsic electronic structure. The morphology control and nano-composite ...Ag3PO4 is found to be a highly efficient photocatalyst and receives great attention. The high activity of the photocatalyst is credited to the intrinsic electronic structure. The morphology control and nano-composite fabrication are used to improve the performance and practicability. This paper reviews the structure, properties and some theoretical aspects of Ag3PO4 single crystal. Also, the major strategies, namely the morphology control and hetero-nanostructure construction, as ways to improve the performance of Ag3PO4-based photocatalysts, are summarized with the aid of some typical instances.展开更多
Bulk metallic glass（BMG） rods Fe71Mo5-xNbxP12C10B2（x=1,2,3,4 and 5） with diameter of 1 or 2 mm were synthesized by copper mold casting.The effects of Nb substitution for Mo on the structure,thermal and mechanical ...Bulk metallic glass（BMG） rods Fe71Mo5-xNbxP12C10B2（x=1,2,3,4 and 5） with diameter of 1 or 2 mm were synthesized by copper mold casting.The effects of Nb substitution for Mo on the structure,thermal and mechanical properties of Fe71Mo5-xNbxP12C10B2 alloys were studied by X-ray diffraction,differential scanning calorimetry and compressive testing.The results show that the substitution of Nb for Mo leads to a decreased glass forming ability,but with plasticity of 1.0%,the fracture strength of Fe71Mo2Nb3P12C10B2 alloy increases up to 4.0 GPa.The improvement of the fracture strength is discussed in terms of the enhancement of atomic bonding nature and the favorite formation of a network-like structure due to the substitution of Nb for Mo.展开更多
A novel SnO2-based gas anode was developed for aluminum electrolysis in molten cryolite at 850 ＆#176;C to reduce energy consumption and decrease CO2 emissions. Hydrogen was introduced into the anode, participating in...A novel SnO2-based gas anode was developed for aluminum electrolysis in molten cryolite at 850 ＆#176;C to reduce energy consumption and decrease CO2 emissions. Hydrogen was introduced into the anode, participating in the anode reaction. Carbon and aluminum were used as the cathode and reference electrodes, respectively. Cyclic voltammetry was applied in the cell to investigate the electrochemical behavior of oxygen ion on platinum and SnO2-based materials. The potential for oxygen evolution on these electrode materials was determined. Then, galvanostatic electrolysis was performed on the gas anode, showing a significant depolarization effect （a decrease of ~0.8 V of the anode potential） after the introduction of hydrogen, compared with no gas introduction or the introduction of argon. The results indicate the involvement of hydrogen in the anode reaction （three-phase-boundary reaction including gas, electrolyte and electrode） and give the possibility for the utilization of reducing gas anodes for aluminum electrolysis.展开更多
AIM:To examine whether administration of lentinan,purifiedβ-1,3-glucan,can prolong survival in advanced gastric cancer patients receiving S-1-based chemotherapy.METHODS:Since 2004,78 patients with metastatic or recur...AIM:To examine whether administration of lentinan,purifiedβ-1,3-glucan,can prolong survival in advanced gastric cancer patients receiving S-1-based chemotherapy.METHODS:Since 2004,78 patients with metastatic or recurrent gastric cancer have received S-1-based chemotherapy as first-line treatment.Survival,side effects,and the ratio of granulocytes/lymphocytes(G/L ratio)were compared between 2 groups of patients who received chemo-immunotherapy using lentinan and chemotherapy alone.RESULTS:Median overall survival was significantly longer in the former group than in the latter group[689 d(95%CI:431-2339 d)vs 565 d(95%CI:323-662 d),P=0.0406].In addition,the G/L ratio in patients who received lentinan was maintained around or below 2,which was significantly lower than that in patients who received chemotherapy alone(P<0.001).CONCLUSION:Chemo-immunotherapy with lentinan offers a significant advantage over S-1-based chemotherapy alone in terms of survival in patients with advanced gastric cancer.展开更多
基金supported by the National Natural Science Foundation of China (No. 52374292)China Baowu Low Carbon Metallurgy Innovation Foundation, China (No. BWLCF202309)the Natural Science Foundation of Changsha City, China (No. KQ2208271)。
文摘Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,and 8 wt.%)on the wettability and interfacial reaction between the alloy and shell were investigated by a sessile-drop experiment.The results show that increasing the Al_(2)O_(3) doping contents(0−8 wt.%)reduces the porosity(21.74%−10.08%)and roughness(3.22−1.34μm)of the shell surface.The increase in Cr_(2)O_(3) dopant content(2−8 wt.%)further exacerbates the interfacial reaction,leading to an increase in the thickness of the reaction layer(2.6−3.1μm)and a decrease in the wetting angle(93.9°−91.0°).The addition of Al_(2)O_(3) and TiO_(2) dopants leads to the formation of Al_(2)TiO_(5) composite oxides in the reaction products,which effectively inhibits the interfacial reaction.The increase in TiO_(2) dopant contents(0−8 wt.%)further promotes the formation of Al_(2)TiO_(5),which decreases the thickness of the interfacial reaction layer(3.9−1.2μm)and increases the wetting angle(95.0°−103.8°).The introduced dopants enhance the packing density of the shell surface,while simultaneously suppress the diffusion of active metal elements from the alloy matrix to the interface.
基金supported by"the Fundamental Research Funds for the Central Universities".
文摘CAB is a binder commonly utilized in CL-20-based mixed explosives.Based on the requirements of CL-20-based polymer bonded explosives in formability,safety,and detonation energy,we explored a hightoughness and low dosage CAB binder system.CAB was subjected to different toughening modifications and the effects of the modified CAB binders on the bonding and coating of CL-20 crystals,as well as the formability,safety,and mechanical properties of CL-20-based polymer bonded explosive molding powder(MP)were evaluated.The changes in glass transition temperature(Tg)and mechanical properties of the modified binders were investigated using the molecular dynamics simulation at first.A series of modified binders with different molecular weights were then synthesized and characterized by FTIR,1H NMR,^(13)C NMR and SEC.The T_(g) and cross-sectional morphologies of the binder membranes were determined by DSC and SEM.The tensile properties of the binder membranes with different molecular weights and their mixtures with the plasticizer were evaluated at different temperature.With the optimized modified binder,CL-20/CAB and CL-20/CAB-g-PCL-3 MPs with the same plasticizer ratio and Cl-20/CAB-g-PCL-3 MP with a lower plasticizer ratio and higher CL-20 content were prepared and evaluated for the bonding and coating effects,crystal form,mechanical sensitivity and specific heat capacity(C_(p))by SEM,XRD,sensitivity testing and DSC,respectively.Their compressive strengths and splitting tensile strengths were measured at different temperature using a universal testing machine.Our work has provided a high-toughness and low-dosage binder system for CL-20-based MPs and offers a novel strategy to improve the formability,safety,and energy of CL-20 based polymer bonded explosives.
基金supported by Beijing Municipal Natural Science Foundation(No.2242053)National Natural Science Foundation of China(No.22275012).
文摘Development of polymers with underwater self-healing and antifouling properties is crucial,particularly in harsh marine environments.In this study,polydimethylsiloxane(PDMS)-based antifouling polymers with tunable self-healing capabilities in aqueous conditions were fabricated by incorporating amphiphilic segments and Fe^(3+)-catechol dynamic coordination crosslinking.The microphase formed within the PDMS matrix imparted static antifouling properties to the coatings.The mechanical properties of the damaged sample were restored at room temperature in an aqueous environment for 24 h,achieving a self-healing efficiency of almost 100%.The synthesized material exploited the dynamic coordination between Fe^(3+) and catechol to facilitate underwater self-healing.No bacterial adhesion was observed at the scratch site after the coating was repaired.This material enables the long-term antifouling and autonomous repair of marine vessels and sensors,thereby reducing maintenance costs.
文摘The impact safety of explosive charges has been focused in these decades. The fragment impact is widely used to evaluate the response of explosive charges. In our work, the explosive detonation driving technique was used to generate a high velocity fragment with large mass. When the fragment masses are10 g, 16 g, 25 g, and 50 g, the highest velocity of fragments can reach 2400 m/s, 2100 m/s, 1900 m/s, and1400 m/s, respectively. The high velocity fragment with large mass was used to evaluate the safety of two kinds of CL-20 based explosive charges. The effects of the fragment mass and velocity were analyzed.Especially, the reaction extent was obtained based on visible phenomenon. The CL-20-based explosive charge containing Al had a higher safety level than that without Al. It was because Al had good ductility,and further improved the mechanical property of the material. Also, the numerical simulation was conducted to understand the reaction characteristics of the CL-20-based explosive charge. The results showed that as the fragment mass and velocity increased, the reaction became more violent.
基金financially supported by the National Key R&D Program of China(2023YFC2812700)the Key Scientific and Technological Innovation Project of Shandong(2022CXGC020301)+6 种基金the National Natural Science Foundation of China(22279153,U22A2044,22479154,52303287)the Taishan Scholars of Shandong Province(No.ts201511063)the Shandong Energy Institute(Grant No.SEI I202108)the Postdoctoral Fellowship Program of CPSF(E31Z3F04)China Postdoctoral Science Foundation(2024 M753350)the Natural Science Foundation of Shandong Province(ZR2023QB208)Qingdao Natural Science Foundation(23-2-1-77-zyyd-jch)。
文摘Silicon suboxide(SiO_(x),0<x<2)is an appealing anode material to replace traditional graphite owing to its much higher theoretical specific capacity enabling higher-energy-density lithium batteries.Nevertheless,the huge volume change and rapid capacity decay of SiO_(x)electrodes during cycling pose huge challenges to their large-scale practical applications.To eliminate this bottleneck,a dragonfly wing microstructure-inspired polymer electrolyte(denoted as PPM-PE)is developed based on in-situ polymerization of bicyclic phosphate ester-and urethane motif-containing monomer and methyl methacrylate in traditional liquid electrolyte.PPM-PE delivers excellent mechanical properties,highly correlated with the formation of a micro-phase separation structure similar with dragonfly wings.By virtue of superior mechanical properties and the in-situ solidified preparation method,PPM-PE can form a 3D polymer network buffer against stress within the electrode particles gap,enabling much suppressed electrode volume expansion and more stabilized solid electrolyte interface along with evidently decreased electrolyte decomposition.Resultantly,PPM-PE shows significant improvements in both cycling and rate performance in button and soft package batteries with SiO_(x)-based electrodes,compared with the liquid electrolyte counterpart.Such a dragonfly wing microstructure-inspired design philosophy of in-situ solidified polymer electrolytes helps facilitate the practical implementation of high-energy lithium batteries with SiO_(x)-based anodes.
基金supported by the National Natural Science Foundation of China(NSFC,Grant Nos.11872120,12102050)Key Laboratory of Explosion Science and Technology(Grant No.QNKT22-01).
文摘The new CL-20(hexanitrohexaazaisowurtzitane)type aluminized explosives in the overdrive detonation(ODD)conditions of the core problem is how to accurately represent the state of the overdrive detonation products.To this end,this paper is based on the impedance matching method to test the ODD conditions of CL-20 type aluminium explosive particle velocity.Calculated the interfacial pressure of the shock wave in different media.Determined the characteristic parameters of the reaction zone of the detonation of CL-20 aluminized explosives.Calibrated the parameters of the JoneseWilkinseLee(JWL)+γ equation for the detonation products(DPs).Revealed the effect of different DPs equation of state(EOS)on the Hugoniot pressure of ODD.The results indicate that when the content of aluminum powder ranges from 0%to 30%,the duration of the ODD reaction zone and the width of the detonation reaction zone of the CL-20-based aluminized explosive are directly proportional to the content of aluminum powder.The width of the detonation reaction zone is increased by 1.97 times to 2.7 times compared to that of the reaction zone without the addition of aluminum powder.However,the energy release efficiency of the detonation reaction zone is inversely proportional to the content of aluminum powder.When the aluminum powder content was held constant,the incorporation of AP caused a 25%reduction in the energy release efficiency of the detonation reaction zone.Compared with existing ODD state equations,the JWL +γ equation is superior in calibrating overpressure Hugoniot data and the isentropic expansion in the C-J state.The deviation between calculated pressure results and experimental measurements is within 6%.
基金supported by the Distinguished Young Scholars of the National Defense Biotechnology Foundation(01-SWKJYCJJ11).
文摘Dear Editor,Thyroid-associated ophthalmopathy(TAO),or Graves’ophthalmopathy(GO),is a complex autoimmune condition characterized by eye symptoms such as proptosis,lid retraction,and periorbital swelling,often associated with thyroid dysfunction[1].Current drug treatments primarily include glucocorticoids,traditional immunosuppressants,and novel biologics such as Teprotumumab.While able to alleviate symptoms,they often do not adequately address irreversible conditions such as visual impairment and fi brosis,and it is diffi cult to avoid long-term medication side eff ects.In this context,exploring new therapeutic avenues for TAO to improve patients’prognosis and quality of life is meaningful.We proposed chimeric antigen receptor(CAR)-based therapy as a novel treatment orientation.
基金financially supported by the National Natural Science Foundation of China(Nos.52301145,52275329)the Applied Basic Research Program of Liaoning Province,China(No.2023JH2/101300158)+1 种基金the Fundamental Research Fund for the Central Universities,China(No.N2202010)the Key Research Programs of High Education Institutions in Henan Province,China(No.24A430017).
文摘A unique discontinuous lamellar microstructure of titanium alloys consisting of lamellar colonies at prior β-Ti grain boundaries and internal interwoven α-laths is prepared by a TiH_(2)-based powder metallurgy method.The α-variants get various crystallographic orientations and become discontinuous during vacuum annealing at 700℃.Remarkably,nanoscale phase δ-TiH compound layers are generated between α-laths and β-strips,so that dislocations are piled up at the α/δ/βinterfaces during tensile deformation.This leads to dislocation slips being confined to individual α-laths,with differentslips and particularly pyramidal<c+a>slips being activated.The efficiency of wavy slip is promoted and the work hardening rate is enhanced.Finally,the combined effect of dispersed micro-shear bands and lath distortions is considered contributive for alleviating the stress concentration at grain boundaries,resulting in a high-promising synergy of enhanced ultimate tensile strength of 1080 MPa and good elongation to fracture of 13.6%.
基金financially supported by the National Natural Science Foundation of China(No.52171046)National Natural Science Foundation of China-key programme(No.52234010)the Fundamental Research Funds for the Central Universities and Shaanxi Provincial Key Science and Technology Innovation Team(No.2023-CX-TD-14).
文摘Al_(2)O_(3)-based eutectic ceramics are considered as promising candidates for ultra-high-temperature structural materials due to their exceptional thermal stability and mechanical properties.Nonetheless,several challenges must be overcome before they can be widely used.This paper reviews in detail the tailoring of microstructure from the aspect of process parameters,the updated knowledge gained in microstructure(crystallographic orientation,high-resolution interfacial structures)and the latest means of optimizing eutectic microstructure(seed-induced method,introducing low-energy grain boundaries and high-entropy phase).Additionally,the paper explores future techniques for the fabrication of bulk ceramic materials and effective toughening approaches.This review highlights the achievements made especially in the last 15 years,current limitations in Al_(2)O_(3)-based eutectic ceramics,and offers comprehensive insights and strategic guidance for further mechanical breakthroughs.
基金supported by the National Natural Science Foundation of China(52225004 and 22276202)the National Key Research and Development Program of China(2022YFC3701804)the Youth Innovation Promotion Association of Chinese Academy of Sciences(2019045).
文摘Catalytic activity and hydrothermal stability are both crucial for the application of the selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR)catalyst in diesel vehicles.In this study,a tin(Sn)-modified Ce-Nb mixed-oxide catalyst was synthesized as an NH_(3)-SCR catalyst for NO_(x)emission control.After the intro-duction of Sn,both the NH_(3)-SCR activity and the hydrothermal stability of the catalyst were remarkably promoted.Even after hydrothermal aging at 1000℃,the developed Ce_(1)Sn_(2)Nb_(1)O_(x)catalyst achieved more than 90%NO_(x)conversion at 325-500℃.Various methods,including N2-physisorption,X-ray diffraction,in-situ high-temperature X-ray diffraction,high-resolution transmission electron microscopy,X-ray pho-toelectron spectroscopy,X-ray absorption fine-structure spectroscopy,temperature-programmed reduc-tion of hydrogen,temperature-programmed desorption of ammonia,and density functional theory calculations were used to investigate the promotional effects induced by the Sn species.The characteri-zation results showed that the addition of Sn not only promoted the formation of the Ce-Nb active phase but also improved its thermal stability,contributing to the excellent NH_(3)-SCR performance and hydrothermal stability.This study provides an excellent sintering-resistance catalyst for the application of diesel engine NO_(x)emission control.
基金supported by the Medical Special Cultivation Project of Anhui University of Science and Technology(Nos.YZ2023H2B013 and YZ2023H2B012),China.
文摘To explore high value-added utilization pathways of fly ash,the mesoporous structure of silicon dioxide extracted from fly ash(FA-SiO_(2))was utilized to restrict the dicyandiamide(DCDA)thermal degradation process.This produced chemically bonded interacting composite photocatalysts of FA-SiO,and graphitic-phase carbon nitride(g-C_(3)N_(4)).Compared with the spherical silicon dioxide prepared using tetraethyl orthosilicate(TEOS-SiO_(2)),the mesoporous structure of FA-SiO_(2),allowed DCDA to react in a smaller space,which facilitated the transformation of DCDA to melamine by the thermal degradation kinetics of FA-C_(3)N_(4)/DCDA.This ultimately boosted the formation of an N-atom-removed triazine ring structure and a multistage structure combining lumps and rods in the composite photocatalysts of g-C_(3)N_(4),and FA-SiO_(2),which led to a higher visible-light utilization efficiency,a suitable valence-band position,and the photocatalytic activity for methylene blue reaching 3.56 times that of g-C_(3)N_(4).The findings indicate that mesoporous FA-SiO,has the potential to improve the structural and photocatalytic properties of g-C_(3)N_(4),-based materials.
基金financially supported by the National Research Foundation of Korea(no.NRF-2021R1A2C2010781)grant funded by the Korean Government(Ministry of Science and ICT)Korea Institute for Advancement of Technology(KIAT)grant funded by the Korea Government(MOTIE)(no.P0012451,The Competency Development Program for Industry Specialist)Korea Government(MOTIE)(no.P0020966,HRD Program for Industrial Innovation).
文摘Neuromorphic computing devices leveraging HfO_(2) and ZrO_(2) materials have recently garnered significant attention due to their potential for brain-inspired computing systems.In this study,we present a novel trilayer Pt/HfO_(2)/ZrO_(2-x)/HfO_(2)/TiN memristor,engineered with a ZrO_(2-x) oxygen vacancy reservoir(OVR)layer fabricated via radio frequency(RF)sputtering under controlled oxygen ambient.The incorporation of the ZrO_(2-x) OVR layer enables enhanced resistive switching characteristics,including a high ON/OFF ratio(∼8000),excellent uniformity,robust data retention(>105 s),and multilevel storage capabilities.Furthermore,the memristor demonstrates superior synaptic plasticity with linear long-term potentiation(LTP)and depression(LTD),achieving low non-linearity values of 1.36(LTP)and 0.66(LTD),and a recognition accuracy of 95.3%in an MNIST dataset simulation.The unique properties of the ZrO_(2-x) layer,particularly its ability to act as a dynamic oxygen vacancy reservoir,significantly enhance synaptic performance by stabilizing oxygen vacancy migration.These findings establish the OVR-trilayer memristor as a promising candidate for future neuromorphic computing and high-performance memory applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.52174321,52274339 and 52074186).
文摘The reaction behavior between CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags and La-bearing FeCrAl melt was quantitatively characterized,which was further compared with the reaction behavior of CaO–SiO_(2)-based slags.Based on this,the new type of mold flux for La-bearing FeCrAl alloy continuous casting was designed and its basic properties were evaluated.The results showed that the order of reaction degree of fluxing agents in CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags is(Na_(2)O)>(B_(2)O_(3))>(Li_(2)O),and the percentages of mass change of fluxing agents were 85.8,54.29 and 42.35 wt.%,respectively.Moreover,the addition of(Li_(2)O)and(Na_(2)O)promoted the reaction between(CaO)and[Al],and the reaction degree of the former was weaker than that of the latter,which was due to the greater effect of(Na_(2)O)on the activity of(CaO)and(Al_(2)O_(3))than(Li_(2)O).Compared with the reactivity of CaO–SiO_(2)-based slags,the percentages of mass change of Al and La caused by slag–steel reaction decreased by 10.63–14.36 and 39.78–50.49 wt.%,respectively.The percentages of mass change of(Al_(2)O_(3)),(La_(2)O_(3))and(CaO)in slags highest increased by 17.71,17.98,and 7.81 wt.%,respectively.The reactivity of CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags was significantly weakened.Ultimately,the new type of mold flux was designed and the composition range was determined.The fundamental properties of new mold flux basically meet the theoretical requirements for La-bearing FeCrAl alloy continuous casting.
基金the FRC grant(UBD/RSCH/1.4/FICBF(b)/2023/059)received from Universiti Brunei Darussalam,Brunei Darussalam。
文摘The syntheses of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials have been reported and these materials have been developed as excellent MRI contrast agents.Due to the close interrelation between their morphology and properties,it has resulted in the development of various particle sizes and shapes of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials.This has led to the extension of the uses of the materials to photocatalysis,drug delivery,and CT image contrast agents.Accordingly,these applications have been compiled and discussed in depth in this review.The potential of these materials in the above applications has started to attract significant attention.Moreover,the compilation of in-vitro toxicity studies from the literature was also discussed to facilitate the biocompatibility of the developed Gd(OH)_(3)nanomaterials.However,despite the rapid progress of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials,there are still knowledge gaps in certain areas.Therefore,this review provides insights into the recent development of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials to aid in accelerating novel developments.
基金Project (090414185) supported by the Natural Science Foundation of Anhui Province, China
文摘Effects of VC/Cr3C2 on the microstructure and mechanical properties of Ti（C,N）-based cermets were studied. The microstructure was investigated by means of optical microscopy, X-ray diffractometry as well as scanning electron microscopy in combination with energy dispersive spectrometry. Mechanical properties, such as transverse rupture strength, hardness and fracture toughness, were measured. The results show that there are black core-grey rim structure and white core-grey rim structure in the microstructure. The grains become fine due to the VC/Cr3C2, and the grains of cermet added with 0.75VC/0.25Cr3C2 are refined most remarkably. The black core becomes finer with the increase of VC addition and rim phase becomes thicker with the decrease of Cr3C2 addition. The porosity increases with the increase of VC addition in VC/Cr3C2. Compared with the cermet free of VC/Cr3C2, the transverse rupture strength and hardness of cermets with VC/Cr3C2 are both improved, and the maximum values are both found for the cermet with 0.25VC/0.75Cr3C2. The fracture toughness can be effectively promoted by adding VC/Cr3C2 with an appropriate ratio of VC to Cr3C2, and the maximum value is found for the cermet with 0.5VC/0.5Cr3C2.
文摘Ag3PO4 is found to be a highly efficient photocatalyst and receives great attention. The high activity of the photocatalyst is credited to the intrinsic electronic structure. The morphology control and nano-composite fabrication are used to improve the performance and practicability. This paper reviews the structure, properties and some theoretical aspects of Ag3PO4 single crystal. Also, the major strategies, namely the morphology control and hetero-nanostructure construction, as ways to improve the performance of Ag3PO4-based photocatalysts, are summarized with the aid of some typical instances.
基金Project (SWU110046) supported by the Doctorate Foundation of Southwest University,China
文摘Bulk metallic glass（BMG） rods Fe71Mo5-xNbxP12C10B2（x=1,2,3,4 and 5） with diameter of 1 or 2 mm were synthesized by copper mold casting.The effects of Nb substitution for Mo on the structure,thermal and mechanical properties of Fe71Mo5-xNbxP12C10B2 alloys were studied by X-ray diffraction,differential scanning calorimetry and compressive testing.The results show that the substitution of Nb for Mo leads to a decreased glass forming ability,but with plasticity of 1.0%,the fracture strength of Fe71Mo2Nb3P12C10B2 alloy increases up to 4.0 GPa.The improvement of the fracture strength is discussed in terms of the enhancement of atomic bonding nature and the favorite formation of a network-like structure due to the substitution of Nb for Mo.
基金Project(51404001)supported by the National Natural Science Foundation of ChinaProject([2014]1685)supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education,China
文摘A novel SnO2-based gas anode was developed for aluminum electrolysis in molten cryolite at 850 ＆#176;C to reduce energy consumption and decrease CO2 emissions. Hydrogen was introduced into the anode, participating in the anode reaction. Carbon and aluminum were used as the cathode and reference electrodes, respectively. Cyclic voltammetry was applied in the cell to investigate the electrochemical behavior of oxygen ion on platinum and SnO2-based materials. The potential for oxygen evolution on these electrode materials was determined. Then, galvanostatic electrolysis was performed on the gas anode, showing a significant depolarization effect （a decrease of ~0.8 V of the anode potential） after the introduction of hydrogen, compared with no gas introduction or the introduction of argon. The results indicate the involvement of hydrogen in the anode reaction （three-phase-boundary reaction including gas, electrolyte and electrode） and give the possibility for the utilization of reducing gas anodes for aluminum electrolysis.
文摘AIM:To examine whether administration of lentinan,purifiedβ-1,3-glucan,can prolong survival in advanced gastric cancer patients receiving S-1-based chemotherapy.METHODS:Since 2004,78 patients with metastatic or recurrent gastric cancer have received S-1-based chemotherapy as first-line treatment.Survival,side effects,and the ratio of granulocytes/lymphocytes(G/L ratio)were compared between 2 groups of patients who received chemo-immunotherapy using lentinan and chemotherapy alone.RESULTS:Median overall survival was significantly longer in the former group than in the latter group[689 d(95%CI:431-2339 d)vs 565 d(95%CI:323-662 d),P=0.0406].In addition,the G/L ratio in patients who received lentinan was maintained around or below 2,which was significantly lower than that in patients who received chemotherapy alone(P<0.001).CONCLUSION:Chemo-immunotherapy with lentinan offers a significant advantage over S-1-based chemotherapy alone in terms of survival in patients with advanced gastric cancer.
