An alternative elliptical and circle air-hole-assisted Al_(0.24)Ga_(0.76)As photonic crystal fiber(PCF)was proposed for generating broadband high-coherence mid-infrared supercontinuum,and the dispersion,effect-ive mod...An alternative elliptical and circle air-hole-assisted Al_(0.24)Ga_(0.76)As photonic crystal fiber(PCF)was proposed for generating broadband high-coherence mid-infrared supercontinuum,and the dispersion,effect-ive mode area and nonlinear coefficient were investigated by using finite element method(FEM),the evolu-tion of optical pulses propagating along the fiber was simulated,and the supercontinuum and the coherence were analyzed and evaluated under different pumping conditions.The results show that a supercontinuum spectrum with a spectral width of 4.852μm can be obtained in the proposed fiber with d_(1)/Λof 0.125,d_(2)/Λof 0.583 and the zero-dispersion wavelength of 3.228μm by pumping with a Gaussian pulse with a peak power of 800 W and a full width at half maximum(FWHM)of 20 fs at wavelength of 3.3μm.When the fiber is pumped by the pulse with the peak power of 2000 W,the FWHM of 80 fs at the wavelength of 4.0μm in the in the anomalous dispersion region,the modulation instability is obviously suppressed,and the high-coher-ence supercontinuum spectrum spanning from 1.1μm to 8.99μm is observed.A part of the pulse energy is transferred to the anomalous dispersion region when pumped at the wavelength of 2.8μm in the normal dis-persion region and a broadband high-coherence supercontinuum spectrum extending from 0.8μm to 9.8μm is generated in the 10 mm proposed fiber.This paper introduces elliptical air holes in the Al_(0.24)Ga_(0.76)As photonic crystal fiber,which enhances flexibility for tailoring the performance of supercontinuum,ultimately achieving the broadest supercontinuum spectrum with the shortest fiber length to date.展开更多
根据掺杂稀土离子固体材料激光冷却四能级理论模型,冷却样品的背景吸收系数是影响样品激光冷却性能的关键参数.为了探究冷却样品(以Yb^(3+):LuLiF_(4)(LLF)为例)中背景吸收系数与温度的函数关系,设计了在低温条件下获取冷却晶体背景吸...根据掺杂稀土离子固体材料激光冷却四能级理论模型,冷却样品的背景吸收系数是影响样品激光冷却性能的关键参数.为了探究冷却样品(以Yb^(3+):LuLiF_(4)(LLF)为例)中背景吸收系数与温度的函数关系,设计了在低温条件下获取冷却晶体背景吸收系数的低温-激光诱导温度调制光谱(laser-induced temperature modulation spectrum,LITMoS)实验方案.依据热负载理论推导了低温条件下冷却效率的实验计算公式,并对热负载来源进行理论分析.分析结果表明,接触传导热负载是低温-LITMoS实验样品热负载的主要来源.实验方案中采用液氮低温恒温器和特殊设计的冷指结构去控制晶体的温度,利用时间阀门-差分荧光光谱测温法对晶体进行非接触式测温获得晶体的温降,并对实验设计方案进行了可行性分析,计算了对应波长下的样品冷却效率.结果表明,在低温条件下实验设计方案可以测量样品背景吸收系数与温度之间的函数关系,制冷效率的测试结果符合光学制冷理论模型的预测.展开更多
文摘An alternative elliptical and circle air-hole-assisted Al_(0.24)Ga_(0.76)As photonic crystal fiber(PCF)was proposed for generating broadband high-coherence mid-infrared supercontinuum,and the dispersion,effect-ive mode area and nonlinear coefficient were investigated by using finite element method(FEM),the evolu-tion of optical pulses propagating along the fiber was simulated,and the supercontinuum and the coherence were analyzed and evaluated under different pumping conditions.The results show that a supercontinuum spectrum with a spectral width of 4.852μm can be obtained in the proposed fiber with d_(1)/Λof 0.125,d_(2)/Λof 0.583 and the zero-dispersion wavelength of 3.228μm by pumping with a Gaussian pulse with a peak power of 800 W and a full width at half maximum(FWHM)of 20 fs at wavelength of 3.3μm.When the fiber is pumped by the pulse with the peak power of 2000 W,the FWHM of 80 fs at the wavelength of 4.0μm in the in the anomalous dispersion region,the modulation instability is obviously suppressed,and the high-coher-ence supercontinuum spectrum spanning from 1.1μm to 8.99μm is observed.A part of the pulse energy is transferred to the anomalous dispersion region when pumped at the wavelength of 2.8μm in the normal dis-persion region and a broadband high-coherence supercontinuum spectrum extending from 0.8μm to 9.8μm is generated in the 10 mm proposed fiber.This paper introduces elliptical air holes in the Al_(0.24)Ga_(0.76)As photonic crystal fiber,which enhances flexibility for tailoring the performance of supercontinuum,ultimately achieving the broadest supercontinuum spectrum with the shortest fiber length to date.
文摘根据掺杂稀土离子固体材料激光冷却四能级理论模型,冷却样品的背景吸收系数是影响样品激光冷却性能的关键参数.为了探究冷却样品(以Yb^(3+):LuLiF_(4)(LLF)为例)中背景吸收系数与温度的函数关系,设计了在低温条件下获取冷却晶体背景吸收系数的低温-激光诱导温度调制光谱(laser-induced temperature modulation spectrum,LITMoS)实验方案.依据热负载理论推导了低温条件下冷却效率的实验计算公式,并对热负载来源进行理论分析.分析结果表明,接触传导热负载是低温-LITMoS实验样品热负载的主要来源.实验方案中采用液氮低温恒温器和特殊设计的冷指结构去控制晶体的温度,利用时间阀门-差分荧光光谱测温法对晶体进行非接触式测温获得晶体的温降,并对实验设计方案进行了可行性分析,计算了对应波长下的样品冷却效率.结果表明,在低温条件下实验设计方案可以测量样品背景吸收系数与温度之间的函数关系,制冷效率的测试结果符合光学制冷理论模型的预测.
