We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-...We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-2(SHANS2),a gas-filled recoil separator located at the China Accelerator Facility for Superheavy Elements(CAFE2).In total,20 decay chains are attributed to ^(288)Mc and 1 decay chain is assigned to ^(287)Mc.The measured oa-decay properties of ^(287,288)Mc as well as its descendants are consistent with the known data.No additional decay chains originating from the 2n or 5n reaction channels were detected.The excitation function of the ^(243)Am(^(48)Ca,3n)^(288)Mc reaction was measured at the cross-section level of picobarn,which indicates the promising capability for the study of heavy and superheavy nuclei at the facility.展开更多
Vacuum brazing was successfully used to join Ti-22Al-25Nb alloy using Ti-Ni-Nb brazing alloys prepared by arc-melting. The influence of Nb content in the Ti-Ni-Nb brazing alloys on the interfacial microstructure and m...Vacuum brazing was successfully used to join Ti-22Al-25Nb alloy using Ti-Ni-Nb brazing alloys prepared by arc-melting. The influence of Nb content in the Ti-Ni-Nb brazing alloys on the interfacial microstructure and mechanical properties of the brazed joints was investigated. The results showed that the interfacial microstructure of brazed joint consisted of B2, O, ？3, and Ti2 Ni phase, while the width of brazing seams varied at different Nb contents. The room temperature shear strength reached359 MPa when the joints were brazed with eutectic Ti40Ni40Nb20 alloy at 1180？C for 20 min, and it was321, 308 and 256 MPa at 500, 650 and 800？C, respectively. Cracks primarily initiated and propagated in ？3compounds, and partially traversed B2＋O region. Moreover, the fracture surface displayed typical ductile dimples when cracks propagated through B2＋O region, which was favorable for the mechanical properties of the brazed joint.展开更多
Recent experiments at the National Ignition Facility and theoretical modeling suggest that side stimulated Raman scattering(SSRS)instability could reduce laser–plasma coupling and generate considerable fluxes of supr...Recent experiments at the National Ignition Facility and theoretical modeling suggest that side stimulated Raman scattering(SSRS)instability could reduce laser–plasma coupling and generate considerable fluxes of suprathermal hot electrons under interaction conditions envisaged for direct-drive schemes for inertial confinement fusion.Nonetheless,SSRS remains to date one of the least understood parametric instabilities.Here,we report the first angularly and spectrally resolved measurements of scattered light at laser intensities relevant for the shock ignition scheme(I×10^(16)W/cm^(2)),showing significant SSRS growth in the direction perpendicular to the laser polarization.Modification of the focal spot shape and orientation,obtained by using two different random phase plates,and of the density gradient of the plasma,by utilizing exploding foil targets of different thicknesses,clearly reveals a different dependence of backward SRS(BSRS)and SSRS on experimental parameters.While convective BSRS scales with plasma density scale length,as expected by linear theory,the growth of SSRS depends on the spot extension in the direction perpendicular to laser polarization.Our analysis therefore demonstrates that under current experimental conditions,with density scale lengths L_(n)≈60–120μm and spot sizes FWHM≈40–100μm,SSRS is limited by laser beam size rather than by the density scale length of the plasma.展开更多
High-temperature confocal scanning laser microscopy(HT-CSLM)is a potent methodology for investigating various phenomena in the field of metallurgy.Initially applied to the observation of solid phase transformations an...High-temperature confocal scanning laser microscopy(HT-CSLM)is a potent methodology for investigating various phenomena in the field of metallurgy.Initially applied to the observation of solid phase transformations and solidification,this method has gained traction in the field of non-metallic inclusion in steels in recent years.An overview of the experimental capabilities of HT-CSLM and the most important results of recent investigations regarding the topics of clean steel production are provided.It includes the formation of intragranular acicular ferrite(IAF)from the surface of non-metallic inclusions during the continuous cooling and heat treatment,which can be especially beneficial in the toughness of heat-affected zones of welded pieces.Furthermore,the investigation of agglomeration mechanisms of non-metallic inclusions(NMIs)in liquid steel is discussed to improve the insight into attraction forces between particles and clogging phenomena during continuous casting.Also,the dissolution of NMIs in various steelmaking slags can be observed by HT-CSLM to compare dissolution rates and mechanisms of NMI,where significant influences of temperature and chemical composition of the slag were shown.Last but not least,the experimental work regarding the interface between steel and slag is discussed,where novel techniques are currently being developed.A comprehensive summary of experimental techniques using HT-CSLM equipment to investigate different interactions of NMIs with steel and slag phases is compiled.展开更多
A fine and equiaxed solidification process delivers multidimensional benefits to Mg-alloys, such as improved castability, reduced casting defects, enhanced mechanical properties, increased corrosion resistance and pot...A fine and equiaxed solidification process delivers multidimensional benefits to Mg-alloys, such as improved castability, reduced casting defects, enhanced mechanical properties, increased corrosion resistance and potential for increased recycled contents. Despite extensive research on grain refinement of Mg-alloys in the last few decades, currently, there is no effective grain refiner available for refining Mg-Al alloys, and our current understanding of grain refining mechanisms is not adequate to facilitate the development of effective grain refiners.Under the EPSRC(UK) Li ME Hub’s research program, substantial advances have been made in understanding the early stages of solidification covering prenucleation, heterogeneous nucleation, grain initiation and grain refinement. In this paper, we provide a comprehensive overview of grain refinement of Mg-alloys by native MgO particles. We show that native MgO particles can be made available for effective grain refinement of Mg-alloys by intensive melt shearing regardless of the alloy compositions. More importantly, we demonstrate that(1) the addition of more potent exogenous particles will not be more effective than native MgO;and(2) MgO particles are difficult to be made more impotent for grain refinement through promoting explosive grain initiation. We suggest that the most effective approach to grain refinement of Mg-alloys is to make more native MgO particles available for grain refinement through dispersion, such as by intensive melt shearing.展开更多
For additive manufactured aluminum alloys,the inferior mechanical properties along the building direction have been a serious weakness.In this study,an optimized heat treatment was developed as a simple and effective ...For additive manufactured aluminum alloys,the inferior mechanical properties along the building direction have been a serious weakness.In this study,an optimized heat treatment was developed as a simple and effective solution.The effects of direct aging on microstructure and mechanical properties along the building direction of AlSi10Mg samples produced via selective laser melting(SLM)were investigated.The results showed that,compared with the conventional heat treatment at elevated temperatures,direct aging at temperatures of 130-190℃ could retain the fine grain microstructure of SLM samples and promote further precipitation of Si phase,however,the growth of pores occurred during direct aging.With increasing aging temperature,while finer cell structures were obtained,more and larger pores were developed,resulting in decreased density of the samples.Two types of pore formation mechanisms were identified.Considering the balance between the refinement of cell structure and the growth of pores,aging at 130℃ was determined as the optimized heat treatment for SLM AlSi10Mg samples.The tensile strength along the building direction of the 130℃ aged sample was increased from 403 MPa to 451 MPa,with relatively high elongation of 6.5%.展开更多
In 2018,the STAR collaboration collected data from^(96)_(44)Ru+^(96)_(44)Ru and^(96)_(40)Zr+^(96)_(40)Zr at√^(S)NN=200 Ge V to search for the presence of the chiral magnetic effect in collisions of nuclei.The isobar ...In 2018,the STAR collaboration collected data from^(96)_(44)Ru+^(96)_(44)Ru and^(96)_(40)Zr+^(96)_(40)Zr at√^(S)NN=200 Ge V to search for the presence of the chiral magnetic effect in collisions of nuclei.The isobar collision species alternated frequently between 9644 Ru+^(96)_(44)Ru and^(96)_(40)Zr+^(96)_(40)Zr.In order to conduct blind analyses of studies related to the chiral magnetic effect in these isobar data,STAR developed a three-step blind analysis procedure.Analysts are initially provided a"reference sample"of data,comprised of a mix of events from the two species,the order of which respects time-dependent changes in run conditions.After tuning analysis codes and performing time-dependent quality assurance on the reference sample,analysts are provided a species-blind sample suitable for calculating efficiencies and corrections for individual≈30-min data-taking runs.For this sample,species-specific information is disguised,but individual output files contain data from a single isobar species.Only run-by-run corrections and code alteration subsequent to these corrections are allowed at this stage.Following these modifications,the"frozen"code is passed over the fully un-blind data,completing the blind analysis.As a check of the feasibility of the blind analysis procedure,analysts completed a"mock data challenge,"analyzing data from Au+Au collisions at√^(S)NN=27 Ge V,collected in 2018.The Au+Au data were prepared in the same manner intended for the isobar blind data.The details of the blind analysis procedure and results from the mock data challenge are presented.展开更多
Detailed visualisation and data analysis of occupancy patterns including spatial distribution and temporal variations are of great importance to delivering energy efficient and productive buildings. An experimental st...Detailed visualisation and data analysis of occupancy patterns including spatial distribution and temporal variations are of great importance to delivering energy efficient and productive buildings. An experimental study comprising 24-h monitoring over 30 full days was conducted in a university library building.Occupancy profiles have been monitored and analysis has been carried out. Central to this monitoring study is the Wi-Fi based indoor positioning system based on the measured Wi-Fi devices' number and locations and data mining methods. Distinct from traditional occupancy and energy studies,more detailed informationrelated to the indoor positions and number of occupants has offered a better understanding of building user behaviour. The implication of the occupancy patterns for energy( e. g. lighting and other building services) efficiency is assessed,assisted with data from lighting sensors where needed. It is found occupancy patterns change dramatically with time. Also,the energy waste patterns have been identified through the method of data association rule mining. If the identified energy waste is removed,the total energy consumption can be reduced by 26. 1%. The indoor positioning information also has implications for optimizing space use,opening hours as well as staff deployment. The work could be extended to more rooms with diverse functions,other seasons and other types of non-domestic buildings for a more comprehensive understanding of building user behaviour and energy efficiency.展开更多
A novel method of liquid metallic film(LMF)bonding was developed to join titanium zirconium molybdenum alloy(TZM)and Nb-Zr alloy with a Ni interlayer.Using this method,a Ni-Zr liquid phase was formed by the eutectic r...A novel method of liquid metallic film(LMF)bonding was developed to join titanium zirconium molybdenum alloy(TZM)and Nb-Zr alloy with a Ni interlayer.Using this method,a Ni-Zr liquid phase was formed by the eutectic reaction and then squeezed out from the gap due to a transient pressure,leaving an LMF.It not only achieved a reliable metallurgical bonding but also served as a transition layer between TZM and Nb-Zr alloy to reduce the mismatch between them thus further improving its performance.The bonding mechanism of the TZM and Nb-Zr system was discussed based on theoretical calculation and high-resolution microscopy analysis.The advantages of this method were established by comparing the microstructure and mechanical properties of LMF bonded joints with that of traditional contact-reaction brazing and direct diffusion bonding.Additionally,the feasibility of the LMF bonding method was also demonstrated by the reliable joining of other high-temperature and immiscible systems.展开更多
The relationship between the viscosity and temperature of Al-Si alloy melts was investigated. The viscosity of three different types of Al-Si alloy melts was measured. It was showed that the relationship between the v...The relationship between the viscosity and temperature of Al-Si alloy melts was investigated. The viscosity of three different types of Al-Si alloy melts was measured. It was showed that the relationship between the viscosity and temperature of hypoeutectic Al-5%Si and eutectic Al- 12.5%Si alloy melts is approximately exponential except for some special zones, but that of the hypereutectic melt is different. The paper discussed the correlation of the viscosity and atomic density, which is thought that the viscosity corresponds to the atomic density to some extent.展开更多
Finite element simulations for metal powder compaction of a clutch plate were performed to examine the stresses during compaction,unloading,and ejection.To describe the mechanical behavior of compacted green body,a mo...Finite element simulations for metal powder compaction of a clutch plate were performed to examine the stresses during compaction,unloading,and ejection.To describe the mechanical behavior of compacted green body,a modified densitydependent Drucker-Prager Cap model was utilized to predict the stress and density distribution of the compacted clutch plate during loading and ejection stages.The results indicate that maximum tensile principal stress was a main driving force for the tensile crack initiation during ejection stage,and shear stress may be another driving force in both compaction and ejection stages for shear crack initiation.There were peak value of the stresses during ejection stage,and the stresses are in compressive state only during compaction stage.Therefore,the tensile crack initiation is not possible during compaction except shear crack.Hoop stress in the clutch plate is of less contribution to the crack initiation during compaction,unloading and ejection.Study of criteria of the crack initiation and fracture is necessary in order to obtain uniform density and crackfree components in the manufacturing of metal powder compaction.展开更多
SiO2–BN ceramic and Ti plate were joined by active brazing in vacuum with Ag–Cu–Ti＋BN composite filler.The effect of BN content,brazing temperature and time on the microstructure and mechanical properties of the b...SiO2–BN ceramic and Ti plate were joined by active brazing in vacuum with Ag–Cu–Ti＋BN composite filler.The effect of BN content,brazing temperature and time on the microstructure and mechanical properties of the brazed joints was investigated.The results showed that a continuous Ti N–Ti B2reaction layer formed adjacent to the SiO2–BN ceramic,whose thickness played a key role in the bonding properties.Four Ti–Cu compound layers,Ti2Cu,Ti3Cu4,Ti Cu2and Ti Cu4,were observed to border Ti substrate due to the strong affinity of Ti and Cu compared with Ag.The central part of the joint was composed of Ag matrix,over which some fine-grains distributed.The added BN particles reacted with Ti in the liquid filler to form fine Ti B whiskers and Ti N particles with low coefficients of thermal expansion（CTE）,leading to the reduction of detrimental residual stress in the joint,and thus improving the joint strength.The maximum shear strength of 31 MPa was obtained when 3 wt%BN was added in the composite filler,which was 158%higher than that brazed with single Ag–Cu–Ti filler metal.The morphology and thickness of the reaction layer adjacent to the parent materials changed correspondingly with the increase of BN content,brazing temperature and holding time.Based on the correlation between the microstructural evolution and brazing parameters,the bonding mechanism of SiO2–BN and Ti was discussed.展开更多
This paper deals with the magnetohydrodynamic （MHD） flow of an Oldroyd 8-constant fluid in a porous medium when no-slip condition is no longer valid. Modified Darcy＇s law is used in the flow modelling. The non-line...This paper deals with the magnetohydrodynamic （MHD） flow of an Oldroyd 8-constant fluid in a porous medium when no-slip condition is no longer valid. Modified Darcy＇s law is used in the flow modelling. The non-linear differential equation with non-linear boundary conditions is solved numerically using finite difference scheme in combination with an iterative technique. Numerical results are obtained for the Couette, Poiseuille and generalized Couette flows. The effects of slip parameters on the velocity profile are discussed.展开更多
The Al/a-C nanocomposite thin films are synthesized on Si substrates using a dense plasma focus device with alu- minum fitted anode and operating with CH4/Ar admixture. X-ray diffractometer results confirm the formati...The Al/a-C nanocomposite thin films are synthesized on Si substrates using a dense plasma focus device with alu- minum fitted anode and operating with CH4/Ar admixture. X-ray diffractometer results confirm the formation of metallic crystalline Al phases using different numbers of focus shots. Raman analyses show the formation of D and G peaks for all thin film samples, confirming the presence of a-C in the nanocomposite thin films. The formation of Al/a-C nanocomposite thin films is further confirmed using X-ray photoelectron spectroscopy analysis. The scanning electron microscope results show that the deposited thin films consist of nanoparticles and their agglomerates. The sizes of th agglomerates increase with increasing numbers of focus deposition shots. The nanoindentation results show the variations in hardness and elastic modulus values of nanocomposite thin film with increasing the number of focus shots. Maximum values of hardness and elastic modulus of the composite thin film prepared using 20 focus shots are found to be about 10.7 GPa and 189.2 GPa, respectively.展开更多
Purpose: To investigate transcleral delivery of ethacrynic acid (ECA) as an innovative drug delivery technique for glaucoma. To design an implant that delivers ECA close to it's site of action i.e. Schlemm's C...Purpose: To investigate transcleral delivery of ethacrynic acid (ECA) as an innovative drug delivery technique for glaucoma. To design an implant that delivers ECA close to it's site of action i.e. Schlemm's Canal. Methods: A polyglycolic acid polymer embedded with ethacrynic acid (Sigma) was formed展开更多
基金supported in part by the National Key R&D Program of China (Contract Nos.2023YFA1606500,2024YFE0109800,and 2024YFE0110400)Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB34010000)+5 种基金the Gansu Key Project of Science and Technology (Grant No.23ZDGA014)the Guangdong Major Project of Basic and Applied Basic Research (Grant No.2021B0301030006)the National Natural Science Foundation of China (Grant Nos.12105328,W2412040,12475126,12422507,12035011,12375118,12435008,and W2412043)the Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-002)the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Grant Nos.2020409 and 2023439)the Russian Science Foundation (Grant No.25-42-00003)。
文摘We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-2(SHANS2),a gas-filled recoil separator located at the China Accelerator Facility for Superheavy Elements(CAFE2).In total,20 decay chains are attributed to ^(288)Mc and 1 decay chain is assigned to ^(287)Mc.The measured oa-decay properties of ^(287,288)Mc as well as its descendants are consistent with the known data.No additional decay chains originating from the 2n or 5n reaction channels were detected.The excitation function of the ^(243)Am(^(48)Ca,3n)^(288)Mc reaction was measured at the cross-section level of picobarn,which indicates the promising capability for the study of heavy and superheavy nuclei at the facility.
基金supported by the National Natural Science Foundation of China (Grant No. 51574177)the China Natural Founds for Distinguished Young Scientists (Grant No. 51325401)the National High Technology Research and Development Program of China (“863” Program, Granted No. 2015AA042504)
文摘Vacuum brazing was successfully used to join Ti-22Al-25Nb alloy using Ti-Ni-Nb brazing alloys prepared by arc-melting. The influence of Nb content in the Ti-Ni-Nb brazing alloys on the interfacial microstructure and mechanical properties of the brazed joints was investigated. The results showed that the interfacial microstructure of brazed joint consisted of B2, O, ？3, and Ti2 Ni phase, while the width of brazing seams varied at different Nb contents. The room temperature shear strength reached359 MPa when the joints were brazed with eutectic Ti40Ni40Nb20 alloy at 1180？C for 20 min, and it was321, 308 and 256 MPa at 500, 650 and 800？C, respectively. Cracks primarily initiated and propagated in ？3compounds, and partially traversed B2＋O region. Moreover, the fracture surface displayed typical ductile dimples when cracks propagated through B2＋O region, which was favorable for the mechanical properties of the brazed joint.
基金financial support from the LASERLAB-EUROPE Access to Research Infrastructure Activity (Application No. 23068)carried out within the framework of EUROfusion Enabling Research Projects AWP21-ENR-01-CEA02 and AWP24-ENR-IFE-02-CEA-02+3 种基金received funding from Euratom Research and Training Programme 2021–2025 under Grant No. 633053supported by the Ministry of Youth and Sports of the Czech Republic [Project No. LM2023068 (PALS RI)]by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant Nos. XDA25030200 and XDA25010100)supported by COST (European Cooperation in Science and Technology) through Action CA21128 PROBONO (PROton BOron Nuclear Fusion: from energy production to medical applicatiOns)
文摘Recent experiments at the National Ignition Facility and theoretical modeling suggest that side stimulated Raman scattering(SSRS)instability could reduce laser–plasma coupling and generate considerable fluxes of suprathermal hot electrons under interaction conditions envisaged for direct-drive schemes for inertial confinement fusion.Nonetheless,SSRS remains to date one of the least understood parametric instabilities.Here,we report the first angularly and spectrally resolved measurements of scattered light at laser intensities relevant for the shock ignition scheme(I×10^(16)W/cm^(2)),showing significant SSRS growth in the direction perpendicular to the laser polarization.Modification of the focal spot shape and orientation,obtained by using two different random phase plates,and of the density gradient of the plasma,by utilizing exploding foil targets of different thicknesses,clearly reveals a different dependence of backward SRS(BSRS)and SSRS on experimental parameters.While convective BSRS scales with plasma density scale length,as expected by linear theory,the growth of SSRS depends on the spot extension in the direction perpendicular to laser polarization.Our analysis therefore demonstrates that under current experimental conditions,with density scale lengths L_(n)≈60–120μm and spot sizes FWHM≈40–100μm,SSRS is limited by laser beam size rather than by the density scale length of the plasma.
基金the Association SSF Strategic Mobility Grant(No.SM22-0039)theÅForsk Foundation(No.23-540)for supporting the research regarding inclusion engineering.
文摘High-temperature confocal scanning laser microscopy(HT-CSLM)is a potent methodology for investigating various phenomena in the field of metallurgy.Initially applied to the observation of solid phase transformations and solidification,this method has gained traction in the field of non-metallic inclusion in steels in recent years.An overview of the experimental capabilities of HT-CSLM and the most important results of recent investigations regarding the topics of clean steel production are provided.It includes the formation of intragranular acicular ferrite(IAF)from the surface of non-metallic inclusions during the continuous cooling and heat treatment,which can be especially beneficial in the toughness of heat-affected zones of welded pieces.Furthermore,the investigation of agglomeration mechanisms of non-metallic inclusions(NMIs)in liquid steel is discussed to improve the insight into attraction forces between particles and clogging phenomena during continuous casting.Also,the dissolution of NMIs in various steelmaking slags can be observed by HT-CSLM to compare dissolution rates and mechanisms of NMI,where significant influences of temperature and chemical composition of the slag were shown.Last but not least,the experimental work regarding the interface between steel and slag is discussed,where novel techniques are currently being developed.A comprehensive summary of experimental techniques using HT-CSLM equipment to investigate different interactions of NMIs with steel and slag phases is compiled.
文摘A fine and equiaxed solidification process delivers multidimensional benefits to Mg-alloys, such as improved castability, reduced casting defects, enhanced mechanical properties, increased corrosion resistance and potential for increased recycled contents. Despite extensive research on grain refinement of Mg-alloys in the last few decades, currently, there is no effective grain refiner available for refining Mg-Al alloys, and our current understanding of grain refining mechanisms is not adequate to facilitate the development of effective grain refiners.Under the EPSRC(UK) Li ME Hub’s research program, substantial advances have been made in understanding the early stages of solidification covering prenucleation, heterogeneous nucleation, grain initiation and grain refinement. In this paper, we provide a comprehensive overview of grain refinement of Mg-alloys by native MgO particles. We show that native MgO particles can be made available for effective grain refinement of Mg-alloys by intensive melt shearing regardless of the alloy compositions. More importantly, we demonstrate that(1) the addition of more potent exogenous particles will not be more effective than native MgO;and(2) MgO particles are difficult to be made more impotent for grain refinement through promoting explosive grain initiation. We suggest that the most effective approach to grain refinement of Mg-alloys is to make more native MgO particles available for grain refinement through dispersion, such as by intensive melt shearing.
基金financially supported by the National Key R&D Program of China(No.2017YFB0703104)。
文摘For additive manufactured aluminum alloys,the inferior mechanical properties along the building direction have been a serious weakness.In this study,an optimized heat treatment was developed as a simple and effective solution.The effects of direct aging on microstructure and mechanical properties along the building direction of AlSi10Mg samples produced via selective laser melting(SLM)were investigated.The results showed that,compared with the conventional heat treatment at elevated temperatures,direct aging at temperatures of 130-190℃ could retain the fine grain microstructure of SLM samples and promote further precipitation of Si phase,however,the growth of pores occurred during direct aging.With increasing aging temperature,while finer cell structures were obtained,more and larger pores were developed,resulting in decreased density of the samples.Two types of pore formation mechanisms were identified.Considering the balance between the refinement of cell structure and the growth of pores,aging at 130℃ was determined as the optimized heat treatment for SLM AlSi10Mg samples.The tensile strength along the building direction of the 130℃ aged sample was increased from 403 MPa to 451 MPa,with relatively high elongation of 6.5%.
文摘In 2018,the STAR collaboration collected data from^(96)_(44)Ru+^(96)_(44)Ru and^(96)_(40)Zr+^(96)_(40)Zr at√^(S)NN=200 Ge V to search for the presence of the chiral magnetic effect in collisions of nuclei.The isobar collision species alternated frequently between 9644 Ru+^(96)_(44)Ru and^(96)_(40)Zr+^(96)_(40)Zr.In order to conduct blind analyses of studies related to the chiral magnetic effect in these isobar data,STAR developed a three-step blind analysis procedure.Analysts are initially provided a"reference sample"of data,comprised of a mix of events from the two species,the order of which respects time-dependent changes in run conditions.After tuning analysis codes and performing time-dependent quality assurance on the reference sample,analysts are provided a species-blind sample suitable for calculating efficiencies and corrections for individual≈30-min data-taking runs.For this sample,species-specific information is disguised,but individual output files contain data from a single isobar species.Only run-by-run corrections and code alteration subsequent to these corrections are allowed at this stage.Following these modifications,the"frozen"code is passed over the fully un-blind data,completing the blind analysis.As a check of the feasibility of the blind analysis procedure,analysts completed a"mock data challenge,"analyzing data from Au+Au collisions at√^(S)NN=27 Ge V,collected in 2018.The Au+Au data were prepared in the same manner intended for the isobar blind data.The details of the blind analysis procedure and results from the mock data challenge are presented.
文摘Detailed visualisation and data analysis of occupancy patterns including spatial distribution and temporal variations are of great importance to delivering energy efficient and productive buildings. An experimental study comprising 24-h monitoring over 30 full days was conducted in a university library building.Occupancy profiles have been monitored and analysis has been carried out. Central to this monitoring study is the Wi-Fi based indoor positioning system based on the measured Wi-Fi devices' number and locations and data mining methods. Distinct from traditional occupancy and energy studies,more detailed informationrelated to the indoor positions and number of occupants has offered a better understanding of building user behaviour. The implication of the occupancy patterns for energy( e. g. lighting and other building services) efficiency is assessed,assisted with data from lighting sensors where needed. It is found occupancy patterns change dramatically with time. Also,the energy waste patterns have been identified through the method of data association rule mining. If the identified energy waste is removed,the total energy consumption can be reduced by 26. 1%. The indoor positioning information also has implications for optimizing space use,opening hours as well as staff deployment. The work could be extended to more rooms with diverse functions,other seasons and other types of non-domestic buildings for a more comprehensive understanding of building user behaviour and energy efficiency.
基金financially supported by the National Natural Science Foundation of China(No.51875400)the Natural Sciences and Engineering Research Council of Canada(NSERC)Discovery grant(RGPIN-2017-05187)the China Scholarship Council(CSC)。
文摘A novel method of liquid metallic film(LMF)bonding was developed to join titanium zirconium molybdenum alloy(TZM)and Nb-Zr alloy with a Ni interlayer.Using this method,a Ni-Zr liquid phase was formed by the eutectic reaction and then squeezed out from the gap due to a transient pressure,leaving an LMF.It not only achieved a reliable metallurgical bonding but also served as a transition layer between TZM and Nb-Zr alloy to reduce the mismatch between them thus further improving its performance.The bonding mechanism of the TZM and Nb-Zr system was discussed based on theoretical calculation and high-resolution microscopy analysis.The advantages of this method were established by comparing the microstructure and mechanical properties of LMF bonded joints with that of traditional contact-reaction brazing and direct diffusion bonding.Additionally,the feasibility of the LMF bonding method was also demonstrated by the reliable joining of other high-temperature and immiscible systems.
文摘The relationship between the viscosity and temperature of Al-Si alloy melts was investigated. The viscosity of three different types of Al-Si alloy melts was measured. It was showed that the relationship between the viscosity and temperature of hypoeutectic Al-5%Si and eutectic Al- 12.5%Si alloy melts is approximately exponential except for some special zones, but that of the hypereutectic melt is different. The paper discussed the correlation of the viscosity and atomic density, which is thought that the viscosity corresponds to the atomic density to some extent.
基金The authors gratefully acknowledge the financial supports of State Key Lab of Advanced Welding and Joining,Harbin Institute of Technology(Nos.AWJ-19Z05).
文摘Finite element simulations for metal powder compaction of a clutch plate were performed to examine the stresses during compaction,unloading,and ejection.To describe the mechanical behavior of compacted green body,a modified densitydependent Drucker-Prager Cap model was utilized to predict the stress and density distribution of the compacted clutch plate during loading and ejection stages.The results indicate that maximum tensile principal stress was a main driving force for the tensile crack initiation during ejection stage,and shear stress may be another driving force in both compaction and ejection stages for shear crack initiation.There were peak value of the stresses during ejection stage,and the stresses are in compressive state only during compaction stage.Therefore,the tensile crack initiation is not possible during compaction except shear crack.Hoop stress in the clutch plate is of less contribution to the crack initiation during compaction,unloading and ejection.Study of criteria of the crack initiation and fracture is necessary in order to obtain uniform density and crackfree components in the manufacturing of metal powder compaction.
基金supported by the National Natural Science Foundation of China (No. 51405332)
文摘SiO2–BN ceramic and Ti plate were joined by active brazing in vacuum with Ag–Cu–Ti＋BN composite filler.The effect of BN content,brazing temperature and time on the microstructure and mechanical properties of the brazed joints was investigated.The results showed that a continuous Ti N–Ti B2reaction layer formed adjacent to the SiO2–BN ceramic,whose thickness played a key role in the bonding properties.Four Ti–Cu compound layers,Ti2Cu,Ti3Cu4,Ti Cu2and Ti Cu4,were observed to border Ti substrate due to the strong affinity of Ti and Cu compared with Ag.The central part of the joint was composed of Ag matrix,over which some fine-grains distributed.The added BN particles reacted with Ti in the liquid filler to form fine Ti B whiskers and Ti N particles with low coefficients of thermal expansion（CTE）,leading to the reduction of detrimental residual stress in the joint,and thus improving the joint strength.The maximum shear strength of 31 MPa was obtained when 3 wt%BN was added in the composite filler,which was 158%higher than that brazed with single Ag–Cu–Ti filler metal.The morphology and thickness of the reaction layer adjacent to the parent materials changed correspondingly with the increase of BN content,brazing temperature and holding time.Based on the correlation between the microstructural evolution and brazing parameters,the bonding mechanism of SiO2–BN and Ti was discussed.
文摘This paper deals with the magnetohydrodynamic （MHD） flow of an Oldroyd 8-constant fluid in a porous medium when no-slip condition is no longer valid. Modified Darcy＇s law is used in the flow modelling. The non-linear differential equation with non-linear boundary conditions is solved numerically using finite difference scheme in combination with an iterative technique. Numerical results are obtained for the Couette, Poiseuille and generalized Couette flows. The effects of slip parameters on the velocity profile are discussed.
文摘The Al/a-C nanocomposite thin films are synthesized on Si substrates using a dense plasma focus device with alu- minum fitted anode and operating with CH4/Ar admixture. X-ray diffractometer results confirm the formation of metallic crystalline Al phases using different numbers of focus shots. Raman analyses show the formation of D and G peaks for all thin film samples, confirming the presence of a-C in the nanocomposite thin films. The formation of Al/a-C nanocomposite thin films is further confirmed using X-ray photoelectron spectroscopy analysis. The scanning electron microscope results show that the deposited thin films consist of nanoparticles and their agglomerates. The sizes of th agglomerates increase with increasing numbers of focus deposition shots. The nanoindentation results show the variations in hardness and elastic modulus values of nanocomposite thin film with increasing the number of focus shots. Maximum values of hardness and elastic modulus of the composite thin film prepared using 20 focus shots are found to be about 10.7 GPa and 189.2 GPa, respectively.
文摘Purpose: To investigate transcleral delivery of ethacrynic acid (ECA) as an innovative drug delivery technique for glaucoma. To design an implant that delivers ECA close to it's site of action i.e. Schlemm's Canal. Methods: A polyglycolic acid polymer embedded with ethacrynic acid (Sigma) was formed
