Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric ...Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1° to 123.5°.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.展开更多
High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality c...High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality consistency,equipment miniaturization,and minimum manpower is an inevitable requirement to adapt to the current social technology development trend.Here reported is the microfluidic preparation of u-DAAF with tunable particle size by a passive swirling microreactor.Under the guidance of recrystallization growth kinetics and mixing behavior of fluids in the swirling microreactor,the key parameters(liquid flow rate,explosive concentration and crystallization temperature)were screened and optimized through screening experiments.Under the condition that no surfactant is added and only experimental parameters are controlled,the particle size of recrystallized DAAF can be adjusted from 98 nm to 785 nm,and the corresponding specific surface area is 8.45 m^(2)·g^(-1)to 1.33 m^(2)·g^(-1).In addition,the preparation method has good batch stability,high yield(90.8%-92.6%)and high purity(99.0%-99.4%),indicating a high practical application potential.Electric explosion derived flyer initiation tests demonstrate that the u-DAAF shows an initiation sensitivity much lower than that of the raw DAAF,and comparable to that of the refined DAAF by conventional spraying crystallization method.This study provides an efficient method to fabricate u-DAAF with narrow particle size distribution and high reproducibility as well as a theoretical reference for fabrication of other ultrafine explosives.展开更多
基金supported by Research Fund of SWUST for PhD(Grant No.22zx7175)Sichuan Science and Technology Program(Grant No.2024NSFSC1097)。
文摘Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1° to 123.5°.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.
基金the National Natural Science Foundation of China (Grant No.22105184)Research Fund of SWUST for PhD (Grant No.22zx7175)+1 种基金Sichuan Science and Technology Program (Grant No.2019ZDZX0013)Institute of Chemical Materials Program (Grant No.SXK-2022-03)for financial support。
文摘High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality consistency,equipment miniaturization,and minimum manpower is an inevitable requirement to adapt to the current social technology development trend.Here reported is the microfluidic preparation of u-DAAF with tunable particle size by a passive swirling microreactor.Under the guidance of recrystallization growth kinetics and mixing behavior of fluids in the swirling microreactor,the key parameters(liquid flow rate,explosive concentration and crystallization temperature)were screened and optimized through screening experiments.Under the condition that no surfactant is added and only experimental parameters are controlled,the particle size of recrystallized DAAF can be adjusted from 98 nm to 785 nm,and the corresponding specific surface area is 8.45 m^(2)·g^(-1)to 1.33 m^(2)·g^(-1).In addition,the preparation method has good batch stability,high yield(90.8%-92.6%)and high purity(99.0%-99.4%),indicating a high practical application potential.Electric explosion derived flyer initiation tests demonstrate that the u-DAAF shows an initiation sensitivity much lower than that of the raw DAAF,and comparable to that of the refined DAAF by conventional spraying crystallization method.This study provides an efficient method to fabricate u-DAAF with narrow particle size distribution and high reproducibility as well as a theoretical reference for fabrication of other ultrafine explosives.
