The excellent shape memory and mechanical properties of Ti Ni shape memory alloys(SMAs) fabricated using selective laser melting(SLM) are highly desirable for a wide range of critical applications. In this study, we e...The excellent shape memory and mechanical properties of Ti Ni shape memory alloys(SMAs) fabricated using selective laser melting(SLM) are highly desirable for a wide range of critical applications. In this study, we examined the simultaneous enhancement of mechanical and shape memory properties using heat-treatment homogenization of Ti_(2)Ni precipitates in a Ti_(50.6)Ni_(49.4)SMA fabricated using SLM. Specifically, because of the complete solution treatment, nanoscale spherical Ti_(2)Ni precipitates were homogeneously dispersed throughout the grain interior. Interestingly, the resultant SMA exhibited an ultrahigh tensile strength of 880 ± 13 MPa, a large elongation of 22.4 ± 0.4%, and an excellent shape memory effect, with a recovery rate of > 98% and ultrahigh recoverable strain of 5.32% after ten loading–unloading cycles. These simultaneously enhanced properties are considerably superior than those of most previously reported Ti Ni SMAs fabricated using additive manufacturing. Fundamentally, the enhancement in tensile strength is ascribed to precipitation strengthening and work hardening, and the large plasticity is mainly attributed to the homogeneous nanoscale globular Ti_(2)Ni precipitates, which effectively impeded the rapid propagation of microcracks. Furthermore, the enhanced shape memory properties are derived from the suppression of dislocation movement and formation of retained stabilized martensite by the presence of high-density dislocations, nanoscale Ti_(2)Ni precipitates, and abundant interfaces. The obtained results provide insight into the enhancement of the two types of properties in Ti Ni SMAs and will accelerate the wider application of SMAs.展开更多
Triangular lattice metamaterials composed of bi-layer curved rib elements (called the Lehman-Lakes lattice) possess unbounded thermal expansion, high stiffness and impossibility of thermal buckling, which are highly d...Triangular lattice metamaterials composed of bi-layer curved rib elements (called the Lehman-Lakes lattice) possess unbounded thermal expansion, high stiffness and impossibility of thermal buckling, which are highly desirable in many engineering structural applications subjected to large fluctuations in temperature. However, the requirement of such lattice metamaterial is that it must be a hinged joint in order to achieve the bending deformation upon heating freely, which directly leads to poor manufacturability, especially in small dimensions. In this study, a new design of dual-constituent triangular lattice metamaterial (DTLM) with good manufacturability is proposed to achieve the identical unbounded thermal expansion. In this lattice, a special bi-layer curved rib element where layer one is partially covered by layer two is presented, where the hinge joints are not necessary because the flexural rigidity in the single-layer part is much smaller than that in the bi-layer part, and the desirable thermal bending deformation can be achieved. A sample fabricated by additive manufacturing is given in order to show the good manufacturability;simultaneously, the multifunctional performance of the tailored DTLM with zero, large positive or negative coefficient of thermal expansion (CTE) can remain excellent, as well as the Lehman-Lakes lattice. Examples illustrate that the DTLM with zero CTE has about 34.2% improvement in stiffness and meanwhile has 17% reduction in weight compared with the Lehman-Lakes lattice. The stiffness of the DTLM has a moderate reduction when achieving the same large positive or negative CTE. In addition, the thermomechanical properties of the DTLM are given by the closed-form analytical solution and their effectiveness is verified by the detailed numerical simulation.展开更多
基金supported financially by the Key-Area Research and Development Program of Guangdong Province (No. 2020B090923001)the National Natural Science Foundation of China (No. U19A2085)+3 种基金the Key Basic and Applied Research Program of Guangdong Province (No. 2019B030302010)the financial support from the China Postdoctoral Science Foundation (No. 2019M662908)Guangdong Basic and Applied Basic Research Foundation (No.2019A1515110215)the Fundamental Research Funds for the Central Universities (No.2020ZYGXZR030)。
文摘The excellent shape memory and mechanical properties of Ti Ni shape memory alloys(SMAs) fabricated using selective laser melting(SLM) are highly desirable for a wide range of critical applications. In this study, we examined the simultaneous enhancement of mechanical and shape memory properties using heat-treatment homogenization of Ti_(2)Ni precipitates in a Ti_(50.6)Ni_(49.4)SMA fabricated using SLM. Specifically, because of the complete solution treatment, nanoscale spherical Ti_(2)Ni precipitates were homogeneously dispersed throughout the grain interior. Interestingly, the resultant SMA exhibited an ultrahigh tensile strength of 880 ± 13 MPa, a large elongation of 22.4 ± 0.4%, and an excellent shape memory effect, with a recovery rate of > 98% and ultrahigh recoverable strain of 5.32% after ten loading–unloading cycles. These simultaneously enhanced properties are considerably superior than those of most previously reported Ti Ni SMAs fabricated using additive manufacturing. Fundamentally, the enhancement in tensile strength is ascribed to precipitation strengthening and work hardening, and the large plasticity is mainly attributed to the homogeneous nanoscale globular Ti_(2)Ni precipitates, which effectively impeded the rapid propagation of microcracks. Furthermore, the enhanced shape memory properties are derived from the suppression of dislocation movement and formation of retained stabilized martensite by the presence of high-density dislocations, nanoscale Ti_(2)Ni precipitates, and abundant interfaces. The obtained results provide insight into the enhancement of the two types of properties in Ti Ni SMAs and will accelerate the wider application of SMAs.
基金the National Natural Science Foundation of China (Grants 11332004 and 11572071)111 Project (Grant B 14013)+1 种基金CATIC Industrial Production Projects (Grant CX Y2013DLLG32)the Fundamental Research Funds for the Central Universities (Grant DUT18ZD103).
文摘Triangular lattice metamaterials composed of bi-layer curved rib elements (called the Lehman-Lakes lattice) possess unbounded thermal expansion, high stiffness and impossibility of thermal buckling, which are highly desirable in many engineering structural applications subjected to large fluctuations in temperature. However, the requirement of such lattice metamaterial is that it must be a hinged joint in order to achieve the bending deformation upon heating freely, which directly leads to poor manufacturability, especially in small dimensions. In this study, a new design of dual-constituent triangular lattice metamaterial (DTLM) with good manufacturability is proposed to achieve the identical unbounded thermal expansion. In this lattice, a special bi-layer curved rib element where layer one is partially covered by layer two is presented, where the hinge joints are not necessary because the flexural rigidity in the single-layer part is much smaller than that in the bi-layer part, and the desirable thermal bending deformation can be achieved. A sample fabricated by additive manufacturing is given in order to show the good manufacturability;simultaneously, the multifunctional performance of the tailored DTLM with zero, large positive or negative coefficient of thermal expansion (CTE) can remain excellent, as well as the Lehman-Lakes lattice. Examples illustrate that the DTLM with zero CTE has about 34.2% improvement in stiffness and meanwhile has 17% reduction in weight compared with the Lehman-Lakes lattice. The stiffness of the DTLM has a moderate reduction when achieving the same large positive or negative CTE. In addition, the thermomechanical properties of the DTLM are given by the closed-form analytical solution and their effectiveness is verified by the detailed numerical simulation.
