In order to improve the comprehensive properties of the Cu-11.9Al-2.5Mn shape memory alloy(SMA),multilayer graphene(MLG)carried by Cu_(51)Zr_(14)inoculant particles was incorporated and dispersed into this alloy throu...In order to improve the comprehensive properties of the Cu-11.9Al-2.5Mn shape memory alloy(SMA),multilayer graphene(MLG)carried by Cu_(51)Zr_(14)inoculant particles was incorporated and dispersed into this alloy through preparing the preform of the cold-pressed MLG-Cu_(51)Zr_(14)composite powders.In the resultant novel MLG/Cu-Al-Mn composites,MLG in fragmented or flocculent form has a good bonding with the Cu-Al-Mn matrix.MLG can prevent the coarsening of grains of the Cu-Al-Mn SMA and cause thermal mismatch dislocations near the MLG/Cu-Al-Mn interfaces.The damping and mechanical properties of the MLG/Cu-Al-Mn composites are significantly improved.When the content of MLG reaches 0.2 wt.%,the highest room temperature damping of 0.0558,tensile strength of 801.5 MPa,elongation of 10.8%,and hardness of HV 308 can be obtained.On the basis of in-depth observation of microstructures,combined with the theory of internal friction and strengthening and toughening theories of metals,the relevant mechanisms are discussed.展开更多
A novel mechanical stirring-assisted double-melt in-situ reaction casting process was developed to prepare Cu-1TiB2(wt%)composites.The effects of preparation parameters(melting reaction temperature,stirring rate and s...A novel mechanical stirring-assisted double-melt in-situ reaction casting process was developed to prepare Cu-1TiB2(wt%)composites.The effects of preparation parameters(melting reaction temperature,stirring rate and stirring time)on the microstructure and properties of Cu-1TiB2 composites were investigated.The melt viscosity and particle motion during stirring process were analyzed.The strong turbulence and shear effects generated by mechanical stirring in the melt not only significantly improve the particle distribution but also contribute to adequate in-situ reactions and precise control of the chemical composition.The optimal preparation parameters were 1200℃,a stirring rate of 100 r·min^(−1) and a stirring time of 1 min.Combined with the cold rolling process,the tensile strength,elongation and electrical conductivity of the composite reached 475 MPa,6.0%and 88.4%IACS,respectively,which were significantly better than the composite prepared by manual stirring.The good plasticity is attributed to the uniform distribution of TiB_(2) particles,effectively retarding the crack propagation.The dispersion of particles promotes heterogeneous nucleation of Cu matrix and inhibits grain growth.On the other hand,dispersed particles contribute to grain shear fracture and dislocation multiplication during cold deformation.Therefore,the composite achieves higher dislocation strengthening and grain boundary strengthening.展开更多
Copper matrix composites(CMCs)offer promising applications by combining the functional characteristics of copper with composite phases.With the rapid advancement in aerospace,microelectronics,and intelligent terminal ...Copper matrix composites(CMCs)offer promising applications by combining the functional characteristics of copper with composite phases.With the rapid advancement in aerospace,microelectronics,and intelligent terminal engineering,the demand for CMCs with superior mechanical and electrical properties has become increasingly critical.This paper reviews the design principles,preparation methods,microstructures and properties of some typical CMCs.The existing form of composite phases in the Cu matrix and their effects on microstructure evolution and comprehensive properties are summarised.Key underlying mechanisms governing these enhancements are discussed.The results provide a systematic understanding of the relationship between reinforcement phases and properties,offering insights for the future development of CMCs aimed to achieve much better comprehensive properties.The paper concludes by outlining the development trends and future outlook for the application of CMCs.展开更多
Our recently proposed three-step method showed the promising potential to improve the accuracy of relative wavelength response(RWR) characterization in the wavelength-modulation spectroscopy(WMS) over the commonly use...Our recently proposed three-step method showed the promising potential to improve the accuracy of relative wavelength response(RWR) characterization in the wavelength-modulation spectroscopy(WMS) over the commonly used summation method.A detailed comparison of the three-step method and the summation method,for the wavelength-scanned WMS gas-sensing,was performed with different laser parameters(modulation indexes and scan indexes) and gas properties(pressures and concentrations).Simulation results show that the accuracy of the predicted gas parameters is strongly limited by the RWR characterization with large modulation index and high gas pressure conditions.Both fitting residuals of RWR and errors of predicted gas parameters from the recently proposed three-step method are nearly 2 orders of magnitude smaller than those from the summation method.In addition,the three-step method is further improved by introducing a coupling term for the 2^(nd) harmonic amplitude.Experiments with CO_(2) absorption transition at 6976.2026 cm^(-1) were conducted and validated the simulation analysis.The modified-three-step method presents an improved accuracy in RWR description with at least 5% smaller fitting residual for all conditions compared with the three-step method,although the deviation of the deduced CO_(2) concentrations between these two methods does not exceed 0.2%.展开更多
In this study, 75% and 96% argon diluent conditions were selected to determine the ig- nition delay time of stoichiometric mixture of C2Ha/O2/Ar within a range of pressures （1.3-：3.0 arm） and temperatures （1092-17...In this study, 75% and 96% argon diluent conditions were selected to determine the ig- nition delay time of stoichiometric mixture of C2Ha/O2/Ar within a range of pressures （1.3-：3.0 arm） and temperatures （1092-1743 K）. Results showed a logarithmic linear rela- tionship of the ignition delay time with the reciprocal of temperatures. Under both two diluent conditions, ignition delay time decreased with increased temperature. By multiple linear regression analysis, the ignition delay correlation was deduced. According to this correlation, the calculated ignition delay time in 96% diluent was found to be nearly five times that in 75% diluent. To explain this discrepancy, the hard-sphere collision theory was adopted, and the collision numbers of ethylene to oxygen were calculated. The total collision numbers of ethylene to oxygen were 5.99×10^30 s^-1cm^-3 in 75% diluent and 1.53×10^29 s^-1cm^-3 in 96% diluent （about 40 times that in 75% diluent）. According to the discrepancy between ignition delay time and collision numbers, viz. 5 times corresponds to 40 times, the steric factor can展开更多
基金supported by the Natural Science Foundation of Hebei Province,China(No.E2021202017)the National Natural Science Foundation of China(No.52061038)+3 种基金the Foundation Strengthening Program,China(No.2019-JCJQ-ZD-142-00)the Hebei Province Graduate Innovation Funding Project,China(No.CXZZBS2022032)the Jiangsu Provincial Policy Guidance Program(Special Project for the Introduction of Foreign Talents)Talent Introduction Program,China(No.BX2021024)the Science Plan Foundation of Tianjin Municipal Education Commission,China(No.2021KJ026)。
文摘In order to improve the comprehensive properties of the Cu-11.9Al-2.5Mn shape memory alloy(SMA),multilayer graphene(MLG)carried by Cu_(51)Zr_(14)inoculant particles was incorporated and dispersed into this alloy through preparing the preform of the cold-pressed MLG-Cu_(51)Zr_(14)composite powders.In the resultant novel MLG/Cu-Al-Mn composites,MLG in fragmented or flocculent form has a good bonding with the Cu-Al-Mn matrix.MLG can prevent the coarsening of grains of the Cu-Al-Mn SMA and cause thermal mismatch dislocations near the MLG/Cu-Al-Mn interfaces.The damping and mechanical properties of the MLG/Cu-Al-Mn composites are significantly improved.When the content of MLG reaches 0.2 wt.%,the highest room temperature damping of 0.0558,tensile strength of 801.5 MPa,elongation of 10.8%,and hardness of HV 308 can be obtained.On the basis of in-depth observation of microstructures,combined with the theory of internal friction and strengthening and toughening theories of metals,the relevant mechanisms are discussed.
基金supported by the National Natural Science Foundation of China(Nos.U2202255 and 52371038)the Science and Technology Innovation Program of Hunan Province(No.2023RC1019).
文摘A novel mechanical stirring-assisted double-melt in-situ reaction casting process was developed to prepare Cu-1TiB2(wt%)composites.The effects of preparation parameters(melting reaction temperature,stirring rate and stirring time)on the microstructure and properties of Cu-1TiB2 composites were investigated.The melt viscosity and particle motion during stirring process were analyzed.The strong turbulence and shear effects generated by mechanical stirring in the melt not only significantly improve the particle distribution but also contribute to adequate in-situ reactions and precise control of the chemical composition.The optimal preparation parameters were 1200℃,a stirring rate of 100 r·min^(−1) and a stirring time of 1 min.Combined with the cold rolling process,the tensile strength,elongation and electrical conductivity of the composite reached 475 MPa,6.0%and 88.4%IACS,respectively,which were significantly better than the composite prepared by manual stirring.The good plasticity is attributed to the uniform distribution of TiB_(2) particles,effectively retarding the crack propagation.The dispersion of particles promotes heterogeneous nucleation of Cu matrix and inhibits grain growth.On the other hand,dispersed particles contribute to grain shear fracture and dislocation multiplication during cold deformation.Therefore,the composite achieves higher dislocation strengthening and grain boundary strengthening.
基金support by the Key-Area Research and Development Program of Guangdong Province,China(No.2024B0101080003)Hunan Provincial Natural Science Foundation of China(No.2024JJ2076)grants from the State Key Laboratory of Powder Metallurgy,Central South University,China.
文摘Copper matrix composites(CMCs)offer promising applications by combining the functional characteristics of copper with composite phases.With the rapid advancement in aerospace,microelectronics,and intelligent terminal engineering,the demand for CMCs with superior mechanical and electrical properties has become increasingly critical.This paper reviews the design principles,preparation methods,microstructures and properties of some typical CMCs.The existing form of composite phases in the Cu matrix and their effects on microstructure evolution and comprehensive properties are summarised.Key underlying mechanisms governing these enhancements are discussed.The results provide a systematic understanding of the relationship between reinforcement phases and properties,offering insights for the future development of CMCs aimed to achieve much better comprehensive properties.The paper concludes by outlining the development trends and future outlook for the application of CMCs.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51906120 and 11972213)China Postdoctoral Science Foundation(Grant Nos.2018M640125 and 2019T120088)the National Basic Research Program of China(Grant No.2016YFC0201104)。
文摘Our recently proposed three-step method showed the promising potential to improve the accuracy of relative wavelength response(RWR) characterization in the wavelength-modulation spectroscopy(WMS) over the commonly used summation method.A detailed comparison of the three-step method and the summation method,for the wavelength-scanned WMS gas-sensing,was performed with different laser parameters(modulation indexes and scan indexes) and gas properties(pressures and concentrations).Simulation results show that the accuracy of the predicted gas parameters is strongly limited by the RWR characterization with large modulation index and high gas pressure conditions.Both fitting residuals of RWR and errors of predicted gas parameters from the recently proposed three-step method are nearly 2 orders of magnitude smaller than those from the summation method.In addition,the three-step method is further improved by introducing a coupling term for the 2^(nd) harmonic amplitude.Experiments with CO_(2) absorption transition at 6976.2026 cm^(-1) were conducted and validated the simulation analysis.The modified-three-step method presents an improved accuracy in RWR description with at least 5% smaller fitting residual for all conditions compared with the three-step method,although the deviation of the deduced CO_(2) concentrations between these two methods does not exceed 0.2%.
文摘In this study, 75% and 96% argon diluent conditions were selected to determine the ig- nition delay time of stoichiometric mixture of C2Ha/O2/Ar within a range of pressures （1.3-：3.0 arm） and temperatures （1092-1743 K）. Results showed a logarithmic linear rela- tionship of the ignition delay time with the reciprocal of temperatures. Under both two diluent conditions, ignition delay time decreased with increased temperature. By multiple linear regression analysis, the ignition delay correlation was deduced. According to this correlation, the calculated ignition delay time in 96% diluent was found to be nearly five times that in 75% diluent. To explain this discrepancy, the hard-sphere collision theory was adopted, and the collision numbers of ethylene to oxygen were calculated. The total collision numbers of ethylene to oxygen were 5.99×10^30 s^-1cm^-3 in 75% diluent and 1.53×10^29 s^-1cm^-3 in 96% diluent （about 40 times that in 75% diluent）. According to the discrepancy between ignition delay time and collision numbers, viz. 5 times corresponds to 40 times, the steric factor can
