期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
醇胺与羧酸阻锈剂分子的构效评估与机理分析 被引量:4
1
作者 周扬 黄家乐 +2 位作者 蔡景顺 彭泽川 缪昌文 《中国公路学报》 EI CAS CSCD 北大核心 2020年第11期195-204,共10页
钢筋阻锈剂是一种高性价比的钢筋防腐材料,在桥梁钢筋混凝土结构中应用广泛。有机阻锈剂的阻锈效率主要取决于其分子结构,然而受仪器设备分辨率所限,目前的相关研究多集中于宏观尺度的电化学响应分析,较少涉及微纳尺度的阻锈机理分析。... 钢筋阻锈剂是一种高性价比的钢筋防腐材料,在桥梁钢筋混凝土结构中应用广泛。有机阻锈剂的阻锈效率主要取决于其分子结构,然而受仪器设备分辨率所限,目前的相关研究多集中于宏观尺度的电化学响应分析,较少涉及微纳尺度的阻锈机理分析。因此,基于分子动力学技术,分别建立了阻锈剂与钢筋钝化膜的纳观尺度模型,模拟了醇胺类、羧酸类阻锈剂分子与钢筋钝化膜间的界面交互作用,揭示了原子尺度上的阻锈机理。基于阻锈剂-钝化膜分子动力学模型对其阻锈响应规律进行分析,确定2种有机分子均可有效阻碍氯离子在钢筋钝化膜表面的吸附和点蚀,其中羧酸类阻锈剂的阻锈效率更佳(75.8%)。通过深入探究2种阻锈剂与钢筋钝化膜基体吸附差异,研究发现:高极性的羧基官能团可与钢筋钝化膜表面的羟基发生强烈的静电吸引作用,使得羧酸类分子稳定地吸附在钝化膜表面,氯离子的吸附位点被大量占据,因而阻锈效率较高;而醇胺类分子由于官能团极性较弱,在界面上的吸附作用不显著;同时,分子模拟证明,阻锈剂中的极性官能团还能直接吸引氯离子,这一机制同样抑制了氯离子在钢筋表面的吸附和破坏;此外,电化学试验的结果与分子模拟一致,这表明分子模拟技术可在有机阻锈剂的分子设计与评估中发挥重要作用,继而为钢筋混凝土结构的耐久性设计提供科学依据与技术手段。 展开更多
关键词 桥梁工程 有机阻锈剂 分子动力学 分子构效关系 阻锈机理
原文传递
脱硫石膏基超硫酸盐水泥混凝土强度和抗碳化性能研究 被引量:7
2
作者 王亮 周扬 +2 位作者 彭泽川 陈鲁川 孙启亮 《混凝土与水泥制品》 2022年第3期85-90,共6页
研究了水泥用量、水胶比、砂率对超硫酸盐水泥混凝土力学性能和抗碳化性能的影响,采用X射线衍射(XRD)、扫描电镜(SEM)、傅里叶红外光谱(FT-IR)测试方法对比分析了超硫酸盐水泥混凝土与矿渣水泥混凝土的微观形貌和水化产物的差异。结果表... 研究了水泥用量、水胶比、砂率对超硫酸盐水泥混凝土力学性能和抗碳化性能的影响,采用X射线衍射(XRD)、扫描电镜(SEM)、傅里叶红外光谱(FT-IR)测试方法对比分析了超硫酸盐水泥混凝土与矿渣水泥混凝土的微观形貌和水化产物的差异。结果表明:当水泥用量为8%时,超硫酸盐水泥混凝土的力学性能较佳,但抗碳化性能较差;当水胶比为0.35时,超硫酸盐水泥混凝土的性能最佳;当砂率为40%时,超硫酸盐水泥混凝土的性能最佳;超硫酸盐水泥的主要水化产物是AFt和C-S-H凝胶,缺少硅酸盐水泥中常见的Ca(OH)2;相较于矿渣水泥混凝土,超硫酸盐水泥混凝土的微观结构致密性较差。 展开更多
关键词 超硫酸盐水泥混凝土 配合比 力学性能 碳化深度 水化产物 微观形貌
在线阅读 下载PDF
A molecular dynamics study of calcium silicate hydrates-aggregate interfacial interactions and influence of moisture 被引量:5
3
作者 ZHOU Yang peng ze-chuan +3 位作者 HUANG Jia-le MA Tao HUANG Xiao-ming MIAO Chang-wen 《Journal of Central South University》 SCIE EI CAS CSCD 2021年第1期16-28,共13页
The interface properties between hydrated cement paste(hcp)and aggregates largely determine the various performances of concrete.In this work,molecular dynamics simulations were employed to explore the atomistic inter... The interface properties between hydrated cement paste(hcp)and aggregates largely determine the various performances of concrete.In this work,molecular dynamics simulations were employed to explore the atomistic interaction mechanisms between the commonly used aggregate phase calcite/silica and calcium silicate hydrates(C-S-H),as well as the effect of moisture.The results suggest that the C-S-H/calcite interface is relatively strong and stable under both dry and moist conditions,which is caused by the high-strength interfacial connections formed between calcium ions from calcite and high-polarity non-bridging oxygen atoms from the C-S-H surface.Silica can be also adsorbed on the dry C-S-H surface by the H-bonds;however,the presence of water molecules on the interface may substantially decrease the affinities.Furthermore,the dynamics interface separation tests of C-S-H/aggregates were also implemented by molecular dynamics.The shape of the calculated stress-separation distance curves obeys the quasi-static cohesive law obtained experimentally.The moisture conditions and strain rates were found to affect the separation process of C-S-H/silica.A wetter interface and smaller loading rate may lead to a lower adhesion strength.The mechanisms interpreted here may shed new lights on the understandings of hcp/aggregate interactions at a nano-length scale and creation of high performance cementitious materials. 展开更多
关键词 calcium silicate hydrate AGGREGATE interfacial connections molecular dynamics simulation MOISTURE
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部