Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generat...Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.展开更多
Agriculture is facing a massive increase in demand per hectare as a result of an ever-expanding population and environmental deterioration.While we have learned much about how environmental conditions and diseases imp...Agriculture is facing a massive increase in demand per hectare as a result of an ever-expanding population and environmental deterioration.While we have learned much about how environmental conditions and diseases impact crop yield,until recently considerably less was known concerning endogenous factors,including within-plant nutrient allocation.In this review,we discuss studies of source-sink interactions covering both fundamental research in model systems under controlled growth conditions and how the findings are being translated to crop plants in the field.In this respect we detail efforts aimed at improving and/or combining C3,C4,and CAM modes of photosynthesis,altering the chloroplastic electron transport chain,modulating photorespiration,adopting bacterial/algal carbon-concentrating mechanisms,and enhancing nitrogen-and water-use efficiencies.Moreover,we discuss how modulating TCA cycle activities and primary metabolism can result in increased rates of photosynthesis and outline the opportunities that evaluating natural variation in photosynthesis may afford.Although source,transport,and sink functions are all covered in this review,we focus on discussing source functions because the majority of research has been conducted in this field.Nevertheless,considerable recent evidence,alongside the evidence from classical studies,demonstrates that both transport and sink functions are also incredibly important determinants of yield.We thus describe recent evidence supporting this notion and suggest that future strategies for yield improvement should focus on combining improvements in each of these steps to approach yield optimization.展开更多
To retrieve the fuel debris in Fukushima Daiichi Nuclear Power Plants(1F),it is essential to infer the fuel debris distribution.In particular,the molten metal spreading behavior is one of the vital phenomena in nuclea...To retrieve the fuel debris in Fukushima Daiichi Nuclear Power Plants(1F),it is essential to infer the fuel debris distribution.In particular,the molten metal spreading behavior is one of the vital phenomena in nuclear severe accidents because it determines the initial condition for further accident scenarios such as molten core concrete interaction(MCCI).In this study,the fundamental molten metal spreading experiments were performed with different outlet diameters and sample amounts to investigate the effect of the outlet for spreading-solidification behavior.In the numerical analysis,the moving particle full-implicit method(MPFI),which is one of the particle methods,was applied to simulate the spreading experiments.In the MPFI framework,the melting-solidification model including heat transfer,radiation heat loss,phase change,and solid fraction-dependent viscosity was developed and implemented.In addition,the difference in the spreading and solidification behavior due to the outlet diameters was reproduced in the calculation.The simulation results reveal the detailed solidification procedure during the molten metal spreading.It is found that the viscosity change and the solid fraction change during the spreading are key factors for the free surface condition and solidified materials.Overall,it is suggested that the MPFI method has the potential to simulate the actual nuclear melt-down phenomena in the future.展开更多
基金financial support from the Nuclear Energy Science&Technology and Human Resource Development Project of the Japan Atomic Energy Agency/Collaborative Laboratories for Advanced Decommissioning Science(No.R04I034)The author Ruicong Xu appreciates the scholarship(financial support)from the China Scholarship Council(CSC,No.202106380073).
文摘Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.
基金We thank the Bill and Melinda Gates Foundation for funding this research through grant INV-008053"Metabolic Engineering of Carbon Pathways to Enhance Yield of Root and Tuber Crops"provided to Professor Dr.Uwe Sonnewald.Dr.Ryo Yokoyama was financially supported as the postdoc-toral fellow of the Japan Society for the Promotion of Science.
文摘Agriculture is facing a massive increase in demand per hectare as a result of an ever-expanding population and environmental deterioration.While we have learned much about how environmental conditions and diseases impact crop yield,until recently considerably less was known concerning endogenous factors,including within-plant nutrient allocation.In this review,we discuss studies of source-sink interactions covering both fundamental research in model systems under controlled growth conditions and how the findings are being translated to crop plants in the field.In this respect we detail efforts aimed at improving and/or combining C3,C4,and CAM modes of photosynthesis,altering the chloroplastic electron transport chain,modulating photorespiration,adopting bacterial/algal carbon-concentrating mechanisms,and enhancing nitrogen-and water-use efficiencies.Moreover,we discuss how modulating TCA cycle activities and primary metabolism can result in increased rates of photosynthesis and outline the opportunities that evaluating natural variation in photosynthesis may afford.Although source,transport,and sink functions are all covered in this review,we focus on discussing source functions because the majority of research has been conducted in this field.Nevertheless,considerable recent evidence,alongside the evidence from classical studies,demonstrates that both transport and sink functions are also incredibly important determinants of yield.We thus describe recent evidence supporting this notion and suggest that future strategies for yield improvement should focus on combining improvements in each of these steps to approach yield optimization.
文摘To retrieve the fuel debris in Fukushima Daiichi Nuclear Power Plants(1F),it is essential to infer the fuel debris distribution.In particular,the molten metal spreading behavior is one of the vital phenomena in nuclear severe accidents because it determines the initial condition for further accident scenarios such as molten core concrete interaction(MCCI).In this study,the fundamental molten metal spreading experiments were performed with different outlet diameters and sample amounts to investigate the effect of the outlet for spreading-solidification behavior.In the numerical analysis,the moving particle full-implicit method(MPFI),which is one of the particle methods,was applied to simulate the spreading experiments.In the MPFI framework,the melting-solidification model including heat transfer,radiation heat loss,phase change,and solid fraction-dependent viscosity was developed and implemented.In addition,the difference in the spreading and solidification behavior due to the outlet diameters was reproduced in the calculation.The simulation results reveal the detailed solidification procedure during the molten metal spreading.It is found that the viscosity change and the solid fraction change during the spreading are key factors for the free surface condition and solidified materials.Overall,it is suggested that the MPFI method has the potential to simulate the actual nuclear melt-down phenomena in the future.
