The crystallization experiment of molten rare earth(RE)slag under different cooling rates was carried out.The characteristics of element migration and phase distribution during RE phase crystallization were studied by...The crystallization experiment of molten rare earth(RE)slag under different cooling rates was carried out.The characteristics of element migration and phase distribution during RE phase crystallization were studied by using different equipment.The experimental results show that there are two RE phases in the RE slag,namely(Ca,Ce,La)_(5)(SiO_(4))6F and(Ca,Ce,La,Mg)_(3)(Ti,Al,Nb)_(2)O_(7).During the cooling crystallization process of molten RE slag,Ca and P elements in the RE phase of(Ca,Ce,La)_(5)(SiO_(4))_(6)F migrate from inside to outside,and finally gather at the outer edge of the phase to form phase Ca_(3)(PO4)2.The RE phase(Ca,Ce,La)_(5)(SiO_(4))_(6)F is distributed inside the furnace-cooled slag,and the RE phase(Ca,Ce,-La,Mg)_(3)(Ti,AI,Nb)_(2)O_(7)is distributed in the surface layer of the furnace-cooled slag.And based on the phase distribution characteristics,the central hollowing method is proposed to realize the preliminary enrichment of valuable elements Ti,Nb and RE in RE slag.展开更多
lronmaking using an oxygen blast furnace is an attractive approach for reducing energy consumption in the iron and steel industry. This paper presents a numerical study of gas-solid flow in an oxygen blast fur- nace b...lronmaking using an oxygen blast furnace is an attractive approach for reducing energy consumption in the iron and steel industry. This paper presents a numerical study of gas-solid flow in an oxygen blast fur- nace by coupling the discrete element method with computational fluid dynamics. The model reliability was verified by previous experimental results. The influences of particle diameter, shaft tuyere size, and specific ratio （X） of shaft-injected gas （51G） flowrate to total gas flowrate on the SIC penetration behavior and pressure field in the furnace were investigated. The results showed that gas penetration capacity in the furnace gradually decreased as the particle diameter decreased from 100 to 40 mm. Decreasing particle diameter and increasing shaft tuyere size both slightly increased the SIG concentration near the furnace wall but decreased it at the furnace center. The value of X has a significant impact on the SIG distribution. According to the pressure fields obtained under different conditions, the key factor affecting SIG penetration depth is the pressure difference between the upper and lower levels of the shaft tuyere. If the pressure difference is small, the SIG can easily penetrate to the furnace center.展开更多
基金supported by the National Natural Science Foundation of China(51874029)。
文摘The crystallization experiment of molten rare earth(RE)slag under different cooling rates was carried out.The characteristics of element migration and phase distribution during RE phase crystallization were studied by using different equipment.The experimental results show that there are two RE phases in the RE slag,namely(Ca,Ce,La)_(5)(SiO_(4))6F and(Ca,Ce,La,Mg)_(3)(Ti,Al,Nb)_(2)O_(7).During the cooling crystallization process of molten RE slag,Ca and P elements in the RE phase of(Ca,Ce,La)_(5)(SiO_(4))_(6)F migrate from inside to outside,and finally gather at the outer edge of the phase to form phase Ca_(3)(PO4)2.The RE phase(Ca,Ce,La)_(5)(SiO_(4))_(6)F is distributed inside the furnace-cooled slag,and the RE phase(Ca,Ce,-La,Mg)_(3)(Ti,AI,Nb)_(2)O_(7)is distributed in the surface layer of the furnace-cooled slag.And based on the phase distribution characteristics,the central hollowing method is proposed to realize the preliminary enrichment of valuable elements Ti,Nb and RE in RE slag.
基金We gratefully acknowledge the support of the National Basic Research Program of China （973 Program） （No. 2012CB720401 ） and the Key Project of National Natural Science Foundation of China （No. 51134008）.
文摘lronmaking using an oxygen blast furnace is an attractive approach for reducing energy consumption in the iron and steel industry. This paper presents a numerical study of gas-solid flow in an oxygen blast fur- nace by coupling the discrete element method with computational fluid dynamics. The model reliability was verified by previous experimental results. The influences of particle diameter, shaft tuyere size, and specific ratio （X） of shaft-injected gas （51G） flowrate to total gas flowrate on the SIC penetration behavior and pressure field in the furnace were investigated. The results showed that gas penetration capacity in the furnace gradually decreased as the particle diameter decreased from 100 to 40 mm. Decreasing particle diameter and increasing shaft tuyere size both slightly increased the SIG concentration near the furnace wall but decreased it at the furnace center. The value of X has a significant impact on the SIG distribution. According to the pressure fields obtained under different conditions, the key factor affecting SIG penetration depth is the pressure difference between the upper and lower levels of the shaft tuyere. If the pressure difference is small, the SIG can easily penetrate to the furnace center.
