The effect of Ar pressure on the performance of W/Si multilayers is investigated. W/Si multilayers were deposited by a high vacuum DC magnetron sputtering system. The Ar pressure was changed from 1.0 to 5.0 mTorr with...The effect of Ar pressure on the performance of W/Si multilayers is investigated. W/Si multilayers were deposited by a high vacuum DC magnetron sputtering system. The Ar pressure was changed from 1.0 to 5.0 mTorr with an interval of 1.0 mTorr during the deposition process. Electron probe microanalysis and Rutherford backscattering are performed to determine the Ar content incorporated within these multilayers. The results demonstrate that less Ar is incorporated within the sample when more Ar is used in the plasma, which could be explained by the increase of the collision probability and the decrease in the kinetic energy of Ar ions arriving at the substrate when more Ar exists. The grazing incident X-ray reflectivity （GIXR） at 0.154 nm is used to determine the structural parameters of the layers. The results show that the structures of these multilayers prepared at different Ar pressure are very similar and that the interface roughness increases quickly when the Ar pressure is higher than 3.0 mTorr. The measurements of the extreme ultraviolet （EUV） reflectivity indicate that the reflectivity decreases when Ar pressure increases. The fitting results of GIXR and EUV refiectivity curves indicate that with an increase of Ar pressure, the density and decrement of the refractive index are increased for W and decreased for Si, which is mainly due to （1） the decrease in Ar content incorporated within these multilayers which affects their performance and （2） the increase of collision probability for sputtered W and Si, the decrease of their average kinetic energy arriving at the substrate, and thus the loosing of their layers.展开更多
We report on the optical performance, structure and thermal stability of periodic multilayer films con- taining Zr and Al（lwt.-%Si） or Al（pure） layers designed for the use as extreme ultraviolet （EUV） high refle...We report on the optical performance, structure and thermal stability of periodic multilayer films con- taining Zr and Al（lwt.-%Si） or Al（pure） layers designed for the use as extreme ultraviolet （EUV） high reflective mirrors in the range of 1~19 am. The comparison of A1/Zr （Al（lwt.-%Si）/Zr and Al（pure）/Zr） multilayers fabricated by direct-current magnetron sputtering shows that the optical and structural per- formances of two systems have much difference because of Si doped in A1. From the results of grazing incidence X-ray reflection （GIXR）, X-ray diffraction （XRD）, and EUV, the Si can disfavor the crystalliza- tion of AI and smooth the interface, consequently increase the reflectance of EUV in the Al（lwt.-%Si）/Zr systems. For the thermal stability of two systems, the first significant structural changes appear at 250 ~C. The interlayers are transformed from symmetrical to asymmetrical, where the Zr-on-A1 interlayers are thicker than Al-on-Zr interlayers. At 295 ~C for Al（pure）/Zr and 298 ~C for Al（lwt.-%Si）/Zr, the interfaces consist of amorphous Al-Zr alloy transform to polycrystalline Al-Zr alloy which can decrease the surface roughness and smooth the interfaces. Above 300 ~C, the interdiffusion becomes larger, which can enlarge the differences between Zr-on-Al and Al-on-Zr interlayers. Based on the analyses, the Si doped in Al cannot only influence the optical and structural performances of Al/Zr systems, but also impact the reaction temperatures in the annealing process.展开更多
基金Supported by National Basic Research Program of China (2011CB922203)National Natural Science Foundation of China(11061130549)+1 种基金National International Cooperation Program between China and Japan (2008DFA01920)Shanghai Natural Science Foundation (09XD1404000)
文摘The effect of Ar pressure on the performance of W/Si multilayers is investigated. W/Si multilayers were deposited by a high vacuum DC magnetron sputtering system. The Ar pressure was changed from 1.0 to 5.0 mTorr with an interval of 1.0 mTorr during the deposition process. Electron probe microanalysis and Rutherford backscattering are performed to determine the Ar content incorporated within these multilayers. The results demonstrate that less Ar is incorporated within the sample when more Ar is used in the plasma, which could be explained by the increase of the collision probability and the decrease in the kinetic energy of Ar ions arriving at the substrate when more Ar exists. The grazing incident X-ray reflectivity （GIXR） at 0.154 nm is used to determine the structural parameters of the layers. The results show that the structures of these multilayers prepared at different Ar pressure are very similar and that the interface roughness increases quickly when the Ar pressure is higher than 3.0 mTorr. The measurements of the extreme ultraviolet （EUV） reflectivity indicate that the reflectivity decreases when Ar pressure increases. The fitting results of GIXR and EUV refiectivity curves indicate that with an increase of Ar pressure, the density and decrement of the refractive index are increased for W and decreased for Si, which is mainly due to （1） the decrease in Ar content incorporated within these multilayers which affects their performance and （2） the increase of collision probability for sputtered W and Si, the decrease of their average kinetic energy arriving at the substrate, and thus the loosing of their layers.
文摘We report on the optical performance, structure and thermal stability of periodic multilayer films con- taining Zr and Al（lwt.-%Si） or Al（pure） layers designed for the use as extreme ultraviolet （EUV） high reflective mirrors in the range of 1~19 am. The comparison of A1/Zr （Al（lwt.-%Si）/Zr and Al（pure）/Zr） multilayers fabricated by direct-current magnetron sputtering shows that the optical and structural per- formances of two systems have much difference because of Si doped in A1. From the results of grazing incidence X-ray reflection （GIXR）, X-ray diffraction （XRD）, and EUV, the Si can disfavor the crystalliza- tion of AI and smooth the interface, consequently increase the reflectance of EUV in the Al（lwt.-%Si）/Zr systems. For the thermal stability of two systems, the first significant structural changes appear at 250 ~C. The interlayers are transformed from symmetrical to asymmetrical, where the Zr-on-A1 interlayers are thicker than Al-on-Zr interlayers. At 295 ~C for Al（pure）/Zr and 298 ~C for Al（lwt.-%Si）/Zr, the interfaces consist of amorphous Al-Zr alloy transform to polycrystalline Al-Zr alloy which can decrease the surface roughness and smooth the interfaces. Above 300 ~C, the interdiffusion becomes larger, which can enlarge the differences between Zr-on-Al and Al-on-Zr interlayers. Based on the analyses, the Si doped in Al cannot only influence the optical and structural performances of Al/Zr systems, but also impact the reaction temperatures in the annealing process.
