The formation mechanism of inclusion in welds with different aluminum contents was determined based on thermodynamic equilibrium in self-shielded flux cored arc welds.Inclusions in welds were systematically studied by...The formation mechanism of inclusion in welds with different aluminum contents was determined based on thermodynamic equilibrium in self-shielded flux cored arc welds.Inclusions in welds were systematically studied by optical microscopy,scanning microscopy and image analyzer.The results show that the average size and the contamination rate of inclusions in low-aluminum weld are lower than those in high-aluminum weld.Highly faceted AlN inclusions with big size in the high-aluminum weld are more than those in low-aluminum weld.As a result,the low temperature impact toughness of low-aluminum weld is higher than that of high-aluminum weld.Finally,the thermodynamic analysis indicates that thermodynamic result agrees with the experimental data.展开更多
Five experimental self-shielded flux cored wires are fabricated withdifferent amount of Fe_2O_3 in the flux. The effect of Fe_2O_3 on welding technology and mechanicalproperties of weld metals deposited by these wires...Five experimental self-shielded flux cored wires are fabricated withdifferent amount of Fe_2O_3 in the flux. The effect of Fe_2O_3 on welding technology and mechanicalproperties of weld metals deposited by these wires are studied. The results show that with theincrease of Fe_2O_3 in the mix, the melting point of the pretreated mix is increased. LiBaF_3 andBaFe_(12)O_(19), which are very low in inherent moisture, are formed after the pretreatment. Themechanical properties are evaluated to the weld metals. The low temperature notch toughness of theweld metals is increased linearly with the Fe_2O_3 content in the flux due to the balance betweenFe_2O_3 and residual Al in the weld metal. The optimum Fe_2O_3 content in flux is 2.5 percent approx3.5 percent.展开更多
Two G. somalense monosomic alien addition lines were identified from the derived backcross progenies of allohexaploid between G. hirsutum and G. somalense through cytological and morphological observation. Furthermore...Two G. somalense monosomic alien addition lines were identified from the derived backcross progenies of allohexaploid between G. hirsutum and G. somalense through cytological and morphological observation. Furthermore, the alien addition chromosome was identified and distinguished by RAPD analysis. A total of 160 RAPD primers were used for PCR amplification. Primer SBSG11 could produce a spe-cific molecular marker (600 bp) for monosomic alien addi-tion line Ⅰ(MAAL Ⅰ). Primer SBSC03 could produce a specific molecular marker (700 bp) for monosomic alien ad-dition line Ⅱ(MAAL Ⅱ). SBSE07 and SBSE08 could re-spectively produce common molecular marker for mono-somic alien addition lines Ⅰ and Ⅱ. G . somalense alien addition lines could be important for cotton improvement.展开更多
文摘The formation mechanism of inclusion in welds with different aluminum contents was determined based on thermodynamic equilibrium in self-shielded flux cored arc welds.Inclusions in welds were systematically studied by optical microscopy,scanning microscopy and image analyzer.The results show that the average size and the contamination rate of inclusions in low-aluminum weld are lower than those in high-aluminum weld.Highly faceted AlN inclusions with big size in the high-aluminum weld are more than those in low-aluminum weld.As a result,the low temperature impact toughness of low-aluminum weld is higher than that of high-aluminum weld.Finally,the thermodynamic analysis indicates that thermodynamic result agrees with the experimental data.
文摘Five experimental self-shielded flux cored wires are fabricated withdifferent amount of Fe_2O_3 in the flux. The effect of Fe_2O_3 on welding technology and mechanicalproperties of weld metals deposited by these wires are studied. The results show that with theincrease of Fe_2O_3 in the mix, the melting point of the pretreated mix is increased. LiBaF_3 andBaFe_(12)O_(19), which are very low in inherent moisture, are formed after the pretreatment. Themechanical properties are evaluated to the weld metals. The low temperature notch toughness of theweld metals is increased linearly with the Fe_2O_3 content in the flux due to the balance betweenFe_2O_3 and residual Al in the weld metal. The optimum Fe_2O_3 content in flux is 2.5 percent approx3.5 percent.
文摘Two G. somalense monosomic alien addition lines were identified from the derived backcross progenies of allohexaploid between G. hirsutum and G. somalense through cytological and morphological observation. Furthermore, the alien addition chromosome was identified and distinguished by RAPD analysis. A total of 160 RAPD primers were used for PCR amplification. Primer SBSG11 could produce a spe-cific molecular marker (600 bp) for monosomic alien addi-tion line Ⅰ(MAAL Ⅰ). Primer SBSC03 could produce a specific molecular marker (700 bp) for monosomic alien ad-dition line Ⅱ(MAAL Ⅱ). SBSE07 and SBSE08 could re-spectively produce common molecular marker for mono-somic alien addition lines Ⅰ and Ⅱ. G . somalense alien addition lines could be important for cotton improvement.
