The influence of three important operation parameters in Jinlong flashsmelting furnace, including the distributing blast speed, the oxygen enrichment rate of process airand the ratio of central oxygen to overall oxyge...The influence of three important operation parameters in Jinlong flashsmelting furnace, including the distributing blast speed, the oxygen enrichment rate of process airand the ratio of central oxygen to overall oxygen (O_c/O_o), has been investigated using a virtualsimulation system on copper flash smelting furnace. The core of this virtual simulation system is anumerical simulation of CFD (computational fluid dynamics), and this system incorporates couplingmomentum transport, heat transport, mass transport, reaction kinetics between gas and particles andchemical reactions between gas and gas. A set of numerical predicted data were obtained. The CFDsimulation shows that there is a sensitive zone of the distributing blast speed, and the dustcontent ascends when the speed exceeds 180 m centre dot s^(-1). Increasing the oxygen concentrationof processing air benefits the efficient production of the flash smelting furnace.展开更多
Fluid flow, heat transfer and combustion in Jinlong CJD concentrate burnerflash smelting furnace have been investigated by numerical modeling and flow visualization. Themodeling is based on the Eulerian approach for t...Fluid flow, heat transfer and combustion in Jinlong CJD concentrate burnerflash smelting furnace have been investigated by numerical modeling and flow visualization. Themodeling is based on the Eulerian approach for the gas flow equations and the Lagrangian approachfor the particles. Interaction between the gas phase and particle phase, such as frictional forces,heat and mass transfer, are included by the addition of sources and sinks. The modeling resultsincluding the fluid flow field, temperature field, concentration field of gas phase and thetrajectories of particles have been obtained. The predicted results are in good agreement with thedata obtained from a series of experiments and tests in the Jinlong Copper Smelter and thetemperature error is less than 20 K.展开更多
A series of simulations by mathematical and physical modeling on fluid flow,mass and heat transfer in continuous casting tundishes have been carried out. It was found bycomputational fluid dynamics (CFD) simulation th...A series of simulations by mathematical and physical modeling on fluid flow,mass and heat transfer in continuous casting tundishes have been carried out. It was found bycomputational fluid dynamics (CFD) simulation that in most cases tundish flow must be treated as anon-isothermal reactor due to the existence of temperature difference between the transport ladleand the tundish. The critical conditions when the non-isothermal flow in the tundish can not beneglected have been found by CFD simulation and water modeling. A direct measurement in a 40 ttundish has confirmed the simulation results.展开更多
文摘The influence of three important operation parameters in Jinlong flashsmelting furnace, including the distributing blast speed, the oxygen enrichment rate of process airand the ratio of central oxygen to overall oxygen (O_c/O_o), has been investigated using a virtualsimulation system on copper flash smelting furnace. The core of this virtual simulation system is anumerical simulation of CFD (computational fluid dynamics), and this system incorporates couplingmomentum transport, heat transport, mass transport, reaction kinetics between gas and particles andchemical reactions between gas and gas. A set of numerical predicted data were obtained. The CFDsimulation shows that there is a sensitive zone of the distributing blast speed, and the dustcontent ascends when the speed exceeds 180 m centre dot s^(-1). Increasing the oxygen concentrationof processing air benefits the efficient production of the flash smelting furnace.
文摘Fluid flow, heat transfer and combustion in Jinlong CJD concentrate burnerflash smelting furnace have been investigated by numerical modeling and flow visualization. Themodeling is based on the Eulerian approach for the gas flow equations and the Lagrangian approachfor the particles. Interaction between the gas phase and particle phase, such as frictional forces,heat and mass transfer, are included by the addition of sources and sinks. The modeling resultsincluding the fluid flow field, temperature field, concentration field of gas phase and thetrajectories of particles have been obtained. The predicted results are in good agreement with thedata obtained from a series of experiments and tests in the Jinlong Copper Smelter and thetemperature error is less than 20 K.
文摘A series of simulations by mathematical and physical modeling on fluid flow,mass and heat transfer in continuous casting tundishes have been carried out. It was found bycomputational fluid dynamics (CFD) simulation that in most cases tundish flow must be treated as anon-isothermal reactor due to the existence of temperature difference between the transport ladleand the tundish. The critical conditions when the non-isothermal flow in the tundish can not beneglected have been found by CFD simulation and water modeling. A direct measurement in a 40 ttundish has confirmed the simulation results.
