When the operating temperature of a solid oxide electrolysis cell(SOEC)is lower than the outlet temperature of a nuclear reactor,the reactor can be directly coupled with the SOEC as a high-temperature heat source.Howe...When the operating temperature of a solid oxide electrolysis cell(SOEC)is lower than the outlet temperature of a nuclear reactor,the reactor can be directly coupled with the SOEC as a high-temperature heat source.However,the key to the efficiency and return on investment of this hybrid energy system lies in the expected lifetime of the SOEC.This study assessed Ni-YSZ|YSZ|GDC|LSC fuel electrode support cells’long-term stability during electrolysis at 650℃with a current density of−0.5Acm^(−2)over 1818 h.The average voltage degradation rate of 2.63%kh^(−1)unfolded in two phases:an initial rapid decay(90 to 1120 h at 3.58%kh^(−1))and a stable decay(1120 to 1818 h at 2.14%kh^(−1)),emphasizing SOECs’probability coupling with nuclear reactors at 650℃.Post-1818-hour electrolysis revealed nickel particle formation associated with Ni(OH)_(x)diffusion and re-deposition,alongside a strontium-containing layer causing interface cracking.Despite minimal strontium segregation in the EDS,XPS data indicated surface segregation of Sr.This study provides crucial insights into prolonged SOEC operation,highlighting both its potential and challenges.展开更多
A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The su...A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray （EDAX） show that the length and content of perfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.展开更多
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA0400000)the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2021253)+1 种基金the Major Science and Technology Projects of China National Offshore Oil Corporation Limited during the 14th Five Year Plan(No.KJGG-2022-12-CCUS-030500)the Photon Science Center for Carbon Neutrality of Chinese Academy of Science.
文摘When the operating temperature of a solid oxide electrolysis cell(SOEC)is lower than the outlet temperature of a nuclear reactor,the reactor can be directly coupled with the SOEC as a high-temperature heat source.However,the key to the efficiency and return on investment of this hybrid energy system lies in the expected lifetime of the SOEC.This study assessed Ni-YSZ|YSZ|GDC|LSC fuel electrode support cells’long-term stability during electrolysis at 650℃with a current density of−0.5Acm^(−2)over 1818 h.The average voltage degradation rate of 2.63%kh^(−1)unfolded in two phases:an initial rapid decay(90 to 1120 h at 3.58%kh^(−1))and a stable decay(1120 to 1818 h at 2.14%kh^(−1)),emphasizing SOECs’probability coupling with nuclear reactors at 650℃.Post-1818-hour electrolysis revealed nickel particle formation associated with Ni(OH)_(x)diffusion and re-deposition,alongside a strontium-containing layer causing interface cracking.Despite minimal strontium segregation in the EDS,XPS data indicated surface segregation of Sr.This study provides crucial insights into prolonged SOEC operation,highlighting both its potential and challenges.
基金This work was partly supported by the National Natural Science Foundation of China (No. 50273008)Qingdao Municipal Science and Technology Commission.
文摘A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray （EDAX） show that the length and content of perfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.
