Purpose Future large high-luminosity electron–positron colliders such as circular electron positron collider(CEPC)and future circular collider(FCC-ee)require nanometer-sized beams at the interaction point(IP).The lum...Purpose Future large high-luminosity electron–positron colliders such as circular electron positron collider(CEPC)and future circular collider(FCC-ee)require nanometer-sized beams at the interaction point(IP).The luminosity is very sensitive to the beam orbit drifts at the IP.It is essential to have a fast luminosity feedback system at the IP to maintain optimum beam collision conditions and prevent a luminosity degradation due to orbit drifts in the presence of mechanical vibrations and dynamical imperfections.Methods We considered two possible methods for this purpose for CEPC:one based on measurements of the luminosity and the other based on measurements of the beam orbits around the IP.Results In this paper,we present the preliminary design consideration for a fast luminosity feedback system at the IP of CEPC.展开更多
Correction to:Radiation Detection Technology and Methods(2024)8:1-1105.https://doi.org/10.1007/s41605-024-00463-y.In this article all authors name was missing in the springer link.It has been corrected.The original ar...Correction to:Radiation Detection Technology and Methods(2024)8:1-1105.https://doi.org/10.1007/s41605-024-00463-y.In this article all authors name was missing in the springer link.It has been corrected.The original article has been corrected.展开更多
The Circular Electron Positron Collider(CEPC)is a large scientific project initiated and hosted by China,fostered through extensive collaboration with international partners.The complex comprises four accelerators:a 3...The Circular Electron Positron Collider(CEPC)is a large scientific project initiated and hosted by China,fostered through extensive collaboration with international partners.The complex comprises four accelerators:a 30 GeV Linac,a 1.1 GeV Damping Ring,a Booster capable of achieving energies up to 180 GeV,and a Collider operating at varying energy modes(Z,W,H,and tt).The Linac and Damping Ring are situated on the surface,while the subterranean Booster and Collider are housed in a 100 km circumference underground tunnel,strategically accommodating future expansion with provisions for a potential Super Proton Proton Collider(SPPC).The CEPC primarily serves as a Higgs factory.In its baseline design with synchrotron radiation(SR)power of 30 MW per beam,it can achieve a luminosity of 5×10^(34)cm^(-2)s^(-1)per interaction point(IP),resulting in an integrated luminosity of 13 ab^(-1)for two IPs over a decade,producing 2.6 million Higgs bosons.Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons,facilitating precise measurements of Higgs coupling at sub-percent levels,exceeding the precision expected from the HL-LHC by an order of magnitude.This Technical Design Report(TDR)follows the Preliminary Conceptual Design Report(Pre-CDR,2015)and the Conceptual Design Report(CDR,2018),comprehensively detailing the machine's layout,performance metrics,physical design and analysis,technical systems design,R&D and prototyping efforts,and associated civil engineering aspects.Additionally,it includes a cost estimate and a preliminary construction timeline,establishing a framework for forthcoming engineering design phase and site selection procedures.Construction is anticipated to begin around 2027-2028,pending government approval,with an estimated duration of 8 years.The commencement of experiments and data collection could potentially be initiated in the mid-2030s.展开更多
Purpose In order to update the BPM electronic in BEPCII,a high-performance digital BPM processor is designed,and the RF front-end electronic is the key part in the digital BPM processor system.Methods According to the...Purpose In order to update the BPM electronic in BEPCII,a high-performance digital BPM processor is designed,and the RF front-end electronic is the key part in the digital BPM processor system.Methods According to the BEPCII physical parameters andADCunder-sampling theorem,the low-noise and high-dynamicrange RF front-end electronic module is designed.This article will introduce filter,RF amplifier,isolation,system test,etc.Results and conclusions The experimental results showed that BPM position short-term resolution is better than 100 nm,and long-term resolution is better than 5μm.It is the first domestic BPM processor that runs stably in the storage ring accelerator for a long time.Meanwhile,the study can help us to establish a solid foundation for the next work of BPM electronics development.展开更多
Purpose Streak camera is an important device for bunch length measurement.The errors introduced by streak camera should be considered in measurement.In order to accurately measure bunch length,some streak camera calib...Purpose Streak camera is an important device for bunch length measurement.The errors introduced by streak camera should be considered in measurement.In order to accurately measure bunch length,some streak camera calibrations are studied at BEPC II.Methods In this context,the point spread function,caused by the optical system,is measured at focus mode with both deflec-tions disabled.In the same conditions,the influence of camera gain on measurement is studied.For the dual sweep mode of streak camera,a calibration method using electrical delays is applied to calibrate the beam size result.Results Firstly,a point spread function calibration 1.78 ps of streak camera optical system is obtained with focus mode.Secondly,studying the effect of camera gain on measurement,an optimal camera gain range from 506 to 662 is selected,in which the bunch length measurement error is within 0.5 ps.Thirdly,a dual sweep calibration factor 1.02 is obtained.Conclusions For BEPCII bunch length,there is a little difference before and after the streak camera calibrations.However,for the accurate measurement of ultra-short bunch length,the calibrations are of great significance.展开更多
Purpose The high energy photon source(HEPS)is a 4th generation synchrotron light source under construction by the institute of high energy physics.The accelerator complex consists of a 500-MeV Linac,a full-energy sync...Purpose The high energy photon source(HEPS)is a 4th generation synchrotron light source under construction by the institute of high energy physics.The accelerator complex consists of a 500-MeV Linac,a full-energy synchrotron booster,a 6-GeV synchrotron storage ring(SR),and three e-beam transport lines for injection and extraction among accelerators.A global timing system(GTS)covers the timing needs for all accelerator,beamline,and experiment systems.The GTS is designed to coordinate the injection processes and various measurements and protections.Most systems require that the RMS jitter of the GTS signal is less than 30 ps,while the trigger jitters for the electron gun and SR injection and extraction kickers are less than 10 ps.Method The HEPS GTS is an event-based timing system based on MicroTCA.4 hardware architecture.The MicroTCA.4300 series products from the micro-research Finland Oy are implemented in the HEPS GTS system.Results and conclusions The RMS jitter,integrated from 1 Hz to 10 MHz,of the 166.6 MHz event clock is 5.489 ps.The RMS jitter of TTL outputs is less than 30 ps.This paper reports the design of the HEPS GTS,which satisfies all of the HEPS physics requirements for timing with preliminary test results shown.展开更多
Purpose The absolute beam position measurement in the booster and storage ring of the high energy photon source(HEPS)requires the offset between the electrical and mechanical centers of the beam position monitor(BPM)....Purpose The absolute beam position measurement in the booster and storage ring of the high energy photon source(HEPS)requires the offset between the electrical and mechanical centers of the beam position monitor(BPM).Method Traditionally,an RF signal is sent to an antenna or stretched wire aligned with the vacuum chamber,and the signal at each electrode is measured.Conversely,a replacement method using a vector network analyzer,which was proposed by Lambertson,does not involve mechanical alignment and can be used for electrical offset determination.Results and conclusions The electro-mechanical offsets of booster BPMs of the HEPS were measured using the Lambertson method.The result shows good agreement with the stretched wire method within a 30μm error.展开更多
Purpose Based on the requirements of the High Energy Photon Source(HEPS),the key components for strip-type and button-type beam position monitors(BPMs)and feedthroughs are designed and manufactured.Method The mechanic...Purpose Based on the requirements of the High Energy Photon Source(HEPS),the key components for strip-type and button-type beam position monitors(BPMs)and feedthroughs are designed and manufactured.Method The mechanical structure of the feedthroughs is designed according to the Computer Simulation Technology(CST)simulation results.Resultsandconclusions Small batches of feedthroughs are manufactured,and the structure is optimized based on mechanical,vacuum,electromagnetic,and other characteristic test results.The performance improved significantly owing to optimization through batch product testing,and quality control-related information from several manufacturers is obtained,which provide a foundation for the development of BPMs for HEPS.展开更多
Background BEPCⅡis an electron-positron collider with a beam energy of 1.89 GeV and luminosity of 1×10^(33)cm^(-2)s^(-1).Being a complex accelerator,fault diagnostics both in an accurate manner and in time are o...Background BEPCⅡis an electron-positron collider with a beam energy of 1.89 GeV and luminosity of 1×10^(33)cm^(-2)s^(-1).Being a complex accelerator,fault diagnostics both in an accurate manner and in time are often challenging during its operation.Purpose The fault diagnosis research platform is capable of locating and resolving faults on time,thus can largely improve the operation of BEPCⅡby reducing downtime due to machine fault and consequently satisfying the demand for fault diagnosis of a complex system.Methods Making full use of the existing large-scale hardware foundation,abundant data resources and previous experiences,a fault diagnosis research platform was built by applying data mining,machine learning and other related algorithms to carry out specific fault analysis on the entire system.Conclusion The fault diagnosis research platform has been developed with implemented functions of data query,statistics and analysis.Partial fault diagnoses of the three subsystems have been realized.The 4W1 power supply fault has been successfully discovered,and effective solutions have been subsequently provided.展开更多
Background In the linac of Beijing Electron Positron Collider II(BEPCII),the resolution of existing BPMs is several hundred microns.But the requirement of transverse position resolution of BPM for future top-up inject...Background In the linac of Beijing Electron Positron Collider II(BEPCII),the resolution of existing BPMs is several hundred microns.But the requirement of transverse position resolution of BPM for future top-up injection needs to be more precise.Purpose This paper is mainly concerned about the design and simulation of the cavity beam position monitor(CBPM)for BEPCII linac and free electron laser(FEL).The requirement of beam transverse position resolution for linac is several microns,even a few nanometers for FEL.Methods When the beam bunch goes through the CBPM,it can excite different electromagnetic field modes in resonator.In these modes,TM_(110) is the most sensitive to beam transverse position offset.The design of CBPM is aim to analyze the relationship between TM_(110) and beam transverse position by CST Studio and Ansys HFSS.Conclusion In this research,we design a pair of rectangular slots for position cavity to revise the direction of electromagnetic field.The simulation result of theoretical resolution is able to reach 15 nm@1nC with the operating frequency 2500 MHz.It is obviously that CBPM has more excellent resolution than all of operating BPM in BEPCII.Meanwhile,the research of CBPM improves the application of beam detection technology in BEPCII and accumulates technology for future design of HEPS and FEL.The mechanical design of the prototype is being fabricated.展开更多
Purpose Hundreds of digital beam position monitor processors(DBPM)are required to be produced during the construction of projects such as High Energy Photon Source(HEPS)and the upgrade project of the Beijing Electron ...Purpose Hundreds of digital beam position monitor processors(DBPM)are required to be produced during the construction of projects such as High Energy Photon Source(HEPS)and the upgrade project of the Beijing Electron Positron Collider(BEPCII),which brings great challenges to the test work.In order to achieve accurate,fast,and complete mass production tests of DBPMs,an automatic test system(ATS)has been developed in this article.Methods According to the test items of DBPM,the standardized testing softwareflow is designed based on virtual instru-ment program control technology and experimental physics and industrial control system(EPICS),which realize automatic adjustment of test parameters and automatic acquisition of test result data.Results and conclusions The ATS can realize one-button testing of channel coefficients,channel linearity,attenuator linearity,beam current dependence(BCD)and sampling signal-to-noise ratio(SNR),and generate test reports.The total test time is less than 3 minutes,which is significantly more efficient compared to manual testing.More than 90 BEPCII DBPMs has been tested by this ATS in the lab.The test results proved that such a system could automatically recognize defective products and satisfy the requirements of mass testing.展开更多
Background The current strategy to achieve high luminosity for high energy physics experiments is to store huge currents distributed in many bunches in circular machines such as BEPCII,so the longitudinal coupled bunc...Background The current strategy to achieve high luminosity for high energy physics experiments is to store huge currents distributed in many bunches in circular machines such as BEPCII,so the longitudinal coupled bunch instabilities of the beam are inevitable.Purpose Therefore,a longitudinal feedback system is needed to suppress longitudinal oscillation.Otherwise,the beam energy spread will increase;the luminosity and the beam lifetime will decrease under a certain beam current.Methods For filter design of the feedback system,the time domain least square fitting(TDLSF)method is compared to the selective wave filter method;digital signal processing electronics based on commercial board have been developed and tested on BEPCII.Results The final result shows that the self-developed longitudinal feedback system can suppress the longitudinal beam oscillation at 750 mA beam current and meet the requirements of BEPCII;the restrain depth to the sidebands reaches to 40.8 dB.展开更多
基金Supported by the National Natural Science Foundation of China(Grant No.12175249).
文摘Purpose Future large high-luminosity electron–positron colliders such as circular electron positron collider(CEPC)and future circular collider(FCC-ee)require nanometer-sized beams at the interaction point(IP).The luminosity is very sensitive to the beam orbit drifts at the IP.It is essential to have a fast luminosity feedback system at the IP to maintain optimum beam collision conditions and prevent a luminosity degradation due to orbit drifts in the presence of mechanical vibrations and dynamical imperfections.Methods We considered two possible methods for this purpose for CEPC:one based on measurements of the luminosity and the other based on measurements of the beam orbits around the IP.Results In this paper,we present the preliminary design consideration for a fast luminosity feedback system at the IP of CEPC.
文摘Correction to:Radiation Detection Technology and Methods(2024)8:1-1105.https://doi.org/10.1007/s41605-024-00463-y.In this article all authors name was missing in the springer link.It has been corrected.The original article has been corrected.
基金support from diverse funding sources,including the National Key Program for S&T Research and Development of the Ministry of Science and Technology(MOST),Yifang Wang's Science Studio of the Ten Thousand Talents Project,the CAS Key Foreign Cooperation Grant,the National Natural Science Foundation of China(NSFC)Beijing Municipal Science&Technology Commission,the CAS Focused Science Grant,the IHEP Innovation Grant,the CAS Lead Special Training Programthe CAS Center for Excellence in Particle Physics,the CAS International Partnership Program,and the CAS/SAFEA International Partnership Program for Creative Research Teams.
文摘The Circular Electron Positron Collider(CEPC)is a large scientific project initiated and hosted by China,fostered through extensive collaboration with international partners.The complex comprises four accelerators:a 30 GeV Linac,a 1.1 GeV Damping Ring,a Booster capable of achieving energies up to 180 GeV,and a Collider operating at varying energy modes(Z,W,H,and tt).The Linac and Damping Ring are situated on the surface,while the subterranean Booster and Collider are housed in a 100 km circumference underground tunnel,strategically accommodating future expansion with provisions for a potential Super Proton Proton Collider(SPPC).The CEPC primarily serves as a Higgs factory.In its baseline design with synchrotron radiation(SR)power of 30 MW per beam,it can achieve a luminosity of 5×10^(34)cm^(-2)s^(-1)per interaction point(IP),resulting in an integrated luminosity of 13 ab^(-1)for two IPs over a decade,producing 2.6 million Higgs bosons.Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons,facilitating precise measurements of Higgs coupling at sub-percent levels,exceeding the precision expected from the HL-LHC by an order of magnitude.This Technical Design Report(TDR)follows the Preliminary Conceptual Design Report(Pre-CDR,2015)and the Conceptual Design Report(CDR,2018),comprehensively detailing the machine's layout,performance metrics,physical design and analysis,technical systems design,R&D and prototyping efforts,and associated civil engineering aspects.Additionally,it includes a cost estimate and a preliminary construction timeline,establishing a framework for forthcoming engineering design phase and site selection procedures.Construction is anticipated to begin around 2027-2028,pending government approval,with an estimated duration of 8 years.The commencement of experiments and data collection could potentially be initiated in the mid-2030s.
基金the National Natural Science Foundation of China(11805221)the Union Foundation of excellent post-doctoral of China Post-Doctoral Science Foundation and Chinese Science Academy(Y71I21)。
文摘Purpose In order to update the BPM electronic in BEPCII,a high-performance digital BPM processor is designed,and the RF front-end electronic is the key part in the digital BPM processor system.Methods According to the BEPCII physical parameters andADCunder-sampling theorem,the low-noise and high-dynamicrange RF front-end electronic module is designed.This article will introduce filter,RF amplifier,isolation,system test,etc.Results and conclusions The experimental results showed that BPM position short-term resolution is better than 100 nm,and long-term resolution is better than 5μm.It is the first domestic BPM processor that runs stably in the storage ring accelerator for a long time.Meanwhile,the study can help us to establish a solid foundation for the next work of BPM electronics development.
文摘Purpose Streak camera is an important device for bunch length measurement.The errors introduced by streak camera should be considered in measurement.In order to accurately measure bunch length,some streak camera calibrations are studied at BEPC II.Methods In this context,the point spread function,caused by the optical system,is measured at focus mode with both deflec-tions disabled.In the same conditions,the influence of camera gain on measurement is studied.For the dual sweep mode of streak camera,a calibration method using electrical delays is applied to calibrate the beam size result.Results Firstly,a point spread function calibration 1.78 ps of streak camera optical system is obtained with focus mode.Secondly,studying the effect of camera gain on measurement,an optimal camera gain range from 506 to 662 is selected,in which the bunch length measurement error is within 0.5 ps.Thirdly,a dual sweep calibration factor 1.02 is obtained.Conclusions For BEPCII bunch length,there is a little difference before and after the streak camera calibrations.However,for the accurate measurement of ultra-short bunch length,the calibrations are of great significance.
基金This work was supported by the High Energy Photon Source(HEPS)project,a major national science and technology infrastructure in Chinasupported by the fund of JSQ2018ZZ03 of the Key Laboratory of Particle Acceleration Physics&Technology,Institute of High Energy Physics,Chinese Academy of Sciences(CAS)and Youth Innovation Promotion Association,CAS(2019016).
文摘Purpose The high energy photon source(HEPS)is a 4th generation synchrotron light source under construction by the institute of high energy physics.The accelerator complex consists of a 500-MeV Linac,a full-energy synchrotron booster,a 6-GeV synchrotron storage ring(SR),and three e-beam transport lines for injection and extraction among accelerators.A global timing system(GTS)covers the timing needs for all accelerator,beamline,and experiment systems.The GTS is designed to coordinate the injection processes and various measurements and protections.Most systems require that the RMS jitter of the GTS signal is less than 30 ps,while the trigger jitters for the electron gun and SR injection and extraction kickers are less than 10 ps.Method The HEPS GTS is an event-based timing system based on MicroTCA.4 hardware architecture.The MicroTCA.4300 series products from the micro-research Finland Oy are implemented in the HEPS GTS system.Results and conclusions The RMS jitter,integrated from 1 Hz to 10 MHz,of the 166.6 MHz event clock is 5.489 ps.The RMS jitter of TTL outputs is less than 30 ps.This paper reports the design of the HEPS GTS,which satisfies all of the HEPS physics requirements for timing with preliminary test results shown.
基金funded by the Youth Innovation Promotion Association CAS(No.2019013 and Y202005)the National Natural Science Foundation of China(No.11975254).
文摘Purpose The absolute beam position measurement in the booster and storage ring of the high energy photon source(HEPS)requires the offset between the electrical and mechanical centers of the beam position monitor(BPM).Method Traditionally,an RF signal is sent to an antenna or stretched wire aligned with the vacuum chamber,and the signal at each electrode is measured.Conversely,a replacement method using a vector network analyzer,which was proposed by Lambertson,does not involve mechanical alignment and can be used for electrical offset determination.Results and conclusions The electro-mechanical offsets of booster BPMs of the HEPS were measured using the Lambertson method.The result shows good agreement with the stretched wire method within a 30μm error.
基金funded by the Youth Innovation Promotion Association CAS(Nos.2019013 and Y202005)the National Natural Science Foundation of China(No.11975254).
文摘Purpose Based on the requirements of the High Energy Photon Source(HEPS),the key components for strip-type and button-type beam position monitors(BPMs)and feedthroughs are designed and manufactured.Method The mechanical structure of the feedthroughs is designed according to the Computer Simulation Technology(CST)simulation results.Resultsandconclusions Small batches of feedthroughs are manufactured,and the structure is optimized based on mechanical,vacuum,electromagnetic,and other characteristic test results.The performance improved significantly owing to optimization through batch product testing,and quality control-related information from several manufacturers is obtained,which provide a foundation for the development of BPMs for HEPS.
基金provided by Youth Innovation Promotion Asso-ciation of the Chinese Academy of Sciences(Grant No.2016011)
文摘Background BEPCⅡis an electron-positron collider with a beam energy of 1.89 GeV and luminosity of 1×10^(33)cm^(-2)s^(-1).Being a complex accelerator,fault diagnostics both in an accurate manner and in time are often challenging during its operation.Purpose The fault diagnosis research platform is capable of locating and resolving faults on time,thus can largely improve the operation of BEPCⅡby reducing downtime due to machine fault and consequently satisfying the demand for fault diagnosis of a complex system.Methods Making full use of the existing large-scale hardware foundation,abundant data resources and previous experiences,a fault diagnosis research platform was built by applying data mining,machine learning and other related algorithms to carry out specific fault analysis on the entire system.Conclusion The fault diagnosis research platform has been developed with implemented functions of data query,statistics and analysis.Partial fault diagnoses of the three subsystems have been realized.The 4W1 power supply fault has been successfully discovered,and effective solutions have been subsequently provided.
基金the Major Projects of the Ministry of Science and Technology(Grant No.2016YFA040190301).
文摘Background In the linac of Beijing Electron Positron Collider II(BEPCII),the resolution of existing BPMs is several hundred microns.But the requirement of transverse position resolution of BPM for future top-up injection needs to be more precise.Purpose This paper is mainly concerned about the design and simulation of the cavity beam position monitor(CBPM)for BEPCII linac and free electron laser(FEL).The requirement of beam transverse position resolution for linac is several microns,even a few nanometers for FEL.Methods When the beam bunch goes through the CBPM,it can excite different electromagnetic field modes in resonator.In these modes,TM_(110) is the most sensitive to beam transverse position offset.The design of CBPM is aim to analyze the relationship between TM_(110) and beam transverse position by CST Studio and Ansys HFSS.Conclusion In this research,we design a pair of rectangular slots for position cavity to revise the direction of electromagnetic field.The simulation result of theoretical resolution is able to reach 15 nm@1nC with the operating frequency 2500 MHz.It is obviously that CBPM has more excellent resolution than all of operating BPM in BEPCII.Meanwhile,the research of CBPM improves the application of beam detection technology in BEPCII and accumulates technology for future design of HEPS and FEL.The mechanical design of the prototype is being fabricated.
基金funded by the Foundation ofYouth Innovation Promotion Association,CAS(No.Y202005)the Major achievements cultivation project of major scientific and technological infrastructure,CAS(No.NE01G74Y2)the National Natural Science Foundation of China(No.11805221).
文摘Purpose Hundreds of digital beam position monitor processors(DBPM)are required to be produced during the construction of projects such as High Energy Photon Source(HEPS)and the upgrade project of the Beijing Electron Positron Collider(BEPCII),which brings great challenges to the test work.In order to achieve accurate,fast,and complete mass production tests of DBPMs,an automatic test system(ATS)has been developed in this article.Methods According to the test items of DBPM,the standardized testing softwareflow is designed based on virtual instru-ment program control technology and experimental physics and industrial control system(EPICS),which realize automatic adjustment of test parameters and automatic acquisition of test result data.Results and conclusions The ATS can realize one-button testing of channel coefficients,channel linearity,attenuator linearity,beam current dependence(BCD)and sampling signal-to-noise ratio(SNR),and generate test reports.The total test time is less than 3 minutes,which is significantly more efficient compared to manual testing.More than 90 BEPCII DBPMs has been tested by this ATS in the lab.The test results proved that such a system could automatically recognize defective products and satisfy the requirements of mass testing.
文摘Background The current strategy to achieve high luminosity for high energy physics experiments is to store huge currents distributed in many bunches in circular machines such as BEPCII,so the longitudinal coupled bunch instabilities of the beam are inevitable.Purpose Therefore,a longitudinal feedback system is needed to suppress longitudinal oscillation.Otherwise,the beam energy spread will increase;the luminosity and the beam lifetime will decrease under a certain beam current.Methods For filter design of the feedback system,the time domain least square fitting(TDLSF)method is compared to the selective wave filter method;digital signal processing electronics based on commercial board have been developed and tested on BEPCII.Results The final result shows that the self-developed longitudinal feedback system can suppress the longitudinal beam oscillation at 750 mA beam current and meet the requirements of BEPCII;the restrain depth to the sidebands reaches to 40.8 dB.
