In order to obtain a uniform and effectively toughened poly(lactic acid)film by blending with low content of poly(ethylene octene)(POE)with high elasticity,the tailored interfacial intermolecular interaction and entan...In order to obtain a uniform and effectively toughened poly(lactic acid)film by blending with low content of poly(ethylene octene)(POE)with high elasticity,the tailored interfacial intermolecular interaction and entanglement between the two phases of the PLA/POE blend was innovatively constructed via the facile reactive melt blending process through the reaction of the epoxy/anhydride groups grafted on the POE chains with the end groups of PLA chains(PLA/GPOE-MPOE).It was observed that POE domains were embedded tightly in PLA matrix with a fuzzy interface and abundant interface transition area,and the impact fractured surface of the blend showed an obvious plastic deformation with less occurrence of fibrillation of PLA matrix or interfacial de-bonding.Compared with neat PLA and directly blended PLA/POE blends,the PLA/GPOE-MPOE blend exhibited much higher complex viscosity/storage modulus,much lower tanδvalues in the terminal region,and obvious strain-hardening behavior.The deviation in viscoelastic behavior of PLA/GPOE-MPOE from linear PLA indicated the enhanced molecular entanglement between the long-branched chains,resulting in an enhancement of the stretching ability during biaxial drawing of the blend.Uniform PLA/GPOE-MPOE films with draw ratio as high as 7×7 were obtained through biaxial stretching,which showed much higher tensile strength and the elongation at break than that of neat PLA and PLA/POE film.This work provides a facile method for fabricating toughening PLA films with application potentials.展开更多
The isotactic polypropylene(iPP) usually shows a unique parent-daughter lamellae structure in which the parent and daughter lamellae are against each other with a near perpendicular angle(80° or 100°). Induc...The isotactic polypropylene(iPP) usually shows a unique parent-daughter lamellae structure in which the parent and daughter lamellae are against each other with a near perpendicular angle(80° or 100°). Inducing a high fraction of oriented cross-hatched structure in iPP during processing is desirable for designing the bi-oriented iPP products. We processed a commercial iPP via tensile-stretching and die-drawing to evaluate the structural evolution of oriented parent-daughter lamellae. It turned out that the die-drawing process had an advantage in attaining a high fraction of oriented cross-hatched structure of iPP, as compared to the free tensile stretching. Besides, the presence of α-nucleating agents affected the formation of oriented parent-daughter lamellae in the die-drawn samples whereas such influence diminished in the free stretched ones. It was found that the confined deformation inside the die led to the well-preserved oriented cross-hatched structure in the die-drawn iPP.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51773122 and No.51933007)the International Scientific and Technological Cooperation Project of Sichuan Province(No.2020YFH0084)
文摘In order to obtain a uniform and effectively toughened poly(lactic acid)film by blending with low content of poly(ethylene octene)(POE)with high elasticity,the tailored interfacial intermolecular interaction and entanglement between the two phases of the PLA/POE blend was innovatively constructed via the facile reactive melt blending process through the reaction of the epoxy/anhydride groups grafted on the POE chains with the end groups of PLA chains(PLA/GPOE-MPOE).It was observed that POE domains were embedded tightly in PLA matrix with a fuzzy interface and abundant interface transition area,and the impact fractured surface of the blend showed an obvious plastic deformation with less occurrence of fibrillation of PLA matrix or interfacial de-bonding.Compared with neat PLA and directly blended PLA/POE blends,the PLA/GPOE-MPOE blend exhibited much higher complex viscosity/storage modulus,much lower tanδvalues in the terminal region,and obvious strain-hardening behavior.The deviation in viscoelastic behavior of PLA/GPOE-MPOE from linear PLA indicated the enhanced molecular entanglement between the long-branched chains,resulting in an enhancement of the stretching ability during biaxial drawing of the blend.Uniform PLA/GPOE-MPOE films with draw ratio as high as 7×7 were obtained through biaxial stretching,which showed much higher tensile strength and the elongation at break than that of neat PLA and PLA/POE film.This work provides a facile method for fabricating toughening PLA films with application potentials.
基金financially supported by the National Natural Science Foundation of China(Nos.21704102,U1832186,and 51525305)Newton Advanced Fellowship of the Royal Society,United Kingdom(No.NA150222)ExxonMobil Asia Pacific Research&Development Co.,Ltd。
文摘The isotactic polypropylene(iPP) usually shows a unique parent-daughter lamellae structure in which the parent and daughter lamellae are against each other with a near perpendicular angle(80° or 100°). Inducing a high fraction of oriented cross-hatched structure in iPP during processing is desirable for designing the bi-oriented iPP products. We processed a commercial iPP via tensile-stretching and die-drawing to evaluate the structural evolution of oriented parent-daughter lamellae. It turned out that the die-drawing process had an advantage in attaining a high fraction of oriented cross-hatched structure of iPP, as compared to the free tensile stretching. Besides, the presence of α-nucleating agents affected the formation of oriented parent-daughter lamellae in the die-drawn samples whereas such influence diminished in the free stretched ones. It was found that the confined deformation inside the die led to the well-preserved oriented cross-hatched structure in the die-drawn iPP.
