Regarding the as-cast Mg-9.5Gd-4Y-2.2Zn-0.5Zr alloy,the effect of heat treatment on its properties at room temperature(RT),as well as the mechanical properties and microstructure evolution of various peak-aging sample...Regarding the as-cast Mg-9.5Gd-4Y-2.2Zn-0.5Zr alloy,the effect of heat treatment on its properties at room temperature(RT),as well as the mechanical properties and microstructure evolution of various peak-aging samples at different tensile temperatures were discussed in this article.The results indicated that the optimal heat treatment process of the alloy was:520℃×24 h+200℃×112 h.Under this condition,the yield strength(YS),ultimate tensile strength(UTS)and elongation(EL)at RT were:238 MPa,327 MPa and 2.5%,respectively.As the tensile temperature increases,the strength increases firstly and then decreases,but the ductility increases monotonously.The microstructures evolution of 200℃ peak-aging(200PA)and 250℃ peak-aging(250PA)samples were different with the increasing tensile tenperature.When tensile test processed at 150℃,the denseβ’phase and rod-shaped basalγ’phase will be formed in the 200PA sample.However,at 300℃,theβ’phases disappeared.Theβ’and LPSO phases in the 250PA sample coarsened gradually as the tensile temperature increased,and 14H-LPSO phases were formed during tensile at 300℃.The 200PA sample reached the highest strength when tensile at 150℃,which was attributed to the hindrance of the basal dislocation and non-basal dislocation slip by the prismaticβ’phases and the newly formed basalγ’precipitates.展开更多
The strain-controlled cyclic deformation behaviour of Mg-9Gd-4Y-2Zn-0.5Zr with different structures was investigated. Alloys were prepared by solution, extrusion and pre-ageing extrusion, and the microstructures befor...The strain-controlled cyclic deformation behaviour of Mg-9Gd-4Y-2Zn-0.5Zr with different structures was investigated. Alloys were prepared by solution, extrusion and pre-ageing extrusion, and the microstructures before and after the fatigue tests were characterized.Experimental results indicated that the bimodal structure owned the better performance in fatigue test, which was attributed to the higher yield strength. For the equiaxed structure, cyclic hardening induced stress concentration until the failure. Stable cyclic deformation and persistent cyclic softening played an important role at the low and high strain amplitudes, respectively. This was attributed to the formation of fine grains relieving the stress concentration during cyclic loading. In addition, residual twins were observed in equiaxed structure to induce crack, and the bimodal structure effectively restrain it.展开更多
基金supported by the National Natu-ral Science Foundation of China(Grant No.52075501).
文摘Regarding the as-cast Mg-9.5Gd-4Y-2.2Zn-0.5Zr alloy,the effect of heat treatment on its properties at room temperature(RT),as well as the mechanical properties and microstructure evolution of various peak-aging samples at different tensile temperatures were discussed in this article.The results indicated that the optimal heat treatment process of the alloy was:520℃×24 h+200℃×112 h.Under this condition,the yield strength(YS),ultimate tensile strength(UTS)and elongation(EL)at RT were:238 MPa,327 MPa and 2.5%,respectively.As the tensile temperature increases,the strength increases firstly and then decreases,but the ductility increases monotonously.The microstructures evolution of 200℃ peak-aging(200PA)and 250℃ peak-aging(250PA)samples were different with the increasing tensile tenperature.When tensile test processed at 150℃,the denseβ’phase and rod-shaped basalγ’phase will be formed in the 200PA sample.However,at 300℃,theβ’phases disappeared.Theβ’and LPSO phases in the 250PA sample coarsened gradually as the tensile temperature increased,and 14H-LPSO phases were formed during tensile at 300℃.The 200PA sample reached the highest strength when tensile at 150℃,which was attributed to the hindrance of the basal dislocation and non-basal dislocation slip by the prismaticβ’phases and the newly formed basalγ’precipitates.
基金the supports provided by the National Natural Science Foundation of China (Grant No.52075501)“XX supporting scientific research project”(xxxx2019-021)JCKY2018408B003,Magnesium alloy highperformance XXX multi-directional extrusion technology。
文摘The strain-controlled cyclic deformation behaviour of Mg-9Gd-4Y-2Zn-0.5Zr with different structures was investigated. Alloys were prepared by solution, extrusion and pre-ageing extrusion, and the microstructures before and after the fatigue tests were characterized.Experimental results indicated that the bimodal structure owned the better performance in fatigue test, which was attributed to the higher yield strength. For the equiaxed structure, cyclic hardening induced stress concentration until the failure. Stable cyclic deformation and persistent cyclic softening played an important role at the low and high strain amplitudes, respectively. This was attributed to the formation of fine grains relieving the stress concentration during cyclic loading. In addition, residual twins were observed in equiaxed structure to induce crack, and the bimodal structure effectively restrain it.
