As a preferable material in the field of photo-detection and catalysis,the characteristics of FePS3 in broad wavelength range have been proven by many experimental studies.However,FePS3 has not been used as a saturabl...As a preferable material in the field of photo-detection and catalysis,the characteristics of FePS3 in broad wavelength range have been proven by many experimental studies.However,FePS3 has not been used as a saturable absorber(SA)in fiber lasers yet.We propose and demonstrate the generation of a single wavelength and dual-wavelength based on an Er-doped fiber laser(EDFL)at 1.5μm by using an innovative FePS3 saturable absorber for the first time.The result shows that a stable passively Q-switched pulse can be generated,which demonstrates that the new two-dimensional(2D)material FePS3 served as SA provides a valid method to realize passively Q-switched laser.In addition,we achieve the output of the dual-wavelength pulse by properly rotating the polarization controller.To the best of our knowledge,the dual-wavelength pulse EDFL could be applied in biomedicine,spectroscopy,and sensing research.展开更多
A review on the progress of powerful 2 μm silica fiber sources in past decades is presented. We review the state-of-the-art records and representative achievements of 2 μm high-average-power continuous- wave, pulsed...A review on the progress of powerful 2 μm silica fiber sources in past decades is presented. We review the state-of-the-art records and representative achievements of 2 μm high-average-power continuous- wave, pulsed fiber lasers and amplifiers, and powerful superfluorescent sources. Challenges which limit the further power scaling of 2 μm silica fiber sources are discussed, including pumping brightness limitation, thermal problem and nonlinear effects. Potential and promising roadmaps to go beyond these limitations, like tandem pumping and beam combining, are discussed. Prospects of powerful 2 μm silica fiber sources are also presented in the end of paper.展开更多
It is well-established that waves are inhomogeneous in a lossy isotropic medium, and the validation of the classical Snell's law is still questionable for light refraction at the dissipative and dispersive interfa...It is well-established that waves are inhomogeneous in a lossy isotropic medium, and the validation of the classical Snell's law is still questionable for light refraction at the dissipative and dispersive interface. With high absorption, direct experimental investigation is rather difficult due to the extremely short penetration depth; i.e., the skin depth. In this paper, a simple and unified description of this issue is proposed, which can be applied to both materials with anomalous dispersion and in the Drude region. The gradient ▽_k~ω is found to be incident angle θ_i-dependent, and the direction of the group velocity may deviate significantly from the phase velocity due to the loss induced permittivity structure. The physics behind the negative refraction effect is explained, and a novel loss induced super-prism effect is also predicted.展开更多
In this work, we investigate suppressing mode instability in detail by varying the seed power in a large mode area all-fiber amplifier with a fiber core diameter of 25 μm. The transverse mode instability(TMI) thresho...In this work, we investigate suppressing mode instability in detail by varying the seed power in a large mode area all-fiber amplifier with a fiber core diameter of 25 μm. The transverse mode instability(TMI) thresholds are systematically measured for different seed power. Our experimental results reveal that increasing the seed power has a positive influence on enhancing the output power before the TMI effect appears, and finally the TMI threshold is approximately doubled from1030 W to 2280 W when the seed power is increased from 27 W to 875 W. Almost 84.7% slope efficiency is reached with different seed power before the TMI threshold power. During our operation, we also find that in this type of LMA fiber the beam quality of the amplifier is degraded gradually instead of a sudden change as the pump power increases.展开更多
Orbital-angular-momentum(OAM)multiplexing technology offers a significant dimension to enlarge communication capacity in free-space optical links.The coherent beam combining(CBC)system can simultaneously realize OAM m...Orbital-angular-momentum(OAM)multiplexing technology offers a significant dimension to enlarge communication capacity in free-space optical links.The coherent beam combining(CBC)system can simultaneously realize OAM multiplexing and achieve high-power laser output,providing substantial advantages for long-distance communication.Herein,we present an integrated CBC system for freespace optical links based on OAM multiplexing and demultiplexing technologies for the first time,to the best of our knowledge.A method to achieve flexible OAM multiplexing and efficient demultiplexing based on the CBC system is proposed and demonstrated both theoretically and experimentally.The experimental results exhibit a low bit error rate of 0.47%and a high recognition precision of 98.58%throughout the entire data transmission process.By employing such an ingenious strategy,this work holds promising prospects for enriching ultra-long-distance structured light communication in the future.展开更多
An all-fiberized and narrow-bandwidth master oscillator power amplification(MOPA) system with record output power of 4 kW level and slope efficiency of 78% is demonstrated. Tandem pumping strategy is tentatively intro...An all-fiberized and narrow-bandwidth master oscillator power amplification(MOPA) system with record output power of 4 kW level and slope efficiency of 78% is demonstrated. Tandem pumping strategy is tentatively introduced into the narrow-bandwidth MOPA system for thermally induced mode instability(TMI) suppression. The stimulated Brillouin scattering(SBS) effect is balanced by simply using one-stage phase modulation technique. With different phase modulation signals, SBS limited output powers of 336 W, 1.2 kW and 3.94 kW are respectively achieved with spectral bandwidths accounting for 90% power of ～0.025, 0.17 and ～0.89 nm. Compared with our previous 976 nm pumping system, TMI threshold is overall boosted to be >5 times in which tandem pumping increases the TMI threshold of >3times. The beam quality(M～2 factor) of the output laser is well within 1.5 below the TMI threshold while it is ultimately saturated to be 1.86 with the influence of TMI at maximal output power. Except for SBS and TMI, stimulated Raman scattering(SRS) effect will be another challenge for further power scaling. In such a high power MOPA system, multidetrimental effects(SBS, SRS and TMI) will coexist and may be mutual-coupled, which could provide a well platform for further comprehensively investigating and optimizing the high power, narrow-bandwidth fiber amplifiers.展开更多
An all-fiber high-power linearly polarized chirped pulse amplification(CPA)system is experimentally demonstrated.Through stretching the pulse duration to a full width of approximately 2 ns with two cascaded chirped fi...An all-fiber high-power linearly polarized chirped pulse amplification(CPA)system is experimentally demonstrated.Through stretching the pulse duration to a full width of approximately 2 ns with two cascaded chirped fiber Bragg gratings(CFBGs),a maximum average output power of 612 W is achieved from a high-gain Yb-doped fiber that has a core diameter of 20μm with a slope efficiency of approximately 68%at the repetition rate of 80 MHz.At the maximum output power,the polarization degree is 92.5%and the M^(2)factor of the output beam quality is approximately 1.29;the slight performance degradations are attributed to the thermal effects in the main amplifier.By optimizing the B-integral of the amplifier and finely adjusting the higher-order dispersion of one of the CFBGs,the pulse width is compressed to 863 fs at the highest power with a compression efficiency of 72%,corresponding to a maximum compressed average power of 440.6 W,single pulse energy of 5.5μJ and peak power of about 4.67 MW.To the best of our knowledge,this is the highest average power of a femtosecond laser directly generated from an all-fiber linearly polarized CPA system.展开更多
In this paper,an all-fiberized and narrow-linewidth 5 kW power-level fiber amplifier is presented.The laser is achieved based on the master oscillator power amplification configuration,in which the phase-modulated sin...In this paper,an all-fiberized and narrow-linewidth 5 kW power-level fiber amplifier is presented.The laser is achieved based on the master oscillator power amplification configuration,in which the phase-modulated single-frequency laser is applied as the seed laser and a bidirectional pumping configuration is applied in the power amplifier.The stimulated Brillouin scattering,stimulated Raman scattering,and transverse mode instability effects are all effectively suppressed in the experiment.Consequently,the output power is scaled up to 4.92 kW with a slope efficiency of as high as approximately 80%.The 3-dB spectral width is about 0.59 nm,and the beam quality is measured to be M^(2)~1.22 at maximum output power.Furthermore,we have also conducted a detailed spectral analysis on the spectral width of the signal laser,which reveals that the spectral wing broadening phenomenon could lead to the obvious decrease of the spectral purity at certain output power.Overall,this work could provide a reference for obtaining and optimizing high-power narrow-linewidth fiber lasers.展开更多
In this paper, we propose and experimentally investigate a linearly polarized narrow-linewidth random fiber laser(RFL) operating at 1080 nm and boost the output power to kilowatt level with near-diffraction-limited be...In this paper, we propose and experimentally investigate a linearly polarized narrow-linewidth random fiber laser(RFL) operating at 1080 nm and boost the output power to kilowatt level with near-diffraction-limited beam quality using a master oscillation power amplifier. The RFL based on a half-opened cavity, which is composed of a linearly polarized narrow-linewidth fiber Bragg grating and a 500 m piece of polarization-maintained Ge-doped fiber, generates a 0.71 W seed laser with an 88 pm full width at half-maximum(FWHM) linewidth and a 22.5 dB polarization extinction ratio(PER) for power scaling. A two-stage fiber amplifier enhances the seed laser to the maximal 1.01 k W with a PER value of 17 dB and a beam quality of M_x^2=1.15 and M_y^2=1.13. No stimulated Brillouin scattering effect is observed at the ultimate power level, and the FWHM linewidth of the amplified random laser broadens linearly as a function of the output power with a coefficient of about 0.1237 pm∕W.To the best of our knowledge, this is the first demonstration of a linearly polarized narrow-linewidth RFL with even kilowatt-level near-diffraction-limited output, and further performance scaling is ongoing.展开更多
We demonstrate a high power linearly polarized Raman fiber laser(RFL)pumped by an amplified spontaneous emission(ASE)source.Temporal-stable operation of RFL could be ensured owing to the employment of ASE,which mitiga...We demonstrate a high power linearly polarized Raman fiber laser(RFL)pumped by an amplified spontaneous emission(ASE)source.Temporal-stable operation of RFL could be ensured owing to the employment of ASE,which mitigates the inherent intensity noise compared with the classic scheme adopting laser oscillator as pump source.In this experiment,the RFL has up to 119.5W output power,with central wavelength of 1129.2nm,and full width at half maximum(FWHM)linewidth of about 4.18nm.The polarization extinction ratio(PER)of the Raman laser is about 23dB.Moreover,this laser has excellent long-term and short-term stabilities in terms of the output power and time domain.展开更多
An all-fiberized high-average-power narrow linewidth ns pulsed laser with linear polarization is demonstrated. The laser system utilizes a typical master oscillator power amplifier(MOPA) configuration. The stimulated ...An all-fiberized high-average-power narrow linewidth ns pulsed laser with linear polarization is demonstrated. The laser system utilizes a typical master oscillator power amplifier(MOPA) configuration. The stimulated Brillouin scattering(SBS) is effectively suppressed due to the short fiber length and large mode area in the main amplifier, combined with the narrow pulse duration smaller than the phonon lifetime of SBS effect. A maximal output power of 466 W is obtained with a narrow linewidth of ～203.6 MHz, and the corresponding slope efficiency is ～80.3%. The pulse duration is condensed to be ～4 ns after the amplification, corresponding to the peak power of 8.8 kW and the pulse energy of 46.6 μJ. Neardiffraction-limited beam quality with an M2 factor of 1.32 is obtained at the output power of 442 W and the mode instability(MI) is observed at the maximal output power. To the best of our knowledge, this is the highest average output power of the all-fiberized narrow linewidth ns pulsed fiber laser with linear polarization and high beam quality, which is a promising source for the nonlinear frequency conversion, laser lidar, and so on.展开更多
Optical signal-to-noise ratio(OSNR) is one of the most significant parameters for the performance characterization of random fiber lasers(RFLs) and their application potentiality in sensing and telecommunication. An e...Optical signal-to-noise ratio(OSNR) is one of the most significant parameters for the performance characterization of random fiber lasers(RFLs) and their application potentiality in sensing and telecommunication. An effective way to improve the OSNR of RFLs is pump scheme optimization, for example, employing a temporally stable source as the pump. In this paper, the output performance of an incoherently pumped RFL dependence on the pump bandwidth has been investigated both in experiment and theory. It is found that a high-OSNR RFL can be achieved with broadband amplified spontaneous emission(ASE) source pumping, and a relatively broad pump bandwidth can also help suppress the spectral broadening while maintaining an ultra-high spectral purity.By optimizing the pump bandwidth to ~10 nm, maximum OSNR of ~39 dB(corresponding to a spectral purity of ~99.96%) with more than 99 W output power can be obtained. Moreover, for the pump bandwidth of 0.6–40 nm, the spectral purity can reach as high as >99% with the pump power ranging from ~85 to ~117 W.In addition, with the aid of theoretical simulation based on a modified power balance model, we find that the increment of pump bandwidth can decrease the effective Raman gain coefficient, further influencing the gain characteristics, nonlinear effects, and eventually the output performance. This work provides new insight into the influence of the pump characteristics on the output performance of incoherently pumped RFLs.展开更多
High power superfluorescent fiber sources(SFSs), which could find wide applications in many fields such as middle infrared laser generation, Raman fiber laser pumping and spectral beam combination, have experienced a ...High power superfluorescent fiber sources(SFSs), which could find wide applications in many fields such as middle infrared laser generation, Raman fiber laser pumping and spectral beam combination, have experienced a flourishing time in recent years for its unique properties, such as short coherence length and high temporal stability. The challenge for performance scalability of powerful SFS mainly lies on the physical issues including parasitic laser oscillation and modal instability(MI). In this contribution, by employing in-band pumping avenue and high-order transverse-mode management, we explore a high power SFS with record power, near-diffraction-limited beam quality and spectral manipulation flexibility. An ultimate output power of 3.14 kW can be obtained with high temporal stability and a beam quality of M^2= 1.59 for the amplified light. Furthermore, the dynamics of spectral evolutions, including redshifting of central wavelength and unsymmetrical broadening in spectral wings, of the main amplifier with different seed linewidths are investigated contrastively. Benefiting from the unique high pump brightness and high MI threshold of in-band pumping scheme, the demonstrated system also manifests promising performance scaling potential.展开更多
In this paper,we report a coherent beam combining(CBC)system that involves two thulium-doped all-polarization maintaining(PM)fiber chirped pulse amplifiers.Through phase-locking the two channels via a fiber stretcher ...In this paper,we report a coherent beam combining(CBC)system that involves two thulium-doped all-polarization maintaining(PM)fiber chirped pulse amplifiers.Through phase-locking the two channels via a fiber stretcher by using the stochastic parallel gradient descent(SPGD)algorithm,a maximum average power of 265 W is obtained,with a CBC efficiency of 81%and a residual phase error of λ/17.After de-chirping by a pair of diffraction gratings,the duration of the combined laser pulse is compressed to 690 fs.Taking into account the compression efficiency of 90%and the main peak energy proportion of 91%,the corresponding peak power is calculated to be 4 MW.The laser noise characteristics before and after CBC are examined,and the results indicate that the CBC would degrade the low frequency relative intensity noise(RIN),of which the integration is 1.74%in[100 Hz,2 MHz]at the maximum combined output power.In addition,the effects of the nonlinear spectrum broadening during chirped pulse amplification on the CBC efficiency are also investigated,showing that a higher extent of pulse stretching is effective in alleviating the spectrum broadening and realizing a higher output power with decent combining efficiency.展开更多
The quantum defect(QD)is an important issue that demands prompt attention in high-power fiber lasers.A large QD may aggravate the thermal load in the laser,which would impact the frequency,amplitude noise and mode sta...The quantum defect(QD)is an important issue that demands prompt attention in high-power fiber lasers.A large QD may aggravate the thermal load in the laser,which would impact the frequency,amplitude noise and mode stability,and threaten the security of the high-power laser system.Here,we propose and demonstrate a cladding-pumped Raman fiber laser(RFL)with QD of less than 1%.Using the Raman gain of the boson peak in a phosphorus-doped fiber to enable the cladding pump,the QD is reduced to as low as 0.78%with a 23.7 W output power.To our knowledge,this is the lowest QD ever reported in a cladding-pumped RFL.Furthermore,the output power can be scaled to 47.7 W with a QD of 1.29%.This work not only offers a preliminary platform for the realization of high-power low-QD fiber lasers,but also proves the great potential of low-QD fiber lasers in power scaling.展开更多
In this study,we investigated the influence of fiber parameters on stimulated Raman scattering(SRS)and identified a unique pattern of SRS evolution in the counter tandem pumping configuration.Our findings revealed tha...In this study,we investigated the influence of fiber parameters on stimulated Raman scattering(SRS)and identified a unique pattern of SRS evolution in the counter tandem pumping configuration.Our findings revealed that the SRS threshold in counter-pumping is predominantly determined by the length of the output delivery fiber rather than the gain fiber.By employing the counter tandem pumping scheme and optimizing the fiber parameters,a 10 kW fiber laser was achieved with beam quality M^(2)of 1.92.No mode instability or severe SRS limitation was observed.To our knowledge,this study achieved the highest beam quality in over 10 kW fiber lasers based on conventional double-clad Yb-doped fiber.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61875223 and 11574349)the Natural Science Foundation of Hunan Province,China(Grant No.2018JJ3610)+1 种基金the Natural Science Foundation of Jiangsu Province,China(Grant Nos.BK20150365 and BK20170424)the Natural Science Foundation of Hainan Province,China(Grant No.117111)
文摘As a preferable material in the field of photo-detection and catalysis,the characteristics of FePS3 in broad wavelength range have been proven by many experimental studies.However,FePS3 has not been used as a saturable absorber(SA)in fiber lasers yet.We propose and demonstrate the generation of a single wavelength and dual-wavelength based on an Er-doped fiber laser(EDFL)at 1.5μm by using an innovative FePS3 saturable absorber for the first time.The result shows that a stable passively Q-switched pulse can be generated,which demonstrates that the new two-dimensional(2D)material FePS3 served as SA provides a valid method to realize passively Q-switched laser.In addition,we achieve the output of the dual-wavelength pulse by properly rotating the polarization controller.To the best of our knowledge,the dual-wavelength pulse EDFL could be applied in biomedicine,spectroscopy,and sensing research.
基金supported by the National Nature Science Foundation of China under Grant No.61322505Innovation Foundation for Graduates of National University of Defense Technology under Grant No.B130704
文摘A review on the progress of powerful 2 μm silica fiber sources in past decades is presented. We review the state-of-the-art records and representative achievements of 2 μm high-average-power continuous- wave, pulsed fiber lasers and amplifiers, and powerful superfluorescent sources. Challenges which limit the further power scaling of 2 μm silica fiber sources are discussed, including pumping brightness limitation, thermal problem and nonlinear effects. Potential and promising roadmaps to go beyond these limitations, like tandem pumping and beam combining, are discussed. Prospects of powerful 2 μm silica fiber sources are also presented in the end of paper.
基金Project supported by the China Postdoctoral Science Foundation(Grant No.2016M601586)the National Natural Science Foundation of China(Grant No.11404092)the Opening Funding of Hunan Provincial Key Laboratory of High Energy Laser Technology,China(Grant No.GNJGJS07)
文摘It is well-established that waves are inhomogeneous in a lossy isotropic medium, and the validation of the classical Snell's law is still questionable for light refraction at the dissipative and dispersive interface. With high absorption, direct experimental investigation is rather difficult due to the extremely short penetration depth; i.e., the skin depth. In this paper, a simple and unified description of this issue is proposed, which can be applied to both materials with anomalous dispersion and in the Drude region. The gradient ▽_k~ω is found to be incident angle θ_i-dependent, and the direction of the group velocity may deviate significantly from the phase velocity due to the loss induced permittivity structure. The physics behind the negative refraction effect is explained, and a novel loss induced super-prism effect is also predicted.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61735007 and 61505260)
文摘In this work, we investigate suppressing mode instability in detail by varying the seed power in a large mode area all-fiber amplifier with a fiber core diameter of 25 μm. The transverse mode instability(TMI) thresholds are systematically measured for different seed power. Our experimental results reveal that increasing the seed power has a positive influence on enhancing the output power before the TMI effect appears, and finally the TMI threshold is approximately doubled from1030 W to 2280 W when the seed power is increased from 27 W to 875 W. Almost 84.7% slope efficiency is reached with different seed power before the TMI threshold power. During our operation, we also find that in this type of LMA fiber the beam quality of the amplifier is degraded gradually instead of a sudden change as the pump power increases.
基金supported by the National Natural Science Foundation of China(Grant No.62305388)the Postgraduate Scientific Research Innovation Project of Hunan Province(Grant No.QL20230007).
文摘Orbital-angular-momentum(OAM)multiplexing technology offers a significant dimension to enlarge communication capacity in free-space optical links.The coherent beam combining(CBC)system can simultaneously realize OAM multiplexing and achieve high-power laser output,providing substantial advantages for long-distance communication.Herein,we present an integrated CBC system for freespace optical links based on OAM multiplexing and demultiplexing technologies for the first time,to the best of our knowledge.A method to achieve flexible OAM multiplexing and efficient demultiplexing based on the CBC system is proposed and demonstrated both theoretically and experimentally.The experimental results exhibit a low bit error rate of 0.47%and a high recognition precision of 98.58%throughout the entire data transmission process.By employing such an ingenious strategy,this work holds promising prospects for enriching ultra-long-distance structured light communication in the future.
基金sponsored by the National Natural Science Foundation of China (Nos. 61705264 and 61705265)
文摘An all-fiberized and narrow-bandwidth master oscillator power amplification(MOPA) system with record output power of 4 kW level and slope efficiency of 78% is demonstrated. Tandem pumping strategy is tentatively introduced into the narrow-bandwidth MOPA system for thermally induced mode instability(TMI) suppression. The stimulated Brillouin scattering(SBS) effect is balanced by simply using one-stage phase modulation technique. With different phase modulation signals, SBS limited output powers of 336 W, 1.2 kW and 3.94 kW are respectively achieved with spectral bandwidths accounting for 90% power of ～0.025, 0.17 and ～0.89 nm. Compared with our previous 976 nm pumping system, TMI threshold is overall boosted to be >5 times in which tandem pumping increases the TMI threshold of >3times. The beam quality(M～2 factor) of the output laser is well within 1.5 below the TMI threshold while it is ultimately saturated to be 1.86 with the influence of TMI at maximal output power. Except for SBS and TMI, stimulated Raman scattering(SRS) effect will be another challenge for further power scaling. In such a high power MOPA system, multidetrimental effects(SBS, SRS and TMI) will coexist and may be mutual-coupled, which could provide a well platform for further comprehensively investigating and optimizing the high power, narrow-bandwidth fiber amplifiers.
基金This work was supported by the National Natural Science Foundation of China(No.62005316)Director Fund of State Key Laboratory of Pulsed Power Laser Technology(No.SKL2020ZR02).
文摘An all-fiber high-power linearly polarized chirped pulse amplification(CPA)system is experimentally demonstrated.Through stretching the pulse duration to a full width of approximately 2 ns with two cascaded chirped fiber Bragg gratings(CFBGs),a maximum average output power of 612 W is achieved from a high-gain Yb-doped fiber that has a core diameter of 20μm with a slope efficiency of approximately 68%at the repetition rate of 80 MHz.At the maximum output power,the polarization degree is 92.5%and the M^(2)factor of the output beam quality is approximately 1.29;the slight performance degradations are attributed to the thermal effects in the main amplifier.By optimizing the B-integral of the amplifier and finely adjusting the higher-order dispersion of one of the CFBGs,the pulse width is compressed to 863 fs at the highest power with a compression efficiency of 72%,corresponding to a maximum compressed average power of 440.6 W,single pulse energy of 5.5μJ and peak power of about 4.67 MW.To the best of our knowledge,this is the highest average power of a femtosecond laser directly generated from an all-fiber linearly polarized CPA system.
基金supported by the Guangdong Key Research and Development Program(No.2018B090904001)the National Natural Science Foundations of China(Nos.62005313 and 61705264)+1 种基金the Innovative Research Team in Natural Science Foundation of Hunan Province(No.2019JJ10005)the Hunan Provincial Innovation Construct Project(No.2019RS3017)。
文摘In this paper,an all-fiberized and narrow-linewidth 5 kW power-level fiber amplifier is presented.The laser is achieved based on the master oscillator power amplification configuration,in which the phase-modulated single-frequency laser is applied as the seed laser and a bidirectional pumping configuration is applied in the power amplifier.The stimulated Brillouin scattering,stimulated Raman scattering,and transverse mode instability effects are all effectively suppressed in the experiment.Consequently,the output power is scaled up to 4.92 kW with a slope efficiency of as high as approximately 80%.The 3-dB spectral width is about 0.59 nm,and the beam quality is measured to be M^(2)~1.22 at maximum output power.Furthermore,we have also conducted a detailed spectral analysis on the spectral width of the signal laser,which reveals that the spectral wing broadening phenomenon could lead to the obvious decrease of the spectral purity at certain output power.Overall,this work could provide a reference for obtaining and optimizing high-power narrow-linewidth fiber lasers.
基金National Natural Science Foundation of China(NSFC)(61322505,61635005)
文摘In this paper, we propose and experimentally investigate a linearly polarized narrow-linewidth random fiber laser(RFL) operating at 1080 nm and boost the output power to kilowatt level with near-diffraction-limited beam quality using a master oscillation power amplifier. The RFL based on a half-opened cavity, which is composed of a linearly polarized narrow-linewidth fiber Bragg grating and a 500 m piece of polarization-maintained Ge-doped fiber, generates a 0.71 W seed laser with an 88 pm full width at half-maximum(FWHM) linewidth and a 22.5 dB polarization extinction ratio(PER) for power scaling. A two-stage fiber amplifier enhances the seed laser to the maximal 1.01 k W with a PER value of 17 dB and a beam quality of M_x^2=1.15 and M_y^2=1.13. No stimulated Brillouin scattering effect is observed at the ultimate power level, and the FWHM linewidth of the amplified random laser broadens linearly as a function of the output power with a coefficient of about 0.1237 pm∕W.To the best of our knowledge, this is the first demonstration of a linearly polarized narrow-linewidth RFL with even kilowatt-level near-diffraction-limited output, and further performance scaling is ongoing.
文摘We demonstrate a high power linearly polarized Raman fiber laser(RFL)pumped by an amplified spontaneous emission(ASE)source.Temporal-stable operation of RFL could be ensured owing to the employment of ASE,which mitigates the inherent intensity noise compared with the classic scheme adopting laser oscillator as pump source.In this experiment,the RFL has up to 119.5W output power,with central wavelength of 1129.2nm,and full width at half maximum(FWHM)linewidth of about 4.18nm.The polarization extinction ratio(PER)of the Raman laser is about 23dB.Moreover,this laser has excellent long-term and short-term stabilities in terms of the output power and time domain.
基金supported by the National Key Research and Development Program of China(No.2017YFF0104603)in part by the Huo Ying-Dong Education Foundation of China(No.151062)+1 种基金in part by the National Natural Science Foundation of China(Nos.61705264 and 61705265)in part by the Postgraduate Research and Innovation Project of Hunan Province(No.CX2016B031)
文摘An all-fiberized high-average-power narrow linewidth ns pulsed laser with linear polarization is demonstrated. The laser system utilizes a typical master oscillator power amplifier(MOPA) configuration. The stimulated Brillouin scattering(SBS) is effectively suppressed due to the short fiber length and large mode area in the main amplifier, combined with the narrow pulse duration smaller than the phonon lifetime of SBS effect. A maximal output power of 466 W is obtained with a narrow linewidth of ～203.6 MHz, and the corresponding slope efficiency is ～80.3%. The pulse duration is condensed to be ～4 ns after the amplification, corresponding to the peak power of 8.8 kW and the pulse energy of 46.6 μJ. Neardiffraction-limited beam quality with an M2 factor of 1.32 is obtained at the output power of 442 W and the mode instability(MI) is observed at the maximal output power. To the best of our knowledge, this is the highest average output power of the all-fiberized narrow linewidth ns pulsed fiber laser with linear polarization and high beam quality, which is a promising source for the nonlinear frequency conversion, laser lidar, and so on.
基金National Natural Science Foundation of China(NSFC)(61635005)Natural Science Foundation of Hunan Province(2018JJ3588)Huo Yingdong Education Foundation(151062)
文摘Optical signal-to-noise ratio(OSNR) is one of the most significant parameters for the performance characterization of random fiber lasers(RFLs) and their application potentiality in sensing and telecommunication. An effective way to improve the OSNR of RFLs is pump scheme optimization, for example, employing a temporally stable source as the pump. In this paper, the output performance of an incoherently pumped RFL dependence on the pump bandwidth has been investigated both in experiment and theory. It is found that a high-OSNR RFL can be achieved with broadband amplified spontaneous emission(ASE) source pumping, and a relatively broad pump bandwidth can also help suppress the spectral broadening while maintaining an ultra-high spectral purity.By optimizing the pump bandwidth to ~10 nm, maximum OSNR of ~39 dB(corresponding to a spectral purity of ~99.96%) with more than 99 W output power can be obtained. Moreover, for the pump bandwidth of 0.6–40 nm, the spectral purity can reach as high as >99% with the pump power ranging from ~85 to ~117 W.In addition, with the aid of theoretical simulation based on a modified power balance model, we find that the increment of pump bandwidth can decrease the effective Raman gain coefficient, further influencing the gain characteristics, nonlinear effects, and eventually the output performance. This work provides new insight into the influence of the pump characteristics on the output performance of incoherently pumped RFLs.
基金supported in part by the National Natural Science Foundation of China (No. 61322505)the Foundation for the author of National Excellent Doctoral Dissertation of China (No. 201329)+1 种基金the Huo Yingdong Education Foundation of China (No. 151062)the Hunan Provincial Innovation Foundation for Postgraduate Student (No. CX2017B030)
文摘High power superfluorescent fiber sources(SFSs), which could find wide applications in many fields such as middle infrared laser generation, Raman fiber laser pumping and spectral beam combination, have experienced a flourishing time in recent years for its unique properties, such as short coherence length and high temporal stability. The challenge for performance scalability of powerful SFS mainly lies on the physical issues including parasitic laser oscillation and modal instability(MI). In this contribution, by employing in-band pumping avenue and high-order transverse-mode management, we explore a high power SFS with record power, near-diffraction-limited beam quality and spectral manipulation flexibility. An ultimate output power of 3.14 kW can be obtained with high temporal stability and a beam quality of M^2= 1.59 for the amplified light. Furthermore, the dynamics of spectral evolutions, including redshifting of central wavelength and unsymmetrical broadening in spectral wings, of the main amplifier with different seed linewidths are investigated contrastively. Benefiting from the unique high pump brightness and high MI threshold of in-band pumping scheme, the demonstrated system also manifests promising performance scaling potential.
基金supported in part by the National Key Research and Development Program of China(No.2022YFB3606000)in part by State Key Laboratory of Pulsed Power Laser Technology(No.SKL2020ZR02).
文摘In this paper,we report a coherent beam combining(CBC)system that involves two thulium-doped all-polarization maintaining(PM)fiber chirped pulse amplifiers.Through phase-locking the two channels via a fiber stretcher by using the stochastic parallel gradient descent(SPGD)algorithm,a maximum average power of 265 W is obtained,with a CBC efficiency of 81%and a residual phase error of λ/17.After de-chirping by a pair of diffraction gratings,the duration of the combined laser pulse is compressed to 690 fs.Taking into account the compression efficiency of 90%and the main peak energy proportion of 91%,the corresponding peak power is calculated to be 4 MW.The laser noise characteristics before and after CBC are examined,and the results indicate that the CBC would degrade the low frequency relative intensity noise(RIN),of which the integration is 1.74%in[100 Hz,2 MHz]at the maximum combined output power.In addition,the effects of the nonlinear spectrum broadening during chirped pulse amplification on the CBC efficiency are also investigated,showing that a higher extent of pulse stretching is effective in alleviating the spectrum broadening and realizing a higher output power with decent combining efficiency.
基金the National Natural Science Foundation of China(NSFC)(No.61905284)the National Postdoctoral Program for Innovative Talents(No.BX20190063)the Innovation Group of Hunan Province,China(No.2019JJ10005)。
文摘The quantum defect(QD)is an important issue that demands prompt attention in high-power fiber lasers.A large QD may aggravate the thermal load in the laser,which would impact the frequency,amplitude noise and mode stability,and threaten the security of the high-power laser system.Here,we propose and demonstrate a cladding-pumped Raman fiber laser(RFL)with QD of less than 1%.Using the Raman gain of the boson peak in a phosphorus-doped fiber to enable the cladding pump,the QD is reduced to as low as 0.78%with a 23.7 W output power.To our knowledge,this is the lowest QD ever reported in a cladding-pumped RFL.Furthermore,the output power can be scaled to 47.7 W with a QD of 1.29%.This work not only offers a preliminary platform for the realization of high-power low-QD fiber lasers,but also proves the great potential of low-QD fiber lasers in power scaling.
基金supported by the National Key Research and Development Program of China(No.2022YFB3606000)the National Natural Science Foundation of China(Nos.62035015 and 62305390)。
文摘In this study,we investigated the influence of fiber parameters on stimulated Raman scattering(SRS)and identified a unique pattern of SRS evolution in the counter tandem pumping configuration.Our findings revealed that the SRS threshold in counter-pumping is predominantly determined by the length of the output delivery fiber rather than the gain fiber.By employing the counter tandem pumping scheme and optimizing the fiber parameters,a 10 kW fiber laser was achieved with beam quality M^(2)of 1.92.No mode instability or severe SRS limitation was observed.To our knowledge,this study achieved the highest beam quality in over 10 kW fiber lasers based on conventional double-clad Yb-doped fiber.
